提交 b094516f 编写于 作者: M Mauro Carvalho Chehab

V4L/DVB (7769): Move other terrestrial tuners to common/tuners

Those tuners are currently used only under media/dvb. However,
they can support also analog TV. Better to move them to the same place
as the other hybrid tuners. This would make easier to use those tuners also
by analog drivers.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
上级 df7aaaf3
......@@ -99,6 +99,34 @@ config TUNER_MT20XX
help
Say Y here to include support for the MT2032 / MT2050 tuner.
config DVB_TUNER_MT2060
tristate "Microtune MT2060 silicon IF tuner"
depends on I2C
default m if DVB_FE_CUSTOMISE
help
A driver for the silicon IF tuner MT2060 from Microtune.
config DVB_TUNER_MT2266
tristate "Microtune MT2266 silicon tuner"
depends on I2C
default m if DVB_FE_CUSTOMISE
help
A driver for the silicon baseband tuner MT2266 from Microtune.
config DVB_TUNER_MT2131
tristate "Microtune MT2131 silicon tuner"
depends on I2C
default m if DVB_FE_CUSTOMISE
help
A driver for the silicon baseband tuner MT2131 from Microtune.
config DVB_TUNER_QT1010
tristate "Quantek QT1010 silicon tuner"
depends on DVB_CORE && I2C
default m if DVB_FE_CUSTOMISE
help
A driver for the silicon tuner QT1010 from Quantek.
config TUNER_XC2028
tristate "XCeive xc2028/xc3028 tuners"
depends on I2C && FW_LOADER
......
......@@ -16,6 +16,10 @@ obj-$(CONFIG_TUNER_TDA9887) += tda9887.o
obj-$(CONFIG_DVB_TDA827X) += tda827x.o
obj-$(CONFIG_DVB_TDA18271) += tda18271.o
obj-$(CONFIG_DVB_TUNER_XC5000) += xc5000.o
obj-$(CONFIG_DVB_TUNER_MT2060) += mt2060.o
obj-$(CONFIG_DVB_TUNER_MT2266) += mt2266.o
obj-$(CONFIG_DVB_TUNER_QT1010) += qt1010.o
obj-$(CONFIG_DVB_TUNER_MT2131) += mt2131.o
EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
......@@ -336,7 +336,7 @@ config DVB_S5H1411
An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
to support this frontend.
comment "Tuners/PLL support"
comment "Digital terrestrial only tuners/PLL"
depends on DVB_CORE
config DVB_PLL
......@@ -347,34 +347,6 @@ config DVB_PLL
This module drives a number of tuners based on PLL chips with a
common I2C interface. Say Y when you want to support these tuners.
config DVB_TUNER_QT1010
tristate "Quantek QT1010 silicon tuner"
depends on DVB_CORE && I2C
default m if DVB_FE_CUSTOMISE
help
A driver for the silicon tuner QT1010 from Quantek.
config DVB_TUNER_MT2060
tristate "Microtune MT2060 silicon IF tuner"
depends on I2C
default m if DVB_FE_CUSTOMISE
help
A driver for the silicon IF tuner MT2060 from Microtune.
config DVB_TUNER_MT2266
tristate "Microtune MT2266 silicon tuner"
depends on I2C
default m if DVB_FE_CUSTOMISE
help
A driver for the silicon baseband tuner MT2266 from Microtune.
config DVB_TUNER_MT2131
tristate "Microtune MT2131 silicon tuner"
depends on I2C
default m if DVB_FE_CUSTOMISE
help
A driver for the silicon baseband tuner MT2131 from Microtune.
config DVB_TUNER_DIB0070
tristate "DiBcom DiB0070 silicon base-band tuner"
depends on I2C
......
......@@ -40,12 +40,8 @@ obj-$(CONFIG_DVB_ISL6405) += isl6405.o
obj-$(CONFIG_DVB_ISL6421) += isl6421.o
obj-$(CONFIG_DVB_TDA10086) += tda10086.o
obj-$(CONFIG_DVB_TDA826X) += tda826x.o
obj-$(CONFIG_DVB_TUNER_MT2060) += mt2060.o
obj-$(CONFIG_DVB_TUNER_MT2266) += mt2266.o
obj-$(CONFIG_DVB_TUNER_DIB0070) += dib0070.o
obj-$(CONFIG_DVB_TUNER_QT1010) += qt1010.o
obj-$(CONFIG_DVB_TUA6100) += tua6100.o
obj-$(CONFIG_DVB_TUNER_MT2131) += mt2131.o
obj-$(CONFIG_DVB_S5H1409) += s5h1409.o
obj-$(CONFIG_DVB_TUNER_ITD1000) += itd1000.o
obj-$(CONFIG_DVB_AU8522) += au8522.o
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册