diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 648a446758801ab6ff338d1dd9e5b5ab052df0da..9641bcb90cd28b8ab9897c6874e1e80b128341b1 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -480,6 +480,15 @@ ufshcd_config_intr_aggr(struct ufs_hba *hba, u8 cnt, u8 tmout)
 		      REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL);
 }
 
+/**
+ * ufshcd_disable_intr_aggr - Disables interrupt aggregation.
+ * @hba: per adapter instance
+ */
+static inline void ufshcd_disable_intr_aggr(struct ufs_hba *hba)
+{
+	ufshcd_writel(hba, 0, REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL);
+}
+
 /**
  * ufshcd_enable_run_stop_reg - Enable run-stop registers,
  *			When run-stop registers are set to 1, it indicates the
@@ -1326,7 +1335,7 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
 	lrbp->sense_buffer = cmd->sense_buffer;
 	lrbp->task_tag = tag;
 	lrbp->lun = ufshcd_scsi_to_upiu_lun(cmd->device->lun);
-	lrbp->intr_cmd = false;
+	lrbp->intr_cmd = !ufshcd_is_intr_aggr_allowed(hba) ? true : false;
 	lrbp->command_type = UTP_CMD_TYPE_SCSI;
 
 	/* form UPIU before issuing the command */
@@ -2522,7 +2531,10 @@ static int ufshcd_make_hba_operational(struct ufs_hba *hba)
 	ufshcd_enable_intr(hba, UFSHCD_ENABLE_INTRS);
 
 	/* Configure interrupt aggregation */
-	ufshcd_config_intr_aggr(hba, hba->nutrs - 1, INT_AGGR_DEF_TO);
+	if (ufshcd_is_intr_aggr_allowed(hba))
+		ufshcd_config_intr_aggr(hba, hba->nutrs - 1, INT_AGGR_DEF_TO);
+	else
+		ufshcd_disable_intr_aggr(hba);
 
 	/* Configure UTRL and UTMRL base address registers */
 	ufshcd_writel(hba, lower_32_bits(hba->utrdl_dma_addr),
@@ -3073,7 +3085,8 @@ static void ufshcd_transfer_req_compl(struct ufs_hba *hba)
 	 * false interrupt if device completes another request after resetting
 	 * aggregation and before reading the DB.
 	 */
-	ufshcd_reset_intr_aggr(hba);
+	if (ufshcd_is_intr_aggr_allowed(hba))
+		ufshcd_reset_intr_aggr(hba);
 
 	tr_doorbell = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL);
 	completed_reqs = tr_doorbell ^ hba->outstanding_reqs;
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index b47ff07698e80aa9119633568324e009da5217be..fc8bec9960b1dce97012f64cbcd37ceab000f9bf 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -417,11 +417,15 @@ struct ufs_hba {
 	unsigned int irq;
 	bool is_irq_enabled;
 
+	/* Interrupt aggregation support is broken */
+	#define UFSHCD_QUIRK_BROKEN_INTR_AGGR			UFS_BIT(0)
+
 	/*
 	 * delay before each dme command is required as the unipro
 	 * layer has shown instabilities
 	 */
-	#define UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS		UFS_BIT(0)
+	#define UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS		UFS_BIT(1)
+
 
 	unsigned int quirks;	/* Deviations from standard UFSHCI spec. */
 
@@ -478,6 +482,12 @@ struct ufs_hba {
 #define UFSHCD_CAP_CLK_SCALING	(1 << 2)
 	/* Allow auto bkops to enabled during runtime suspend */
 #define UFSHCD_CAP_AUTO_BKOPS_SUSPEND (1 << 3)
+	/*
+	 * This capability allows host controller driver to use the UFS HCI's
+	 * interrupt aggregation capability.
+	 * CAUTION: Enabling this might reduce overall UFS throughput.
+	 */
+#define UFSHCD_CAP_INTR_AGGR (1 << 4)
 
 	struct devfreq *devfreq;
 	struct ufs_clk_scaling clk_scaling;
@@ -502,6 +512,15 @@ static inline bool ufshcd_can_autobkops_during_suspend(struct ufs_hba *hba)
 	return hba->caps & UFSHCD_CAP_AUTO_BKOPS_SUSPEND;
 }
 
+static inline bool ufshcd_is_intr_aggr_allowed(struct ufs_hba *hba)
+{
+	if ((hba->caps & UFSHCD_CAP_INTR_AGGR) &&
+	    !(hba->quirks & UFSHCD_QUIRK_BROKEN_INTR_AGGR))
+		return true;
+	else
+		return false;
+}
+
 #define ufshcd_writel(hba, val, reg)	\
 	writel((val), (hba)->mmio_base + (reg))
 #define ufshcd_readl(hba, reg)	\