diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index ccc5410af996a5cf87a45d6e2eda9a7a97f31df6..56d3c0dcd2b802f8c5f4a4dd2847c15f8f0ca864 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -389,6 +389,9 @@ config NOT_COHERENT_CACHE bool depends on 4xx || 8xx || E200 default y + +config CONFIG_CHECK_CACHE_COHERENCY + bool endmenu source "init/Kconfig" @@ -451,7 +454,7 @@ config ARCH_ENABLE_MEMORY_HOTPLUG config KEXEC bool "kexec system call (EXPERIMENTAL)" - depends on PPC_MULTIPLATFORM && EXPERIMENTAL + depends on (PPC_PRPMC2800 || PPC_MULTIPLATFORM) && EXPERIMENTAL help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 81a531d84ff9ab383bde8d654efbb9cc0287f368..d6014a67694b5a78dcaf8911ef16facc66ef0b8a 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -148,7 +148,7 @@ all: $(KBUILD_IMAGE) CPPFLAGS_vmlinux.lds := -Upowerpc -BOOT_TARGETS = zImage zImage.initrd uImage +BOOT_TARGETS = zImage zImage.initrd zImage.dts zImage.dts_initrd uImage PHONY += $(BOOT_TARGETS) diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 5c384aad1184319bdfd7eafe984972be050ad45d..d4f9fef7f9e90ea7b9f11da4bd2b57a54fdd8330 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -43,9 +43,9 @@ $(addprefix $(obj)/,$(zlib) gunzip_util.o main.o): \ src-wlib := string.S crt0.S stdio.c main.c flatdevtree.c flatdevtree_misc.c \ ns16550.c serial.c simple_alloc.c div64.S util.S \ gunzip_util.c elf_util.c $(zlib) devtree.c \ - 44x.c ebony.c + 44x.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c src-plat := of.c cuboot-83xx.c cuboot-85xx.c holly.c \ - cuboot-ebony.c treeboot-ebony.c + cuboot-ebony.c treeboot-ebony.c prpmc2800.c src-boot := $(src-wlib) $(src-plat) empty.c src-boot := $(addprefix $(obj)/, $(src-boot)) @@ -132,6 +132,7 @@ image-$(CONFIG_PPC_CHRP) += zImage.chrp image-$(CONFIG_PPC_EFIKA) += zImage.chrp image-$(CONFIG_PPC_PMAC) += zImage.pmac image-$(CONFIG_PPC_HOLLY) += zImage.holly-elf +image-$(CONFIG_PPC_PRPMC2800) += zImage.prpmc2800 image-$(CONFIG_DEFAULT_UIMAGE) += uImage ifneq ($(CONFIG_DEVICE_TREE),"") @@ -154,9 +155,27 @@ targets += $(image-y) $(initrd-y) $(addprefix $(obj)/, $(initrd-y)): $(obj)/ramdisk.image.gz +dts- := $(patsubst zImage%, zImage.dts%, $(image-n) $(image-)) +dts-y := $(patsubst zImage%, zImage.dts%, $(image-y)) +dts-y := $(filter-out $(image-y), $(dts-y)) +targets += $(image-y) $(dts-y) + +dts_initrd- := $(patsubst zImage%, zImage.dts_initrd%, $(image-n) $(image-)) +dts_initrd-y := $(patsubst zImage%, zImage.dts_initrd%, $(image-y)) +dts_initrd-y := $(filter-out $(image-y), $(dts_initrd-y)) +targets += $(image-y) $(dts_initrd-y) + +$(addprefix $(obj)/, $(dts_initrd-y)): $(obj)/ramdisk.image.gz + # Don't put the ramdisk on the pattern rule; when its missing make will try # the pattern rule with less dependencies that also matches (even with the # hard dependency listed). +$(obj)/zImage.dts_initrd.%: vmlinux $(wrapperbits) $(dts) $(obj)/ramdisk.image.gz + $(call if_changed,wrap,$*,$(dts),,$(obj)/ramdisk.image.gz) + +$(obj)/zImage.dts.%: vmlinux $(wrapperbits) $(dts) + $(call if_changed,wrap,$*,$(dts)) + $(obj)/zImage.initrd.%: vmlinux $(wrapperbits) $(call if_changed,wrap,$*,,,$(obj)/ramdisk.image.gz) @@ -195,13 +214,18 @@ $(obj)/zImage: $(addprefix $(obj)/, $(image-y)) @rm -f $@; ln $< $@ $(obj)/zImage.initrd: $(addprefix $(obj)/, $(initrd-y)) @rm -f $@; ln $< $@ +$(obj)/zImage.dts: $(addprefix $(obj)/, $(dts-y)) + @rm -f $@; ln $< $@ +$(obj)/zImage.dts_initrd: $(addprefix $(obj)/, $(dts_initrd-y)) + @rm -f $@; ln $< $@ + install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y)) sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" $< # anything not in $(targets) clean-files += $(image-) $(initrd-) zImage zImage.initrd cuImage.* \ - treeImage.* + treeImage.* zImage.dts zImage.dts_initrd # clean up files cached by wrapper clean-kernel := vmlinux.strip vmlinux.bin diff --git a/arch/powerpc/boot/cuboot-83xx.c b/arch/powerpc/boot/cuboot-83xx.c index 6cbc20afb4d8bccb28e64337d9cd408eadbec259..9af554eea54be6ea105639e05185b3fe5e221a95 100644 --- a/arch/powerpc/boot/cuboot-83xx.c +++ b/arch/powerpc/boot/cuboot-83xx.c @@ -57,7 +57,7 @@ void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, memcpy(&bd, (bd_t *)r3, sizeof(bd)); loader_info.initrd_addr = r4; - loader_info.initrd_size = r4 ? r5 : 0; + loader_info.initrd_size = r4 ? r5 - r4 : 0; loader_info.cmdline = (char *)r6; loader_info.cmdline_len = r7 - r6; diff --git a/arch/powerpc/boot/cuboot-85xx.c b/arch/powerpc/boot/cuboot-85xx.c index f88ba00ac1223393e6ab6aff863b205979f8c007..e2560317f2784f0d904815a4e4db05b87d12ece5 100644 --- a/arch/powerpc/boot/cuboot-85xx.c +++ b/arch/powerpc/boot/cuboot-85xx.c @@ -58,7 +58,7 @@ void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, memcpy(&bd, (bd_t *)r3, sizeof(bd)); loader_info.initrd_addr = r4; - loader_info.initrd_size = r4 ? r5 : 0; + loader_info.initrd_size = r4 ? r5 - r4 : 0; loader_info.cmdline = (char *)r6; loader_info.cmdline_len = r7 - r6; diff --git a/arch/powerpc/boot/dts/prpmc2800.dts b/arch/powerpc/boot/dts/prpmc2800.dts new file mode 100644 index 0000000000000000000000000000000000000000..568965a022b98aa086768bac8ba7ed48a55850af --- /dev/null +++ b/arch/powerpc/boot/dts/prpmc2800.dts @@ -0,0 +1,315 @@ +/* Device Tree Source for Motorola PrPMC2800 + * + * Author: Mark A. Greer + * + * 2007 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Property values that are labeled as "Default" will be updated by bootwrapper + * if it can determine the exact PrPMC type. + * + * To build: + * dtc -I dts -O asm -o prpmc2800.S -b 0 prpmc2800.dts + * dtc -I dts -O dtb -o prpmc2800.dtb -b 0 prpmc2800.dts + */ + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "PrPMC280/PrPMC2800"; /* Default */ + compatible = "motorola,PrPMC2800"; + coherency-off; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,7447 { + device_type = "cpu"; + reg = <0>; + clock-frequency = <2bb0b140>; /* Default (733 MHz) */ + bus-frequency = <7f28155>; /* 133.333333 MHz */ + timebase-frequency = <1fca055>; /* 33.333333 MHz */ + i-cache-line-size = <20>; + d-cache-line-size = <20>; + i-cache-size = <8000>; + d-cache-size = <8000>; + }; + }; + + memory { + device_type = "memory"; + reg = <00000000 20000000>; /* Default (512MB) */ + }; + + mv64x60@f1000000 { /* Marvell Discovery */ + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <1>; + model = "mv64360"; /* Default */ + compatible = "marvell,mv64x60"; + clock-frequency = <7f28155>; /* 133.333333 MHz */ + reg = ; + virtual-reg = ; + ranges = <88000000 88000000 01000000 /* PCI 0 I/O Space */ + 80000000 80000000 08000000 /* PCI 0 MEM Space */ + a0000000 a0000000 04000000 /* User FLASH */ + 00000000 f1000000 00010000 /* Bridge's regs */ + f2000000 f2000000 00040000>; /* Integrated SRAM */ + + flash@a0000000 { + device_type = "rom"; + compatible = "direct-mapped"; + reg = ; /* Default (64MB) */ + probe-type = "CFI"; + bank-width = <4>; + partitions = <00000000 00100000 /* RO */ + 00100000 00040001 /* RW */ + 00140000 00400000 /* RO */ + 00540000 039c0000 /* RO */ + 03f00000 00100000>; /* RO */ + partition-names = "FW Image A", "FW Config Data", "Kernel Image", "Filesystem", "FW Image B"; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + device_type = "mdio"; + compatible = "marvell,mv64x60-mdio"; + ethernet-phy@1 { + device_type = "ethernet-phy"; + compatible = "broadcom,bcm5421"; + interrupts = <4c>; /* GPP 12 */ + interrupt-parent = <&/mv64x60/pic>; + reg = <1>; + }; + ethernet-phy@3 { + device_type = "ethernet-phy"; + compatible = "broadcom,bcm5421"; + interrupts = <4c>; /* GPP 12 */ + interrupt-parent = <&/mv64x60/pic>; + reg = <3>; + }; + }; + + ethernet@2000 { + reg = <2000 2000>; + eth0 { + device_type = "network"; + compatible = "marvell,mv64x60-eth"; + block-index = <0>; + interrupts = <20>; + interrupt-parent = <&/mv64x60/pic>; + phy = <&/mv64x60/mdio/ethernet-phy@1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + eth1 { + device_type = "network"; + compatible = "marvell,mv64x60-eth"; + block-index = <1>; + interrupts = <21>; + interrupt-parent = <&/mv64x60/pic>; + phy = <&/mv64x60/mdio/ethernet-phy@3>; + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + }; + + sdma@4000 { + device_type = "dma"; + compatible = "marvell,mv64x60-sdma"; + reg = <4000 c18>; + virtual-reg = ; + interrupt-base = <0>; + interrupts = <24>; + interrupt-parent = <&/mv64x60/pic>; + }; + + sdma@6000 { + device_type = "dma"; + compatible = "marvell,mv64x60-sdma"; + reg = <6000 c18>; + virtual-reg = ; + interrupt-base = <0>; + interrupts = <26>; + interrupt-parent = <&/mv64x60/pic>; + }; + + brg@b200 { + compatible = "marvell,mv64x60-brg"; + reg = ; + clock-src = <8>; + clock-frequency = <7ed6b40>; + current-speed = <2580>; + bcr = <0>; + }; + + brg@b208 { + compatible = "marvell,mv64x60-brg"; + reg = ; + clock-src = <8>; + clock-frequency = <7ed6b40>; + current-speed = <2580>; + bcr = <0>; + }; + + cunit@f200 { + reg = ; + }; + + mpscrouting@b400 { + reg = ; + }; + + mpscintr@b800 { + reg = ; + virtual-reg = ; + }; + + mpsc@8000 { + device_type = "serial"; + compatible = "marvell,mpsc"; + reg = <8000 38>; + virtual-reg = ; + sdma = <&/mv64x60/sdma@4000>; + brg = <&/mv64x60/brg@b200>; + cunit = <&/mv64x60/cunit@f200>; + mpscrouting = <&/mv64x60/mpscrouting@b400>; + mpscintr = <&/mv64x60/mpscintr@b800>; + block-index = <0>; + max_idle = <28>; + chr_1 = <0>; + chr_2 = <0>; + chr_10 = <3>; + mpcr = <0>; + interrupts = <28>; + interrupt-parent = <&/mv64x60/pic>; + }; + + mpsc@9000 { + device_type = "serial"; + compatible = "marvell,mpsc"; + reg = <9000 38>; + virtual-reg = ; + sdma = <&/mv64x60/sdma@6000>; + brg = <&/mv64x60/brg@b208>; + cunit = <&/mv64x60/cunit@f200>; + mpscrouting = <&/mv64x60/mpscrouting@b400>; + mpscintr = <&/mv64x60/mpscintr@b800>; + block-index = <1>; + max_idle = <28>; + chr_1 = <0>; + chr_2 = <0>; + chr_10 = <3>; + mpcr = <0>; + interrupts = <2a>; + interrupt-parent = <&/mv64x60/pic>; + }; + + i2c@c000 { + device_type = "i2c"; + compatible = "marvell,mv64x60-i2c"; + reg = ; + virtual-reg = ; + freq_m = <8>; + freq_n = <3>; + timeout = <3e8>; /* 1000 = 1 second */ + retries = <1>; + interrupts = <25>; + interrupt-parent = <&/mv64x60/pic>; + }; + + pic { + #interrupt-cells = <1>; + #address-cells = <0>; + compatible = "marvell,mv64x60-pic"; + reg = <0000 88>; + interrupt-controller; + }; + + mpp@f000 { + compatible = "marvell,mv64x60-mpp"; + reg = ; + }; + + gpp@f100 { + compatible = "marvell,mv64x60-gpp"; + reg = ; + }; + + pci@80000000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "marvell,mv64x60-pci"; + reg = <0cf8 8>; + ranges = <01000000 0 0 88000000 0 01000000 + 02000000 0 80000000 80000000 0 08000000>; + bus-range = <0 ff>; + clock-frequency = <3EF1480>; + interrupt-pci-iack = <0c34>; + interrupt-parent = <&/mv64x60/pic>; + interrupt-map-mask = ; + interrupt-map = < + /* IDSEL 0x0a */ + 5000 0 0 1 &/mv64x60/pic 50 + 5000 0 0 2 &/mv64x60/pic 51 + 5000 0 0 3 &/mv64x60/pic 5b + 5000 0 0 4 &/mv64x60/pic 5d + + /* IDSEL 0x0b */ + 5800 0 0 1 &/mv64x60/pic 5b + 5800 0 0 2 &/mv64x60/pic 5d + 5800 0 0 3 &/mv64x60/pic 50 + 5800 0 0 4 &/mv64x60/pic 51 + + /* IDSEL 0x0c */ + 6000 0 0 1 &/mv64x60/pic 5b + 6000 0 0 2 &/mv64x60/pic 5d + 6000 0 0 3 &/mv64x60/pic 50 + 6000 0 0 4 &/mv64x60/pic 51 + + /* IDSEL 0x0d */ + 6800 0 0 1 &/mv64x60/pic 5d + 6800 0 0 2 &/mv64x60/pic 50 + 6800 0 0 3 &/mv64x60/pic 51 + 6800 0 0 4 &/mv64x60/pic 5b + >; + }; + + cpu-error@0070 { + compatible = "marvell,mv64x60-cpu-error"; + reg = <0070 10 0128 28>; + interrupts = <03>; + interrupt-parent = <&/mv64x60/pic>; + }; + + sram-ctrl@0380 { + compatible = "marvell,mv64x60-sram-ctrl"; + reg = <0380 80>; + interrupts = <0d>; + interrupt-parent = <&/mv64x60/pic>; + }; + + pci-error@1d40 { + compatible = "marvell,mv64x60-pci-error"; + reg = <1d40 40 0c28 4>; + interrupts = <0c>; + interrupt-parent = <&/mv64x60/pic>; + }; + + mem-ctrl@1400 { + compatible = "marvell,mv64x60-mem-ctrl"; + reg = <1400 60>; + interrupts = <11>; + interrupt-parent = <&/mv64x60/pic>; + }; + }; + + chosen { + bootargs = "ip=on console=ttyMM0"; + linux,stdout-path = "/mv64x60@f1000000/mpsc@8000"; + }; +}; diff --git a/arch/powerpc/boot/mpsc.c b/arch/powerpc/boot/mpsc.c new file mode 100644 index 0000000000000000000000000000000000000000..f1c0e965e5ceb74acdb850c2a8b8c67aab0a66d5 --- /dev/null +++ b/arch/powerpc/boot/mpsc.c @@ -0,0 +1,170 @@ +/* + * MPSC/UART driver for the Marvell mv64360, mv64460, ... + * + * Author: Mark A. Greer + * + * 2007 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#include +#include +#include "types.h" +#include "string.h" +#include "stdio.h" +#include "io.h" +#include "ops.h" + +extern void udelay(long delay); + +#define MPSC_CHR_1 0x000c + +#define MPSC_CHR_2 0x0010 +#define MPSC_CHR_2_TA (1<<7) +#define MPSC_CHR_2_TCS (1<<9) +#define MPSC_CHR_2_RA (1<<23) +#define MPSC_CHR_2_CRD (1<<25) +#define MPSC_CHR_2_EH (1<<31) + +#define MPSC_CHR_4 0x0018 +#define MPSC_CHR_4_Z (1<<29) + +#define MPSC_CHR_5 0x001c +#define MPSC_CHR_5_CTL1_INTR (1<<12) +#define MPSC_CHR_5_CTL1_VALID (1<<15) + +#define MPSC_CHR_10 0x0030 + +#define MPSC_INTR_CAUSE 0x0000 +#define MPSC_INTR_CAUSE_RCC (1<<6) +#define MPSC_INTR_MASK 0x0080 + +#define SDMA_SDCM 0x0008 +#define SDMA_SDCM_AR (1<<15) +#define SDMA_SDCM_AT (1<<31) + +static volatile char *mpsc_base; +static volatile char *mpscintr_base; +static u32 chr1, chr2; + +static int mpsc_open(void) +{ + chr1 = in_le32((u32 *)(mpsc_base + MPSC_CHR_1)) & 0x00ff0000; + chr2 = in_le32((u32 *)(mpsc_base + MPSC_CHR_2)) & ~(MPSC_CHR_2_TA + | MPSC_CHR_2_TCS | MPSC_CHR_2_RA | MPSC_CHR_2_CRD + | MPSC_CHR_2_EH); + out_le32((u32 *)(mpsc_base + MPSC_CHR_4), MPSC_CHR_4_Z); + out_le32((u32 *)(mpsc_base + MPSC_CHR_5), + MPSC_CHR_5_CTL1_INTR | MPSC_CHR_5_CTL1_VALID); + out_le32((u32 *)(mpsc_base + MPSC_CHR_2), chr2 | MPSC_CHR_2_EH); + return 0; +} + +static void mpsc_putc(unsigned char c) +{ + while (in_le32((u32 *)(mpsc_base + MPSC_CHR_2)) & MPSC_CHR_2_TCS); + + out_le32((u32 *)(mpsc_base + MPSC_CHR_1), chr1 | c); + out_le32((u32 *)(mpsc_base + MPSC_CHR_2), chr2 | MPSC_CHR_2_TCS); +} + +static unsigned char mpsc_getc(void) +{ + u32 cause = 0; + unsigned char c; + + while (!(cause & MPSC_INTR_CAUSE_RCC)) + cause = in_le32((u32 *)(mpscintr_base + MPSC_INTR_CAUSE)); + + c = in_8((u8 *)(mpsc_base + MPSC_CHR_10 + 2)); + out_8((u8 *)(mpsc_base + MPSC_CHR_10 + 2), c); + out_le32((u32 *)(mpscintr_base + MPSC_INTR_CAUSE), + cause & ~MPSC_INTR_CAUSE_RCC); + + return c; +} + +static u8 mpsc_tstc(void) +{ + return (u8)((in_le32((u32 *)(mpscintr_base + MPSC_INTR_CAUSE)) + & MPSC_INTR_CAUSE_RCC) != 0); +} + +static void mpsc_stop_dma(volatile char *sdma_base) +{ + out_le32((u32 *)(mpsc_base + MPSC_CHR_2),MPSC_CHR_2_TA | MPSC_CHR_2_RA); + out_le32((u32 *)(sdma_base + SDMA_SDCM), SDMA_SDCM_AR | SDMA_SDCM_AT); + + while ((in_le32((u32 *)(sdma_base + SDMA_SDCM)) + & (SDMA_SDCM_AR | SDMA_SDCM_AT)) != 0) + udelay(100); +} + +static volatile char *mpsc_get_virtreg_of_phandle(void *devp, char *prop) +{ + void *v; + int n; + + n = getprop(devp, prop, &v, sizeof(v)); + if (n != sizeof(v)) + goto err_out; + + devp = find_node_by_linuxphandle((u32)v); + if (devp == NULL) + goto err_out; + + n = getprop(devp, "virtual-reg", &v, sizeof(v)); + if (n == sizeof(v)) + return v; + +err_out: + return NULL; +} + +int mpsc_console_init(void *devp, struct serial_console_data *scdp) +{ + void *v; + int n, reg_set; + volatile char *sdma_base; + + n = getprop(devp, "virtual-reg", &v, sizeof(v)); + if (n != sizeof(v)) + goto err_out; + mpsc_base = v; + + sdma_base = mpsc_get_virtreg_of_phandle(devp, "sdma"); + if (sdma_base == NULL) + goto err_out; + + mpscintr_base = mpsc_get_virtreg_of_phandle(devp, "mpscintr"); + if (mpscintr_base == NULL) + goto err_out; + + n = getprop(devp, "block-index", &v, sizeof(v)); + if (n != sizeof(v)) + goto err_out; + reg_set = (int)v; + + mpscintr_base += (reg_set == 0) ? 0x4 : 0xc; + + /* Make sure the mpsc ctlrs are shutdown */ + out_le32((u32 *)(mpscintr_base + MPSC_INTR_CAUSE), 0); + out_le32((u32 *)(mpscintr_base + MPSC_INTR_CAUSE), 0); + out_le32((u32 *)(mpscintr_base + MPSC_INTR_MASK), 0); + out_le32((u32 *)(mpscintr_base + MPSC_INTR_MASK), 0); + + mpsc_stop_dma(sdma_base); + + scdp->open = mpsc_open; + scdp->putc = mpsc_putc; + scdp->getc = mpsc_getc; + scdp->tstc = mpsc_tstc; + scdp->close = NULL; + + return 0; + +err_out: + return -1; +} diff --git a/arch/powerpc/boot/mv64x60.c b/arch/powerpc/boot/mv64x60.c new file mode 100644 index 0000000000000000000000000000000000000000..b43259455d4b075cd56a3099189ddb37f245fde2 --- /dev/null +++ b/arch/powerpc/boot/mv64x60.c @@ -0,0 +1,581 @@ +/* + * Marvell hostbridge routines + * + * Author: Mark A. Greer + * + * 2004, 2005, 2007 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#include +#include +#include "types.h" +#include "elf.h" +#include "page.h" +#include "string.h" +#include "stdio.h" +#include "io.h" +#include "ops.h" +#include "mv64x60.h" + +#define PCI_DEVFN(slot,func) ((((slot) & 0x1f) << 3) | ((func) & 0x07)) + +#define MV64x60_CPU2MEM_WINDOWS 4 +#define MV64x60_CPU2MEM_0_BASE 0x0008 +#define MV64x60_CPU2MEM_0_SIZE 0x0010 +#define MV64x60_CPU2MEM_1_BASE 0x0208 +#define MV64x60_CPU2MEM_1_SIZE 0x0210 +#define MV64x60_CPU2MEM_2_BASE 0x0018 +#define MV64x60_CPU2MEM_2_SIZE 0x0020 +#define MV64x60_CPU2MEM_3_BASE 0x0218 +#define MV64x60_CPU2MEM_3_SIZE 0x0220 + +#define MV64x60_ENET2MEM_BAR_ENABLE 0x2290 +#define MV64x60_ENET2MEM_0_BASE 0x2200 +#define MV64x60_ENET2MEM_0_SIZE 0x2204 +#define MV64x60_ENET2MEM_1_BASE 0x2208 +#define MV64x60_ENET2MEM_1_SIZE 0x220c +#define MV64x60_ENET2MEM_2_BASE 0x2210 +#define MV64x60_ENET2MEM_2_SIZE 0x2214 +#define MV64x60_ENET2MEM_3_BASE 0x2218 +#define MV64x60_ENET2MEM_3_SIZE 0x221c +#define MV64x60_ENET2MEM_4_BASE 0x2220 +#define MV64x60_ENET2MEM_4_SIZE 0x2224 +#define MV64x60_ENET2MEM_5_BASE 0x2228 +#define MV64x60_ENET2MEM_5_SIZE 0x222c +#define MV64x60_ENET2MEM_ACC_PROT_0 0x2294 +#define MV64x60_ENET2MEM_ACC_PROT_1 0x2298 +#define MV64x60_ENET2MEM_ACC_PROT_2 0x229c + +#define MV64x60_MPSC2MEM_BAR_ENABLE 0xf250 +#define MV64x60_MPSC2MEM_0_BASE 0xf200 +#define MV64x60_MPSC2MEM_0_SIZE 0xf204 +#define MV64x60_MPSC2MEM_1_BASE 0xf208 +#define MV64x60_MPSC2MEM_1_SIZE 0xf20c +#define MV64x60_MPSC2MEM_2_BASE 0xf210 +#define MV64x60_MPSC2MEM_2_SIZE 0xf214 +#define MV64x60_MPSC2MEM_3_BASE 0xf218 +#define MV64x60_MPSC2MEM_3_SIZE 0xf21c +#define MV64x60_MPSC_0_REMAP 0xf240 +#define MV64x60_MPSC_1_REMAP 0xf244 +#define MV64x60_MPSC2MEM_ACC_PROT_0 0xf254 +#define MV64x60_MPSC2MEM_ACC_PROT_1 0xf258 +#define MV64x60_MPSC2REGS_BASE 0xf25c + +#define MV64x60_IDMA2MEM_BAR_ENABLE 0x0a80 +#define MV64x60_IDMA2MEM_0_BASE 0x0a00 +#define MV64x60_IDMA2MEM_0_SIZE 0x0a04 +#define MV64x60_IDMA2MEM_1_BASE 0x0a08 +#define MV64x60_IDMA2MEM_1_SIZE 0x0a0c +#define MV64x60_IDMA2MEM_2_BASE 0x0a10 +#define MV64x60_IDMA2MEM_2_SIZE 0x0a14 +#define MV64x60_IDMA2MEM_3_BASE 0x0a18 +#define MV64x60_IDMA2MEM_3_SIZE 0x0a1c +#define MV64x60_IDMA2MEM_4_BASE 0x0a20 +#define MV64x60_IDMA2MEM_4_SIZE 0x0a24 +#define MV64x60_IDMA2MEM_5_BASE 0x0a28 +#define MV64x60_IDMA2MEM_5_SIZE 0x0a2c +#define MV64x60_IDMA2MEM_6_BASE 0x0a30 +#define MV64x60_IDMA2MEM_6_SIZE 0x0a34 +#define MV64x60_IDMA2MEM_7_BASE 0x0a38 +#define MV64x60_IDMA2MEM_7_SIZE 0x0a3c +#define MV64x60_IDMA2MEM_ACC_PROT_0 0x0a70 +#define MV64x60_IDMA2MEM_ACC_PROT_1 0x0a74 +#define MV64x60_IDMA2MEM_ACC_PROT_2 0x0a78 +#define MV64x60_IDMA2MEM_ACC_PROT_3 0x0a7c + +#define MV64x60_PCI_ACC_CNTL_WINDOWS 6 +#define MV64x60_PCI0_PCI_DECODE_CNTL 0x0d3c +#define MV64x60_PCI1_PCI_DECODE_CNTL 0x0dbc + +#define MV64x60_PCI0_BAR_ENABLE 0x0c3c +#define MV64x60_PCI02MEM_0_SIZE 0x0c08 +#define MV64x60_PCI0_ACC_CNTL_0_BASE_LO 0x1e00 +#define MV64x60_PCI0_ACC_CNTL_0_BASE_HI 0x1e04 +#define MV64x60_PCI0_ACC_CNTL_0_SIZE 0x1e08 +#define MV64x60_PCI0_ACC_CNTL_1_BASE_LO 0x1e10 +#define MV64x60_PCI0_ACC_CNTL_1_BASE_HI 0x1e14 +#define MV64x60_PCI0_ACC_CNTL_1_SIZE 0x1e18 +#define MV64x60_PCI0_ACC_CNTL_2_BASE_LO 0x1e20 +#define MV64x60_PCI0_ACC_CNTL_2_BASE_HI 0x1e24 +#define MV64x60_PCI0_ACC_CNTL_2_SIZE 0x1e28 +#define MV64x60_PCI0_ACC_CNTL_3_BASE_LO 0x1e30 +#define MV64x60_PCI0_ACC_CNTL_3_BASE_HI 0x1e34 +#define MV64x60_PCI0_ACC_CNTL_3_SIZE 0x1e38 +#define MV64x60_PCI0_ACC_CNTL_4_BASE_LO 0x1e40 +#define MV64x60_PCI0_ACC_CNTL_4_BASE_HI 0x1e44 +#define MV64x60_PCI0_ACC_CNTL_4_SIZE 0x1e48 +#define MV64x60_PCI0_ACC_CNTL_5_BASE_LO 0x1e50 +#define MV64x60_PCI0_ACC_CNTL_5_BASE_HI 0x1e54 +#define MV64x60_PCI0_ACC_CNTL_5_SIZE 0x1e58 + +#define MV64x60_PCI1_BAR_ENABLE 0x0cbc +#define MV64x60_PCI12MEM_0_SIZE 0x0c88 +#define MV64x60_PCI1_ACC_CNTL_0_BASE_LO 0x1e80 +#define MV64x60_PCI1_ACC_CNTL_0_BASE_HI 0x1e84 +#define MV64x60_PCI1_ACC_CNTL_0_SIZE 0x1e88 +#define MV64x60_PCI1_ACC_CNTL_1_BASE_LO 0x1e90 +#define MV64x60_PCI1_ACC_CNTL_1_BASE_HI 0x1e94 +#define MV64x60_PCI1_ACC_CNTL_1_SIZE 0x1e98 +#define MV64x60_PCI1_ACC_CNTL_2_BASE_LO 0x1ea0 +#define MV64x60_PCI1_ACC_CNTL_2_BASE_HI 0x1ea4 +#define MV64x60_PCI1_ACC_CNTL_2_SIZE 0x1ea8 +#define MV64x60_PCI1_ACC_CNTL_3_BASE_LO 0x1eb0 +#define MV64x60_PCI1_ACC_CNTL_3_BASE_HI 0x1eb4 +#define MV64x60_PCI1_ACC_CNTL_3_SIZE 0x1eb8 +#define MV64x60_PCI1_ACC_CNTL_4_BASE_LO 0x1ec0 +#define MV64x60_PCI1_ACC_CNTL_4_BASE_HI 0x1ec4 +#define MV64x60_PCI1_ACC_CNTL_4_SIZE 0x1ec8 +#define MV64x60_PCI1_ACC_CNTL_5_BASE_LO 0x1ed0 +#define MV64x60_PCI1_ACC_CNTL_5_BASE_HI 0x1ed4 +#define MV64x60_PCI1_ACC_CNTL_5_SIZE 0x1ed8 + +#define MV64x60_CPU2PCI_SWAP_NONE 0x01000000 + +#define MV64x60_CPU2PCI0_IO_BASE 0x0048 +#define MV64x60_CPU2PCI0_IO_SIZE 0x0050 +#define MV64x60_CPU2PCI0_IO_REMAP 0x00f0 +#define MV64x60_CPU2PCI0_MEM_0_BASE 0x0058 +#define MV64x60_CPU2PCI0_MEM_0_SIZE 0x0060 +#define MV64x60_CPU2PCI0_MEM_0_REMAP_LO 0x00f8 +#define MV64x60_CPU2PCI0_MEM_0_REMAP_HI 0x0320 + +#define MV64x60_CPU2PCI1_IO_BASE 0x0090 +#define MV64x60_CPU2PCI1_IO_SIZE 0x0098 +#define MV64x60_CPU2PCI1_IO_REMAP 0x0108 +#define MV64x60_CPU2PCI1_MEM_0_BASE 0x00a0 +#define MV64x60_CPU2PCI1_MEM_0_SIZE 0x00a8 +#define MV64x60_CPU2PCI1_MEM_0_REMAP_LO 0x0110 +#define MV64x60_CPU2PCI1_MEM_0_REMAP_HI 0x0340 + +struct mv64x60_mem_win { + u32 hi; + u32 lo; + u32 size; +}; + +struct mv64x60_pci_win { + u32 fcn; + u32 hi; + u32 lo; + u32 size; +}; + +/* PCI config access routines */ +struct { + u32 addr; + u32 data; +} static mv64x60_pci_cfgio[2] = { + { /* hose 0 */ + .addr = 0xcf8, + .data = 0xcfc, + }, + { /* hose 1 */ + .addr = 0xc78, + .data = 0xc7c, + } +}; + +u32 mv64x60_cfg_read(u8 *bridge_base, u8 hose, u8 bus, u8 devfn, u8 offset) +{ + out_le32((u32 *)(bridge_base + mv64x60_pci_cfgio[hose].addr), + (1 << 31) | (bus << 16) | (devfn << 8) | offset); + return in_le32((u32 *)(bridge_base + mv64x60_pci_cfgio[hose].data)); +} + +void mv64x60_cfg_write(u8 *bridge_base, u8 hose, u8 bus, u8 devfn, u8 offset, + u32 val) +{ + out_le32((u32 *)(bridge_base + mv64x60_pci_cfgio[hose].addr), + (1 << 31) | (bus << 16) | (devfn << 8) | offset); + out_le32((u32 *)(bridge_base + mv64x60_pci_cfgio[hose].data), val); +} + +/* I/O ctlr -> system memory setup */ +static struct mv64x60_mem_win mv64x60_cpu2mem[MV64x60_CPU2MEM_WINDOWS] = { + { + .lo = MV64x60_CPU2MEM_0_BASE, + .size = MV64x60_CPU2MEM_0_SIZE, + }, + { + .lo = MV64x60_CPU2MEM_1_BASE, + .size = MV64x60_CPU2MEM_1_SIZE, + }, + { + .lo = MV64x60_CPU2MEM_2_BASE, + .size = MV64x60_CPU2MEM_2_SIZE, + }, + { + .lo = MV64x60_CPU2MEM_3_BASE, + .size = MV64x60_CPU2MEM_3_SIZE, + }, +}; + +static struct mv64x60_mem_win mv64x60_enet2mem[MV64x60_CPU2MEM_WINDOWS] = { + { + .lo = MV64x60_ENET2MEM_0_BASE, + .size = MV64x60_ENET2MEM_0_SIZE, + }, + { + .lo = MV64x60_ENET2MEM_1_BASE, + .size = MV64x60_ENET2MEM_1_SIZE, + }, + { + .lo = MV64x60_ENET2MEM_2_BASE, + .size = MV64x60_ENET2MEM_2_SIZE, + }, + { + .lo = MV64x60_ENET2MEM_3_BASE, + .size = MV64x60_ENET2MEM_3_SIZE, + }, +}; + +static struct mv64x60_mem_win mv64x60_mpsc2mem[MV64x60_CPU2MEM_WINDOWS] = { + { + .lo = MV64x60_MPSC2MEM_0_BASE, + .size = MV64x60_MPSC2MEM_0_SIZE, + }, + { + .lo = MV64x60_MPSC2MEM_1_BASE, + .size = MV64x60_MPSC2MEM_1_SIZE, + }, + { + .lo = MV64x60_MPSC2MEM_2_BASE, + .size = MV64x60_MPSC2MEM_2_SIZE, + }, + { + .lo = MV64x60_MPSC2MEM_3_BASE, + .size = MV64x60_MPSC2MEM_3_SIZE, + }, +}; + +static struct mv64x60_mem_win mv64x60_idma2mem[MV64x60_CPU2MEM_WINDOWS] = { + { + .lo = MV64x60_IDMA2MEM_0_BASE, + .size = MV64x60_IDMA2MEM_0_SIZE, + }, + { + .lo = MV64x60_IDMA2MEM_1_BASE, + .size = MV64x60_IDMA2MEM_1_SIZE, + }, + { + .lo = MV64x60_IDMA2MEM_2_BASE, + .size = MV64x60_IDMA2MEM_2_SIZE, + }, + { + .lo = MV64x60_IDMA2MEM_3_BASE, + .size = MV64x60_IDMA2MEM_3_SIZE, + }, +}; + +static u32 mv64x60_dram_selects[MV64x60_CPU2MEM_WINDOWS] = {0xe,0xd,0xb,0x7}; + +/* + * ENET, MPSC, and IDMA ctlrs on the MV64x60 have separate windows that + * must be set up so that the respective ctlr can access system memory. + * Configure them to be same as cpu->memory windows. + */ +void mv64x60_config_ctlr_windows(u8 *bridge_base, u8 *bridge_pbase, + u8 is_coherent) +{ + u32 i, base, size, enables, prot = 0, snoop_bits = 0; + + /* Disable ctlr->mem windows */ + out_le32((u32 *)(bridge_base + MV64x60_ENET2MEM_BAR_ENABLE), 0x3f); + out_le32((u32 *)(bridge_base + MV64x60_MPSC2MEM_BAR_ENABLE), 0xf); + out_le32((u32 *)(bridge_base + MV64x60_ENET2MEM_BAR_ENABLE), 0xff); + + if (is_coherent) + snoop_bits = 0x2 << 12; /* Writeback */ + + enables = in_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE)) & 0xf; + + for (i=0; ibridge's reg window to the bridge's internal registers. */ + out_le32((u32 *)(bridge_base + MV64x60_MPSC2REGS_BASE), + (u32)bridge_pbase); + + out_le32((u32 *)(bridge_base + MV64x60_ENET2MEM_BAR_ENABLE), enables); + out_le32((u32 *)(bridge_base + MV64x60_MPSC2MEM_BAR_ENABLE), enables); + out_le32((u32 *)(bridge_base + MV64x60_IDMA2MEM_BAR_ENABLE), enables); +} + +/* PCI MEM -> system memory, et. al. setup */ +static struct mv64x60_pci_win mv64x60_pci2mem[2] = { + { /* hose 0 */ + .fcn = 0, + .hi = 0x14, + .lo = 0x10, + .size = MV64x60_PCI02MEM_0_SIZE, + }, + { /* hose 1 */ + .fcn = 0, + .hi = 0x94, + .lo = 0x90, + .size = MV64x60_PCI12MEM_0_SIZE, + }, +}; + +static struct +mv64x60_mem_win mv64x60_pci_acc[2][MV64x60_PCI_ACC_CNTL_WINDOWS] = { + { /* hose 0 */ + { + .hi = MV64x60_PCI0_ACC_CNTL_0_BASE_HI, + .lo = MV64x60_PCI0_ACC_CNTL_0_BASE_LO, + .size = MV64x60_PCI0_ACC_CNTL_0_SIZE, + }, + { + .hi = MV64x60_PCI0_ACC_CNTL_1_BASE_HI, + .lo = MV64x60_PCI0_ACC_CNTL_1_BASE_LO, + .size = MV64x60_PCI0_ACC_CNTL_1_SIZE, + }, + { + .hi = MV64x60_PCI0_ACC_CNTL_2_BASE_HI, + .lo = MV64x60_PCI0_ACC_CNTL_2_BASE_LO, + .size = MV64x60_PCI0_ACC_CNTL_2_SIZE, + }, + { + .hi = MV64x60_PCI0_ACC_CNTL_3_BASE_HI, + .lo = MV64x60_PCI0_ACC_CNTL_3_BASE_LO, + .size = MV64x60_PCI0_ACC_CNTL_3_SIZE, + }, + }, + { /* hose 1 */ + { + .hi = MV64x60_PCI1_ACC_CNTL_0_BASE_HI, + .lo = MV64x60_PCI1_ACC_CNTL_0_BASE_LO, + .size = MV64x60_PCI1_ACC_CNTL_0_SIZE, + }, + { + .hi = MV64x60_PCI1_ACC_CNTL_1_BASE_HI, + .lo = MV64x60_PCI1_ACC_CNTL_1_BASE_LO, + .size = MV64x60_PCI1_ACC_CNTL_1_SIZE, + }, + { + .hi = MV64x60_PCI1_ACC_CNTL_2_BASE_HI, + .lo = MV64x60_PCI1_ACC_CNTL_2_BASE_LO, + .size = MV64x60_PCI1_ACC_CNTL_2_SIZE, + }, + { + .hi = MV64x60_PCI1_ACC_CNTL_3_BASE_HI, + .lo = MV64x60_PCI1_ACC_CNTL_3_BASE_LO, + .size = MV64x60_PCI1_ACC_CNTL_3_SIZE, + }, + }, +}; + +static struct mv64x60_mem_win mv64x60_pci2reg[2] = { + { + .hi = 0x24, + .lo = 0x20, + .size = 0, + }, + { + .hi = 0xa4, + .lo = 0xa0, + .size = 0, + }, +}; + +/* Only need to use 1 window (per hose) to get access to all of system memory */ +void mv64x60_config_pci_windows(u8 *bridge_base, u8 *bridge_pbase, u8 hose, + u8 bus, u32 mem_size, u32 acc_bits) +{ + u32 i, offset, bar_enable, enables; + + /* Disable all windows but PCI MEM -> Bridge's regs window */ + enables = ~(1 << 9); + bar_enable = hose ? MV64x60_PCI1_BAR_ENABLE : MV64x60_PCI0_BAR_ENABLE; + out_le32((u32 *)(bridge_base + bar_enable), enables); + + for (i=0; i System Mem addr 0 */ + mv64x60_cfg_write(bridge_base, hose, bus, + PCI_DEVFN(0, mv64x60_pci2mem[hose].fcn), + mv64x60_pci2mem[hose].hi, 0); + mv64x60_cfg_write(bridge_base, hose, bus, + PCI_DEVFN(0, mv64x60_pci2mem[hose].fcn), + mv64x60_pci2mem[hose].lo, 0); + out_le32((u32 *)(bridge_base + mv64x60_pci2mem[hose].size),mem_size); + + acc_bits |= MV64x60_PCI_ACC_CNTL_ENABLE; + out_le32((u32 *)(bridge_base + mv64x60_pci_acc[hose][0].hi), 0); + out_le32((u32 *)(bridge_base + mv64x60_pci_acc[hose][0].lo), acc_bits); + out_le32((u32 *)(bridge_base + mv64x60_pci_acc[hose][0].size),mem_size); + + /* Set PCI MEM->bridge's reg window to where they are in CPU mem map */ + i = (u32)bridge_base; + i &= 0xffff0000; + i |= (0x2 << 1); + mv64x60_cfg_write(bridge_base, hose, bus, PCI_DEVFN(0,0), + mv64x60_pci2reg[hose].hi, 0); + mv64x60_cfg_write(bridge_base, hose, bus, PCI_DEVFN(0,0), + mv64x60_pci2reg[hose].lo, i); + + enables &= ~0x1; /* Enable PCI MEM -> System Mem window 0 */ + out_le32((u32 *)(bridge_base + bar_enable), enables); +} + +/* CPU -> PCI I/O & MEM setup */ +struct mv64x60_cpu2pci_win mv64x60_cpu2pci_io[2] = { + { /* hose 0 */ + .lo = MV64x60_CPU2PCI0_IO_BASE, + .size = MV64x60_CPU2PCI0_IO_SIZE, + .remap_hi = 0, + .remap_lo = MV64x60_CPU2PCI0_IO_REMAP, + }, + { /* hose 1 */ + .lo = MV64x60_CPU2PCI1_IO_BASE, + .size = MV64x60_CPU2PCI1_IO_SIZE, + .remap_hi = 0, + .remap_lo = MV64x60_CPU2PCI1_IO_REMAP, + }, +}; + +struct mv64x60_cpu2pci_win mv64x60_cpu2pci_mem[2] = { + { /* hose 0 */ + .lo = MV64x60_CPU2PCI0_MEM_0_BASE, + .size = MV64x60_CPU2PCI0_MEM_0_SIZE, + .remap_hi = MV64x60_CPU2PCI0_MEM_0_REMAP_HI, + .remap_lo = MV64x60_CPU2PCI0_MEM_0_REMAP_LO, + }, + { /* hose 1 */ + .lo = MV64x60_CPU2PCI1_MEM_0_BASE, + .size = MV64x60_CPU2PCI1_MEM_0_SIZE, + .remap_hi = MV64x60_CPU2PCI1_MEM_0_REMAP_HI, + .remap_lo = MV64x60_CPU2PCI1_MEM_0_REMAP_LO, + }, +}; + +/* Only need to set up 1 window to pci mem space */ +void mv64x60_config_cpu2pci_window(u8 *bridge_base, u8 hose, u32 pci_base_hi, + u32 pci_base_lo, u32 cpu_base, u32 size, + struct mv64x60_cpu2pci_win *offset_tbl) +{ + cpu_base >>= 16; + cpu_base |= MV64x60_CPU2PCI_SWAP_NONE; + out_le32((u32 *)(bridge_base + offset_tbl[hose].lo), cpu_base); + + if (offset_tbl[hose].remap_hi != 0) + out_le32((u32 *)(bridge_base + offset_tbl[hose].remap_hi), + pci_base_hi); + out_le32((u32 *)(bridge_base + offset_tbl[hose].remap_lo), + pci_base_lo >> 16); + + size = (size - 1) >> 16; + out_le32((u32 *)(bridge_base + offset_tbl[hose].size), size); +} + +/* Read mem ctlr to get the amount of mem in system */ +u32 mv64x60_get_mem_size(u8 *bridge_base) +{ + u32 enables, i, v; + u32 mem = 0; + + enables = in_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE)) & 0xf; + + for (i=0; i + * + * 2007 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#ifndef _PPC_BOOT_MV64x60_H_ +#define _PPC_BOOT_MV64x60_H_ + +#define MV64x60_CPU_BAR_ENABLE 0x0278 + +#define MV64x60_PCI_ACC_CNTL_ENABLE (1<<0) +#define MV64x60_PCI_ACC_CNTL_REQ64 (1<<1) +#define MV64x60_PCI_ACC_CNTL_SNOOP_NONE 0x00000000 +#define MV64x60_PCI_ACC_CNTL_SNOOP_WT 0x00000004 +#define MV64x60_PCI_ACC_CNTL_SNOOP_WB 0x00000008 +#define MV64x60_PCI_ACC_CNTL_SNOOP_MASK 0x0000000c +#define MV64x60_PCI_ACC_CNTL_ACCPROT (1<<4) +#define MV64x60_PCI_ACC_CNTL_WRPROT (1<<5) +#define MV64x60_PCI_ACC_CNTL_SWAP_BYTE 0x00000000 +#define MV64x60_PCI_ACC_CNTL_SWAP_NONE 0x00000040 +#define MV64x60_PCI_ACC_CNTL_SWAP_BYTE_WORD 0x00000080 +#define MV64x60_PCI_ACC_CNTL_SWAP_WORD 0x000000c0 +#define MV64x60_PCI_ACC_CNTL_SWAP_MASK 0x000000c0 +#define MV64x60_PCI_ACC_CNTL_MBURST_32_BYTES 0x00000000 +#define MV64x60_PCI_ACC_CNTL_MBURST_64_BYTES 0x00000100 +#define MV64x60_PCI_ACC_CNTL_MBURST_128_BYTES 0x00000200 +#define MV64x60_PCI_ACC_CNTL_MBURST_MASK 0x00000300 +#define MV64x60_PCI_ACC_CNTL_RDSIZE_32_BYTES 0x00000000 +#define MV64x60_PCI_ACC_CNTL_RDSIZE_64_BYTES 0x00000400 +#define MV64x60_PCI_ACC_CNTL_RDSIZE_128_BYTES 0x00000800 +#define MV64x60_PCI_ACC_CNTL_RDSIZE_256_BYTES 0x00000c00 +#define MV64x60_PCI_ACC_CNTL_RDSIZE_MASK 0x00000c00 + +struct mv64x60_cpu2pci_win { + u32 lo; + u32 size; + u32 remap_hi; + u32 remap_lo; +}; + +extern struct mv64x60_cpu2pci_win mv64x60_cpu2pci_io[2]; +extern struct mv64x60_cpu2pci_win mv64x60_cpu2pci_mem[2]; + +u32 mv64x60_cfg_read(u8 *bridge_base, u8 hose, u8 bus, u8 devfn, + u8 offset); +void mv64x60_cfg_write(u8 *bridge_base, u8 hose, u8 bus, u8 devfn, + u8 offset, u32 val); + +void mv64x60_config_ctlr_windows(u8 *bridge_base, u8 *bridge_pbase, + u8 is_coherent); +void mv64x60_config_pci_windows(u8 *bridge_base, u8 *bridge_pbase, u8 hose, + u8 bus, u32 mem_size, u32 acc_bits); +void mv64x60_config_cpu2pci_window(u8 *bridge_base, u8 hose, u32 pci_base_hi, + u32 pci_base_lo, u32 cpu_base, u32 size, + struct mv64x60_cpu2pci_win *offset_tbl); +u32 mv64x60_get_mem_size(u8 *bridge_base); +u8 *mv64x60_get_bridge_pbase(void); +u8 *mv64x60_get_bridge_base(void); +u8 mv64x60_is_coherent(void); + +int mv64x60_i2c_open(void); +int mv64x60_i2c_read(u32 devaddr, u8 *buf, u32 offset, u32 offset_size, + u32 count); +void mv64x60_i2c_close(void); + +#endif /* _PPC_BOOT_MV64x60_H_ */ diff --git a/arch/powerpc/boot/mv64x60_i2c.c b/arch/powerpc/boot/mv64x60_i2c.c new file mode 100644 index 0000000000000000000000000000000000000000..435fe85286801c7a6cb2037d66566316cb154b72 --- /dev/null +++ b/arch/powerpc/boot/mv64x60_i2c.c @@ -0,0 +1,206 @@ +/* + * Bootloader version of the i2c driver for the MV64x60. + * + * Author: Dale Farnsworth + * Maintained by: Mark A. Greer + * + * 2003, 2007 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express or + * implied. + */ + +#include +#include +#include "types.h" +#include "elf.h" +#include "page.h" +#include "string.h" +#include "stdio.h" +#include "io.h" +#include "ops.h" +#include "mv64x60.h" + +extern void udelay(long); + +/* Register defines */ +#define MV64x60_I2C_REG_SLAVE_ADDR 0x00 +#define MV64x60_I2C_REG_DATA 0x04 +#define MV64x60_I2C_REG_CONTROL 0x08 +#define MV64x60_I2C_REG_STATUS 0x0c +#define MV64x60_I2C_REG_BAUD 0x0c +#define MV64x60_I2C_REG_EXT_SLAVE_ADDR 0x10 +#define MV64x60_I2C_REG_SOFT_RESET 0x1c + +#define MV64x60_I2C_CONTROL_ACK 0x04 +#define MV64x60_I2C_CONTROL_IFLG 0x08 +#define MV64x60_I2C_CONTROL_STOP 0x10 +#define MV64x60_I2C_CONTROL_START 0x20 +#define MV64x60_I2C_CONTROL_TWSIEN 0x40 +#define MV64x60_I2C_CONTROL_INTEN 0x80 + +#define MV64x60_I2C_STATUS_BUS_ERR 0x00 +#define MV64x60_I2C_STATUS_MAST_START 0x08 +#define MV64x60_I2C_STATUS_MAST_REPEAT_START 0x10 +#define MV64x60_I2C_STATUS_MAST_WR_ADDR_ACK 0x18 +#define MV64x60_I2C_STATUS_MAST_WR_ADDR_NO_ACK 0x20 +#define MV64x60_I2C_STATUS_MAST_WR_ACK 0x28 +#define MV64x60_I2C_STATUS_MAST_WR_NO_ACK 0x30 +#define MV64x60_I2C_STATUS_MAST_LOST_ARB 0x38 +#define MV64x60_I2C_STATUS_MAST_RD_ADDR_ACK 0x40 +#define MV64x60_I2C_STATUS_MAST_RD_ADDR_NO_ACK 0x48 +#define MV64x60_I2C_STATUS_MAST_RD_DATA_ACK 0x50 +#define MV64x60_I2C_STATUS_MAST_RD_DATA_NO_ACK 0x58 +#define MV64x60_I2C_STATUS_MAST_WR_ADDR_2_ACK 0xd0 +#define MV64x60_I2C_STATUS_MAST_WR_ADDR_2_NO_ACK 0xd8 +#define MV64x60_I2C_STATUS_MAST_RD_ADDR_2_ACK 0xe0 +#define MV64x60_I2C_STATUS_MAST_RD_ADDR_2_NO_ACK 0xe8 +#define MV64x60_I2C_STATUS_NO_STATUS 0xf8 + +static u8 *ctlr_base; + +static int mv64x60_i2c_wait_for_status(int wanted) +{ + int i; + int status; + + for (i=0; i<1000; i++) { + udelay(10); + status = in_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_STATUS)) + & 0xff; + if (status == wanted) + return status; + } + return -status; +} + +static int mv64x60_i2c_control(int control, int status) +{ + out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_CONTROL), control & 0xff); + return mv64x60_i2c_wait_for_status(status); +} + +static int mv64x60_i2c_read_byte(int control, int status) +{ + out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_CONTROL), control & 0xff); + if (mv64x60_i2c_wait_for_status(status) < 0) + return -1; + return in_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_DATA)) & 0xff; +} + +static int mv64x60_i2c_write_byte(int data, int control, int status) +{ + out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_DATA), data & 0xff); + out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_CONTROL), control & 0xff); + return mv64x60_i2c_wait_for_status(status); +} + +int mv64x60_i2c_read(u32 devaddr, u8 *buf, u32 offset, u32 offset_size, + u32 count) +{ + int i; + int data; + int control; + int status; + + if (ctlr_base == NULL) + return -1; + + /* send reset */ + out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_SOFT_RESET), 0); + out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_SLAVE_ADDR), 0); + out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_EXT_SLAVE_ADDR), 0); + out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_BAUD), (4 << 3) | 0x4); + + if (mv64x60_i2c_control(MV64x60_I2C_CONTROL_TWSIEN, + MV64x60_I2C_STATUS_NO_STATUS) < 0) + return -1; + + /* send start */ + control = MV64x60_I2C_CONTROL_START | MV64x60_I2C_CONTROL_TWSIEN; + status = MV64x60_I2C_STATUS_MAST_START; + if (mv64x60_i2c_control(control, status) < 0) + return -1; + + /* select device for writing */ + data = devaddr & ~0x1; + control = MV64x60_I2C_CONTROL_TWSIEN; + status = MV64x60_I2C_STATUS_MAST_WR_ADDR_ACK; + if (mv64x60_i2c_write_byte(data, control, status) < 0) + return -1; + + /* send offset of data */ + control = MV64x60_I2C_CONTROL_TWSIEN; + status = MV64x60_I2C_STATUS_MAST_WR_ACK; + if (offset_size > 1) { + if (mv64x60_i2c_write_byte(offset >> 8, control, status) < 0) + return -1; + } + if (mv64x60_i2c_write_byte(offset, control, status) < 0) + return -1; + + /* resend start */ + control = MV64x60_I2C_CONTROL_START | MV64x60_I2C_CONTROL_TWSIEN; + status = MV64x60_I2C_STATUS_MAST_REPEAT_START; + if (mv64x60_i2c_control(control, status) < 0) + return -1; + + /* select device for reading */ + data = devaddr | 0x1; + control = MV64x60_I2C_CONTROL_TWSIEN; + status = MV64x60_I2C_STATUS_MAST_RD_ADDR_ACK; + if (mv64x60_i2c_write_byte(data, control, status) < 0) + return -1; + + /* read all but last byte of data */ + control = MV64x60_I2C_CONTROL_ACK | MV64x60_I2C_CONTROL_TWSIEN; + status = MV64x60_I2C_STATUS_MAST_RD_DATA_ACK; + + for (i=1; i + * + * 2007 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#include +#include +#include "types.h" +#include "elf.h" +#include "page.h" +#include "string.h" +#include "stdio.h" +#include "io.h" +#include "ops.h" +#include "gunzip_util.h" +#include "mv64x60.h" + +extern char _end[]; +extern char _vmlinux_start[], _vmlinux_end[]; +extern char _dtb_start[], _dtb_end[]; + +extern void udelay(long delay); + +#define KB 1024U +#define MB (KB*KB) +#define GB (KB*MB) +#define MHz (1000U*1000U) +#define GHz (1000U*MHz) + +#define BOARD_MODEL "PrPMC2800" +#define BOARD_MODEL_MAX 32 /* max strlen(BOARD_MODEL) + 1 */ + +#define EEPROM2_ADDR 0xa4 +#define EEPROM3_ADDR 0xa8 + +BSS_STACK(16*KB); + +static u8 *bridge_base; + +typedef enum { + BOARD_MODEL_PRPMC280, + BOARD_MODEL_PRPMC2800, +} prpmc2800_board_model; + +typedef enum { + BRIDGE_TYPE_MV64360, + BRIDGE_TYPE_MV64362, +} prpmc2800_bridge_type; + +struct prpmc2800_board_info { + prpmc2800_board_model model; + char variant; + prpmc2800_bridge_type bridge_type; + u8 subsys0; + u8 subsys1; + u8 vpd4; + u8 vpd4_mask; + u32 core_speed; + u32 mem_size; + u32 boot_flash; + u32 user_flash; +}; + +static struct prpmc2800_board_info prpmc2800_board_info[] = { + { + .model = BOARD_MODEL_PRPMC280, + .variant = 'a', + .bridge_type = BRIDGE_TYPE_MV64360, + .subsys0 = 0xff, + .subsys1 = 0xff, + .vpd4 = 0x00, + .vpd4_mask = 0x0f, + .core_speed = 1*GHz, + .mem_size = 512*MB, + .boot_flash = 1*MB, + .user_flash = 64*MB, + }, + { + .model = BOARD_MODEL_PRPMC280, + .variant = 'b', + .bridge_type = BRIDGE_TYPE_MV64362, + .subsys0 = 0xff, + .subsys1 = 0xff, + .vpd4 = 0x01, + .vpd4_mask = 0x0f, + .core_speed = 1*GHz, + .mem_size = 512*MB, + .boot_flash = 0, + .user_flash = 0, + }, + { + .model = BOARD_MODEL_PRPMC280, + .variant = 'c', + .bridge_type = BRIDGE_TYPE_MV64360, + .subsys0 = 0xff, + .subsys1 = 0xff, + .vpd4 = 0x02, + .vpd4_mask = 0x0f, + .core_speed = 733*MHz, + .mem_size = 512*MB, + .boot_flash = 1*MB, + .user_flash = 64*MB, + }, + { + .model = BOARD_MODEL_PRPMC280, + .variant = 'd', + .bridge_type = BRIDGE_TYPE_MV64360, + .subsys0 = 0xff, + .subsys1 = 0xff, + .vpd4 = 0x03, + .vpd4_mask = 0x0f, + .core_speed = 1*GHz, + .mem_size = 1*GB, + .boot_flash = 1*MB, + .user_flash = 64*MB, + }, + { + .model = BOARD_MODEL_PRPMC280, + .variant = 'e', + .bridge_type = BRIDGE_TYPE_MV64360, + .subsys0 = 0xff, + .subsys1 = 0xff, + .vpd4 = 0x04, + .vpd4_mask = 0x0f, + .core_speed = 1*GHz, + .mem_size = 512*MB, + .boot_flash = 1*MB, + .user_flash = 64*MB, + }, + { + .model = BOARD_MODEL_PRPMC280, + .variant = 'f', + .bridge_type = BRIDGE_TYPE_MV64362, + .subsys0 = 0xff, + .subsys1 = 0xff, + .vpd4 = 0x05, + .vpd4_mask = 0x0f, + .core_speed = 733*MHz, + .mem_size = 128*MB, + .boot_flash = 1*MB, + .user_flash = 0, + }, + { + .model = BOARD_MODEL_PRPMC280, + .variant = 'g', + .bridge_type = BRIDGE_TYPE_MV64360, + .subsys0 = 0xff, + .subsys1 = 0xff, + .vpd4 = 0x06, + .vpd4_mask = 0x0f, + .core_speed = 1*GHz, + .mem_size = 256*MB, + .boot_flash = 1*MB, + .user_flash = 0, + }, + { + .model = BOARD_MODEL_PRPMC280, + .variant = 'h', + .bridge_type = BRIDGE_TYPE_MV64360, + .subsys0 = 0xff, + .subsys1 = 0xff, + .vpd4 = 0x07, + .vpd4_mask = 0x0f, + .core_speed = 1*GHz, + .mem_size = 1*GB, + .boot_flash = 1*MB, + .user_flash = 64*MB, + }, + { + .model = BOARD_MODEL_PRPMC2800, + .variant = 'a', + .bridge_type = BRIDGE_TYPE_MV64360, + .subsys0 = 0xb2, + .subsys1 = 0x8c, + .vpd4 = 0x00, + .vpd4_mask = 0x00, + .core_speed = 1*GHz, + .mem_size = 512*MB, + .boot_flash = 2*MB, + .user_flash = 64*MB, + }, + { + .model = BOARD_MODEL_PRPMC2800, + .variant = 'b', + .bridge_type = BRIDGE_TYPE_MV64362, + .subsys0 = 0xb2, + .subsys1 = 0x8d, + .vpd4 = 0x00, + .vpd4_mask = 0x00, + .core_speed = 1*GHz, + .mem_size = 512*MB, + .boot_flash = 0, + .user_flash = 0, + }, + { + .model = BOARD_MODEL_PRPMC2800, + .variant = 'c', + .bridge_type = BRIDGE_TYPE_MV64360, + .subsys0 = 0xb2, + .subsys1 = 0x8e, + .vpd4 = 0x00, + .vpd4_mask = 0x00, + .core_speed = 733*MHz, + .mem_size = 512*MB, + .boot_flash = 2*MB, + .user_flash = 64*MB, + }, + { + .model = BOARD_MODEL_PRPMC2800, + .variant = 'd', + .bridge_type = BRIDGE_TYPE_MV64360, + .subsys0 = 0xb2, + .subsys1 = 0x8f, + .vpd4 = 0x00, + .vpd4_mask = 0x00, + .core_speed = 1*GHz, + .mem_size = 1*GB, + .boot_flash = 2*MB, + .user_flash = 64*MB, + }, + { + .model = BOARD_MODEL_PRPMC2800, + .variant = 'e', + .bridge_type = BRIDGE_TYPE_MV64360, + .subsys0 = 0xa2, + .subsys1 = 0x8a, + .vpd4 = 0x00, + .vpd4_mask = 0x00, + .core_speed = 1*GHz, + .mem_size = 512*MB, + .boot_flash = 2*MB, + .user_flash = 64*MB, + }, + { + .model = BOARD_MODEL_PRPMC2800, + .variant = 'f', + .bridge_type = BRIDGE_TYPE_MV64362, + .subsys0 = 0xa2, + .subsys1 = 0x8b, + .vpd4 = 0x00, + .vpd4_mask = 0x00, + .core_speed = 733*MHz, + .mem_size = 128*MB, + .boot_flash = 2*MB, + .user_flash = 0, + }, + { + .model = BOARD_MODEL_PRPMC2800, + .variant = 'g', + .bridge_type = BRIDGE_TYPE_MV64360, + .subsys0 = 0xa2, + .subsys1 = 0x8c, + .vpd4 = 0x00, + .vpd4_mask = 0x00, + .core_speed = 1*GHz, + .mem_size = 2*GB, + .boot_flash = 2*MB, + .user_flash = 64*MB, + }, + { + .model = BOARD_MODEL_PRPMC2800, + .variant = 'h', + .bridge_type = BRIDGE_TYPE_MV64360, + .subsys0 = 0xa2, + .subsys1 = 0x8d, + .vpd4 = 0x00, + .vpd4_mask = 0x00, + .core_speed = 733*MHz, + .mem_size = 1*GB, + .boot_flash = 2*MB, + .user_flash = 64*MB, + }, +}; + +static struct prpmc2800_board_info *prpmc2800_get_board_info(u8 *vpd) +{ + struct prpmc2800_board_info *bip; + int i; + + for (i=0,bip=prpmc2800_board_info; isubsys0) && (vpd[1] == bip->subsys1) + && ((vpd[4] & bip->vpd4_mask) == bip->vpd4)) + return bip; + + return NULL; +} + +/* Get VPD from i2c eeprom 2, then match it to a board info entry */ +static struct prpmc2800_board_info *prpmc2800_get_bip(void) +{ + struct prpmc2800_board_info *bip; + u8 vpd[5]; + int rc; + + if (mv64x60_i2c_open()) + fatal("Error: Can't open i2c device\n\r"); + + /* Get VPD from i2c eeprom-2 */ + memset(vpd, 0, sizeof(vpd)); + rc = mv64x60_i2c_read(EEPROM2_ADDR, vpd, 0x1fde, 2, sizeof(vpd)); + if (rc < 0) + fatal("Error: Couldn't read eeprom2\n\r"); + mv64x60_i2c_close(); + + /* Get board type & related info */ + bip = prpmc2800_get_board_info(vpd); + if (bip == NULL) { + printf("Error: Unsupported board or corrupted VPD:\n\r"); + printf(" 0x%x 0x%x 0x%x 0x%x 0x%x\n\r", + vpd[0], vpd[1], vpd[2], vpd[3], vpd[4]); + printf("Using device tree defaults...\n\r"); + } + + return bip; +} + +static void prpmc2800_bridge_setup(u32 mem_size) +{ + u32 i, v[12], enables, acc_bits; + u32 pci_base_hi, pci_base_lo, size, buf[2]; + unsigned long cpu_base; + int rc; + void *devp; + u8 *bridge_pbase, is_coherent; + struct mv64x60_cpu2pci_win *tbl; + + bridge_pbase = mv64x60_get_bridge_pbase(); + is_coherent = mv64x60_is_coherent(); + + if (is_coherent) + acc_bits = MV64x60_PCI_ACC_CNTL_SNOOP_WB + | MV64x60_PCI_ACC_CNTL_SWAP_NONE + | MV64x60_PCI_ACC_CNTL_MBURST_32_BYTES + | MV64x60_PCI_ACC_CNTL_RDSIZE_32_BYTES; + else + acc_bits = MV64x60_PCI_ACC_CNTL_SNOOP_NONE + | MV64x60_PCI_ACC_CNTL_SWAP_NONE + | MV64x60_PCI_ACC_CNTL_MBURST_128_BYTES + | MV64x60_PCI_ACC_CNTL_RDSIZE_256_BYTES; + + mv64x60_config_ctlr_windows(bridge_base, bridge_pbase, is_coherent); + mv64x60_config_pci_windows(bridge_base, bridge_pbase, 0, 0, mem_size, + acc_bits); + + /* Get the cpu -> pci i/o & mem mappings from the device tree */ + devp = finddevice("/mv64x60/pci@80000000"); + if (devp == NULL) + fatal("Error: Missing /mv64x60/pci@80000000" + " device tree node\n\r"); + + rc = getprop(devp, "ranges", v, sizeof(v)); + if (rc != sizeof(v)) + fatal("Error: Can't find /mv64x60/pci@80000000/ranges" + " property\n\r"); + + /* Get the cpu -> pci i/o & mem mappings from the device tree */ + devp = finddevice("/mv64x60"); + if (devp == NULL) + fatal("Error: Missing /mv64x60 device tree node\n\r"); + + enables = in_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE)); + enables |= 0x0007fe00; /* Disable all cpu->pci windows */ + out_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE), enables); + + for (i=0; i<12; i+=6) { + switch (v[i] & 0xff000000) { + case 0x01000000: /* PCI I/O Space */ + tbl = mv64x60_cpu2pci_io; + break; + case 0x02000000: /* PCI MEM Space */ + tbl = mv64x60_cpu2pci_mem; + break; + default: + continue; + } + + pci_base_hi = v[i+1]; + pci_base_lo = v[i+2]; + cpu_base = v[i+3]; + size = v[i+5]; + + buf[0] = cpu_base; + buf[1] = size; + + if (!dt_xlate_addr(devp, buf, sizeof(buf), &cpu_base)) + fatal("Error: Can't translate PCI address 0x%x\n\r", + (u32)cpu_base); + + mv64x60_config_cpu2pci_window(bridge_base, 0, pci_base_hi, + pci_base_lo, cpu_base, size, tbl); + } + + enables &= ~0x00000600; /* Enable cpu->pci0 i/o, cpu->pci0 mem0 */ + out_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE), enables); +} + +static void prpmc2800_fixups(void) +{ + u32 v[2], l, mem_size; + int rc; + void *devp; + char model[BOARD_MODEL_MAX]; + struct prpmc2800_board_info *bip; + + bip = prpmc2800_get_bip(); /* Get board info based on VPD */ + + mem_size = (bip) ? bip->mem_size : mv64x60_get_mem_size(bridge_base); + prpmc2800_bridge_setup(mem_size); /* Do necessary bridge setup */ + + /* If the VPD doesn't match what we know about, just use the + * defaults already in the device tree. + */ + if (!bip) + return; + + /* Know the board type so override device tree defaults */ + /* Set /model appropriately */ + devp = finddevice("/"); + if (devp == NULL) + fatal("Error: Missing '/' device tree node\n\r"); + memset(model, 0, BOARD_MODEL_MAX); + strncpy(model, BOARD_MODEL, BOARD_MODEL_MAX - 2); + l = strlen(model); + if (bip->model == BOARD_MODEL_PRPMC280) + l--; + model[l++] = bip->variant; + model[l++] = '\0'; + setprop(devp, "model", model, l); + + /* Set /cpus/PowerPC,7447/clock-frequency */ + devp = finddevice("/cpus/PowerPC,7447"); + if (devp == NULL) + fatal("Error: Missing proper /cpus device tree node\n\r"); + v[0] = bip->core_speed; + setprop(devp, "clock-frequency", &v[0], sizeof(v[0])); + + /* Set /memory/reg size */ + devp = finddevice("/memory"); + if (devp == NULL) + fatal("Error: Missing /memory device tree node\n\r"); + v[0] = 0; + v[1] = bip->mem_size; + setprop(devp, "reg", v, sizeof(v)); + + /* Update /mv64x60/model, if this is a mv64362 */ + if (bip->bridge_type == BRIDGE_TYPE_MV64362) { + devp = finddevice("/mv64x60"); + if (devp == NULL) + fatal("Error: Missing /mv64x60 device tree node\n\r"); + setprop(devp, "model", "mv64362", strlen("mv64362") + 1); + } + + /* Set User FLASH size */ + devp = finddevice("/mv64x60/flash@a0000000"); + if (devp == NULL) + fatal("Error: Missing User FLASH device tree node\n\r"); + rc = getprop(devp, "reg", v, sizeof(v)); + if (rc != sizeof(v)) + fatal("Error: Can't find User FLASH reg property\n\r"); + v[1] = bip->user_flash; + setprop(devp, "reg", v, sizeof(v)); +} + +#define MV64x60_MPP_CNTL_0 0xf000 +#define MV64x60_MPP_CNTL_2 0xf008 +#define MV64x60_GPP_IO_CNTL 0xf100 +#define MV64x60_GPP_LEVEL_CNTL 0xf110 +#define MV64x60_GPP_VALUE_SET 0xf118 + +static void prpmc2800_reset(void) +{ + u32 temp; + + udelay(5000000); + + if (bridge_base != 0) { + temp = in_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_0)); + temp &= 0xFFFF0FFF; + out_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_0), temp); + + temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL)); + temp |= 0x00000004; + out_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL), temp); + + temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL)); + temp |= 0x00000004; + out_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL), temp); + + temp = in_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_2)); + temp &= 0xFFFF0FFF; + out_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_2), temp); + + temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL)); + temp |= 0x00080000; + out_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL), temp); + + temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL)); + temp |= 0x00080000; + out_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL), temp); + + out_le32((u32 *)(bridge_base + MV64x60_GPP_VALUE_SET), + 0x00080004); + } + + for (;;); +} + +#define HEAP_SIZE (16*MB) +static struct gunzip_state gzstate; + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + struct elf_info ei; + char *heap_start, *dtb; + int dt_size = _dtb_end - _dtb_start; + void *vmlinuz_addr = _vmlinux_start; + unsigned long vmlinuz_size = _vmlinux_end - _vmlinux_start; + char elfheader[256]; + + if (dt_size <= 0) /* No fdt */ + exit(); + + /* + * Start heap after end of the kernel (after decompressed to + * address 0) or the end of the zImage, whichever is higher. + * That's so things allocated by simple_alloc won't overwrite + * any part of the zImage and the kernel won't overwrite the dtb + * when decompressed & relocated. + */ + gunzip_start(&gzstate, vmlinuz_addr, vmlinuz_size); + gunzip_exactly(&gzstate, elfheader, sizeof(elfheader)); + + if (!parse_elf32(elfheader, &ei)) + exit(); + + heap_start = (char *)(ei.memsize + ei.elfoffset); /* end of kernel*/ + heap_start = max(heap_start, (char *)_end); /* end of zImage */ + + if ((unsigned)simple_alloc_init(heap_start, HEAP_SIZE, 2*KB, 16) + > (128*MB)) + exit(); + + /* Relocate dtb to safe area past end of zImage & kernel */ + dtb = malloc(dt_size); + if (!dtb) + exit(); + memmove(dtb, _dtb_start, dt_size); + if (ft_init(dtb, dt_size, 16)) + exit(); + + bridge_base = mv64x60_get_bridge_base(); + + platform_ops.fixups = prpmc2800_fixups; + platform_ops.exit = prpmc2800_reset; + + if (serial_console_init() < 0) + exit(); +} + +/* _zimage_start called very early--need to turn off external interrupts */ +asm (" .globl _zimage_start\n\ + _zimage_start:\n\ + mfmsr 10\n\ + rlwinm 10,10,0,~(1<<15) /* Clear MSR_EE */\n\ + sync\n\ + mtmsr 10\n\ + isync\n\ + b _zimage_start_lib\n\ +"); diff --git a/arch/powerpc/boot/serial.c b/arch/powerpc/boot/serial.c index e8de4cf59be7e25db3ddd85989e03889bf2cf24b..7fd32330a9a5ae065da03b94db95b4c8efa8fdf8 100644 --- a/arch/powerpc/boot/serial.c +++ b/arch/powerpc/boot/serial.c @@ -125,6 +125,8 @@ int serial_console_init(void) if (!strcmp(compat, "ns16550")) rc = ns16550_console_init(devp, &serial_cd); + else if (!strcmp(compat, "marvell,mpsc")) + rc = mpsc_console_init(devp, &serial_cd); /* Add other serial console driver calls here */ diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig new file mode 100644 index 0000000000000000000000000000000000000000..c70a7308200746164a07766b3f89a272cdbd6db5 --- /dev/null +++ b/arch/powerpc/configs/prpmc2800_defconfig @@ -0,0 +1,1442 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.21 +# Wed May 9 09:42:46 2007 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +# CONFIG_PPC_UDBG_16550 is not set +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +# CONFIG_DEFAULT_UIMAGE is not set + +# +# Processor support +# +CONFIG_CLASSIC32=y +# CONFIG_PPC_82xx is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_86xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_6xx=y +CONFIG_PPC_FPU=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_ALTIVEC=y +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_PPC_MM_SLICES is not set +# CONFIG_SMP is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_CONFIG_CHECK_CACHE_COHERENCY=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Block layer +# +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Platform support +# +# CONFIG_PPC_MULTIPLATFORM is not set +CONFIG_EMBEDDED6xx=y +# CONFIG_APUS is not set +# CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +# CONFIG_LINKSTATION is not set +# CONFIG_MPC7448HPC2 is not set +# CONFIG_PPC_HOLLY is not set +CONFIG_PPC_PRPMC2800=y +CONFIG_MV64X60=y +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_TAU is not set +# CONFIG_CPM2 is not set + +# +# Kernel options +# +CONFIG_HIGHMEM=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +# CONFIG_KEXEC is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +# CONFIG_SECCOMP is not set +CONFIG_WANT_DEVICE_TREE=y +CONFIG_DEVICE_TREE="prpmc2800.dts" +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC_INDIRECT_PCI=y +# CONFIG_PPC_INDIRECT_PCI_BE is not set +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=131072 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_BLINK is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +# CONFIG_IDEPCI_SHARE_IRQ is not set +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +CONFIG_BLK_DEV_PDC202XX_NEW=y +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SL82C105 is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_ESP_CORE is not set +# CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +CONFIG_SATA_MV=y +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set +CONFIG_MACINTOSH_DRIVERS=y +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +CONFIG_8139TOO=y +# CONFIG_8139TOO_PIO is not set +# CONFIG_8139TOO_TUNE_TWISTER is not set +# CONFIG_8139TOO_8129 is not set +# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +CONFIG_E1000=y +# CONFIG_E1000_NAPI is not set +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_MV643XX_ETH=y +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_MPSC=y +CONFIG_SERIAL_MPSC_CONSOLE=y +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +CONFIG_I2C_MV64XXX=y + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_FB is not set +# CONFIG_FB_IBM_GXT4500 is not set + +# +# Console display driver support +# +CONFIG_VGA_CONSOLE=y +# CONFIG_VGACON_SOFT_SCROLLBACK is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_HCD_PPC_OF is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_STORAGE is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1672 is not set +CONFIG_RTC_DRV_MAX6900=y +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Auxiliary Display support +# + +# +# Virtualization +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set +# CONFIG_UCC_SLOW is not set +# CONFIG_UCC_FAST is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_BOOTX_TEXT is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig index fd604968f9a2b8afa636c62771716fb1941e8c16..477934558f06cb7cf153972fe099d4fa37fa4bc8 100644 --- a/arch/powerpc/configs/ps3_defconfig +++ b/arch/powerpc/configs/ps3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.21 -# Mon Apr 30 12:03:35 2007 +# Fri May 11 10:16:27 2007 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -40,6 +40,7 @@ CONFIG_PPC_FPU=y # CONFIG_PPC_OF_PLATFORM_PCI is not set CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y +# CONFIG_PPC_MM_SLICES is not set CONFIG_VIRT_CPU_ACCOUNTING=y CONFIG_SMP=y CONFIG_NR_CPUS=2 @@ -67,6 +68,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 # CONFIG_CPUSETS is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set @@ -87,12 +89,13 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set # # Loadable module support @@ -213,6 +216,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_ARCH_MEMORY_PROBE=y +# CONFIG_PPC_HAS_HASH_64K is not set # CONFIG_PPC_64K_PAGES is not set # CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y @@ -229,15 +233,12 @@ CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y # CONFIG_PCI is not set # CONFIG_PCI_DOMAINS is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# CONFIG_KERNEL_START=0xc000000000000000 # @@ -363,7 +364,9 @@ CONFIG_BT_HCIUSB_SCO=y # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set # # Device Drivers @@ -414,6 +417,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # Misc devices # +# CONFIG_BLINK is not set # # ATA/ATAPI/MFM/RLL support @@ -447,6 +451,7 @@ CONFIG_CHR_DEV_SG=m # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -473,25 +478,7 @@ CONFIG_CHR_DEV_SG=m # Multi-device support (RAID and LVM) # # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Macintosh device drivers -# -# CONFIG_MAC_EMUMOUSEBTN is not set -# CONFIG_WINDFARM is not set +# CONFIG_MACINTOSH_DRIVERS is not set # # Network device support @@ -519,6 +506,7 @@ CONFIG_MII=m # # Ethernet (10000 Mbit) # +CONFIG_MLX4_DEBUG=y # # Token Ring devices @@ -530,6 +518,25 @@ CONFIG_MII=m # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +CONFIG_USB_PEGASUS=m +# CONFIG_USB_RTL8150 is not set +CONFIG_USB_USBNET_MII=m +CONFIG_USB_USBNET=m +# CONFIG_USB_NET_CDCETHER is not set +# CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_GL620A is not set +# CONFIG_USB_NET_NET1080 is not set +# CONFIG_USB_NET_PLUSB is not set +CONFIG_USB_NET_MCS7830=m +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +# CONFIG_USB_NET_ZAURUS is not set + # # Wan interfaces # @@ -575,6 +582,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -609,15 +617,10 @@ CONFIG_LEGACY_PTY_COUNT=16 # IPMI # # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HANGCHECK_TIMER is not set @@ -626,10 +629,6 @@ CONFIG_GEN_RTC=y # TPM devices # # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set # @@ -642,12 +641,7 @@ CONFIG_GEN_RTC=y # Dallas's 1-wire bus # # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# # CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set # # Multifunction device drivers @@ -669,12 +663,23 @@ CONFIG_GEN_RTC=y # Graphics support # # CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -702,10 +707,6 @@ CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y - -# -# Logo configuration -# CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set @@ -767,6 +768,20 @@ CONFIG_SND_VERBOSE_PROCFS=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# +# USB Input Devices +# +CONFIG_USB_HID=m +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set + # # USB support # @@ -826,57 +841,11 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_LIBUSUAL is not set -# -# USB Input Devices -# -CONFIG_USB_HID=m -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set -# CONFIG_USB_GTCO is not set - # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -CONFIG_USB_PEGASUS=m -# CONFIG_USB_RTL8150 is not set -CONFIG_USB_USBNET_MII=m -CONFIG_USB_USBNET=m -# CONFIG_USB_NET_CDCETHER is not set -# CONFIG_USB_NET_DM9601 is not set -# CONFIG_USB_NET_GL620A is not set -# CONFIG_USB_NET_NET1080 is not set -# CONFIG_USB_NET_PLUSB is not set -CONFIG_USB_NET_MCS7830=m -# CONFIG_USB_NET_RNDIS_HOST is not set -# CONFIG_USB_NET_CDC_SUBSET is not set -# CONFIG_USB_NET_ZAURUS is not set CONFIG_USB_MON=y # @@ -920,10 +889,6 @@ CONFIG_USB_MON=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set # @@ -965,14 +930,6 @@ CONFIG_USB_MON=y # DMA Devices # -# -# Auxiliary Display support -# - -# -# Virtualization -# - # # File systems # @@ -1071,6 +1028,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1148,11 +1106,13 @@ CONFIG_NLS_ISO8859_1=y CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y # # Instrumentation Support @@ -1171,7 +1131,6 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set -CONFIG_LOG_BUF_SHIFT=17 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1205,6 +1164,7 @@ CONFIG_PPC_EARLY_DEBUG=y # CONFIG_PPC_EARLY_DEBUG_ISERIES is not set # CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set # CONFIG_PPC_EARLY_DEBUG_BEAT is not set +# CONFIG_PPC_EARLY_DEBUG_44x is not set # # Security options @@ -1234,6 +1194,7 @@ CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c index b5c96af955c639ce43ea1532423bebebf0a6b177..3786dcc8a7b62752cc51ddd3fae9dd085a2b3726 100644 --- a/arch/powerpc/kernel/prom_parse.c +++ b/arch/powerpc/kernel/prom_parse.c @@ -24,7 +24,7 @@ /* Max address size we deal with */ #define OF_MAX_ADDR_CELLS 4 #define OF_CHECK_COUNTS(na, ns) ((na) > 0 && (na) <= OF_MAX_ADDR_CELLS && \ - (ns) > 0) + (ns) >= 0) static struct of_bus *of_match_bus(struct device_node *np); static int __of_address_to_resource(struct device_node *dev, diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 370803722e4773f9f69a09e8b2fa8d7ab8d3d3f0..ed07a198f8d665a9b9b90461cb48d464f57abd16 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -530,3 +530,44 @@ void __init setup_panic(void) { atomic_notifier_chain_register(&panic_notifier_list, &ppc_panic_block); } + +#ifdef CONFIG_CHECK_CACHE_COHERENCY +/* + * For platforms that have configurable cache-coherency. This function + * checks that the cache coherency setting of the kernel matches the setting + * left by the firmware, as indicated in the device tree. Since a mismatch + * will eventually result in DMA failures, we print * and error and call + * BUG() in that case. + */ + +#ifdef CONFIG_NOT_COHERENT_CACHE +#define KERNEL_COHERENCY 0 +#else +#define KERNEL_COHERENCY 1 +#endif + +static int __init check_cache_coherency(void) +{ + struct device_node *np; + const void *prop; + int devtree_coherency; + + np = of_find_node_by_path("/"); + prop = of_get_property(np, "coherency-off", NULL); + of_node_put(np); + + devtree_coherency = prop ? 0 : 1; + + if (devtree_coherency != KERNEL_COHERENCY) { + printk(KERN_ERR + "kernel coherency:%s != device tree_coherency:%s\n", + KERNEL_COHERENCY ? "on" : "off", + devtree_coherency ? "on" : "off"); + BUG(); + } + + return 0; +} + +late_initcall(check_cache_coherency); +#endif /* CONFIG_CHECK_CACHE_COHERENCY */ diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 7cedef8f5f70c2ae397c057746200a02da31f5cf..2c8564d54e4d009a67527463d1aa2a8c7f3f9d6f 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -711,30 +711,15 @@ void wakeup_decrementer(void) void __init smp_space_timers(unsigned int max_cpus) { int i; - unsigned long half = tb_ticks_per_jiffy / 2; - unsigned long offset = tb_ticks_per_jiffy / max_cpus; u64 previous_tb = per_cpu(last_jiffy, boot_cpuid); /* make sure tb > per_cpu(last_jiffy, cpu) for all cpus always */ previous_tb -= tb_ticks_per_jiffy; - /* - * The stolen time calculation for POWER5 shared-processor LPAR - * systems works better if the two threads' timebase interrupts - * are staggered by half a jiffy with respect to each other. - */ + for_each_possible_cpu(i) { if (i == boot_cpuid) continue; - if (i == (boot_cpuid ^ 1)) - per_cpu(last_jiffy, i) = - per_cpu(last_jiffy, boot_cpuid) - half; - else if (i & 1) - per_cpu(last_jiffy, i) = - per_cpu(last_jiffy, i ^ 1) + half; - else { - previous_tb += offset; - per_cpu(last_jiffy, i) = previous_tb; - } + per_cpu(last_jiffy, i) = previous_tb; } } #endif diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c index 7d722eea4ea8ba927850c54cc85aff990ed81727..4a20d890e2f45be63cba2ea465941407935d3b4b 100644 --- a/arch/powerpc/mm/hash_native_64.c +++ b/arch/powerpc/mm/hash_native_64.c @@ -351,7 +351,7 @@ static void hpte_decode(hpte_t *hpte, unsigned long slot, unsigned long hpte_r = hpte->r; unsigned long hpte_v = hpte->v; unsigned long avpn; - int i, size, shift, penc, avpnm_bits; + int i, size, shift, penc; if (!(hpte_v & HPTE_V_LARGE)) size = MMU_PAGE_4K; @@ -395,7 +395,7 @@ static void hpte_decode(hpte_t *hpte, unsigned long slot, vpi = (vsid ^ (vsid << 25) ^ pteg) & htab_hash_mask; break; default: - avpn = vpi = psize = 0; + avpn = vpi = size = 0; } avpn |= (vpi << mmu_psize_defs[size].shift); } diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig index 8f3c2a73e1651f8918a2971b415ce8a84a2e0bd5..f2d26268ca6f24d977fb776983d37f1e2c4ccaae 100644 --- a/arch/powerpc/platforms/embedded6xx/Kconfig +++ b/arch/powerpc/platforms/embedded6xx/Kconfig @@ -31,6 +31,14 @@ config PPC_HOLLY help Select PPC_HOLLY if configuring for an IBM 750GX/CL Eval Board with TSI108/9 bridge (Hickory/Holly) + +config PPC_PRPMC2800 + bool "Motorola-PrPMC2800" + select MV64X60 + select NOT_COHERENT_CACHE + select WANT_DEVICE_TREE + help + This option enables support for the Motorola PrPMC2800 board endchoice config TSI108_BRIDGE @@ -46,6 +54,11 @@ config MPC10X_BRIDGE select PPC_INDIRECT_PCI default y +config MV64X60 + bool + select PPC_INDIRECT_PCI + select CONFIG_CHECK_CACHE_COHERENCY + config MPC10X_OPENPIC bool depends on LINKSTATION diff --git a/arch/powerpc/platforms/embedded6xx/Makefile b/arch/powerpc/platforms/embedded6xx/Makefile index b39fe4f470d5950c9b619863e27bd11bdae13e70..844947cfc5db6728dcfe14a03b9b1c1b19513351 100644 --- a/arch/powerpc/platforms/embedded6xx/Makefile +++ b/arch/powerpc/platforms/embedded6xx/Makefile @@ -4,3 +4,4 @@ obj-$(CONFIG_MPC7448HPC2) += mpc7448_hpc2.o obj-$(CONFIG_LINKSTATION) += linkstation.o ls_uart.o obj-$(CONFIG_PPC_HOLLY) += holly.o +obj-$(CONFIG_PPC_PRPMC2800) += prpmc2800.o diff --git a/arch/powerpc/platforms/embedded6xx/prpmc2800.c b/arch/powerpc/platforms/embedded6xx/prpmc2800.c new file mode 100644 index 0000000000000000000000000000000000000000..53420951dc53a52733e4f8c83aea68bf17e5ecc8 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/prpmc2800.c @@ -0,0 +1,171 @@ +/* + * Board setup routines for the Motorola PrPMC2800 + * + * Author: Dale Farnsworth + * + * 2007 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include + +#include + +#define MV64x60_MPP_CNTL_0 0x0000 +#define MV64x60_MPP_CNTL_2 0x0008 + +#define MV64x60_GPP_IO_CNTL 0x0000 +#define MV64x60_GPP_LEVEL_CNTL 0x0010 +#define MV64x60_GPP_VALUE_SET 0x0018 + +#define PLATFORM_NAME_MAX 32 + +static char prpmc2800_platform_name[PLATFORM_NAME_MAX]; + +static void __iomem *mv64x60_mpp_reg_base; +static void __iomem *mv64x60_gpp_reg_base; + +static void __init prpmc2800_setup_arch(void) +{ + struct device_node *np; + phys_addr_t paddr; + const unsigned int *reg; + const unsigned int *prop; + + /* + * ioremap mpp and gpp registers in case they are later + * needed by prpmc2800_reset_board(). + */ + np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-mpp"); + reg = of_get_property(np, "reg", NULL); + paddr = of_translate_address(np, reg); + of_node_put(np); + mv64x60_mpp_reg_base = ioremap(paddr, reg[1]); + + np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-gpp"); + reg = of_get_property(np, "reg", NULL); + paddr = of_translate_address(np, reg); + of_node_put(np); + mv64x60_gpp_reg_base = ioremap(paddr, reg[1]); + + np = of_find_node_by_type(NULL, "cpu"); + prop = of_get_property(np, "clock-frequency", NULL); + if (prop) + loops_per_jiffy = *prop / HZ; + of_node_put(np); + +#ifdef CONFIG_PCI + mv64x60_pci_init(); +#endif + + printk("Motorola %s\n", prpmc2800_platform_name); +} + +static void prpmc2800_reset_board(void) +{ + u32 temp; + + local_irq_disable(); + + temp = in_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_0); + temp &= 0xFFFF0FFF; + out_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_0, temp); + + temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL); + temp |= 0x00000004; + out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL, temp); + + temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL); + temp |= 0x00000004; + out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL, temp); + + temp = in_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_2); + temp &= 0xFFFF0FFF; + out_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_2, temp); + + temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL); + temp |= 0x00080000; + out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL, temp); + + temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL); + temp |= 0x00080000; + out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL, temp); + + out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_VALUE_SET, 0x00080004); +} + +static void prpmc2800_restart(char *cmd) +{ + volatile ulong i = 10000000; + + prpmc2800_reset_board(); + + while (i-- > 0); + panic("restart failed\n"); +} + +#ifdef CONFIG_NOT_COHERENT_CACHE +#define PPRPM2800_COHERENCY_SETTING "off" +#else +#define PPRPM2800_COHERENCY_SETTING "on" +#endif + +void prpmc2800_show_cpuinfo(struct seq_file *m) +{ + uint memsize = total_memory; + + seq_printf(m, "Vendor\t\t: Motorola\n"); + seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); + seq_printf(m, "coherency\t: %s\n", PPRPM2800_COHERENCY_SETTING); +} + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init prpmc2800_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + unsigned long len = PLATFORM_NAME_MAX; + void *m; + + if (!of_flat_dt_is_compatible(root, "motorola,PrPMC2800")) + return 0; + + /* Update ppc_md.name with name from dt */ + m = of_get_flat_dt_prop(root, "model", &len); + if (m) + strncpy(prpmc2800_platform_name, m, + min((int)len, PLATFORM_NAME_MAX - 1)); + + return 1; +} + +define_machine(prpmc2800){ + .name = prpmc2800_platform_name, + .probe = prpmc2800_probe, + .setup_arch = prpmc2800_setup_arch, + .show_cpuinfo = prpmc2800_show_cpuinfo, + .init_IRQ = mv64x60_init_irq, + .get_irq = mv64x60_get_irq, + .restart = prpmc2800_restart, + .calibrate_decr = generic_calibrate_decr, +#ifdef CONFIG_KEXEC + .machine_kexec = default_machine_kexec, + .machine_kexec_prepare = default_machine_kexec_prepare, + .machine_crash_shutdown = default_machine_crash_shutdown, +#endif +}; diff --git a/arch/powerpc/platforms/pasemi/idle.c b/arch/powerpc/platforms/pasemi/idle.c index 5985ce0c5c489612288d62c722d1b088979489df..03cd45d8fefa3b5fcc86a34974ff768a52025525 100644 --- a/arch/powerpc/platforms/pasemi/idle.c +++ b/arch/powerpc/platforms/pasemi/idle.c @@ -22,6 +22,7 @@ #include #include +#include #include #include diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c index c9894933084f212131831e5fedd2a335200e81ba..9353967666216a33c08520755ce50d1fc65709a9 100644 --- a/arch/powerpc/platforms/ps3/setup.c +++ b/arch/powerpc/platforms/ps3/setup.c @@ -99,6 +99,7 @@ static void ps3_panic(char *str) while(1); } +#ifdef CONFIG_FB_PS3 static void prealloc(struct ps3_prealloc *p) { if (!p->size) @@ -115,7 +116,6 @@ static void prealloc(struct ps3_prealloc *p) p->address); } -#ifdef CONFIG_FB_PS3 struct ps3_prealloc ps3fb_videomemory = { .name = "ps3fb videomemory", .size = CONFIG_FB_PS3_DEFAULT_SIZE_M*1024*1024, diff --git a/arch/powerpc/platforms/ps3/smp.c b/arch/powerpc/platforms/ps3/smp.c index 8729348c06083af49b71ea18e78d4ee87e5471ab..53416ec5198b0beabaea0f4b85a81295537f6c1a 100644 --- a/arch/powerpc/platforms/ps3/smp.c +++ b/arch/powerpc/platforms/ps3/smp.c @@ -118,9 +118,11 @@ static void __init ps3_smp_setup_cpu(int cpu) DBG("%s:%d: (%d, %d) => virq %u\n", __func__, __LINE__, cpu, i, virqs[i]); + result = request_irq(virqs[i], ipi_function_handler, + IRQF_DISABLED, names[i], (void*)(long)i); - request_irq(virqs[i], ipi_function_handler, IRQF_DISABLED, - names[i], (void*)(long)i); + if (result) + virqs[i] = NO_IRQ; } ps3_register_ipi_debug_brk(cpu, virqs[PPC_MSG_DEBUGGER_BREAK]); diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c index 3c48cce98a5c0bba2ff7a063702ac7d49330d949..6bda51027cc6e2d3cd2c6791756ecba60d3d2886 100644 --- a/arch/powerpc/platforms/ps3/system-bus.c +++ b/arch/powerpc/platforms/ps3/system-bus.c @@ -274,13 +274,13 @@ static void ps3_unmap_single(struct device *_dev, dma_addr_t dma_addr, static int ps3_map_sg(struct device *_dev, struct scatterlist *sg, int nents, enum dma_data_direction direction) { - struct ps3_system_bus_device *dev = to_ps3_system_bus_device(_dev); - int i; - #if defined(CONFIG_PS3_DYNAMIC_DMA) BUG_ON("do"); return -EPERM; #else + struct ps3_system_bus_device *dev = to_ps3_system_bus_device(_dev); + int i; + for (i = 0; i < nents; i++, sg++) { int result = ps3_dma_map(dev->d_region, page_to_phys(sg->page) + sg->offset, sg->length, diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 9ce775c38ab7a2696728a8ef18f5577d7b0847a3..c3ce0bd12c0b94e461219dca62d3fef5a7650ad9 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -16,6 +16,8 @@ obj-$(CONFIG_FSL_SOC) += fsl_soc.o obj-$(CONFIG_FSL_PCIE) += fsl_pcie.o obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o obj-$(CONFIG_QUICC_ENGINE) += qe_lib/ +mv64x60-$(CONFIG_PCI) += mv64x60_pci.o +obj-$(CONFIG_MV64X60) += $(mv64x60-y) mv64x60_pic.o mv64x60_dev.o # contains only the suspend handler for time obj-$(CONFIG_PM) += timer.o diff --git a/arch/powerpc/sysdev/mv64x60.h b/arch/powerpc/sysdev/mv64x60.h new file mode 100644 index 0000000000000000000000000000000000000000..2ff0b4ef268134d9b4948172c1ef0f84be6225f2 --- /dev/null +++ b/arch/powerpc/sysdev/mv64x60.h @@ -0,0 +1,11 @@ +#ifndef __MV64X60_H__ +#define __MV64X60_H__ + +#include + +extern void __init mv64x60_init_irq(void); +extern unsigned int mv64x60_get_irq(void); + +extern void __init mv64x60_pci_init(void); + +#endif /* __MV64X60_H__ */ diff --git a/arch/powerpc/sysdev/mv64x60_dev.c b/arch/powerpc/sysdev/mv64x60_dev.c new file mode 100644 index 0000000000000000000000000000000000000000..4b0a9c88eeb3563937638b34ad8e26527418bb70 --- /dev/null +++ b/arch/powerpc/sysdev/mv64x60_dev.c @@ -0,0 +1,422 @@ +/* + * Platform device setup for Marvell mv64360/mv64460 host bridges (Discovery) + * + * Author: Dale Farnsworth + * + * 2007 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#include +#include +#include +#include +#include + +#include + +/* + * These functions provide the necessary setup for the mv64x60 drivers. + * These drivers are unusual in that they work on both the MIPS and PowerPC + * architectures. Because of that, the drivers do not support the normal + * PowerPC of_platform_bus_type. They support platform_bus_type instead. + */ + +/* + * Create MPSC platform devices + */ +static int __init mv64x60_mpsc_register_shared_pdev(struct device_node *np) +{ + struct platform_device *pdev; + struct resource r[2]; + struct mpsc_shared_pdata pdata; + const phandle *ph; + struct device_node *mpscrouting, *mpscintr; + int err; + + ph = of_get_property(np, "mpscrouting", NULL); + mpscrouting = of_find_node_by_phandle(*ph); + if (!mpscrouting) + return -ENODEV; + + err = of_address_to_resource(mpscrouting, 0, &r[0]); + of_node_put(mpscrouting); + if (err) + return err; + + ph = of_get_property(np, "mpscintr", NULL); + mpscintr = of_find_node_by_phandle(*ph); + if (!mpscintr) + return -ENODEV; + + err = of_address_to_resource(mpscintr, 0, &r[1]); + of_node_put(mpscintr); + if (err) + return err; + + memset(&pdata, 0, sizeof(pdata)); + + pdev = platform_device_alloc(MPSC_SHARED_NAME, 0); + if (!pdev) + return -ENOMEM; + + err = platform_device_add_resources(pdev, r, 2); + if (err) + goto error; + + err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); + if (err) + goto error; + + err = platform_device_add(pdev); + if (err) + goto error; + + return 0; + +error: + platform_device_put(pdev); + return err; +} + + +static int __init mv64x60_mpsc_device_setup(struct device_node *np, int id) +{ + struct resource r[5]; + struct mpsc_pdata pdata; + struct platform_device *pdev; + const unsigned int *prop; + const phandle *ph; + struct device_node *sdma, *brg; + int err; + int port_number; + + /* only register the shared platform device the first time through */ + if (id == 0 && (err = mv64x60_mpsc_register_shared_pdev(np))) + return err; + + memset(r, 0, sizeof(r)); + + err = of_address_to_resource(np, 0, &r[0]); + if (err) + return err; + + of_irq_to_resource(np, 0, &r[4]); + + ph = of_get_property(np, "sdma", NULL); + sdma = of_find_node_by_phandle(*ph); + if (!sdma) + return -ENODEV; + + of_irq_to_resource(sdma, 0, &r[3]); + err = of_address_to_resource(sdma, 0, &r[1]); + of_node_put(sdma); + if (err) + return err; + + ph = of_get_property(np, "brg", NULL); + brg = of_find_node_by_phandle(*ph); + if (!brg) + return -ENODEV; + + err = of_address_to_resource(brg, 0, &r[2]); + of_node_put(brg); + if (err) + return err; + + prop = of_get_property(np, "block-index", NULL); + if (!prop) + return -ENODEV; + port_number = *(int *)prop; + + memset(&pdata, 0, sizeof(pdata)); + + pdata.cache_mgmt = 1; /* All current revs need this set */ + + prop = of_get_property(np, "max_idle", NULL); + if (prop) + pdata.max_idle = *prop; + + prop = of_get_property(brg, "current-speed", NULL); + if (prop) + pdata.default_baud = *prop; + + /* Default is 8 bits, no parity, no flow control */ + pdata.default_bits = 8; + pdata.default_parity = 'n'; + pdata.default_flow = 'n'; + + prop = of_get_property(np, "chr_1", NULL); + if (prop) + pdata.chr_1_val = *prop; + + prop = of_get_property(np, "chr_2", NULL); + if (prop) + pdata.chr_2_val = *prop; + + prop = of_get_property(np, "chr_10", NULL); + if (prop) + pdata.chr_10_val = *prop; + + prop = of_get_property(np, "mpcr", NULL); + if (prop) + pdata.mpcr_val = *prop; + + prop = of_get_property(brg, "bcr", NULL); + if (prop) + pdata.bcr_val = *prop; + + pdata.brg_can_tune = 1; /* All current revs need this set */ + + prop = of_get_property(brg, "clock-src", NULL); + if (prop) + pdata.brg_clk_src = *prop; + + prop = of_get_property(brg, "clock-frequency", NULL); + if (prop) + pdata.brg_clk_freq = *prop; + + pdev = platform_device_alloc(MPSC_CTLR_NAME, port_number); + if (!pdev) + return -ENOMEM; + + err = platform_device_add_resources(pdev, r, 5); + if (err) + goto error; + + err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); + if (err) + goto error; + + err = platform_device_add(pdev); + if (err) + goto error; + + return 0; + +error: + platform_device_put(pdev); + return err; +} + +/* + * Create mv64x60_eth platform devices + */ +static int __init eth_register_shared_pdev(struct device_node *np) +{ + struct platform_device *pdev; + struct resource r[1]; + int err; + + np = of_get_parent(np); + if (!np) + return -ENODEV; + + err = of_address_to_resource(np, 0, &r[0]); + of_node_put(np); + if (err) + return err; + + pdev = platform_device_register_simple(MV643XX_ETH_SHARED_NAME, 0, + r, 1); + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + + return 0; +} + +static int __init mv64x60_eth_device_setup(struct device_node *np, int id) +{ + struct resource r[1]; + struct mv643xx_eth_platform_data pdata; + struct platform_device *pdev; + struct device_node *phy; + const u8 *mac_addr; + const int *prop; + const phandle *ph; + int err; + + /* only register the shared platform device the first time through */ + if (id == 0 && (err = eth_register_shared_pdev(np))) + return err;; + + memset(r, 0, sizeof(r)); + of_irq_to_resource(np, 0, &r[0]); + + memset(&pdata, 0, sizeof(pdata)); + + prop = of_get_property(np, "block-index", NULL); + if (!prop) + return -ENODEV; + pdata.port_number = *prop; + + mac_addr = of_get_mac_address(np); + if (mac_addr) + memcpy(pdata.mac_addr, mac_addr, 6); + + prop = of_get_property(np, "speed", NULL); + if (prop) + pdata.speed = *prop; + + prop = of_get_property(np, "tx_queue_size", NULL); + if (prop) + pdata.tx_queue_size = *prop; + + prop = of_get_property(np, "rx_queue_size", NULL); + if (prop) + pdata.rx_queue_size = *prop; + + prop = of_get_property(np, "tx_sram_addr", NULL); + if (prop) + pdata.tx_sram_addr = *prop; + + prop = of_get_property(np, "tx_sram_size", NULL); + if (prop) + pdata.tx_sram_size = *prop; + + prop = of_get_property(np, "rx_sram_addr", NULL); + if (prop) + pdata.rx_sram_addr = *prop; + + prop = of_get_property(np, "rx_sram_size", NULL); + if (prop) + pdata.rx_sram_size = *prop; + + ph = of_get_property(np, "phy", NULL); + if (!ph) + return -ENODEV; + + phy = of_find_node_by_phandle(*ph); + if (phy == NULL) + return -ENODEV; + + prop = of_get_property(phy, "reg", NULL); + if (prop) { + pdata.force_phy_addr = 1; + pdata.phy_addr = *prop; + } + + of_node_put(phy); + + pdev = platform_device_alloc(MV643XX_ETH_NAME, pdata.port_number); + if (!pdev) + return -ENOMEM; + + err = platform_device_add_resources(pdev, r, 1); + if (err) + goto error; + + err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); + if (err) + goto error; + + err = platform_device_add(pdev); + if (err) + goto error; + + return 0; + +error: + platform_device_put(pdev); + return err; +} + +/* + * Create mv64x60_i2c platform devices + */ +static int __init mv64x60_i2c_device_setup(struct device_node *np, int id) +{ + struct resource r[2]; + struct platform_device *pdev; + struct mv64xxx_i2c_pdata pdata; + const unsigned int *prop; + int err; + + memset(r, 0, sizeof(r)); + + err = of_address_to_resource(np, 0, &r[0]); + if (err) + return err; + + of_irq_to_resource(np, 0, &r[1]); + + memset(&pdata, 0, sizeof(pdata)); + + prop = of_get_property(np, "freq_m", NULL); + if (!prop) + return -ENODEV; + pdata.freq_m = *prop; + + prop = of_get_property(np, "freq_n", NULL); + if (!prop) + return -ENODEV; + pdata.freq_n = *prop; + + prop = of_get_property(np, "timeout", NULL); + if (prop) + pdata.timeout = *prop; + else + pdata.timeout = 1000; /* 1 second */ + + prop = of_get_property(np, "retries", NULL); + if (prop) + pdata.retries = *prop; + else + pdata.retries = 1; + + pdev = platform_device_alloc(MV64XXX_I2C_CTLR_NAME, id); + if (!pdev) + return -ENOMEM; + + err = platform_device_add_resources(pdev, r, 2); + if (err) + goto error; + + err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); + if (err) + goto error; + + err = platform_device_add(pdev); + if (err) + goto error; + + return 0; + +error: + platform_device_put(pdev); + return err; +} + +static int __init mv64x60_device_setup(void) +{ + struct device_node *np = NULL; + int id; + int err; + + for (id = 0; + (np = of_find_compatible_node(np, "serial", "marvell,mpsc")); id++) + if ((err = mv64x60_mpsc_device_setup(np, id))) + goto error; + + for (id = 0; + (np = of_find_compatible_node(np, "network", + "marvell,mv64x60-eth")); + id++) + if ((err = mv64x60_eth_device_setup(np, id))) + goto error; + + for (id = 0; + (np = of_find_compatible_node(np, "i2c", "marvell,mv64x60-i2c")); + id++) + if ((err = mv64x60_i2c_device_setup(np, id))) + goto error; + + return 0; + +error: + of_node_put(np); + return err; +} +arch_initcall(mv64x60_device_setup); diff --git a/arch/powerpc/sysdev/mv64x60_pci.c b/arch/powerpc/sysdev/mv64x60_pci.c new file mode 100644 index 0000000000000000000000000000000000000000..b5aef4cbc8d21f3ef0fd160fbef4e49b5e7e1dbf --- /dev/null +++ b/arch/powerpc/sysdev/mv64x60_pci.c @@ -0,0 +1,172 @@ +/* + * PCI bus setup for Marvell mv64360/mv64460 host bridges (Discovery) + * + * Author: Dale Farnsworth + * + * 2007 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#include +#include +#include +#include + +#include +#include + +#define PCI_HEADER_TYPE_INVALID 0x7f /* Invalid PCI header type */ + +#ifdef CONFIG_SYSFS +/* 32-bit hex or dec stringified number + '\n' */ +#define MV64X60_VAL_LEN_MAX 11 +#define MV64X60_PCICFG_CPCI_HOTSWAP 0x68 + +static ssize_t mv64x60_hs_reg_read(struct kobject *kobj, char *buf, loff_t off, + size_t count) +{ + struct pci_dev *phb; + u32 v; + + if (off > 0) + return 0; + if (count < MV64X60_VAL_LEN_MAX) + return -EINVAL; + + phb = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0)); + if (!phb) + return -ENODEV; + pci_read_config_dword(phb, MV64X60_PCICFG_CPCI_HOTSWAP, &v); + pci_dev_put(phb); + + return sprintf(buf, "0x%08x\n", v); +} + +static ssize_t mv64x60_hs_reg_write(struct kobject *kobj, char *buf, loff_t off, + size_t count) +{ + struct pci_dev *phb; + u32 v; + + if (off > 0) + return 0; + if (count <= 0) + return -EINVAL; + + if (sscanf(buf, "%i", &v) != 1) + return -EINVAL; + + phb = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0)); + if (!phb) + return -ENODEV; + pci_write_config_dword(phb, MV64X60_PCICFG_CPCI_HOTSWAP, v); + pci_dev_put(phb); + + return count; +} + +static struct bin_attribute mv64x60_hs_reg_attr = { /* Hotswap register */ + .attr = { + .name = "hs_reg", + .mode = S_IRUGO | S_IWUSR, + .owner = THIS_MODULE, + }, + .size = MV64X60_VAL_LEN_MAX, + .read = mv64x60_hs_reg_read, + .write = mv64x60_hs_reg_write, +}; + +static int __init mv64x60_sysfs_init(void) +{ + struct device_node *np; + struct platform_device *pdev; + const unsigned int *prop; + + np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60"); + if (!np) + return 0; + + prop = of_get_property(np, "hs_reg_valid", NULL); + of_node_put(np); + + pdev = platform_device_register_simple("marvell,mv64x60", 0, NULL, 0); + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + + return sysfs_create_bin_file(&pdev->dev.kobj, &mv64x60_hs_reg_attr); +} + +subsys_initcall(mv64x60_sysfs_init); + +#endif /* CONFIG_SYSFS */ + +static void __init mv64x60_pci_fixup_early(struct pci_dev *dev) +{ + /* + * Set the host bridge hdr_type to an invalid value so that + * pci_setup_device() will ignore the host bridge. + */ + dev->hdr_type = PCI_HEADER_TYPE_INVALID; +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_MV64360, + mv64x60_pci_fixup_early); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_MV64460, + mv64x60_pci_fixup_early); + +static int __init mv64x60_add_bridge(struct device_node *dev) +{ + int len; + struct pci_controller *hose; + struct resource rsrc; + const int *bus_range; + int primary; + + memset(&rsrc, 0, sizeof(rsrc)); + + /* Fetch host bridge registers address */ + if (of_address_to_resource(dev, 0, &rsrc)) { + printk(KERN_ERR "No PCI reg property in device tree\n"); + return -ENODEV; + } + + /* Get bus range if any */ + bus_range = of_get_property(dev, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) + printk(KERN_WARNING "Can't get bus-range for %s, assume" + " bus 0\n", dev->full_name); + + hose = pcibios_alloc_controller(); + if (!hose) + return -ENOMEM; + + hose->arch_data = dev; + hose->set_cfg_type = 1; + + hose->first_busno = bus_range ? bus_range[0] : 0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + + setup_indirect_pci(hose, rsrc.start, rsrc.start + 4); + hose->bus_offset = hose->first_busno; + + printk(KERN_INFO "Found MV64x60 PCI host bridge at 0x%016llx. " + "Firmware bus number: %d->%d\n", + (unsigned long long)rsrc.start, hose->first_busno, + hose->last_busno); + + /* Interpret the "ranges" property */ + /* This also maps the I/O region and sets isa_io/mem_base */ + primary = (hose->first_busno == 0); + pci_process_bridge_OF_ranges(hose, dev, primary); + + return 0; +} + +void __init mv64x60_pci_init(void) +{ + struct device_node *np = NULL; + + while ((np = of_find_compatible_node(np, "pci", "marvell,mv64x60-pci"))) + mv64x60_add_bridge(np); +} diff --git a/arch/powerpc/sysdev/mv64x60_pic.c b/arch/powerpc/sysdev/mv64x60_pic.c new file mode 100644 index 0000000000000000000000000000000000000000..01d316287772c9f2b021da090aedec08cc0fd6a1 --- /dev/null +++ b/arch/powerpc/sysdev/mv64x60_pic.c @@ -0,0 +1,305 @@ +/* + * Interrupt handling for Marvell mv64360/mv64460 host bridges (Discovery) + * + * Author: Dale Farnsworth + * + * 2007 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "mv64x60.h" + +/* Interrupt Controller Interface Registers */ +#define MV64X60_IC_MAIN_CAUSE_LO 0x0004 +#define MV64X60_IC_MAIN_CAUSE_HI 0x000c +#define MV64X60_IC_CPU0_INTR_MASK_LO 0x0014 +#define MV64X60_IC_CPU0_INTR_MASK_HI 0x001c +#define MV64X60_IC_CPU0_SELECT_CAUSE 0x0024 + +#define MV64X60_HIGH_GPP_GROUPS 0x0f000000 +#define MV64X60_SELECT_CAUSE_HIGH 0x40000000 + +/* General Purpose Pins Controller Interface Registers */ +#define MV64x60_GPP_INTR_CAUSE 0x0008 +#define MV64x60_GPP_INTR_MASK 0x000c + +#define MV64x60_LEVEL1_LOW 0 +#define MV64x60_LEVEL1_HIGH 1 +#define MV64x60_LEVEL1_GPP 2 + +#define MV64x60_LEVEL1_MASK 0x00000060 +#define MV64x60_LEVEL1_OFFSET 5 + +#define MV64x60_LEVEL2_MASK 0x0000001f + +#define MV64x60_NUM_IRQS 96 + +static DEFINE_SPINLOCK(mv64x60_lock); + +static void __iomem *mv64x60_irq_reg_base; +static void __iomem *mv64x60_gpp_reg_base; + +/* + * Interrupt Controller Handling + * + * The interrupt controller handles three groups of interrupts: + * main low: IRQ0-IRQ31 + * main high: IRQ32-IRQ63 + * gpp: IRQ64-IRQ95 + * + * This code handles interrupts in two levels. Level 1 selects the + * interrupt group, and level 2 selects an IRQ within that group. + * Each group has its own irq_chip structure. + */ + +static u32 mv64x60_cached_low_mask; +static u32 mv64x60_cached_high_mask = MV64X60_HIGH_GPP_GROUPS; +static u32 mv64x60_cached_gpp_mask; + +static struct irq_host *mv64x60_irq_host; + +/* + * mv64x60_chip_low functions + */ + +static void mv64x60_mask_low(unsigned int virq) +{ + int level2 = irq_map[virq].hwirq & MV64x60_LEVEL2_MASK; + unsigned long flags; + + spin_lock_irqsave(&mv64x60_lock, flags); + mv64x60_cached_low_mask &= ~(1 << level2); + out_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_LO, + mv64x60_cached_low_mask); + spin_unlock_irqrestore(&mv64x60_lock, flags); + (void)in_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_LO); +} + +static void mv64x60_unmask_low(unsigned int virq) +{ + int level2 = irq_map[virq].hwirq & MV64x60_LEVEL2_MASK; + unsigned long flags; + + spin_lock_irqsave(&mv64x60_lock, flags); + mv64x60_cached_low_mask |= 1 << level2; + out_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_LO, + mv64x60_cached_low_mask); + spin_unlock_irqrestore(&mv64x60_lock, flags); + (void)in_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_LO); +} + +static struct irq_chip mv64x60_chip_low = { + .name = "mv64x60_low", + .mask = mv64x60_mask_low, + .mask_ack = mv64x60_mask_low, + .unmask = mv64x60_unmask_low, +}; + +/* + * mv64x60_chip_high functions + */ + +static void mv64x60_mask_high(unsigned int virq) +{ + int level2 = irq_map[virq].hwirq & MV64x60_LEVEL2_MASK; + unsigned long flags; + + spin_lock_irqsave(&mv64x60_lock, flags); + mv64x60_cached_high_mask &= ~(1 << level2); + out_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_HI, + mv64x60_cached_high_mask); + spin_unlock_irqrestore(&mv64x60_lock, flags); + (void)in_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_HI); +} + +static void mv64x60_unmask_high(unsigned int virq) +{ + int level2 = irq_map[virq].hwirq & MV64x60_LEVEL2_MASK; + unsigned long flags; + + spin_lock_irqsave(&mv64x60_lock, flags); + mv64x60_cached_high_mask |= 1 << level2; + out_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_HI, + mv64x60_cached_high_mask); + spin_unlock_irqrestore(&mv64x60_lock, flags); + (void)in_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_HI); +} + +static struct irq_chip mv64x60_chip_high = { + .name = "mv64x60_high", + .mask = mv64x60_mask_high, + .mask_ack = mv64x60_mask_high, + .unmask = mv64x60_unmask_high, +}; + +/* + * mv64x60_chip_gpp functions + */ + +static void mv64x60_mask_gpp(unsigned int virq) +{ + int level2 = irq_map[virq].hwirq & MV64x60_LEVEL2_MASK; + unsigned long flags; + + spin_lock_irqsave(&mv64x60_lock, flags); + mv64x60_cached_gpp_mask &= ~(1 << level2); + out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_MASK, + mv64x60_cached_gpp_mask); + spin_unlock_irqrestore(&mv64x60_lock, flags); + (void)in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_MASK); +} + +static void mv64x60_mask_ack_gpp(unsigned int virq) +{ + int level2 = irq_map[virq].hwirq & MV64x60_LEVEL2_MASK; + unsigned long flags; + + spin_lock_irqsave(&mv64x60_lock, flags); + mv64x60_cached_gpp_mask &= ~(1 << level2); + out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_MASK, + mv64x60_cached_gpp_mask); + out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_CAUSE, + ~(1 << level2)); + spin_unlock_irqrestore(&mv64x60_lock, flags); + (void)in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_CAUSE); +} + +static void mv64x60_unmask_gpp(unsigned int virq) +{ + int level2 = irq_map[virq].hwirq & MV64x60_LEVEL2_MASK; + unsigned long flags; + + spin_lock_irqsave(&mv64x60_lock, flags); + mv64x60_cached_gpp_mask |= 1 << level2; + out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_MASK, + mv64x60_cached_gpp_mask); + spin_unlock_irqrestore(&mv64x60_lock, flags); + (void)in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_MASK); +} + +static struct irq_chip mv64x60_chip_gpp = { + .name = "mv64x60_gpp", + .mask = mv64x60_mask_gpp, + .mask_ack = mv64x60_mask_ack_gpp, + .unmask = mv64x60_unmask_gpp, +}; + +/* + * mv64x60_host_ops functions + */ + +static int mv64x60_host_match(struct irq_host *h, struct device_node *np) +{ + return mv64x60_irq_host->host_data == np; +} + +static struct irq_chip *mv64x60_chips[] = { + [MV64x60_LEVEL1_LOW] = &mv64x60_chip_low, + [MV64x60_LEVEL1_HIGH] = &mv64x60_chip_high, + [MV64x60_LEVEL1_GPP] = &mv64x60_chip_gpp, +}; + +static int mv64x60_host_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hwirq) +{ + int level1; + + get_irq_desc(virq)->status |= IRQ_LEVEL; + + level1 = (hwirq & MV64x60_LEVEL1_MASK) >> MV64x60_LEVEL1_OFFSET; + BUG_ON(level1 > MV64x60_LEVEL1_GPP); + set_irq_chip_and_handler(virq, mv64x60_chips[level1], handle_level_irq); + + return 0; +} + +static struct irq_host_ops mv64x60_host_ops = { + .match = mv64x60_host_match, + .map = mv64x60_host_map, +}; + +/* + * Global functions + */ + +void __init mv64x60_init_irq(void) +{ + struct device_node *np; + phys_addr_t paddr; + unsigned int size; + const unsigned int *reg; + unsigned long flags; + + np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-gpp"); + reg = of_get_property(np, "reg", &size); + paddr = of_translate_address(np, reg); + mv64x60_gpp_reg_base = ioremap(paddr, reg[1]); + of_node_put(np); + + np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-pic"); + reg = of_get_property(np, "reg", &size); + paddr = of_translate_address(np, reg); + of_node_put(np); + mv64x60_irq_reg_base = ioremap(paddr, reg[1]); + + mv64x60_irq_host = irq_alloc_host(IRQ_HOST_MAP_LINEAR, MV64x60_NUM_IRQS, + &mv64x60_host_ops, MV64x60_NUM_IRQS); + + mv64x60_irq_host->host_data = np; + + spin_lock_irqsave(&mv64x60_lock, flags); + out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_MASK, + mv64x60_cached_gpp_mask); + out_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_LO, + mv64x60_cached_low_mask); + out_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_HI, + mv64x60_cached_high_mask); + + out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_CAUSE, 0); + out_le32(mv64x60_irq_reg_base + MV64X60_IC_MAIN_CAUSE_LO, 0); + out_le32(mv64x60_irq_reg_base + MV64X60_IC_MAIN_CAUSE_HI, 0); + spin_unlock_irqrestore(&mv64x60_lock, flags); +} + +unsigned int mv64x60_get_irq(void) +{ + u32 cause; + int level1; + irq_hw_number_t hwirq; + int virq = NO_IRQ; + + cause = in_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_SELECT_CAUSE); + if (cause & MV64X60_SELECT_CAUSE_HIGH) { + cause &= mv64x60_cached_high_mask; + level1 = MV64x60_LEVEL1_HIGH; + if (cause & MV64X60_HIGH_GPP_GROUPS) { + cause = in_le32(mv64x60_gpp_reg_base + + MV64x60_GPP_INTR_CAUSE); + cause &= mv64x60_cached_gpp_mask; + level1 = MV64x60_LEVEL1_GPP; + } + } else { + cause &= mv64x60_cached_low_mask; + level1 = MV64x60_LEVEL1_LOW; + } + if (cause) { + hwirq = (level1 << MV64x60_LEVEL1_OFFSET) | __ilog2(cause); + virq = irq_linear_revmap(mv64x60_irq_host, hwirq); + } + + return virq; +} diff --git a/arch/ppc/4xx_io/serial_sicc.c b/arch/ppc/4xx_io/serial_sicc.c index e35483961b9071af1f46643cd4b875bb2673d74e..efa0a56e230bfe2880cdee863921fb1f7e9fec49 100644 --- a/arch/ppc/4xx_io/serial_sicc.c +++ b/arch/ppc/4xx_io/serial_sicc.c @@ -3,7 +3,7 @@ * * Based on drivers/char/serial_amba.c, by ARM Ltd. * - * Copyright 2001 IBM Crop. + * Copyright 2001 IBM Corp. * Author: IBM China Research Lab * Yudong Yang * Yi Ge @@ -155,16 +155,16 @@ /* serial port transmit command register */ -#define _TxCR_ET_MASK 0x80 /* transmiter enable mask */ +#define _TxCR_ET_MASK 0x80 /* transmitter enable mask */ #define _TxCR_DME_MASK 0x60 /* dma mode mask */ #define _TxCR_TIE_MASK 0x10 /* empty interrupt enable mask */ #define _TxCR_EIE_MASK 0x08 /* error interrupt enable mask */ #define _TxCR_SPE_MASK 0x04 /* stop/pause mask */ #define _TxCR_TB_MASK 0x02 /* transmit break mask */ -#define _TxCR_ET_ENABLE _TxCR_ET_MASK /* transmiter enabled */ -#define _TxCR_DME_DISABLE 0x00 /* transmiter disabled, TBR intr disabled */ -#define _TxCR_DME_TBR 0x20 /* transmiter disabled, TBR intr enabled */ +#define _TxCR_ET_ENABLE _TxCR_ET_MASK /* transmitter enabled */ +#define _TxCR_DME_DISABLE 0x00 /* transmitter disabled, TBR intr disabled */ +#define _TxCR_DME_TBR 0x20 /* transmitter disabled, TBR intr enabled */ #define _TxCR_DME_CHAN_2 0x40 /* dma enabled, destination chann 2 */ #define _TxCR_DME_CHAN_3 0x60 /* dma enabled, destination chann 3 */ diff --git a/arch/ppc/8xx_io/commproc.c b/arch/ppc/8xx_io/commproc.c index e2c6210f234baf322ad2dd40d2f8af0d0184433c..7088428e1fe22e32e9abd27bbb015b5639123d6c 100644 --- a/arch/ppc/8xx_io/commproc.c +++ b/arch/ppc/8xx_io/commproc.c @@ -144,7 +144,7 @@ m8xx_cpm_reset(void) /* Set SDMA Bus Request priority 5. * On 860T, this also enables FEC priority 6. I am not sure - * this is what we realy want for some applications, but the + * this is what we really want for some applications, but the * manual recommends it. * Bit 25, FAM can also be set to use FEC aggressive mode (860T). */ diff --git a/arch/ppc/8xx_io/fec.c b/arch/ppc/8xx_io/fec.c index 57a9a61e54b576f6ee7baaa140b3455ac6affe3a..d38335d2d710d3d2344d6a154eba7471aaed3ed6 100644 --- a/arch/ppc/8xx_io/fec.c +++ b/arch/ppc/8xx_io/fec.c @@ -1878,7 +1878,7 @@ fec_restart(struct net_device *dev, int duplex) bdp--; bdp->cbd_sc |= BD_SC_WRAP; - /* ...and the same for transmmit. + /* ...and the same for transmit. */ bdp = fep->tx_bd_base; for (i=0; icmd_stat & SDMA_DESC_CMDSTAT_O) == 0) && (loop_count++ < RX_NUM_DESC)) { diff --git a/arch/ppc/boot/simple/rw4/stb.h b/arch/ppc/boot/simple/rw4/stb.h index fd98ee0f843e4d2c815047822d4d032fcdb4fe31..9afa5ab24d260855f0fff8f1471af9e2733c30bf 100644 --- a/arch/ppc/boot/simple/rw4/stb.h +++ b/arch/ppc/boot/simple/rw4/stb.h @@ -88,7 +88,7 @@ /*----------------------------------------------------------------------------+ | STB tasks, task stack sizes, and task priorities. The actual task priority | is 1 more than the specified number since priority 0 is reserved (system -| internaly adds 1 to supplied priority number). +| internally adds 1 to supplied priority number). +----------------------------------------------------------------------------*/ #define STB_IDLE_TASK_SS (5* 1024) #define STB_IDLE_TASK_PRIO 0 diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c index 810f7aa72e924528796aae3306af03587a8204b6..aea100be52c8ba8f6b48431fa0a2ce72406c6492 100644 --- a/arch/ppc/kernel/traps.c +++ b/arch/ppc/kernel/traps.c @@ -577,7 +577,7 @@ void program_check_exception(struct pt_regs *regs) * ESR_DST (!?) or 0. In the process of chasing this with the * hardware people - not sure if it can happen on any illegal * instruction or only on FP instructions, whether there is a - * pattern to occurences etc. -dgibson 31/Mar/2003 */ + * pattern to occurrences etc. -dgibson 31/Mar/2003 */ if (!(reason & REASON_TRAP) && do_mathemu(regs) == 0) { emulate_single_step(regs); return; @@ -860,7 +860,7 @@ void SPEFloatingPointException(struct pt_regs *regs) spefscr = current->thread.spefscr; fpexc_mode = current->thread.fpexc_mode; - /* Hardware does not neccessarily set sticky + /* Hardware does not necessarily set sticky * underflow/overflow/invalid flags */ if ((spefscr & SPEFSCR_FOVF) && (fpexc_mode & PR_FP_EXC_OVF)) { code = FPE_FLTOVF; diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c index c374e53ae03a0971654d26b5670f0e670b65cf40..390dd1995c2a4ee2e7cbe4267227b76069e02eba 100644 --- a/arch/ppc/mm/init.c +++ b/arch/ppc/mm/init.c @@ -48,7 +48,7 @@ #include "mmu_decl.h" #if defined(CONFIG_KERNEL_START_BOOL) || defined(CONFIG_LOWMEM_SIZE_BOOL) -/* The ammount of lowmem must be within 0xF0000000 - KERNELBASE. */ +/* The amount of lowmem must be within 0xF0000000 - KERNELBASE. */ #if (CONFIG_LOWMEM_SIZE > (0xF0000000 - KERNELBASE)) #error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_START_KERNEL" #endif diff --git a/arch/ppc/platforms/4xx/bubinga.c b/arch/ppc/platforms/4xx/bubinga.c index 75857b38e8947813994871f5dada6e107a64f941..1a7f075b754f23a21d512f822832a7462716819f 100644 --- a/arch/ppc/platforms/4xx/bubinga.c +++ b/arch/ppc/platforms/4xx/bubinga.c @@ -197,7 +197,7 @@ bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip) hose->first_busno, PCI_SLOT(hose->first_busno), PCI_FUNC(hose->first_busno), bar, bar_response); } - /* end work arround */ + /* end workaround */ #ifdef DEBUG printk("PCI bridge regs after fixup \n"); diff --git a/arch/ppc/platforms/4xx/ep405.c b/arch/ppc/platforms/4xx/ep405.c index e5adf9ba1fca34ddef4a525a975c60ace70e3c76..5aa2950228045b15b30092a54eba1c1ddb210c1d 100644 --- a/arch/ppc/platforms/4xx/ep405.c +++ b/arch/ppc/platforms/4xx/ep405.c @@ -130,7 +130,7 @@ bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip) hose->first_busno, PCI_SLOT(hose->first_busno), PCI_FUNC(hose->first_busno), bar, bar_response); } - /* end work arround */ + /* end workaround */ #endif } diff --git a/arch/ppc/platforms/4xx/ibmnp405h.h b/arch/ppc/platforms/4xx/ibmnp405h.h index 4aa8821b478bb3e70439a43680bdc20d3d5a8b98..08a6a779190304cca2f47f5bb6891fb92c580221 100644 --- a/arch/ppc/platforms/4xx/ibmnp405h.h +++ b/arch/ppc/platforms/4xx/ibmnp405h.h @@ -80,7 +80,7 @@ #define DCRN_CPMFR_BASE 0x0B9 #define DCRN_CPMER_BASE 0x0B8 -/* CPM Clocking & Power Mangement defines */ +/* CPM Clocking & Power Management defines */ #define IBM_CPM_PCI 0x40000000 /* PCI */ #define IBM_CPM_EMAC2 0x20000000 /* EMAC 2 MII */ #define IBM_CPM_EMAC3 0x04000000 /* EMAC 3 MII */ diff --git a/arch/ppc/platforms/4xx/sycamore.c b/arch/ppc/platforms/4xx/sycamore.c index c47493e344c2d860bfc6de4f1112549365ee9805..8689f3e8ef3a35dd15026713054e2733a1577483 100644 --- a/arch/ppc/platforms/4xx/sycamore.c +++ b/arch/ppc/platforms/4xx/sycamore.c @@ -225,7 +225,7 @@ bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip) hose->first_busno, PCI_SLOT(hose->first_busno), PCI_FUNC(hose->first_busno), bar, bar_response); } - /* end work arround */ + /* end workaround */ #ifdef DEBUG printk("PCI bridge regs after fixup \n"); diff --git a/arch/ppc/platforms/4xx/walnut.c b/arch/ppc/platforms/4xx/walnut.c index f414d2d4c58e6c8598f3996dee5324b0966eb3b9..2f9772340854e2f6f1b02c7018f9f5f1850c6c64 100644 --- a/arch/ppc/platforms/4xx/walnut.c +++ b/arch/ppc/platforms/4xx/walnut.c @@ -200,7 +200,7 @@ bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip) hose->first_busno, PCI_SLOT(hose->first_busno), PCI_FUNC(hose->first_busno), bar, bar_response); } - /* end work arround */ + /* end work around */ #ifdef DEBUG printk("PCI bridge regs after fixup \n"); diff --git a/arch/ppc/platforms/ev64360.c b/arch/ppc/platforms/ev64360.c index f87e06f6bab99aabffbda6a6c104314400760637..f8baf05f16ce14378dd964835845d9cd1abbeda0 100644 --- a/arch/ppc/platforms/ev64360.c +++ b/arch/ppc/platforms/ev64360.c @@ -473,7 +473,7 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, * are non-zero, then we should use the board info from the bd_t * structure and the cmdline pointed to by r6 instead of the * information from birecs, if any. Otherwise, use the information - * from birecs as discovered by the preceeding call to + * from birecs as discovered by the preceding call to * parse_bootinfo(). This rule should work with both PPCBoot, which * uses a bd_t board info structure, and the kernel boot wrapper, * which uses birecs. diff --git a/arch/ppc/platforms/hdpu.c b/arch/ppc/platforms/hdpu.c index d809e17aa5361bbc25902bdd93e99b5e739e07d9..ca5de13712fd7a735628e4837c14017474d34b4c 100644 --- a/arch/ppc/platforms/hdpu.c +++ b/arch/ppc/platforms/hdpu.c @@ -144,7 +144,7 @@ static void __init hdpu_setup_peripherals(void) /* Enable pipelining */ mv64x60_set_bits(&bh, MV64x60_CPU_CONFIG, (1 << 13)); - /* Enable Snoop Pipelineing */ + /* Enable Snoop Pipelining */ mv64x60_set_bits(&bh, MV64360_D_UNIT_CONTROL_HIGH, (1 << 24)); /* diff --git a/arch/ppc/platforms/katana.c b/arch/ppc/platforms/katana.c index 720f8b3e2fbc508b9aa42cc321c32a9b9397d504..c289e9f1b251c6e83747859ee119abd07e2151d0 100644 --- a/arch/ppc/platforms/katana.c +++ b/arch/ppc/platforms/katana.c @@ -880,7 +880,7 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, * are non-zero, then we should use the board info from the bd_t * structure and the cmdline pointed to by r6 instead of the * information from birecs, if any. Otherwise, use the information - * from birecs as discovered by the preceeding call to + * from birecs as discovered by the preceding call to * parse_bootinfo(). This rule should work with both PPCBoot, which * uses a bd_t board info structure, and the kernel boot wrapper, * which uses birecs. diff --git a/arch/ppc/platforms/mbx.h b/arch/ppc/platforms/mbx.h index fe81ca4ea0a224bb6bb51b257ffa80cb4d5ead40..1cf36fa3592d30dd45f20480d413f054ec6e4734 100644 --- a/arch/ppc/platforms/mbx.h +++ b/arch/ppc/platforms/mbx.h @@ -37,7 +37,7 @@ typedef struct bd_info { /* Memory map for the MBX as configured by EPPC-Bug. We could reprogram * The SIU and PCI bridge, and try to use larger MMU pages, but the - * performance gain is not measureable and it certainly complicates the + * performance gain is not measurable and it certainly complicates the * generic MMU model. * * In a effort to minimize memory usage for embedded applications, any diff --git a/arch/ppc/platforms/mvme5100.h b/arch/ppc/platforms/mvme5100.h index 9e2a09e636ae9813050980ab185cd32cd8a933ea..fbb5495165c7623d90bbf9c0274440d6d88f5b6a 100644 --- a/arch/ppc/platforms/mvme5100.h +++ b/arch/ppc/platforms/mvme5100.h @@ -69,7 +69,7 @@ #define STD_COM_FLAGS ASYNC_BOOT_AUTOCONF -/* All UART IRQ's are wire-OR'd to one MPIC IRQ */ +/* All UART IRQs are wire-OR'd to one MPIC IRQ */ #define STD_SERIAL_PORT_DFNS \ { 0, BASE_BAUD, MVME5100_SERIAL_1, \ MVME5100_SERIAL_IRQ, \ diff --git a/arch/ppc/platforms/pplus.h b/arch/ppc/platforms/pplus.h index a07cbbdd72c68df7410e79b4cb47e2830790e23b..a4bbaa8d858fcac7f5d36a357bc9283a66ec54d7 100644 --- a/arch/ppc/platforms/pplus.h +++ b/arch/ppc/platforms/pplus.h @@ -18,7 +18,7 @@ #include /* - * Due to limiations imposed by legacy hardware (primaryily IDE controllers), + * Due to limitations imposed by legacy hardware (primarily IDE controllers), * the PPLUS boards operate using a PReP address map. * * From Processor (physical) -> PCI: diff --git a/arch/ppc/platforms/prep_pci.c b/arch/ppc/platforms/prep_pci.c index c627ba41335fb994b1a8967cd1bbc02a36b21bf7..1df3150f016eadb812c079f5724352ccc63c8ad3 100644 --- a/arch/ppc/platforms/prep_pci.c +++ b/arch/ppc/platforms/prep_pci.c @@ -589,9 +589,9 @@ static unsigned char prep_pci_intpins[4][4] = { 4, 1, 2, 3}, /* Buses 3, 7, 11 ... */ }; -/* We have to turn on LEVEL mode for changed IRQ's */ -/* All PCI IRQ's need to be level mode, so this should be something - * other than hard-coded as well... IRQ's are individually mappable +/* We have to turn on LEVEL mode for changed IRQs */ +/* All PCI IRQs need to be level mode, so this should be something + * other than hard-coded as well... IRQs are individually mappable * to either edge or level. */ @@ -923,8 +923,8 @@ prep_sandalfoot_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi) Motherboard_map_name = "IBM 6015/7020 (Sandalfoot/Sandalbow)"; Motherboard_map = ibm6015_pci_IRQ_map; Motherboard_routes = ibm6015_pci_IRQ_routes; - *irq_edge_mask_lo = 0x00; /* irq's 0-7 all edge-triggered */ - *irq_edge_mask_hi = 0xA0; /* irq's 13, 15 level-triggered */ + *irq_edge_mask_lo = 0x00; /* IRQs 0-7 all edge-triggered */ + *irq_edge_mask_hi = 0xA0; /* IRQs 13, 15 level-triggered */ } void __init @@ -933,8 +933,8 @@ prep_thinkpad_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi) Motherboard_map_name = "IBM Thinkpad 850/860"; Motherboard_map = Nobis_pci_IRQ_map; Motherboard_routes = Nobis_pci_IRQ_routes; - *irq_edge_mask_lo = 0x00; /* irq's 0-7 all edge-triggered */ - *irq_edge_mask_hi = 0xA0; /* irq's 13, 15 level-triggered */ + *irq_edge_mask_lo = 0x00; /* IRQs 0-7 all edge-triggered */ + *irq_edge_mask_hi = 0xA0; /* IRQs 13, 15 level-triggered */ } void __init @@ -943,8 +943,8 @@ prep_carolina_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi) Motherboard_map_name = "IBM 7248, PowerSeries 830/850 (Carolina)"; Motherboard_map = ibm8xx_pci_IRQ_map; Motherboard_routes = ibm8xx_pci_IRQ_routes; - *irq_edge_mask_lo = 0x00; /* irq's 0-7 all edge-triggered */ - *irq_edge_mask_hi = 0xA4; /* irq's 10, 13, 15 level-triggered */ + *irq_edge_mask_lo = 0x00; /* IRQs 0-7 all edge-triggered */ + *irq_edge_mask_hi = 0xA4; /* IRQs 10, 13, 15 level-triggered */ } void __init @@ -954,8 +954,8 @@ prep_tiger1_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi) Motherboard_map = ibm43p_pci_IRQ_map; Motherboard_routes = ibm43p_pci_IRQ_routes; Motherboard_non0 = ibm43p_pci_map_non0; - *irq_edge_mask_lo = 0x00; /* irq's 0-7 all edge-triggered */ - *irq_edge_mask_hi = 0xA0; /* irq's 13, 15 level-triggered */ + *irq_edge_mask_lo = 0x00; /* IRQs 0-7 all edge-triggered */ + *irq_edge_mask_hi = 0xA0; /* IRQs 13, 15 level-triggered */ } void __init diff --git a/arch/ppc/platforms/prep_setup.c b/arch/ppc/platforms/prep_setup.c index f166299571d63a962e4008c48e988d29d7d51cc5..6f21110a9747ef20b216edf38b5701eb91c12e0f 100644 --- a/arch/ppc/platforms/prep_setup.c +++ b/arch/ppc/platforms/prep_setup.c @@ -593,7 +593,7 @@ static void __init prep_init_sound(void) PPC_DEVICE *audiodevice = NULL; /* - * Get the needed resource informations from residual data. + * Get the needed resource information from residual data. * */ if (have_residual_data) @@ -632,9 +632,9 @@ static void __init prep_init_sound(void) } /* - * Find a way to push these informations to the cs4232 driver + * Find a way to push this information to the cs4232 driver * Give it out with printk, when not in cmd_line? - * Append it to cmd_line and boot_command_line? + * Append it to cmd_line and boot_command_line? * Format is cs4232=io,irq,dma,dma2 */ } diff --git a/arch/ppc/platforms/prpmc750.h b/arch/ppc/platforms/prpmc750.h index 4c7adcc9ae33eff352c807edfbae98544d81bab9..c4dcff09d7cabea8ce217eb0bffc5ec30562b732 100644 --- a/arch/ppc/platforms/prpmc750.h +++ b/arch/ppc/platforms/prpmc750.h @@ -16,7 +16,7 @@ #define __ASM_PRPMC750_H__ /* - * Due to limiations imposed by legacy hardware (primaryily IDE controllers), + * Due to limitations imposed by legacy hardware (primarily IDE controllers), * the PrPMC750 carrier board operates using a PReP address map. * * From Processor (physical) -> PCI: diff --git a/arch/ppc/platforms/radstone_ppc7d.c b/arch/ppc/platforms/radstone_ppc7d.c index 13d70ab50bf15f246fc6eefa82656a98a8187350..b55860734a722b03d4ba1f8a85d877fbd5d96417 100644 --- a/arch/ppc/platforms/radstone_ppc7d.c +++ b/arch/ppc/platforms/radstone_ppc7d.c @@ -1371,7 +1371,7 @@ void __init platform_init(unsigned long r3, unsigned long r4, unsigned long r5, * are non-zero, then we should use the board info from the bd_t * structure and the cmdline pointed to by r6 instead of the * information from birecs, if any. Otherwise, use the information - * from birecs as discovered by the preceeding call to + * from birecs as discovered by the preceding call to * parse_bootinfo(). This rule should work with both PPCBoot, which * uses a bd_t board info structure, and the kernel boot wrapper, * which uses birecs. diff --git a/arch/ppc/platforms/sandpoint.c b/arch/ppc/platforms/sandpoint.c index a76002af686ff9416f35a1d7964fb7bf5b9b2d8f..3352fae1c7225fad4efb7f56a8e6fbb4e951e3ae 100644 --- a/arch/ppc/platforms/sandpoint.c +++ b/arch/ppc/platforms/sandpoint.c @@ -54,7 +54,7 @@ * * * Motorola has finally released a version of DINK32 that correctly - * (seemingly) initalizes the memory controller correctly, regardless + * (seemingly) initializes the memory controller correctly, regardless * of the amount of memory in the system. Once a method of determining * what version of DINK initializes the system for us, if applicable, is * found, we can hopefully stop hardcoding 32MB of RAM. @@ -473,7 +473,7 @@ sandpoint_request_io(void) arch_initcall(sandpoint_request_io); /* - * Interrupt setup and service. Interrrupts on the Sandpoint come + * Interrupt setup and service. Interrupts on the Sandpoint come * from the four PCI slots plus the 8259 in the Winbond Super I/O (SIO). * The 8259 is cascaded from EPIC IRQ0, IRQ1-4 map to PCI slots 1-4, * IDE is on EPIC 7 and 8. @@ -505,7 +505,7 @@ sandpoint_find_end_of_memory(void) if (bp->bi_memsize) return bp->bi_memsize; - /* DINK32 13.0 correctly initalizes things, so iff you use + /* DINK32 13.0 correctly initializes things, so iff you use * this you _should_ be able to change this instead of a * hardcoded value. */ #if 0 @@ -677,7 +677,7 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, * are non-zero, then we should use the board info from the bd_t * structure and the cmdline pointed to by r6 instead of the * information from birecs, if any. Otherwise, use the information - * from birecs as discovered by the preceeding call to + * from birecs as discovered by the preceding call to * parse_bootinfo(). This rule should work with both PPCBoot, which * uses a bd_t board info structure, and the kernel boot wrapper, * which uses birecs. diff --git a/arch/ppc/syslib/harrier.c b/arch/ppc/syslib/harrier.c index c1583f4883254b81fff33f7562008d47004eaad0..45b797b3a3368b2d7c866da25f8d628e9649ca3d 100644 --- a/arch/ppc/syslib/harrier.c +++ b/arch/ppc/syslib/harrier.c @@ -210,7 +210,7 @@ harrier_init(struct pci_controller *hose, * This assumes that PPCBug has initialized the memory controller (SMC) * on the Harrier correctly (i.e., it does no sanity checking). * It also assumes that the memory base registers are set to configure the - * memory as contigous starting with "RAM A BASE", "RAM B BASE", etc. + * memory as contiguous starting with "RAM A BASE", "RAM B BASE", etc. * however, RAM base registers can be skipped (e.g. A, B, C are set, * D is skipped but E is set is okay). */ diff --git a/arch/ppc/syslib/hawk_common.c b/arch/ppc/syslib/hawk_common.c index c5bf16b0d6a182327372a478c82496d9730b43a5..86821d8753ed125726e9574ba3a671134a84a252 100644 --- a/arch/ppc/syslib/hawk_common.c +++ b/arch/ppc/syslib/hawk_common.c @@ -165,7 +165,7 @@ hawk_init(struct pci_controller *hose, processor_pci_mem_start + hose->mem_space.start) | 0x0); - /* Map MPIC into vitual memory */ + /* Map MPIC into virtual memory */ OpenPIC_Addr = ioremap(processor_mpic_base, HAWK_MPIC_SIZE); return 0; @@ -176,7 +176,7 @@ hawk_init(struct pci_controller *hose, * This assumes that PPCBug has initialized the memory controller (SMC) * on the Falcon/HAWK correctly (i.e., it does no sanity checking). * It also assumes that the memory base registers are set to configure the - * memory as contigous starting with "RAM A BASE", "RAM B BASE", etc. + * memory as contiguous starting with "RAM A BASE", "RAM B BASE", etc. * however, RAM base registers can be skipped (e.g. A, B, C are set, * D is skipped but E is set is okay). */ diff --git a/arch/ppc/syslib/m82xx_pci.c b/arch/ppc/syslib/m82xx_pci.c index e3b586b1ede9c6cb122fbb721c9e293636092254..fe860d52e2e4c1e3d6a2c2a9cc41fe96bb98e519 100644 --- a/arch/ppc/syslib/m82xx_pci.c +++ b/arch/ppc/syslib/m82xx_pci.c @@ -197,7 +197,7 @@ pq2ads_setup_pci(struct pci_controller *hose) CPM high 0b0000 CPM middle 0b0001 CPM low 0b0010 - PCI reguest 0b0011 + PCI request 0b0011 Reserved 0b0100 Reserved 0b0101 Internal Core 0b0110 diff --git a/arch/ppc/syslib/mpc10x_common.c b/arch/ppc/syslib/mpc10x_common.c index 2fc7c4150a18890f94c6fc851e0ab6f66a18419b..437a294527a9b52be26dcf3e3bda190f6894f2fe 100644 --- a/arch/ppc/syslib/mpc10x_common.c +++ b/arch/ppc/syslib/mpc10x_common.c @@ -432,7 +432,7 @@ mpc10x_bridge_init(struct pci_controller *hose, phys_eumb_base); } - /* IRQ's are determined at runtime */ + /* IRQs are determined at runtime */ ppc_sys_platform_devices[MPC10X_IIC1].resource[1].start = MPC10X_I2C_IRQ; ppc_sys_platform_devices[MPC10X_IIC1].resource[1].end = MPC10X_I2C_IRQ; ppc_sys_platform_devices[MPC10X_DMA0].resource[1].start = MPC10X_DMA0_IRQ; @@ -646,7 +646,7 @@ void __init mpc10x_set_openpic(void) openpic_set_sources(EPIC_IRQ_BASE, 3, OpenPIC_Addr + 0x11020); /* Skip reserved space and map Message Unit Interrupt (I2O) */ openpic_set_sources(EPIC_IRQ_BASE + 3, 1, OpenPIC_Addr + 0x110C0); - /* Skip reserved space and map Serial Interupts */ + /* Skip reserved space and map Serial Interrupts */ openpic_set_sources(EPIC_IRQ_BASE + 4, 2, OpenPIC_Addr + 0x11120); openpic_init(NUM_8259_INTERRUPTS); diff --git a/arch/ppc/syslib/mpc52xx_setup.c b/arch/ppc/syslib/mpc52xx_setup.c index 80c609019bdac01b7492d5d4e72a4d6d65df8bf2..ecfa2c0f8ba35164534f7b077f7dcae4ed6f0aad 100644 --- a/arch/ppc/syslib/mpc52xx_setup.c +++ b/arch/ppc/syslib/mpc52xx_setup.c @@ -252,7 +252,7 @@ mpc52xx_setup_cpu(void) out_be32(&xlb->snoop_window, MPC52xx_PCI_TARGET_MEM | 0x1d); /* Disable XLB pipelining */ - /* (cfr errate 292. We could do this only just before ATA PIO + /* (cfr errata 292. We could do this only just before ATA PIO transaction and re-enable it after ...) */ out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_PLDIS); diff --git a/arch/ppc/syslib/mpc8xx_devices.c b/arch/ppc/syslib/mpc8xx_devices.c index 31fb56593d179b295fbab1c54aa809eeedf67581..c05ac87ece4cb9516489e61b6ad1f1e3fb01ccc7 100644 --- a/arch/ppc/syslib/mpc8xx_devices.c +++ b/arch/ppc/syslib/mpc8xx_devices.c @@ -21,7 +21,7 @@ #include #include -/* We use offsets for IORESOURCE_MEM to do not set dependences at compile time. +/* We use offsets for IORESOURCE_MEM to do not set dependencies at compile time. * They will get fixed up by mach_mpc8xx_fixup */ diff --git a/arch/ppc/syslib/mv64x60.c b/arch/ppc/syslib/mv64x60.c index a6f8b686ea83619f8e2a91f14c34ff0ad151c153..8485a68cd4753ade53df7dcce6771b44d02d9387 100644 --- a/arch/ppc/syslib/mv64x60.c +++ b/arch/ppc/syslib/mv64x60.c @@ -490,7 +490,7 @@ static struct platform_device *mv64x60_pd_devs[] __initdata = { /* * mv64x60_init() * - * Initialze the bridge based on setting passed in via 'si'. The bridge + * Initialize the bridge based on setting passed in via 'si'. The bridge * handle, 'bh', will be set so that it can be used to make subsequent * calls to routines in this file. */ @@ -1704,7 +1704,7 @@ gt64260_disable_all_windows(struct mv64x60_handle *bh, /* * gt64260a_chip_specific_init() * - * Implement errata work arounds for the GT64260A. + * Implement errata workarounds for the GT64260A. */ static void __init gt64260a_chip_specific_init(struct mv64x60_handle *bh, @@ -1776,7 +1776,7 @@ gt64260a_chip_specific_init(struct mv64x60_handle *bh, /* * gt64260b_chip_specific_init() * - * Implement errata work arounds for the GT64260B. + * Implement errata workarounds for the GT64260B. */ static void __init gt64260b_chip_specific_init(struct mv64x60_handle *bh, @@ -2316,7 +2316,7 @@ mv64360_set_mpsc2regs_window(struct mv64x60_handle *bh, u32 base) /* * mv64360_chip_specific_init() * - * Implement errata work arounds for the MV64360. + * Implement errata workarounds for the MV64360. */ static void __init mv64360_chip_specific_init(struct mv64x60_handle *bh, @@ -2336,7 +2336,7 @@ mv64360_chip_specific_init(struct mv64x60_handle *bh, /* * mv64460_chip_specific_init() * - * Implement errata work arounds for the MV64460. + * Implement errata workarounds for the MV64460. */ static void __init mv64460_chip_specific_init(struct mv64x60_handle *bh, diff --git a/arch/ppc/syslib/ocp.c b/arch/ppc/syslib/ocp.c index 50c55622ece9b7d29719877e98e573357431a0b3..491fe9a572293f78df894d2a7ed2c9650e649143 100644 --- a/arch/ppc/syslib/ocp.c +++ b/arch/ppc/syslib/ocp.c @@ -27,7 +27,7 @@ * device model. The devices on the OCP bus are seeded by an * an initial OCP device array created by the arch-specific * Device entries can be added/removed/modified through OCP - * helper functions to accomodate system and board-specific + * helper functions to accommodate system and board-specific * parameters commonly found in embedded systems. OCP also * provides a standard method for devices to describe extended * attributes about themselves to the system. A standard access diff --git a/arch/ppc/syslib/ppc403_pic.c b/arch/ppc/syslib/ppc403_pic.c index 607ebd111d44b6b0241b9e55acf6632ac198094c..c3b7b8bfbcfe164f92b18a9627b8d06b7823ef5f 100644 --- a/arch/ppc/syslib/ppc403_pic.c +++ b/arch/ppc/syslib/ppc403_pic.c @@ -112,7 +112,7 @@ ppc4xx_pic_init(void) /* * Disable all external interrupts until they are - * explicity requested. + * explicitly requested. */ ppc_cached_irq_mask[0] = 0; diff --git a/arch/ppc/syslib/ppc405_pci.c b/arch/ppc/syslib/ppc405_pci.c index d6d838b16dacf65542fcfb532ef5fb3cd58ed009..9e9035693bfaa085328ec13d33a9419b7fa43c3f 100644 --- a/arch/ppc/syslib/ppc405_pci.c +++ b/arch/ppc/syslib/ppc405_pci.c @@ -137,7 +137,7 @@ ppc4xx_find_bridges(void) hose_a->pci_mem_offset = 0; /* Setup bridge memory/IO ranges & resources - * TODO: Handle firmwares setting up a legacy ISA mem base + * TODO: Handle firmware setting up a legacy ISA mem base */ hose_a->io_space.start = PPC405_PCI_LOWER_IO; hose_a->io_space.end = PPC405_PCI_UPPER_IO; diff --git a/arch/ppc/syslib/ppc4xx_dma.c b/arch/ppc/syslib/ppc4xx_dma.c index 1eef4ffed4fb6dc44a8fc487a7e597dd8638bd0f..bd301868996b9134715a218b5d58e3d665056dd9 100644 --- a/arch/ppc/syslib/ppc4xx_dma.c +++ b/arch/ppc/syslib/ppc4xx_dma.c @@ -241,7 +241,7 @@ ppc4xx_set_dma_count(unsigned int dmanr, unsigned int count) } /* - * Returns the number of bytes left to be transfered. + * Returns the number of bytes left to be transferred. * After a DMA transfer, this should return zero. * Reading this while a DMA transfer is still in progress will return * unpredictable results. diff --git a/arch/ppc/syslib/ppc85xx_rio.c b/arch/ppc/syslib/ppc85xx_rio.c index 2b097800cdd971945a883d80d5a0567649e3ca15..af2425e4655fbb6830d4cbb3891fb8e4ef3d9715 100644 --- a/arch/ppc/syslib/ppc85xx_rio.c +++ b/arch/ppc/syslib/ppc85xx_rio.c @@ -349,7 +349,7 @@ EXPORT_SYMBOL_GPL(rio_hw_add_outb_message); * @dev_instance: Pointer to interrupt-specific data * * Handles outbound message interrupts. Executes a register outbound - * mailbox event handler and acks the interrupt occurence. + * mailbox event handler and acks the interrupt occurrence. */ static irqreturn_t mpc85xx_rio_tx_handler(int irq, void *dev_instance) @@ -516,7 +516,7 @@ void rio_close_outb_mbox(struct rio_mport *mport, int mbox) * @dev_instance: Pointer to interrupt-specific data * * Handles inbound message interrupts. Executes a registered inbound - * mailbox event handler and acks the interrupt occurence. + * mailbox event handler and acks the interrupt occurrence. */ static irqreturn_t mpc85xx_rio_rx_handler(int irq, void *dev_instance) diff --git a/arch/ppc/syslib/xilinx_pic.c b/arch/ppc/syslib/xilinx_pic.c index 6fd4cdbada72a3fb15ad0a19b1965724333a77e2..3b82333e96d8089103fee68334ee92feac0f5cda 100644 --- a/arch/ppc/syslib/xilinx_pic.c +++ b/arch/ppc/syslib/xilinx_pic.c @@ -130,7 +130,7 @@ ppc4xx_pic_init(void) /* * Disable all external interrupts until they are - * explicity requested. + * explicitly requested. */ intc_out_be32(intc + IER, 0); diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 8a7f9e9fb8d853fa4c28e5c341fb4adbe572dbeb..fb99cd445504859f16c027475863059302ac70d2 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2303,7 +2303,7 @@ config UGETH_TX_ON_DEMAND config MV643XX_ETH tristate "MV-643XX Ethernet support" - depends on MOMENCO_OCELOT_C || MOMENCO_JAGUAR_ATX || MV64360 || MOMENCO_OCELOT_3 || (PPC_MULTIPLATFORM && PPC32) + depends on MOMENCO_OCELOT_C || MOMENCO_JAGUAR_ATX || MV64360 || MV64X60 || MOMENCO_OCELOT_3 || (PPC_MULTIPLATFORM && PPC32) select MII help This driver supports the gigabit Ethernet on the Marvell MV643XX