From ce6bc92285cabd0df1f154a9ef5aeb937b6de57e Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Fri, 12 Aug 2011 20:12:33 +0200 Subject: [PATCH] MIPS: Alchemy: abstract USB block control register access Alchemy chips have one or more registers which control access to the usb blocks as well as PHY configuration. I don't want the OHCI/EHCI glues to know about the different registers and bits; new code hides the gory details of USB configuration from them. Signed-off-by: Manuel Lauss To: Linux-MIPS Cc: linux-usb@vger.kernel.org Acked-by: Greg Kroah-Hartman Patchwork: https://patchwork.linux-mips.org/patch/2709/ Signed-off-by: Ralf Baechle create mode 100644 drivers/usb/host/alchemy-common.c --- arch/mips/alchemy/common/dma.c | 12 +- arch/mips/alchemy/common/power.c | 42 --- arch/mips/include/asm/mach-au1x00/au1000.h | 84 ++--- drivers/usb/host/Makefile | 1 + drivers/usb/host/alchemy-common.c | 337 +++++++++++++++++++++ drivers/usb/host/ehci-au1xxx.c | 77 +---- drivers/usb/host/ohci-au1xxx.c | 110 +------ 7 files changed, 382 insertions(+), 281 deletions(-) create mode 100644 drivers/usb/host/alchemy-common.c diff --git a/arch/mips/alchemy/common/dma.c b/arch/mips/alchemy/common/dma.c index 347980e79a89..6652a237b920 100644 --- a/arch/mips/alchemy/common/dma.c +++ b/arch/mips/alchemy/common/dma.c @@ -88,12 +88,12 @@ static const struct dma_dev { { AU1000_AC97_PHYS_ADDR + 0x08, DMA_DW16 | DMA_DR }, /* AC97 RX c */ { AU1000_UART3_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* UART3_TX */ { AU1000_UART3_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* UART3_RX */ - { AU1000_USBD_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* EP0RD */ - { AU1000_USBD_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* EP0WR */ - { AU1000_USBD_PHYS_ADDR + 0x08, DMA_DW8 | DMA_NC }, /* EP2WR */ - { AU1000_USBD_PHYS_ADDR + 0x0c, DMA_DW8 | DMA_NC }, /* EP3WR */ - { AU1000_USBD_PHYS_ADDR + 0x10, DMA_DW8 | DMA_NC | DMA_DR }, /* EP4RD */ - { AU1000_USBD_PHYS_ADDR + 0x14, DMA_DW8 | DMA_NC | DMA_DR }, /* EP5RD */ + { AU1000_USB_UDC_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* EP0RD */ + { AU1000_USB_UDC_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* EP0WR */ + { AU1000_USB_UDC_PHYS_ADDR + 0x08, DMA_DW8 | DMA_NC }, /* EP2WR */ + { AU1000_USB_UDC_PHYS_ADDR + 0x0c, DMA_DW8 | DMA_NC }, /* EP3WR */ + { AU1000_USB_UDC_PHYS_ADDR + 0x10, DMA_DW8 | DMA_NC | DMA_DR }, /* EP4RD */ + { AU1000_USB_UDC_PHYS_ADDR + 0x14, DMA_DW8 | DMA_NC | DMA_DR }, /* EP5RD */ /* on Au1500, these 2 are DMA_REQ2/3 (GPIO208/209) instead! */ { AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC}, /* I2S TX */ { AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC | DMA_DR}, /* I2S RX */ diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c index 9ec85597bbf3..bdd6651e9a4f 100644 --- a/arch/mips/alchemy/common/power.c +++ b/arch/mips/alchemy/common/power.c @@ -47,7 +47,6 @@ * We only have to save/restore registers that aren't otherwise * done as part of a driver pm_* function. */ -static unsigned int sleep_usb[2]; static unsigned int sleep_sys_clocks[5]; static unsigned int sleep_sys_pinfunc; static unsigned int sleep_static_memctlr[4][3]; @@ -55,31 +54,6 @@ static unsigned int sleep_static_memctlr[4][3]; static void save_core_regs(void) { -#ifndef CONFIG_SOC_AU1200 - /* Shutdown USB host/device. */ - sleep_usb[0] = au_readl(USB_HOST_CONFIG); - - /* There appears to be some undocumented reset register.... */ - au_writel(0, 0xb0100004); - au_sync(); - au_writel(0, USB_HOST_CONFIG); - au_sync(); - - sleep_usb[1] = au_readl(USBD_ENABLE); - au_writel(0, USBD_ENABLE); - au_sync(); - -#else /* AU1200 */ - - /* enable access to OTG mmio so we can save OTG CAP/MUX. - * FIXME: write an OTG driver and move this stuff there! - */ - au_writel(au_readl(USB_MSR_BASE + 4) | (1 << 6), USB_MSR_BASE + 4); - au_sync(); - sleep_usb[0] = au_readl(0xb4020020); /* OTG_CAP */ - sleep_usb[1] = au_readl(0xb4020024); /* OTG_MUX */ -#endif - /* Clocks and PLLs. */ sleep_sys_clocks[0] = au_readl(SYS_FREQCTRL0); sleep_sys_clocks[1] = au_readl(SYS_FREQCTRL1); @@ -123,22 +97,6 @@ static void restore_core_regs(void) au_writel(sleep_sys_pinfunc, SYS_PINFUNC); au_sync(); -#ifndef CONFIG_SOC_AU1200 - au_writel(sleep_usb[0], USB_HOST_CONFIG); - au_writel(sleep_usb[1], USBD_ENABLE); - au_sync(); -#else - /* enable access to OTG memory */ - au_writel(au_readl(USB_MSR_BASE + 4) | (1 << 6), USB_MSR_BASE + 4); - au_sync(); - - /* restore OTG caps and port mux. */ - au_writel(sleep_usb[0], 0xb4020020 + 0); /* OTG_CAP */ - au_sync(); - au_writel(sleep_usb[1], 0xb4020020 + 4); /* OTG_MUX */ - au_sync(); -#endif - /* Restore the static memory controller configuration. */ au_writel(sleep_static_memctlr[0][0], MEM_STCFG0); au_writel(sleep_static_memctlr[0][1], MEM_STTIME0); diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h index f260ebed713b..3b0a1e774dc9 100644 --- a/arch/mips/include/asm/mach-au1x00/au1000.h +++ b/arch/mips/include/asm/mach-au1x00/au1000.h @@ -245,6 +245,15 @@ void alchemy_sleep_au1000(void); void alchemy_sleep_au1550(void); void au_sleep(void); +/* USB: drivers/usb/host/alchemy-common.c */ +enum alchemy_usb_block { + ALCHEMY_USB_OHCI0, + ALCHEMY_USB_UDC0, + ALCHEMY_USB_EHCI0, + ALCHEMY_USB_OTG0, +}; +int alchemy_usb_control(int block, int enable); + /* SOC Interrupt numbers */ @@ -687,7 +696,8 @@ enum soc_au1200_ints { */ #define AU1000_AC97_PHYS_ADDR 0x10000000 /* 012 */ -#define AU1000_USBD_PHYS_ADDR 0x10200000 /* 0123 */ +#define AU1000_USB_OHCI_PHYS_ADDR 0x10100000 /* 012 */ +#define AU1000_USB_UDC_PHYS_ADDR 0x10200000 /* 0123 */ #define AU1000_IC0_PHYS_ADDR 0x10400000 /* 01234 */ #define AU1000_MAC0_PHYS_ADDR 0x10500000 /* 023 */ #define AU1000_MAC1_PHYS_ADDR 0x10510000 /* 023 */ @@ -710,12 +720,17 @@ enum soc_au1200_ints { #define AU1550_DBDMA_CONF_PHYS_ADDR 0x14003000 /* 34 */ #define AU1000_MACDMA0_PHYS_ADDR 0x14004000 /* 0123 */ #define AU1000_MACDMA1_PHYS_ADDR 0x14004200 /* 0123 */ +#define AU1550_USB_OHCI_PHYS_ADDR 0x14020000 /* 3 */ +#define AU1200_USB_CTL_PHYS_ADDR 0x14020000 /* 4 */ +#define AU1200_USB_OTG_PHYS_ADDR 0x14020020 /* 4 */ +#define AU1200_USB_OHCI_PHYS_ADDR 0x14020100 /* 4 */ +#define AU1200_USB_EHCI_PHYS_ADDR 0x14020200 /* 4 */ +#define AU1200_USB_UDC_PHYS_ADDR 0x14022000 /* 4 */ #ifdef CONFIG_SOC_AU1000 #define MEM_PHYS_ADDR 0x14000000 #define STATIC_MEM_PHYS_ADDR 0x14001000 -#define USBH_PHYS_ADDR 0x10100000 #define IRDA_PHYS_ADDR 0x10300000 #define SSI0_PHYS_ADDR 0x11600000 #define SSI1_PHYS_ADDR 0x11680000 @@ -729,7 +744,6 @@ enum soc_au1200_ints { #ifdef CONFIG_SOC_AU1500 #define MEM_PHYS_ADDR 0x14000000 #define STATIC_MEM_PHYS_ADDR 0x14001000 -#define USBH_PHYS_ADDR 0x10100000 #define PCI_PHYS_ADDR 0x14005000 #define PCI_MEM_PHYS_ADDR 0x400000000ULL #define PCI_IO_PHYS_ADDR 0x500000000ULL @@ -745,7 +759,6 @@ enum soc_au1200_ints { #ifdef CONFIG_SOC_AU1100 #define MEM_PHYS_ADDR 0x14000000 #define STATIC_MEM_PHYS_ADDR 0x14001000 -#define USBH_PHYS_ADDR 0x10100000 #define IRDA_PHYS_ADDR 0x10300000 #define SSI0_PHYS_ADDR 0x11600000 #define SSI1_PHYS_ADDR 0x11680000 @@ -760,7 +773,6 @@ enum soc_au1200_ints { #ifdef CONFIG_SOC_AU1550 #define MEM_PHYS_ADDR 0x14000000 #define STATIC_MEM_PHYS_ADDR 0x14001000 -#define USBH_PHYS_ADDR 0x14020000 #define PCI_PHYS_ADDR 0x14005000 #define PE_PHYS_ADDR 0x14008000 #define PSC0_PHYS_ADDR 0x11A00000 @@ -783,8 +795,6 @@ enum soc_au1200_ints { #define STATIC_MEM_PHYS_ADDR 0x14001000 #define AES_PHYS_ADDR 0x10300000 #define CIM_PHYS_ADDR 0x14004000 -#define USBM_PHYS_ADDR 0x14020000 -#define USBH_PHYS_ADDR 0x14020100 #define PSC0_PHYS_ADDR 0x11A00000 #define PSC1_PHYS_ADDR 0x11B00000 #define LCD_PHYS_ADDR 0x15000000 @@ -868,21 +878,6 @@ enum soc_au1200_ints { #define USB_EHCI_LEN 0x100 #define USB_UDC_BASE 0x14022000 #define USB_UDC_LEN 0x2000 -#define USB_MSR_BASE 0xB4020000 -#define USB_MSR_MCFG 4 -#define USBMSRMCFG_OMEMEN 0 -#define USBMSRMCFG_OBMEN 1 -#define USBMSRMCFG_EMEMEN 2 -#define USBMSRMCFG_EBMEN 3 -#define USBMSRMCFG_DMEMEN 4 -#define USBMSRMCFG_DBMEN 5 -#define USBMSRMCFG_GMEMEN 6 -#define USBMSRMCFG_OHCCLKEN 16 -#define USBMSRMCFG_EHCCLKEN 17 -#define USBMSRMCFG_UDCCLKEN 18 -#define USBMSRMCFG_PHYPLLEN 19 -#define USBMSRMCFG_RDCOMB 30 -#define USBMSRMCFG_PFEN 31 #define FOR_PLATFORM_C_USB_HOST_INT AU1200_USB_INT @@ -963,51 +958,6 @@ enum soc_au1200_ints { #define USB_OHCI_LEN 0x00100000 #endif -#ifndef CONFIG_SOC_AU1200 - -/* USB Device Controller */ -#define USBD_EP0RD 0xB0200000 -#define USBD_EP0WR 0xB0200004 -#define USBD_EP2WR 0xB0200008 -#define USBD_EP3WR 0xB020000C -#define USBD_EP4RD 0xB0200010 -#define USBD_EP5RD 0xB0200014 -#define USBD_INTEN 0xB0200018 -#define USBD_INTSTAT 0xB020001C -# define USBDEV_INT_SOF (1 << 12) -# define USBDEV_INT_HF_BIT 6 -# define USBDEV_INT_HF_MASK (0x3f << USBDEV_INT_HF_BIT) -# define USBDEV_INT_CMPLT_BIT 0 -# define USBDEV_INT_CMPLT_MASK (0x3f << USBDEV_INT_CMPLT_BIT) -#define USBD_CONFIG 0xB0200020 -#define USBD_EP0CS 0xB0200024 -#define USBD_EP2CS 0xB0200028 -#define USBD_EP3CS 0xB020002C -#define USBD_EP4CS 0xB0200030 -#define USBD_EP5CS 0xB0200034 -# define USBDEV_CS_SU (1 << 14) -# define USBDEV_CS_NAK (1 << 13) -# define USBDEV_CS_ACK (1 << 12) -# define USBDEV_CS_BUSY (1 << 11) -# define USBDEV_CS_TSIZE_BIT 1 -# define USBDEV_CS_TSIZE_MASK (0x3ff << USBDEV_CS_TSIZE_BIT) -# define USBDEV_CS_STALL (1 << 0) -#define USBD_EP0RDSTAT 0xB0200040 -#define USBD_EP0WRSTAT 0xB0200044 -#define USBD_EP2WRSTAT 0xB0200048 -#define USBD_EP3WRSTAT 0xB020004C -#define USBD_EP4RDSTAT 0xB0200050 -#define USBD_EP5RDSTAT 0xB0200054 -# define USBDEV_FSTAT_FLUSH (1 << 6) -# define USBDEV_FSTAT_UF (1 << 5) -# define USBDEV_FSTAT_OF (1 << 4) -# define USBDEV_FSTAT_FCNT_BIT 0 -# define USBDEV_FSTAT_FCNT_MASK (0x0f << USBDEV_FSTAT_FCNT_BIT) -#define USBD_ENABLE 0xB0200058 -# define USBDEV_ENABLE (1 << 1) -# define USBDEV_CE (1 << 0) - -#endif /* !CONFIG_SOC_AU1200 */ /* Ethernet Controllers */ diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 624a362f2fee..436cd71c6bec 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -35,3 +35,4 @@ obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o +obj-$(CONFIG_MIPS_ALCHEMY) += alchemy-common.o diff --git a/drivers/usb/host/alchemy-common.c b/drivers/usb/host/alchemy-common.c new file mode 100644 index 000000000000..b4192c964d0d --- /dev/null +++ b/drivers/usb/host/alchemy-common.c @@ -0,0 +1,337 @@ +/* + * USB block power/access management abstraction. + * + * Au1000+: The OHCI block control register is at the far end of the OHCI memory + * area. Au1550 has OHCI on different base address. No need to handle + * UDC here. + * Au1200: one register to control access and clocks to O/EHCI, UDC and OTG + * as well as the PHY for EHCI and UDC. + * + */ + +#include +#include +#include +#include +#include +#include + +/* control register offsets */ +#define AU1000_OHCICFG 0x7fffc +#define AU1550_OHCICFG 0x07ffc +#define AU1200_USBCFG 0x04 + +/* Au1000 USB block config bits */ +#define USBHEN_RD (1 << 4) /* OHCI reset-done indicator */ +#define USBHEN_CE (1 << 3) /* OHCI block clock enable */ +#define USBHEN_E (1 << 2) /* OHCI block enable */ +#define USBHEN_C (1 << 1) /* OHCI block coherency bit */ +#define USBHEN_BE (1 << 0) /* OHCI Big-Endian */ + +/* Au1200 USB config bits */ +#define USBCFG_PFEN (1 << 31) /* prefetch enable (undoc) */ +#define USBCFG_RDCOMB (1 << 30) /* read combining (undoc) */ +#define USBCFG_UNKNOWN (5 << 20) /* unknown, leave this way */ +#define USBCFG_SSD (1 << 23) /* serial short detect en */ +#define USBCFG_PPE (1 << 19) /* HS PHY PLL */ +#define USBCFG_UCE (1 << 18) /* UDC clock enable */ +#define USBCFG_ECE (1 << 17) /* EHCI clock enable */ +#define USBCFG_OCE (1 << 16) /* OHCI clock enable */ +#define USBCFG_FLA(x) (((x) & 0x3f) << 8) +#define USBCFG_UCAM (1 << 7) /* coherent access (undoc) */ +#define USBCFG_GME (1 << 6) /* OTG mem access */ +#define USBCFG_DBE (1 << 5) /* UDC busmaster enable */ +#define USBCFG_DME (1 << 4) /* UDC mem enable */ +#define USBCFG_EBE (1 << 3) /* EHCI busmaster enable */ +#define USBCFG_EME (1 << 2) /* EHCI mem enable */ +#define USBCFG_OBE (1 << 1) /* OHCI busmaster enable */ +#define USBCFG_OME (1 << 0) /* OHCI mem enable */ +#define USBCFG_INIT_AU1200 (USBCFG_PFEN | USBCFG_RDCOMB | USBCFG_UNKNOWN |\ + USBCFG_SSD | USBCFG_FLA(0x20) | USBCFG_UCAM | \ + USBCFG_GME | USBCFG_DBE | USBCFG_DME | \ + USBCFG_EBE | USBCFG_EME | USBCFG_OBE | \ + USBCFG_OME) + + +static DEFINE_SPINLOCK(alchemy_usb_lock); + + +static inline void __au1200_ohci_control(void __iomem *base, int enable) +{ + unsigned long r = __raw_readl(base + AU1200_USBCFG); + if (enable) { + __raw_writel(r | USBCFG_OCE, base + AU1200_USBCFG); + wmb(); + udelay(2000); + } else { + __raw_writel(r & ~USBCFG_OCE, base + AU1200_USBCFG); + wmb(); + udelay(1000); + } +} + +static inline void __au1200_ehci_control(void __iomem *base, int enable) +{ + unsigned long r = __raw_readl(base + AU1200_USBCFG); + if (enable) { + __raw_writel(r | USBCFG_ECE | USBCFG_PPE, base + AU1200_USBCFG); + wmb(); + udelay(1000); + } else { + if (!(r & USBCFG_UCE)) /* UDC also off? */ + r &= ~USBCFG_PPE; /* yes: disable HS PHY PLL */ + __raw_writel(r & ~USBCFG_ECE, base + AU1200_USBCFG); + wmb(); + udelay(1000); + } +} + +static inline void __au1200_udc_control(void __iomem *base, int enable) +{ + unsigned long r = __raw_readl(base + AU1200_USBCFG); + if (enable) { + __raw_writel(r | USBCFG_UCE | USBCFG_PPE, base + AU1200_USBCFG); + wmb(); + } else { + if (!(r & USBCFG_ECE)) /* EHCI also off? */ + r &= ~USBCFG_PPE; /* yes: disable HS PHY PLL */ + __raw_writel(r & ~USBCFG_UCE, base + AU1200_USBCFG); + wmb(); + } +} + +static inline int au1200_coherency_bug(void) +{ +#if defined(CONFIG_DMA_COHERENT) + /* Au1200 AB USB does not support coherent memory */ + if (!(read_c0_prid() & 0xff)) { + printk(KERN_INFO "Au1200 USB: this is chip revision AB !!\n"); + printk(KERN_INFO "Au1200 USB: update your board or re-configure" + " the kernel\n"); + return -ENODEV; + } +#endif + return 0; +} + +static inline int au1200_usb_control(int block, int enable) +{ + void __iomem *base = + (void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR); + int ret = 0; + + switch (block) { + case ALCHEMY_USB_OHCI0: + ret = au1200_coherency_bug(); + if (ret && enable) + goto out; + __au1200_ohci_control(base, enable); + break; + case ALCHEMY_USB_UDC0: + __au1200_udc_control(base, enable); + break; + case ALCHEMY_USB_EHCI0: + ret = au1200_coherency_bug(); + if (ret && enable) + goto out; + __au1200_ehci_control(base, enable); + break; + default: + ret = -ENODEV; + } +out: + return ret; +} + + +/* initialize USB block(s) to a known working state */ +static inline void au1200_usb_init(void) +{ + void __iomem *base = + (void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR); + __raw_writel(USBCFG_INIT_AU1200, base + AU1200_USBCFG); + wmb(); + udelay(1000); +} + +static inline void au1000_usb_init(unsigned long rb, int reg) +{ + void __iomem *base = (void __iomem *)KSEG1ADDR(rb + reg); + unsigned long r = __raw_readl(base); + +#if defined(__BIG_ENDIAN) + r |= USBHEN_BE; +#endif + r |= USBHEN_C; + + __raw_writel(r, base); + wmb(); + udelay(1000); +} + + +static inline void __au1xx0_ohci_control(int enable, unsigned long rb, int creg) +{ + void __iomem *base = (void __iomem *)KSEG1ADDR(rb); + unsigned long r = __raw_readl(base + creg); + + if (enable) { + __raw_writel(r | USBHEN_CE, base + creg); + wmb(); + udelay(1000); + __raw_writel(r | USBHEN_CE | USBHEN_E, base + creg); + wmb(); + udelay(1000); + + /* wait for reset complete (read reg twice: au1500 erratum) */ + while (__raw_readl(base + creg), + !(__raw_readl(base + creg) & USBHEN_RD)) + udelay(1000); + } else { + __raw_writel(r & ~(USBHEN_CE | USBHEN_E), base + creg); + wmb(); + } +} + +static inline int au1000_usb_control(int block, int enable, unsigned long rb, + int creg) +{ + int ret = 0; + + switch (block) { + case ALCHEMY_USB_OHCI0: + __au1xx0_ohci_control(enable, rb, creg); + break; + default: + ret = -ENODEV; + } + return ret; +} + +/* + * alchemy_usb_control - control Alchemy on-chip USB blocks + * @block: USB block to target + * @enable: set 1 to enable a block, 0 to disable + */ +int alchemy_usb_control(int block, int enable) +{ + unsigned long flags; + int ret; + + spin_lock_irqsave(&alchemy_usb_lock, flags); + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1000: + case ALCHEMY_CPU_AU1500: + case ALCHEMY_CPU_AU1100: + ret = au1000_usb_control(block, enable, + AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG); + break; + case ALCHEMY_CPU_AU1550: + ret = au1000_usb_control(block, enable, + AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG); + break; + case ALCHEMY_CPU_AU1200: + ret = au1200_usb_control(block, enable); + break; + default: + ret = -ENODEV; + } + spin_unlock_irqrestore(&alchemy_usb_lock, flags); + return ret; +} +EXPORT_SYMBOL_GPL(alchemy_usb_control); + + +static unsigned long alchemy_usb_pmdata[2]; + +static void au1000_usb_pm(unsigned long br, int creg, int susp) +{ + void __iomem *base = (void __iomem *)KSEG1ADDR(br); + + if (susp) { + alchemy_usb_pmdata[0] = __raw_readl(base + creg); + /* There appears to be some undocumented reset register.... */ + __raw_writel(0, base + 0x04); + wmb(); + __raw_writel(0, base + creg); + wmb(); + } else { + __raw_writel(alchemy_usb_pmdata[0], base + creg); + wmb(); + } +} + +static void au1200_usb_pm(int susp) +{ + void __iomem *base = + (void __iomem *)KSEG1ADDR(AU1200_USB_OTG_PHYS_ADDR); + if (susp) { + /* save OTG_CAP/MUX registers which indicate port routing */ + /* FIXME: write an OTG driver to do that */ + alchemy_usb_pmdata[0] = __raw_readl(base + 0x00); + alchemy_usb_pmdata[1] = __raw_readl(base + 0x04); + } else { + /* restore access to all MMIO areas */ + au1200_usb_init(); + + /* restore OTG_CAP/MUX registers */ + __raw_writel(alchemy_usb_pmdata[0], base + 0x00); + __raw_writel(alchemy_usb_pmdata[1], base + 0x04); + wmb(); + } +} + +static void alchemy_usb_pm(int susp) +{ + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1000: + case ALCHEMY_CPU_AU1500: + case ALCHEMY_CPU_AU1100: + au1000_usb_pm(AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG, susp); + break; + case ALCHEMY_CPU_AU1550: + au1000_usb_pm(AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG, susp); + break; + case ALCHEMY_CPU_AU1200: + au1200_usb_pm(susp); + break; + } +} + +static int alchemy_usb_suspend(void) +{ + alchemy_usb_pm(1); + return 0; +} + +static void alchemy_usb_resume(void) +{ + alchemy_usb_pm(0); +} + +static struct syscore_ops alchemy_usb_pm_ops = { + .suspend = alchemy_usb_suspend, + .resume = alchemy_usb_resume, +}; + +static int __init alchemy_usb_init(void) +{ + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1000: + case ALCHEMY_CPU_AU1500: + case ALCHEMY_CPU_AU1100: + au1000_usb_init(AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG); + break; + case ALCHEMY_CPU_AU1550: + au1000_usb_init(AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG); + break; + case ALCHEMY_CPU_AU1200: + au1200_usb_init(); + break; + } + + register_syscore_ops(&alchemy_usb_pm_ops); + + return 0; +} +arch_initcall(alchemy_usb_init); diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c index 42ae57409908..e480dc17394d 100644 --- a/drivers/usb/host/ehci-au1xxx.c +++ b/drivers/usb/host/ehci-au1xxx.c @@ -14,61 +14,9 @@ #include #include -#define USB_HOST_CONFIG (USB_MSR_BASE + USB_MSR_MCFG) -#define USB_MCFG_PFEN (1<<31) -#define USB_MCFG_RDCOMB (1<<30) -#define USB_MCFG_SSDEN (1<<23) -#define USB_MCFG_PHYPLLEN (1<<19) -#define USB_MCFG_UCECLKEN (1<<18) -#define USB_MCFG_EHCCLKEN (1<<17) -#ifdef CONFIG_DMA_COHERENT -#define USB_MCFG_UCAM (1<<7) -#else -#define USB_MCFG_UCAM (0) -#endif -#define USB_MCFG_EBMEN (1<<3) -#define USB_MCFG_EMEMEN (1<<2) - -#define USBH_ENABLE_CE (USB_MCFG_PHYPLLEN | USB_MCFG_EHCCLKEN) -#define USBH_ENABLE_INIT (USB_MCFG_PFEN | USB_MCFG_RDCOMB | \ - USBH_ENABLE_CE | USB_MCFG_SSDEN | \ - USB_MCFG_UCAM | USB_MCFG_EBMEN | \ - USB_MCFG_EMEMEN) - -#define USBH_DISABLE (USB_MCFG_EBMEN | USB_MCFG_EMEMEN) extern int usb_disabled(void); -static void au1xxx_start_ehc(void) -{ - /* enable clock to EHCI block and HS PHY PLL*/ - au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_CE, USB_HOST_CONFIG); - au_sync(); - udelay(1000); - - /* enable EHCI mmio */ - au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_INIT, USB_HOST_CONFIG); - au_sync(); - udelay(1000); -} - -static void au1xxx_stop_ehc(void) -{ - unsigned long c; - - /* Disable mem */ - au_writel(au_readl(USB_HOST_CONFIG) & ~USBH_DISABLE, USB_HOST_CONFIG); - au_sync(); - udelay(1000); - - /* Disable EHC clock. If the HS PHY is unused disable it too. */ - c = au_readl(USB_HOST_CONFIG) & ~USB_MCFG_EHCCLKEN; - if (!(c & USB_MCFG_UCECLKEN)) /* UDC disabled? */ - c &= ~USB_MCFG_PHYPLLEN; /* yes: disable HS PHY PLL */ - au_writel(c, USB_HOST_CONFIG); - au_sync(); -} - static int au1xxx_ehci_setup(struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); @@ -136,16 +84,6 @@ static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev) if (usb_disabled()) return -ENODEV; -#if defined(CONFIG_SOC_AU1200) && defined(CONFIG_DMA_COHERENT) - /* Au1200 AB USB does not support coherent memory */ - if (!(read_c0_prid() & 0xff)) { - printk(KERN_INFO "%s: this is chip revision AB!\n", pdev->name); - printk(KERN_INFO "%s: update your board or re-configure" - " the kernel\n", pdev->name); - return -ENODEV; - } -#endif - if (pdev->resource[1].flags != IORESOURCE_IRQ) { pr_debug("resource[1] is not IORESOURCE_IRQ"); return -ENOMEM; @@ -171,7 +109,11 @@ static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev) goto err2; } - au1xxx_start_ehc(); + if (alchemy_usb_control(ALCHEMY_USB_EHCI0, 1)) { + printk(KERN_INFO "%s: controller init failed!\n", pdev->name); + ret = -ENODEV; + goto err3; + } ehci = hcd_to_ehci(hcd); ehci->caps = hcd->regs; @@ -187,7 +129,8 @@ static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev) return ret; } - au1xxx_stop_ehc(); + alchemy_usb_control(ALCHEMY_USB_EHCI0, 0); +err3: iounmap(hcd->regs); err2: release_mem_region(hcd->rsrc_start, hcd->rsrc_len); @@ -201,10 +144,10 @@ static int ehci_hcd_au1xxx_drv_remove(struct platform_device *pdev) struct usb_hcd *hcd = platform_get_drvdata(pdev); usb_remove_hcd(hcd); + alchemy_usb_control(ALCHEMY_USB_EHCI0, 0); iounmap(hcd->regs); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); - au1xxx_stop_ehc(); platform_set_drvdata(pdev, NULL); return 0; @@ -236,7 +179,7 @@ static int ehci_hcd_au1xxx_drv_suspend(struct device *dev) // could save FLADJ in case of Vaux power loss // ... we'd only use it to handle clock skew - au1xxx_stop_ehc(); + alchemy_usb_control(ALCHEMY_USB_EHCI0, 0); return rc; } @@ -246,7 +189,7 @@ static int ehci_hcd_au1xxx_drv_resume(struct device *dev) struct usb_hcd *hcd = dev_get_drvdata(dev); struct ehci_hcd *ehci = hcd_to_ehci(hcd); - au1xxx_start_ehc(); + alchemy_usb_control(ALCHEMY_USB_EHCI0, 1); // maybe restore FLADJ diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c index 958d985f2951..299d719495f1 100644 --- a/drivers/usb/host/ohci-au1xxx.c +++ b/drivers/usb/host/ohci-au1xxx.c @@ -23,92 +23,9 @@ #include -#ifndef CONFIG_SOC_AU1200 - -#define USBH_ENABLE_BE (1<<0) -#define USBH_ENABLE_C (1<<1) -#define USBH_ENABLE_E (1<<2) -#define USBH_ENABLE_CE (1<<3) -#define USBH_ENABLE_RD (1<<4) - -#ifdef __LITTLE_ENDIAN -#define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C) -#elif defined(__BIG_ENDIAN) -#define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C | \ - USBH_ENABLE_BE) -#else -#error not byte order defined -#endif - -#else /* Au1200 */ - -#define USB_HOST_CONFIG (USB_MSR_BASE + USB_MSR_MCFG) -#define USB_MCFG_PFEN (1<<31) -#define USB_MCFG_RDCOMB (1<<30) -#define USB_MCFG_SSDEN (1<<23) -#define USB_MCFG_OHCCLKEN (1<<16) -#ifdef CONFIG_DMA_COHERENT -#define USB_MCFG_UCAM (1<<7) -#else -#define USB_MCFG_UCAM (0) -#endif -#define USB_MCFG_OBMEN (1<<1) -#define USB_MCFG_OMEMEN (1<<0) - -#define USBH_ENABLE_CE USB_MCFG_OHCCLKEN - -#define USBH_ENABLE_INIT (USB_MCFG_PFEN | USB_MCFG_RDCOMB | \ - USBH_ENABLE_CE | USB_MCFG_SSDEN | \ - USB_MCFG_UCAM | \ - USB_MCFG_OBMEN | USB_MCFG_OMEMEN) - -#define USBH_DISABLE (USB_MCFG_OBMEN | USB_MCFG_OMEMEN) - -#endif /* Au1200 */ extern int usb_disabled(void); -static void au1xxx_start_ohc(void) -{ - /* enable host controller */ -#ifndef CONFIG_SOC_AU1200 - au_writel(USBH_ENABLE_CE, USB_HOST_CONFIG); - au_sync(); - udelay(1000); - - au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_INIT, USB_HOST_CONFIG); - au_sync(); - udelay(1000); - - /* wait for reset complete (read register twice; see au1500 errata) */ - while (au_readl(USB_HOST_CONFIG), - !(au_readl(USB_HOST_CONFIG) & USBH_ENABLE_RD)) - udelay(1000); - -#else /* Au1200 */ - au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_CE, USB_HOST_CONFIG); - au_sync(); - udelay(1000); - - au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_INIT, USB_HOST_CONFIG); - au_sync(); - udelay(2000); -#endif /* Au1200 */ -} - -static void au1xxx_stop_ohc(void) -{ -#ifdef CONFIG_SOC_AU1200 - /* Disable mem */ - au_writel(au_readl(USB_HOST_CONFIG) & ~USBH_DISABLE, USB_HOST_CONFIG); - au_sync(); - udelay(1000); -#endif - /* Disable clock */ - au_writel(au_readl(USB_HOST_CONFIG) & ~USBH_ENABLE_CE, USB_HOST_CONFIG); - au_sync(); -} - static int __devinit ohci_au1xxx_start(struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci(hcd); @@ -178,17 +95,6 @@ static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev) if (usb_disabled()) return -ENODEV; -#if defined(CONFIG_SOC_AU1200) && defined(CONFIG_DMA_COHERENT) - /* Au1200 AB USB does not support coherent memory */ - if (!(read_c0_prid() & 0xff)) { - printk(KERN_INFO "%s: this is chip revision AB !!\n", - pdev->name); - printk(KERN_INFO "%s: update your board or re-configure " - "the kernel\n", pdev->name); - return -ENODEV; - } -#endif - if (pdev->resource[1].flags != IORESOURCE_IRQ) { pr_debug("resource[1] is not IORESOURCE_IRQ\n"); return -ENOMEM; @@ -214,7 +120,12 @@ static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev) goto err2; } - au1xxx_start_ohc(); + if (alchemy_usb_control(ALCHEMY_USB_OHCI0, 1)) { + printk(KERN_INFO "%s: controller init failed!\n", pdev->name); + ret = -ENODEV; + goto err3; + } + ohci_hcd_init(hcd_to_ohci(hcd)); ret = usb_add_hcd(hcd, pdev->resource[1].start, @@ -224,7 +135,8 @@ static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev) return ret; } - au1xxx_stop_ohc(); + alchemy_usb_control(ALCHEMY_USB_OHCI0, 0); +err3: iounmap(hcd->regs); err2: release_mem_region(hcd->rsrc_start, hcd->rsrc_len); @@ -238,7 +150,7 @@ static int ohci_hcd_au1xxx_drv_remove(struct platform_device *pdev) struct usb_hcd *hcd = platform_get_drvdata(pdev); usb_remove_hcd(hcd); - au1xxx_stop_ohc(); + alchemy_usb_control(ALCHEMY_USB_OHCI0, 0); iounmap(hcd->regs); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); @@ -275,7 +187,7 @@ static int ohci_hcd_au1xxx_drv_suspend(struct device *dev) clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - au1xxx_stop_ohc(); + alchemy_usb_control(ALCHEMY_USB_OHCI0, 0); bail: spin_unlock_irqrestore(&ohci->lock, flags); @@ -286,7 +198,7 @@ static int ohci_hcd_au1xxx_drv_resume(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); - au1xxx_start_ohc(); + alchemy_usb_control(ALCHEMY_USB_OHCI0, 1); set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); ohci_finish_controller_resume(hcd); -- GitLab