提交 ba04c289 编写于 作者: S Stephen Warren

ARM: dt: tegra: consistenly use lower-case for hex constants

Signed-off-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NOlof Johansson <olof@lixom.net>
上级 5ff48887
......@@ -249,7 +249,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "nvidia,nvec";
reg = <0x7000C500 0x100>;
reg = <0x7000c500 0x100>;
interrupts = <0 92 0x04>;
clock-frequency = <80000>;
request-gpios = <&gpio 170 0>; /* gpio PV2 */
......
......@@ -48,7 +48,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "nvidia,tegra20-i2c";
reg = <0x7000C000 0x100>;
reg = <0x7000c000 0x100>;
interrupts = <0 38 0x04>;
};
......@@ -56,7 +56,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "nvidia,tegra20-i2c";
reg = <0x7000C400 0x100>;
reg = <0x7000c400 0x100>;
interrupts = <0 84 0x04>;
};
......@@ -64,7 +64,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "nvidia,tegra20-i2c";
reg = <0x7000C500 0x100>;
reg = <0x7000c500 0x100>;
interrupts = <0 92 0x04>;
};
......@@ -72,7 +72,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "nvidia,tegra20-i2c-dvc";
reg = <0x7000D000 0x200>;
reg = <0x7000d000 0x200>;
interrupts = <0 53 0x04>;
};
......
......@@ -66,7 +66,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
reg = <0x7000C000 0x100>;
reg = <0x7000c000 0x100>;
interrupts = <0 38 0x04>;
};
......@@ -74,7 +74,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
reg = <0x7000C400 0x100>;
reg = <0x7000c400 0x100>;
interrupts = <0 84 0x04>;
};
......@@ -82,7 +82,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
reg = <0x7000C500 0x100>;
reg = <0x7000c500 0x100>;
interrupts = <0 92 0x04>;
};
......@@ -98,7 +98,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
reg = <0x7000D000 0x100>;
reg = <0x7000d000 0x100>;
interrupts = <0 53 0x04>;
};
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册