diff --git a/arch/mips/include/asm/mach-loongson/irq.h b/arch/mips/include/asm/mach-loongson/irq.h index 0c77b22a663012637c0344a3848691dd275625ac..34560bda6626da7fc7e18fab15744f1671ed5e7c 100644 --- a/arch/mips/include/asm/mach-loongson/irq.h +++ b/arch/mips/include/asm/mach-loongson/irq.h @@ -37,6 +37,7 @@ #endif +extern void fixup_irqs(void); extern void loongson3_ipi_interrupt(struct pt_regs *regs); #include_next diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h index f185907e8ce3ba3fdb666dfefbe6e73c921f5a77..f3fd1eb8e3ddeb3695c49cc838b06841c610da44 100644 --- a/arch/mips/include/asm/mach-loongson/loongson.h +++ b/arch/mips/include/asm/mach-loongson/loongson.h @@ -249,6 +249,9 @@ static inline void do_perfcnt_IRQ(void) #define LOONGSON_PXARB_CFG LOONGSON_REG(LOONGSON_REGBASE + 0x68) #define LOONGSON_PXARB_STATUS LOONGSON_REG(LOONGSON_REGBASE + 0x6c) +/* Chip Config */ +#define LOONGSON_CHIPCFG0 LOONGSON_REG(LOONGSON_REGBASE + 0x80) + /* pcimap */ #define LOONGSON_PCIMAP_PCIMAP_LO0 0x0000003f @@ -264,9 +267,6 @@ static inline void do_perfcnt_IRQ(void) #ifdef CONFIG_CPU_SUPPORTS_CPUFREQ #include extern struct cpufreq_frequency_table loongson2_clockmod_table[]; - -/* Chip Config */ -#define LOONGSON_CHIPCFG0 LOONGSON_REG(LOONGSON_REGBASE + 0x80) #endif /* diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h index eb60087584844381a717bf6dc1ffdf39508dcf1a..efa02acd3dd5593849f470f90749f54b760d525f 100644 --- a/arch/mips/include/asm/smp.h +++ b/arch/mips/include/asm/smp.h @@ -42,6 +42,7 @@ extern int __cpu_logical_map[NR_CPUS]; #define SMP_ICACHE_FLUSH 0x4 /* Used by kexec crashdump to save all cpu's state */ #define SMP_DUMP 0x8 +#define SMP_ASK_C0COUNT 0x10 extern volatile cpumask_t cpu_callin_map; diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig index a5d46f5efe03d1dea580e0a94f5862b709813ed4..7397be226a06a2a7d0481fac7b2dd476d4fe6d3a 100644 --- a/arch/mips/loongson/Kconfig +++ b/arch/mips/loongson/Kconfig @@ -79,6 +79,7 @@ config LEMOTE_MACH3A select SYS_HAS_CPU_LOONGSON3 select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_SMP + select SYS_SUPPORTS_HOTPLUG_CPU select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_HIGHMEM select SYS_SUPPORTS_LITTLE_ENDIAN diff --git a/arch/mips/loongson/loongson-3/irq.c b/arch/mips/loongson/loongson-3/irq.c index 088fd5e4fd64475ab7d7732eee2525fb1ba88d87..f240828181ff47ad8f7b2e807c456447daa42b3a 100644 --- a/arch/mips/loongson/loongson-3/irq.c +++ b/arch/mips/loongson/loongson-3/irq.c @@ -114,3 +114,13 @@ void __init mach_init_irq(void) set_c0_status(STATUSF_IP2 | STATUSF_IP6); } + +#ifdef CONFIG_HOTPLUG_CPU + +void fixup_irqs(void) +{ + irq_cpu_offline(); + clear_c0_status(ST0_IM); +} + +#endif diff --git a/arch/mips/loongson/loongson-3/smp.c b/arch/mips/loongson/loongson-3/smp.c index 93483c25b4b98163e8518b7e58ce794ebb52c9da..c665fe16d4c94046568e63a2a24bb6cb3614a836 100644 --- a/arch/mips/loongson/loongson-3/smp.c +++ b/arch/mips/loongson/loongson-3/smp.c @@ -23,10 +23,14 @@ #include #include #include +#include #include #include "smp.h" +DEFINE_PER_CPU(int, cpu_state); +DEFINE_PER_CPU(uint32_t, core0_c0count); + /* read a 32bit value from ipi register */ #define loongson3_ipi_read32(addr) readl(addr) /* read a 64bit value from ipi register */ @@ -158,8 +162,8 @@ loongson3_send_ipi_mask(const struct cpumask *mask, unsigned int action) void loongson3_ipi_interrupt(struct pt_regs *regs) { - int cpu = smp_processor_id(); - unsigned int action; + int i, cpu = smp_processor_id(); + unsigned int action, c0count; /* Load the ipi register to figure out what we're supposed to do */ action = loongson3_ipi_read32(ipi_status0_regs[cpu]); @@ -172,14 +176,24 @@ void loongson3_ipi_interrupt(struct pt_regs *regs) if (action & SMP_CALL_FUNCTION) smp_call_function_interrupt(); + + if (action & SMP_ASK_C0COUNT) { + BUG_ON(cpu != 0); + c0count = read_c0_count(); + for (i = 1; i < loongson_sysconf.nr_cpus; i++) + per_cpu(core0_c0count, i) = c0count; + } } +#define MAX_LOOPS 1111 /* * SMP init and finish on secondary CPUs */ static void loongson3_init_secondary(void) { int i; + uint32_t initcount; + unsigned int cpu = smp_processor_id(); unsigned int imask = STATUSF_IP7 | STATUSF_IP6 | STATUSF_IP3 | STATUSF_IP2; @@ -188,6 +202,21 @@ static void loongson3_init_secondary(void) for (i = 0; i < loongson_sysconf.nr_cpus; i++) loongson3_ipi_write32(0xffffffff, ipi_en0_regs[i]); + + per_cpu(cpu_state, cpu) = CPU_ONLINE; + + i = 0; + __get_cpu_var(core0_c0count) = 0; + loongson3_send_ipi_single(0, SMP_ASK_C0COUNT); + while (!__get_cpu_var(core0_c0count)) { + i++; + cpu_relax(); + } + + if (i > MAX_LOOPS) + i = MAX_LOOPS; + initcount = __get_cpu_var(core0_c0count) + i; + write_c0_count(initcount); } static void loongson3_smp_finish(void) @@ -222,6 +251,8 @@ static void __init loongson3_smp_setup(void) static void __init loongson3_prepare_cpus(unsigned int max_cpus) { + init_cpu_present(cpu_possible_mask); + per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE; } /* @@ -255,6 +286,147 @@ static void __init loongson3_cpus_done(void) { } +#ifdef CONFIG_HOTPLUG_CPU + +static int loongson3_cpu_disable(void) +{ + unsigned long flags; + unsigned int cpu = smp_processor_id(); + + if (cpu == 0) + return -EBUSY; + + set_cpu_online(cpu, false); + cpu_clear(cpu, cpu_callin_map); + local_irq_save(flags); + fixup_irqs(); + local_irq_restore(flags); + flush_cache_all(); + local_flush_tlb_all(); + + return 0; +} + + +static void loongson3_cpu_die(unsigned int cpu) +{ + while (per_cpu(cpu_state, cpu) != CPU_DEAD) + cpu_relax(); + + mb(); +} + +/* To shutdown a core in Loongson 3, the target core should go to CKSEG1 and + * flush all L1 entries at first. Then, another core (usually Core 0) can + * safely disable the clock of the target core. loongson3_play_dead() is + * called via CKSEG1 (uncached and unmmaped) */ +static void loongson3_play_dead(int *state_addr) +{ + register int val; + register long cpuid, core, node, count; + register void *addr, *base, *initfunc; + + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " li %[addr], 0x80000000 \n" /* KSEG0 */ + "1: cache 0, 0(%[addr]) \n" /* flush L1 ICache */ + " cache 0, 1(%[addr]) \n" + " cache 0, 2(%[addr]) \n" + " cache 0, 3(%[addr]) \n" + " cache 1, 0(%[addr]) \n" /* flush L1 DCache */ + " cache 1, 1(%[addr]) \n" + " cache 1, 2(%[addr]) \n" + " cache 1, 3(%[addr]) \n" + " addiu %[sets], %[sets], -1 \n" + " bnez %[sets], 1b \n" + " addiu %[addr], %[addr], 0x20 \n" + " li %[val], 0x7 \n" /* *state_addr = CPU_DEAD; */ + " sw %[val], (%[state_addr]) \n" + " sync \n" + " cache 21, (%[state_addr]) \n" /* flush entry of *state_addr */ + " .set pop \n" + : [addr] "=&r" (addr), [val] "=&r" (val) + : [state_addr] "r" (state_addr), + [sets] "r" (cpu_data[smp_processor_id()].dcache.sets)); + + __asm__ __volatile__( + " .set push \n" + " .set noreorder \n" + " .set mips64 \n" + " mfc0 %[cpuid], $15, 1 \n" + " andi %[cpuid], 0x3ff \n" + " dli %[base], 0x900000003ff01000 \n" + " andi %[core], %[cpuid], 0x3 \n" + " sll %[core], 8 \n" /* get core id */ + " or %[base], %[base], %[core] \n" + " andi %[node], %[cpuid], 0xc \n" + " dsll %[node], 42 \n" /* get node id */ + " or %[base], %[base], %[node] \n" + "1: li %[count], 0x100 \n" /* wait for init loop */ + "2: bnez %[count], 2b \n" /* limit mailbox access */ + " addiu %[count], -1 \n" + " ld %[initfunc], 0x20(%[base]) \n" /* get PC via mailbox */ + " beqz %[initfunc], 1b \n" + " nop \n" + " ld $sp, 0x28(%[base]) \n" /* get SP via mailbox */ + " ld $gp, 0x30(%[base]) \n" /* get GP via mailbox */ + " ld $a1, 0x38(%[base]) \n" + " jr %[initfunc] \n" /* jump to initial PC */ + " nop \n" + " .set pop \n" + : [core] "=&r" (core), [node] "=&r" (node), + [base] "=&r" (base), [cpuid] "=&r" (cpuid), + [count] "=&r" (count), [initfunc] "=&r" (initfunc) + : /* No Input */ + : "a1"); +} + +void play_dead(void) +{ + int *state_addr; + unsigned int cpu = smp_processor_id(); + void (*play_dead_at_ckseg1)(int *); + + idle_task_exit(); + play_dead_at_ckseg1 = + (void *)CKSEG1ADDR((unsigned long)loongson3_play_dead); + state_addr = &per_cpu(cpu_state, cpu); + mb(); + play_dead_at_ckseg1(state_addr); +} + +#define CPU_POST_DEAD_FROZEN (CPU_POST_DEAD | CPU_TASKS_FROZEN) +static int loongson3_cpu_callback(struct notifier_block *nfb, + unsigned long action, void *hcpu) +{ + unsigned int cpu = (unsigned long)hcpu; + + switch (action) { + case CPU_POST_DEAD: + case CPU_POST_DEAD_FROZEN: + pr_info("Disable clock for CPU#%d\n", cpu); + LOONGSON_CHIPCFG0 &= ~(1 << (12 + cpu)); + break; + case CPU_UP_PREPARE: + case CPU_UP_PREPARE_FROZEN: + pr_info("Enable clock for CPU#%d\n", cpu); + LOONGSON_CHIPCFG0 |= 1 << (12 + cpu); + break; + } + + return NOTIFY_OK; +} + +static int register_loongson3_notifier(void) +{ + hotcpu_notifier(loongson3_cpu_callback, 0); + return 0; +} +early_initcall(register_loongson3_notifier); + +#endif + struct plat_smp_ops loongson3_smp_ops = { .send_ipi_single = loongson3_send_ipi_single, .send_ipi_mask = loongson3_send_ipi_mask, @@ -264,4 +436,8 @@ struct plat_smp_ops loongson3_smp_ops = { .boot_secondary = loongson3_boot_secondary, .smp_setup = loongson3_smp_setup, .prepare_cpus = loongson3_prepare_cpus, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_disable = loongson3_cpu_disable, + .cpu_die = loongson3_cpu_die, +#endif };