Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 bd6709a9 编写于 作者: T Tejun Heo
浏览文件
操作

x86, NUMA: Make 32bit use common NUMA init path 

With both _numa_init() methods converted and the rest of init code
adjusted, numa_32.c now can switch from the 32bit only init code to
the common one in numa.c.

* Shim get_memcfg_*()'s are dropped and initmem_init() calls
  x86_numa_init(), which is updated to handle NUMAQ.

* All boilerplate operations including node range limiting, pgdat
  alloc/init are handled by numa_init().  32bit only implementation is
  removed.

* 32bit numa_add_memblk(), numa_set_distance() and
  memory_add_physaddr_to_nid() removed and common versions in
  numa_32.c enabled for 32bit.

This change causes the following behavior changes.

* NODE_DATA()->node_start_pfn/node_spanned_pages properly initialized
  for 32bit too.

* Much more sanity checks and configuration cleanups.

* Proper handling of node distances.

* The same NUMA init messages as 64bit.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
上级 7888e96b
显示空白变更内容
内联 并排
Showing with 7 addition and 241 deletion
arch/x86/include/asm/topology.h
浏览文件 @ bd6709a9
......@@ -93,18 +93,11 @@ extern void setup_node_to_cpumask_map(void);
#define pcibus_to_node(bus) __pcibus_to_node(bus)
#ifdef CONFIG_X86_32
extern unsigned long node_start_pfn[];
extern unsigned long node_end_pfn[];
#define node_has_online_mem(nid) (node_start_pfn[nid] != node_end_pfn[nid])
# define SD_CACHE_NICE_TRIES 1
# define SD_IDLE_IDX 1
#else
# define SD_CACHE_NICE_TRIES 2
# define SD_IDLE_IDX 2
#endif
/* sched_domains SD_NODE_INIT for NUMA machines */
......
arch/x86/mm/numa.c
浏览文件 @ bd6709a9
......@@ -173,7 +173,6 @@ void __init numa_remove_memblk_from(int idx, struct numa_meminfo *mi)
(mi->nr_blks - idx) * sizeof(mi->blk[0]));
}
#ifdef CONFIG_X86_64
/**
* numa_add_memblk - Add one numa_memblk to numa_meminfo
* @nid: NUMA node ID of the new memblk
......@@ -189,7 +188,6 @@ int __init numa_add_memblk(int nid, u64 start, u64 end)
{
return numa_add_memblk_to(nid, start, end, &numa_meminfo);
}
#endif
/* Initialize bootmem allocator for a node */
static void __init setup_node_bootmem(int nid, u64 start, u64 end)
......@@ -413,7 +411,6 @@ static int __init numa_alloc_distance(void)
return 0;
}
#ifdef CONFIG_X86_64
/**
* numa_set_distance - Set NUMA distance from one NUMA to another
* @from: the 'from' node to set distance
......@@ -452,7 +449,6 @@ void __init numa_set_distance(int from, int to, int distance)
numa_distance[from * numa_distance_cnt + to] = distance;
}
#endif
int __node_distance(int from, int to)
{
......@@ -626,6 +622,10 @@ static int __init dummy_numa_init(void)
void __init x86_numa_init(void)
{
if (!numa_off) {
#ifdef CONFIG_X86_NUMAQ
if (!numa_init(numaq_numa_init))
return;
#endif
#ifdef CONFIG_ACPI_NUMA
if (!numa_init(x86_acpi_numa_init))
return;
......@@ -805,7 +805,7 @@ EXPORT_SYMBOL(cpumask_of_node);
#endif /* !CONFIG_DEBUG_PER_CPU_MAPS */
#if defined(CONFIG_X86_64) && defined(CONFIG_MEMORY_HOTPLUG)
#ifdef CONFIG_MEMORY_HOTPLUG
int memory_add_physaddr_to_nid(u64 start)
{
struct numa_meminfo *mi = &numa_meminfo;
......
arch/x86/mm/numa_32.c
浏览文件 @ bd6709a9
......@@ -22,36 +22,11 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/mm.h>
#include <linux/bootmem.h>
#include <linux/memblock.h>
#include <linux/mmzone.h>
#include <linux/highmem.h>
#include <linux/initrd.h>
#include <linux/nodemask.h>
#include <linux/module.h>
#include <linux/kexec.h>
#include <linux/pfn.h>
#include <linux/swap.h>
#include <linux/acpi.h>
#include <asm/e820.h>
#include <asm/setup.h>
#include <asm/mmzone.h>
#include <asm/bios_ebda.h>
#include <asm/proto.h>
/*
* numa interface - we expect the numa architecture specific code to have
* populated the following initialisation.
*
* 1) node_online_map - the map of all nodes configured (online) in the system
* 2) node_start_pfn - the starting page frame number for a node
* 3) node_end_pfn - the ending page fram number for a node
*/
unsigned long node_start_pfn[MAX_NUMNODES] __read_mostly;
unsigned long node_end_pfn[MAX_NUMNODES] __read_mostly;
#include "numa_internal.h"
#ifdef CONFIG_DISCONTIGMEM
/*
......@@ -96,7 +71,6 @@ unsigned long node_memmap_size_bytes(int nid, unsigned long start_pfn,
}
#endif
extern unsigned long find_max_low_pfn(void);
extern unsigned long highend_pfn, highstart_pfn;
#define LARGE_PAGE_BYTES (PTRS_PER_PTE * PAGE_SIZE)
......@@ -104,68 +78,6 @@ extern unsigned long highend_pfn, highstart_pfn;
static void *node_remap_start_vaddr[MAX_NUMNODES];
void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags);
/*
* FLAT - support for basic PC memory model with discontig enabled, essentially
* a single node with all available processors in it with a flat
* memory map.
*/
static int __init get_memcfg_numa_flat(void)
{
printk(KERN_DEBUG "NUMA - single node, flat memory mode\n");
node_start_pfn[0] = 0;
node_end_pfn[0] = max_pfn;
memblock_x86_register_active_regions(0, 0, max_pfn);
/* Indicate there is one node available. */
nodes_clear(node_online_map);
node_set_online(0);
return 1;
}
/*
* Find the highest page frame number we have available for the node
*/
static void __init propagate_e820_map_node(int nid)
{
if (node_end_pfn[nid] > max_pfn)
node_end_pfn[nid] = max_pfn;
/*
* if a user has given mem=XXXX, then we need to make sure
* that the node _starts_ before that, too, not just ends
*/
if (node_start_pfn[nid] > max_pfn)
node_start_pfn[nid] = max_pfn;
BUG_ON(node_start_pfn[nid] > node_end_pfn[nid]);
}
/*
* Allocate memory for the pg_data_t for this node via a crude pre-bootmem
* method. For node zero take this from the bottom of memory, for
* subsequent nodes place them at node_remap_start_vaddr which contains
* node local data in physically node local memory. See setup_memory()
* for details.
*/
static void __init allocate_pgdat(int nid)
{
char buf[16];
NODE_DATA(nid) = alloc_remap(nid, ALIGN(sizeof(pg_data_t), PAGE_SIZE));
if (!NODE_DATA(nid)) {
unsigned long pgdat_phys;
pgdat_phys = memblock_find_in_range(min_low_pfn<<PAGE_SHIFT,
max_pfn_mapped<<PAGE_SHIFT,
sizeof(pg_data_t),
PAGE_SIZE);
NODE_DATA(nid) = (pg_data_t *)(pfn_to_kaddr(pgdat_phys>>PAGE_SHIFT));
memset(buf, 0, sizeof(buf));
sprintf(buf, "NODE_DATA %d", nid);
memblock_x86_reserve_range(pgdat_phys, pgdat_phys + sizeof(pg_data_t), buf);
}
printk(KERN_DEBUG "allocate_pgdat: node %d NODE_DATA %08lx\n",
nid, (unsigned long)NODE_DATA(nid));
}
/*
* Remap memory allocator
*/
......@@ -322,76 +234,9 @@ void __init init_alloc_remap(int nid, u64 start, u64 end)
nid, node_pa, node_pa + size, remap_va, remap_va + size);
}
static int get_memcfg_numaq(void)
{
#ifdef CONFIG_X86_NUMAQ
int nid;
if (numa_off)
return 0;
if (numaq_numa_init() < 0) {
nodes_clear(numa_nodes_parsed);
remove_all_active_ranges();
return 0;
}
for_each_node_mask(nid, numa_nodes_parsed)
node_set_online(nid);
sort_node_map();
return 1;
#else
return 0;
#endif
}
static int get_memcfg_from_srat(void)
{
#ifdef CONFIG_ACPI_NUMA
int nid;
if (numa_off)
return 0;
if (x86_acpi_numa_init() < 0) {
nodes_clear(numa_nodes_parsed);
remove_all_active_ranges();
return 0;
}
for_each_node_mask(nid, numa_nodes_parsed)
node_set_online(nid);
sort_node_map();
return 1;
#else
return 0;
#endif
}
static void get_memcfg_numa(void)
{
if (get_memcfg_numaq())
return;
if (get_memcfg_from_srat())
return;
get_memcfg_numa_flat();
}
void __init initmem_init(void)
{
int nid;
get_memcfg_numa();
numa_init_array();
for_each_online_node(nid) {
u64 start = (u64)node_start_pfn[nid] << PAGE_SHIFT;
u64 end = min((u64)node_end_pfn[nid] << PAGE_SHIFT,
(u64)max_pfn << PAGE_SHIFT);
if (start < end)
init_alloc_remap(nid, start, end);
}
x86_numa_init();
#ifdef CONFIG_HIGHMEM
highstart_pfn = highend_pfn = max_pfn;
......@@ -412,81 +257,9 @@ void __init initmem_init(void)
printk(KERN_DEBUG "Low memory ends at vaddr %08lx\n",
(ulong) pfn_to_kaddr(max_low_pfn));
for_each_online_node(nid)
allocate_pgdat(nid);
printk(KERN_DEBUG "High memory starts at vaddr %08lx\n",
(ulong) pfn_to_kaddr(highstart_pfn));
for_each_online_node(nid)
propagate_e820_map_node(nid);
for_each_online_node(nid) {
memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
NODE_DATA(nid)->node_id = nid;
}
setup_bootmem_allocator();
}
#ifdef CONFIG_MEMORY_HOTPLUG
static int paddr_to_nid(u64 addr)
{
int nid;
unsigned long pfn = PFN_DOWN(addr);
for_each_node(nid)
if (node_start_pfn[nid] <= pfn &&
pfn < node_end_pfn[nid])
return nid;
return -1;
}
/*
* This function is used to ask node id BEFORE memmap and mem_section's
* initialization (pfn_to_nid() can't be used yet).
* If _PXM is not defined on ACPI's DSDT, node id must be found by this.
*/
int memory_add_physaddr_to_nid(u64 addr)
{
int nid = paddr_to_nid(addr);
return (nid >= 0) ? nid : 0;
}
EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
#endif
/* temporary shim, will go away soon */
int __init numa_add_memblk(int nid, u64 start, u64 end)
{
unsigned long start_pfn = start >> PAGE_SHIFT;
unsigned long end_pfn = end >> PAGE_SHIFT;
printk(KERN_DEBUG "nid %d start_pfn %08lx end_pfn %08lx\n",
nid, start_pfn, end_pfn);
if (start >= (u64)max_pfn << PAGE_SHIFT) {
printk(KERN_INFO "Ignoring SRAT pfns: %08lx - %08lx\n",
start_pfn, end_pfn);
return 0;
}
node_set_online(nid);
memblock_x86_register_active_regions(nid, start_pfn,
min(end_pfn, max_pfn));
if (!node_has_online_mem(nid)) {
node_start_pfn[nid] = start_pfn;
node_end_pfn[nid] = end_pfn;
} else {
node_start_pfn[nid] = min(node_start_pfn[nid], start_pfn);
node_end_pfn[nid] = max(node_end_pfn[nid], end_pfn);
}
return 0;
}
/* temporary shim, will go away soon */
void __init numa_set_distance(int from, int to, int distance)
{
/* nada */
}
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或