提交 be2dc859 编写于 作者: L Lars Povlsen 提交者: Linus Walleij

pinctrl: pinctrl-microchip-sgpio: Add irq support (for sparx5)

This adds 'interrupt-controller' features for the signals available on
the Microchip SGPIO controller, however only for controller versions
on the Sparx5 platform (or later).
Signed-off-by: NLars Povlsen <lars.povlsen@microchip.com>
Link: https://lore.kernel.org/r/20201209142753.683208-2-lars.povlsen@microchip.com
[Select GPIOLIB_IRQCHIP in Kconfig]
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
上级 6e261d10
......@@ -380,6 +380,7 @@ config PINCTRL_MICROCHIP_SGPIO
depends on OF
depends on HAS_IOMEM
select GPIOLIB
select GPIOLIB_IRQCHIP
select GENERIC_PINCONF
select GENERIC_PINCTRL_GROUPS
select GENERIC_PINMUX_FUNCTIONS
......
......@@ -31,6 +31,11 @@ enum {
REG_PORT_ENABLE,
REG_SIO_CONFIG,
REG_SIO_CLOCK,
REG_INT_POLARITY,
REG_INT_TRIGGER,
REG_INT_ACK,
REG_INT_ENABLE,
REG_INT_IDENT,
MAXREG
};
......@@ -40,8 +45,13 @@ enum {
SGPIO_ARCH_SPARX5,
};
enum {
SGPIO_FLAGS_HAS_IRQ = BIT(0),
};
struct sgpio_properties {
int arch;
int flags;
u8 regoff[MAXREG];
};
......@@ -60,6 +70,16 @@ struct sgpio_properties {
#define SGPIO_SPARX5_CLK_FREQ GENMASK(19, 8)
#define SGPIO_SPARX5_BIT_SOURCE GENMASK(23, 12)
#define SGPIO_MASTER_INTR_ENA BIT(0)
#define SGPIO_INT_TRG_LEVEL 0
#define SGPIO_INT_TRG_EDGE 1
#define SGPIO_INT_TRG_EDGE_FALL 2
#define SGPIO_INT_TRG_EDGE_RISE 3
#define SGPIO_TRG_LEVEL_HIGH 0
#define SGPIO_TRG_LEVEL_LOW 1
static const struct sgpio_properties properties_luton = {
.arch = SGPIO_ARCH_LUTON,
.regoff = { 0x00, 0x09, 0x29, 0x2a, 0x2b },
......@@ -72,7 +92,8 @@ static const struct sgpio_properties properties_ocelot = {
static const struct sgpio_properties properties_sparx5 = {
.arch = SGPIO_ARCH_SPARX5,
.regoff = { 0x00, 0x06, 0x26, 0x04, 0x05 },
.flags = SGPIO_FLAGS_HAS_IRQ,
.regoff = { 0x00, 0x06, 0x26, 0x04, 0x05, 0x2a, 0x32, 0x3a, 0x3e, 0x42 },
};
static const char * const functions[] = { "gpio" };
......@@ -107,6 +128,11 @@ static inline void sgpio_pin_to_addr(struct sgpio_priv *priv, int pin,
addr->bit = pin % priv->bitcount;
}
static inline int sgpio_addr_to_pin(struct sgpio_priv *priv, int port, int bit)
{
return bit + port * priv->bitcount;
}
static inline u32 sgpio_readl(struct sgpio_priv *priv, u32 rno, u32 off)
{
u32 __iomem *reg = &priv->regs[priv->properties->regoff[rno] + off];
......@@ -478,7 +504,7 @@ static int microchip_sgpio_of_xlate(struct gpio_chip *gc,
gpiospec->args[1] > priv->bitcount)
return -EINVAL;
pin = gpiospec->args[1] + gpiospec->args[0] * priv->bitcount;
pin = sgpio_addr_to_pin(priv, gpiospec->args[0], gpiospec->args[1]);
if (pin > gc->ngpio)
return -EINVAL;
......@@ -527,6 +553,133 @@ static int microchip_sgpio_get_ports(struct sgpio_priv *priv)
return 0;
}
static void microchip_sgpio_irq_settype(struct irq_data *data,
int type,
int polarity)
{
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
struct sgpio_bank *bank = gpiochip_get_data(chip);
unsigned int gpio = irqd_to_hwirq(data);
struct sgpio_port_addr addr;
u32 ena;
sgpio_pin_to_addr(bank->priv, gpio, &addr);
/* Disable interrupt while changing type */
ena = sgpio_readl(bank->priv, REG_INT_ENABLE, addr.bit);
sgpio_writel(bank->priv, ena & ~BIT(addr.port), REG_INT_ENABLE, addr.bit);
/* Type value spread over 2 registers sets: low, high bit */
sgpio_clrsetbits(bank->priv, REG_INT_TRIGGER, addr.bit,
BIT(addr.port), (!!(type & 0x1)) << addr.port);
sgpio_clrsetbits(bank->priv, REG_INT_TRIGGER + SGPIO_MAX_BITS, addr.bit,
BIT(addr.port), (!!(type & 0x2)) << addr.port);
if (type == SGPIO_INT_TRG_LEVEL)
sgpio_clrsetbits(bank->priv, REG_INT_POLARITY, addr.bit,
BIT(addr.port), polarity << addr.port);
/* Possibly re-enable interrupts */
sgpio_writel(bank->priv, ena, REG_INT_ENABLE, addr.bit);
}
static void microchip_sgpio_irq_setreg(struct irq_data *data,
int reg,
bool clear)
{
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
struct sgpio_bank *bank = gpiochip_get_data(chip);
unsigned int gpio = irqd_to_hwirq(data);
struct sgpio_port_addr addr;
sgpio_pin_to_addr(bank->priv, gpio, &addr);
if (clear)
sgpio_clrsetbits(bank->priv, reg, addr.bit, BIT(addr.port), 0);
else
sgpio_clrsetbits(bank->priv, reg, addr.bit, 0, BIT(addr.port));
}
static void microchip_sgpio_irq_mask(struct irq_data *data)
{
microchip_sgpio_irq_setreg(data, REG_INT_ENABLE, true);
}
static void microchip_sgpio_irq_unmask(struct irq_data *data)
{
microchip_sgpio_irq_setreg(data, REG_INT_ENABLE, false);
}
static void microchip_sgpio_irq_ack(struct irq_data *data)
{
microchip_sgpio_irq_setreg(data, REG_INT_ACK, false);
}
static int microchip_sgpio_irq_set_type(struct irq_data *data, unsigned int type)
{
type &= IRQ_TYPE_SENSE_MASK;
switch (type) {
case IRQ_TYPE_EDGE_BOTH:
irq_set_handler_locked(data, handle_edge_irq);
microchip_sgpio_irq_settype(data, SGPIO_INT_TRG_EDGE, 0);
break;
case IRQ_TYPE_EDGE_RISING:
irq_set_handler_locked(data, handle_edge_irq);
microchip_sgpio_irq_settype(data, SGPIO_INT_TRG_EDGE_RISE, 0);
break;
case IRQ_TYPE_EDGE_FALLING:
irq_set_handler_locked(data, handle_edge_irq);
microchip_sgpio_irq_settype(data, SGPIO_INT_TRG_EDGE_FALL, 0);
break;
case IRQ_TYPE_LEVEL_HIGH:
irq_set_handler_locked(data, handle_level_irq);
microchip_sgpio_irq_settype(data, SGPIO_INT_TRG_LEVEL, SGPIO_TRG_LEVEL_HIGH);
break;
case IRQ_TYPE_LEVEL_LOW:
irq_set_handler_locked(data, handle_level_irq);
microchip_sgpio_irq_settype(data, SGPIO_INT_TRG_LEVEL, SGPIO_TRG_LEVEL_LOW);
break;
default:
return -EINVAL;
}
return 0;
}
static const struct irq_chip microchip_sgpio_irqchip = {
.name = "gpio",
.irq_mask = microchip_sgpio_irq_mask,
.irq_ack = microchip_sgpio_irq_ack,
.irq_unmask = microchip_sgpio_irq_unmask,
.irq_set_type = microchip_sgpio_irq_set_type,
};
static void sgpio_irq_handler(struct irq_desc *desc)
{
struct irq_chip *parent_chip = irq_desc_get_chip(desc);
struct gpio_chip *chip = irq_desc_get_handler_data(desc);
struct sgpio_bank *bank = gpiochip_get_data(chip);
struct sgpio_priv *priv = bank->priv;
int bit, port, gpio;
long val;
for (bit = 0; bit < priv->bitcount; bit++) {
val = sgpio_readl(priv, REG_INT_IDENT, bit);
if (!val)
continue;
chained_irq_enter(parent_chip, desc);
for_each_set_bit(port, &val, SGPIO_BITS_PER_WORD) {
gpio = sgpio_addr_to_pin(priv, port, bit);
generic_handle_irq(irq_linear_revmap(chip->irq.domain, gpio));
}
chained_irq_exit(parent_chip, desc);
}
}
static int microchip_sgpio_register_bank(struct device *dev,
struct sgpio_priv *priv,
struct fwnode_handle *fwnode,
......@@ -608,6 +761,36 @@ static int microchip_sgpio_register_bank(struct device *dev,
gc->base = -1;
gc->ngpio = ngpios;
if (bank->is_input && priv->properties->flags & SGPIO_FLAGS_HAS_IRQ) {
int irq = fwnode_irq_get(fwnode, 0);
if (irq) {
struct gpio_irq_chip *girq = &gc->irq;
girq->chip = devm_kmemdup(dev, &microchip_sgpio_irqchip,
sizeof(microchip_sgpio_irqchip),
GFP_KERNEL);
if (!girq->chip)
return -ENOMEM;
girq->parent_handler = sgpio_irq_handler;
girq->num_parents = 1;
girq->parents = devm_kcalloc(dev, 1,
sizeof(*girq->parents),
GFP_KERNEL);
if (!girq->parents)
return -ENOMEM;
girq->parents[0] = irq;
girq->default_type = IRQ_TYPE_NONE;
girq->handler = handle_bad_irq;
/* Disable all individual pins */
for (i = 0; i < SGPIO_MAX_BITS; i++)
sgpio_writel(priv, 0, REG_INT_ENABLE, i);
/* Master enable */
sgpio_clrsetbits(priv, REG_SIO_CONFIG, 0, 0, SGPIO_MASTER_INTR_ENA);
}
}
ret = devm_gpiochip_add_data(dev, gc, bank);
if (ret)
dev_err(dev, "Failed to register: ret %d\n", ret);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册