From b38cb7d2571197b56cefae8967f9db15c9361113 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 14 May 2014 15:55:03 -0300 Subject: [PATCH] serial: imx: Disable new features of autobaud detection Bit 7 of UCR3 is described in the i.MX reference manuals (with the exception of i.MX1) as follows: ADNIMP: Autobaud Detection Not Improved-. Disables new features of autobaud detection (See Baud Rate Automatic Detection Protocol, for more details). 0 Autobaud detection new features selected 1 Keep old autobaud detection mechanism The "new features" mechanism occasionally cause the receiver to get out of sync and continuously produce received characters of '\xff'. In order to reproduce the problem: $ stty -F /dev/ttymxc0 19200 - Change the terminal baudrate to 19200 - Type in the console and it should look good - Change the terminal baudrate back to 115200 - Type 'b' in the console, then a stream of garbage characters is seen. Also rename the bit definition as per the reference manual. Tested on mx6q, mx6dl, mx6solo and mx53. Based on a patch from Eric Nelson for U-boot. Signed-off-by: Fabio Estevam Tested-by: Eric Nelson Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/imx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 3b6c1a2e25de..392154d13614 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -116,7 +116,7 @@ #define UCR3_DSR (1<<10) /* Data set ready */ #define UCR3_DCD (1<<9) /* Data carrier detect */ #define UCR3_RI (1<<8) /* Ring indicator */ -#define UCR3_TIMEOUTEN (1<<7) /* Timeout interrupt enable */ +#define UCR3_ADNIMP (1<<7) /* Autobaud Detection Not Improved */ #define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */ #define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */ #define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */ @@ -1174,7 +1174,7 @@ static int imx_startup(struct uart_port *port) if (!is_imx1_uart(sport)) { temp = readl(sport->port.membase + UCR3); - temp |= IMX21_UCR3_RXDMUXSEL; + temp |= IMX21_UCR3_RXDMUXSEL | UCR3_ADNIMP; writel(temp, sport->port.membase + UCR3); } -- GitLab