diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts new file mode 100644 index 0000000000000000000000000000000000000000..3d2f5a06df3f1216d0861a07a8f5672760668c76 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts @@ -0,0 +1,219 @@ +/* + * MPC8313E RDB Device Tree Source + * + * Copyright 2005, 2006, 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/ { + model = "MPC8313ERDB"; + compatible = "MPC83xx"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8313@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <4000>; // L1, 16K + i-cache-size = <4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + 32-bit; + }; + }; + + memory { + device_type = "memory"; + reg = <00000000 08000000>; // 128MB at 0 + }; + + soc8313@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = ; + bus-frequency = <0>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <200 100>; + }; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = ; + interrupt-parent = <700>; + dfsrr; + }; + + i2c@3100 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3100 100>; + interrupts = ; + interrupt-parent = <700>; + dfsrr; + }; + + spi@7000 { + device_type = "spi"; + compatible = "mpc83xx_spi"; + reg = <7000 1000>; + interrupts = <10 8>; + interrupt-parent = <700>; + mode = <0>; + }; + + /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ + usb@23000 { + device_type = "usb"; + compatible = "fsl-usb2-dr"; + reg = <23000 1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <700>; + interrupts = <26 2>; + phy_type = "utmi_wide"; + }; + + mdio@24520 { + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <24520>; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <700>; + interrupts = <13 2>; + reg = <1>; + device_type = "ethernet-phy"; + }; + ethernet-phy@4 { + linux,phandle = <2452004>; + interrupt-parent = <700>; + interrupts = <14 2>; + reg = <4>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <25 8 24 8 23 8>; + interrupt-parent = <700>; + phy-handle = <2452001>; + }; + + ethernet@25000 { + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <22 8 21 8 20 8>; + interrupt-parent = <700>; + phy-handle = <2452004>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; + clock-frequency = <0>; + interrupts = <9 8>; + interrupt-parent = <700>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; + clock-frequency = <0>; + interrupts = ; + interrupt-parent = <700>; + }; + + pci@8500 { + interrupt-map-mask = ; + interrupt-map = < + + /* IDSEL 0x0E -mini PCI */ + 7000 0 0 1 700 12 8 + 7000 0 0 2 700 12 8 + 7000 0 0 3 700 12 8 + 7000 0 0 4 700 12 8 + + /* IDSEL 0x0F - PCI slot */ + 7800 0 0 1 700 11 8 + 7800 0 0 2 700 12 8 + 7800 0 0 3 700 11 8 + 7800 0 0 4 700 12 8>; + interrupt-parent = <700>; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <02000000 0 90000000 90000000 0 10000000 + 42000000 0 80000000 80000000 0 10000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8500 100>; + compatible = "83xx"; + device_type = "pci"; + }; + + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "talitos"; + reg = <30000 7000>; + interrupts = ; + interrupt-parent = <700>; + /* Rev. 2.2 */ + num-channels = <1>; + channel-fifo-len = <18>; + exec-units-mask = <0000004c>; + descriptor-types-mask = <0122003f>; + }; + + /* IPIC + * interrupts cell = + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + pic@700 { + linux,phandle = <700>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <700 100>; + built-in; + device_type = "ipic"; + }; + }; +}; diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index edcd5b875b6699e8a3f2f8dc21c63f541d37eae1..46883c5136acdb0302b5bd7027f3fbb6f4a2cca9 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -5,6 +5,12 @@ choice prompt "Machine Type" default MPC834x_SYS +config MPC8313_RDB + bool "Freescale MPC8313 RDB" + select DEFAULT_UIMAGE + help + This option enables support for the MPC8313 RDB board. + config MPC832x_MDS bool "Freescale MPC832x MDS" select DEFAULT_UIMAGE @@ -41,6 +47,12 @@ config MPC8360E_PB endchoice +config PPC_MPC831x + bool + select PPC_UDBG_16550 + select PPC_INDIRECT_PCI + default y if MPC8313_RDB + config PPC_MPC832x bool select PPC_UDBG_16550 diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile index f1aa7e24a9382de1f18153dca7ce5a4da2c305fe..0b732a79c0a8e2bab930cfdae30674bab25f5528 100644 --- a/arch/powerpc/platforms/83xx/Makefile +++ b/arch/powerpc/platforms/83xx/Makefile @@ -3,6 +3,7 @@ # obj-y := misc.o obj-$(CONFIG_PCI) += pci.o +obj-$(CONFIG_MPC8313_RDB) += mpc8313_rdb.o obj-$(CONFIG_MPC834x_SYS) += mpc834x_sys.o obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o obj-$(CONFIG_MPC8360E_PB) += mpc8360e_pb.o diff --git a/arch/powerpc/platforms/83xx/mpc8313_rdb.c b/arch/powerpc/platforms/83xx/mpc8313_rdb.c new file mode 100644 index 0000000000000000000000000000000000000000..c3b98c34eb6ba7b66434f5a4f1bbe3b0d8cec2d2 --- /dev/null +++ b/arch/powerpc/platforms/83xx/mpc8313_rdb.c @@ -0,0 +1,99 @@ +/* + * arch/powerpc/platforms/83xx/mpc8313_rdb.c + * + * Description: MPC8313x RDB board specific routines. + * This file is based on mpc834x_sys.c + * Author: Lo Wlison + * + * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include + +#include +#include +#include + +#include "mpc83xx.h" + +#undef DEBUG +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +#ifndef CONFIG_PCI +unsigned long isa_io_base = 0; +unsigned long isa_mem_base = 0; +#endif + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init mpc8313_rdb_setup_arch(void) +{ + struct device_node *np; + + if (ppc_md.progress) + ppc_md.progress("mpc8313_rdb_setup_arch()", 0); + +#ifdef CONFIG_PCI + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) + add_bridge(np); + + ppc_md.pci_exclude_device = mpc83xx_exclude_device; +#endif +} + +void __init mpc8313_rdb_init_IRQ(void) +{ + struct device_node *np; + + np = of_find_node_by_type(NULL, "ipic"); + if (!np) + return; + + ipic_init(np, 0); + + /* Initialize the default interrupt mapping priorities, + * in case the boot rom changed something on us. + */ + ipic_set_default_priority(); +} + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init mpc8313_rdb_probe(void) +{ + char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), + "model", NULL); + if (model == NULL) + return 0; + if (strcmp(model, "MPC8313ERDB")) + return 0; + + DBG("MPC8313 RDB found\n"); + + return 1; +} + +define_machine(mpc8313_rdb) { + .name = "MPC8313 RDB", + .probe = mpc8313_rdb_probe, + .setup_arch = mpc8313_rdb_setup_arch, + .init_IRQ = mpc8313_rdb_init_IRQ, + .get_irq = ipic_get_irq, + .restart = mpc83xx_restart, + .time_init = mpc83xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +};