Skip to content

K
Kernel

openeuler / Kernel
大约 1 年 前同步成功

通知 5
Star 0
Fork 0
K
Kernel

体验新版 GitCode，发现更多精彩内容 >>

提交 ccd5c8ef 编写于 作者: F françois romieu 提交者： David S. Miller
浏览文件
操作

atl1e: remove private #define. 

Either unused or duplicates from mii.h.
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>
Cc: Jay Cliburn <jcliburn@gmail.com>
Cc: Chris Snook <chris.snook@gmail.com>
Cc: Jie Yang <jie.yang@atheros.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 34aac66c
显示空白变更内容
内联 并排
Showing with 25 addition and 136 deletion
drivers/net/atl1e/atl1e_ethtool.c
浏览文件 @ ccd5c8ef
......@@ -95,18 +95,18 @@ static int atl1e_set_settings(struct net_device *netdev,
ecmd->advertising = hw->autoneg_advertised |
ADVERTISED_TP | ADVERTISED_Autoneg;
adv4 = hw->mii_autoneg_adv_reg & ~MII_AR_SPEED_MASK;
adv4 = hw->mii_autoneg_adv_reg & ~ADVERTISE_ALL;
adv9 = hw->mii_1000t_ctrl_reg & ~MII_AT001_CR_1000T_SPEED_MASK;
if (hw->autoneg_advertised & ADVERTISE_10_HALF)
adv4 |= MII_AR_10T_HD_CAPS;
adv4 |= ADVERTISE_10HALF;
if (hw->autoneg_advertised & ADVERTISE_10_FULL)
adv4 |= MII_AR_10T_FD_CAPS;
adv4 |= ADVERTISE_10FULL;
if (hw->autoneg_advertised & ADVERTISE_100_HALF)
adv4 |= MII_AR_100TX_HD_CAPS;
adv4 |= ADVERTISE_100HALF;
if (hw->autoneg_advertised & ADVERTISE_100_FULL)
adv4 |= MII_AR_100TX_FD_CAPS;
adv4 |= ADVERTISE_100FULL;
if (hw->autoneg_advertised & ADVERTISE_1000_FULL)
adv9 |= MII_AT001_CR_1000T_FD_CAPS;
adv9 |= ADVERTISE_1000FULL;
if (adv4 != hw->mii_autoneg_adv_reg ||
adv9 != hw->mii_1000t_ctrl_reg) {
......
drivers/net/atl1e/atl1e_hw.c
浏览文件 @ ccd5c8ef
......@@ -318,7 +318,7 @@ static int atl1e_phy_setup_autoneg_adv(struct atl1e_hw *hw)
* Advertisement Register (Address 4) and the 1000 mb speed bits in
* the 1000Base-T control Register (Address 9).
*/
mii_autoneg_adv_reg &= ~MII_AR_SPEED_MASK;
mii_autoneg_adv_reg &= ~ADVERTISE_ALL;
mii_1000t_ctrl_reg &= ~MII_AT001_CR_1000T_SPEED_MASK;
/*
......@@ -327,44 +327,37 @@ static int atl1e_phy_setup_autoneg_adv(struct atl1e_hw *hw)
*/
switch (hw->media_type) {
case MEDIA_TYPE_AUTO_SENSOR:
mii_autoneg_adv_reg |= (MII_AR_10T_HD_CAPS |
MII_AR_10T_FD_CAPS |
MII_AR_100TX_HD_CAPS |
MII_AR_100TX_FD_CAPS);
hw->autoneg_advertised = ADVERTISE_10_HALF |
ADVERTISE_10_FULL |
ADVERTISE_100_HALF |
ADVERTISE_100_FULL;
mii_autoneg_adv_reg |= ADVERTISE_ALL;
hw->autoneg_advertised = ADVERTISE_ALL;
if (hw->nic_type == athr_l1e) {
mii_1000t_ctrl_reg |=
MII_AT001_CR_1000T_FD_CAPS;
mii_1000t_ctrl_reg |= ADVERTISE_1000FULL;
hw->autoneg_advertised |= ADVERTISE_1000_FULL;
}
break;
case MEDIA_TYPE_100M_FULL:
mii_autoneg_adv_reg |= MII_AR_100TX_FD_CAPS;
mii_autoneg_adv_reg |= ADVERTISE_100FULL;
hw->autoneg_advertised = ADVERTISE_100_FULL;
break;
case MEDIA_TYPE_100M_HALF:
mii_autoneg_adv_reg |= MII_AR_100TX_HD_CAPS;
mii_autoneg_adv_reg |= ADVERTISE_100_HALF;
hw->autoneg_advertised = ADVERTISE_100_HALF;
break;
case MEDIA_TYPE_10M_FULL:
mii_autoneg_adv_reg |= MII_AR_10T_FD_CAPS;
mii_autoneg_adv_reg |= ADVERTISE_10_FULL;
hw->autoneg_advertised = ADVERTISE_10_FULL;
break;
default:
mii_autoneg_adv_reg |= MII_AR_10T_HD_CAPS;
mii_autoneg_adv_reg |= ADVERTISE_10_HALF;
hw->autoneg_advertised = ADVERTISE_10_HALF;
break;
}
/* flow control fixed to enable all */
mii_autoneg_adv_reg |= (MII_AR_ASM_DIR | MII_AR_PAUSE);
mii_autoneg_adv_reg |= (ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP);
hw->mii_autoneg_adv_reg = mii_autoneg_adv_reg;
hw->mii_1000t_ctrl_reg = mii_1000t_ctrl_reg;
......@@ -374,7 +367,7 @@ static int atl1e_phy_setup_autoneg_adv(struct atl1e_hw *hw)
return ret_val;
if (hw->nic_type == athr_l1e || hw->nic_type == athr_l2e_revA) {
ret_val = atl1e_write_phy_reg(hw, MII_AT001_CR,
ret_val = atl1e_write_phy_reg(hw, MII_CTRL1000,
mii_1000t_ctrl_reg);
if (ret_val)
return ret_val;
......@@ -397,7 +390,7 @@ int atl1e_phy_commit(struct atl1e_hw *hw)
int ret_val;
u16 phy_data;
phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG;
phy_data = BMCR_RESET | BMCR_ANENABLE | BMCR_ANRESTART;
ret_val = atl1e_write_phy_reg(hw, MII_BMCR, phy_data);
if (ret_val) {
......@@ -645,15 +638,14 @@ int atl1e_restart_autoneg(struct atl1e_hw *hw)
return err;
if (hw->nic_type == athr_l1e || hw->nic_type == athr_l2e_revA) {
err = atl1e_write_phy_reg(hw, MII_AT001_CR,
err = atl1e_write_phy_reg(hw, MII_CTRL1000,
hw->mii_1000t_ctrl_reg);
if (err)
return err;
}
err = atl1e_write_phy_reg(hw, MII_BMCR,
MII_CR_RESET | MII_CR_AUTO_NEG_EN |
MII_CR_RESTART_AUTO_NEG);
BMCR_RESET | BMCR_ANENABLE | BMCR_ANRESTART);
return err;
}
drivers/net/atl1e/atl1e_hw.h
浏览文件 @ ccd5c8ef
......@@ -629,127 +629,24 @@ s32 atl1e_restart_autoneg(struct atl1e_hw *hw);
/***************************** MII definition ***************************************/
/* PHY Common Register */
#define MII_BMCR 0x00
#define MII_BMSR 0x01
#define MII_PHYSID1 0x02
#define MII_PHYSID2 0x03
#define MII_ADVERTISE 0x04
#define MII_LPA 0x05
#define MII_EXPANSION 0x06
#define MII_AT001_CR 0x09
#define MII_AT001_SR 0x0A
#define MII_AT001_ESR 0x0F
#define MII_AT001_PSCR 0x10
#define MII_AT001_PSSR 0x11
#define MII_INT_CTRL 0x12
#define MII_INT_STATUS 0x13
#define MII_SMARTSPEED 0x14
#define MII_RERRCOUNTER 0x15
#define MII_SREVISION 0x16
#define MII_RESV1 0x17
#define MII_LBRERROR 0x18
#define MII_PHYADDR 0x19
#define MII_RESV2 0x1a
#define MII_TPISTATUS 0x1b
#define MII_NCONFIG 0x1c
#define MII_DBG_ADDR 0x1D
#define MII_DBG_DATA 0x1E
/* PHY Control Register */
#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */
#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */
#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */
#define MII_CR_POWER_DOWN 0x0800 /* Power down */
#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */
#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
#define MII_CR_SPEED_MASK 0x2040
#define MII_CR_SPEED_1000 0x0040
#define MII_CR_SPEED_100 0x2000
#define MII_CR_SPEED_10 0x0000
/* PHY Status Register */
#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */
#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */
#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */
#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */
#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */
#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */
#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */
#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */
#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */
#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */
#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */
#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */
#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */
/* Link partner ability register. */
#define MII_LPA_SLCT 0x001f /* Same as advertise selector */
#define MII_LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */
#define MII_LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */
#define MII_LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */
#define MII_LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */
#define MII_LPA_100BASE4 0x0200 /* 100BASE-T4 */
#define MII_LPA_PAUSE 0x0400 /* PAUSE */
#define MII_LPA_ASYPAUSE 0x0800 /* Asymmetrical PAUSE */
#define MII_LPA_RFAULT 0x2000 /* Link partner faulted */
#define MII_LPA_LPACK 0x4000 /* Link partner acked us */
#define MII_LPA_NPAGE 0x8000 /* Next page bit */
/* Autoneg Advertisement Register */
#define MII_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */
#define MII_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */
#define MII_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */
#define MII_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */
#define MII_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */
#define MII_AR_100T4_CAPS 0x0200 /* 100T4 Capable */
#define MII_AR_PAUSE 0x0400 /* Pause operation desired */
#define MII_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */
#define MII_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */
#define MII_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */
#define MII_AR_SPEED_MASK 0x01E0
#define MII_AR_DEFAULT_CAP_MASK 0x0DE0
#define MII_AR_DEFAULT_CAP_MASK 0
/* 1000BASE-T Control Register */
#define MII_AT001_CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */
#define MII_AT001_CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */
#define MII_AT001_CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port */
/* 0=DTE device */
#define MII_AT001_CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */
/* 0=Configure PHY as Slave */
#define MII_AT001_CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */
/* 0=Automatic Master/Slave config */
#define MII_AT001_CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */
#define MII_AT001_CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */
#define MII_AT001_CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */
#define MII_AT001_CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */
#define MII_AT001_CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */
#define MII_AT001_CR_1000T_SPEED_MASK 0x0300
#define MII_AT001_CR_1000T_DEFAULT_CAP_MASK 0x0300
/* 1000BASE-T Status Register */
#define MII_AT001_SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */
#define MII_AT001_SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */
#define MII_AT001_SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
#define MII_AT001_SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */
#define MII_AT001_SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master, 0=Slave */
#define MII_AT001_SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */
#define MII_AT001_SR_1000T_REMOTE_RX_STATUS_SHIFT 12
#define MII_AT001_SR_1000T_LOCAL_RX_STATUS_SHIFT 13
/* Extended Status Register */
#define MII_AT001_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */
#define MII_AT001_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */
#define MII_AT001_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */
#define MII_AT001_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */
#define MII_AT001_CR_1000T_SPEED_MASK \
(ADVERTISE_1000FULL | ADVERTISE_1000HALF)
#define MII_AT001_CR_1000T_DEFAULT_CAP_MASK MII_AT001_CR_1000T_SPEED_MASK
/* AT001 PHY Specific Control Register */
#define MII_AT001_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */
......
drivers/net/atl1e/atl1e_main.c
浏览文件 @ ccd5c8ef
......@@ -2051,9 +2051,9 @@ static int atl1e_suspend(struct pci_dev *pdev, pm_message_t state)
atl1e_read_phy_reg(hw, MII_BMSR, (u16 *)&mii_bmsr_data);
atl1e_read_phy_reg(hw, MII_BMSR, (u16 *)&mii_bmsr_data);
mii_advertise_data = MII_AR_10T_HD_CAPS;
mii_advertise_data = ADVERTISE_10HALF;
if ((atl1e_write_phy_reg(hw, MII_AT001_CR, 0) != 0) ||
if ((atl1e_write_phy_reg(hw, MII_CTRL1000, 0) != 0) ||
(atl1e_write_phy_reg(hw,
MII_ADVERTISE, mii_advertise_data) != 0) ||
(atl1e_phy_commit(hw)) != 0) {
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或