提交 c408a379 编写于 作者: K Kristen Accardi 提交者: Greg Kroah-Hartman

[PATCH] PCI: quirk for IBM Dock II cardbus controllers

The IBM Dock II cardbus bridges require some extra configuration
before Yenta is loaded in order to setup the Interrupts to be
routed properly.
Signed-off-by: NKristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
上级 e3ac86d8
......@@ -1242,6 +1242,33 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_pc
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_pcie_pxh);
/*
* Fixup the cardbus bridges on the IBM Dock II docking station
*/
static void __devinit quirk_ibm_dock2_cardbus(struct pci_dev *dev)
{
u32 val;
/*
* tie the 2 interrupt pins to INTA, and configure the
* multifunction routing register to handle this.
*/
if ((dev->subsystem_vendor == PCI_VENDOR_ID_IBM) &&
(dev->subsystem_device == 0x0148)) {
printk(KERN_INFO "PCI: Found IBM Dock II Cardbus Bridge "
"applying quirk\n");
pci_read_config_dword(dev, 0x8c, &val);
val = ((val & 0xffffff00) | 0x1002);
pci_write_config_dword(dev, 0x8c, val);
pci_read_config_dword(dev, 0x80, &val);
val = ((val & 0x00ffff00) | 0x2864c077);
pci_write_config_dword(dev, 0x80, val);
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1420,
quirk_ibm_dock2_cardbus);
static void __devinit quirk_netmos(struct pci_dev *dev)
{
unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册