gpio: move mpc8xxx/512x gpio driver to drivers/gpio

Move the driver to the place where it is expected to be nowadays. Also
rename its CONFIG-name to match the rest and adapt the defconfigs.
Finally, move selection of REQUIRE_GPIOLIB or WANTS_OPTIONAL_GPIOLIB to
the platforms, because this option is per-platform and not per-driver.
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

arch/powerpc/configs/85xx/p1023rds_defconfig

@@ -24,7 +24,7 @@ CONFIG_P1023_RDS=y
 CONFIG_QUICC_ENGINE=y
 CONFIG_QE_GPIO=y
 CONFIG_CPM2=y
-CONFIG_MPC8xxx_GPIO=y
+CONFIG_GPIO_MPC8XXX=y
 CONFIG_HIGHMEM=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y

arch/powerpc/configs/85xx/xes_mpc85xx_defconfig

@@ -20,7 +20,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_XES_MPC85xx=y
-CONFIG_MPC8xxx_GPIO=y
+CONFIG_GPIO_MPC8XXX=y
 CONFIG_HIGHMEM=y
 CONFIG_MATH_EMULATION=y
 CONFIG_SPARSE_IRQ=y

arch/powerpc/configs/mpc85xx_defconfig

@@ -41,7 +41,7 @@ CONFIG_TQM8560=y
 CONFIG_SBC8548=y
 CONFIG_QUICC_ENGINE=y
 CONFIG_QE_GPIO=y
-CONFIG_MPC8xxx_GPIO=y
+CONFIG_GPIO_MPC8XXX=y
 CONFIG_HIGHMEM=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y

arch/powerpc/configs/mpc85xx_smp_defconfig

@@ -42,7 +42,7 @@ CONFIG_TQM8560=y
 CONFIG_SBC8548=y
 CONFIG_QUICC_ENGINE=y
 CONFIG_QE_GPIO=y
-CONFIG_MPC8xxx_GPIO=y
+CONFIG_GPIO_MPC8XXX=y
 CONFIG_HIGHMEM=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y

arch/powerpc/configs/ppc6xx_defconfig

@@ -70,7 +70,7 @@ CONFIG_TAU_AVERAGE=y
 CONFIG_QUICC_ENGINE=y
 CONFIG_QE_GPIO=y
 CONFIG_PPC_BESTCOMM=y
-CONFIG_MPC8xxx_GPIO=y
+CONFIG_GPIO_MPC8XXX=y
 CONFIG_MCU_MPC8349EMITX=m
 CONFIG_HIGHMEM=y
 CONFIG_NO_HZ=y

arch/powerpc/platforms/512x/Kconfig

@@ -6,6 +6,7 @@ config PPC_MPC512x
 	select PPC_CLOCK
 	select PPC_PCI_CHOICE
 	select FSL_PCI if PCI
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 
 config MPC5121_ADS
 	bool "Freescale MPC5121E ADS"

arch/powerpc/platforms/83xx/Kconfig

@@ -114,18 +114,21 @@ config KMETER1
 
 endif
 
-# used for usb
+# used for usb & gpio
 config PPC_MPC831x
 	bool
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 
 # used for math-emu
 config PPC_MPC832x
 	bool
 
-# used for usb
+# used for usb & gpio
 config PPC_MPC834x
 	bool
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 
-# used for usb
+# used for usb & gpio
 config PPC_MPC837x
 	bool
+	select ARCH_WANT_OPTIONAL_GPIOLIB

arch/powerpc/platforms/85xx/Kconfig

@@ -177,7 +177,8 @@ config P2040_RDB
 	select PPC_E500MC
 	select PHYS_64BIT
 	select SWIOTLB
-	select MPC8xxx_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	select GPIO_MPC8XXX
 	select HAS_RAPIDIO
 	select PPC_EPAPR_HV_PIC
 	help
@@ -189,7 +190,8 @@ config P3041_DS
 	select PPC_E500MC
 	select PHYS_64BIT
 	select SWIOTLB
-	select MPC8xxx_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	select GPIO_MPC8XXX
 	select HAS_RAPIDIO
 	select PPC_EPAPR_HV_PIC
 	help
@@ -201,7 +203,8 @@ config P4080_DS
 	select PPC_E500MC
 	select PHYS_64BIT
 	select SWIOTLB
-	select MPC8xxx_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	select GPIO_MPC8XXX
 	select HAS_RAPIDIO
 	select PPC_EPAPR_HV_PIC
 	help
@@ -216,7 +219,8 @@ config P5020_DS
 	select PPC_E500MC
 	select PHYS_64BIT
 	select SWIOTLB
-	select MPC8xxx_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	select GPIO_MPC8XXX
 	select HAS_RAPIDIO
 	select PPC_EPAPR_HV_PIC
 	help

arch/powerpc/platforms/86xx/Kconfig

@@ -4,6 +4,7 @@ menuconfig PPC_86xx
 	depends on 6xx
 	select FSL_SOC
 	select ALTIVEC
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	help
 	  The Freescale E600 SoCs have 74xx cores.
 

arch/powerpc/platforms/Kconfig

@@ -334,16 +334,6 @@ config OF_RTC
 
 source "arch/powerpc/sysdev/bestcomm/Kconfig"
 
-config MPC8xxx_GPIO
-	bool "MPC512x/MPC8xxx GPIO support"
-	depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \
-		   FSL_SOC_BOOKE || PPC_86xx
-	select GENERIC_GPIO
-	select ARCH_REQUIRE_GPIOLIB
-	help
-	  Say Y here if you're going to use hardware that connects to the
-	  MPC512x/831x/834x/837x/8572/8610 GPIOs.
-
 config SIMPLE_GPIO
 	bool "Support for simple, memory-mapped GPIO controllers"
 	depends on PPC

arch/powerpc/sysdev/Makefile

@@ -18,7 +18,6 @@ obj-$(CONFIG_FSL_PCI)		+= fsl_pci.o $(fsl-msi-obj-y)
 obj-$(CONFIG_FSL_PMC)		+= fsl_pmc.o
 obj-$(CONFIG_FSL_LBC)		+= fsl_lbc.o
 obj-$(CONFIG_FSL_GTM)		+= fsl_gtm.o
-obj-$(CONFIG_MPC8xxx_GPIO)	+= mpc8xxx_gpio.o
 obj-$(CONFIG_FSL_85XX_CACHE_SRAM)	+= fsl_85xx_l2ctlr.o fsl_85xx_cache_sram.o
 obj-$(CONFIG_SIMPLE_GPIO)	+= simple_gpio.o
 obj-$(CONFIG_FSL_RIO)		+= fsl_rio.o

drivers/gpio/Kconfig

@@ -103,6 +103,14 @@ config GPIO_MPC5200
 	def_bool y
 	depends on PPC_MPC52xx
 
+config GPIO_MPC8XXX
+	bool "MPC512x/MPC8xxx GPIO support"
+	depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \
+		   FSL_SOC_BOOKE || PPC_86xx
+	help
+	  Say Y here if you're going to use hardware that connects to the
+	  MPC512x/831x/834x/837x/8572/8610 GPIOs.
+
 config GPIO_MSM_V1
 	tristate "Qualcomm MSM GPIO v1"
 	depends on GPIOLIB && ARCH_MSM

drivers/gpio/Makefile

@@ -27,6 +27,7 @@ obj-$(CONFIG_GPIO_MC33880)	+= gpio-mc33880.o
 obj-$(CONFIG_GPIO_MCP23S08)	+= gpio-mcp23s08.o
 obj-$(CONFIG_GPIO_ML_IOH)	+= gpio-ml-ioh.o
 obj-$(CONFIG_GPIO_MPC5200)	+= gpio-mpc5200.o
+obj-$(CONFIG_GPIO_MPC8XXX)	+= gpio-mpc8xxx.o
 obj-$(CONFIG_GPIO_MSM_V1)	+= gpio-msm-v1.o
 obj-$(CONFIG_GPIO_MSM_V2)	+= gpio-msm-v2.o
 obj-$(CONFIG_GPIO_MXC)		+= gpio-mxc.o