[ARM] 4560/1: pxa: move processor specific set_wake logic out of irq.c

a function pxa_init_irq_set_wake() was introduced, so that
processor specific code could install their own version

code setting PFER and PRER registers within pxa_gpio_irq_type
are removed, and the edge configuration is postponed to the
(*set_wake) and copies the GRER and GFER register, which will
always be set up correctly by pxa_gpio_irq_type()
Signed-off-by: Neric miao <eric.y.miao@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-pxa/generic.h

@@ -15,6 +15,7 @@ extern struct sys_timer pxa_timer;
 extern void __init pxa_init_irq_low(void);
 extern void __init pxa_init_irq_high(void);
 extern void __init pxa_init_irq_gpio(int gpio_nr);
+extern void __init pxa_init_irq_set_wake(int (*set_wake)(unsigned int, unsigned int));
 extern void __init pxa25x_init_irq(void);
 extern void __init pxa27x_init_irq(void);
 extern void __init pxa_map_io(void);

arch/arm/mach-pxa/irq.c

@@ -38,33 +38,11 @@ static void pxa_unmask_low_irq(unsigned int irq)
 	ICMR |= (1 << irq);
 }
 
-static int pxa_set_wake(unsigned int irq, unsigned int on)
-{
-	u32	mask;
-
-	switch (irq) {
-	case IRQ_RTCAlrm:
-		mask = PWER_RTC;
-		break;
-#ifdef CONFIG_PXA27x
-	/* REVISIT can handle USBH1, USBH2, USB, MSL, USIM, ... */
-#endif
-	default:
-		return -EINVAL;
-	}
-	if (on)
-		PWER |= mask;
-	else
-		PWER &= ~mask;
-	return 0;
-}
-
 static struct irq_chip pxa_internal_chip_low = {
 	.name		= "SC",
 	.ack		= pxa_mask_low_irq,
 	.mask		= pxa_mask_low_irq,
 	.unmask		= pxa_unmask_low_irq,
-	.set_wake	= pxa_set_wake,
 };
 
 void __init pxa_init_irq_low(void)
@@ -125,26 +103,6 @@ void __init pxa_init_irq_high(void)
 }
 #endif
 
-/* Note that if an input/irq line ever gets changed to an output during
- * suspend, the relevant PWER, PRER, and PFER bits should be cleared.
- */
-#ifdef CONFIG_PXA27x
-
-/* PXA27x:  Various gpios can issue wakeup events.  This logic only
- * handles the simple cases, not the WEMUX2 and WEMUX3 options
- */
-#define PXA27x_GPIO_NOWAKE_MASK \
-	((1 << 8) | (1 << 7) | (1 << 6) | (1 << 5) | (1 << 2))
-#define	WAKEMASK(gpio) \
-	(((gpio) <= 15) \
-		? ((1 << (gpio)) & ~PXA27x_GPIO_NOWAKE_MASK) \
-		: ((gpio == 35) ? (1 << 24) : 0))
-#else
-
-/* pxa 210, 250, 255, 26x:  gpios 0..15 can issue wakeups */
-#define	WAKEMASK(gpio) (((gpio) <= 15) ? (1 << (gpio)) : 0)
-#endif
-
 /*
  * PXA GPIO edge detection for IRQs:
  * IRQs are generated on Falling-Edge, Rising-Edge, or both.
@@ -158,11 +116,9 @@ static long GPIO_IRQ_mask[4];
 static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
 {
 	int gpio, idx;
-	u32 mask;
 
 	gpio = IRQ_TO_GPIO(irq);
 	idx = gpio >> 5;
-	mask = WAKEMASK(gpio);
 
 	if (type == IRQT_PROBE) {
 	    /* Don't mess with enabled GPIOs using preconfigured edges or
@@ -182,19 +138,15 @@ static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
 	if (type & __IRQT_RISEDGE) {
 		/* printk("rising "); */
 		__set_bit (gpio, GPIO_IRQ_rising_edge);
-		PRER |= mask;
 	} else {
 		__clear_bit (gpio, GPIO_IRQ_rising_edge);
-		PRER &= ~mask;
 	}
 
 	if (type & __IRQT_FALEDGE) {
 		/* printk("falling "); */
 		__set_bit (gpio, GPIO_IRQ_falling_edge);
-		PFER |= mask;
 	} else {
 		__clear_bit (gpio, GPIO_IRQ_falling_edge);
-		PFER &= ~mask;
 	}
 
 	/* printk("edges\n"); */
@@ -213,29 +165,12 @@ static void pxa_ack_low_gpio(unsigned int irq)
 	GEDR0 = (1 << (irq - IRQ_GPIO0));
 }
 
-static int pxa_set_gpio_wake(unsigned int irq, unsigned int on)
-{
-	int	gpio = IRQ_TO_GPIO(irq);
-	u32	mask = WAKEMASK(gpio);
-
-	if (!mask)
-		return -EINVAL;
-
-	if (on)
-		PWER |= mask;
-	else
-		PWER &= ~mask;
-	return 0;
-}
-
-
 static struct irq_chip pxa_low_gpio_chip = {
 	.name		= "GPIO-l",
 	.ack		= pxa_ack_low_gpio,
 	.mask		= pxa_mask_low_irq,
 	.unmask		= pxa_unmask_low_irq,
 	.set_type	= pxa_gpio_irq_type,
-	.set_wake	= pxa_set_gpio_wake,
 };
 
 /*
@@ -342,7 +277,6 @@ static struct irq_chip pxa_muxed_gpio_chip = {
 	.mask		= pxa_mask_muxed_gpio,
 	.unmask		= pxa_unmask_muxed_gpio,
 	.set_type	= pxa_gpio_irq_type,
-	.set_wake	= pxa_set_gpio_wake,
 };
 
 void __init pxa_init_irq_gpio(int gpio_nr)
@@ -377,3 +311,13 @@ void __init pxa_init_irq_gpio(int gpio_nr)
 	set_irq_chip(IRQ_GPIO_2_x, &pxa_internal_chip_low);
 	set_irq_chained_handler(IRQ_GPIO_2_x, pxa_gpio_demux_handler);
 }
+
+void __init pxa_init_irq_set_wake(int (*set_wake)(unsigned int, unsigned int))
+{
+	pxa_internal_chip_low.set_wake = set_wake;
+#ifdef CONFIG_PXA27x
+	pxa_internal_chip_high.set_wake = set_wake;
+#endif
+	pxa_low_gpio_chip.set_wake = set_wake;
+	pxa_muxed_gpio_chip.set_wake = set_wake;
+}

arch/arm/mach-pxa/pxa25x.c

@@ -227,10 +227,52 @@ static void __init pxa25x_init_pm(void)
 }
 #endif
 
+/* PXA25x: supports wakeup from GPIO0..GPIO15 and RTC alarm
+ */
+
+static int pxa25x_set_wake(unsigned int irq, unsigned int on)
+{
+	int gpio = IRQ_TO_GPIO(irq);
+	uint32_t gpio_bit, mask = 0;
+
+	if (gpio >= 0 && gpio <= 15) {
+		gpio_bit = GPIO_bit(gpio);
+		mask = gpio_bit;
+		if (on) {
+			if (GRER(gpio) | gpio_bit)
+				PRER |= gpio_bit;
+			else
+				PRER &= ~gpio_bit;
+
+			if (GFER(gpio) | gpio_bit)
+				PFER |= gpio_bit;
+			else
+				PFER &= ~gpio_bit;
+		}
+		goto set_pwer;
+	}
+
+	if (irq == IRQ_RTCAlrm) {
+		mask = PWER_RTC;
+		goto set_pwer;
+	}
+
+	return -EINVAL;
+
+set_pwer:
+	if (on)
+		PWER |= mask;
+	else
+		PWER &=~mask;
+
+	return 0;
+}
+
 void __init pxa25x_init_irq(void)
 {
 	pxa_init_irq_low();
 	pxa_init_irq_gpio(85);
+	pxa_init_irq_set_wake(pxa25x_set_wake);
 }
 
 static struct platform_device *pxa25x_devices[] __initdata = {

arch/arm/mach-pxa/pxa27x.c

@@ -306,6 +306,69 @@ static void __init pxa27x_init_pm(void)
 }
 #endif
 
+/* PXA27x:  Various gpios can issue wakeup events.  This logic only
+ * handles the simple cases, not the WEMUX2 and WEMUX3 options
+ */
+#define PXA27x_GPIO_NOWAKE_MASK \
+        ((1 << 8) | (1 << 7) | (1 << 6) | (1 << 5) | (1 << 2))
+#define WAKEMASK(gpio) \
+        (((gpio) <= 15) \
+                 ? ((1 << (gpio)) & ~PXA27x_GPIO_NOWAKE_MASK) \
+                 : ((gpio == 35) ? (1 << 24) : 0))
+
+static int pxa27x_set_wake(unsigned int irq, unsigned int on)
+{
+	int gpio = IRQ_TO_GPIO(irq);
+	uint32_t mask;
+
+	if ((gpio >= 0 && gpio <= 15) || (gpio == 35)) {
+		if (WAKEMASK(gpio) == 0)
+			return -EINVAL;
+
+		mask = WAKEMASK(gpio);
+
+		if (on) {
+			if (GRER(gpio) | GPIO_bit(gpio))
+				PRER |= mask;
+			else
+				PRER &= ~mask;
+
+			if (GFER(gpio) | GPIO_bit(gpio))
+				PFER |= mask;
+			else
+				PFER &= ~mask;
+		}
+		goto set_pwer;
+	}
+
+	switch (irq) {
+	case IRQ_RTCAlrm:
+		mask = PWER_RTC;
+		break;
+	case IRQ_USB:
+		mask = 1u << 26;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+set_pwer:
+	if (on)
+		PWER |= mask;
+	else
+		PWER &=~mask;
+
+	return 0;
+}
+
+void __init pxa27x_init_irq(void)
+{
+	pxa_init_irq_low();
+	pxa_init_irq_high();
+	pxa_init_irq_gpio(128);
+	pxa_init_irq_set_wake(pxa27x_set_wake);
+}
+
 /*
  * device registration specific to PXA27x.
  */
@@ -375,13 +438,6 @@ static struct platform_device *devices[] __initdata = {
 	&pxa27x_device_ohci,
 };
 
-void __init pxa27x_init_irq(void)
-{
-	pxa_init_irq_low();
-	pxa_init_irq_high();
-	pxa_init_irq_gpio(128);
-}
-
 static int __init pxa27x_init(void)
 {
 	int ret = 0;