diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c index 644962adda97306943857b0effbaad9ccfbd0608..791885262602412a6680d6980f714b516f3f229f 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.c +++ b/drivers/net/wireless/ath/ath5k/eeprom.c @@ -97,6 +97,7 @@ ath5k_eeprom_init_header(struct ath5k_hw *ah) struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; int ret; u16 val; + u32 cksum, offset; /* * Read values from EEPROM and store them in the capability structure @@ -111,7 +112,6 @@ ath5k_eeprom_init_header(struct ath5k_hw *ah) if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_0) return 0; -#ifdef notyet /* * Validate the checksum of the EEPROM date. There are some * devices with invalid EEPROMs. @@ -124,7 +124,6 @@ ath5k_eeprom_init_header(struct ath5k_hw *ah) ATH5K_ERR(ah->ah_sc, "Invalid EEPROM checksum 0x%04x\n", cksum); return -EIO; } -#endif AR5K_EEPROM_READ_HDR(AR5K_EEPROM_ANT_GAIN(ah->ah_ee_version), ee_ant_gain); diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 077480c4916a774cd47f2361f0c96b9237c8fb8b..19b4eae47b594c95a389853a0dfb7ef67943b85b 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -1784,7 +1784,10 @@ static void b43_do_interrupt_thread(struct b43_wldev *dev) dma_reason[0], dma_reason[1], dma_reason[2], dma_reason[3], dma_reason[4], dma_reason[5]); - b43_controller_restart(dev, "DMA error"); + b43err(dev->wl, "This device does not support DMA " + "on your system. Please use PIO instead.\n"); + b43err(dev->wl, "CONFIG_B43_FORCE_PIO must be set in " + "your kernel configuration.\n"); return; } if (merged_dma_reason & B43_DMAIRQ_NONFATALMASK) { diff --git a/drivers/net/wireless/rtl818x/rtl8187.h b/drivers/net/wireless/rtl818x/rtl8187.h index b1a24de0b7b01a99f2186fb0a421a36e4969aade..6af0f3f71f3a4b6f01789da274a31fdbcba00897 100644 --- a/drivers/net/wireless/rtl818x/rtl8187.h +++ b/drivers/net/wireless/rtl818x/rtl8187.h @@ -108,6 +108,7 @@ struct rtl8187_priv { struct delayed_work work; struct ieee80211_hw *dev; #ifdef CONFIG_RTL8187_LEDS + struct rtl8187_led led_radio; struct rtl8187_led led_tx; struct rtl8187_led led_rx; struct delayed_work led_on; diff --git a/drivers/net/wireless/rtl818x/rtl8187_leds.c b/drivers/net/wireless/rtl818x/rtl8187_leds.c index cf8a4a40fdf677ebb06f99a9311c25ddd96981a2..ded44c045eb24307a6377e18eec161a27247d922 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_leds.c +++ b/drivers/net/wireless/rtl818x/rtl8187_leds.c @@ -105,19 +105,36 @@ static void rtl8187_led_brightness_set(struct led_classdev *led_dev, struct rtl8187_led *led = container_of(led_dev, struct rtl8187_led, led_dev); struct ieee80211_hw *hw = led->dev; - struct rtl8187_priv *priv = hw->priv; + struct rtl8187_priv *priv; + static bool radio_on; - if (brightness == LED_OFF) { - ieee80211_queue_delayed_work(hw, &priv->led_off, 0); - /* The LED is off for 1/20 sec so that it just blinks. */ - ieee80211_queue_delayed_work(hw, &priv->led_on, HZ / 20); - } else - ieee80211_queue_delayed_work(hw, &priv->led_on, 0); + if (!hw) + return; + priv = hw->priv; + if (led->is_radio) { + if (brightness == LED_FULL) { + ieee80211_queue_delayed_work(hw, &priv->led_on, 0); + radio_on = true; + } else if (radio_on) { + radio_on = false; + cancel_delayed_work_sync(&priv->led_on); + ieee80211_queue_delayed_work(hw, &priv->led_off, 0); + } + } else if (radio_on) { + if (brightness == LED_OFF) { + ieee80211_queue_delayed_work(hw, &priv->led_off, 0); + /* The LED is off for 1/20 sec - it just blinks. */ + ieee80211_queue_delayed_work(hw, &priv->led_on, + HZ / 20); + } else + ieee80211_queue_delayed_work(hw, &priv->led_on, 0); + } } static int rtl8187_register_led(struct ieee80211_hw *dev, struct rtl8187_led *led, const char *name, - const char *default_trigger, u8 ledpin) + const char *default_trigger, u8 ledpin, + bool is_radio) { int err; struct rtl8187_priv *priv = dev->priv; @@ -128,6 +145,7 @@ static int rtl8187_register_led(struct ieee80211_hw *dev, return -EINVAL; led->dev = dev; led->ledpin = ledpin; + led->is_radio = is_radio; strncpy(led->name, name, sizeof(led->name)); led->led_dev.name = led->name; @@ -145,7 +163,11 @@ static int rtl8187_register_led(struct ieee80211_hw *dev, static void rtl8187_unregister_led(struct rtl8187_led *led) { + struct ieee80211_hw *hw = led->dev; + struct rtl8187_priv *priv = hw->priv; + led_classdev_unregister(&led->led_dev); + flush_delayed_work(&priv->led_off); led->dev = NULL; } @@ -182,34 +204,38 @@ void rtl8187_leds_init(struct ieee80211_hw *dev, u16 custid) INIT_DELAYED_WORK(&priv->led_on, led_turn_on); INIT_DELAYED_WORK(&priv->led_off, led_turn_off); + snprintf(name, sizeof(name), + "rtl8187-%s::radio", wiphy_name(dev->wiphy)); + err = rtl8187_register_led(dev, &priv->led_radio, name, + ieee80211_get_radio_led_name(dev), ledpin, true); + if (err) + return; + snprintf(name, sizeof(name), "rtl8187-%s::tx", wiphy_name(dev->wiphy)); err = rtl8187_register_led(dev, &priv->led_tx, name, - ieee80211_get_tx_led_name(dev), ledpin); + ieee80211_get_tx_led_name(dev), ledpin, false); if (err) - goto error; + goto err_tx; + snprintf(name, sizeof(name), "rtl8187-%s::rx", wiphy_name(dev->wiphy)); err = rtl8187_register_led(dev, &priv->led_rx, name, - ieee80211_get_rx_led_name(dev), ledpin); - if (!err) { - ieee80211_queue_delayed_work(dev, &priv->led_on, 0); + ieee80211_get_rx_led_name(dev), ledpin, false); + if (!err) return; - } - /* registration of RX LED failed - unregister TX */ + + /* registration of RX LED failed - unregister */ rtl8187_unregister_led(&priv->led_tx); -error: - /* If registration of either failed, cancel delayed work */ - cancel_delayed_work_sync(&priv->led_off); - cancel_delayed_work_sync(&priv->led_on); +err_tx: + rtl8187_unregister_led(&priv->led_radio); } void rtl8187_leds_exit(struct ieee80211_hw *dev) { struct rtl8187_priv *priv = dev->priv; - /* turn the LED off before exiting */ - ieee80211_queue_delayed_work(dev, &priv->led_off, 0); + rtl8187_unregister_led(&priv->led_radio); rtl8187_unregister_led(&priv->led_rx); rtl8187_unregister_led(&priv->led_tx); cancel_delayed_work_sync(&priv->led_off); diff --git a/drivers/net/wireless/rtl818x/rtl8187_leds.h b/drivers/net/wireless/rtl818x/rtl8187_leds.h index a0332027aeadf1c42fbfc52e590a1531cb03cad2..efe8041bdda42af9ea74e240171b83580f140aaf 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_leds.h +++ b/drivers/net/wireless/rtl818x/rtl8187_leds.h @@ -47,6 +47,8 @@ struct rtl8187_led { u8 ledpin; /* The unique name string for this LED device. */ char name[RTL8187_LED_MAX_NAME_LEN + 1]; + /* If the LED is radio or tx/rx */ + bool is_radio; }; void rtl8187_leds_init(struct ieee80211_hw *dev, u16 code); diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 93ee1fd5c08dd6674152072e9045c48cb0863663..6dc3579c0ac5444a0d8811504aefd6c620c9d1f1 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -354,7 +354,8 @@ static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo) sinfo->rx_packets = sta->rx_packets; sinfo->tx_packets = sta->tx_packets; - if (sta->local->hw.flags & IEEE80211_HW_SIGNAL_DBM) { + if ((sta->local->hw.flags & IEEE80211_HW_SIGNAL_DBM) || + (sta->local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC)) { sinfo->filled |= STATION_INFO_SIGNAL; sinfo->signal = (s8)sta->last_signal; } diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index c0fe46493f71cbcd70552baef75d34c85225de28..6a43314295988c76067017be5d19de785e404d54 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -427,7 +427,7 @@ int ieee80211_new_mesh_header(struct ieee80211s_hdr *meshhdr, char *addr5, char *addr6) { int aelen = 0; - memset(meshhdr, 0, sizeof(meshhdr)); + memset(meshhdr, 0, sizeof(*meshhdr)); meshhdr->ttl = sdata->u.mesh.mshcfg.dot11MeshTTL; put_unaligned(cpu_to_le32(sdata->u.mesh.mesh_seqnum), &meshhdr->seqnum); sdata->u.mesh.mesh_seqnum++; diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index 31e102541869080729120683f69eef29d381f59e..85562c59d7d68bd656fdd1ca00f6129b8adefe8c 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -188,8 +188,9 @@ struct mesh_rmc { */ #define MESH_PREQ_MIN_INT 10 #define MESH_DIAM_TRAVERSAL_TIME 50 -/* Paths will be refreshed if they are closer than PATH_REFRESH_TIME to their - * expiration +/* A path will be refreshed if it is used PATH_REFRESH_TIME milliseconds before + * timing out. This way it will remain ACTIVE and no data frames will be + * unnecesarily held in the pending queue. */ #define MESH_PATH_REFRESH_TIME 1000 #define MESH_MIN_DISCOVERY_TIMEOUT (2 * MESH_DIAM_TRAVERSAL_TIME) diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index 833b2f3670c59ff83c7d3517630706217472f4ee..d28acb6b1f8151e2a822ec5fc697231b5d76e698 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -937,7 +937,7 @@ int mesh_nexthop_lookup(struct sk_buff *skb, if (mpath->flags & MESH_PATH_ACTIVE) { if (time_after(jiffies, - mpath->exp_time + + mpath->exp_time - msecs_to_jiffies(sdata->u.mesh.mshcfg.path_refresh_time)) && !memcmp(sdata->dev->dev_addr, hdr->addr4, ETH_ALEN) && !(mpath->flags & MESH_PATH_RESOLVING) && diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index f237df408378c514e567676eb2272f659f8b3067..9f2807aeaf52d6a7c3ed00134051bf050c2ec5fe 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -1712,7 +1712,6 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx) mpp_path_add(proxied_addr, mpp_addr, sdata); } else { spin_lock_bh(&mppath->state_lock); - mppath->exp_time = jiffies; if (compare_ether_addr(mppath->mpp, mpp_addr) != 0) memcpy(mppath->mpp, mpp_addr, ETH_ALEN); spin_unlock_bh(&mppath->state_lock); diff --git a/net/wireless/reg.c b/net/wireless/reg.c index c01470e7de15a627c3baf0094dfdd5220c56684a..baa898add28760d8c13642c47cdb1f1c4a49c0c5 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -141,62 +141,35 @@ static const struct ieee80211_regdomain us_regdom = { .reg_rules = { /* IEEE 802.11b/g, channels 1..11 */ REG_RULE(2412-10, 2462+10, 40, 6, 27, 0), - /* IEEE 802.11a, channel 36 */ - REG_RULE(5180-10, 5180+10, 40, 6, 23, 0), - /* IEEE 802.11a, channel 40 */ - REG_RULE(5200-10, 5200+10, 40, 6, 23, 0), - /* IEEE 802.11a, channel 44 */ - REG_RULE(5220-10, 5220+10, 40, 6, 23, 0), + /* IEEE 802.11a, channel 36..48 */ + REG_RULE(5180-10, 5240+10, 40, 6, 17, 0), /* IEEE 802.11a, channels 48..64 */ - REG_RULE(5240-10, 5320+10, 40, 6, 23, 0), + REG_RULE(5260-10, 5320+10, 40, 6, 20, NL80211_RRF_DFS), + /* IEEE 802.11a, channels 100..124 */ + REG_RULE(5500-10, 5590+10, 40, 6, 20, NL80211_RRF_DFS), + /* IEEE 802.11a, channels 132..144 */ + REG_RULE(5660-10, 5700+10, 40, 6, 20, NL80211_RRF_DFS), /* IEEE 802.11a, channels 149..165, outdoor */ REG_RULE(5745-10, 5825+10, 40, 6, 30, 0), } }; static const struct ieee80211_regdomain jp_regdom = { - .n_reg_rules = 3, + .n_reg_rules = 6, .alpha2 = "JP", .reg_rules = { - /* IEEE 802.11b/g, channels 1..14 */ - REG_RULE(2412-10, 2484+10, 40, 6, 20, 0), - /* IEEE 802.11a, channels 34..48 */ - REG_RULE(5170-10, 5240+10, 40, 6, 20, - NL80211_RRF_PASSIVE_SCAN), + /* IEEE 802.11b/g, channels 1..11 */ + REG_RULE(2412-10, 2462+10, 40, 6, 20, 0), + /* IEEE 802.11b/g, channels 12..13 */ + REG_RULE(2467-10, 2472+10, 20, 6, 20, 0), + /* IEEE 802.11b/g, channel 14 */ + REG_RULE(2484-10, 2484+10, 20, 6, 20, NL80211_RRF_NO_OFDM), + /* IEEE 802.11a, channels 36..48 */ + REG_RULE(5180-10, 5240+10, 40, 6, 20, 0), /* IEEE 802.11a, channels 52..64 */ - REG_RULE(5260-10, 5320+10, 40, 6, 20, - NL80211_RRF_NO_IBSS | - NL80211_RRF_DFS), - } -}; - -static const struct ieee80211_regdomain eu_regdom = { - .n_reg_rules = 6, - /* - * This alpha2 is bogus, we leave it here just for stupid - * backward compatibility - */ - .alpha2 = "EU", - .reg_rules = { - /* IEEE 802.11b/g, channels 1..13 */ - REG_RULE(2412-10, 2472+10, 40, 6, 20, 0), - /* IEEE 802.11a, channel 36 */ - REG_RULE(5180-10, 5180+10, 40, 6, 23, - NL80211_RRF_PASSIVE_SCAN), - /* IEEE 802.11a, channel 40 */ - REG_RULE(5200-10, 5200+10, 40, 6, 23, - NL80211_RRF_PASSIVE_SCAN), - /* IEEE 802.11a, channel 44 */ - REG_RULE(5220-10, 5220+10, 40, 6, 23, - NL80211_RRF_PASSIVE_SCAN), - /* IEEE 802.11a, channels 48..64 */ - REG_RULE(5240-10, 5320+10, 40, 6, 20, - NL80211_RRF_NO_IBSS | - NL80211_RRF_DFS), - /* IEEE 802.11a, channels 100..140 */ - REG_RULE(5500-10, 5700+10, 40, 6, 30, - NL80211_RRF_NO_IBSS | - NL80211_RRF_DFS), + REG_RULE(5260-10, 5320+10, 40, 6, 20, NL80211_RRF_DFS), + /* IEEE 802.11a, channels 100..144 */ + REG_RULE(5500-10, 5700+10, 40, 6, 23, NL80211_RRF_DFS), } }; @@ -206,15 +179,17 @@ static const struct ieee80211_regdomain *static_regdom(char *alpha2) return &us_regdom; if (alpha2[0] == 'J' && alpha2[1] == 'P') return &jp_regdom; + /* Use world roaming rules for "EU", since it was a pseudo + domain anyway... */ if (alpha2[0] == 'E' && alpha2[1] == 'U') - return &eu_regdom; - /* Default, as per the old rules */ - return &us_regdom; + return &world_regdom; + /* Default, world roaming rules */ + return &world_regdom; } static bool is_old_static_regdom(const struct ieee80211_regdomain *rd) { - if (rd == &us_regdom || rd == &jp_regdom || rd == &eu_regdom) + if (rd == &us_regdom || rd == &jp_regdom || rd == &world_regdom) return true; return false; } diff --git a/net/wireless/wext-compat.c b/net/wireless/wext-compat.c index 584eb4826e02540973297e975e214bd4553bcd9f..54face3d4424c973ab6b297ea9582daba6c0beab 100644 --- a/net/wireless/wext-compat.c +++ b/net/wireless/wext-compat.c @@ -479,6 +479,7 @@ static int __cfg80211_set_encryption(struct cfg80211_registered_device *rdev, } err = rdev->ops->del_key(&rdev->wiphy, dev, idx, addr); } + wdev->wext.connect.privacy = false; /* * Applications using wireless extensions expect to be * able to delete keys that don't exist, so allow that.