Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 ae574a5d 编写于 作者: R Russell King 提交者： Russell King
浏览文件
操作

Merge nommu tree

上级 c4713074 c760fc19
显示空白变更内容
内联 并排
Showing with 472 addition and 213 deletion
arch/arm/Kconfig
浏览文件 @ ae574a5d
......@@ -72,6 +72,14 @@ config FIQ
config ARCH_MTD_XIP
bool
config VECTORS_BASE
hex
default 0xffff0000 if MMU
default DRAM_BASE if REMAP_VECTORS_TO_RAM
default 0x00000000
help
The base address of exception vectors.
source "init/Kconfig"
menu "System Type"
......
arch/arm/Kconfig-nommu 0 → 100644
浏览文件 @ ae574a5d
#
# Kconfig for uClinux(non-paged MM) depend configurations
# Hyok S. Choi <hyok.choi@samsung.com>
#
config SET_MEM_PARAM
bool "Set flash/sdram size and base addr"
help
Say Y to manually set the base addresses and sizes.
otherwise, the default values are assigned.
config DRAM_BASE
hex '(S)DRAM Base Address' if SET_MEM_PARAM
default 0x00800000
config DRAM_SIZE
hex '(S)DRAM SIZE' if SET_MEM_PARAM
default 0x00800000
config FLASH_MEM_BASE
hex 'FLASH Base Address' if SET_MEM_PARAM
default 0x00400000
config FLASH_SIZE
hex 'FLASH Size' if SET_MEM_PARAM
default 0x00400000
config REMAP_VECTORS_TO_RAM
bool 'Install vectors to the begining of RAM' if DRAM_BASE
depends on DRAM_BASE
help
The kernel needs to change the hardware exception vectors.
In nommu mode, the hardware exception vectors are normally
placed at address 0x00000000. However, this region may be
occupied by read-only memory depending on H/W design.
If the region contains read-write memory, say 'n' here.
If your CPU provides a remap facility which allows the exception
vectors to be mapped to writable memory, say 'n' here.
Otherwise, say 'y' here. In this case, the kernel will require
external support to redirect the hardware exception vectors to
the writable versions located at DRAM_BASE.
arch/arm/Makefile
浏览文件 @ ae574a5d
......@@ -20,6 +20,11 @@ GZFLAGS :=-9
# Select a platform tht is kept up-to-date
KBUILD_DEFCONFIG := versatile_defconfig
# defines filename extension depending memory manement type.
ifeq ($(CONFIG_MMU),)
MMUEXT := -nommu
endif
ifeq ($(CONFIG_FRAME_POINTER),y)
CFLAGS +=-fno-omit-frame-pointer -mapcs -mno-sched-prolog
endif
......@@ -73,7 +78,7 @@ AFLAGS +=$(CFLAGS_ABI) $(arch-y) $(tune-y) -msoft-float
CHECKFLAGS += -D__arm__
#Default value
head-y := arch/arm/kernel/head.o arch/arm/kernel/init_task.o
head-y := arch/arm/kernel/head$(MMUEXT).o arch/arm/kernel/init_task.o
textofs-y := 0x00008000
machine-$(CONFIG_ARCH_RPC) := rpc
......@@ -133,7 +138,7 @@ else
MACHINE :=
endif
export TEXT_OFFSET GZFLAGS
export TEXT_OFFSET GZFLAGS MMUEXT
# Do we have FASTFPE?
FASTFPE :=arch/arm/fastfpe
......
arch/arm/boot/compressed/head.S
浏览文件 @ ae574a5d
......@@ -2,6 +2,7 @@
* linux/arch/arm/boot/compressed/head.S
*
* Copyright (C) 1996-2002 Russell King
* Copyright (C) 2004 Hyok S. Choi (MPU support)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......@@ -320,6 +321,62 @@ params: ldr r0, =params_phys
cache_on: mov r3, #8 @ cache_on function
b call_cache_fn
/*
* Initialize the highest priority protection region, PR7
* to cover all 32bit address and cacheable and bufferable.
*/
__armv4_mpu_cache_on:
mov r0, #0x3f @ 4G, the whole
mcr p15, 0, r0, c6, c7, 0 @ PR7 Area Setting
mcr p15, 0, r0, c6, c7, 1
mov r0, #0x80 @ PR7
mcr p15, 0, r0, c2, c0, 0 @ D-cache on
mcr p15, 0, r0, c2, c0, 1 @ I-cache on
mcr p15, 0, r0, c3, c0, 0 @ write-buffer on
mov r0, #0xc000
mcr p15, 0, r0, c5, c0, 1 @ I-access permission
mcr p15, 0, r0, c5, c0, 0 @ D-access permission
mov r0, #0
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
mcr p15, 0, r0, c7, c5, 0 @ flush(inval) I-Cache
mcr p15, 0, r0, c7, c6, 0 @ flush(inval) D-Cache
mrc p15, 0, r0, c1, c0, 0 @ read control reg
@ ...I .... ..D. WC.M
orr r0, r0, #0x002d @ .... .... ..1. 11.1
orr r0, r0, #0x1000 @ ...1 .... .... ....
mcr p15, 0, r0, c1, c0, 0 @ write control reg
mov r0, #0
mcr p15, 0, r0, c7, c5, 0 @ flush(inval) I-Cache
mcr p15, 0, r0, c7, c6, 0 @ flush(inval) D-Cache
mov pc, lr
__armv3_mpu_cache_on:
mov r0, #0x3f @ 4G, the whole
mcr p15, 0, r0, c6, c7, 0 @ PR7 Area Setting
mov r0, #0x80 @ PR7
mcr p15, 0, r0, c2, c0, 0 @ cache on
mcr p15, 0, r0, c3, c0, 0 @ write-buffer on
mov r0, #0xc000
mcr p15, 0, r0, c5, c0, 0 @ access permission
mov r0, #0
mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
mrc p15, 0, r0, c1, c0, 0 @ read control reg
@ .... .... .... WC.M
orr r0, r0, #0x000d @ .... .... .... 11.1
mov r0, #0
mcr p15, 0, r0, c1, c0, 0 @ write control reg
mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
mov pc, lr
__setup_mmu: sub r3, r4, #16384 @ Page directory size
bic r3, r3, #0xff @ Align the pointer
bic r3, r3, #0x3f00
......@@ -496,6 +553,18 @@ proc_types:
b __armv4_mmu_cache_off
mov pc, lr
.word 0x41007400 @ ARM74x
.word 0xff00ff00
b __armv3_mpu_cache_on
b __armv3_mpu_cache_off
b __armv3_mpu_cache_flush
.word 0x41009400 @ ARM94x
.word 0xff00ff00
b __armv4_mpu_cache_on
b __armv4_mpu_cache_off
b __armv4_mpu_cache_flush
.word 0x00007000 @ ARM7 IDs
.word 0x0000f000
mov pc, lr
......@@ -562,6 +631,24 @@ proc_types:
cache_off: mov r3, #12 @ cache_off function
b call_cache_fn
__armv4_mpu_cache_off:
mrc p15, 0, r0, c1, c0
bic r0, r0, #0x000d
mcr p15, 0, r0, c1, c0 @ turn MPU and cache off
mov r0, #0
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
mcr p15, 0, r0, c7, c6, 0 @ flush D-Cache
mcr p15, 0, r0, c7, c5, 0 @ flush I-Cache
mov pc, lr
__armv3_mpu_cache_off:
mrc p15, 0, r0, c1, c0
bic r0, r0, #0x000d
mcr p15, 0, r0, c1, c0, 0 @ turn MPU and cache off
mov r0, #0
mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
mov pc, lr
__armv4_mmu_cache_off:
mrc p15, 0, r0, c1, c0
bic r0, r0, #0x000d
......@@ -601,6 +688,24 @@ cache_clean_flush:
mov r3, #16
b call_cache_fn
__armv4_mpu_cache_flush:
mov r2, #1
mov r3, #0
mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
mov r1, #7 << 5 @ 8 segments
1: orr r3, r1, #63 << 26 @ 64 entries
2: mcr p15, 0, r3, c7, c14, 2 @ clean & invalidate D index
subs r3, r3, #1 << 26
bcs 2b @ entries 63 to 0
subs r1, r1, #1 << 5
bcs 1b @ segments 7 to 0
teq r2, #0
mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
__armv6_mmu_cache_flush:
mov r1, #0
mcr p15, 0, r1, c7, c14, 0 @ clean+invalidate D
......@@ -638,6 +743,7 @@ no_cache_id:
mov pc, lr
__armv3_mmu_cache_flush:
__armv3_mpu_cache_flush:
mov r1, #0
mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
mov pc, lr
......
arch/arm/kernel/head-common.S 0 → 100644
浏览文件 @ ae574a5d
/*
* linux/arch/arm/kernel/head-common.S
*
* Copyright (C) 1994-2002 Russell King
* Copyright (c) 2003 ARM Limited
* All Rights Reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
.type __switch_data, %object
__switch_data:
.long __mmap_switched
.long __data_loc @ r4
.long __data_start @ r5
.long __bss_start @ r6
.long _end @ r7
.long processor_id @ r4
.long __machine_arch_type @ r5
.long cr_alignment @ r6
.long init_thread_union + THREAD_START_SP @ sp
/*
* The following fragment of code is executed with the MMU on in MMU mode,
* and uses absolute addresses; this is not position independent.
*
* r0 = cp#15 control register
* r1 = machine ID
* r9 = processor ID
*/
.type __mmap_switched, %function
__mmap_switched:
adr r3, __switch_data + 4
ldmia r3!, {r4, r5, r6, r7}
cmp r4, r5 @ Copy data segment if needed
1: cmpne r5, r6
ldrne fp, [r4], #4
strne fp, [r5], #4
bne 1b
mov fp, #0 @ Clear BSS (and zero fp)
1: cmp r6, r7
strcc fp, [r6],#4
bcc 1b
ldmia r3, {r4, r5, r6, sp}
str r9, [r4] @ Save processor ID
str r1, [r5] @ Save machine type
bic r4, r0, #CR_A @ Clear 'A' bit
stmia r6, {r0, r4} @ Save control register values
b start_kernel
/*
* Exception handling. Something went wrong and we can't proceed. We
* ought to tell the user, but since we don't have any guarantee that
* we're even running on the right architecture, we do virtually nothing.
*
* If CONFIG_DEBUG_LL is set we try to print out something about the error
* and hope for the best (useful if bootloader fails to pass a proper
* machine ID for example).
*/
.type __error_p, %function
__error_p:
#ifdef CONFIG_DEBUG_LL
adr r0, str_p1
bl printascii
b __error
str_p1: .asciz "\nError: unrecognized/unsupported processor variant.\n"
.align
#endif
.type __error_a, %function
__error_a:
#ifdef CONFIG_DEBUG_LL
mov r4, r1 @ preserve machine ID
adr r0, str_a1
bl printascii
mov r0, r4
bl printhex8
adr r0, str_a2
bl printascii
adr r3, 3f
ldmia r3, {r4, r5, r6} @ get machine desc list
sub r4, r3, r4 @ get offset between virt&phys
add r5, r5, r4 @ convert virt addresses to
add r6, r6, r4 @ physical address space
1: ldr r0, [r5, #MACHINFO_TYPE] @ get machine type
bl printhex8
mov r0, #'\t'
bl printch
ldr r0, [r5, #MACHINFO_NAME] @ get machine name
add r0, r0, r4
bl printascii
mov r0, #'\n'
bl printch
add r5, r5, #SIZEOF_MACHINE_DESC @ next machine_desc
cmp r5, r6
blo 1b
adr r0, str_a3
bl printascii
b __error
str_a1: .asciz "\nError: unrecognized/unsupported machine ID (r1 = 0x"
str_a2: .asciz ").\n\nAvailable machine support:\n\nID (hex)\tNAME\n"
str_a3: .asciz "\nPlease check your kernel config and/or bootloader.\n"
.align
#endif
.type __error, %function
__error:
#ifdef CONFIG_ARCH_RPC
/*
* Turn the screen red on a error - RiscPC only.
*/
mov r0, #0x02000000
mov r3, #0x11
orr r3, r3, r3, lsl #8
orr r3, r3, r3, lsl #16
str r3, [r0], #4
str r3, [r0], #4
str r3, [r0], #4
str r3, [r0], #4
#endif
1: mov r0, r0
b 1b
/*
* Read processor ID register (CP#15, CR0), and look up in the linker-built
* supported processor list. Note that we can't use the absolute addresses
* for the __proc_info lists since we aren't running with the MMU on
* (and therefore, we are not in the correct address space). We have to
* calculate the offset.
*
* r9 = cpuid
* Returns:
* r3, r4, r6 corrupted
* r5 = proc_info pointer in physical address space
* r9 = cpuid (preserved)
*/
.type __lookup_processor_type, %function
__lookup_processor_type:
adr r3, 3f
ldmda r3, {r5 - r7}
sub r3, r3, r7 @ get offset between virt&phys
add r5, r5, r3 @ convert virt addresses to
add r6, r6, r3 @ physical address space
1: ldmia r5, {r3, r4} @ value, mask
and r4, r4, r9 @ mask wanted bits
teq r3, r4
beq 2f
add r5, r5, #PROC_INFO_SZ @ sizeof(proc_info_list)
cmp r5, r6
blo 1b
mov r5, #0 @ unknown processor
2: mov pc, lr
/*
* This provides a C-API version of the above function.
*/
ENTRY(lookup_processor_type)
stmfd sp!, {r4 - r7, r9, lr}
mov r9, r0
bl __lookup_processor_type
mov r0, r5
ldmfd sp!, {r4 - r7, r9, pc}
/*
* Look in include/asm-arm/procinfo.h and arch/arm/kernel/arch.[ch] for
* more information about the __proc_info and __arch_info structures.
*/
.long __proc_info_begin
.long __proc_info_end
3: .long .
.long __arch_info_begin
.long __arch_info_end
/*
* Lookup machine architecture in the linker-build list of architectures.
* Note that we can't use the absolute addresses for the __arch_info
* lists since we aren't running with the MMU on (and therefore, we are
* not in the correct address space). We have to calculate the offset.
*
* r1 = machine architecture number
* Returns:
* r3, r4, r6 corrupted
* r5 = mach_info pointer in physical address space
*/
.type __lookup_machine_type, %function
__lookup_machine_type:
adr r3, 3b
ldmia r3, {r4, r5, r6}
sub r3, r3, r4 @ get offset between virt&phys
add r5, r5, r3 @ convert virt addresses to
add r6, r6, r3 @ physical address space
1: ldr r3, [r5, #MACHINFO_TYPE] @ get machine type
teq r3, r1 @ matches loader number?
beq 2f @ found
add r5, r5, #SIZEOF_MACHINE_DESC @ next machine_desc
cmp r5, r6
blo 1b
mov r5, #0 @ unknown machine
2: mov pc, lr
/*
* This provides a C-API version of the above function.
*/
ENTRY(lookup_machine_type)
stmfd sp!, {r4 - r6, lr}
mov r1, r0
bl __lookup_machine_type
mov r0, r5
ldmfd sp!, {r4 - r6, pc}
arch/arm/kernel/head-nommu.S 0 → 100644
浏览文件 @ ae574a5d
/*
* linux/arch/arm/kernel/head-nommu.S
*
* Copyright (C) 1994-2002 Russell King
* Copyright (C) 2003-2006 Hyok S. Choi
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Common kernel startup code (non-paged MM)
* for 32-bit CPUs which has a process ID register(CP15).
*
*/
#include <linux/config.h>
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/mach-types.h>
#include <asm/procinfo.h>
#include <asm/ptrace.h>
#include <asm/constants.h>
#include <asm/system.h>
#define PROCINFO_INITFUNC 12
/*
* Kernel startup entry point.
* ---------------------------
*
* This is normally called from the decompressor code. The requirements
* are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0,
* r1 = machine nr.
*
* See linux/arch/arm/tools/mach-types for the complete list of machine
* numbers for r1.
*
*/
__INIT
.type stext, %function
ENTRY(stext)
msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | MODE_SVC @ ensure svc mode
@ and irqs disabled
mrc p15, 0, r9, c0, c0 @ get processor id
bl __lookup_processor_type @ r5=procinfo r9=cpuid
movs r10, r5 @ invalid processor (r5=0)?
beq __error_p @ yes, error 'p'
bl __lookup_machine_type @ r5=machinfo
movs r8, r5 @ invalid machine (r5=0)?
beq __error_a @ yes, error 'a'
ldr r13, __switch_data @ address to jump to after
@ the initialization is done
adr lr, __after_proc_init @ return (PIC) address
add pc, r10, #PROCINFO_INITFUNC
/*
* Set the Control Register and Read the process ID.
*/
.type __after_proc_init, %function
__after_proc_init:
mrc p15, 0, r0, c1, c0, 0 @ read control reg
#ifdef CONFIG_ALIGNMENT_TRAP
orr r0, r0, #CR_A
#else
bic r0, r0, #CR_A
#endif
#ifdef CONFIG_CPU_DCACHE_DISABLE
bic r0, r0, #CR_C
#endif
#ifdef CONFIG_CPU_BPREDICT_DISABLE
bic r0, r0, #CR_Z
#endif
#ifdef CONFIG_CPU_ICACHE_DISABLE
bic r0, r0, #CR_I
#endif
mcr p15, 0, r0, c1, c0, 0 @ write control reg
mov pc, r13 @ clear the BSS and jump
@ to start_kernel
#include "head-common.S"
arch/arm/kernel/head.S
浏览文件 @ ae574a5d
......@@ -102,49 +102,6 @@ ENTRY(stext)
adr lr, __enable_mmu @ return (PIC) address
add pc, r10, #PROCINFO_INITFUNC
.type __switch_data, %object
__switch_data:
.long __mmap_switched
.long __data_loc @ r4
.long __data_start @ r5
.long __bss_start @ r6
.long _end @ r7
.long processor_id @ r4
.long __machine_arch_type @ r5
.long cr_alignment @ r6
.long init_thread_union + THREAD_START_SP @ sp
/*
* The following fragment of code is executed with the MMU on, and uses
* absolute addresses; this is not position independent.
*
* r0 = cp#15 control register
* r1 = machine ID
* r9 = processor ID
*/
.type __mmap_switched, %function
__mmap_switched:
adr r3, __switch_data + 4
ldmia r3!, {r4, r5, r6, r7}
cmp r4, r5 @ Copy data segment if needed
1: cmpne r5, r6
ldrne fp, [r4], #4
strne fp, [r5], #4
bne 1b
mov fp, #0 @ Clear BSS (and zero fp)
1: cmp r6, r7
strcc fp, [r6],#4
bcc 1b
ldmia r3, {r4, r5, r6, sp}
str r9, [r4] @ Save processor ID
str r1, [r5] @ Save machine type
bic r4, r0, #CR_A @ Clear 'A' bit
stmia r6, {r0, r4} @ Save control register values
b start_kernel
#if defined(CONFIG_SMP)
.type secondary_startup, #function
ENTRY(secondary_startup)
......@@ -367,166 +324,4 @@ __create_page_tables:
mov pc, lr
.ltorg
/*
* Exception handling. Something went wrong and we can't proceed. We
* ought to tell the user, but since we don't have any guarantee that
* we're even running on the right architecture, we do virtually nothing.
*
* If CONFIG_DEBUG_LL is set we try to print out something about the error
* and hope for the best (useful if bootloader fails to pass a proper
* machine ID for example).
*/
.type __error_p, %function
__error_p:
#ifdef CONFIG_DEBUG_LL
adr r0, str_p1
bl printascii
b __error
str_p1: .asciz "\nError: unrecognized/unsupported processor variant.\n"
.align
#endif
.type __error_a, %function
__error_a:
#ifdef CONFIG_DEBUG_LL
mov r4, r1 @ preserve machine ID
adr r0, str_a1
bl printascii
mov r0, r4
bl printhex8
adr r0, str_a2
bl printascii
adr r3, 3f
ldmia r3, {r4, r5, r6} @ get machine desc list
sub r4, r3, r4 @ get offset between virt&phys
add r5, r5, r4 @ convert virt addresses to
add r6, r6, r4 @ physical address space
1: ldr r0, [r5, #MACHINFO_TYPE] @ get machine type
bl printhex8
mov r0, #'\t'
bl printch
ldr r0, [r5, #MACHINFO_NAME] @ get machine name
add r0, r0, r4
bl printascii
mov r0, #'\n'
bl printch
add r5, r5, #SIZEOF_MACHINE_DESC @ next machine_desc
cmp r5, r6
blo 1b
adr r0, str_a3
bl printascii
b __error
str_a1: .asciz "\nError: unrecognized/unsupported machine ID (r1 = 0x"
str_a2: .asciz ").\n\nAvailable machine support:\n\nID (hex)\tNAME\n"
str_a3: .asciz "\nPlease check your kernel config and/or bootloader.\n"
.align
#endif
.type __error, %function
__error:
#ifdef CONFIG_ARCH_RPC
/*
* Turn the screen red on a error - RiscPC only.
*/
mov r0, #0x02000000
mov r3, #0x11
orr r3, r3, r3, lsl #8
orr r3, r3, r3, lsl #16
str r3, [r0], #4
str r3, [r0], #4
str r3, [r0], #4
str r3, [r0], #4
#endif
1: mov r0, r0
b 1b
/*
* Read processor ID register (CP#15, CR0), and look up in the linker-built
* supported processor list. Note that we can't use the absolute addresses
* for the __proc_info lists since we aren't running with the MMU on
* (and therefore, we are not in the correct address space). We have to
* calculate the offset.
*
* r9 = cpuid
* Returns:
* r3, r4, r6 corrupted
* r5 = proc_info pointer in physical address space
* r9 = cpuid (preserved)
*/
.type __lookup_processor_type, %function
__lookup_processor_type:
adr r3, 3f
ldmda r3, {r5 - r7}
sub r3, r3, r7 @ get offset between virt&phys
add r5, r5, r3 @ convert virt addresses to
add r6, r6, r3 @ physical address space
1: ldmia r5, {r3, r4} @ value, mask
and r4, r4, r9 @ mask wanted bits
teq r3, r4
beq 2f
add r5, r5, #PROC_INFO_SZ @ sizeof(proc_info_list)
cmp r5, r6
blo 1b
mov r5, #0 @ unknown processor
2: mov pc, lr
/*
* This provides a C-API version of the above function.
*/
ENTRY(lookup_processor_type)
stmfd sp!, {r4 - r7, r9, lr}
mov r9, r0
bl __lookup_processor_type
mov r0, r5
ldmfd sp!, {r4 - r7, r9, pc}
/*
* Look in include/asm-arm/procinfo.h and arch/arm/kernel/arch.[ch] for
* more information about the __proc_info and __arch_info structures.
*/
.long __proc_info_begin
.long __proc_info_end
3: .long .
.long __arch_info_begin
.long __arch_info_end
/*
* Lookup machine architecture in the linker-build list of architectures.
* Note that we can't use the absolute addresses for the __arch_info
* lists since we aren't running with the MMU on (and therefore, we are
* not in the correct address space). We have to calculate the offset.
*
* r1 = machine architecture number
* Returns:
* r3, r4, r6 corrupted
* r5 = mach_info pointer in physical address space
*/
.type __lookup_machine_type, %function
__lookup_machine_type:
adr r3, 3b
ldmia r3, {r4, r5, r6}
sub r3, r3, r4 @ get offset between virt&phys
add r5, r5, r3 @ convert virt addresses to
add r6, r6, r3 @ physical address space
1: ldr r3, [r5, #MACHINFO_TYPE] @ get machine type
teq r3, r1 @ matches loader number?
beq 2f @ found
add r5, r5, #SIZEOF_MACHINE_DESC @ next machine_desc
cmp r5, r6
blo 1b
mov r5, #0 @ unknown machine
2: mov pc, lr
/*
* This provides a C-API version of the above function.
*/
ENTRY(lookup_machine_type)
stmfd sp!, {r4 - r6, lr}
mov r1, r0
bl __lookup_machine_type
mov r0, r5
ldmfd sp!, {r4 - r6, pc}
#include "head-common.S"
arch/arm/kernel/signal.h
浏览文件 @ ae574a5d
......@@ -7,6 +7,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#define KERN_SIGRETURN_CODE 0xffff0500
#define KERN_SIGRETURN_CODE (CONFIG_VECTORS_BASE + 0x00000500)
extern const unsigned long sigreturn_codes[7];
arch/arm/kernel/traps.c
浏览文件 @ ae574a5d
......@@ -688,6 +688,7 @@ EXPORT_SYMBOL(abort);
void __init trap_init(void)
{
unsigned long vectors = CONFIG_VECTORS_BASE;
extern char __stubs_start[], __stubs_end[];
extern char __vectors_start[], __vectors_end[];
extern char __kuser_helper_start[], __kuser_helper_end[];
......@@ -698,9 +699,9 @@ void __init trap_init(void)
* into the vector page, mapped at 0xffff0000, and ensure these
* are visible to the instruction stream.
*/
memcpy((void *)0xffff0000, __vectors_start, __vectors_end - __vectors_start);
memcpy((void *)0xffff0200, __stubs_start, __stubs_end - __stubs_start);
memcpy((void *)0xffff1000 - kuser_sz, __kuser_helper_start, kuser_sz);
memcpy((void *)vectors, __vectors_start, __vectors_end - __vectors_start);
memcpy((void *)vectors + 0x200, __stubs_start, __stubs_end - __stubs_start);
memcpy((void *)vectors + 0x1000 - kuser_sz, __kuser_helper_start, kuser_sz);
/*
* Copy signal return handlers into the vector page, and
......@@ -709,6 +710,6 @@ void __init trap_init(void)
memcpy((void *)KERN_SIGRETURN_CODE, sigreturn_codes,
sizeof(sigreturn_codes));
flush_icache_range(0xffff0000, 0xffff0000 + PAGE_SIZE);
flush_icache_range(vectors, vectors + PAGE_SIZE);
modify_domain(DOMAIN_USER, DOMAIN_CLIENT);
}
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或