x86/fpu: Get rid of CONFIG_AS_FXSAVEQ

This was a "workaround" to probe for binutils which could generate
FXSAVEQ, apparently gas with min version 2.16. In the meantime, minimal
required gas version is 2.20 so all those workarounds for older binutils
can be dropped.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Acked-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20190117232408.GH5023@zn.tnic

arch/x86/Makefile

@@ -187,7 +187,6 @@ cfi-sigframe := $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,
 cfi-sections := $(call as-instr,.cfi_sections .debug_frame,-DCONFIG_AS_CFI_SECTIONS=1)
 
 # does binutils support specific instructions?
-asinstr := $(call as-instr,fxsaveq (%rax),-DCONFIG_AS_FXSAVEQ=1)
 asinstr += $(call as-instr,pshufb %xmm0$(comma)%xmm0,-DCONFIG_AS_SSSE3=1)
 avx_instr := $(call as-instr,vxorps %ymm0$(comma)%ymm1$(comma)%ymm2,-DCONFIG_AS_AVX=1)
 avx2_instr :=$(call as-instr,vpbroadcastb %xmm0$(comma)%ymm1,-DCONFIG_AS_AVX2=1)

arch/x86/include/asm/fpu/internal.h

@@ -137,37 +137,25 @@ static inline int copy_fxregs_to_user(struct fxregs_state __user *fx)
 {
 	if (IS_ENABLED(CONFIG_X86_32))
 		return user_insn(fxsave %[fx], [fx] "=m" (*fx), "m" (*fx));
-	else if (IS_ENABLED(CONFIG_AS_FXSAVEQ))
+	else
 		return user_insn(fxsaveq %[fx], [fx] "=m" (*fx), "m" (*fx));
 
-	/* See comment in copy_fxregs_to_kernel() below. */
-	return user_insn(rex64/fxsave (%[fx]), "=m" (*fx), [fx] "R" (fx));
 }
 
 static inline void copy_kernel_to_fxregs(struct fxregs_state *fx)
 {
-	if (IS_ENABLED(CONFIG_X86_32)) {
+	if (IS_ENABLED(CONFIG_X86_32))
 		kernel_insn(fxrstor %[fx], "=m" (*fx), [fx] "m" (*fx));
-	} else {
-		if (IS_ENABLED(CONFIG_AS_FXSAVEQ)) {
+	else
 		kernel_insn(fxrstorq %[fx], "=m" (*fx), [fx] "m" (*fx));
-		} else {
-			/* See comment in copy_fxregs_to_kernel() below. */
-			kernel_insn(rex64/fxrstor (%[fx]), "=m" (*fx), [fx] "R" (fx), "m" (*fx));
-		}
-	}
 }
 
 static inline int copy_user_to_fxregs(struct fxregs_state __user *fx)
 {
 	if (IS_ENABLED(CONFIG_X86_32))
 		return user_insn(fxrstor %[fx], "=m" (*fx), [fx] "m" (*fx));
-	else if (IS_ENABLED(CONFIG_AS_FXSAVEQ))
+	else
 		return user_insn(fxrstorq %[fx], "=m" (*fx), [fx] "m" (*fx));
-
-	/* See comment in copy_fxregs_to_kernel() below. */
-	return user_insn(rex64/fxrstor (%[fx]), "=m" (*fx), [fx] "R" (fx),
-			  "m" (*fx));
 }
 
 static inline void copy_kernel_to_fregs(struct fregs_state *fx)
@@ -184,34 +172,8 @@ static inline void copy_fxregs_to_kernel(struct fpu *fpu)
 {
 	if (IS_ENABLED(CONFIG_X86_32))
 		asm volatile( "fxsave %[fx]" : [fx] "=m" (fpu->state.fxsave));
-	else if (IS_ENABLED(CONFIG_AS_FXSAVEQ))
+	else
 		asm volatile("fxsaveq %[fx]" : [fx] "=m" (fpu->state.fxsave));
-	else {
-		/* Using "rex64; fxsave %0" is broken because, if the memory
-		 * operand uses any extended registers for addressing, a second
-		 * REX prefix will be generated (to the assembler, rex64
-		 * followed by semicolon is a separate instruction), and hence
-		 * the 64-bitness is lost.
-		 *
-		 * Using "fxsaveq %0" would be the ideal choice, but is only
-		 * supported starting with gas 2.16.
-		 *
-		 * Using, as a workaround, the properly prefixed form below
-		 * isn't accepted by any binutils version so far released,
-		 * complaining that the same type of prefix is used twice if
-		 * an extended register is needed for addressing (fix submitted
-		 * to mainline 2005-11-21).
-		 *
-		 *  asm volatile("rex64/fxsave %0" : "=m" (fpu->state.fxsave));
-		 *
-		 * This, however, we can work around by forcing the compiler to
-		 * select an addressing mode that doesn't require extended
-		 * registers.
-		 */
-		asm volatile( "rex64/fxsave (%[fx])"
-			     : "=m" (fpu->state.fxsave)
-			     : [fx] "R" (&fpu->state.fxsave));
-	}
 }
 
 /* These macros all use (%edi)/(%rdi) as the single memory argument. */