提交 b1c711d6 编写于 作者: H Heikki Krogerus 提交者: Felipe Balbi

usb: otg: mv_otg: Start using struct usb_otg

Use struct usb_otg members with OTG specific functions instead
of usb_phy members.

[ balbi@ti.com : fixed a compile error on isp1704_charger.c ]
Signed-off-by: NHeikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: NMarek Vasut <marek.vasut@gmail.com>
Acked-by: NNeil Zhang <zhangwm@marvell.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
上级 fcc8ebc9
......@@ -274,8 +274,8 @@ static void isp1704_charger_work(struct work_struct *data)
case POWER_SUPPLY_TYPE_USB:
default:
/* enable data pullups */
if (isp->phy->gadget)
usb_gadget_connect(isp->phy->gadget);
if (isp->phy->otg->gadget)
usb_gadget_connect(isp->phy->otg->gadget);
}
break;
case USB_EVENT_NONE:
......@@ -293,8 +293,8 @@ static void isp1704_charger_work(struct work_struct *data)
* chargers. The pullups may be enabled elsewhere, so this can
* not be the final solution.
*/
if (isp->phy->gadget)
usb_gadget_disconnect(isp->phy->gadget);
if (isp->phy->otg->gadget)
usb_gadget_disconnect(isp->phy->otg->gadget);
isp1704_charger_set_power(isp, 0);
break;
......@@ -459,8 +459,8 @@ static int __devinit isp1704_charger_probe(struct platform_device *pdev)
* enumerated. The charger driver should be always loaded before any
* gadget is loaded.
*/
if (isp->phy->gadget)
usb_gadget_disconnect(isp->phy->gadget);
if (isp->phy->otg->gadget)
usb_gadget_disconnect(isp->phy->otg->gadget);
/* Detect charger if VBUS is valid (the cable was already plugged). */
ret = isp1704_read(isp, ULPI_USB_INT_STS);
......
......@@ -55,16 +55,16 @@ static char *state_string[] = {
"a_vbus_err"
};
static int mv_otg_set_vbus(struct usb_phy *otg, bool on)
static int mv_otg_set_vbus(struct usb_otg *otg, bool on)
{
struct mv_otg *mvotg = container_of(otg, struct mv_otg, otg);
struct mv_otg *mvotg = container_of(otg->phy, struct mv_otg, phy);
if (mvotg->pdata->set_vbus == NULL)
return -ENODEV;
return mvotg->pdata->set_vbus(on);
}
static int mv_otg_set_host(struct usb_phy *otg,
static int mv_otg_set_host(struct usb_otg *otg,
struct usb_bus *host)
{
otg->host = host;
......@@ -72,7 +72,7 @@ static int mv_otg_set_host(struct usb_phy *otg,
return 0;
}
static int mv_otg_set_peripheral(struct usb_phy *otg,
static int mv_otg_set_peripheral(struct usb_otg *otg,
struct usb_gadget *gadget)
{
otg->gadget = gadget;
......@@ -203,7 +203,7 @@ static void mv_otg_init_irq(struct mv_otg *mvotg)
static void mv_otg_start_host(struct mv_otg *mvotg, int on)
{
#ifdef CONFIG_USB
struct usb_phy *otg = &mvotg->otg;
struct usb_otg *otg = mvotg->phy.otg;
struct usb_hcd *hcd;
if (!otg->host)
......@@ -222,12 +222,12 @@ static void mv_otg_start_host(struct mv_otg *mvotg, int on)
static void mv_otg_start_periphrals(struct mv_otg *mvotg, int on)
{
struct usb_phy *otg = &mvotg->otg;
struct usb_otg *otg = mvotg->phy.otg;
if (!otg->gadget)
return;
dev_info(otg->dev, "gadget %s\n", on ? "on" : "off");
dev_info(mvotg->phy.dev, "gadget %s\n", on ? "on" : "off");
if (on)
usb_gadget_vbus_connect(otg->gadget);
......@@ -343,69 +343,69 @@ static void mv_otg_update_inputs(struct mv_otg *mvotg)
static void mv_otg_update_state(struct mv_otg *mvotg)
{
struct mv_otg_ctrl *otg_ctrl = &mvotg->otg_ctrl;
struct usb_phy *otg = &mvotg->otg;
int old_state = otg->state;
struct usb_phy *phy = &mvotg->phy;
int old_state = phy->state;
switch (old_state) {
case OTG_STATE_UNDEFINED:
otg->state = OTG_STATE_B_IDLE;
phy->state = OTG_STATE_B_IDLE;
/* FALL THROUGH */
case OTG_STATE_B_IDLE:
if (otg_ctrl->id == 0)
otg->state = OTG_STATE_A_IDLE;
phy->state = OTG_STATE_A_IDLE;
else if (otg_ctrl->b_sess_vld)
otg->state = OTG_STATE_B_PERIPHERAL;
phy->state = OTG_STATE_B_PERIPHERAL;
break;
case OTG_STATE_B_PERIPHERAL:
if (!otg_ctrl->b_sess_vld || otg_ctrl->id == 0)
otg->state = OTG_STATE_B_IDLE;
phy->state = OTG_STATE_B_IDLE;
break;
case OTG_STATE_A_IDLE:
if (otg_ctrl->id)
otg->state = OTG_STATE_B_IDLE;
phy->state = OTG_STATE_B_IDLE;
else if (!(otg_ctrl->a_bus_drop) &&
(otg_ctrl->a_bus_req || otg_ctrl->a_srp_det))
otg->state = OTG_STATE_A_WAIT_VRISE;
phy->state = OTG_STATE_A_WAIT_VRISE;
break;
case OTG_STATE_A_WAIT_VRISE:
if (otg_ctrl->a_vbus_vld)
otg->state = OTG_STATE_A_WAIT_BCON;
phy->state = OTG_STATE_A_WAIT_BCON;
break;
case OTG_STATE_A_WAIT_BCON:
if (otg_ctrl->id || otg_ctrl->a_bus_drop
|| otg_ctrl->a_wait_bcon_timeout) {
mv_otg_cancel_timer(mvotg, A_WAIT_BCON_TIMER);
mvotg->otg_ctrl.a_wait_bcon_timeout = 0;
otg->state = OTG_STATE_A_WAIT_VFALL;
phy->state = OTG_STATE_A_WAIT_VFALL;
otg_ctrl->a_bus_req = 0;
} else if (!otg_ctrl->a_vbus_vld) {
mv_otg_cancel_timer(mvotg, A_WAIT_BCON_TIMER);
mvotg->otg_ctrl.a_wait_bcon_timeout = 0;
otg->state = OTG_STATE_A_VBUS_ERR;
phy->state = OTG_STATE_A_VBUS_ERR;
} else if (otg_ctrl->b_conn) {
mv_otg_cancel_timer(mvotg, A_WAIT_BCON_TIMER);
mvotg->otg_ctrl.a_wait_bcon_timeout = 0;
otg->state = OTG_STATE_A_HOST;
phy->state = OTG_STATE_A_HOST;
}
break;
case OTG_STATE_A_HOST:
if (otg_ctrl->id || !otg_ctrl->b_conn
|| otg_ctrl->a_bus_drop)
otg->state = OTG_STATE_A_WAIT_BCON;
phy->state = OTG_STATE_A_WAIT_BCON;
else if (!otg_ctrl->a_vbus_vld)
otg->state = OTG_STATE_A_VBUS_ERR;
phy->state = OTG_STATE_A_VBUS_ERR;
break;
case OTG_STATE_A_WAIT_VFALL:
if (otg_ctrl->id
|| (!otg_ctrl->b_conn && otg_ctrl->a_sess_vld)
|| otg_ctrl->a_bus_req)
otg->state = OTG_STATE_A_IDLE;
phy->state = OTG_STATE_A_IDLE;
break;
case OTG_STATE_A_VBUS_ERR:
if (otg_ctrl->id || otg_ctrl->a_clr_err
|| otg_ctrl->a_bus_drop) {
otg_ctrl->a_clr_err = 0;
otg->state = OTG_STATE_A_WAIT_VFALL;
phy->state = OTG_STATE_A_WAIT_VFALL;
}
break;
default:
......@@ -416,15 +416,17 @@ static void mv_otg_update_state(struct mv_otg *mvotg)
static void mv_otg_work(struct work_struct *work)
{
struct mv_otg *mvotg;
struct usb_phy *otg;
struct usb_phy *phy;
struct usb_otg *otg;
int old_state;
mvotg = container_of((struct delayed_work *)work, struct mv_otg, work);
run:
/* work queue is single thread, or we need spin_lock to protect */
otg = &mvotg->otg;
old_state = otg->state;
phy = &mvotg->phy;
otg = phy->otg;
old_state = phy->state;
if (!mvotg->active)
return;
......@@ -432,14 +434,14 @@ static void mv_otg_work(struct work_struct *work)
mv_otg_update_inputs(mvotg);
mv_otg_update_state(mvotg);
if (old_state != otg->state) {
if (old_state != phy->state) {
dev_info(&mvotg->pdev->dev, "change from state %s to %s\n",
state_string[old_state],
state_string[otg->state]);
state_string[phy->state]);
switch (otg->state) {
switch (phy->state) {
case OTG_STATE_B_IDLE:
mvotg->otg.default_a = 0;
otg->default_a = 0;
if (old_state == OTG_STATE_B_PERIPHERAL)
mv_otg_start_periphrals(mvotg, 0);
mv_otg_reset(mvotg);
......@@ -450,14 +452,14 @@ static void mv_otg_work(struct work_struct *work)
mv_otg_start_periphrals(mvotg, 1);
break;
case OTG_STATE_A_IDLE:
mvotg->otg.default_a = 1;
otg->default_a = 1;
mv_otg_enable(mvotg);
if (old_state == OTG_STATE_A_WAIT_VFALL)
mv_otg_start_host(mvotg, 0);
mv_otg_reset(mvotg);
break;
case OTG_STATE_A_WAIT_VRISE:
mv_otg_set_vbus(&mvotg->otg, 1);
mv_otg_set_vbus(otg, 1);
break;
case OTG_STATE_A_WAIT_BCON:
if (old_state != OTG_STATE_A_HOST)
......@@ -479,7 +481,7 @@ static void mv_otg_work(struct work_struct *work)
* here. In fact, it need host driver to notify us.
*/
mvotg->otg_ctrl.b_conn = 0;
mv_otg_set_vbus(&mvotg->otg, 0);
mv_otg_set_vbus(otg, 0);
break;
case OTG_STATE_A_VBUS_ERR:
break;
......@@ -548,8 +550,8 @@ set_a_bus_req(struct device *dev, struct device_attribute *attr,
return -1;
/* We will use this interface to change to A device */
if (mvotg->otg.state != OTG_STATE_B_IDLE
&& mvotg->otg.state != OTG_STATE_A_IDLE)
if (mvotg->phy.state != OTG_STATE_B_IDLE
&& mvotg->phy.state != OTG_STATE_A_IDLE)
return -1;
/* The clock may disabled and we need to set irq for ID detected */
......@@ -579,7 +581,7 @@ set_a_clr_err(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct mv_otg *mvotg = dev_get_drvdata(dev);
if (!mvotg->otg.default_a)
if (!mvotg->phy.otg->default_a)
return -1;
if (count > 2)
......@@ -615,7 +617,7 @@ set_a_bus_drop(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct mv_otg *mvotg = dev_get_drvdata(dev);
if (!mvotg->otg.default_a)
if (!mvotg->phy.otg->default_a)
return -1;
if (count > 2)
......@@ -688,9 +690,10 @@ int mv_otg_remove(struct platform_device *pdev)
for (clk_i = 0; clk_i <= mvotg->clknum; clk_i++)
clk_put(mvotg->clk[clk_i]);
otg_set_transceiver(NULL);
usb_set_transceiver(NULL);
platform_set_drvdata(pdev, NULL);
kfree(mvotg->phy.otg);
kfree(mvotg);
return 0;
......@@ -700,6 +703,7 @@ static int mv_otg_probe(struct platform_device *pdev)
{
struct mv_usb_platform_data *pdata = pdev->dev.platform_data;
struct mv_otg *mvotg;
struct usb_otg *otg;
struct resource *r;
int retval = 0, clk_i, i;
size_t size;
......@@ -716,6 +720,12 @@ static int mv_otg_probe(struct platform_device *pdev)
return -ENOMEM;
}
otg = kzalloc(sizeof *otg, GFP_KERNEL);
if (!otg) {
kfree(mvotg);
return -ENOMEM;
}
platform_set_drvdata(pdev, mvotg);
mvotg->pdev = pdev;
......@@ -741,12 +751,15 @@ static int mv_otg_probe(struct platform_device *pdev)
/* OTG common part */
mvotg->pdev = pdev;
mvotg->otg.dev = &pdev->dev;
mvotg->otg.label = driver_name;
mvotg->otg.set_host = mv_otg_set_host;
mvotg->otg.set_peripheral = mv_otg_set_peripheral;
mvotg->otg.set_vbus = mv_otg_set_vbus;
mvotg->otg.state = OTG_STATE_UNDEFINED;
mvotg->phy.dev = &pdev->dev;
mvotg->phy.otg = otg;
mvotg->phy.label = driver_name;
mvotg->phy.state = OTG_STATE_UNDEFINED;
otg->phy = &mvotg->phy;
otg->set_host = mv_otg_set_host;
otg->set_peripheral = mv_otg_set_peripheral;
otg->set_vbus = mv_otg_set_vbus;
for (i = 0; i < OTG_TIMER_NUM; i++)
init_timer(&mvotg->otg_ctrl.timer[i]);
......@@ -840,7 +853,7 @@ static int mv_otg_probe(struct platform_device *pdev)
goto err_disable_clk;
}
retval = otg_set_transceiver(&mvotg->otg);
retval = usb_set_transceiver(&mvotg->phy);
if (retval < 0) {
dev_err(&pdev->dev, "can't register transceiver, %d\n",
retval);
......@@ -867,7 +880,7 @@ static int mv_otg_probe(struct platform_device *pdev)
return 0;
err_set_transceiver:
otg_set_transceiver(NULL);
usb_set_transceiver(NULL);
err_free_irq:
free_irq(mvotg->irq, mvotg);
err_disable_clk:
......@@ -888,6 +901,7 @@ static int mv_otg_probe(struct platform_device *pdev)
clk_put(mvotg->clk[clk_i]);
platform_set_drvdata(pdev, NULL);
kfree(otg);
kfree(mvotg);
return retval;
......@@ -898,10 +912,10 @@ static int mv_otg_suspend(struct platform_device *pdev, pm_message_t state)
{
struct mv_otg *mvotg = platform_get_drvdata(pdev);
if (mvotg->otg.state != OTG_STATE_B_IDLE) {
if (mvotg->phy.state != OTG_STATE_B_IDLE) {
dev_info(&pdev->dev,
"OTG state is not B_IDLE, it is %d!\n",
mvotg->otg.state);
mvotg->phy.state);
return -EAGAIN;
}
......
......@@ -136,7 +136,7 @@ struct mv_otg_regs {
};
struct mv_otg {
struct usb_phy otg;
struct usb_phy phy;
struct mv_otg_ctrl otg_ctrl;
/* base address */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册