提交 b94d525e 编写于 作者: L Linus Torvalds

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking fixes from David Miller:
 "Here is a quick pull request primarily meant to address the deconfig
  fallout from changing SCSI_NETLINK from being used via 'select' to
  being used via 'depends'.

  I applied a set of 5 patches written by Michal Marek, and then I
  carefully audited all of the remaining config files, basically:

   1) I scanned every arch config file, and if it mentioned CONFIG_INET
      or CONFIG_UNIX, I made sure it had CONFIG_NET=y

   2) After that, I scanned every arch config file, and if it did not
      have CONFIG_NET=y I made sure it did not reference any networking
      config options.

  Finally, we have some late breaking wireless fixes in here from John
  Linville and co"

[ And there's a sparc bpf fix snuck in too ]

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  sparc: bpf_jit: fix loads from negative offsets
  parisc: Update defconfigs which were missing CONFIG_NET.
  powerpc: Update defconfigs which were missing CONFIG_NET.
  s390: Update defconfigs which were missing CONFIG_NET.
  mips: Update some more defconfigs which were missing CONFIG_NET.
  sparc: Set CONFIG_NET=y in defconfigs
  sh: Set CONFIG_NET=y in defconfigs
  powerpc: Set CONFIG_NET=y in defconfigs
  parisc: Set CONFIG_NET=y in defconfigs
  mips: Set CONFIG_NET=y in defconfigs
  brcmfmac: Fix off by one bug in brcmf_count_20mhz_channels()
  ath9k: Fix NULL pointer dereference on early irq
  net: rfkill: gpio: Fix clock status
  NFC: st21nfca: Fix potential depmod dependency cycle
  NFC: st21nfcb: Fix depmod dependency cycle
  NFC: microread: Potential overflows in microread_target_discovered()
......@@ -19,6 +19,7 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PCI=y
CONFIG_BINFMT_MISC=m
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
......
......@@ -28,6 +28,7 @@ CONFIG_MIPS32_COMPAT=y
CONFIG_MIPS32_O32=y
CONFIG_MIPS32_N32=y
CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=m
......
......@@ -18,6 +18,7 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_BINFMT_MISC=m
CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=m
CONFIG_UNIX=y
CONFIG_NET_KEY=m
......
......@@ -59,6 +59,7 @@ CONFIG_MIPS32_COMPAT=y
CONFIG_MIPS32_O32=y
CONFIG_MIPS32_N32=y
CONFIG_PM_RUNTIME=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=y
......
......@@ -19,6 +19,7 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_PCI=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=m
......
......@@ -20,6 +20,7 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_PCI=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=m
......
......@@ -19,6 +19,7 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_PCI=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=m
......
......@@ -27,6 +27,7 @@ CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_BINFMT_MISC=m
CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=m
CONFIG_UNIX=y
CONFIG_XFRM_USER=m
......
......@@ -63,6 +63,7 @@ CONFIG_MIPS32_O32=y
CONFIG_MIPS32_N32=y
CONFIG_PM_RUNTIME=y
CONFIG_PM_DEBUG=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=m
......
......@@ -43,6 +43,7 @@ CONFIG_PCI_DEBUG=y
CONFIG_BINFMT_MISC=m
CONFIG_PM_RUNTIME=y
CONFIG_PM_DEBUG=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=m
......
......@@ -20,6 +20,7 @@ CONFIG_MODVERSIONS=y
CONFIG_PCI=y
CONFIG_BINFMT_MISC=m
CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=m
CONFIG_UNIX=y
CONFIG_NET_KEY=m
......
......@@ -31,6 +31,7 @@ CONFIG_PD6729=m
CONFIG_I82092=m
# CONFIG_SUPERIO is not set
# CONFIG_CHASSIS_LCD_LED is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=m
......
......@@ -33,6 +33,7 @@ CONFIG_PCI_LBA=y
# CONFIG_PDC_CHASSIS_WARN is not set
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_MISC=m
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=m
......
......@@ -29,6 +29,7 @@ CONFIG_PM=y
CONFIG_PCI_MSI=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_SHPC=m
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=y
......
......@@ -31,6 +31,7 @@ CONFIG_HIBERNATION=y
CONFIG_APM_EMULATION=y
CONFIG_PCCARD=m
CONFIG_YENTA=m
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=y
......
......@@ -58,6 +58,7 @@ CONFIG_ELECTRA_CF=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_RPA=m
CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=m
......
......@@ -33,6 +33,7 @@ CONFIG_SPARSEMEM_MANUAL=y
CONFIG_PCI_MSI=y
CONFIG_PCCARD=y
CONFIG_HOTPLUG_PCI=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=m
......
......@@ -53,6 +53,7 @@ CONFIG_SCHED_SMT=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_RPA=m
CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=m
......
......@@ -55,6 +55,7 @@ CONFIG_SCHED_SMT=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_RPA=m
CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=m
......
......@@ -63,6 +63,7 @@ CONFIG_CRASH_DUMP=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_MISC=m
CONFIG_HIBERNATION=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
......
......@@ -61,6 +61,7 @@ CONFIG_CRASH_DUMP=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_MISC=m
CONFIG_HIBERNATION=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
......
......@@ -59,6 +59,7 @@ CONFIG_CRASH_DUMP=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_MISC=m
CONFIG_HIBERNATION=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
......
......@@ -23,6 +23,7 @@ CONFIG_CRASH_DUMP=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_SECCOMP is not set
# CONFIG_IUCV is not set
CONFIG_NET=y
CONFIG_ATM=y
CONFIG_ATM_LANE=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
......
......@@ -50,6 +50,7 @@ CONFIG_CMA=y
CONFIG_CRASH_DUMP=y
CONFIG_BINFMT_MISC=m
CONFIG_HIBERNATION=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
......
......@@ -30,6 +30,7 @@ CONFIG_PCI_DEBUG=y
CONFIG_PCCARD=y
CONFIG_YENTA=y
CONFIG_HOTPLUG_PCI=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
......
......@@ -25,6 +25,7 @@ CONFIG_CMDLINE_OVERWRITE=y
CONFIG_CMDLINE="console=ttySC1,115200 ip=dhcp root=/dev/nfs rw nfsroot=/nfs/rootfs,rsize=1024,wsize=1024 earlyprintk=sh-sci.1"
CONFIG_PCCARD=y
CONFIG_BINFMT_MISC=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=y
......
......@@ -29,6 +29,7 @@ CONFIG_PCI=y
CONFIG_PCI_MSI=y
CONFIG_SUN_OPENPROMFS=m
CONFIG_BINFMT_MISC=m
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=m
......
......@@ -6,10 +6,12 @@
#define SAVE_SZ 176
#define SCRATCH_OFF STACK_BIAS + 128
#define BE_PTR(label) be,pn %xcc, label
#define SIGN_EXTEND(reg) sra reg, 0, reg
#else
#define SAVE_SZ 96
#define SCRATCH_OFF 72
#define BE_PTR(label) be label
#define SIGN_EXTEND(reg)
#endif
#define SKF_MAX_NEG_OFF (-0x200000) /* SKF_LL_OFF from filter.h */
......@@ -135,6 +137,7 @@ bpf_slow_path_byte_msh:
save %sp, -SAVE_SZ, %sp; \
mov %i0, %o0; \
mov r_OFF, %o1; \
SIGN_EXTEND(%o1); \
call bpf_internal_load_pointer_neg_helper; \
mov (LEN), %o2; \
mov %o0, r_TMP; \
......
......@@ -184,7 +184,7 @@ do { \
*/
#define emit_alu_K(OPCODE, K) \
do { \
if (K) { \
if (K || OPCODE == AND || OPCODE == MUL) { \
unsigned int _insn = OPCODE; \
_insn |= RS1(r_A) | RD(r_A); \
if (is_simm13(K)) { \
......
......@@ -513,7 +513,7 @@ irqreturn_t ath_isr(int irq, void *dev)
* touch anything. Note this can happen early
* on if the IRQ is shared.
*/
if (test_bit(ATH_OP_INVALID, &common->op_flags))
if (!ah || test_bit(ATH_OP_INVALID, &common->op_flags))
return IRQ_NONE;
/* shared irq, not for us */
......
......@@ -4921,7 +4921,7 @@ static void brcmf_count_20mhz_channels(struct brcmf_cfg80211_info *cfg,
struct brcmu_chan ch;
int i;
for (i = 0; i <= total; i++) {
for (i = 0; i < total; i++) {
ch.chspec = (u16)le32_to_cpu(chlist->element[i]);
cfg->d11inf.decchspec(&ch);
......
......@@ -501,9 +501,13 @@ static void microread_target_discovered(struct nfc_hci_dev *hdev, u8 gate,
targets->sens_res =
be16_to_cpu(*(u16 *)&skb->data[MICROREAD_EMCF_A_ATQA]);
targets->sel_res = skb->data[MICROREAD_EMCF_A_SAK];
memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_A_UID],
skb->data[MICROREAD_EMCF_A_LEN]);
targets->nfcid1_len = skb->data[MICROREAD_EMCF_A_LEN];
if (targets->nfcid1_len > sizeof(targets->nfcid1)) {
r = -EINVAL;
goto exit_free;
}
memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_A_UID],
targets->nfcid1_len);
break;
case MICROREAD_GATE_ID_MREAD_ISO_A_3:
targets->supported_protocols =
......@@ -511,9 +515,13 @@ static void microread_target_discovered(struct nfc_hci_dev *hdev, u8 gate,
targets->sens_res =
be16_to_cpu(*(u16 *)&skb->data[MICROREAD_EMCF_A3_ATQA]);
targets->sel_res = skb->data[MICROREAD_EMCF_A3_SAK];
memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_A3_UID],
skb->data[MICROREAD_EMCF_A3_LEN]);
targets->nfcid1_len = skb->data[MICROREAD_EMCF_A3_LEN];
if (targets->nfcid1_len > sizeof(targets->nfcid1)) {
r = -EINVAL;
goto exit_free;
}
memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_A3_UID],
targets->nfcid1_len);
break;
case MICROREAD_GATE_ID_MREAD_ISO_B:
targets->supported_protocols = NFC_PROTO_ISO14443_B_MASK;
......
......@@ -2,7 +2,8 @@
# Makefile for ST21NFCA HCI based NFC driver
#
st21nfca_i2c-objs = i2c.o
st21nfca_hci-objs = st21nfca.o st21nfca_dep.o
obj-$(CONFIG_NFC_ST21NFCA) += st21nfca_hci.o
obj-$(CONFIG_NFC_ST21NFCA) += st21nfca.o st21nfca_dep.o
st21nfca_i2c-objs = i2c.o
obj-$(CONFIG_NFC_ST21NFCA_I2C) += st21nfca_i2c.o
......@@ -2,7 +2,8 @@
# Makefile for ST21NFCB NCI based NFC driver
#
st21nfcb_i2c-objs = i2c.o
st21nfcb_nci-objs = ndlc.o st21nfcb.o
obj-$(CONFIG_NFC_ST21NFCB) += st21nfcb_nci.o
obj-$(CONFIG_NFC_ST21NFCB) += st21nfcb.o ndlc.o
st21nfcb_i2c-objs = i2c.o
obj-$(CONFIG_NFC_ST21NFCB_I2C) += st21nfcb_i2c.o
......@@ -54,7 +54,7 @@ static int rfkill_gpio_set_power(void *data, bool blocked)
if (blocked && !IS_ERR(rfkill->clk) && rfkill->clk_enabled)
clk_disable(rfkill->clk);
rfkill->clk_enabled = blocked;
rfkill->clk_enabled = !blocked;
return 0;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册