提交 be1dd78d 编写于 作者: E Eric Sandeen 提交者: James Bottomley

[SCSI] scsi_debug: add LBPRZ support

Add LBPRZ support to scsi_debug; i.e. read zeros for
unmapped blocks.

Rather than checking for unmapped blocks at
read time, this just zeroes them on the backing store
at unmap time so it behaves the same way.

This also adds a module parameter to disable it.

lbprz, "unmapped blocks return 0 on read (def=1)"

[jejb: fix whitespace errors]
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Acked-by: NDouglas Gilbert <dgilbert@interlog.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
上级 49d0e64b
......@@ -101,6 +101,7 @@ static const char * scsi_debug_version_date = "20100324";
#define DEF_LBPU 0
#define DEF_LBPWS 0
#define DEF_LBPWS10 0
#define DEF_LBPRZ 1
#define DEF_LOWEST_ALIGNED 0
#define DEF_NO_LUN_0 0
#define DEF_NUM_PARTS 0
......@@ -186,6 +187,7 @@ static int scsi_debug_vpd_use_hostno = DEF_VPD_USE_HOSTNO;
static unsigned int scsi_debug_lbpu = DEF_LBPU;
static unsigned int scsi_debug_lbpws = DEF_LBPWS;
static unsigned int scsi_debug_lbpws10 = DEF_LBPWS10;
static unsigned int scsi_debug_lbprz = DEF_LBPRZ;
static unsigned int scsi_debug_unmap_alignment = DEF_UNMAP_ALIGNMENT;
static unsigned int scsi_debug_unmap_granularity = DEF_UNMAP_GRANULARITY;
static unsigned int scsi_debug_unmap_max_blocks = DEF_UNMAP_MAX_BLOCKS;
......@@ -775,7 +777,7 @@ static int inquiry_evpd_b1(unsigned char *arr)
return 0x3c;
}
/* Thin provisioning VPD page (SBC-3) */
/* Logical block provisioning VPD page (SBC-3) */
static int inquiry_evpd_b2(unsigned char *arr)
{
memset(arr, 0, 0x8);
......@@ -790,6 +792,9 @@ static int inquiry_evpd_b2(unsigned char *arr)
if (scsi_debug_lbpws10)
arr[1] |= 1 << 5;
if (scsi_debug_lbprz)
arr[1] |= 1 << 2;
return 0x8;
}
......@@ -1071,8 +1076,11 @@ static int resp_readcap16(struct scsi_cmnd * scp,
arr[13] = scsi_debug_physblk_exp & 0xf;
arr[14] = (scsi_debug_lowest_aligned >> 8) & 0x3f;
if (scsi_debug_lbp())
if (scsi_debug_lbp()) {
arr[14] |= 0x80; /* LBPME */
if (scsi_debug_lbprz)
arr[14] |= 0x40; /* LBPRZ */
}
arr[15] = scsi_debug_lowest_aligned & 0xff;
......@@ -2046,10 +2054,13 @@ static void unmap_region(sector_t lba, unsigned int len)
block = lba + alignment;
rem = do_div(block, granularity);
if (rem == 0 && lba + granularity <= end &&
block < map_size)
if (rem == 0 && lba + granularity <= end && block < map_size) {
clear_bit(block, map_storep);
if (scsi_debug_lbprz)
memset(fake_storep +
block * scsi_debug_sector_size, 0,
scsi_debug_sector_size);
}
lba += granularity - rem;
}
}
......@@ -2731,6 +2742,7 @@ module_param_named(guard, scsi_debug_guard, int, S_IRUGO);
module_param_named(lbpu, scsi_debug_lbpu, int, S_IRUGO);
module_param_named(lbpws, scsi_debug_lbpws, int, S_IRUGO);
module_param_named(lbpws10, scsi_debug_lbpws10, int, S_IRUGO);
module_param_named(lbprz, scsi_debug_lbprz, int, S_IRUGO);
module_param_named(lowest_aligned, scsi_debug_lowest_aligned, int, S_IRUGO);
module_param_named(max_luns, scsi_debug_max_luns, int, S_IRUGO | S_IWUSR);
module_param_named(max_queue, scsi_debug_max_queue, int, S_IRUGO | S_IWUSR);
......@@ -2772,6 +2784,7 @@ MODULE_PARM_DESC(guard, "protection checksum: 0=crc, 1=ip (def=0)");
MODULE_PARM_DESC(lbpu, "enable LBP, support UNMAP command (def=0)");
MODULE_PARM_DESC(lbpws, "enable LBP, support WRITE SAME(16) with UNMAP bit (def=0)");
MODULE_PARM_DESC(lbpws10, "enable LBP, support WRITE SAME(10) with UNMAP bit (def=0)");
MODULE_PARM_DESC(lbprz, "unmapped blocks return 0 on read (def=1)");
MODULE_PARM_DESC(lowest_aligned, "lowest aligned lba (def=0)");
MODULE_PARM_DESC(max_luns, "number of LUNs per target to simulate(def=1)");
MODULE_PARM_DESC(max_queue, "max number of queued commands (1 to 255(def))");
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册