diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 2549bd82c57faac6fc9b2e15bce679b4f8b822a8..9e5272e84fd89569cf49dde07bcaecc76dce20d0 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -51,18 +51,23 @@ source "init/Kconfig"
 
 menu "System type"
 
+config SOLUTION_ENGINE
+	bool
+
 choice
 	prompt "SuperH system type"
 	default SH_UNKNOWN
 
 config SH_SOLUTION_ENGINE
 	bool "SolutionEngine"
+	select SOLUTION_ENGINE
 	help
 	  Select SolutionEngine if configuring for a Hitachi SH7709
 	  or SH7750 evaluation board.
 
 config SH_7751_SOLUTION_ENGINE
 	bool "SolutionEngine7751"
+	select SOLUTION_ENGINE
 	select CPU_SUBTYPE_SH7751
 	help
 	  Select 7751 SolutionEngine if configuring for a Hitachi SH7751
@@ -70,17 +75,27 @@ config SH_7751_SOLUTION_ENGINE
 
 config SH_7300_SOLUTION_ENGINE
 	bool "SolutionEngine7300"
+	select SOLUTION_ENGINE
 	select CPU_SUBTYPE_SH7300
 	help
-	  Select 7300 SolutionEngine if configuring for a Hitachi SH7300(SH-Mobile V)
-	  evaluation board.
+	  Select 7300 SolutionEngine if configuring for a Hitachi
+	  SH7300(SH-Mobile V) evaluation board.
+
+config SH_7343_SOLUTION_ENGINE
+	bool "SolutionEngine7343"
+	select SOLUTION_ENGINE
+	select CPU_SUBTYPE_SH7343
+	help
+	  Select 7343 SolutionEngine if configuring for a Hitachi
+	  SH7343 (SH-Mobile 3AS) evaluation board.
 
 config SH_73180_SOLUTION_ENGINE
        bool "SolutionEngine73180"
-       select CPU_SUBTYPE_SH73180
-       help
-         Select 73180 SolutionEngine if configuring for a Hitachi SH73180(SH-Mobile 3)
-         evaluation board.
+	select SOLUTION_ENGINE
+	select CPU_SUBTYPE_SH73180
+	help
+	  Select 73180 SolutionEngine if configuring for a Hitachi
+	  SH73180(SH-Mobile 3) evaluation board.
 
 config SH_7751_SYSTEMH
 	bool "SystemH7751R"
@@ -394,9 +409,7 @@ source "arch/sh/cchips/Kconfig"
 config HEARTBEAT
 	bool "Heartbeat LED"
 	depends on SH_MPC1211 || SH_SH03 || \
-		   SH_BIGSUR || \
-		   SH_7751_SOLUTION_ENGINE || SH_7300_SOLUTION_ENGINE || \
-		   SH_73180_SOLUTION_ENGINE || SH_SOLUTION_ENGINE || \
+		   SH_BIGSUR || SOLUTION_ENGINE || \
 		   SH_RTS7751R2D || SH_SH4202_MICRODEV || SH_LANDISK
 	help
 	  Use the power-on LED on your machine as a load meter.  The exact
@@ -431,10 +444,6 @@ config KEXEC
 	  support.  As of this writing the exact hardware interface is
 	  strongly in flux, so no good recommendation can be made.
 
-config PREEMPT
-	bool "Preemptible Kernel (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-
 config SMP
 	bool "Symmetric multi-processing support"
 	---help---
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index f0fc88e5f1ad19eef29ef68175ab8e51e87522ac..26d62ff51a64e951b96aa90d1620365f15c7a1a1 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -89,6 +89,7 @@ core-$(CONFIG_SH_FPU_EMU)	+= arch/sh/math-emu/
 machdir-$(CONFIG_SH_SOLUTION_ENGINE)		:= se/770x
 machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE)	:= se/7751
 machdir-$(CONFIG_SH_7300_SOLUTION_ENGINE)	:= se/7300
+machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE)	:= se/7343
 machdir-$(CONFIG_SH_73180_SOLUTION_ENGINE)	:= se/73180
 machdir-$(CONFIG_SH_HP6XX)			:= hp6xx
 machdir-$(CONFIG_SH_EC3104)			:= ec3104
diff --git a/arch/sh/boards/se/7343/Makefile b/arch/sh/boards/se/7343/Makefile
new file mode 100644
index 0000000000000000000000000000000000000000..4291069c0b4f79e3304cb69cb4212b9c45c51228
--- /dev/null
+++ b/arch/sh/boards/se/7343/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the 7343 SolutionEngine specific parts of the kernel
+#
+
+obj-y	 := setup.o io.o irq.o
+
+obj-$(CONFIG_HEARTBEAT) += led.o
diff --git a/arch/sh/boards/se/7343/io.c b/arch/sh/boards/se/7343/io.c
new file mode 100644
index 0000000000000000000000000000000000000000..646661a146ad38ad6c55a14c8258fe07552dbc1e
--- /dev/null
+++ b/arch/sh/boards/se/7343/io.c
@@ -0,0 +1,275 @@
+/*
+ * arch/sh/boards/se/7343/io.c
+ *
+ * I/O routine for SH-Mobile3AS 7343 SolutionEngine.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <asm/io.h>
+#include <asm/mach/se7343.h>
+
+#define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a)
+
+struct iop {
+	unsigned long start, end;
+	unsigned long base;
+	struct iop *(*check) (struct iop * p, unsigned long port);
+	unsigned char (*inb) (struct iop * p, unsigned long port);
+	unsigned short (*inw) (struct iop * p, unsigned long port);
+	void (*outb) (struct iop * p, unsigned char value, unsigned long port);
+	void (*outw) (struct iop * p, unsigned short value, unsigned long port);
+};
+
+struct iop *
+simple_check(struct iop *p, unsigned long port)
+{
+	static int count;
+
+	if (count < 100)
+		count++;
+
+	port &= 0xFFFF;
+
+	if ((p->start <= port) && (port <= p->end))
+		return p;
+	else
+		badio(check, port);
+}
+
+struct iop *
+ide_check(struct iop *p, unsigned long port)
+{
+	if (((0x1f0 <= port) && (port <= 0x1f7)) || (port == 0x3f7))
+		return p;
+	return NULL;
+}
+
+unsigned char
+simple_inb(struct iop *p, unsigned long port)
+{
+	return *(unsigned char *) (p->base + port);
+}
+
+unsigned short
+simple_inw(struct iop *p, unsigned long port)
+{
+	return *(unsigned short *) (p->base + port);
+}
+
+void
+simple_outb(struct iop *p, unsigned char value, unsigned long port)
+{
+	*(unsigned char *) (p->base + port) = value;
+}
+
+void
+simple_outw(struct iop *p, unsigned short value, unsigned long port)
+{
+	*(unsigned short *) (p->base + port) = value;
+}
+
+unsigned char
+pcc_inb(struct iop *p, unsigned long port)
+{
+	unsigned long addr = p->base + port + 0x40000;
+	unsigned long v;
+
+	if (port & 1)
+		addr += 0x00400000;
+	v = *(volatile unsigned char *) addr;
+	return v;
+}
+
+void
+pcc_outb(struct iop *p, unsigned char value, unsigned long port)
+{
+	unsigned long addr = p->base + port + 0x40000;
+
+	if (port & 1)
+		addr += 0x00400000;
+	*(volatile unsigned char *) addr = value;
+}
+
+unsigned char
+bad_inb(struct iop *p, unsigned long port)
+{
+	badio(inb, port);
+}
+
+void
+bad_outb(struct iop *p, unsigned char value, unsigned long port)
+{
+	badio(inw, port);
+}
+
+#ifdef CONFIG_SMC91X
+/* MSTLANEX01 LAN at 0xb400:0000 */
+static struct iop laniop = {
+	.start = 0x00,
+	.end = 0x0F,
+	.base = 0x04000000,
+	.check = simple_check,
+	.inb = simple_inb,
+	.inw = simple_inw,
+	.outb = simple_outb,
+	.outw = simple_outw,
+};
+#endif
+
+#ifdef CONFIG_NE2000
+/* NE2000 pc card NIC */
+static struct iop neiop = {
+	.start = 0x280,
+	.end = 0x29f,
+	.base = 0xb0600000 + 0x80,	/* soft 0x280 -> hard 0x300 */
+	.check = simple_check,
+	.inb = pcc_inb,
+	.inw = simple_inw,
+	.outb = pcc_outb,
+	.outw = simple_outw,
+};
+#endif
+
+#ifdef CONFIG_IDE
+/* CF in CF slot */
+static struct iop cfiop = {
+	.base = 0xb0600000,
+	.check = ide_check,
+	.inb = pcc_inb,
+	.inw = simple_inw,
+	.outb = pcc_outb,
+	.outw = simple_outw,
+};
+#endif
+
+static __inline__ struct iop *
+port2iop(unsigned long port)
+{
+	if (0) ;
+#if defined(CONFIG_SMC91X)
+	else if (laniop.check(&laniop, port))
+		return &laniop;
+#endif
+#if defined(CONFIG_NE2000)
+	else if (neiop.check(&neiop, port))
+		return &neiop;
+#endif
+#if defined(CONFIG_IDE)
+	else if (cfiop.check(&cfiop, port))
+		return &cfiop;
+#endif
+	else
+		return NULL;
+}
+
+static inline void
+delay(void)
+{
+	ctrl_inw(0xac000000);
+	ctrl_inw(0xac000000);
+}
+
+unsigned char
+sh7343se_inb(unsigned long port)
+{
+	struct iop *p = port2iop(port);
+	return (p->inb) (p, port);
+}
+
+unsigned char
+sh7343se_inb_p(unsigned long port)
+{
+	unsigned char v = sh7343se_inb(port);
+	delay();
+	return v;
+}
+
+unsigned short
+sh7343se_inw(unsigned long port)
+{
+	struct iop *p = port2iop(port);
+	return (p->inw) (p, port);
+}
+
+unsigned int
+sh7343se_inl(unsigned long port)
+{
+	badio(inl, port);
+}
+
+void
+sh7343se_outb(unsigned char value, unsigned long port)
+{
+	struct iop *p = port2iop(port);
+	(p->outb) (p, value, port);
+}
+
+void
+sh7343se_outb_p(unsigned char value, unsigned long port)
+{
+	sh7343se_outb(value, port);
+	delay();
+}
+
+void
+sh7343se_outw(unsigned short value, unsigned long port)
+{
+	struct iop *p = port2iop(port);
+	(p->outw) (p, value, port);
+}
+
+void
+sh7343se_outl(unsigned int value, unsigned long port)
+{
+	badio(outl, port);
+}
+
+void
+sh7343se_insb(unsigned long port, void *addr, unsigned long count)
+{
+	unsigned char *a = addr;
+	struct iop *p = port2iop(port);
+	while (count--)
+		*a++ = (p->inb) (p, port);
+}
+
+void
+sh7343se_insw(unsigned long port, void *addr, unsigned long count)
+{
+	unsigned short *a = addr;
+	struct iop *p = port2iop(port);
+	while (count--)
+		*a++ = (p->inw) (p, port);
+}
+
+void
+sh7343se_insl(unsigned long port, void *addr, unsigned long count)
+{
+	badio(insl, port);
+}
+
+void
+sh7343se_outsb(unsigned long port, const void *addr, unsigned long count)
+{
+	unsigned char *a = (unsigned char *) addr;
+	struct iop *p = port2iop(port);
+	while (count--)
+		(p->outb) (p, *a++, port);
+}
+
+void
+sh7343se_outsw(unsigned long port, const void *addr, unsigned long count)
+{
+	unsigned short *a = (unsigned short *) addr;
+	struct iop *p = port2iop(port);
+	while (count--)
+		(p->outw) (p, *a++, port);
+}
+
+void
+sh7343se_outsl(unsigned long port, const void *addr, unsigned long count)
+{
+	badio(outsw, port);
+}
diff --git a/arch/sh/boards/se/7343/irq.c b/arch/sh/boards/se/7343/irq.c
new file mode 100644
index 0000000000000000000000000000000000000000..b41e3d4ea37c41af4a5f03e74f11522d5e5a8f83
--- /dev/null
+++ b/arch/sh/boards/se/7343/irq.c
@@ -0,0 +1,193 @@
+/*
+ * arch/sh/boards/se/7343/irq.c
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/mach/se7343.h>
+
+static void
+disable_intreq_irq(unsigned int irq)
+{
+	int bit = irq - OFFCHIP_IRQ_BASE;
+	u16 val;
+
+	val = ctrl_inw(PA_CPLD_IMSK);
+	val |= 1 << bit;
+	ctrl_outw(val, PA_CPLD_IMSK);
+}
+
+static void
+enable_intreq_irq(unsigned int irq)
+{
+	int bit = irq - OFFCHIP_IRQ_BASE;
+	u16 val;
+
+	val = ctrl_inw(PA_CPLD_IMSK);
+	val &= ~(1 << bit);
+	ctrl_outw(val, PA_CPLD_IMSK);
+}
+
+static void
+mask_and_ack_intreq_irq(unsigned int irq)
+{
+	disable_intreq_irq(irq);
+}
+
+static unsigned int
+startup_intreq_irq(unsigned int irq)
+{
+	enable_intreq_irq(irq);
+	return 0;
+}
+
+static void
+shutdown_intreq_irq(unsigned int irq)
+{
+	disable_intreq_irq(irq);
+}
+
+static void
+end_intreq_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+		enable_intreq_irq(irq);
+}
+
+static struct hw_interrupt_type intreq_irq_type = {
+	.typename = "FPGA-IRQ",
+	.startup = startup_intreq_irq,
+	.shutdown = shutdown_intreq_irq,
+	.enable = enable_intreq_irq,
+	.disable = disable_intreq_irq,
+	.ack = mask_and_ack_intreq_irq,
+	.end = end_intreq_irq
+};
+
+static void
+make_intreq_irq(unsigned int irq)
+{
+	disable_irq_nosync(irq);
+	irq_desc[irq].handler = &intreq_irq_type;
+	disable_intreq_irq(irq);
+}
+
+int
+shmse_irq_demux(int irq)
+{
+	int bit;
+	volatile u16 val;
+
+	if (irq == IRQ5_IRQ) {
+		/* Read status Register */
+		val = ctrl_inw(PA_CPLD_ST);
+		bit = ffs(val);
+		if (bit != 0)
+			return OFFCHIP_IRQ_BASE + bit - 1;
+	}
+	return irq;
+}
+
+/* IRQ5 is multiplexed between the following sources:
+ * 1. PC Card socket
+ * 2. Extension slot
+ * 3. USB Controller
+ * 4. Serial Controller
+ *
+ * We configure IRQ5 as a cascade IRQ.
+ */
+static struct irqaction irq5 = { no_action, 0, CPU_MASK_NONE, "IRQ5-cascade",
+				NULL, NULL};
+
+/*
+ * Initialize IRQ setting
+ */
+void __init
+init_7343se_IRQ(void)
+{
+	/* Setup Multiplexed interrupts */
+	ctrl_outw(8, PA_CPLD_MODESET);	/* Set all CPLD interrupts to active
+					 * low.
+					 */
+	/* Mask all CPLD controller interrupts */
+	ctrl_outw(0x0fff, PA_CPLD_IMSK);
+
+	/* PC Card interrupts */
+	make_intreq_irq(PC_IRQ0);
+	make_intreq_irq(PC_IRQ1);
+	make_intreq_irq(PC_IRQ2);
+	make_intreq_irq(PC_IRQ3);
+
+	/* Extension Slot Interrupts */
+	make_intreq_irq(EXT_IRQ0);
+	make_intreq_irq(EXT_IRQ1);
+	make_intreq_irq(EXT_IRQ2);
+	make_intreq_irq(EXT_IRQ3);
+
+	/* USB Controller interrupts */
+	make_intreq_irq(USB_IRQ0);
+	make_intreq_irq(USB_IRQ1);
+
+	/* Serial Controller interrupts */
+	make_intreq_irq(UART_IRQ0);
+	make_intreq_irq(UART_IRQ1);
+
+	/* Setup all external interrupts to be active low */
+	ctrl_outw(0xaaaa, INTC_ICR1);
+
+	make_ipr_irq(IRQ5_IRQ, IRQ5_IPR_ADDR+2, IRQ5_IPR_POS, IRQ5_PRIORITY);
+	setup_irq(IRQ5_IRQ, &irq5);
+	/* Set port control to use IRQ5 */
+	*(u16 *)0xA4050108 &= ~0xc;
+
+	make_ipr_irq(SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY);
+	make_ipr_irq(VPU_IRQ, VPU_IPR_ADDR, VPU_IPR_POS, 8);
+
+	ctrl_outb(0x0f, INTC_IMCR5);	/* enable SCIF IRQ */
+
+	make_ipr_irq(DMTE0_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY);
+	make_ipr_irq(DMTE1_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY);
+	make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY);
+	make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY);
+	make_ipr_irq(DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY);
+	make_ipr_irq(DMTE5_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY);
+
+	/* I2C block */
+	make_ipr_irq(IIC0_ALI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY);
+	make_ipr_irq(IIC0_TACKI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS,
+		     IIC0_PRIORITY);
+	make_ipr_irq(IIC0_WAITI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS,
+		     IIC0_PRIORITY);
+	make_ipr_irq(IIC0_DTEI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY);
+
+	make_ipr_irq(IIC1_ALI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY);
+	make_ipr_irq(IIC1_TACKI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS,
+		     IIC1_PRIORITY);
+	make_ipr_irq(IIC1_WAITI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS,
+		     IIC1_PRIORITY);
+	make_ipr_irq(IIC1_DTEI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY);
+
+	/* SIOF */
+	make_ipr_irq(SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY);
+
+	/* SIU */
+	make_ipr_irq(SIU_IRQ, SIU_IPR_ADDR, SIU_IPR_POS, SIU_PRIORITY);
+
+	/* VIO interrupt */
+	make_ipr_irq(CEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY);
+	make_ipr_irq(BEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY);
+	make_ipr_irq(VEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY);
+
+	/*MFI interrupt*/
+
+	make_ipr_irq(MFI_IRQ, MFI_IPR_ADDR, MFI_IPR_POS, MFI_PRIORITY);
+
+	/* LCD controller */
+	make_ipr_irq(LCDC_IRQ, LCDC_IPR_ADDR, LCDC_IPR_POS, LCDC_PRIORITY);
+	ctrl_outw(0x2000, PA_MRSHPC + 0x0c);	/* mrshpc irq enable */
+}
diff --git a/arch/sh/boards/se/7343/led.c b/arch/sh/boards/se/7343/led.c
new file mode 100644
index 0000000000000000000000000000000000000000..6a439cf83e46334880b7ca27fef255c1d54fc1f4
--- /dev/null
+++ b/arch/sh/boards/se/7343/led.c
@@ -0,0 +1,46 @@
+/*
+ * arch/sh/boards/se/7343/led.c
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <asm/mach/se7343.h>
+
+/* Cycle the LED's in the clasic Knightrider/Sun pattern */
+void heartbeat_7343se(void)
+{
+	static unsigned int cnt = 0, period = 0;
+	volatile unsigned short *p = (volatile unsigned short *) PA_LED;
+	static unsigned bit = 0, up = 1;
+
+	cnt += 1;
+	if (cnt < period) {
+		return;
+	}
+
+	cnt = 0;
+
+	/* Go through the points (roughly!):
+	 * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
+	 */
+	period = 110 - ((300 << FSHIFT) / ((avenrun[0] / 5) + (3 << FSHIFT)));
+
+	if (up) {
+		if (bit == 7) {
+			bit--;
+			up = 0;
+		} else {
+			bit++;
+		}
+	} else {
+		if (bit == 0) {
+			bit++;
+			up = 1;
+		} else {
+			bit--;
+		}
+	}
+	*p = 1 << (bit + LED_SHIFT);
+
+}
diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/se/7343/setup.c
new file mode 100644
index 0000000000000000000000000000000000000000..787322291fb34d4f77e4b66ff23cba8d990cdc37
--- /dev/null
+++ b/arch/sh/boards/se/7343/setup.c
@@ -0,0 +1,84 @@
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/machvec.h>
+#include <asm/mach/se7343.h>
+#include <asm/irq.h>
+
+void heartbeat_7343se(void);
+void init_7343se_IRQ(void);
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= 0x10000000,
+		.end	= 0x1000000F,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/*
+		 * shared with other devices via externel
+		 * interrupt controller in FPGA...
+		 */
+		.start	= EXT_IRQ2,
+		.end	= EXT_IRQ2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+static struct platform_device *smc91x_platform_devices[] __initdata = {
+	&smc91x_device,
+};
+
+static int __init sh7343se_devices_setup(void)
+{
+	return platform_add_devices(smc91x_platform_devices,
+				    ARRAY_SIZE(smc91x_platform_devices));
+}
+
+static void __init sh7343se_setup(char **cmdline_p)
+{
+	device_initcall(sh7343se_devices_setup);
+}
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_7343se __initmv = {
+	.mv_name = "SolutionEngine 7343",
+	.mv_setup = sh7343se_setup,
+	.mv_nr_irqs = 108,
+	.mv_inb = sh7343se_inb,
+	.mv_inw = sh7343se_inw,
+	.mv_inl = sh7343se_inl,
+	.mv_outb = sh7343se_outb,
+	.mv_outw = sh7343se_outw,
+	.mv_outl = sh7343se_outl,
+
+	.mv_inb_p = sh7343se_inb_p,
+	.mv_inw_p = sh7343se_inw,
+	.mv_inl_p = sh7343se_inl,
+	.mv_outb_p = sh7343se_outb_p,
+	.mv_outw_p = sh7343se_outw,
+	.mv_outl_p = sh7343se_outl,
+
+	.mv_insb = sh7343se_insb,
+	.mv_insw = sh7343se_insw,
+	.mv_insl = sh7343se_insl,
+	.mv_outsb = sh7343se_outsb,
+	.mv_outsw = sh7343se_outsw,
+	.mv_outsl = sh7343se_outsl,
+
+	.mv_init_irq = init_7343se_IRQ,
+	.mv_irq_demux = shmse_irq_demux,
+#ifdef CONFIG_HEARTBEAT
+	.mv_heartbeat = heartbeat_7343se,
+#endif
+};
+ALIAS_MV(7343se)
diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig
new file mode 100644
index 0000000000000000000000000000000000000000..948e507b52beeb596b0d7c0b743d8db34d09769e
--- /dev/null
+++ b/arch/sh/configs/se7343_defconfig
@@ -0,0 +1,997 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.17
+# Mon Aug  7 20:14:44 2006
+#
+CONFIG_SUPERH=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SHMEM is not set
+CONFIG_SLAB=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# System type
+#
+CONFIG_SOLUTION_ENGINE=y
+# CONFIG_SH_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SOLUTION_ENGINE is not set
+# CONFIG_SH_7300_SOLUTION_ENGINE is not set
+CONFIG_SH_7343_SOLUTION_ENGINE=y
+# CONFIG_SH_73180_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_HP6XX is not set
+# CONFIG_SH_EC3104 is not set
+# CONFIG_SH_SATURN is not set
+# CONFIG_SH_DREAMCAST is not set
+# CONFIG_SH_BIGSUR is not set
+# CONFIG_SH_MPC1211 is not set
+# CONFIG_SH_SH03 is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_HS7751RVOIP is not set
+# CONFIG_SH_7710VOIPGW is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_R7780RP is not set
+# CONFIG_SH_EDOSK7705 is not set
+# CONFIG_SH_SH4202_MICRODEV is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_SHMIN is not set
+# CONFIG_SH_UNKNOWN is not set
+
+#
+# Processor selection
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+
+#
+# SH-2 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7604 is not set
+
+#
+# SH-3 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+
+#
+# SH-4 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+
+#
+# ST40 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
+# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+
+#
+# SH-4A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+CONFIG_CPU_SUBTYPE_SH7343=y
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+
+#
+# Memory management options
+#
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x01000000
+CONFIG_32BIT=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+# CONFIG_SH_WRITETHROUGH is not set
+# CONFIG_SH_OCRAM is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_SH_FPU is not set
+# CONFIG_SH_FPU_EMU is not set
+CONFIG_SH_DSP=y
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+
+#
+# Timer support
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_PCLK_FREQ=27000000
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+# CONFIG_HD6446X_SERIES is not set
+CONFIG_HEARTBEAT=y
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_KEXEC is not set
+# CONFIG_SMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_UBC_WAKEUP is not set
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Bus options
+#
+# CONFIG_PCI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_SOLUTIONENGINE is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_STNIC is not set
+CONFIG_SMC91X=y
+# CONFIG_NE2000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=2
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+CONFIG_I2C_SH7343=y
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=y
+
+#
+# Video Capture Adapters
+#
+
+#
+# Video Capture Adapters
+#
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+
+#
+# Encoders and Decoders
+#
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_CX25840 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_MAESTRO is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_EPSON1355 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+# CONFIG_SND_MIXER_OSS is not set
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# SuperH devices
+#
+CONFIG_SH7343_SIU=m
+CONFIG_AK4537_CODEC=y
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_TCP is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index 06df309f1a6df3075933d9ca68706e7300a162d6..ac57638977ee639f332b541a9b2624a233a81d6d 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -8,6 +8,7 @@
 SE			SH_SOLUTION_ENGINE
 7751SE			SH_7751_SOLUTION_ENGINE		
 7300SE			SH_7300_SOLUTION_ENGINE
+7343SE			SH_7343_SOLUTION_ENGINE
 73180SE			SH_73180_SOLUTION_ENGINE
 7751SYSTEMH		SH_7751_SYSTEMH
 HP6XX			SH_HP6XX
diff --git a/include/asm-sh/irq.h b/include/asm-sh/irq.h
index 00886f9adb4d6723c6a696f7fadba1693d2c8b03..dd05e102fc0ed0fd81e12e477bbfae8400a47765 100644
--- a/include/asm-sh/irq.h
+++ b/include/asm-sh/irq.h
@@ -316,6 +316,8 @@
 # define OFFCHIP_NR_IRQS 4
 #elif defined(CONFIG_SH_R7780RP)
 # define OFFCHIP_NR_IRQS 16
+#elif defined(CONFIG_SH_7343_SOLUTION_ENGINE)
+# define OFFCHIP_NR_IRQS 12
 #elif defined(CONFIG_SH_UNKNOWN)
 # define OFFCHIP_NR_IRQS 16	/* Must also be last */
 #else
diff --git a/include/asm-sh/se7343.h b/include/asm-sh/se7343.h
new file mode 100644
index 0000000000000000000000000000000000000000..e7914a54aa96f285b30d1882b9e93f128ac85f96
--- /dev/null
+++ b/include/asm-sh/se7343.h
@@ -0,0 +1,82 @@
+#ifndef __ASM_SH_HITACHI_SE7343_H
+#define __ASM_SH_HITACHI_SE7343_H
+
+/*
+ * include/asm-sh/se/se7343.h
+ *
+ * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
+ *
+ * SH-Mobile SolutionEngine 7343 support
+ */
+
+/* Box specific addresses.  */
+
+/* Area 0 */
+#define PA_ROM		0x00000000	/* EPROM */
+#define PA_ROM_SIZE	0x00400000	/* EPROM size 4M byte(Actually 2MB) */
+#define PA_FROM		0x00400000	/* Flash ROM */
+#define PA_FROM_SIZE	0x00400000	/* Flash size 4M byte */
+#define PA_SRAM		0x00800000	/* SRAM */
+#define PA_FROM_SIZE	0x00400000	/* SRAM size 4M byte */
+/* Area 1 */
+#define PA_EXT1		0x04000000
+#define PA_EXT1_SIZE	0x04000000
+/* Area 2 */
+#define PA_EXT2		0x08000000
+#define PA_EXT2_SIZE	0x04000000
+/* Area 3 */
+#define PA_SDRAM	0x0c000000
+#define PA_SDRAM_SIZE	0x04000000
+/* Area 4 */
+#define PA_PCIC		0x10000000	/* MR-SHPC-01 PCMCIA */
+#define PA_MRSHPC       0xb03fffe0      /* MR-SHPC-01 PCMCIA controller */
+#define PA_MRSHPC_MW1   0xb0400000      /* MR-SHPC-01 memory window base */
+#define PA_MRSHPC_MW2   0xb0500000      /* MR-SHPC-01 attribute window base */
+#define PA_MRSHPC_IO    0xb0600000      /* MR-SHPC-01 I/O window base */
+#define MRSHPC_OPTION   (PA_MRSHPC + 6)
+#define MRSHPC_CSR      (PA_MRSHPC + 8)
+#define MRSHPC_ISR      (PA_MRSHPC + 10)
+#define MRSHPC_ICR      (PA_MRSHPC + 12)
+#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
+#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
+#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
+#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
+#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
+#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
+#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
+#define MRSHPC_CDCR     (PA_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
+#define PA_LED		0xb0C00000	/* LED */
+#define LED_SHIFT       0
+#define PA_DIPSW	0xb0900000	/* Dip switch 31 */
+#define PA_CPLD_MODESET	0xb1400004	/* CPLD Mode set register */
+#define PA_CPLD_ST	0xb1400008	/* CPLD Interrupt status register */
+#define PA_CPLD_IMSK	0xb140000a	/* CPLD Interrupt mask register */
+/* Area 5 */
+#define PA_EXT5		0x14000000
+#define PA_EXT5_SIZE	0x04000000
+/* Area 6 */
+#define PA_LCD1		0xb8000000
+#define PA_LCD2		0xb8800000
+
+#define __IO_PREFIX	sh7343se
+#include <asm/io_generic.h>
+
+/* External Multiplexed interrupts */
+#define PC_IRQ0		OFFCHIP_IRQ_BASE
+#define PC_IRQ1		(PC_IRQ0 + 1)
+#define PC_IRQ2		(PC_IRQ1 + 1)
+#define PC_IRQ3		(PC_IRQ2 + 1)
+
+#define EXT_IRQ0	(PC_IRQ3 + 1)
+#define EXT_IRQ1	(EXT_IRQ0 + 1)
+#define EXT_IRQ2	(EXT_IRQ1 + 1)
+#define EXT_IRQ3	(EXT_IRQ2 + 1)
+
+#define USB_IRQ0	(EXT_IRQ3 + 1)
+#define USB_IRQ1	(USB_IRQ0 + 1)
+
+#define UART_IRQ0	(USB_IRQ1 + 1)
+#define UART_IRQ1	(UART_IRQ0 + 1)
+
+#endif  /* __ASM_SH_HITACHI_SE7343_H */