提交 c57ee096 编写于 作者: A Andrew Victor 提交者: Jeff Garzik

[PATCH] AT91RM9200 Ethernet: Remove 'at91_dev' and use netdev_priv()

Remove the global 'at91_dev' variable.
Use netdev_priv() instead of casting dev->priv directly.
Signed-off-by: NAndrew Victor <andrew@sanpeople.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>
上级 8d1413b2
......@@ -41,8 +41,6 @@
#define DRV_NAME "at91_ether"
#define DRV_VERSION "1.0"
static struct net_device *at91_dev;
static struct timer_list check_timer;
#define LINK_POLL_INTERVAL (HZ)
......@@ -146,7 +144,7 @@ static void read_phy(unsigned char phy_addr, unsigned char address, unsigned int
*/
static void update_linkspeed(struct net_device *dev, int silent)
{
struct at91_private *lp = (struct at91_private *) dev->priv;
struct at91_private *lp = netdev_priv(dev);
unsigned int bmsr, bmcr, lpa, mac_cfg;
unsigned int speed, duplex;
......@@ -199,7 +197,7 @@ static void update_linkspeed(struct net_device *dev, int silent)
static irqreturn_t at91ether_phy_interrupt(int irq, void *dev_id)
{
struct net_device *dev = (struct net_device *) dev_id;
struct at91_private *lp = (struct at91_private *) dev->priv;
struct at91_private *lp = netdev_priv(dev);
unsigned int phy;
/*
......@@ -242,7 +240,7 @@ static irqreturn_t at91ether_phy_interrupt(int irq, void *dev_id)
*/
static void enable_phyirq(struct net_device *dev)
{
struct at91_private *lp = (struct at91_private *) dev->priv;
struct at91_private *lp = netdev_priv(dev);
unsigned int dsintr, irq_number;
int status;
......@@ -294,7 +292,7 @@ static void enable_phyirq(struct net_device *dev)
*/
static void disable_phyirq(struct net_device *dev)
{
struct at91_private *lp = (struct at91_private *) dev->priv;
struct at91_private *lp = netdev_priv(dev);
unsigned int dsintr;
unsigned int irq_number;
......@@ -340,7 +338,7 @@ static void disable_phyirq(struct net_device *dev)
#if 0
static void reset_phy(struct net_device *dev)
{
struct at91_private *lp = (struct at91_private *) dev->priv;
struct at91_private *lp = netdev_priv(dev);
unsigned int bmcr;
spin_lock_irq(&lp->lock);
......@@ -590,7 +588,7 @@ static void mdio_write(struct net_device *dev, int phy_id, int location, int val
static int at91ether_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct at91_private *lp = (struct at91_private *) dev->priv;
struct at91_private *lp = netdev_priv(dev);
int ret;
spin_lock_irq(&lp->lock);
......@@ -611,7 +609,7 @@ static int at91ether_get_settings(struct net_device *dev, struct ethtool_cmd *cm
static int at91ether_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct at91_private *lp = (struct at91_private *) dev->priv;
struct at91_private *lp = netdev_priv(dev);
int ret;
spin_lock_irq(&lp->lock);
......@@ -627,7 +625,7 @@ static int at91ether_set_settings(struct net_device *dev, struct ethtool_cmd *cm
static int at91ether_nwayreset(struct net_device *dev)
{
struct at91_private *lp = (struct at91_private *) dev->priv;
struct at91_private *lp = netdev_priv(dev);
int ret;
spin_lock_irq(&lp->lock);
......@@ -658,7 +656,7 @@ static const struct ethtool_ops at91ether_ethtool_ops = {
static int at91ether_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
struct at91_private *lp = (struct at91_private *) dev->priv;
struct at91_private *lp = netdev_priv(dev);
int res;
if (!netif_running(dev))
......@@ -680,7 +678,7 @@ static int at91ether_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
*/
static void at91ether_start(struct net_device *dev)
{
struct at91_private *lp = (struct at91_private *) dev->priv;
struct at91_private *lp = netdev_priv(dev);
struct recv_desc_bufs *dlist, *dlist_phys;
int i;
unsigned long ctl;
......@@ -712,7 +710,7 @@ static void at91ether_start(struct net_device *dev)
*/
static int at91ether_open(struct net_device *dev)
{
struct at91_private *lp = (struct at91_private *) dev->priv;
struct at91_private *lp = netdev_priv(dev);
unsigned long ctl;
if (!is_valid_ether_addr(dev->dev_addr))
......@@ -752,7 +750,7 @@ static int at91ether_open(struct net_device *dev)
*/
static int at91ether_close(struct net_device *dev)
{
struct at91_private *lp = (struct at91_private *) dev->priv;
struct at91_private *lp = netdev_priv(dev);
unsigned long ctl;
/* Disable Receiver and Transmitter */
......@@ -779,7 +777,7 @@ static int at91ether_close(struct net_device *dev)
*/
static int at91ether_tx(struct sk_buff *skb, struct net_device *dev)
{
struct at91_private *lp = (struct at91_private *) dev->priv;
struct at91_private *lp = netdev_priv(dev);
if (at91_emac_read(AT91_EMAC_TSR) & AT91_EMAC_TSR_BNQ) {
netif_stop_queue(dev);
......@@ -811,7 +809,7 @@ static int at91ether_tx(struct sk_buff *skb, struct net_device *dev)
*/
static struct net_device_stats *at91ether_stats(struct net_device *dev)
{
struct at91_private *lp = (struct at91_private *) dev->priv;
struct at91_private *lp = netdev_priv(dev);
int ale, lenerr, seqe, lcol, ecol;
if (netif_running(dev)) {
......@@ -847,7 +845,7 @@ static struct net_device_stats *at91ether_stats(struct net_device *dev)
*/
static void at91ether_rx(struct net_device *dev)
{
struct at91_private *lp = (struct at91_private *) dev->priv;
struct at91_private *lp = netdev_priv(dev);
struct recv_desc_bufs *dlist;
unsigned char *p_recv;
struct sk_buff *skb;
......@@ -891,7 +889,7 @@ static void at91ether_rx(struct net_device *dev)
static irqreturn_t at91ether_interrupt(int irq, void *dev_id)
{
struct net_device *dev = (struct net_device *) dev_id;
struct at91_private *lp = (struct at91_private *) dev->priv;
struct at91_private *lp = netdev_priv(dev);
unsigned long intstatus, ctl;
/* MAC Interrupt Status register indicates what interrupts are pending.
......@@ -939,9 +937,6 @@ static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_add
unsigned int val;
int res;
if (at91_dev) /* already initialized */
return 0;
dev = alloc_etherdev(sizeof(struct at91_private));
if (!dev)
return -ENOMEM;
......@@ -957,7 +952,7 @@ static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_add
}
/* Allocate memory for DMA Receive descriptors */
lp = (struct at91_private *)dev->priv;
lp = netdev_priv(dev);
lp->dlist = (struct recv_desc_bufs *) dma_alloc_coherent(NULL, sizeof(struct recv_desc_bufs), (dma_addr_t *) &lp->dlist_phys, GFP_KERNEL);
if (lp->dlist == NULL) {
free_irq(dev->irq, dev);
......@@ -1024,7 +1019,6 @@ static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_add
dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys);
return res;
}
at91_dev = dev;
/* Determine current link speed */
spin_lock_irq(&lp->lock);
......@@ -1115,15 +1109,16 @@ static int __init at91ether_probe(struct platform_device *pdev)
static int __devexit at91ether_remove(struct platform_device *pdev)
{
struct at91_private *lp = (struct at91_private *) at91_dev->priv;
struct net_device *dev = platform_get_drvdata(pdev);
struct at91_private *lp = netdev_priv(dev);
unregister_netdev(at91_dev);
free_irq(at91_dev->irq, at91_dev);
unregister_netdev(dev);
free_irq(dev->irq, dev);
dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys);
clk_put(lp->ether_clk);
free_netdev(at91_dev);
at91_dev = NULL;
platform_set_drvdata(pdev, NULL);
free_netdev(dev);
return 0;
}
......@@ -1131,8 +1126,8 @@ static int __devexit at91ether_remove(struct platform_device *pdev)
static int at91ether_suspend(struct platform_device *pdev, pm_message_t mesg)
{
struct at91_private *lp = (struct at91_private *) at91_dev->priv;
struct net_device *net_dev = platform_get_drvdata(pdev);
struct at91_private *lp = netdev_priv(net_dev);
int phy_irq = lp->board_data.phy_irq_pin;
if (netif_running(net_dev)) {
......@@ -1149,8 +1144,8 @@ static int at91ether_suspend(struct platform_device *pdev, pm_message_t mesg)
static int at91ether_resume(struct platform_device *pdev)
{
struct at91_private *lp = (struct at91_private *) at91_dev->priv;
struct net_device *net_dev = platform_get_drvdata(pdev);
struct at91_private *lp = netdev_priv(net_dev);
int phy_irq = lp->board_data.phy_irq_pin;
if (netif_running(net_dev)) {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册