Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 aef4b9aa 编写于 作者: L Linus Torvalds
浏览文件
操作

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc 

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Don't export cvt_fd & _df when CONFIG_PPC_FPU is not set
  powerpc/44x: icon: select SM502 and frame buffer console support
  powerpc/85xx: Add P1021MDS board support
  powerpc/85xx: Change MPC8572DS camp dtses for MSI sharing
  powerpc/fsl_msi: add removal path and probe failing path
  powerpc/fsl_msi: enable msi sharing through AMP OSes
  powerpc/fsl_msi: enable msi allocation in all banks
  powerpc/fsl_msi: fix the conflict of virt_msir's chip_data
  powerpc/fsl_msi: Add multiple MSI bank support
  powerpc/kexec: Add support for FSL-BookE
  powerpc/fsl-booke: Move the entry setup code into a seperate file
  powerpc/fsl-booke: fix the case where we are not in the first page
  powerpc/85xx: Enable support for ports 3 and 4 on 8548 CDS
  powerpc/fsl-booke: Add hibernation support for FSL BookE processors
  powerpc/e500mc: Implement machine check handler.
  powerpc/44x: Add basic ICON PPC440SPe board support
  powerpc/44x: Fix UART clocks on 440SPe
  powerpc/44x: Add reset-type to katmai.dts
  powerpc/44x: Adding PCI-E support for PowerPC 460SX based SOC.
上级 709d015b a7fed9f7
隐藏空白更改
内联 并排
Showing with 3712 addition and 258 deletion
arch/powerpc/Kconfig
浏览文件 @ aef4b9aa
......@@ -351,7 +351,7 @@ config ARCH_ENABLE_MEMORY_HOTREMOVE
config KEXEC
bool "kexec system call (EXPERIMENTAL)"
depends on PPC_BOOK3S && EXPERIMENTAL
depends on (PPC_BOOK3S || (FSL_BOOKE && !SMP)) && EXPERIMENTAL
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
......
arch/powerpc/boot/4xx.c
浏览文件 @ aef4b9aa
......@@ -519,7 +519,7 @@ void ibm440ep_fixup_clocks(unsigned int sys_clk,
{
unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 0);
/* serial clocks beed fixup based on int/ext */
/* serial clocks need fixup based on int/ext */
eplike_fixup_uart_clk(0, "/plb/opb/serial@ef600300", ser_clk, plb_clk);
eplike_fixup_uart_clk(1, "/plb/opb/serial@ef600400", ser_clk, plb_clk);
eplike_fixup_uart_clk(2, "/plb/opb/serial@ef600500", ser_clk, plb_clk);
......@@ -532,7 +532,7 @@ void ibm440gx_fixup_clocks(unsigned int sys_clk,
{
unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 1);
/* serial clocks beed fixup based on int/ext */
/* serial clocks need fixup based on int/ext */
eplike_fixup_uart_clk(0, "/plb/opb/serial@40000200", ser_clk, plb_clk);
eplike_fixup_uart_clk(1, "/plb/opb/serial@40000300", ser_clk, plb_clk);
}
......@@ -543,10 +543,10 @@ void ibm440spe_fixup_clocks(unsigned int sys_clk,
{
unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 1);
/* serial clocks beed fixup based on int/ext */
eplike_fixup_uart_clk(0, "/plb/opb/serial@10000200", ser_clk, plb_clk);
eplike_fixup_uart_clk(1, "/plb/opb/serial@10000300", ser_clk, plb_clk);
eplike_fixup_uart_clk(2, "/plb/opb/serial@10000600", ser_clk, plb_clk);
/* serial clocks need fixup based on int/ext */
eplike_fixup_uart_clk(0, "/plb/opb/serial@f0000200", ser_clk, plb_clk);
eplike_fixup_uart_clk(1, "/plb/opb/serial@f0000300", ser_clk, plb_clk);
eplike_fixup_uart_clk(2, "/plb/opb/serial@f0000600", ser_clk, plb_clk);
}
void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk)
......
arch/powerpc/boot/dts/icon.dts 0 → 100644
浏览文件 @ aef4b9aa
/*
* Device Tree Source for Mosaix Technologies, Inc. ICON board
*
* Copyright 2010 DENX Software Engineering, Stefan Roese <sr@denx.de>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without
* any warranty of any kind, whether express or implied.
*/
/dts-v1/;
/ {
#address-cells = <2>;
#size-cells = <2>;
model = "mosaixtech,icon";
compatible = "mosaixtech,icon";
dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC0;
serial0 = &UART0;
serial1 = &UART1;
serial2 = &UART2;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
model = "PowerPC,440SPe";
reg = <0x00000000>;
clock-frequency = <0>; /* Filled in by U-Boot */
timebase-frequency = <0>; /* Filled in by U-Boot */
i-cache-line-size = <32>;
d-cache-line-size = <32>;
i-cache-size = <32768>;
d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
reset-type = <2>; /* Use chip-reset */
};
};
memory {
device_type = "memory";
reg = <0x0 0x00000000 0x0 0x00000000>; /* Filled in by U-Boot */
};
UIC0: interrupt-controller0 {
compatible = "ibm,uic-440spe","ibm,uic";
interrupt-controller;
cell-index = <0>;
dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
};
UIC1: interrupt-controller1 {
compatible = "ibm,uic-440spe","ibm,uic";
interrupt-controller;
cell-index = <1>;
dcr-reg = <0x0d0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
UIC2: interrupt-controller2 {
compatible = "ibm,uic-440spe","ibm,uic";
interrupt-controller;
cell-index = <2>;
dcr-reg = <0x0e0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
UIC3: interrupt-controller3 {
compatible = "ibm,uic-440spe","ibm,uic";
interrupt-controller;
cell-index = <3>;
dcr-reg = <0x0f0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
SDR0: sdr {
compatible = "ibm,sdr-440spe";
dcr-reg = <0x00e 0x002>;
};
CPR0: cpr {
compatible = "ibm,cpr-440spe";
dcr-reg = <0x00c 0x002>;
};
MQ0: mq {
compatible = "ibm,mq-440spe";
dcr-reg = <0x040 0x020>;
};
plb {
compatible = "ibm,plb-440spe", "ibm,plb-440gp", "ibm,plb4";
#address-cells = <2>;
#size-cells = <1>;
/* addr-child addr-parent size */
ranges = <0x4 0x00100000 0x4 0x00100000 0x00001000
0x4 0x00200000 0x4 0x00200000 0x00000400
0x4 0xe0000000 0x4 0xe0000000 0x20000000
0xc 0x00000000 0xc 0x00000000 0x20000000
0xd 0x00000000 0xd 0x00000000 0x80000000
0xd 0x80000000 0xd 0x80000000 0x80000000
0xe 0x00000000 0xe 0x00000000 0x80000000
0xe 0x80000000 0xe 0x80000000 0x80000000
0xf 0x00000000 0xf 0x00000000 0x80000000
0xf 0x80000000 0xf 0x80000000 0x80000000>;
clock-frequency = <0>; /* Filled in by U-Boot */
SDRAM0: sdram {
compatible = "ibm,sdram-440spe", "ibm,sdram-405gp";
dcr-reg = <0x010 0x002>;
};
MAL0: mcmal {
compatible = "ibm,mcmal-440spe", "ibm,mcmal2";
dcr-reg = <0x180 0x062>;
num-tx-chans = <2>;
num-rx-chans = <1>;
interrupt-parent = <&MAL0>;
interrupts = <0x0 0x1 0x2 0x3 0x4>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
interrupt-map = </*TXEOB*/ 0x0 &UIC1 0x6 0x4
/*RXEOB*/ 0x1 &UIC1 0x7 0x4
/*SERR*/ 0x2 &UIC1 0x1 0x4
/*TXDE*/ 0x3 &UIC1 0x2 0x4
/*RXDE*/ 0x4 &UIC1 0x3 0x4>;
};
POB0: opb {
compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xe0000000 0x00000004 0xe0000000 0x20000000>;
clock-frequency = <0>; /* Filled in by U-Boot */
EBC0: ebc {
compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc";
dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; /* Filled in by U-Boot */
/* ranges property is supplied by U-Boot */
interrupts = <0x5 0x1>;
interrupt-parent = <&UIC1>;
nor_flash@0,0 {
compatible = "cfi-flash";
bank-width = <2>;
reg = <0x00000000 0x00000000 0x01000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
reg = <0x00000000 0x001e0000>;
};
partition@1e0000 {
label = "dtb";
reg = <0x001e0000 0x00020000>;
};
partition@200000 {
label = "root";
reg = <0x00200000 0x00200000>;
};
partition@400000 {
label = "user";
reg = <0x00400000 0x00b60000>;
};
partition@f60000 {
label = "env";
reg = <0x00f60000 0x00040000>;
};
partition@fa0000 {
label = "u-boot";
reg = <0x00fa0000 0x00060000>;
};
};
SysACE_CompactFlash: sysace@1,0 {
compatible = "xlnx,sysace";
interrupt-parent = <&UIC2>;
interrupts = <24 0x4>;
reg = <0x00000001 0x00000000 0x10000>;
};
};
UART0: serial@f0000200 {
device_type = "serial";
compatible = "ns16550";
reg = <0xf0000200 0x00000008>;
virtual-reg = <0xa0000200>;
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <115200>;
interrupt-parent = <&UIC0>;
interrupts = <0x0 0x4>;
};
UART1: serial@f0000300 {
device_type = "serial";
compatible = "ns16550";
reg = <0xf0000300 0x00000008>;
virtual-reg = <0xa0000300>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC0>;
interrupts = <0x1 0x4>;
};
UART2: serial@f0000600 {
device_type = "serial";
compatible = "ns16550";
reg = <0xf0000600 0x00000008>;
virtual-reg = <0xa0000600>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC1>;
interrupts = <0x5 0x4>;
};
IIC0: i2c@f0000400 {
compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
reg = <0xf0000400 0x00000014>;
interrupt-parent = <&UIC0>;
interrupts = <0x2 0x4>;
};
IIC1: i2c@f0000500 {
compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
reg = <0xf0000500 0x00000014>;
interrupt-parent = <&UIC0>;
interrupts = <0x3 0x4>;
#address-cells = <1>;
#size-cells = <0>;
rtc@68 {
compatible = "stm,m41t00";
reg = <0x68>;
};
};
EMAC0: ethernet@f0000800 {
linux,network-index = <0x0>;
device_type = "network";
compatible = "ibm,emac-440spe", "ibm,emac4";
interrupt-parent = <&UIC1>;
interrupts = <0x1c 0x4 0x1d 0x4>;
reg = <0xf0000800 0x00000074>;
local-mac-address = [000000000000];
mal-device = <&MAL0>;
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
phy-mode = "gmii";
phy-map = <0x00000000>;
has-inverted-stacr-oc;
has-new-stacr-staopc;
};
};
PCIX0: pci@c0ec00000 {
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
compatible = "ibm,plb-pcix-440spe", "ibm,plb-pcix";
primary;
large-inbound-windows;
enable-msi-hole;
reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */
0x00000000 0x00000000 0x00000000 /* no IACK cycles */
0x0000000c 0x0ed00000 0x00000004 /* Special cycles */
0x0000000c 0x0ec80000 0x00000100 /* Internal registers */
0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
/* Inbound 4GB range starting at 0 */
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
/* This drives busses 0 to 0xf */
bus-range = <0x0 0xf>;
/* PCI-X interrupt (SM502) is routed to extIRQ10 (UIC1, 19) */
interrupt-map-mask = <0x0 0x0 0x0 0x0>;
interrupt-map = <0x0 0x0 0x0 0x0 &UIC1 19 0x8>;
};
PCIE0: pciex@d00000000 {
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
primary;
port = <0x0>; /* port number */
reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */
0x0000000c 0x10000000 0x00001000>; /* Registers */
dcr-reg = <0x100 0x020>;
sdr-base = <0x300>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
/* Inbound 4GB range starting at 0 */
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
/* This drives busses 0x10 to 0x1f */
bus-range = <0x10 0x1f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
* We are de-swizzling here because the numbers are actually for
* port of the root complex virtual P2P bridge. But I want
* to avoid putting a node for it in the tree, so the numbers
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */
0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */
0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */
0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>;
};
PCIE1: pciex@d20000000 {
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
primary;
port = <0x1>; /* port number */
reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */
0x0000000c 0x10001000 0x00001000>; /* Registers */
dcr-reg = <0x120 0x020>;
sdr-base = <0x340>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
/* Inbound 4GB range starting at 0 */
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
/* This drives busses 0x20 to 0x2f */
bus-range = <0x20 0x2f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
* We are de-swizzling here because the numbers are actually for
* port of the root complex virtual P2P bridge. But I want
* to avoid putting a node for it in the tree, so the numbers
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */
0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */
0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */
0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>;
};
I2O: i2o@400100000 {
compatible = "ibm,i2o-440spe";
reg = <0x00000004 0x00100000 0x100>;
dcr-reg = <0x060 0x020>;
};
DMA0: dma0@400100100 {
compatible = "ibm,dma-440spe";
cell-index = <0>;
reg = <0x00000004 0x00100100 0x100>;
dcr-reg = <0x060 0x020>;
interrupt-parent = <&DMA0>;
interrupts = <0 1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
interrupt-map = <
0 &UIC0 0x14 4
1 &UIC1 0x16 4>;
};
DMA1: dma1@400100200 {
compatible = "ibm,dma-440spe";
cell-index = <1>;
reg = <0x00000004 0x00100200 0x100>;
dcr-reg = <0x060 0x020>;
interrupt-parent = <&DMA1>;
interrupts = <0 1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
interrupt-map = <
0 &UIC0 0x16 4
1 &UIC1 0x16 4>;
};
xor-accel@400200000 {
compatible = "amcc,xor-accelerator";
reg = <0x00000004 0x00200000 0x400>;
interrupt-parent = <&UIC1>;
interrupts = <0x1f 4>;
};
};
chosen {
linux,stdout-path = "/plb/opb/serial@f0000200";
};
};
arch/powerpc/boot/dts/katmai.dts
浏览文件 @ aef4b9aa
......@@ -44,6 +44,7 @@
d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
reset-type = <2>; /* Use chip-reset */
};
};
......
arch/powerpc/boot/dts/mpc8548cds.dts
浏览文件 @ aef4b9aa
......@@ -20,10 +20,8 @@
aliases {
ethernet0 = &enet0;
ethernet1 = &enet1;
/*
ethernet2 = &enet2;
ethernet3 = &enet3;
*/
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
......@@ -254,7 +252,6 @@
};
};
/* eTSEC 3/4 are currently broken
enet2: ethernet@26000 {
#address-cells = <1>;
#size-cells = <1>;
......@@ -310,7 +307,6 @@
};
};
};
*/
serial0: serial@4500 {
cell-index = <0>;
......
arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
浏览文件 @ aef4b9aa
......@@ -215,6 +215,18 @@
clock-frequency = <0>;
};
msi@41600 {
compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
reg = <0x41600 0x80>;
msi-available-ranges = <0 0x80>;
interrupts = <
0xe0 0
0xe1 0
0xe2 0
0xe3 0>;
interrupt-parent = <&mpic>;
};
global-utilities@e0000 { //global utilities block
compatible = "fsl,mpc8572-guts";
reg = <0xe0000 0x1000>;
......@@ -243,8 +255,7 @@
protected-sources = <
31 32 33 37 38 39 /* enet2 enet3 */
76 77 78 79 26 42 /* dma2 pci2 serial*/
0xe0 0xe1 0xe2 0xe3 /* msi */
0xe4 0xe5 0xe6 0xe7
0xe4 0xe5 0xe6 0xe7 /* msi */
>;
};
};
......
arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
浏览文件 @ aef4b9aa
......@@ -154,12 +154,8 @@
msi@41600 {
compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
reg = <0x41600 0x80>;
msi-available-ranges = <0 0x100>;
msi-available-ranges = <0x80 0x80>;
interrupts = <
0xe0 0
0xe1 0
0xe2 0
0xe3 0
0xe4 0
0xe5 0
0xe6 0
......@@ -190,6 +186,7 @@
0x1 0x2 0x3 0x4 /* pci slot */
0x9 0xa 0xb 0xc /* usb */
0x6 0x7 0xe 0x5 /* Audio elgacy SATA */
0xe0 0xe1 0xe2 0xe3 /* msi */
>;
};
};
......
arch/powerpc/boot/dts/p1021mds.dts 0 → 100644
浏览文件 @ aef4b9aa
/*
* P1021 MDS Device Tree Source
*
* Copyright 2010 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/dts-v1/;
/ {
model = "fsl,P1021";
compatible = "fsl,P1021MDS";
#address-cells = <2>;
#size-cells = <2>;
aliases {
serial0 = &serial0;
serial1 = &serial1;
ethernet0 = &enet0;
ethernet1 = &enet1;
ethernet2 = &enet2;
ethernet3 = &enet3;
ethernet4 = &enet4;
pci0 = &pci0;
pci1 = &pci1;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,P1021@0 {
device_type = "cpu";
reg = <0x0>;
next-level-cache = <&L2>;
};
PowerPC,P1021@1 {
device_type = "cpu";
reg = <0x1>;
next-level-cache = <&L2>;
};
};
memory {
device_type = "memory";
};
localbus@ffe05000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus";
reg = <0 0xffe05000 0 0x1000>;
interrupts = <19 2>;
interrupt-parent = <&mpic>;
/* NAND Flash, BCSR, PMC0/1*/
ranges = <0x0 0x0 0x0 0xfc000000 0x02000000
0x1 0x0 0x0 0xf8000000 0x00008000
0x2 0x0 0x0 0xf8010000 0x00020000
0x3 0x0 0x0 0xf8020000 0x00020000>;
nand@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,p1021-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <0x0 0x0 0x40000>;
partition@0 {
/* This location must not be altered */
/* 1MB for u-boot Bootloader Image */
reg = <0x0 0x00100000>;
label = "NAND (RO) U-Boot Image";
read-only;
};
partition@100000 {
/* 1MB for DTB Image */
reg = <0x00100000 0x00100000>;
label = "NAND (RO) DTB Image";
read-only;
};
partition@200000 {
/* 4MB for Linux Kernel Image */
reg = <0x00200000 0x00400000>;
label = "NAND (RO) Linux Kernel Image";
read-only;
};
partition@600000 {
/* 5MB for Compressed Root file System Image */
reg = <0x00600000 0x00500000>;
label = "NAND (RO) Compressed RFS Image";
read-only;
};
partition@b00000 {
/* 6MB for JFFS2 based Root file System */
reg = <0x00a00000 0x00600000>;
label = "NAND (RW) JFFS2 Root File System";
};
partition@1100000 {
/* 14MB for JFFS2 based Root file System */
reg = <0x01100000 0x00e00000>;
label = "NAND (RW) Writable User area";
};
partition@1f00000 {
/* 1MB for microcode */
reg = <0x01f00000 0x00100000>;
label = "NAND (RO) QE Ucode";
read-only;
};
};
bcsr@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,p1021mds-bcsr";
reg = <1 0 0x8000>;
ranges = <0 1 0 0x8000>;
};
pib@2,0 {
compatible = "fsl,p1021mds-pib";
reg = <2 0 0x10000>;
};
pib@3,0 {
compatible = "fsl,p1021mds-pib";
reg = <3 0 0x10000>;
};
};
soc@ffe00000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,p1021-immr", "simple-bus";
ranges = <0x0 0x0 0xffe00000 0x100000>;
bus-frequency = <0>; // Filled out by uboot.
ecm-law@0 {
compatible = "fsl,ecm-law";
reg = <0x0 0x1000>;
fsl,num-laws = <12>;
};
ecm@1000 {
compatible = "fsl,p1021-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
interrupts = <16 2>;
interrupt-parent = <&mpic>;
};
memory-controller@2000 {
compatible = "fsl,p1021-memory-controller";
reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <16 2>;
};
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
rtc@68 {
compatible = "dallas,ds1374";
reg = <0x68>;
};
};
i2c@3100 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
spi@7000 {
cell-index = <0>;
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,espi";
reg = <0x7000 0x1000>;
interrupts = <59 0x2>;
interrupt-parent = <&mpic>;
espi,num-ss-bits = <4>;
mode = "cpu";
fsl_m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,espi-flash";
reg = <0>;
linux,modalias = "fsl_m25p80";
spi-max-frequency = <40000000>; /* input clock */
partition@u-boot {
label = "u-boot-spi";
reg = <0x00000000 0x00100000>;
read-only;
};
partition@kernel {
label = "kernel-spi";
reg = <0x00100000 0x00500000>;
read-only;
};
partition@dtb {
label = "dtb-spi";
reg = <0x00600000 0x00100000>;
read-only;
};
partition@fs {
label = "file system-spi";
reg = <0x00700000 0x00900000>;
};
};
};
gpio: gpio-controller@f000 {
#gpio-cells = <2>;
compatible = "fsl,mpc8572-gpio";
reg = <0xf000 0x100>;
interrupts = <47 0x2>;
interrupt-parent = <&mpic>;
gpio-controller;
};
L2: l2-cache-controller@20000 {
compatible = "fsl,p1021-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x40000>; // L2,256K
interrupt-parent = <&mpic>;
interrupts = <16 2>;
};
dma@21300 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,eloplus-dma";
reg = <0x21300 0x4>;
ranges = <0x0 0x21100 0x200>;
cell-index = <0>;
dma-channel@0 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
interrupt-parent = <&mpic>;
interrupts = <20 2>;
};
dma-channel@80 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
interrupt-parent = <&mpic>;
interrupts = <21 2>;
};
dma-channel@100 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
interrupt-parent = <&mpic>;
interrupts = <22 2>;
};
dma-channel@180 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
interrupt-parent = <&mpic>;
interrupts = <23 2>;
};
};
usb@22000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl-usb2-dr";
reg = <0x22000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <28 0x2>;
phy_type = "ulpi";
};
mdio@24000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,etsec2-mdio";
reg = <0x24000 0x1000 0xb0030 0x4>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <1 1>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
reg = <0x1>;
};
phy4: ethernet-phy@4 {
interrupt-parent = <&mpic>;
reg = <0x4>;
};
};
mdio@25000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,etsec2-tbi";
reg = <0x25000 0x1000 0xb1030 0x4>;
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@B0000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "fsl,etsec2";
fsl,num_rx_queues = <0x8>;
fsl,num_tx_queues = <0x8>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
queue-group@0{
#address-cells = <1>;
#size-cells = <1>;
reg = <0xB0000 0x1000>;
interrupts = <29 2 30 2 34 2>;
};
queue-group@1{
#address-cells = <1>;
#size-cells = <1>;
reg = <0xB4000 0x1000>;
interrupts = <17 2 18 2 24 2>;
};
};
enet1: ethernet@B1000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "fsl,etsec2";
fsl,num_rx_queues = <0x8>;
fsl,num_tx_queues = <0x8>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupt-parent = <&mpic>;
phy-handle = <&phy4>;
tbi-handle = <&tbi0>;
phy-connection-type = "sgmii";
queue-group@0{
#address-cells = <1>;
#size-cells = <1>;
reg = <0xB1000 0x1000>;
interrupts = <35 2 36 2 40 2>;
};
queue-group@1{
#address-cells = <1>;
#size-cells = <1>;
reg = <0xB5000 0x1000>;
interrupts = <51 2 52 2 67 2>;
};
};
enet2: ethernet@B2000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "fsl,etsec2";
fsl,num_rx_queues = <0x8>;
fsl,num_tx_queues = <0x8>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
queue-group@0{
#address-cells = <1>;
#size-cells = <1>;
reg = <0xB2000 0x1000>;
interrupts = <31 2 32 2 33 2>;
};
queue-group@1{
#address-cells = <1>;
#size-cells = <1>;
reg = <0xB6000 0x1000>;
interrupts = <25 2 26 2 27 2>;
};
};
sdhci@2e000 {
compatible = "fsl,p1021-esdhc", "fsl,esdhc";
reg = <0x2e000 0x1000>;
interrupts = <72 0x2>;
interrupt-parent = <&mpic>;
/* Filled in by U-Boot */
clock-frequency = <0>;
};
crypto@30000 {
compatible = "fsl,sec3.3", "fsl,sec3.1",
"fsl,sec3.0", "fsl,sec2.4",
"fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
reg = <0x30000 0x10000>;
interrupts = <45 2 58 2>;
interrupt-parent = <&mpic>;
fsl,num-channels = <4>;
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x97c>;
fsl,descriptor-types-mask = <0x3a30abf>;
};
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
};
msi@41600 {
compatible = "fsl,p1021-msi", "fsl,mpic-msi";
reg = <0x41600 0x80>;
msi-available-ranges = <0 0x100>;
interrupts = <
0xe0 0
0xe1 0
0xe2 0
0xe3 0
0xe4 0
0xe5 0
0xe6 0
0xe7 0>;
interrupt-parent = <&mpic>;
};
global-utilities@e0000 { //global utilities block
compatible = "fsl,p1021-guts";
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
par_io@e0100 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xe0100 0x60>;
ranges = <0x0 0xe0100 0x60>;
device_type = "par_io";
num-ports = <3>;
pio1: ucc_pin@01 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */
0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */
0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9
*/
0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */
0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */
0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */
0x0 0xc 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */
0x0 0x6 0x2 0x0 0x2 0x0 /* ENET1_RXD0_SER1_RXD0 */
0x0 0xa 0x2 0x0 0x2 0x0 /* ENET1_RXD1_SER1_RXD1 */
0x0 0xe 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */
0x0 0xf 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */
0x0 0x5 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */
0x0 0xd 0x1 0x0 0x2 0x0 /* ENET1_TX_ER */
0x0 0x4 0x2 0x0 0x2 0x0 /* ENET1_RX_DV_SER1_CTS_B */
0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RX_ER_SER1_CD_B */
0x0 0x11 0x2 0x0 0x2 0x0 /* ENET1_CRS */
0x0 0x10 0x2 0x0 0x2 0x0>; /* ENET1_COL */
};
pio2: ucc_pin@02 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */
0x1 0xb 0x2 0x0 0x1 0x0 /* CLK13 */
0x1 0x7 0x1 0x0 0x2 0x0 /* ENET5_TXD0_SER5_TXD0 */
0x1 0xa 0x1 0x0 0x2 0x0 /* ENET5_TXD1_SER5_TXD1 */
0x1 0x6 0x2 0x0 0x2 0x0 /* ENET5_RXD0_SER5_RXD0 */
0x1 0x9 0x2 0x0 0x2 0x0 /* ENET5_RXD1_SER5_RXD1 */
0x1 0x5 0x1 0x0 0x2 0x0 /* ENET5_TX_EN_SER5_RTS_B */
0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */
0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */
};
};
};
pci0: pcie@ffe09000 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0 0xffe09000 0 0x1000>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <16 2>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 4 1
0000 0 0 2 &mpic 5 1
0000 0 0 3 &mpic 6 1
0000 0 0 4 &mpic 7 1
>;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci1: pcie@ffe0a000 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0 0xffe0a000 0 0x1000>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <16 2>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 0 1
0000 0 0 2 &mpic 1 1
0000 0 0 3 &mpic 2 1
0000 0 0 4 &mpic 3 1
>;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
qe@ffe80000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "qe";
compatible = "fsl,qe";
ranges = <0x0 0x0 0xffe80000 0x40000>;
reg = <0 0xffe80000 0 0x480>;
brg-frequency = <0>;
bus-frequency = <0>;
fsl,qe-num-riscs = <1>;
fsl,qe-num-snums = <28>;
qeic: interrupt-controller@80 {
interrupt-controller;
compatible = "fsl,qe-ic";
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <0x80 0x80>;
interrupts = <63 2 60 2>; //high:47 low:44
interrupt-parent = <&mpic>;
};
enet3: ucc@2000 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <1>;
reg = <0x2000 0x200>;
interrupts = <32>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "clk12";
tx-clock-name = "clk9";
pio-handle = <&pio1>;
phy-handle = <&qe_phy0>;
phy-connection-type = "mii";
};
mdio@2120 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x2120 0x18>;
compatible = "fsl,ucc-mdio";
qe_phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <4 1>;
reg = <0x0>;
device_type = "ethernet-phy";
};
qe_phy1: ethernet-phy@03 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet4: ucc@2400 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <5>;
reg = <0x2400 0x200>;
interrupts = <40>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk13";
pio-handle = <&pio2>;
phy-handle = <&qe_phy1>;
phy-connection-type = "rmii";
};
muram@10000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,qe-muram", "fsl,cpm-muram";
ranges = <0x0 0x10000 0x6000>;
data-only@0 {
compatible = "fsl,qe-muram-data",
"fsl,cpm-muram-data";
reg = <0x0 0x6000>;
};
};
};
};
arch/powerpc/boot/dts/redwood.dts
浏览文件 @ aef4b9aa
......@@ -234,10 +234,132 @@
has-inverted-stacr-oc;
has-new-stacr-staopc;
};
};
PCIE0: pciex@d00000000 {
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
primary;
port = <0x0>; /* port number */
reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */
0x0000000c 0x10000000 0x00001000>; /* Registers */
dcr-reg = <0x100 0x020>;
sdr-base = <0x300>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 10 to 0x1f */
bus-range = <0x10 0x1f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
* We are de-swizzling here because the numbers are actually for
* port of the root complex virtual P2P bridge. But I want
* to avoid putting a node for it in the tree, so the numbers
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */
0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */
0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */
0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>;
};
PCIE1: pciex@d20000000 {
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
primary;
port = <0x1>; /* port number */
reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */
0x0000000c 0x10001000 0x00001000>; /* Registers */
dcr-reg = <0x120 0x020>;
sdr-base = <0x340>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 10 to 0x1f */
bus-range = <0x20 0x2f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
* We are de-swizzling here because the numbers are actually for
* port of the root complex virtual P2P bridge. But I want
* to avoid putting a node for it in the tree, so the numbers
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */
0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */
0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */
0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>;
};
PCIE2: pciex@d40000000 {
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
primary;
port = <0x2>; /* port number */
reg = <0x0000000d 0x40000000 0x20000000 /* Config space access */
0x0000000c 0x10002000 0x00001000>; /* Registers */
dcr-reg = <0x140 0x020>;
sdr-base = <0x370>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000
0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 10 to 0x1f */
bus-range = <0x30 0x3f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
* We are de-swizzling here because the numbers are actually for
* port of the root complex virtual P2P bridge. But I want
* to avoid putting a node for it in the tree, so the numbers
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
0x0 0x0 0x0 0x1 &UIC3 0x8 0x4 /* swizzled int A */
0x0 0x0 0x0 0x2 &UIC3 0x9 0x4 /* swizzled int B */
0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */
0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>;
};
};
chosen {
linux,stdout-path = "/plb/opb/serial@ef600200";
};
......
arch/powerpc/configs/44x/icon_defconfig 0 → 100644
浏览文件 @ aef4b9aa
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.34-rc7
# Fri May 21 17:40:22 2010
#
# CONFIG_PPC64 is not set
#
# Processor support
#
# CONFIG_PPC_BOOK3S_32 is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_44x=y
# CONFIG_E200 is not set
CONFIG_4xx=y
CONFIG_BOOKE=y
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
CONFIG_PPC_MMU_NOHASH=y
CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_PPC_UDBG_16550=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_PPC_ADV_DEBUG_REGS=y
CONFIG_PPC_ADV_DEBUG_IACS=4
CONFIG_PPC_ADV_DEBUG_DACS=2
CONFIG_PPC_ADV_DEBUG_DVCS=2
CONFIG_PPC_ADV_DEBUG_DAC_RANGE=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
# CONFIG_LOGBUFFER is not set
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_INLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
#
# Platform support
#
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
# CONFIG_BAMBOO is not set
# CONFIG_EBONY is not set
# CONFIG_SAM440EP is not set
# CONFIG_SEQUOIA is not set
# CONFIG_TAISHAN is not set
# CONFIG_KATMAI is not set
# CONFIG_RAINIER is not set
# CONFIG_WARP is not set
# CONFIG_ARCHES is not set
# CONFIG_CANYONLANDS is not set
# CONFIG_GLACIER is not set
# CONFIG_REDWOOD is not set
# CONFIG_EIGER is not set
# CONFIG_YOSEMITE is not set
CONFIG_ICON=y
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
CONFIG_PPC44x_SIMPLE=y
# CONFIG_PPC4xx_GPIO is not set
CONFIG_440SPe=y
CONFIG_STDBINUTILS=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_FSL_ULI1575 is not set
# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
#
CONFIG_HIGHMEM=y
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_SPARSE_IRQ=y
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
CONFIG_EXTRA_TARGETS=""
# CONFIG_ARCH_HAS_NMI_WATCHDOG is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_4xx_SOC=y
CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PHYSMAP_OF=y
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=35000
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_XILINX_SYSACE=y
# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_FUSION=y
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=y
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks.
#
#
# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBM_NEW_EMAC=y
CONFIG_IBM_NEW_EMAC_RXB=128
CONFIG_IBM_NEW_EMAC_TXB=64
CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
# CONFIG_IBM_NEW_EMAC_DEBUG is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
CONFIG_IBM_NEW_EMAC_EMAC4=y
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
# CONFIG_XILINX_EMACLITE is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
# CONFIG_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_PS2_ALPS is not set
# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
# CONFIG_MOUSE_PS2_SYNAPTICS is not set
# CONFIG_MOUSE_PS2_TRACKPOINT is not set
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_BOOTCOUNT is not set
# CONFIG_DISPLAY_PDSP1880 is not set
# CONFIG_MUCMC52_IO is not set
# CONFIG_UC101_IO is not set
# CONFIG_SRAM is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_IBM_IIC=y
# CONFIG_I2C_MPC is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_88PM860X is not set
CONFIG_MFD_SM501=y
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_OF is not set
# CONFIG_FB_CT65550 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
CONFIG_FB_SM501=y
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
#
# Special HID drivers
#
# CONFIG_USB_SUPPORT is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
# CONFIG_STAGING is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_YAFFS_FS is not set
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_CRYPTO_DEV_PPC4XX is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
arch/powerpc/include/asm/cputable.h
浏览文件 @ aef4b9aa
......@@ -70,6 +70,7 @@ struct pt_regs;
extern int machine_check_generic(struct pt_regs *regs);
extern int machine_check_4xx(struct pt_regs *regs);
extern int machine_check_440A(struct pt_regs *regs);
extern int machine_check_e500mc(struct pt_regs *regs);
extern int machine_check_e500(struct pt_regs *regs);
extern int machine_check_e200(struct pt_regs *regs);
extern int machine_check_47x(struct pt_regs *regs);
......
arch/powerpc/include/asm/kexec.h
浏览文件 @ aef4b9aa
......@@ -2,6 +2,18 @@
#define _ASM_POWERPC_KEXEC_H
#ifdef __KERNEL__
#ifdef CONFIG_FSL_BOOKE
/*
* On FSL-BookE we setup a 1:1 mapping which covers the first 2GiB of memory
* and therefore we can only deal with memory within this range
*/
#define KEXEC_SOURCE_MEMORY_LIMIT (2 * 1024 * 1024 * 1024UL)
#define KEXEC_DESTINATION_MEMORY_LIMIT (2 * 1024 * 1024 * 1024UL)
#define KEXEC_CONTROL_MEMORY_LIMIT (2 * 1024 * 1024 * 1024UL)
#else
/*
* Maximum page that is mapped directly into kernel memory.
* XXX: Since we copy virt we can use any page we allocate
......@@ -21,6 +33,7 @@
/* TASK_SIZE, probably left over from use_mm ?? */
#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
#endif
#endif
#define KEXEC_CONTROL_PAGE_SIZE 4096
......
arch/powerpc/include/asm/reg_booke.h
浏览文件 @ aef4b9aa
......@@ -4,6 +4,12 @@
* are not true Book E PowerPCs, they borrowed a number of features
* before Book E was finalized, and are included here as well. Unfortunatly,
* they sometimes used different locations than true Book E CPUs did.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation.
*
* Copyright 2009-2010 Freescale Semiconductor, Inc.
*/
#ifdef __KERNEL__
#ifndef __ASM_POWERPC_REG_BOOKE_H__
......@@ -88,6 +94,7 @@
#define SPRN_IVOR35 0x213 /* Interrupt Vector Offset Register 35 */
#define SPRN_IVOR36 0x214 /* Interrupt Vector Offset Register 36 */
#define SPRN_IVOR37 0x215 /* Interrupt Vector Offset Register 37 */
#define SPRN_MCARU 0x239 /* Machine Check Address Register Upper */
#define SPRN_MCSRR0 0x23A /* Machine Check Save and Restore Register 0 */
#define SPRN_MCSRR1 0x23B /* Machine Check Save and Restore Register 1 */
#define SPRN_MCSR 0x23C /* Machine Check Status Register */
......@@ -196,8 +203,11 @@
#define PPC47x_MCSR_IPR 0x00400000 /* Imprecise Machine Check Exception */
#ifdef CONFIG_E500
/* All e500 */
#define MCSR_MCP 0x80000000UL /* Machine Check Input Pin */
#define MCSR_ICPERR 0x40000000UL /* I-Cache Parity Error */
/* e500v1/v2 */
#define MCSR_DCP_PERR 0x20000000UL /* D-Cache Push Parity Error */
#define MCSR_DCPERR 0x10000000UL /* D-Cache Parity Error */
#define MCSR_BUS_IAERR 0x00000080UL /* Instruction Address Error */
......@@ -209,12 +219,20 @@
#define MCSR_BUS_IPERR 0x00000002UL /* Instruction parity Error */
#define MCSR_BUS_RPERR 0x00000001UL /* Read parity Error */
/* e500 parts may set unused bits in MCSR; mask these off */
#define MCSR_MASK (MCSR_MCP | MCSR_ICPERR | MCSR_DCP_PERR | \
MCSR_DCPERR | MCSR_BUS_IAERR | MCSR_BUS_RAERR | \
MCSR_BUS_WAERR | MCSR_BUS_IBERR | MCSR_BUS_RBERR | \
MCSR_BUS_WBERR | MCSR_BUS_IPERR | MCSR_BUS_RPERR)
/* e500mc */
#define MCSR_DCPERR_MC 0x20000000UL /* D-Cache Parity Error */
#define MCSR_L2MMU_MHIT 0x04000000UL /* Hit on multiple TLB entries */
#define MCSR_NMI 0x00100000UL /* Non-Maskable Interrupt */
#define MCSR_MAV 0x00080000UL /* MCAR address valid */
#define MCSR_MEA 0x00040000UL /* MCAR is effective address */
#define MCSR_IF 0x00010000UL /* Instruction Fetch */
#define MCSR_LD 0x00008000UL /* Load */
#define MCSR_ST 0x00004000UL /* Store */
#define MCSR_LDG 0x00002000UL /* Guarded Load */
#define MCSR_TLBSYNC 0x00000002UL /* Multiple tlbsyncs detected */
#define MCSR_BSL2_ERR 0x00000001UL /* Backside L2 cache error */
#endif
#ifdef CONFIG_E200
#define MCSR_MCP 0x80000000UL /* Machine Check Input Pin */
#define MCSR_CP_PERR 0x20000000UL /* Cache Push Parity Error */
......@@ -225,11 +243,6 @@
#define MCSR_BUS_DRERR 0x00000008UL /* Read Bus Error on data load */
#define MCSR_BUS_WRERR 0x00000004UL /* Write Bus Error on buffered
store or cache line push */
/* e200 parts may set unused bits in MCSR; mask these off */
#define MCSR_MASK (MCSR_MCP | MCSR_CP_PERR | MCSR_CPERR | \
MCSR_EXCP_ERR | MCSR_BUS_IRERR | MCSR_BUS_DRERR | \
MCSR_BUS_WRERR)
#endif
/* Bit definitions for the DBSR. */
......
arch/powerpc/kernel/Makefile
浏览文件 @ aef4b9aa
......@@ -57,8 +57,12 @@ obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
obj-$(CONFIG_E500) += idle_e500.o
obj-$(CONFIG_6xx) += idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o
obj-$(CONFIG_TAU) += tau_6xx.o
obj-$(CONFIG_HIBERNATION) += swsusp.o suspend.o \
swsusp_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_HIBERNATION) += swsusp.o suspend.o
ifeq ($(CONFIG_FSL_BOOKE),y)
obj-$(CONFIG_HIBERNATION) += swsusp_booke.o
else
obj-$(CONFIG_HIBERNATION) += swsusp_$(CONFIG_WORD_SIZE).o
endif
obj64-$(CONFIG_HIBERNATION) += swsusp_asm64.o
obj-$(CONFIG_MODULES) += module.o module_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_44x) += cpu_setup_44x.o
......
arch/powerpc/kernel/cputable.c
浏览文件 @ aef4b9aa
......@@ -1840,7 +1840,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.oprofile_cpu_type = "ppc/e500mc",
.oprofile_type = PPC_OPROFILE_FSL_EMB,
.cpu_setup = __setup_cpu_e500mc,
.machine_check = machine_check_e500,
.machine_check = machine_check_e500mc,
.platform = "ppce500mc",
},
{ /* default match */
......
arch/powerpc/kernel/crash.c
浏览文件 @ aef4b9aa
......@@ -163,6 +163,7 @@ static void crash_kexec_prepare_cpus(int cpu)
}
/* wait for all the CPUs to hit real mode but timeout if they don't come in */
#ifdef CONFIG_PPC_STD_MMU_64
static void crash_kexec_wait_realmode(int cpu)
{
unsigned int msecs;
......@@ -187,6 +188,7 @@ static void crash_kexec_wait_realmode(int cpu)
}
mb();
}
#endif
/*
* This function will be called by secondary cpus or by kexec cpu
......@@ -445,7 +447,9 @@ void default_machine_crash_shutdown(struct pt_regs *regs)
crash_kexec_prepare_cpus(crashing_cpu);
cpu_set(crashing_cpu, cpus_in_crash);
crash_kexec_stop_spus();
#ifdef CONFIG_PPC_STD_MMU_64
crash_kexec_wait_realmode(crashing_cpu);
#endif
if (ppc_md.kexec_cpu_down)
ppc_md.kexec_cpu_down(1, 0);
}
arch/powerpc/kernel/fsl_booke_entry_mapping.S 0 → 100644
浏览文件 @ aef4b9aa
/* 1. Find the index of the entry we're executing in */
bl invstr /* Find our address */
invstr: mflr r6 /* Make it accessible */
mfmsr r7
rlwinm r4,r7,27,31,31 /* extract MSR[IS] */
mfspr r7, SPRN_PID0
slwi r7,r7,16
or r7,r7,r4
mtspr SPRN_MAS6,r7
tlbsx 0,r6 /* search MSR[IS], SPID=PID0 */
mfspr r7,SPRN_MAS1
andis. r7,r7,MAS1_VALID@h
bne match_TLB
mfspr r7,SPRN_MMUCFG
rlwinm r7,r7,21,28,31 /* extract MMUCFG[NPIDS] */
cmpwi r7,3
bne match_TLB /* skip if NPIDS != 3 */
mfspr r7,SPRN_PID1
slwi r7,r7,16
or r7,r7,r4
mtspr SPRN_MAS6,r7
tlbsx 0,r6 /* search MSR[IS], SPID=PID1 */
mfspr r7,SPRN_MAS1
andis. r7,r7,MAS1_VALID@h
bne match_TLB
mfspr r7, SPRN_PID2
slwi r7,r7,16
or r7,r7,r4
mtspr SPRN_MAS6,r7
tlbsx 0,r6 /* Fall through, we had to match */
match_TLB:
mfspr r7,SPRN_MAS0
rlwinm r3,r7,16,20,31 /* Extract MAS0(Entry) */
mfspr r7,SPRN_MAS1 /* Insure IPROT set */
oris r7,r7,MAS1_IPROT@h
mtspr SPRN_MAS1,r7
tlbwe
/* 2. Invalidate all entries except the entry we're executing in */
mfspr r9,SPRN_TLB1CFG
andi. r9,r9,0xfff
li r6,0 /* Set Entry counter to 0 */
1: lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
rlwimi r7,r6,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r6) */
mtspr SPRN_MAS0,r7
tlbre
mfspr r7,SPRN_MAS1
rlwinm r7,r7,0,2,31 /* Clear MAS1 Valid and IPROT */
cmpw r3,r6
beq skpinv /* Dont update the current execution TLB */
mtspr SPRN_MAS1,r7
tlbwe
isync
skpinv: addi r6,r6,1 /* Increment */
cmpw r6,r9 /* Are we done? */
bne 1b /* If not, repeat */
/* Invalidate TLB0 */
li r6,0x04
tlbivax 0,r6
TLBSYNC
/* Invalidate TLB1 */
li r6,0x0c
tlbivax 0,r6
TLBSYNC
/* 3. Setup a temp mapping and jump to it */
andi. r5, r3, 0x1 /* Find an entry not used and is non-zero */
addi r5, r5, 0x1
lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */
mtspr SPRN_MAS0,r7
tlbre
/* grab and fixup the RPN */
mfspr r6,SPRN_MAS1 /* extract MAS1[SIZE] */
rlwinm r6,r6,25,27,31
li r8,-1
addi r6,r6,10
slw r6,r8,r6 /* convert to mask */
bl 1f /* Find our address */
1: mflr r7
mfspr r8,SPRN_MAS3
#ifdef CONFIG_PHYS_64BIT
mfspr r23,SPRN_MAS7
#endif
and r8,r6,r8
subfic r9,r6,-4096
and r9,r9,r7
or r25,r8,r9
ori r8,r25,(MAS3_SX|MAS3_SW|MAS3_SR)
/* Just modify the entry ID and EPN for the temp mapping */
lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */
mtspr SPRN_MAS0,r7
xori r6,r4,1 /* Setup TMP mapping in the other Address space */
slwi r6,r6,12
oris r6,r6,(MAS1_VALID|MAS1_IPROT)@h
ori r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_4K))@l
mtspr SPRN_MAS1,r6
mfspr r6,SPRN_MAS2
li r7,0 /* temp EPN = 0 */
rlwimi r7,r6,0,20,31
mtspr SPRN_MAS2,r7
mtspr SPRN_MAS3,r8
tlbwe
xori r6,r4,1
slwi r6,r6,5 /* setup new context with other address space */
bl 1f /* Find our address */
1: mflr r9
rlwimi r7,r9,0,20,31
addi r7,r7,(2f - 1b)
mtspr SPRN_SRR0,r7
mtspr SPRN_SRR1,r6
rfi
2:
/* 4. Clear out PIDs & Search info */
li r6,0
mtspr SPRN_MAS6,r6
mtspr SPRN_PID0,r6
mfspr r7,SPRN_MMUCFG
rlwinm r7,r7,21,28,31 /* extract MMUCFG[NPIDS] */
cmpwi r7,3
bne 2f /* skip if NPIDS != 3 */
mtspr SPRN_PID1,r6
mtspr SPRN_PID2,r6
/* 5. Invalidate mapping we started in */
2:
lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */
mtspr SPRN_MAS0,r7
tlbre
mfspr r6,SPRN_MAS1
rlwinm r6,r6,0,2,0 /* clear IPROT */
mtspr SPRN_MAS1,r6
tlbwe
/* Invalidate TLB1 */
li r9,0x0c
tlbivax 0,r9
TLBSYNC
/* The mapping only needs to be cache-coherent on SMP */
#ifdef CONFIG_SMP
#define M_IF_SMP MAS2_M
#else
#define M_IF_SMP 0
#endif
#if defined(ENTRY_MAPPING_BOOT_SETUP)
/* 6. Setup KERNELBASE mapping in TLB1[0] */
lis r6,0x1000 /* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */
mtspr SPRN_MAS0,r6
lis r6,(MAS1_VALID|MAS1_IPROT)@h
ori r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_64M))@l
mtspr SPRN_MAS1,r6
lis r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@h
ori r6,r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@l
mtspr SPRN_MAS2,r6
mtspr SPRN_MAS3,r8
tlbwe
/* 7. Jump to KERNELBASE mapping */
lis r6,(KERNELBASE & ~0xfff)@h
ori r6,r6,(KERNELBASE & ~0xfff)@l
#elif defined(ENTRY_MAPPING_KEXEC_SETUP)
/*
* 6. Setup a 1:1 mapping in TLB1. Esel 0 is unsued, 1 or 2 contains the tmp
* mapping so we start at 3. We setup 8 mappings, each 256MiB in size. This
* will cover the first 2GiB of memory.
*/
lis r10, (MAS1_VALID|MAS1_IPROT)@h
ori r10,r10, (MAS1_TSIZE(BOOK3E_PAGESZ_256M))@l
li r11, 0
li r0, 8
mtctr r0
next_tlb_setup:
addi r0, r11, 3
rlwinm r0, r0, 16, 4, 15 // Compute esel
rlwinm r9, r11, 28, 0, 3 // Compute [ER]PN
oris r0, r0, (MAS0_TLBSEL(1))@h
mtspr SPRN_MAS0,r0
mtspr SPRN_MAS1,r10
mtspr SPRN_MAS2,r9
ori r9, r9, (MAS3_SX|MAS3_SW|MAS3_SR)
mtspr SPRN_MAS3,r9
tlbwe
addi r11, r11, 1
bdnz+ next_tlb_setup
/* 7. Jump to our 1:1 mapping */
li r6, 0
#else
#error You need to specify the mapping or not use this at all.
#endif
lis r7,MSR_KERNEL@h
ori r7,r7,MSR_KERNEL@l
bl 1f /* Find our address */
1: mflr r9
rlwimi r6,r9,0,20,31
addi r6,r6,(2f - 1b)
add r6, r6, r25
mtspr SPRN_SRR0,r6
mtspr SPRN_SRR1,r7
rfi /* start execution out of TLB1[0] entry */
/* 8. Clear out the temp mapping */
2: lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */
mtspr SPRN_MAS0,r7
tlbre
mfspr r8,SPRN_MAS1
rlwinm r8,r8,0,2,0 /* clear IPROT */
mtspr SPRN_MAS1,r8
tlbwe
/* Invalidate TLB1 */
li r9,0x0c
tlbivax 0,r9
TLBSYNC
arch/powerpc/kernel/head_fsl_booke.S
浏览文件 @ aef4b9aa
......@@ -94,204 +94,10 @@ _ENTRY(_start);
*/
_ENTRY(__early_start)
/* 1. Find the index of the entry we're executing in */
bl invstr /* Find our address */
invstr: mflr r6 /* Make it accessible */
mfmsr r7
rlwinm r4,r7,27,31,31 /* extract MSR[IS] */
mfspr r7, SPRN_PID0
slwi r7,r7,16
or r7,r7,r4
mtspr SPRN_MAS6,r7
tlbsx 0,r6 /* search MSR[IS], SPID=PID0 */
mfspr r7,SPRN_MAS1
andis. r7,r7,MAS1_VALID@h
bne match_TLB
mfspr r7,SPRN_MMUCFG
rlwinm r7,r7,21,28,31 /* extract MMUCFG[NPIDS] */
cmpwi r7,3
bne match_TLB /* skip if NPIDS != 3 */
mfspr r7,SPRN_PID1
slwi r7,r7,16
or r7,r7,r4
mtspr SPRN_MAS6,r7
tlbsx 0,r6 /* search MSR[IS], SPID=PID1 */
mfspr r7,SPRN_MAS1
andis. r7,r7,MAS1_VALID@h
bne match_TLB
mfspr r7, SPRN_PID2
slwi r7,r7,16
or r7,r7,r4
mtspr SPRN_MAS6,r7
tlbsx 0,r6 /* Fall through, we had to match */
match_TLB:
mfspr r7,SPRN_MAS0
rlwinm r3,r7,16,20,31 /* Extract MAS0(Entry) */
mfspr r7,SPRN_MAS1 /* Insure IPROT set */
oris r7,r7,MAS1_IPROT@h
mtspr SPRN_MAS1,r7
tlbwe
/* 2. Invalidate all entries except the entry we're executing in */
mfspr r9,SPRN_TLB1CFG
andi. r9,r9,0xfff
li r6,0 /* Set Entry counter to 0 */
1: lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
rlwimi r7,r6,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r6) */
mtspr SPRN_MAS0,r7
tlbre
mfspr r7,SPRN_MAS1
rlwinm r7,r7,0,2,31 /* Clear MAS1 Valid and IPROT */
cmpw r3,r6
beq skpinv /* Dont update the current execution TLB */
mtspr SPRN_MAS1,r7
tlbwe
isync
skpinv: addi r6,r6,1 /* Increment */
cmpw r6,r9 /* Are we done? */
bne 1b /* If not, repeat */
/* Invalidate TLB0 */
li r6,0x04
tlbivax 0,r6
TLBSYNC
/* Invalidate TLB1 */
li r6,0x0c
tlbivax 0,r6
TLBSYNC
/* 3. Setup a temp mapping and jump to it */
andi. r5, r3, 0x1 /* Find an entry not used and is non-zero */
addi r5, r5, 0x1
lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */
mtspr SPRN_MAS0,r7
tlbre
/* grab and fixup the RPN */
mfspr r6,SPRN_MAS1 /* extract MAS1[SIZE] */
rlwinm r6,r6,25,27,31
li r8,-1
addi r6,r6,10
slw r6,r8,r6 /* convert to mask */
bl 1f /* Find our address */
1: mflr r7
mfspr r8,SPRN_MAS3
#ifdef CONFIG_PHYS_64BIT
mfspr r23,SPRN_MAS7
#endif
and r8,r6,r8
subfic r9,r6,-4096
and r9,r9,r7
or r25,r8,r9
ori r8,r25,(MAS3_SX|MAS3_SW|MAS3_SR)
/* Just modify the entry ID and EPN for the temp mapping */
lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */
mtspr SPRN_MAS0,r7
xori r6,r4,1 /* Setup TMP mapping in the other Address space */
slwi r6,r6,12
oris r6,r6,(MAS1_VALID|MAS1_IPROT)@h
ori r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_4K))@l
mtspr SPRN_MAS1,r6
mfspr r6,SPRN_MAS2
li r7,0 /* temp EPN = 0 */
rlwimi r7,r6,0,20,31
mtspr SPRN_MAS2,r7
mtspr SPRN_MAS3,r8
tlbwe
xori r6,r4,1
slwi r6,r6,5 /* setup new context with other address space */
bl 1f /* Find our address */
1: mflr r9
rlwimi r7,r9,0,20,31
addi r7,r7,(2f - 1b)
mtspr SPRN_SRR0,r7
mtspr SPRN_SRR1,r6
rfi
2:
/* 4. Clear out PIDs & Search info */
li r6,0
mtspr SPRN_MAS6,r6
mtspr SPRN_PID0,r6
mfspr r7,SPRN_MMUCFG
rlwinm r7,r7,21,28,31 /* extract MMUCFG[NPIDS] */
cmpwi r7,3
bne 2f /* skip if NPIDS != 3 */
mtspr SPRN_PID1,r6
mtspr SPRN_PID2,r6
/* 5. Invalidate mapping we started in */
2:
lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */
mtspr SPRN_MAS0,r7
tlbre
mfspr r6,SPRN_MAS1
rlwinm r6,r6,0,2,0 /* clear IPROT */
mtspr SPRN_MAS1,r6
tlbwe
/* Invalidate TLB1 */
li r9,0x0c
tlbivax 0,r9
TLBSYNC
/* The mapping only needs to be cache-coherent on SMP */
#ifdef CONFIG_SMP
#define M_IF_SMP MAS2_M
#else
#define M_IF_SMP 0
#endif
/* 6. Setup KERNELBASE mapping in TLB1[0] */
lis r6,0x1000 /* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */
mtspr SPRN_MAS0,r6
lis r6,(MAS1_VALID|MAS1_IPROT)@h
ori r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_64M))@l
mtspr SPRN_MAS1,r6
lis r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@h
ori r6,r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@l
mtspr SPRN_MAS2,r6
mtspr SPRN_MAS3,r8
tlbwe
/* 7. Jump to KERNELBASE mapping */
lis r6,(KERNELBASE & ~0xfff)@h
ori r6,r6,(KERNELBASE & ~0xfff)@l
lis r7,MSR_KERNEL@h
ori r7,r7,MSR_KERNEL@l
bl 1f /* Find our address */
1: mflr r9
rlwimi r6,r9,0,20,31
addi r6,r6,(2f - 1b)
mtspr SPRN_SRR0,r6
mtspr SPRN_SRR1,r7
rfi /* start execution out of TLB1[0] entry */
/* 8. Clear out the temp mapping */
2: lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */
mtspr SPRN_MAS0,r7
tlbre
mfspr r8,SPRN_MAS1
rlwinm r8,r8,0,2,0 /* clear IPROT */
mtspr SPRN_MAS1,r8
tlbwe
/* Invalidate TLB1 */
li r9,0x0c
tlbivax 0,r9
TLBSYNC
#define ENTRY_MAPPING_BOOT_SETUP
#include "fsl_booke_entry_mapping.S"
#undef ENTRY_MAPPING_BOOT_SETUP
/* Establish the interrupt vector offsets */
SET_IVOR(0, CriticalInput);
......
arch/powerpc/kernel/misc_32.S
浏览文件 @ aef4b9aa
......@@ -711,6 +711,22 @@ relocate_new_kernel:
/* r4 = reboot_code_buffer */
/* r5 = start_address */
#ifdef CONFIG_FSL_BOOKE
mr r29, r3
mr r30, r4
mr r31, r5
#define ENTRY_MAPPING_KEXEC_SETUP
#include "fsl_booke_entry_mapping.S"
#undef ENTRY_MAPPING_KEXEC_SETUP
mr r3, r29
mr r4, r30
mr r5, r31
li r0, 0
#else
li r0, 0
/*
......@@ -727,6 +743,7 @@ relocate_new_kernel:
rfi
1:
#endif
/* from this point address translation is turned off */
/* and interrupts are disabled */
......
arch/powerpc/kernel/ppc_ksyms.c
浏览文件 @ aef4b9aa
......@@ -101,7 +101,7 @@ EXPORT_SYMBOL(pci_dram_offset);
EXPORT_SYMBOL(start_thread);
EXPORT_SYMBOL(kernel_thread);
#ifndef CONFIG_BOOKE
#ifdef CONFIG_PPC_FPU
EXPORT_SYMBOL_GPL(cvt_df);
EXPORT_SYMBOL_GPL(cvt_fd);
#endif
......
arch/powerpc/kernel/swsusp_booke.S 0 → 100644
浏览文件 @ aef4b9aa
/*
* Based on swsusp_32.S, modified for FSL BookE by
* Anton Vorontsov <avorontsov@ru.mvista.com>
* Copyright (c) 2009-2010 MontaVista Software, LLC.
*/
#include <linux/threads.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/cputable.h>
#include <asm/thread_info.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#include <asm/mmu.h>
/*
* Structure for storing CPU registers on the save area.
*/
#define SL_SP 0
#define SL_PC 4
#define SL_MSR 8
#define SL_TCR 0xc
#define SL_SPRG0 0x10
#define SL_SPRG1 0x14
#define SL_SPRG2 0x18
#define SL_SPRG3 0x1c
#define SL_SPRG4 0x20
#define SL_SPRG5 0x24
#define SL_SPRG6 0x28
#define SL_SPRG7 0x2c
#define SL_TBU 0x30
#define SL_TBL 0x34
#define SL_R2 0x38
#define SL_CR 0x3c
#define SL_LR 0x40
#define SL_R12 0x44 /* r12 to r31 */
#define SL_SIZE (SL_R12 + 80)
.section .data
.align 5
_GLOBAL(swsusp_save_area)
.space SL_SIZE
.section .text
.align 5
_GLOBAL(swsusp_arch_suspend)
lis r11,swsusp_save_area@h
ori r11,r11,swsusp_save_area@l
mflr r0
stw r0,SL_LR(r11)
mfcr r0
stw r0,SL_CR(r11)
stw r1,SL_SP(r11)
stw r2,SL_R2(r11)
stmw r12,SL_R12(r11)
/* Save MSR & TCR */
mfmsr r4
stw r4,SL_MSR(r11)
mfspr r4,SPRN_TCR
stw r4,SL_TCR(r11)
/* Get a stable timebase and save it */
1: mfspr r4,SPRN_TBRU
stw r4,SL_TBU(r11)
mfspr r5,SPRN_TBRL
stw r5,SL_TBL(r11)
mfspr r3,SPRN_TBRU
cmpw r3,r4
bne 1b
/* Save SPRGs */
mfsprg r4,0
stw r4,SL_SPRG0(r11)
mfsprg r4,1
stw r4,SL_SPRG1(r11)
mfsprg r4,2
stw r4,SL_SPRG2(r11)
mfsprg r4,3
stw r4,SL_SPRG3(r11)
mfsprg r4,4
stw r4,SL_SPRG4(r11)
mfsprg r4,5
stw r4,SL_SPRG5(r11)
mfsprg r4,6
stw r4,SL_SPRG6(r11)
mfsprg r4,7
stw r4,SL_SPRG7(r11)
/* Call the low level suspend stuff (we should probably have made
* a stackframe...
*/
bl swsusp_save
/* Restore LR from the save area */
lis r11,swsusp_save_area@h
ori r11,r11,swsusp_save_area@l
lwz r0,SL_LR(r11)
mtlr r0
blr
_GLOBAL(swsusp_arch_resume)
sync
/* Load ptr the list of pages to copy in r3 */
lis r11,(restore_pblist)@h
ori r11,r11,restore_pblist@l
lwz r3,0(r11)
/* Copy the pages. This is a very basic implementation, to
* be replaced by something more cache efficient */
1:
li r0,256
mtctr r0
lwz r5,pbe_address(r3) /* source */
lwz r6,pbe_orig_address(r3) /* destination */
2:
lwz r8,0(r5)
lwz r9,4(r5)
lwz r10,8(r5)
lwz r11,12(r5)
addi r5,r5,16
stw r8,0(r6)
stw r9,4(r6)
stw r10,8(r6)
stw r11,12(r6)
addi r6,r6,16
bdnz 2b
lwz r3,pbe_next(r3)
cmpwi 0,r3,0
bne 1b
bl flush_dcache_L1
bl flush_instruction_cache
lis r11,swsusp_save_area@h
ori r11,r11,swsusp_save_area@l
lwz r4,SL_SPRG0(r11)
mtsprg 0,r4
lwz r4,SL_SPRG1(r11)
mtsprg 1,r4
lwz r4,SL_SPRG2(r11)
mtsprg 2,r4
lwz r4,SL_SPRG3(r11)
mtsprg 3,r4
lwz r4,SL_SPRG4(r11)
mtsprg 4,r4
lwz r4,SL_SPRG5(r11)
mtsprg 5,r4
lwz r4,SL_SPRG6(r11)
mtsprg 6,r4
lwz r4,SL_SPRG7(r11)
mtsprg 7,r4
/* restore the MSR */
lwz r3,SL_MSR(r11)
mtmsr r3
/* Restore TB */
li r3,0
mtspr SPRN_TBWL,r3
lwz r3,SL_TBU(r11)
lwz r4,SL_TBL(r11)
mtspr SPRN_TBWU,r3
mtspr SPRN_TBWL,r4
/* Restore TCR and clear any pending bits in TSR. */
lwz r4,SL_TCR(r11)
mtspr SPRN_TCR,r4
lis r4, (TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS)@h
mtspr SPRN_TSR,r4
/* Kick decrementer */
li r0,1
mtdec r0
/* Restore the callee-saved registers and return */
lwz r0,SL_CR(r11)
mtcr r0
lwz r2,SL_R2(r11)
lmw r12,SL_R12(r11)
lwz r1,SL_SP(r11)
lwz r0,SL_LR(r11)
mtlr r0
li r3,0
blr
arch/powerpc/kernel/traps.c
浏览文件 @ aef4b9aa
/*
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
* Copyright 2007-2010 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
......@@ -305,7 +306,7 @@ static inline int check_io_access(struct pt_regs *regs)
#ifndef CONFIG_FSL_BOOKE
#define get_mc_reason(regs) ((regs)->dsisr)
#else
#define get_mc_reason(regs) (mfspr(SPRN_MCSR) & MCSR_MASK)
#define get_mc_reason(regs) (mfspr(SPRN_MCSR))
#endif
#define REASON_FP ESR_FP
#define REASON_ILLEGAL (ESR_PIL | ESR_PUO)
......@@ -421,6 +422,91 @@ int machine_check_47x(struct pt_regs *regs)
return 0;
}
#elif defined(CONFIG_E500)
int machine_check_e500mc(struct pt_regs *regs)
{
unsigned long mcsr = mfspr(SPRN_MCSR);
unsigned long reason = mcsr;
int recoverable = 1;
printk("Machine check in kernel mode.\n");
printk("Caused by (from MCSR=%lx): ", reason);
if (reason & MCSR_MCP)
printk("Machine Check Signal\n");
if (reason & MCSR_ICPERR) {
printk("Instruction Cache Parity Error\n");
/*
* This is recoverable by invalidating the i-cache.
*/
mtspr(SPRN_L1CSR1, mfspr(SPRN_L1CSR1) | L1CSR1_ICFI);
while (mfspr(SPRN_L1CSR1) & L1CSR1_ICFI)
;
/*
* This will generally be accompanied by an instruction
* fetch error report -- only treat MCSR_IF as fatal
* if it wasn't due to an L1 parity error.
*/
reason &= ~MCSR_IF;
}
if (reason & MCSR_DCPERR_MC) {
printk("Data Cache Parity Error\n");
recoverable = 0;
}
if (reason & MCSR_L2MMU_MHIT) {
printk("Hit on multiple TLB entries\n");
recoverable = 0;
}
if (reason & MCSR_NMI)
printk("Non-maskable interrupt\n");
if (reason & MCSR_IF) {
printk("Instruction Fetch Error Report\n");
recoverable = 0;
}
if (reason & MCSR_LD) {
printk("Load Error Report\n");
recoverable = 0;
}
if (reason & MCSR_ST) {
printk("Store Error Report\n");
recoverable = 0;
}
if (reason & MCSR_LDG) {
printk("Guarded Load Error Report\n");
recoverable = 0;
}
if (reason & MCSR_TLBSYNC)
printk("Simultaneous tlbsync operations\n");
if (reason & MCSR_BSL2_ERR) {
printk("Level 2 Cache Error\n");
recoverable = 0;
}
if (reason & MCSR_MAV) {
u64 addr;
addr = mfspr(SPRN_MCAR);
addr |= (u64)mfspr(SPRN_MCARU) << 32;
printk("Machine Check %s Address: %#llx\n",
reason & MCSR_MEA ? "Effective" : "Physical", addr);
}
mtspr(SPRN_MCSR, mcsr);
return mfspr(SPRN_MCSR) == 0 && recoverable;
}
int machine_check_e500(struct pt_regs *regs)
{
unsigned long reason = get_mc_reason(regs);
......
arch/powerpc/platforms/44x/Kconfig
浏览文件 @ aef4b9aa
......@@ -171,6 +171,17 @@ config ISS4xx
help
This option enables support for the IBM ISS simulation environment
config ICON
bool "Icon"
depends on 44x
default n
select PPC44x_SIMPLE
select 440SPe
select PCI
select PPC4xx_PCI_EXPRESS
help
This option enables support for the AMCC PPC440SPe evaluation board.
#config LUAN
# bool "Luan"
# depends on 44x
......
arch/powerpc/platforms/44x/ppc44x_simple.c
浏览文件 @ aef4b9aa
......@@ -61,7 +61,8 @@ static char *board[] __initdata = {
"amcc,redwood",
"amcc,sequoia",
"amcc,taishan",
"amcc,yosemite"
"amcc,yosemite",
"mosaixtech,icon"
};
static int __init ppc44x_probe(void)
......
arch/powerpc/platforms/85xx/mpc85xx_mds.c
浏览文件 @ aef4b9aa
/*
* Copyright (C) Freescale Semicondutor, Inc. 2006-2007. All rights reserved.
* Copyright (C) Freescale Semicondutor, Inc. 2006-2010. All rights reserved.
*
* Author: Andy Fleming <afleming@freescale.com>
*
......@@ -154,6 +154,10 @@ static int mpc8568_mds_phy_fixups(struct phy_device *phydev)
* Setup the architecture
*
*/
#ifdef CONFIG_SMP
extern void __init mpc85xx_smp_init(void);
#endif
static void __init mpc85xx_mds_setup_arch(void)
{
struct device_node *np;
......@@ -194,6 +198,10 @@ static void __init mpc85xx_mds_setup_arch(void)
}
#endif
#ifdef CONFIG_SMP
mpc85xx_smp_init();
#endif
#ifdef CONFIG_QUICC_ENGINE
np = of_find_compatible_node(NULL, NULL, "fsl,qe");
if (!np) {
......@@ -271,9 +279,49 @@ static void __init mpc85xx_mds_setup_arch(void)
BCSR_UCC_RGMII, BCSR_UCC_RTBI);
}
} else if (machine_is(p1021_mds)) {
#define BCSR11_ENET_MICRST (0x1 << 5)
/* Reset Micrel PHY */
clrbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
setbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
}
iounmap(bcsr_regs);
}
if (machine_is(p1021_mds)) {
#define MPC85xx_PMUXCR_OFFSET 0x60
#define MPC85xx_PMUXCR_QE0 0x00008000
#define MPC85xx_PMUXCR_QE3 0x00001000
#define MPC85xx_PMUXCR_QE9 0x00000040
#define MPC85xx_PMUXCR_QE12 0x00000008
static __be32 __iomem *pmuxcr;
np = of_find_node_by_name(NULL, "global-utilities");
if (np) {
pmuxcr = of_iomap(np, 0) + MPC85xx_PMUXCR_OFFSET;
if (!pmuxcr)
printk(KERN_EMERG "Error: Alternate function"
" signal multiplex control register not"
" mapped!\n");
else
/* P1021 has pins muxed for QE and other functions. To
* enable QE UEC mode, we need to set bit QE0 for UCC1
* in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9
* and QE12 for QE MII management singals in PMUXCR
* register.
*/
setbits32(pmuxcr, MPC85xx_PMUXCR_QE0 |
MPC85xx_PMUXCR_QE3 |
MPC85xx_PMUXCR_QE9 |
MPC85xx_PMUXCR_QE12);
of_node_put(np);
}
}
#endif /* CONFIG_QUICC_ENGINE */
#ifdef CONFIG_SWIOTLB
......@@ -330,6 +378,16 @@ static struct of_device_id mpc85xx_ids[] = {
{},
};
static struct of_device_id p1021_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
{ .compatible = "simple-bus", },
{ .type = "qe", },
{ .compatible = "fsl,qe", },
{ .compatible = "gianfar", },
{},
};
static int __init mpc85xx_publish_devices(void)
{
if (machine_is(mpc8568_mds))
......@@ -342,11 +400,22 @@ static int __init mpc85xx_publish_devices(void)
return 0;
}
static int __init p1021_publish_devices(void)
{
/* Publish the QE devices */
of_platform_bus_probe(NULL, p1021_ids, NULL);
return 0;
}
machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices);
machine_device_initcall(mpc8569_mds, mpc85xx_publish_devices);
machine_device_initcall(p1021_mds, p1021_publish_devices);
machine_arch_initcall(mpc8568_mds, swiotlb_setup_bus_notifier);
machine_arch_initcall(mpc8569_mds, swiotlb_setup_bus_notifier);
machine_arch_initcall(p1021_mds, swiotlb_setup_bus_notifier);
static void __init mpc85xx_mds_pic_init(void)
{
......@@ -366,7 +435,7 @@ static void __init mpc85xx_mds_pic_init(void)
mpic = mpic_alloc(np, r.start,
MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
MPIC_BROKEN_FRR_NIRQS,
MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
of_node_put(np);
......@@ -380,7 +449,11 @@ static void __init mpc85xx_mds_pic_init(void)
if (!np)
return;
}
qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
if (machine_is(p1021_mds))
qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
qe_ic_cascade_high_mpic);
else
qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
of_node_put(np);
#endif /* CONFIG_QUICC_ENGINE */
}
......@@ -426,3 +499,26 @@ define_machine(mpc8569_mds) {
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
#endif
};
static int __init p1021_mds_probe(void)
{
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "fsl,P1021MDS");
}
define_machine(p1021_mds) {
.name = "P1021 MDS",
.probe = p1021_mds_probe,
.setup_arch = mpc85xx_mds_setup_arch,
.init_IRQ = mpc85xx_mds_pic_init,
.get_irq = mpic_get_irq,
.restart = fsl_rstcr_restart,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
#ifdef CONFIG_PCI
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
#endif
};
arch/powerpc/sysdev/fsl_msi.c
浏览文件 @ aef4b9aa
/*
* Copyright (C) 2007-2008 Freescale Semiconductor, Inc. All rights reserved.
* Copyright (C) 2007-2010 Freescale Semiconductor, Inc.
*
* Author: Tony Li <tony.li@freescale.com>
* Jason Jin <Jason.jin@freescale.com>
......@@ -22,14 +22,20 @@
#include <asm/prom.h>
#include <asm/hw_irq.h>
#include <asm/ppc-pci.h>
#include <asm/mpic.h>
#include "fsl_msi.h"
LIST_HEAD(msi_head);
struct fsl_msi_feature {
u32 fsl_pic_ip;
u32 msiir_offset;
};
static struct fsl_msi *fsl_msi;
struct fsl_msi_cascade_data {
struct fsl_msi *msi_data;
int index;
};
static inline u32 fsl_msi_read(u32 __iomem *base, unsigned int reg)
{
......@@ -54,10 +60,12 @@ static struct irq_chip fsl_msi_chip = {
static int fsl_msi_host_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{
struct fsl_msi *msi_data = h->host_data;
struct irq_chip *chip = &fsl_msi_chip;
irq_to_desc(virq)->status |= IRQ_TYPE_EDGE_FALLING;
set_irq_chip_data(virq, msi_data);
set_irq_chip_and_handler(virq, chip, handle_edge_irq);
return 0;
......@@ -96,11 +104,12 @@ static int fsl_msi_check_device(struct pci_dev *pdev, int nvec, int type)
static void fsl_teardown_msi_irqs(struct pci_dev *pdev)
{
struct msi_desc *entry;
struct fsl_msi *msi_data = fsl_msi;
struct fsl_msi *msi_data;
list_for_each_entry(entry, &pdev->msi_list, list) {
if (entry->irq == NO_IRQ)
continue;
msi_data = get_irq_data(entry->irq);
set_irq_msi(entry->irq, NULL);
msi_bitmap_free_hwirqs(&msi_data->bitmap,
virq_to_hw(entry->irq), 1);
......@@ -111,9 +120,10 @@ static void fsl_teardown_msi_irqs(struct pci_dev *pdev)
}
static void fsl_compose_msi_msg(struct pci_dev *pdev, int hwirq,
struct msi_msg *msg)
struct msi_msg *msg,
struct fsl_msi *fsl_msi_data)
{
struct fsl_msi *msi_data = fsl_msi;
struct fsl_msi *msi_data = fsl_msi_data;
struct pci_controller *hose = pci_bus_to_host(pdev->bus);
u32 base = 0;
......@@ -130,14 +140,19 @@ static void fsl_compose_msi_msg(struct pci_dev *pdev, int hwirq,
static int fsl_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
{
int rc, hwirq;
int rc, hwirq = -ENOMEM;
unsigned int virq;
struct msi_desc *entry;
struct msi_msg msg;
struct fsl_msi *msi_data = fsl_msi;
struct fsl_msi *msi_data;
list_for_each_entry(entry, &pdev->msi_list, list) {
hwirq = msi_bitmap_alloc_hwirqs(&msi_data->bitmap, 1);
list_for_each_entry(msi_data, &msi_head, list) {
hwirq = msi_bitmap_alloc_hwirqs(&msi_data->bitmap, 1);
if (hwirq >= 0)
break;
}
if (hwirq < 0) {
rc = hwirq;
pr_debug("%s: fail allocating msi interrupt\n",
......@@ -154,25 +169,31 @@ static int fsl_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
rc = -ENOSPC;
goto out_free;
}
set_irq_data(virq, msi_data);
set_irq_msi(virq, entry);
fsl_compose_msi_msg(pdev, hwirq, &msg);
fsl_compose_msi_msg(pdev, hwirq, &msg, msi_data);
write_msi_msg(virq, &msg);
}
return 0;
out_free:
/* free by the caller of this function */
return rc;
}
static void fsl_msi_cascade(unsigned int irq, struct irq_desc *desc)
{
unsigned int cascade_irq;
struct fsl_msi *msi_data = fsl_msi;
struct fsl_msi *msi_data;
int msir_index = -1;
u32 msir_value = 0;
u32 intr_index;
u32 have_shift = 0;
struct fsl_msi_cascade_data *cascade_data;
cascade_data = (struct fsl_msi_cascade_data *)get_irq_data(irq);
msi_data = cascade_data->msi_data;
raw_spin_lock(&desc->lock);
if ((msi_data->feature & FSL_PIC_IP_MASK) == FSL_PIC_IP_IPIC) {
......@@ -187,13 +208,13 @@ static void fsl_msi_cascade(unsigned int irq, struct irq_desc *desc)
if (unlikely(desc->status & IRQ_INPROGRESS))
goto unlock;
msir_index = (int)desc->handler_data;
msir_index = cascade_data->index;
if (msir_index >= NR_MSI_REG)
cascade_irq = NO_IRQ;
desc->status |= IRQ_INPROGRESS;
switch (fsl_msi->feature & FSL_PIC_IP_MASK) {
switch (msi_data->feature & FSL_PIC_IP_MASK) {
case FSL_PIC_IP_MPIC:
msir_value = fsl_msi_read(msi_data->msi_regs,
msir_index * 0x10);
......@@ -229,6 +250,30 @@ static void fsl_msi_cascade(unsigned int irq, struct irq_desc *desc)
raw_spin_unlock(&desc->lock);
}
static int fsl_of_msi_remove(struct of_device *ofdev)
{
struct fsl_msi *msi = ofdev->dev.platform_data;
int virq, i;
struct fsl_msi_cascade_data *cascade_data;
if (msi->list.prev != NULL)
list_del(&msi->list);
for (i = 0; i < NR_MSI_REG; i++) {
virq = msi->msi_virqs[i];
if (virq != NO_IRQ) {
cascade_data = get_irq_data(virq);
kfree(cascade_data);
irq_dispose_mapping(virq);
}
}
if (msi->bitmap.bitmap)
msi_bitmap_free(&msi->bitmap);
iounmap(msi->msi_regs);
kfree(msi);
return 0;
}
static int __devinit fsl_of_msi_probe(struct of_device *dev,
const struct of_device_id *match)
{
......@@ -239,15 +284,18 @@ static int __devinit fsl_of_msi_probe(struct of_device *dev,
int virt_msir;
const u32 *p;
struct fsl_msi_feature *features = match->data;
struct fsl_msi_cascade_data *cascade_data = NULL;
int len;
u32 offset;
printk(KERN_DEBUG "Setting up Freescale MSI support\n");
msi = kzalloc(sizeof(struct fsl_msi), GFP_KERNEL);
if (!msi) {
dev_err(&dev->dev, "No memory for MSI structure\n");
err = -ENOMEM;
goto error_out;
return -ENOMEM;
}
dev->dev.platform_data = msi;
msi->irqhost = irq_alloc_host(dev->dev.of_node, IRQ_HOST_MAP_LINEAR,
NR_MSI_IRQS, &fsl_msi_host_ops, 0);
......@@ -298,27 +346,47 @@ static int __devinit fsl_of_msi_probe(struct of_device *dev,
err = -EINVAL;
goto error_out;
}
offset = 0;
p = of_get_property(dev->node, "msi-available-ranges", &len);
if (p)
offset = *p / IRQS_PER_MSI_REG;
count /= sizeof(u32);
for (i = 0; i < count / 2; i++) {
if (i > NR_MSI_REG)
break;
for (i = 0; i < min(count / 2, NR_MSI_REG); i++) {
virt_msir = irq_of_parse_and_map(dev->dev.of_node, i);
if (virt_msir != NO_IRQ) {
set_irq_data(virt_msir, (void *)i);
cascade_data = kzalloc(
sizeof(struct fsl_msi_cascade_data),
GFP_KERNEL);
if (!cascade_data) {
dev_err(&dev->dev,
"No memory for MSI cascade data\n");
err = -ENOMEM;
goto error_out;
}
msi->msi_virqs[i] = virt_msir;
cascade_data->index = i + offset;
cascade_data->msi_data = msi;
set_irq_data(virt_msir, (void *)cascade_data);
set_irq_chained_handler(virt_msir, fsl_msi_cascade);
}
}
fsl_msi = msi;
list_add_tail(&msi->list, &msi_head);
WARN_ON(ppc_md.setup_msi_irqs);
ppc_md.setup_msi_irqs = fsl_setup_msi_irqs;
ppc_md.teardown_msi_irqs = fsl_teardown_msi_irqs;
ppc_md.msi_check_device = fsl_msi_check_device;
/* The multiple setting ppc_md.setup_msi_irqs will not harm things */
if (!ppc_md.setup_msi_irqs) {
ppc_md.setup_msi_irqs = fsl_setup_msi_irqs;
ppc_md.teardown_msi_irqs = fsl_teardown_msi_irqs;
ppc_md.msi_check_device = fsl_msi_check_device;
} else if (ppc_md.setup_msi_irqs != fsl_setup_msi_irqs) {
dev_err(&dev->dev, "Different MSI driver already installed!\n");
err = -ENODEV;
goto error_out;
}
return 0;
error_out:
kfree(msi);
fsl_of_msi_remove(dev);
return err;
}
......@@ -351,6 +419,7 @@ static struct of_platform_driver fsl_of_msi_driver = {
.of_match_table = fsl_of_msi_ids,
},
.probe = fsl_of_msi_probe,
.remove = fsl_of_msi_remove,
};
static __init int fsl_of_msi_init(void)
......
arch/powerpc/sysdev/fsl_msi.h
浏览文件 @ aef4b9aa
......@@ -32,8 +32,11 @@ struct fsl_msi {
u32 msi_addr_hi;
void __iomem *msi_regs;
u32 feature;
int msi_virqs[NR_MSI_REG];
struct msi_bitmap bitmap;
struct list_head list; /* support multiple MSI banks */
};
#endif /* _POWERPC_SYSDEV_FSL_MSI_H */
......
arch/powerpc/sysdev/ppc4xx_pci.c
浏览文件 @ aef4b9aa
......@@ -974,6 +974,123 @@ static struct ppc4xx_pciex_hwops ppc460ex_pcie_hwops __initdata =
.setup_utl = ppc460ex_pciex_init_utl,
};
static int __init ppc460sx_pciex_core_init(struct device_node *np)
{
/* HSS drive amplitude */
mtdcri(SDR0, PESDR0_460SX_HSSL0DAMP, 0xB9843211);
mtdcri(SDR0, PESDR0_460SX_HSSL1DAMP, 0xB9843211);
mtdcri(SDR0, PESDR0_460SX_HSSL2DAMP, 0xB9843211);
mtdcri(SDR0, PESDR0_460SX_HSSL3DAMP, 0xB9843211);
mtdcri(SDR0, PESDR0_460SX_HSSL4DAMP, 0xB9843211);
mtdcri(SDR0, PESDR0_460SX_HSSL5DAMP, 0xB9843211);
mtdcri(SDR0, PESDR0_460SX_HSSL6DAMP, 0xB9843211);
mtdcri(SDR0, PESDR0_460SX_HSSL7DAMP, 0xB9843211);
mtdcri(SDR0, PESDR1_460SX_HSSL0DAMP, 0xB9843211);
mtdcri(SDR0, PESDR1_460SX_HSSL1DAMP, 0xB9843211);
mtdcri(SDR0, PESDR1_460SX_HSSL2DAMP, 0xB9843211);
mtdcri(SDR0, PESDR1_460SX_HSSL3DAMP, 0xB9843211);
mtdcri(SDR0, PESDR2_460SX_HSSL0DAMP, 0xB9843211);
mtdcri(SDR0, PESDR2_460SX_HSSL1DAMP, 0xB9843211);
mtdcri(SDR0, PESDR2_460SX_HSSL2DAMP, 0xB9843211);
mtdcri(SDR0, PESDR2_460SX_HSSL3DAMP, 0xB9843211);
/* HSS TX pre-emphasis */
mtdcri(SDR0, PESDR0_460SX_HSSL0COEFA, 0xDCB98987);
mtdcri(SDR0, PESDR0_460SX_HSSL1COEFA, 0xDCB98987);
mtdcri(SDR0, PESDR0_460SX_HSSL2COEFA, 0xDCB98987);
mtdcri(SDR0, PESDR0_460SX_HSSL3COEFA, 0xDCB98987);
mtdcri(SDR0, PESDR0_460SX_HSSL4COEFA, 0xDCB98987);
mtdcri(SDR0, PESDR0_460SX_HSSL5COEFA, 0xDCB98987);
mtdcri(SDR0, PESDR0_460SX_HSSL6COEFA, 0xDCB98987);
mtdcri(SDR0, PESDR0_460SX_HSSL7COEFA, 0xDCB98987);
mtdcri(SDR0, PESDR1_460SX_HSSL0COEFA, 0xDCB98987);
mtdcri(SDR0, PESDR1_460SX_HSSL1COEFA, 0xDCB98987);
mtdcri(SDR0, PESDR1_460SX_HSSL2COEFA, 0xDCB98987);
mtdcri(SDR0, PESDR1_460SX_HSSL3COEFA, 0xDCB98987);
mtdcri(SDR0, PESDR2_460SX_HSSL0COEFA, 0xDCB98987);
mtdcri(SDR0, PESDR2_460SX_HSSL1COEFA, 0xDCB98987);
mtdcri(SDR0, PESDR2_460SX_HSSL2COEFA, 0xDCB98987);
mtdcri(SDR0, PESDR2_460SX_HSSL3COEFA, 0xDCB98987);
/* HSS TX calibration control */
mtdcri(SDR0, PESDR0_460SX_HSSL1CALDRV, 0x22222222);
mtdcri(SDR0, PESDR1_460SX_HSSL1CALDRV, 0x22220000);
mtdcri(SDR0, PESDR2_460SX_HSSL1CALDRV, 0x22220000);
/* HSS TX slew control */
mtdcri(SDR0, PESDR0_460SX_HSSSLEW, 0xFFFFFFFF);
mtdcri(SDR0, PESDR1_460SX_HSSSLEW, 0xFFFF0000);
mtdcri(SDR0, PESDR2_460SX_HSSSLEW, 0xFFFF0000);
udelay(100);
/* De-assert PLLRESET */
dcri_clrset(SDR0, PESDR0_PLLLCT2, 0x00000100, 0);
/* Reset DL, UTL, GPL before configuration */
mtdcri(SDR0, PESDR0_460SX_RCSSET,
PESDRx_RCSSET_RSTDL | PESDRx_RCSSET_RSTGU);
mtdcri(SDR0, PESDR1_460SX_RCSSET,
PESDRx_RCSSET_RSTDL | PESDRx_RCSSET_RSTGU);
mtdcri(SDR0, PESDR2_460SX_RCSSET,
PESDRx_RCSSET_RSTDL | PESDRx_RCSSET_RSTGU);
udelay(100);
/*
* If bifurcation is not enabled, u-boot would have disabled the
* third PCIe port
*/
if (((mfdcri(SDR0, PESDR1_460SX_HSSCTLSET) & 0x00000001) ==
0x00000001)) {
printk(KERN_INFO "PCI: PCIE bifurcation setup successfully.\n");
printk(KERN_INFO "PCI: Total 3 PCIE ports are present\n");
return 3;
}
printk(KERN_INFO "PCI: Total 2 PCIE ports are present\n");
return 2;
}
static int ppc460sx_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
{
if (port->endpoint)
dcri_clrset(SDR0, port->sdr_base + PESDRn_UTLSET2,
0x01000000, 0);
else
dcri_clrset(SDR0, port->sdr_base + PESDRn_UTLSET2,
0, 0x01000000);
/*Gen-1*/
mtdcri(SDR0, port->sdr_base + PESDRn_460SX_RCEI, 0x08000000);
dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET,
(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL),
PESDRx_RCSSET_RSTPYN);
port->has_ibpre = 1;
return 0;
}
static int ppc460sx_pciex_init_utl(struct ppc4xx_pciex_port *port)
{
/* Max 128 Bytes */
out_be32 (port->utl_base + PEUTL_PBBSZ, 0x00000000);
return 0;
}
static struct ppc4xx_pciex_hwops ppc460sx_pcie_hwops __initdata = {
.core_init = ppc460sx_pciex_core_init,
.port_init_hw = ppc460sx_pciex_init_port_hw,
.setup_utl = ppc460sx_pciex_init_utl,
};
#endif /* CONFIG_44x */
#ifdef CONFIG_40x
......@@ -1089,6 +1206,8 @@ static int __init ppc4xx_pciex_check_core_init(struct device_node *np)
}
if (of_device_is_compatible(np, "ibm,plb-pciex-460ex"))
ppc4xx_pciex_hwops = &ppc460ex_pcie_hwops;
if (of_device_is_compatible(np, "ibm,plb-pciex-460sx"))
ppc4xx_pciex_hwops = &ppc460sx_pcie_hwops;
#endif /* CONFIG_44x */
#ifdef CONFIG_40x
if (of_device_is_compatible(np, "ibm,plb-pciex-405ex"))
......
arch/powerpc/sysdev/ppc4xx_pci.h
浏览文件 @ aef4b9aa
......@@ -323,6 +323,64 @@
#define PESDR0_460EX_IHS1 0x036C
#define PESDR0_460EX_IHS2 0x036D
/*
* 460SX addtional DCRs
*/
#define PESDRn_460SX_RCEI 0x02
#define PESDR0_460SX_HSSL0DAMP 0x320
#define PESDR0_460SX_HSSL1DAMP 0x321
#define PESDR0_460SX_HSSL2DAMP 0x322
#define PESDR0_460SX_HSSL3DAMP 0x323
#define PESDR0_460SX_HSSL4DAMP 0x324
#define PESDR0_460SX_HSSL5DAMP 0x325
#define PESDR0_460SX_HSSL6DAMP 0x326
#define PESDR0_460SX_HSSL7DAMP 0x327
#define PESDR1_460SX_HSSL0DAMP 0x354
#define PESDR1_460SX_HSSL1DAMP 0x355
#define PESDR1_460SX_HSSL2DAMP 0x356
#define PESDR1_460SX_HSSL3DAMP 0x357
#define PESDR2_460SX_HSSL0DAMP 0x384
#define PESDR2_460SX_HSSL1DAMP 0x385
#define PESDR2_460SX_HSSL2DAMP 0x386
#define PESDR2_460SX_HSSL3DAMP 0x387
#define PESDR0_460SX_HSSL0COEFA 0x328
#define PESDR0_460SX_HSSL1COEFA 0x329
#define PESDR0_460SX_HSSL2COEFA 0x32A
#define PESDR0_460SX_HSSL3COEFA 0x32B
#define PESDR0_460SX_HSSL4COEFA 0x32C
#define PESDR0_460SX_HSSL5COEFA 0x32D
#define PESDR0_460SX_HSSL6COEFA 0x32E
#define PESDR0_460SX_HSSL7COEFA 0x32F
#define PESDR1_460SX_HSSL0COEFA 0x358
#define PESDR1_460SX_HSSL1COEFA 0x359
#define PESDR1_460SX_HSSL2COEFA 0x35A
#define PESDR1_460SX_HSSL3COEFA 0x35B
#define PESDR2_460SX_HSSL0COEFA 0x388
#define PESDR2_460SX_HSSL1COEFA 0x389
#define PESDR2_460SX_HSSL2COEFA 0x38A
#define PESDR2_460SX_HSSL3COEFA 0x38B
#define PESDR0_460SX_HSSL1CALDRV 0x339
#define PESDR1_460SX_HSSL1CALDRV 0x361
#define PESDR2_460SX_HSSL1CALDRV 0x391
#define PESDR0_460SX_HSSSLEW 0x338
#define PESDR1_460SX_HSSSLEW 0x360
#define PESDR2_460SX_HSSSLEW 0x390
#define PESDR0_460SX_HSSCTLSET 0x31E
#define PESDR1_460SX_HSSCTLSET 0x352
#define PESDR2_460SX_HSSCTLSET 0x382
#define PESDR0_460SX_RCSSET 0x304
#define PESDR1_460SX_RCSSET 0x344
#define PESDR2_460SX_RCSSET 0x374
/*
* Of the above, some are common offsets from the base
*/
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或