提交 ae72fd58 编写于 作者: W Will Deacon

Merge branches 'perf/event-nos', 'perf/updates' and 'perf/omap4' into for-rmk

#ifndef __ASMARM_CTI_H
#define __ASMARM_CTI_H
#include <asm/io.h>
/* The registers' definition is from section 3.2 of
* Embedded Cross Trigger Revision: r0p0
*/
#define CTICONTROL 0x000
#define CTISTATUS 0x004
#define CTILOCK 0x008
#define CTIPROTECTION 0x00C
#define CTIINTACK 0x010
#define CTIAPPSET 0x014
#define CTIAPPCLEAR 0x018
#define CTIAPPPULSE 0x01c
#define CTIINEN 0x020
#define CTIOUTEN 0x0A0
#define CTITRIGINSTATUS 0x130
#define CTITRIGOUTSTATUS 0x134
#define CTICHINSTATUS 0x138
#define CTICHOUTSTATUS 0x13c
#define CTIPERIPHID0 0xFE0
#define CTIPERIPHID1 0xFE4
#define CTIPERIPHID2 0xFE8
#define CTIPERIPHID3 0xFEC
#define CTIPCELLID0 0xFF0
#define CTIPCELLID1 0xFF4
#define CTIPCELLID2 0xFF8
#define CTIPCELLID3 0xFFC
/* The below are from section 3.6.4 of
* CoreSight v1.0 Architecture Specification
*/
#define LOCKACCESS 0xFB0
#define LOCKSTATUS 0xFB4
/* write this value to LOCKACCESS will unlock the module, and
* other value will lock the module
*/
#define LOCKCODE 0xC5ACCE55
/**
* struct cti - cross trigger interface struct
* @base: mapped virtual address for the cti base
* @irq: irq number for the cti
* @trig_out_for_irq: triger out number which will cause
* the @irq happen
*
* cti struct used to operate cti registers.
*/
struct cti {
void __iomem *base;
int irq;
int trig_out_for_irq;
};
/**
* cti_init - initialize the cti instance
* @cti: cti instance
* @base: mapped virtual address for the cti base
* @irq: irq number for the cti
* @trig_out: triger out number which will cause
* the @irq happen
*
* called by machine code to pass the board dependent
* @base, @irq and @trig_out to cti.
*/
static inline void cti_init(struct cti *cti,
void __iomem *base, int irq, int trig_out)
{
cti->base = base;
cti->irq = irq;
cti->trig_out_for_irq = trig_out;
}
/**
* cti_map_trigger - use the @chan to map @trig_in to @trig_out
* @cti: cti instance
* @trig_in: trigger in number
* @trig_out: trigger out number
* @channel: channel number
*
* This function maps one trigger in of @trig_in to one trigger
* out of @trig_out using the channel @chan.
*/
static inline void cti_map_trigger(struct cti *cti,
int trig_in, int trig_out, int chan)
{
void __iomem *base = cti->base;
unsigned long val;
val = __raw_readl(base + CTIINEN + trig_in * 4);
val |= BIT(chan);
__raw_writel(val, base + CTIINEN + trig_in * 4);
val = __raw_readl(base + CTIOUTEN + trig_out * 4);
val |= BIT(chan);
__raw_writel(val, base + CTIOUTEN + trig_out * 4);
}
/**
* cti_enable - enable the cti module
* @cti: cti instance
*
* enable the cti module
*/
static inline void cti_enable(struct cti *cti)
{
__raw_writel(0x1, cti->base + CTICONTROL);
}
/**
* cti_disable - disable the cti module
* @cti: cti instance
*
* enable the cti module
*/
static inline void cti_disable(struct cti *cti)
{
__raw_writel(0, cti->base + CTICONTROL);
}
/**
* cti_irq_ack - clear the cti irq
* @cti: cti instance
*
* clear the cti irq
*/
static inline void cti_irq_ack(struct cti *cti)
{
void __iomem *base = cti->base;
unsigned long val;
val = __raw_readl(base + CTIINTACK);
val |= BIT(cti->trig_out_for_irq);
__raw_writel(val, base + CTIINTACK);
}
/**
* cti_unlock - unlock cti module
* @cti: cti instance
*
* unlock the cti module, or else any writes to the cti
* module is not allowed.
*/
static inline void cti_unlock(struct cti *cti)
{
void __iomem *base = cti->base;
unsigned long val;
val = __raw_readl(base + LOCKSTATUS);
if (val & 1) {
val = LOCKCODE;
__raw_writel(val, base + LOCKACCESS);
}
}
/**
* cti_lock - lock cti module
* @cti: cti instance
*
* lock the cti module, so any writes to the cti
* module will be not allowed.
*/
static inline void cti_lock(struct cti *cti)
{
void __iomem *base = cti->base;
unsigned long val;
val = __raw_readl(base + LOCKSTATUS);
if (!(val & 1)) {
val = ~LOCKCODE;
__raw_writel(val, base + LOCKACCESS);
}
}
#endif
......@@ -32,7 +32,4 @@ enum arm_perf_pmu_ids {
extern enum arm_perf_pmu_ids
armpmu_get_pmu_id(void);
extern int
armpmu_get_max_events(void);
#endif /* __ARM_PERF_EVENT_H__ */
......@@ -27,13 +27,22 @@ enum arm_pmu_type {
/*
* struct arm_pmu_platdata - ARM PMU platform data
*
* @handle_irq: an optional handler which will be called from the interrupt and
* passed the address of the low level handler, and can be used to implement
* any platform specific handling before or after calling it.
* @handle_irq: an optional handler which will be called from the
* interrupt and passed the address of the low level handler,
* and can be used to implement any platform specific handling
* before or after calling it.
* @enable_irq: an optional handler which will be called after
* request_irq and be used to handle some platform specific
* irq enablement
* @disable_irq: an optional handler which will be called before
* free_irq and be used to handle some platform specific
* irq disablement
*/
struct arm_pmu_platdata {
irqreturn_t (*handle_irq)(int irq, void *dev,
irq_handler_t pmu_handler);
void (*enable_irq)(int irq);
void (*disable_irq)(int irq);
};
#ifdef CONFIG_CPU_HAS_PMU
......
......@@ -59,8 +59,7 @@ armpmu_get_pmu_id(void)
}
EXPORT_SYMBOL_GPL(armpmu_get_pmu_id);
int
armpmu_get_max_events(void)
int perf_num_counters(void)
{
int max_events = 0;
......@@ -69,12 +68,6 @@ armpmu_get_max_events(void)
return max_events;
}
EXPORT_SYMBOL_GPL(armpmu_get_max_events);
int perf_num_counters(void)
{
return armpmu_get_max_events();
}
EXPORT_SYMBOL_GPL(perf_num_counters);
#define HW_OP_UNSUPPORTED 0xFFFF
......@@ -380,6 +373,8 @@ armpmu_release_hardware(struct arm_pmu *armpmu)
{
int i, irq, irqs;
struct platform_device *pmu_device = armpmu->plat_device;
struct arm_pmu_platdata *plat =
dev_get_platdata(&pmu_device->dev);
irqs = min(pmu_device->num_resources, num_possible_cpus());
......@@ -387,9 +382,12 @@ armpmu_release_hardware(struct arm_pmu *armpmu)
if (!cpumask_test_and_clear_cpu(i, &armpmu->active_irqs))
continue;
irq = platform_get_irq(pmu_device, i);
if (irq >= 0)
if (irq >= 0) {
if (plat && plat->disable_irq)
plat->disable_irq(irq);
free_irq(irq, armpmu);
}
}
release_pmu(armpmu->type);
}
......@@ -448,7 +446,8 @@ armpmu_reserve_hardware(struct arm_pmu *armpmu)
irq);
armpmu_release_hardware(armpmu);
return err;
}
} else if (plat && plat->enable_irq)
plat->enable_irq(irq);
cpumask_set_cpu(i, &armpmu->active_irqs);
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册