提交 abd209b7 编写于 作者: L Linus Torvalds

Merge branch 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull iommu core changes from Ingo Molnar:
 "The IOMMU changes in this cycle are mostly about factoring out
  Intel-VT-d specific IRQ remapping details and introducing struct
  irq_remap_ops, in preparation for AMD specific hardware."

* 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  iommu: Fix off by one in dmar_get_fault_reason()
  irq_remap: Fix the 'sub_handle' uninitialized warning
  irq_remap: Fix UP build failure
  irq_remap: Fix compiler warning with CONFIG_IRQ_REMAP=y
  iommu: rename intr_remapping.[ch] to irq_remapping.[ch]
  iommu: rename intr_remapping references to irq_remapping
  x86, iommu/vt-d: Clean up interfaces for interrupt remapping
  iommu/vt-d: Convert MSI remapping setup to remap_ops
  iommu/vt-d: Convert free_irte into a remap_ops callback
  iommu/vt-d: Convert IR set_affinity function to remap_ops
  iommu/vt-d: Convert IR ioapic-setup to use remap_ops
  iommu/vt-d: Convert missing apic.c intr-remapping call to remap_ops
  iommu/vt-d: Make intr-remapping initialization generic
  iommu: Rename intr_remapping files to intel_intr_remapping
#ifndef __IA64_INTR_REMAPPING_H
#define __IA64_INTR_REMAPPING_H
#define irq_remapping_enabled 0
#endif
#ifndef _ASM_X86_IRQ_REMAPPING_H
#define _ASM_X86_IRQ_REMAPPING_H
/*
* Copyright (C) 2012 Advanced Micro Devices, Inc.
* Author: Joerg Roedel <joerg.roedel@amd.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* This header file contains the interface of the interrupt remapping code to
* the x86 interrupt management code.
*/
#define IRTE_DEST(dest) ((x2apic_mode) ? dest : dest << 8)
#ifndef __X86_IRQ_REMAPPING_H
#define __X86_IRQ_REMAPPING_H
#include <asm/io_apic.h>
#ifdef CONFIG_IRQ_REMAP
static void irq_remap_modify_chip_defaults(struct irq_chip *chip);
static inline void prepare_irte(struct irte *irte, int vector,
unsigned int dest)
extern int irq_remapping_enabled;
extern void setup_irq_remapping_ops(void);
extern int irq_remapping_supported(void);
extern int irq_remapping_prepare(void);
extern int irq_remapping_enable(void);
extern void irq_remapping_disable(void);
extern int irq_remapping_reenable(int);
extern int irq_remap_enable_fault_handling(void);
extern int setup_ioapic_remapped_entry(int irq,
struct IO_APIC_route_entry *entry,
unsigned int destination,
int vector,
struct io_apic_irq_attr *attr);
extern int set_remapped_irq_affinity(struct irq_data *data,
const struct cpumask *mask,
bool force);
extern void free_remapped_irq(int irq);
extern void compose_remapped_msi_msg(struct pci_dev *pdev,
unsigned int irq, unsigned int dest,
struct msi_msg *msg, u8 hpet_id);
extern int msi_alloc_remapped_irq(struct pci_dev *pdev, int irq, int nvec);
extern int msi_setup_remapped_irq(struct pci_dev *pdev, unsigned int irq,
int index, int sub_handle);
extern int setup_hpet_msi_remapped(unsigned int irq, unsigned int id);
#else /* CONFIG_IRQ_REMAP */
#define irq_remapping_enabled 0
static inline void setup_irq_remapping_ops(void) { }
static inline int irq_remapping_supported(void) { return 0; }
static inline int irq_remapping_prepare(void) { return -ENODEV; }
static inline int irq_remapping_enable(void) { return -ENODEV; }
static inline void irq_remapping_disable(void) { }
static inline int irq_remapping_reenable(int eim) { return -ENODEV; }
static inline int irq_remap_enable_fault_handling(void) { return -ENODEV; }
static inline int setup_ioapic_remapped_entry(int irq,
struct IO_APIC_route_entry *entry,
unsigned int destination,
int vector,
struct io_apic_irq_attr *attr)
{
return -ENODEV;
}
static inline int set_remapped_irq_affinity(struct irq_data *data,
const struct cpumask *mask,
bool force)
{
memset(irte, 0, sizeof(*irte));
irte->present = 1;
irte->dst_mode = apic->irq_dest_mode;
/*
* Trigger mode in the IRTE will always be edge, and for IO-APIC, the
* actual level or edge trigger will be setup in the IO-APIC
* RTE. This will help simplify level triggered irq migration.
* For more details, see the comments (in io_apic.c) explainig IO-APIC
* irq migration in the presence of interrupt-remapping.
*/
irte->trigger_mode = 0;
irte->dlvry_mode = apic->irq_delivery_mode;
irte->vector = vector;
irte->dest_id = IRTE_DEST(dest);
irte->redir_hint = 1;
return 0;
}
static inline bool irq_remapped(struct irq_cfg *cfg)
static inline void free_remapped_irq(int irq) { }
static inline void compose_remapped_msi_msg(struct pci_dev *pdev,
unsigned int irq, unsigned int dest,
struct msi_msg *msg, u8 hpet_id)
{
return cfg->irq_2_iommu.iommu != NULL;
}
#else
static void prepare_irte(struct irte *irte, int vector, unsigned int dest)
static inline int msi_alloc_remapped_irq(struct pci_dev *pdev, int irq, int nvec)
{
return -ENODEV;
}
static inline bool irq_remapped(struct irq_cfg *cfg)
static inline int msi_setup_remapped_irq(struct pci_dev *pdev, unsigned int irq,
int index, int sub_handle)
{
return false;
return -ENODEV;
}
static inline void irq_remap_modify_chip_defaults(struct irq_chip *chip)
static inline int setup_hpet_msi_remapped(unsigned int irq, unsigned int id)
{
return -ENODEV;
}
#endif
#endif /* CONFIG_IRQ_REMAP */
#endif /* _ASM_X86_IRQ_REMAPPING_H */
#endif /* __X86_IRQ_REMAPPING_H */
......@@ -35,6 +35,7 @@
#include <linux/smp.h>
#include <linux/mm.h>
#include <asm/irq_remapping.h>
#include <asm/perf_event.h>
#include <asm/x86_init.h>
#include <asm/pgalloc.h>
......@@ -1441,8 +1442,8 @@ void __init bsp_end_local_APIC_setup(void)
* Now that local APIC setup is completed for BP, configure the fault
* handling for interrupt remapping.
*/
if (intr_remapping_enabled)
enable_drhd_fault_handling();
if (irq_remapping_enabled)
irq_remap_enable_fault_handling();
}
......@@ -1517,7 +1518,7 @@ void enable_x2apic(void)
int __init enable_IR(void)
{
#ifdef CONFIG_IRQ_REMAP
if (!intr_remapping_supported()) {
if (!irq_remapping_supported()) {
pr_debug("intr-remapping not supported\n");
return -1;
}
......@@ -1528,7 +1529,7 @@ int __init enable_IR(void)
return -1;
}
return enable_intr_remapping();
return irq_remapping_enable();
#endif
return -1;
}
......@@ -1537,10 +1538,13 @@ void __init enable_IR_x2apic(void)
{
unsigned long flags;
int ret, x2apic_enabled = 0;
int dmar_table_init_ret;
int hardware_init_ret;
dmar_table_init_ret = dmar_table_init();
if (dmar_table_init_ret && !x2apic_supported())
/* Make sure irq_remap_ops are initialized */
setup_irq_remapping_ops();
hardware_init_ret = irq_remapping_prepare();
if (hardware_init_ret && !x2apic_supported())
return;
ret = save_ioapic_entries();
......@@ -1556,7 +1560,7 @@ void __init enable_IR_x2apic(void)
if (x2apic_preenabled && nox2apic)
disable_x2apic();
if (dmar_table_init_ret)
if (hardware_init_ret)
ret = -1;
else
ret = enable_IR();
......@@ -2176,8 +2180,8 @@ static int lapic_suspend(void)
local_irq_save(flags);
disable_local_APIC();
if (intr_remapping_enabled)
disable_intr_remapping();
if (irq_remapping_enabled)
irq_remapping_disable();
local_irq_restore(flags);
return 0;
......@@ -2193,7 +2197,7 @@ static void lapic_resume(void)
return;
local_irq_save(flags);
if (intr_remapping_enabled) {
if (irq_remapping_enabled) {
/*
* IO-APIC and PIC have their own resume routines.
* We just mask them here to make sure the interrupt
......@@ -2245,8 +2249,8 @@ static void lapic_resume(void)
apic_write(APIC_ESR, 0);
apic_read(APIC_ESR);
if (intr_remapping_enabled)
reenable_intr_remapping(x2apic_mode);
if (irq_remapping_enabled)
irq_remapping_reenable(x2apic_mode);
local_irq_restore(flags);
}
......
......@@ -86,6 +86,22 @@ void __init set_io_apic_ops(const struct io_apic_ops *ops)
io_apic_ops = *ops;
}
#ifdef CONFIG_IRQ_REMAP
static void irq_remap_modify_chip_defaults(struct irq_chip *chip);
static inline bool irq_remapped(struct irq_cfg *cfg)
{
return cfg->irq_2_iommu.iommu != NULL;
}
#else
static inline bool irq_remapped(struct irq_cfg *cfg)
{
return false;
}
static inline void irq_remap_modify_chip_defaults(struct irq_chip *chip)
{
}
#endif
/*
* Is the SiS APIC rmw bug present ?
* -1 = don't know, 0 = no, 1 = yes
......@@ -1361,77 +1377,13 @@ static void ioapic_register_intr(unsigned int irq, struct irq_cfg *cfg,
fasteoi ? "fasteoi" : "edge");
}
static int setup_ir_ioapic_entry(int irq,
struct IR_IO_APIC_route_entry *entry,
unsigned int destination, int vector,
struct io_apic_irq_attr *attr)
{
int index;
struct irte irte;
int ioapic_id = mpc_ioapic_id(attr->ioapic);
struct intel_iommu *iommu = map_ioapic_to_ir(ioapic_id);
if (!iommu) {
pr_warn("No mapping iommu for ioapic %d\n", ioapic_id);
return -ENODEV;
}
index = alloc_irte(iommu, irq, 1);
if (index < 0) {
pr_warn("Failed to allocate IRTE for ioapic %d\n", ioapic_id);
return -ENOMEM;
}
prepare_irte(&irte, vector, destination);
/* Set source-id of interrupt request */
set_ioapic_sid(&irte, ioapic_id);
modify_irte(irq, &irte);
apic_printk(APIC_VERBOSE, KERN_DEBUG "IOAPIC[%d]: "
"Set IRTE entry (P:%d FPD:%d Dst_Mode:%d "
"Redir_hint:%d Trig_Mode:%d Dlvry_Mode:%X "
"Avail:%X Vector:%02X Dest:%08X "
"SID:%04X SQ:%X SVT:%X)\n",
attr->ioapic, irte.present, irte.fpd, irte.dst_mode,
irte.redir_hint, irte.trigger_mode, irte.dlvry_mode,
irte.avail, irte.vector, irte.dest_id,
irte.sid, irte.sq, irte.svt);
memset(entry, 0, sizeof(*entry));
entry->index2 = (index >> 15) & 0x1;
entry->zero = 0;
entry->format = 1;
entry->index = (index & 0x7fff);
/*
* IO-APIC RTE will be configured with virtual vector.
* irq handler will do the explicit EOI to the io-apic.
*/
entry->vector = attr->ioapic_pin;
entry->mask = 0; /* enable IRQ */
entry->trigger = attr->trigger;
entry->polarity = attr->polarity;
/* Mask level triggered irqs.
* Use IRQ_DELAYED_DISABLE for edge triggered irqs.
*/
if (attr->trigger)
entry->mask = 1;
return 0;
}
static int setup_ioapic_entry(int irq, struct IO_APIC_route_entry *entry,
unsigned int destination, int vector,
struct io_apic_irq_attr *attr)
{
if (intr_remapping_enabled)
return setup_ir_ioapic_entry(irq,
(struct IR_IO_APIC_route_entry *)entry,
destination, vector, attr);
if (irq_remapping_enabled)
return setup_ioapic_remapped_entry(irq, entry, destination,
vector, attr);
memset(entry, 0, sizeof(*entry));
......@@ -1588,7 +1540,7 @@ static void __init setup_timer_IRQ0_pin(unsigned int ioapic_idx,
{
struct IO_APIC_route_entry entry;
if (intr_remapping_enabled)
if (irq_remapping_enabled)
return;
memset(&entry, 0, sizeof(entry));
......@@ -1674,7 +1626,7 @@ __apicdebuginit(void) print_IO_APIC(int ioapic_idx)
printk(KERN_DEBUG ".... IRQ redirection table:\n");
if (intr_remapping_enabled) {
if (irq_remapping_enabled) {
printk(KERN_DEBUG " NR Indx Fmt Mask Trig IRR"
" Pol Stat Indx2 Zero Vect:\n");
} else {
......@@ -1683,7 +1635,7 @@ __apicdebuginit(void) print_IO_APIC(int ioapic_idx)
}
for (i = 0; i <= reg_01.bits.entries; i++) {
if (intr_remapping_enabled) {
if (irq_remapping_enabled) {
struct IO_APIC_route_entry entry;
struct IR_IO_APIC_route_entry *ir_entry;
......@@ -2050,7 +2002,7 @@ void disable_IO_APIC(void)
* IOAPIC RTE as well as interrupt-remapping table entry).
* As this gets called during crash dump, keep this simple for now.
*/
if (ioapic_i8259.pin != -1 && !intr_remapping_enabled) {
if (ioapic_i8259.pin != -1 && !irq_remapping_enabled) {
struct IO_APIC_route_entry entry;
memset(&entry, 0, sizeof(entry));
......@@ -2074,7 +2026,7 @@ void disable_IO_APIC(void)
* Use virtual wire A mode when interrupt remapping is enabled.
*/
if (cpu_has_apic || apic_from_smp_config())
disconnect_bsp_APIC(!intr_remapping_enabled &&
disconnect_bsp_APIC(!irq_remapping_enabled &&
ioapic_i8259.pin != -1);
}
......@@ -2390,71 +2342,6 @@ ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask,
return ret;
}
#ifdef CONFIG_IRQ_REMAP
/*
* Migrate the IO-APIC irq in the presence of intr-remapping.
*
* For both level and edge triggered, irq migration is a simple atomic
* update(of vector and cpu destination) of IRTE and flush the hardware cache.
*
* For level triggered, we eliminate the io-apic RTE modification (with the
* updated vector information), by using a virtual vector (io-apic pin number).
* Real vector that is used for interrupting cpu will be coming from
* the interrupt-remapping table entry.
*
* As the migration is a simple atomic update of IRTE, the same mechanism
* is used to migrate MSI irq's in the presence of interrupt-remapping.
*/
static int
ir_ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask,
bool force)
{
struct irq_cfg *cfg = data->chip_data;
unsigned int dest, irq = data->irq;
struct irte irte;
if (!cpumask_intersects(mask, cpu_online_mask))
return -EINVAL;
if (get_irte(irq, &irte))
return -EBUSY;
if (assign_irq_vector(irq, cfg, mask))
return -EBUSY;
dest = apic->cpu_mask_to_apicid_and(cfg->domain, mask);
irte.vector = cfg->vector;
irte.dest_id = IRTE_DEST(dest);
/*
* Atomically updates the IRTE with the new destination, vector
* and flushes the interrupt entry cache.
*/
modify_irte(irq, &irte);
/*
* After this point, all the interrupts will start arriving
* at the new destination. So, time to cleanup the previous
* vector allocation.
*/
if (cfg->move_in_progress)
send_cleanup_vector(cfg);
cpumask_copy(data->affinity, mask);
return 0;
}
#else
static inline int
ir_ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask,
bool force)
{
return 0;
}
#endif
asmlinkage void smp_irq_move_cleanup_interrupt(void)
{
unsigned vector, me;
......@@ -2699,7 +2586,7 @@ static void irq_remap_modify_chip_defaults(struct irq_chip *chip)
chip->irq_eoi = ir_ack_apic_level;
#ifdef CONFIG_SMP
chip->irq_set_affinity = ir_ioapic_set_affinity;
chip->irq_set_affinity = set_remapped_irq_affinity;
#endif
}
#endif /* CONFIG_IRQ_REMAP */
......@@ -2912,7 +2799,7 @@ static inline void __init check_timer(void)
* 8259A.
*/
if (pin1 == -1) {
if (intr_remapping_enabled)
if (irq_remapping_enabled)
panic("BIOS bug: timer not connected to IO-APIC");
pin1 = pin2;
apic1 = apic2;
......@@ -2945,7 +2832,7 @@ static inline void __init check_timer(void)
clear_IO_APIC_pin(0, pin1);
goto out;
}
if (intr_remapping_enabled)
if (irq_remapping_enabled)
panic("timer doesn't work through Interrupt-remapped IO-APIC");
local_irq_disable();
clear_IO_APIC_pin(apic1, pin1);
......@@ -3169,7 +3056,7 @@ void destroy_irq(unsigned int irq)
irq_set_status_flags(irq, IRQ_NOREQUEST|IRQ_NOPROBE);
if (irq_remapped(cfg))
free_irte(irq);
free_remapped_irq(irq);
raw_spin_lock_irqsave(&vector_lock, flags);
__clear_irq_vector(irq, cfg);
raw_spin_unlock_irqrestore(&vector_lock, flags);
......@@ -3198,54 +3085,34 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq,
dest = apic->cpu_mask_to_apicid_and(cfg->domain, apic->target_cpus());
if (irq_remapped(cfg)) {
struct irte irte;
int ir_index;
u16 sub_handle;
ir_index = map_irq_to_irte_handle(irq, &sub_handle);
BUG_ON(ir_index == -1);
prepare_irte(&irte, cfg->vector, dest);
/* Set source-id of interrupt request */
if (pdev)
set_msi_sid(&irte, pdev);
else
set_hpet_sid(&irte, hpet_id);
modify_irte(irq, &irte);
compose_remapped_msi_msg(pdev, irq, dest, msg, hpet_id);
return err;
}
if (x2apic_enabled())
msg->address_hi = MSI_ADDR_BASE_HI |
MSI_ADDR_EXT_DEST_ID(dest);
else
msg->address_hi = MSI_ADDR_BASE_HI;
msg->data = sub_handle;
msg->address_lo = MSI_ADDR_BASE_LO | MSI_ADDR_IR_EXT_INT |
MSI_ADDR_IR_SHV |
MSI_ADDR_IR_INDEX1(ir_index) |
MSI_ADDR_IR_INDEX2(ir_index);
} else {
if (x2apic_enabled())
msg->address_hi = MSI_ADDR_BASE_HI |
MSI_ADDR_EXT_DEST_ID(dest);
else
msg->address_hi = MSI_ADDR_BASE_HI;
msg->address_lo =
MSI_ADDR_BASE_LO |
((apic->irq_dest_mode == 0) ?
MSI_ADDR_DEST_MODE_PHYSICAL:
MSI_ADDR_DEST_MODE_LOGICAL) |
((apic->irq_delivery_mode != dest_LowestPrio) ?
MSI_ADDR_REDIRECTION_CPU:
MSI_ADDR_REDIRECTION_LOWPRI) |
MSI_ADDR_DEST_ID(dest);
msg->address_lo =
MSI_ADDR_BASE_LO |
((apic->irq_dest_mode == 0) ?
MSI_ADDR_DEST_MODE_PHYSICAL:
MSI_ADDR_DEST_MODE_LOGICAL) |
((apic->irq_delivery_mode != dest_LowestPrio) ?
MSI_ADDR_REDIRECTION_CPU:
MSI_ADDR_REDIRECTION_LOWPRI) |
MSI_ADDR_DEST_ID(dest);
msg->data =
MSI_DATA_TRIGGER_EDGE |
MSI_DATA_LEVEL_ASSERT |
((apic->irq_delivery_mode != dest_LowestPrio) ?
MSI_DATA_DELIVERY_FIXED:
MSI_DATA_DELIVERY_LOWPRI) |
MSI_DATA_VECTOR(cfg->vector);
msg->data =
MSI_DATA_TRIGGER_EDGE |
MSI_DATA_LEVEL_ASSERT |
((apic->irq_delivery_mode != dest_LowestPrio) ?
MSI_DATA_DELIVERY_FIXED:
MSI_DATA_DELIVERY_LOWPRI) |
MSI_DATA_VECTOR(cfg->vector);
}
return err;
}
......@@ -3288,33 +3155,6 @@ static struct irq_chip msi_chip = {
.irq_retrigger = ioapic_retrigger_irq,
};
/*
* Map the PCI dev to the corresponding remapping hardware unit
* and allocate 'nvec' consecutive interrupt-remapping table entries
* in it.
*/
static int msi_alloc_irte(struct pci_dev *dev, int irq, int nvec)
{
struct intel_iommu *iommu;
int index;
iommu = map_dev_to_ir(dev);
if (!iommu) {
printk(KERN_ERR
"Unable to map PCI %s to iommu\n", pci_name(dev));
return -ENOENT;
}
index = alloc_irte(iommu, irq, nvec);
if (index < 0) {
printk(KERN_ERR
"Unable to allocate %d IRTE for PCI %s\n", nvec,
pci_name(dev));
return -ENOSPC;
}
return index;
}
static int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc, int irq)
{
struct irq_chip *chip = &msi_chip;
......@@ -3345,7 +3185,6 @@ int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
int node, ret, sub_handle, index = 0;
unsigned int irq, irq_want;
struct msi_desc *msidesc;
struct intel_iommu *iommu = NULL;
/* x86 doesn't support multiple MSI yet */
if (type == PCI_CAP_ID_MSI && nvec > 1)
......@@ -3359,7 +3198,7 @@ int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
if (irq == 0)
return -1;
irq_want = irq + 1;
if (!intr_remapping_enabled)
if (!irq_remapping_enabled)
goto no_ir;
if (!sub_handle) {
......@@ -3367,23 +3206,16 @@ int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
* allocate the consecutive block of IRTE's
* for 'nvec'
*/
index = msi_alloc_irte(dev, irq, nvec);
index = msi_alloc_remapped_irq(dev, irq, nvec);
if (index < 0) {
ret = index;
goto error;
}
} else {
iommu = map_dev_to_ir(dev);
if (!iommu) {
ret = -ENOENT;
ret = msi_setup_remapped_irq(dev, irq, index,
sub_handle);
if (ret < 0)
goto error;
}
/*
* setup the mapping between the irq and the IRTE
* base index, the sub_handle pointing to the
* appropriate interrupt remap table entry.
*/
set_irte_irq(irq, iommu, index, sub_handle);
}
no_ir:
ret = setup_msi_irq(dev, msidesc, irq);
......@@ -3501,15 +3333,8 @@ int arch_setup_hpet_msi(unsigned int irq, unsigned int id)
struct msi_msg msg;
int ret;
if (intr_remapping_enabled) {
struct intel_iommu *iommu = map_hpet_to_ir(id);
int index;
if (!iommu)
return -1;
index = alloc_irte(iommu, irq, 1);
if (index < 0)
if (irq_remapping_enabled) {
if (!setup_hpet_msi_remapped(irq, id))
return -1;
}
......@@ -3888,8 +3713,8 @@ void __init setup_ioapic_dest(void)
else
mask = apic->target_cpus();
if (intr_remapping_enabled)
ir_ioapic_set_affinity(idata, mask, false);
if (irq_remapping_enabled)
set_remapped_irq_affinity(idata, mask, false);
else
ioapic_set_affinity(idata, mask, false);
}
......
......@@ -4,7 +4,7 @@ obj-$(CONFIG_AMD_IOMMU) += amd_iommu.o amd_iommu_init.o
obj-$(CONFIG_AMD_IOMMU_V2) += amd_iommu_v2.o
obj-$(CONFIG_DMAR_TABLE) += dmar.o
obj-$(CONFIG_INTEL_IOMMU) += iova.o intel-iommu.o
obj-$(CONFIG_IRQ_REMAP) += intr_remapping.o
obj-$(CONFIG_IRQ_REMAP) += intel_irq_remapping.o irq_remapping.o
obj-$(CONFIG_OMAP_IOMMU) += omap-iommu.o
obj-$(CONFIG_OMAP_IOVMM) += omap-iovmm.o
obj-$(CONFIG_OMAP_IOMMU_DEBUG) += omap-iommu-debug.o
......
......@@ -36,6 +36,7 @@
#include <linux/tboot.h>
#include <linux/dmi.h>
#include <linux/slab.h>
#include <asm/irq_remapping.h>
#include <asm/iommu_table.h>
#define PREFIX "DMAR: "
......@@ -555,7 +556,7 @@ int __init detect_intel_iommu(void)
dmar = (struct acpi_table_dmar *) dmar_tbl;
if (ret && intr_remapping_enabled && cpu_has_x2apic &&
if (ret && irq_remapping_enabled && cpu_has_x2apic &&
dmar->flags & 0x1)
printk(KERN_INFO
"Queued invalidation will be enabled to support x2apic and Intr-remapping.\n");
......@@ -1041,7 +1042,7 @@ static const char *dma_remap_fault_reasons[] =
"non-zero reserved fields in PTE",
};
static const char *intr_remap_fault_reasons[] =
static const char *irq_remap_fault_reasons[] =
{
"Detected reserved fields in the decoded interrupt-remapped request",
"Interrupt index exceeded the interrupt-remapping table size",
......@@ -1056,10 +1057,10 @@ static const char *intr_remap_fault_reasons[] =
const char *dmar_get_fault_reason(u8 fault_reason, int *fault_type)
{
if (fault_reason >= 0x20 && (fault_reason <= 0x20 +
ARRAY_SIZE(intr_remap_fault_reasons))) {
if (fault_reason >= 0x20 && (fault_reason - 0x20 <
ARRAY_SIZE(irq_remap_fault_reasons))) {
*fault_type = INTR_REMAP;
return intr_remap_fault_reasons[fault_reason - 0x20];
return irq_remap_fault_reasons[fault_reason - 0x20];
} else if (fault_reason < ARRAY_SIZE(dma_remap_fault_reasons)) {
*fault_type = DMA_REMAP;
return dma_remap_fault_reasons[fault_reason];
......
......@@ -42,6 +42,7 @@
#include <linux/dmi.h>
#include <linux/pci-ats.h>
#include <linux/memblock.h>
#include <asm/irq_remapping.h>
#include <asm/cacheflush.h>
#include <asm/iommu.h>
......@@ -4082,7 +4083,7 @@ static int intel_iommu_domain_has_cap(struct iommu_domain *domain,
if (cap == IOMMU_CAP_CACHE_COHERENCY)
return dmar_domain->iommu_snooping;
if (cap == IOMMU_CAP_INTR_REMAP)
return intr_remapping_enabled;
return irq_remapping_enabled;
return 0;
}
......
......@@ -10,49 +10,33 @@
#include <asm/smp.h>
#include <asm/cpu.h>
#include <linux/intel-iommu.h>
#include "intr_remapping.h"
#include <acpi/acpi.h>
#include <asm/irq_remapping.h>
#include <asm/pci-direct.h>
#include <asm/msidef.h>
static struct ioapic_scope ir_ioapic[MAX_IO_APICS];
static struct hpet_scope ir_hpet[MAX_HPET_TBS];
static int ir_ioapic_num, ir_hpet_num;
int intr_remapping_enabled;
static int disable_intremap;
static int disable_sourceid_checking;
static int no_x2apic_optout;
#include "irq_remapping.h"
static __init int setup_nointremap(char *str)
{
disable_intremap = 1;
return 0;
}
early_param("nointremap", setup_nointremap);
struct ioapic_scope {
struct intel_iommu *iommu;
unsigned int id;
unsigned int bus; /* PCI bus number */
unsigned int devfn; /* PCI devfn number */
};
static __init int setup_intremap(char *str)
{
if (!str)
return -EINVAL;
struct hpet_scope {
struct intel_iommu *iommu;
u8 id;
unsigned int bus;
unsigned int devfn;
};
while (*str) {
if (!strncmp(str, "on", 2))
disable_intremap = 0;
else if (!strncmp(str, "off", 3))
disable_intremap = 1;
else if (!strncmp(str, "nosid", 5))
disable_sourceid_checking = 1;
else if (!strncmp(str, "no_x2apic_optout", 16))
no_x2apic_optout = 1;
str += strcspn(str, ",");
while (*str == ',')
str++;
}
#define IR_X2APIC_MODE(mode) (mode ? (1 << 11) : 0)
#define IRTE_DEST(dest) ((x2apic_mode) ? dest : dest << 8)
return 0;
}
early_param("intremap", setup_intremap);
static struct ioapic_scope ir_ioapic[MAX_IO_APICS];
static struct hpet_scope ir_hpet[MAX_HPET_TBS];
static int ir_ioapic_num, ir_hpet_num;
static DEFINE_RAW_SPINLOCK(irq_2_ir_lock);
......@@ -80,7 +64,7 @@ int get_irte(int irq, struct irte *entry)
return 0;
}
int alloc_irte(struct intel_iommu *iommu, int irq, u16 count)
static int alloc_irte(struct intel_iommu *iommu, int irq, u16 count)
{
struct ir_table *table = iommu->ir_table;
struct irq_2_iommu *irq_iommu = irq_2_iommu(irq);
......@@ -152,7 +136,7 @@ static int qi_flush_iec(struct intel_iommu *iommu, int index, int mask)
return qi_submit_sync(&desc, iommu);
}
int map_irq_to_irte_handle(int irq, u16 *sub_handle)
static int map_irq_to_irte_handle(int irq, u16 *sub_handle)
{
struct irq_2_iommu *irq_iommu = irq_2_iommu(irq);
unsigned long flags;
......@@ -168,7 +152,7 @@ int map_irq_to_irte_handle(int irq, u16 *sub_handle)
return index;
}
int set_irte_irq(int irq, struct intel_iommu *iommu, u16 index, u16 subhandle)
static int set_irte_irq(int irq, struct intel_iommu *iommu, u16 index, u16 subhandle)
{
struct irq_2_iommu *irq_iommu = irq_2_iommu(irq);
unsigned long flags;
......@@ -188,7 +172,7 @@ int set_irte_irq(int irq, struct intel_iommu *iommu, u16 index, u16 subhandle)
return 0;
}
int modify_irte(int irq, struct irte *irte_modified)
static int modify_irte(int irq, struct irte *irte_modified)
{
struct irq_2_iommu *irq_iommu = irq_2_iommu(irq);
struct intel_iommu *iommu;
......@@ -216,7 +200,7 @@ int modify_irte(int irq, struct irte *irte_modified)
return rc;
}
struct intel_iommu *map_hpet_to_ir(u8 hpet_id)
static struct intel_iommu *map_hpet_to_ir(u8 hpet_id)
{
int i;
......@@ -226,7 +210,7 @@ struct intel_iommu *map_hpet_to_ir(u8 hpet_id)
return NULL;
}
struct intel_iommu *map_ioapic_to_ir(int apic)
static struct intel_iommu *map_ioapic_to_ir(int apic)
{
int i;
......@@ -236,7 +220,7 @@ struct intel_iommu *map_ioapic_to_ir(int apic)
return NULL;
}
struct intel_iommu *map_dev_to_ir(struct pci_dev *dev)
static struct intel_iommu *map_dev_to_ir(struct pci_dev *dev)
{
struct dmar_drhd_unit *drhd;
......@@ -270,7 +254,7 @@ static int clear_entries(struct irq_2_iommu *irq_iommu)
return qi_flush_iec(iommu, index, irq_iommu->irte_mask);
}
int free_irte(int irq)
static int free_irte(int irq)
{
struct irq_2_iommu *irq_iommu = irq_2_iommu(irq);
unsigned long flags;
......@@ -328,7 +312,7 @@ static void set_irte_sid(struct irte *irte, unsigned int svt,
irte->sid = sid;
}
int set_ioapic_sid(struct irte *irte, int apic)
static int set_ioapic_sid(struct irte *irte, int apic)
{
int i;
u16 sid = 0;
......@@ -353,7 +337,7 @@ int set_ioapic_sid(struct irte *irte, int apic)
return 0;
}
int set_hpet_sid(struct irte *irte, u8 id)
static int set_hpet_sid(struct irte *irte, u8 id)
{
int i;
u16 sid = 0;
......@@ -383,7 +367,7 @@ int set_hpet_sid(struct irte *irte, u8 id)
return 0;
}
int set_msi_sid(struct irte *irte, struct pci_dev *dev)
static int set_msi_sid(struct irte *irte, struct pci_dev *dev)
{
struct pci_dev *bridge;
......@@ -410,7 +394,7 @@ int set_msi_sid(struct irte *irte, struct pci_dev *dev)
return 0;
}
static void iommu_set_intr_remapping(struct intel_iommu *iommu, int mode)
static void iommu_set_irq_remapping(struct intel_iommu *iommu, int mode)
{
u64 addr;
u32 sts;
......@@ -450,7 +434,7 @@ static void iommu_set_intr_remapping(struct intel_iommu *iommu, int mode)
}
static int setup_intr_remapping(struct intel_iommu *iommu, int mode)
static int intel_setup_irq_remapping(struct intel_iommu *iommu, int mode)
{
struct ir_table *ir_table;
struct page *pages;
......@@ -473,14 +457,14 @@ static int setup_intr_remapping(struct intel_iommu *iommu, int mode)
ir_table->base = page_address(pages);
iommu_set_intr_remapping(iommu, mode);
iommu_set_irq_remapping(iommu, mode);
return 0;
}
/*
* Disable Interrupt Remapping.
*/
static void iommu_disable_intr_remapping(struct intel_iommu *iommu)
static void iommu_disable_irq_remapping(struct intel_iommu *iommu)
{
unsigned long flags;
u32 sts;
......@@ -519,11 +503,11 @@ static int __init dmar_x2apic_optout(void)
return dmar->flags & DMAR_X2APIC_OPT_OUT;
}
int __init intr_remapping_supported(void)
static int __init intel_irq_remapping_supported(void)
{
struct dmar_drhd_unit *drhd;
if (disable_intremap)
if (disable_irq_remap)
return 0;
if (!dmar_ir_support())
......@@ -539,7 +523,7 @@ int __init intr_remapping_supported(void)
return 1;
}
int __init enable_intr_remapping(void)
static int __init intel_enable_irq_remapping(void)
{
struct dmar_drhd_unit *drhd;
int setup = 0;
......@@ -577,7 +561,7 @@ int __init enable_intr_remapping(void)
* Disable intr remapping and queued invalidation, if already
* enabled prior to OS handover.
*/
iommu_disable_intr_remapping(iommu);
iommu_disable_irq_remapping(iommu);
dmar_disable_qi(iommu);
}
......@@ -623,7 +607,7 @@ int __init enable_intr_remapping(void)
if (!ecap_ir_support(iommu->ecap))
continue;
if (setup_intr_remapping(iommu, eim))
if (intel_setup_irq_remapping(iommu, eim))
goto error;
setup = 1;
......@@ -632,7 +616,7 @@ int __init enable_intr_remapping(void)
if (!setup)
goto error;
intr_remapping_enabled = 1;
irq_remapping_enabled = 1;
pr_info("Enabled IRQ remapping in %s mode\n", eim ? "x2apic" : "xapic");
return eim ? IRQ_REMAP_X2APIC_MODE : IRQ_REMAP_XAPIC_MODE;
......@@ -775,14 +759,14 @@ int __init parse_ioapics_under_ir(void)
int __init ir_dev_scope_init(void)
{
if (!intr_remapping_enabled)
if (!irq_remapping_enabled)
return 0;
return dmar_dev_scope_init();
}
rootfs_initcall(ir_dev_scope_init);
void disable_intr_remapping(void)
static void disable_irq_remapping(void)
{
struct dmar_drhd_unit *drhd;
struct intel_iommu *iommu = NULL;
......@@ -794,11 +778,11 @@ void disable_intr_remapping(void)
if (!ecap_ir_support(iommu->ecap))
continue;
iommu_disable_intr_remapping(iommu);
iommu_disable_irq_remapping(iommu);
}
}
int reenable_intr_remapping(int eim)
static int reenable_irq_remapping(int eim)
{
struct dmar_drhd_unit *drhd;
int setup = 0;
......@@ -816,7 +800,7 @@ int reenable_intr_remapping(int eim)
continue;
/* Set up interrupt remapping for iommu.*/
iommu_set_intr_remapping(iommu, eim);
iommu_set_irq_remapping(iommu, eim);
setup = 1;
}
......@@ -832,3 +816,254 @@ int reenable_intr_remapping(int eim)
return -1;
}
static void prepare_irte(struct irte *irte, int vector,
unsigned int dest)
{
memset(irte, 0, sizeof(*irte));
irte->present = 1;
irte->dst_mode = apic->irq_dest_mode;
/*
* Trigger mode in the IRTE will always be edge, and for IO-APIC, the
* actual level or edge trigger will be setup in the IO-APIC
* RTE. This will help simplify level triggered irq migration.
* For more details, see the comments (in io_apic.c) explainig IO-APIC
* irq migration in the presence of interrupt-remapping.
*/
irte->trigger_mode = 0;
irte->dlvry_mode = apic->irq_delivery_mode;
irte->vector = vector;
irte->dest_id = IRTE_DEST(dest);
irte->redir_hint = 1;
}
static int intel_setup_ioapic_entry(int irq,
struct IO_APIC_route_entry *route_entry,
unsigned int destination, int vector,
struct io_apic_irq_attr *attr)
{
int ioapic_id = mpc_ioapic_id(attr->ioapic);
struct intel_iommu *iommu = map_ioapic_to_ir(ioapic_id);
struct IR_IO_APIC_route_entry *entry;
struct irte irte;
int index;
if (!iommu) {
pr_warn("No mapping iommu for ioapic %d\n", ioapic_id);
return -ENODEV;
}
entry = (struct IR_IO_APIC_route_entry *)route_entry;
index = alloc_irte(iommu, irq, 1);
if (index < 0) {
pr_warn("Failed to allocate IRTE for ioapic %d\n", ioapic_id);
return -ENOMEM;
}
prepare_irte(&irte, vector, destination);
/* Set source-id of interrupt request */
set_ioapic_sid(&irte, ioapic_id);
modify_irte(irq, &irte);
apic_printk(APIC_VERBOSE, KERN_DEBUG "IOAPIC[%d]: "
"Set IRTE entry (P:%d FPD:%d Dst_Mode:%d "
"Redir_hint:%d Trig_Mode:%d Dlvry_Mode:%X "
"Avail:%X Vector:%02X Dest:%08X "
"SID:%04X SQ:%X SVT:%X)\n",
attr->ioapic, irte.present, irte.fpd, irte.dst_mode,
irte.redir_hint, irte.trigger_mode, irte.dlvry_mode,
irte.avail, irte.vector, irte.dest_id,
irte.sid, irte.sq, irte.svt);
memset(entry, 0, sizeof(*entry));
entry->index2 = (index >> 15) & 0x1;
entry->zero = 0;
entry->format = 1;
entry->index = (index & 0x7fff);
/*
* IO-APIC RTE will be configured with virtual vector.
* irq handler will do the explicit EOI to the io-apic.
*/
entry->vector = attr->ioapic_pin;
entry->mask = 0; /* enable IRQ */
entry->trigger = attr->trigger;
entry->polarity = attr->polarity;
/* Mask level triggered irqs.
* Use IRQ_DELAYED_DISABLE for edge triggered irqs.
*/
if (attr->trigger)
entry->mask = 1;
return 0;
}
#ifdef CONFIG_SMP
/*
* Migrate the IO-APIC irq in the presence of intr-remapping.
*
* For both level and edge triggered, irq migration is a simple atomic
* update(of vector and cpu destination) of IRTE and flush the hardware cache.
*
* For level triggered, we eliminate the io-apic RTE modification (with the
* updated vector information), by using a virtual vector (io-apic pin number).
* Real vector that is used for interrupting cpu will be coming from
* the interrupt-remapping table entry.
*
* As the migration is a simple atomic update of IRTE, the same mechanism
* is used to migrate MSI irq's in the presence of interrupt-remapping.
*/
static int
intel_ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask,
bool force)
{
struct irq_cfg *cfg = data->chip_data;
unsigned int dest, irq = data->irq;
struct irte irte;
if (!cpumask_intersects(mask, cpu_online_mask))
return -EINVAL;
if (get_irte(irq, &irte))
return -EBUSY;
if (assign_irq_vector(irq, cfg, mask))
return -EBUSY;
dest = apic->cpu_mask_to_apicid_and(cfg->domain, mask);
irte.vector = cfg->vector;
irte.dest_id = IRTE_DEST(dest);
/*
* Atomically updates the IRTE with the new destination, vector
* and flushes the interrupt entry cache.
*/
modify_irte(irq, &irte);
/*
* After this point, all the interrupts will start arriving
* at the new destination. So, time to cleanup the previous
* vector allocation.
*/
if (cfg->move_in_progress)
send_cleanup_vector(cfg);
cpumask_copy(data->affinity, mask);
return 0;
}
#endif
static void intel_compose_msi_msg(struct pci_dev *pdev,
unsigned int irq, unsigned int dest,
struct msi_msg *msg, u8 hpet_id)
{
struct irq_cfg *cfg;
struct irte irte;
u16 sub_handle = 0;
int ir_index;
cfg = irq_get_chip_data(irq);
ir_index = map_irq_to_irte_handle(irq, &sub_handle);
BUG_ON(ir_index == -1);
prepare_irte(&irte, cfg->vector, dest);
/* Set source-id of interrupt request */
if (pdev)
set_msi_sid(&irte, pdev);
else
set_hpet_sid(&irte, hpet_id);
modify_irte(irq, &irte);
msg->address_hi = MSI_ADDR_BASE_HI;
msg->data = sub_handle;
msg->address_lo = MSI_ADDR_BASE_LO | MSI_ADDR_IR_EXT_INT |
MSI_ADDR_IR_SHV |
MSI_ADDR_IR_INDEX1(ir_index) |
MSI_ADDR_IR_INDEX2(ir_index);
}
/*
* Map the PCI dev to the corresponding remapping hardware unit
* and allocate 'nvec' consecutive interrupt-remapping table entries
* in it.
*/
static int intel_msi_alloc_irq(struct pci_dev *dev, int irq, int nvec)
{
struct intel_iommu *iommu;
int index;
iommu = map_dev_to_ir(dev);
if (!iommu) {
printk(KERN_ERR
"Unable to map PCI %s to iommu\n", pci_name(dev));
return -ENOENT;
}
index = alloc_irte(iommu, irq, nvec);
if (index < 0) {
printk(KERN_ERR
"Unable to allocate %d IRTE for PCI %s\n", nvec,
pci_name(dev));
return -ENOSPC;
}
return index;
}
static int intel_msi_setup_irq(struct pci_dev *pdev, unsigned int irq,
int index, int sub_handle)
{
struct intel_iommu *iommu;
iommu = map_dev_to_ir(pdev);
if (!iommu)
return -ENOENT;
/*
* setup the mapping between the irq and the IRTE
* base index, the sub_handle pointing to the
* appropriate interrupt remap table entry.
*/
set_irte_irq(irq, iommu, index, sub_handle);
return 0;
}
static int intel_setup_hpet_msi(unsigned int irq, unsigned int id)
{
struct intel_iommu *iommu = map_hpet_to_ir(id);
int index;
if (!iommu)
return -1;
index = alloc_irte(iommu, irq, 1);
if (index < 0)
return -1;
return 0;
}
struct irq_remap_ops intel_irq_remap_ops = {
.supported = intel_irq_remapping_supported,
.prepare = dmar_table_init,
.enable = intel_enable_irq_remapping,
.disable = disable_irq_remapping,
.reenable = reenable_irq_remapping,
.enable_faulting = enable_drhd_fault_handling,
.setup_ioapic_entry = intel_setup_ioapic_entry,
#ifdef CONFIG_SMP
.set_affinity = intel_ioapic_set_affinity,
#endif
.free_irq = free_irte,
.compose_msi_msg = intel_compose_msi_msg,
.msi_alloc_irq = intel_msi_alloc_irq,
.msi_setup_irq = intel_msi_setup_irq,
.setup_hpet_msi = intel_setup_hpet_msi,
};
#include <linux/intel-iommu.h>
struct ioapic_scope {
struct intel_iommu *iommu;
unsigned int id;
unsigned int bus; /* PCI bus number */
unsigned int devfn; /* PCI devfn number */
};
struct hpet_scope {
struct intel_iommu *iommu;
u8 id;
unsigned int bus;
unsigned int devfn;
};
#define IR_X2APIC_MODE(mode) (mode ? (1 << 11) : 0)
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
#include "irq_remapping.h"
int irq_remapping_enabled;
int disable_irq_remap;
int disable_sourceid_checking;
int no_x2apic_optout;
static struct irq_remap_ops *remap_ops;
static __init int setup_nointremap(char *str)
{
disable_irq_remap = 1;
return 0;
}
early_param("nointremap", setup_nointremap);
static __init int setup_irqremap(char *str)
{
if (!str)
return -EINVAL;
while (*str) {
if (!strncmp(str, "on", 2))
disable_irq_remap = 0;
else if (!strncmp(str, "off", 3))
disable_irq_remap = 1;
else if (!strncmp(str, "nosid", 5))
disable_sourceid_checking = 1;
else if (!strncmp(str, "no_x2apic_optout", 16))
no_x2apic_optout = 1;
str += strcspn(str, ",");
while (*str == ',')
str++;
}
return 0;
}
early_param("intremap", setup_irqremap);
void __init setup_irq_remapping_ops(void)
{
remap_ops = &intel_irq_remap_ops;
}
int irq_remapping_supported(void)
{
if (disable_irq_remap)
return 0;
if (!remap_ops || !remap_ops->supported)
return 0;
return remap_ops->supported();
}
int __init irq_remapping_prepare(void)
{
if (!remap_ops || !remap_ops->prepare)
return -ENODEV;
return remap_ops->prepare();
}
int __init irq_remapping_enable(void)
{
if (!remap_ops || !remap_ops->enable)
return -ENODEV;
return remap_ops->enable();
}
void irq_remapping_disable(void)
{
if (!remap_ops || !remap_ops->disable)
return;
remap_ops->disable();
}
int irq_remapping_reenable(int mode)
{
if (!remap_ops || !remap_ops->reenable)
return 0;
return remap_ops->reenable(mode);
}
int __init irq_remap_enable_fault_handling(void)
{
if (!remap_ops || !remap_ops->enable_faulting)
return -ENODEV;
return remap_ops->enable_faulting();
}
int setup_ioapic_remapped_entry(int irq,
struct IO_APIC_route_entry *entry,
unsigned int destination, int vector,
struct io_apic_irq_attr *attr)
{
if (!remap_ops || !remap_ops->setup_ioapic_entry)
return -ENODEV;
return remap_ops->setup_ioapic_entry(irq, entry, destination,
vector, attr);
}
#ifdef CONFIG_SMP
int set_remapped_irq_affinity(struct irq_data *data, const struct cpumask *mask,
bool force)
{
if (!remap_ops || !remap_ops->set_affinity)
return 0;
return remap_ops->set_affinity(data, mask, force);
}
#endif
void free_remapped_irq(int irq)
{
if (!remap_ops || !remap_ops->free_irq)
return;
remap_ops->free_irq(irq);
}
void compose_remapped_msi_msg(struct pci_dev *pdev,
unsigned int irq, unsigned int dest,
struct msi_msg *msg, u8 hpet_id)
{
if (!remap_ops || !remap_ops->compose_msi_msg)
return;
remap_ops->compose_msi_msg(pdev, irq, dest, msg, hpet_id);
}
int msi_alloc_remapped_irq(struct pci_dev *pdev, int irq, int nvec)
{
if (!remap_ops || !remap_ops->msi_alloc_irq)
return -ENODEV;
return remap_ops->msi_alloc_irq(pdev, irq, nvec);
}
int msi_setup_remapped_irq(struct pci_dev *pdev, unsigned int irq,
int index, int sub_handle)
{
if (!remap_ops || !remap_ops->msi_setup_irq)
return -ENODEV;
return remap_ops->msi_setup_irq(pdev, irq, index, sub_handle);
}
int setup_hpet_msi_remapped(unsigned int irq, unsigned int id)
{
if (!remap_ops || !remap_ops->setup_hpet_msi)
return -ENODEV;
return remap_ops->setup_hpet_msi(irq, id);
}
/*
* Copyright (C) 2012 Advanced Micro Devices, Inc.
* Author: Joerg Roedel <joerg.roedel@amd.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* This header file contains stuff that is shared between different interrupt
* remapping drivers but with no need to be visible outside of the IOMMU layer.
*/
#ifndef __IRQ_REMAPPING_H
#define __IRQ_REMAPPING_H
#ifdef CONFIG_IRQ_REMAP
struct IO_APIC_route_entry;
struct io_apic_irq_attr;
struct irq_data;
struct cpumask;
struct pci_dev;
struct msi_msg;
extern int disable_irq_remap;
extern int disable_sourceid_checking;
extern int no_x2apic_optout;
struct irq_remap_ops {
/* Check whether Interrupt Remapping is supported */
int (*supported)(void);
/* Initializes hardware and makes it ready for remapping interrupts */
int (*prepare)(void);
/* Enables the remapping hardware */
int (*enable)(void);
/* Disables the remapping hardware */
void (*disable)(void);
/* Reenables the remapping hardware */
int (*reenable)(int);
/* Enable fault handling */
int (*enable_faulting)(void);
/* IO-APIC setup routine */
int (*setup_ioapic_entry)(int irq, struct IO_APIC_route_entry *,
unsigned int, int,
struct io_apic_irq_attr *);
#ifdef CONFIG_SMP
/* Set the CPU affinity of a remapped interrupt */
int (*set_affinity)(struct irq_data *data, const struct cpumask *mask,
bool force);
#endif
/* Free an IRQ */
int (*free_irq)(int);
/* Create MSI msg to use for interrupt remapping */
void (*compose_msi_msg)(struct pci_dev *,
unsigned int, unsigned int,
struct msi_msg *, u8);
/* Allocate remapping resources for MSI */
int (*msi_alloc_irq)(struct pci_dev *, int, int);
/* Setup the remapped MSI irq */
int (*msi_setup_irq)(struct pci_dev *, unsigned int, int, int);
/* Setup interrupt remapping for an HPET MSI */
int (*setup_hpet_msi)(unsigned int, unsigned int);
};
extern struct irq_remap_ops intel_irq_remap_ops;
#endif /* CONFIG_IRQ_REMAP */
#endif /* __IRQ_REMAPPING_H */
......@@ -114,91 +114,6 @@ struct irte {
};
};
#ifdef CONFIG_IRQ_REMAP
extern int intr_remapping_enabled;
extern int intr_remapping_supported(void);
extern int enable_intr_remapping(void);
extern void disable_intr_remapping(void);
extern int reenable_intr_remapping(int);
extern int get_irte(int irq, struct irte *entry);
extern int modify_irte(int irq, struct irte *irte_modified);
extern int alloc_irte(struct intel_iommu *iommu, int irq, u16 count);
extern int set_irte_irq(int irq, struct intel_iommu *iommu, u16 index,
u16 sub_handle);
extern int map_irq_to_irte_handle(int irq, u16 *sub_handle);
extern int free_irte(int irq);
extern struct intel_iommu *map_dev_to_ir(struct pci_dev *dev);
extern struct intel_iommu *map_ioapic_to_ir(int apic);
extern struct intel_iommu *map_hpet_to_ir(u8 id);
extern int set_ioapic_sid(struct irte *irte, int apic);
extern int set_hpet_sid(struct irte *irte, u8 id);
extern int set_msi_sid(struct irte *irte, struct pci_dev *dev);
#else
static inline int alloc_irte(struct intel_iommu *iommu, int irq, u16 count)
{
return -1;
}
static inline int modify_irte(int irq, struct irte *irte_modified)
{
return -1;
}
static inline int free_irte(int irq)
{
return -1;
}
static inline int map_irq_to_irte_handle(int irq, u16 *sub_handle)
{
return -1;
}
static inline int set_irte_irq(int irq, struct intel_iommu *iommu, u16 index,
u16 sub_handle)
{
return -1;
}
static inline struct intel_iommu *map_dev_to_ir(struct pci_dev *dev)
{
return NULL;
}
static inline struct intel_iommu *map_ioapic_to_ir(int apic)
{
return NULL;
}
static inline struct intel_iommu *map_hpet_to_ir(unsigned int hpet_id)
{
return NULL;
}
static inline int set_ioapic_sid(struct irte *irte, int apic)
{
return 0;
}
static inline int set_hpet_sid(struct irte *irte, u8 id)
{
return -1;
}
static inline int set_msi_sid(struct irte *irte, struct pci_dev *dev)
{
return 0;
}
#define intr_remapping_enabled (0)
static inline int enable_intr_remapping(void)
{
return -1;
}
static inline void disable_intr_remapping(void)
{
}
static inline int reenable_intr_remapping(int eim)
{
return 0;
}
#endif
enum {
IRQ_REMAP_XAPIC_MODE,
IRQ_REMAP_X2APIC_MODE,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册