diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c index 421feb8f92fee2ae13cba9424651f2442265a0ba..29b1c88b55cc494bae079da9b2283170508b4e9d 100644 --- a/drivers/net/phy/bcm7xxx.c +++ b/drivers/net/phy/bcm7xxx.c @@ -565,7 +565,7 @@ static int bcm7xxx_28nm_set_tunable(struct phy_device *phydev, if (ret) return ret; - /* Disable EEE advertisment since this prevents the PHY + /* Disable EEE advertisement since this prevents the PHY * from successfully linking up, trigger auto-negotiation restart * to let the MAC decide what to do. */ diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 22d9bc9c33a4bce864505babe6b3060348542a62..98fd6b7ceeec7555f19e5865d6636d74ac705ce6 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -860,7 +860,7 @@ static int m88e1510_config_init(struct phy_device *phydev) return err; /* There appears to be a bug in the 88e1512 when used in - * SGMII to copper mode, where the AN advertisment register + * SGMII to copper mode, where the AN advertisement register * clears the pause bits each time a negotiation occurs. * This means we can never be truely sure what was advertised, * so disable Pause support. diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c index 4f1efa02a9300545468d7e553f02f289eab1733c..9564916d2d7b79435176616f4d25cc20d5362d6a 100644 --- a/drivers/net/phy/marvell10g.c +++ b/drivers/net/phy/marvell10g.c @@ -308,7 +308,7 @@ static int mv3310_read_status(struct phy_device *phydev) if (val < 0) return val; - /* Read the link partner's 1G advertisment */ + /* Read the link partner's 1G advertisement */ val = phy_read_mmd(phydev, MDIO_MMD_AN, MV_AN_STAT1000); if (val < 0) return val; diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c index 0017eddc24db7f6a4e581640d08d2dd3edf9c477..e1225545362d513351451f388d3120f783441594 100644 --- a/drivers/net/phy/phy-c45.c +++ b/drivers/net/phy/phy-c45.c @@ -163,11 +163,11 @@ int genphy_c45_read_link(struct phy_device *phydev, u32 mmd_mask) EXPORT_SYMBOL_GPL(genphy_c45_read_link); /** - * genphy_c45_read_lpa - read the link partner advertisment and pause + * genphy_c45_read_lpa - read the link partner advertisement and pause * @phydev: target phy_device struct * * Read the Clause 45 defined base (7.19) and 10G (7.33) status registers, - * filling in the link partner advertisment, pause and asym_pause members + * filling in the link partner advertisement, pause and asym_pause members * in @phydev. This assumes that the auto-negotiation MMD is present, and * the backplane bit (7.48.0) is clear. Clause 45 PHY drivers are expected * to fill in the remainder of the link partner advert from vendor registers. @@ -176,7 +176,7 @@ int genphy_c45_read_lpa(struct phy_device *phydev) { int val; - /* Read the link partner's base page advertisment */ + /* Read the link partner's base page advertisement */ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPA); if (val < 0) return val; @@ -185,7 +185,7 @@ int genphy_c45_read_lpa(struct phy_device *phydev) phydev->pause = val & LPA_PAUSE_CAP ? 1 : 0; phydev->asym_pause = val & LPA_PAUSE_ASYM ? 1 : 0; - /* Read the link partner's 10G advertisment */ + /* Read the link partner's 10G advertisement */ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_STAT); if (val < 0) return val; diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c index 4083f00c97a5bb5f5c2c1c62afe698bcdf12d13e..c7da4cbb11032d7883371cc50b93f956b7e7f0d2 100644 --- a/drivers/net/phy/phy-core.c +++ b/drivers/net/phy/phy-core.c @@ -190,10 +190,10 @@ size_t phy_speeds(unsigned int *speeds, size_t size, } /** - * phy_resolve_aneg_linkmode - resolve the advertisments into phy settings + * phy_resolve_aneg_linkmode - resolve the advertisements into phy settings * @phydev: The phy_device struct * - * Resolve our and the link partner advertisments into their corresponding + * Resolve our and the link partner advertisements into their corresponding * speed and duplex. If full duplex was negotiated, extract the pause mode * from the link partner mask. */ diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index 7d1724072325336a789e9ff32154b3858d1f7ffd..51a011a349fee8dfbc9dc35784c67dee6c0e4b81 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -364,7 +364,7 @@ static void phylink_get_fixed_state(struct phylink *pl, struct phylink_link_stat } /* Flow control is resolved according to our and the link partners - * advertisments using the following drawn from the 802.3 specs: + * advertisements using the following drawn from the 802.3 specs: * Local device Link partner * Pause AsymDir Pause AsymDir Result * 1 X 1 X TX+RX @@ -683,7 +683,7 @@ static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy) linkmode_copy(pl->supported, supported); linkmode_copy(pl->link_config.advertising, config.advertising); - /* Restrict the phy advertisment according to the MAC support. */ + /* Restrict the phy advertisement according to the MAC support. */ ethtool_convert_link_mode_to_legacy_u32(&advertising, config.advertising); phy->advertising = advertising; mutex_unlock(&pl->state_mutex); @@ -887,7 +887,7 @@ void phylink_start(struct phylink *pl) /* Apply the link configuration to the MAC when starting. This allows * a fixed-link to start with the correct parameters, and also - * ensures that we set the appropriate advertisment for Serdes links. + * ensures that we set the appropriate advertisement for Serdes links. */ phylink_resolve_flow(pl, &pl->link_config); phylink_mac_config(pl, &pl->link_config); @@ -1074,7 +1074,7 @@ int phylink_ethtool_ksettings_set(struct phylink *pl, config = pl->link_config; - /* Mask out unsupported advertisments */ + /* Mask out unsupported advertisements */ linkmode_and(config.advertising, kset->link_modes.advertising, pl->supported); @@ -1119,7 +1119,7 @@ int phylink_ethtool_ksettings_set(struct phylink *pl, if (phylink_validate(pl, pl->supported, &config)) return -EINVAL; - /* If autonegotiation is enabled, we must have an advertisment */ + /* If autonegotiation is enabled, we must have an advertisement */ if (config.an_enabled && phylink_is_empty_linkmode(config.advertising)) return -EINVAL; @@ -1606,7 +1606,7 @@ static int phylink_sfp_module_insert(void *upstream, iface = sfp_select_interface(pl->sfp_bus, id, config.advertising); if (iface == PHY_INTERFACE_MODE_NA) { netdev_err(pl->netdev, - "selection of interface failed, advertisment %*pb\n", + "selection of interface failed, advertisement %*pb\n", __ETHTOOL_LINK_MODE_MASK_NBITS, config.advertising); return -EINVAL; }