Merge branch 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev

* 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (119 commits)
  [libata] struct pci_dev related cleanups
  libata: use ata_exec_internal() for PMP register access
  libata: implement ATA_PFLAG_RESETTING
  libata: add @timeout to ata_exec_internal[_sg]()
  ahci: fix notification handling
  ahci: clean up PORT_IRQ_BAD_PMP enabling
  ahci: kill leftover from enabling NCQ over PMP
  libata: wrap schedule_timeout_uninterruptible() in loop
  libata: skip suppress reporting if ATA_EHI_QUIET
  libata: clear ehi description after initial host report
  pata_jmicron: match vendor and class code only
  libata: add ST9160821AS / 3.ALD to NCQ blacklist
  pata_acpi: ACPI driver support
  libata-core: Expose gtm methods for driver use
  libata: add HDT722516DLA380 to NCQ blacklist
  libata: blacklist NCQ on Seagate Barracuda ST380817AS
  [libata] Turn on ACPI by default
  libata_scsi: Fix ATAPI transfer lengths
  libata: correct handling of SRST reset sequences
  libata: Integrate ACPI-based PATA/SATA hotplug - version 5
  ...

Documentation/kernel-parameters.txt

@@ -865,6 +865,10 @@ and is between 256 and 4096 characters. It is defined in the file
 	lasi=		[HW,SCSI] PARISC LASI driver for the 53c700 chip
 			Format: addr:<io>,irq:<irq>
 
+	libata.noacpi	[LIBATA] Disables use of ACPI in libata suspend/resume
+			when set.
+			Format: <int>
+
 	load_ramdisk=	[RAM] List of ramdisks to load from floppy
 			See Documentation/ramdisk.txt.
 
@@ -1085,10 +1089,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			emulation library even if a 387 maths coprocessor
 			is present.
 
-	noacpi		[LIBATA] Disables use of ACPI in libata suspend/resume
-			when set.
-			Format: <int>
-
 	noaliencache	[MM, NUMA, SLAB] Disables the allocation of alien
 			caches in the slab allocator.  Saves per-node memory,
 			but will impact performance.

drivers/ata/Kconfig

@@ -173,6 +173,15 @@ config SATA_INIC162X
 	help
 	  This option enables support for Initio 162x Serial ATA.
 
+config PATA_ACPI
+	tristate "ACPI firmware driver for PATA"
+	depends on ATA_ACPI
+	help
+	  This option enables an ACPI method driver which drives
+	  motherboard PATA controller interfaces through the ACPI
+	  firmware in the BIOS. This driver can sometimes handle
+	  otherwise unsupported hardware.
+
 config PATA_ALI
 	tristate "ALi PATA support (Experimental)"
 	depends on PCI && EXPERIMENTAL
@@ -192,16 +201,25 @@ config PATA_AMD
 	  If unsure, say N.
 
 config PATA_ARTOP
-	tristate "ARTOP 6210/6260 PATA support (Experimental)"
-	depends on PCI && EXPERIMENTAL
+	tristate "ARTOP 6210/6260 PATA support"
+	depends on PCI
 	help
 	  This option enables support for ARTOP PATA controllers.
 
 	  If unsure, say N.
 
+config PATA_AT32
+	tristate "Atmel AVR32 PATA support (Experimental)"
+	depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL
+	help
+	  This option enables support for the IDE devices on the
+	  Atmel AT32AP platform.
+
+	  If unsure, say N.
+
 config PATA_ATIIXP
-	tristate "ATI PATA support (Experimental)"
-	depends on PCI && EXPERIMENTAL
+	tristate "ATI PATA support"
+	depends on PCI
 	help
 	  This option enables support for the ATI ATA interfaces
 	  found on the many ATI chipsets.
@@ -219,8 +237,8 @@ config PATA_CMD640_PCI
 	  If unsure, say N.
 
 config PATA_CMD64X
-	tristate "CMD64x PATA support (Very Experimental)"
-	depends on PCI&& EXPERIMENTAL
+	tristate "CMD64x PATA support"
+	depends on PCI
 	help
 	  This option enables support for the CMD64x series chips
 	  except for the CMD640.
@@ -282,8 +300,8 @@ config ATA_GENERIC
 	  If unsure, say N.
 
 config PATA_HPT366
-	tristate "HPT 366/368 PATA support (Experimental)"
-	depends on PCI && EXPERIMENTAL
+	tristate "HPT 366/368 PATA support"
+	depends on PCI
 	help
 	  This option enables support for the HPT 366 and 368
 	  PATA controllers via the new ATA layer.
@@ -432,6 +450,15 @@ config PATA_NS87410
 
 	  If unsure, say N.
 
+config PATA_NS87415
+	tristate "Nat Semi NS87415 PATA support (Experimental)"
+	depends on PCI && EXPERIMENTAL
+	help
+	  This option enables support for the National Semiconductor
+	  NS87415 PCI-IDE controller.
+
+	  If unsure, say N.
+
 config PATA_OPTI
 	tristate "OPTI621/6215 PATA support (Very Experimental)"
 	depends on PCI && EXPERIMENTAL
@@ -596,4 +623,20 @@ config PATA_SCC
 
 	  If unsure, say N.
 
+config PATA_BF54X
+	tristate "Blackfin 54x ATAPI support"
+	depends on BF542 || BF548 || BF549
+	help
+	  This option enables support for the built-in ATAPI controller on
+	  Blackfin 54x family chips.
+
+	  If unsure, say N.
+
+config PATA_BF54X_DMA
+	bool "DMA mode"
+	depends on PATA_BF54X
+	default y
+	help
+	  Enable DMA mode for Blackfin ATAPI controller.
+
 endif # ATA

drivers/ata/Makefile

@@ -21,6 +21,7 @@ obj-$(CONFIG_PDC_ADMA)		+= pdc_adma.o
 obj-$(CONFIG_PATA_ALI)		+= pata_ali.o
 obj-$(CONFIG_PATA_AMD)		+= pata_amd.o
 obj-$(CONFIG_PATA_ARTOP)	+= pata_artop.o
+obj-$(CONFIG_PATA_AT32)		+= pata_at32.o
 obj-$(CONFIG_PATA_ATIIXP)	+= pata_atiixp.o
 obj-$(CONFIG_PATA_CMD640_PCI)	+= pata_cmd640.o
 obj-$(CONFIG_PATA_CMD64X)	+= pata_cmd64x.o
@@ -39,6 +40,7 @@ obj-$(CONFIG_PATA_IT8213)	+= pata_it8213.o
 obj-$(CONFIG_PATA_JMICRON)	+= pata_jmicron.o
 obj-$(CONFIG_PATA_NETCELL)	+= pata_netcell.o
 obj-$(CONFIG_PATA_NS87410)	+= pata_ns87410.o
+obj-$(CONFIG_PATA_NS87415)	+= pata_ns87415.o
 obj-$(CONFIG_PATA_OPTI)		+= pata_opti.o
 obj-$(CONFIG_PATA_OPTIDMA)	+= pata_optidma.o
 obj-$(CONFIG_PATA_MPC52xx)	+= pata_mpc52xx.o
@@ -61,12 +63,16 @@ obj-$(CONFIG_PATA_SIS)		+= pata_sis.o
 obj-$(CONFIG_PATA_TRIFLEX)	+= pata_triflex.o
 obj-$(CONFIG_PATA_IXP4XX_CF)	+= pata_ixp4xx_cf.o
 obj-$(CONFIG_PATA_SCC)		+= pata_scc.o
+obj-$(CONFIG_PATA_BF54X)	+= pata_bf54x.o
 obj-$(CONFIG_PATA_PLATFORM)	+= pata_platform.o
 obj-$(CONFIG_PATA_ICSIDE)	+= pata_icside.o
+# Should be last but two libata driver
+obj-$(CONFIG_PATA_ACPI)		+= pata_acpi.o
 # Should be last but one libata driver
 obj-$(CONFIG_ATA_GENERIC)	+= ata_generic.o
 # Should be last libata driver
 obj-$(CONFIG_PATA_LEGACY)	+= pata_legacy.o
 
-libata-objs	:= libata-core.o libata-scsi.o libata-sff.o libata-eh.o
+libata-objs	:= libata-core.o libata-scsi.o libata-sff.o libata-eh.o \
+		   libata-pmp.o
 libata-$(CONFIG_ATA_ACPI)	+= libata-acpi.o

drivers/ata/ata_generic.c

@@ -34,7 +34,7 @@
 
 /**
  *	generic_set_mode	-	mode setting
- *	@ap: interface to set up
+ *	@link: link to set up
  *	@unused: returned device on error
  *
  *	Use a non standard set_mode function. We don't want to be tuned.
@@ -43,24 +43,24 @@
  *	and respect them.
  */
 
-static int generic_set_mode(struct ata_port *ap, struct ata_device **unused)
+static int generic_set_mode(struct ata_link *link, struct ata_device **unused)
 {
+	struct ata_port *ap = link->ap;
 	int dma_enabled = 0;
-	int i;
+	struct ata_device *dev;
 
 	/* Bits 5 and 6 indicate if DMA is active on master/slave */
 	if (ap->ioaddr.bmdma_addr)
 		dma_enabled = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
 
-	for (i = 0; i < ATA_MAX_DEVICES; i++) {
-		struct ata_device *dev = &ap->device[i];
+	ata_link_for_each_dev(dev, link) {
 		if (ata_dev_enabled(dev)) {
 			/* We don't really care */
 			dev->pio_mode = XFER_PIO_0;
 			dev->dma_mode = XFER_MW_DMA_0;
 			/* We do need the right mode information for DMA or PIO
 			   and this comes from the current configuration flags */
-			if (dma_enabled & (1 << (5 + i))) {
+			if (dma_enabled & (1 << (5 + dev->devno))) {
 				ata_id_to_dma_mode(dev, XFER_MW_DMA_0);
 				dev->flags &= ~ATA_DFLAG_PIO;
 			} else {
@@ -95,7 +95,6 @@ static struct scsi_host_template generic_sht = {
 static struct ata_port_operations generic_port_ops = {
 	.set_mode	= generic_set_mode,
 
-	.port_disable	= ata_port_disable,
 	.tf_load	= ata_tf_load,
 	.tf_read	= ata_tf_read,
 	.check_status 	= ata_check_status,
@@ -121,9 +120,8 @@ static struct ata_port_operations generic_port_ops = {
 	.irq_handler	= ata_interrupt,
 	.irq_clear	= ata_bmdma_irq_clear,
 	.irq_on		= ata_irq_on,
-	.irq_ack	= ata_irq_ack,
 
-	.port_start	= ata_port_start,
+	.port_start	= ata_sff_port_start,
 };
 
 static int all_generic_ide;		/* Set to claim all devices */

drivers/ata/ata_piix.c

@@ -123,7 +123,6 @@ enum {
 	ich_pata_33		= 1,	/* ICH up to UDMA 33 only */
 	ich_pata_66		= 2,	/* ICH up to 66 Mhz */
 	ich_pata_100		= 3,	/* ICH up to UDMA 100 */
-	ich_pata_133		= 4,	/* ICH up to UDMA 133 */
 	ich5_sata		= 5,
 	ich6_sata		= 6,
 	ich6_sata_ahci		= 7,
@@ -199,7 +198,7 @@ static const struct pci_device_id piix_pci_tbl[] = {
 	{ 0x8086, 0x24CA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
 	{ 0x8086, 0x24CB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
 	/* Intel ICH5 */
-	{ 0x8086, 0x24DB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_133 },
+	{ 0x8086, 0x24DB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
 	/* C-ICH (i810E2) */
 	{ 0x8086, 0x245B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
 	/* ESB (855GME/875P + 6300ESB) UDMA 100  */
@@ -207,7 +206,7 @@ static const struct pci_device_id piix_pci_tbl[] = {
 	/* ICH6 (and 6) (i915) UDMA 100 */
 	{ 0x8086, 0x266F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
 	/* ICH7/7-R (i945, i975) UDMA 100*/
-	{ 0x8086, 0x27DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_133 },
+	{ 0x8086, 0x27DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
 	{ 0x8086, 0x269E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
 	/* ICH8 Mobile PATA Controller */
 	{ 0x8086, 0x2850, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
@@ -290,7 +289,6 @@ static struct scsi_host_template piix_sht = {
 };
 
 static const struct ata_port_operations piix_pata_ops = {
-	.port_disable		= ata_port_disable,
 	.set_piomode		= piix_set_piomode,
 	.set_dmamode		= piix_set_dmamode,
 	.mode_filter		= ata_pci_default_filter,
@@ -318,13 +316,11 @@ static const struct ata_port_operations piix_pata_ops = {
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
-	.irq_ack		= ata_irq_ack,
 
 	.port_start		= ata_port_start,
 };
 
 static const struct ata_port_operations ich_pata_ops = {
-	.port_disable		= ata_port_disable,
 	.set_piomode		= piix_set_piomode,
 	.set_dmamode		= ich_set_dmamode,
 	.mode_filter		= ata_pci_default_filter,
@@ -352,14 +348,11 @@ static const struct ata_port_operations ich_pata_ops = {
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
-	.irq_ack		= ata_irq_ack,
 
 	.port_start		= ata_port_start,
 };
 
 static const struct ata_port_operations piix_sata_ops = {
-	.port_disable		= ata_port_disable,
-
 	.tf_load		= ata_tf_load,
 	.tf_read		= ata_tf_read,
 	.check_status		= ata_check_status,
@@ -382,7 +375,6 @@ static const struct ata_port_operations piix_sata_ops = {
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
-	.irq_ack		= ata_irq_ack,
 
 	.port_start		= ata_port_start,
 };
@@ -466,7 +458,7 @@ static const struct piix_map_db *piix_map_db_table[] = {
 };
 
 static struct ata_port_info piix_port_info[] = {
-	/* piix_pata_33: 0:  PIIX4 at 33MHz */
+	[piix_pata_33] =	/* PIIX4 at 33MHz */
 	{
 		.sht		= &piix_sht,
 		.flags		= PIIX_PATA_FLAGS,
@@ -476,7 +468,7 @@ static struct ata_port_info piix_port_info[] = {
 		.port_ops	= &piix_pata_ops,
 	},
 
-	/* ich_pata_33: 1 	ICH0 - ICH at 33Mhz*/
+	[ich_pata_33] = 	/* ICH0 - ICH at 33Mhz*/
 	{
 		.sht		= &piix_sht,
 		.flags		= PIIX_PATA_FLAGS,
@@ -485,7 +477,8 @@ static struct ata_port_info piix_port_info[] = {
 		.udma_mask	= ATA_UDMA2, /* UDMA33 */
 		.port_ops	= &ich_pata_ops,
 	},
-	/* ich_pata_66: 2 	ICH controllers up to 66MHz */
+
+	[ich_pata_66] = 	/* ICH controllers up to 66MHz */
 	{
 		.sht		= &piix_sht,
 		.flags		= PIIX_PATA_FLAGS,
@@ -495,7 +488,7 @@ static struct ata_port_info piix_port_info[] = {
 		.port_ops	= &ich_pata_ops,
 	},
 
-	/* ich_pata_100: 3 */
+	[ich_pata_100] =
 	{
 		.sht		= &piix_sht,
 		.flags		= PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR,
@@ -505,17 +498,7 @@ static struct ata_port_info piix_port_info[] = {
 		.port_ops	= &ich_pata_ops,
 	},
 
-	/* ich_pata_133: 4 	ICH with full UDMA6 */
-	{
-		.sht		= &piix_sht,
-		.flags		= PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR,
-		.pio_mask 	= 0x1f,	/* pio 0-4 */
-		.mwdma_mask	= 0x06, /* Check: maybe 0x07  */
-		.udma_mask	= ATA_UDMA6, /* UDMA133 */
-		.port_ops	= &ich_pata_ops,
-	},
-
-	/* ich5_sata: 5 */
+	[ich5_sata] =
 	{
 		.sht		= &piix_sht,
 		.flags		= PIIX_SATA_FLAGS,
@@ -525,7 +508,7 @@ static struct ata_port_info piix_port_info[] = {
 		.port_ops	= &piix_sata_ops,
 	},
 
-	/* ich6_sata: 6 */
+	[ich6_sata] =
 	{
 		.sht		= &piix_sht,
 		.flags		= PIIX_SATA_FLAGS | PIIX_FLAG_SCR,
@@ -535,7 +518,7 @@ static struct ata_port_info piix_port_info[] = {
 		.port_ops	= &piix_sata_ops,
 	},
 
-	/* ich6_sata_ahci: 7 */
+	[ich6_sata_ahci] =
 	{
 		.sht		= &piix_sht,
 		.flags		= PIIX_SATA_FLAGS | PIIX_FLAG_SCR |
@@ -546,7 +529,7 @@ static struct ata_port_info piix_port_info[] = {
 		.port_ops	= &piix_sata_ops,
 	},
 
-	/* ich6m_sata_ahci: 8 */
+	[ich6m_sata_ahci] =
 	{
 		.sht		= &piix_sht,
 		.flags		= PIIX_SATA_FLAGS | PIIX_FLAG_SCR |
@@ -557,7 +540,7 @@ static struct ata_port_info piix_port_info[] = {
 		.port_ops	= &piix_sata_ops,
 	},
 
-	/* ich8_sata_ahci: 9 */
+	[ich8_sata_ahci] =
 	{
 		.sht		= &piix_sht,
 		.flags		= PIIX_SATA_FLAGS | PIIX_FLAG_SCR |
@@ -568,7 +551,7 @@ static struct ata_port_info piix_port_info[] = {
 		.port_ops	= &piix_sata_ops,
 	},
 
-	/* piix_pata_mwdma: 10:  PIIX3 MWDMA only */
+	[piix_pata_mwdma] = 	/* PIIX3 MWDMA only */
 	{
 		.sht		= &piix_sht,
 		.flags		= PIIX_PATA_FLAGS,
@@ -577,7 +560,7 @@ static struct ata_port_info piix_port_info[] = {
 		.port_ops	= &piix_pata_ops,
 	},
 
-	/* tolapai_sata_ahci: 11: */
+	[tolapai_sata_ahci] =
 	{
 		.sht		= &piix_sht,
 		.flags		= PIIX_SATA_FLAGS | PIIX_FLAG_SCR |
@@ -615,6 +598,7 @@ static const struct ich_laptop ich_laptop[] = {
 	{ 0x27DF, 0x0005, 0x0280 },	/* ICH7 on Acer 5602WLMi */
 	{ 0x27DF, 0x1025, 0x0110 },	/* ICH7 on Acer 3682WLMi */
 	{ 0x27DF, 0x1043, 0x1267 },	/* ICH7 on Asus W5F */
+	{ 0x27DF, 0x103C, 0x30A1 },	/* ICH7 on HP Compaq nc2400 */
 	{ 0x24CA, 0x1025, 0x0061 },	/* ICH4 on ACER Aspire 2023WLMi */
 	/* end marker */
 	{ 0, }
@@ -657,19 +641,20 @@ static int ich_pata_cable_detect(struct ata_port *ap)
 
 /**
  *	piix_pata_prereset - prereset for PATA host controller
- *	@ap: Target port
+ *	@link: Target link
  *	@deadline: deadline jiffies for the operation
  *
  *	LOCKING:
  *	None (inherited from caller).
  */
-static int piix_pata_prereset(struct ata_port *ap, unsigned long deadline)
+static int piix_pata_prereset(struct ata_link *link, unsigned long deadline)
 {
+	struct ata_port *ap = link->ap;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 
 	if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no]))
 		return -ENOENT;
-	return ata_std_prereset(ap, deadline);
+	return ata_std_prereset(link, deadline);
 }
 
 static void piix_pata_error_handler(struct ata_port *ap)

drivers/ata/libata-acpi.c

@@ -14,6 +14,7 @@
 #include <linux/acpi.h>
 #include <linux/libata.h>
 #include <linux/pci.h>
+#include <scsi/scsi_device.h>
 #include "libata.h"
 
 #include <acpi/acpi_bus.h>
@@ -40,11 +41,40 @@ static int is_pci_dev(struct device *dev)
 	return (dev->bus == &pci_bus_type);
 }
 
-static void ata_acpi_associate_sata_port(struct ata_port *ap)
+/**
+ * ata_acpi_associate_sata_port - associate SATA port with ACPI objects
+ * @ap: target SATA port
+ *
+ * Look up ACPI objects associated with @ap and initialize acpi_handle
+ * fields of @ap, the port and devices accordingly.
+ *
+ * LOCKING:
+ * EH context.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+void ata_acpi_associate_sata_port(struct ata_port *ap)
 {
+	WARN_ON(!(ap->flags & ATA_FLAG_ACPI_SATA));
+
+	if (!ap->nr_pmp_links) {
 		acpi_integer adr = SATA_ADR(ap->port_no, NO_PORT_MULT);
 
-	ap->device->acpi_handle = acpi_get_child(ap->host->acpi_handle, adr);
+		ap->link.device->acpi_handle =
+			acpi_get_child(ap->host->acpi_handle, adr);
+	} else {
+		struct ata_link *link;
+
+		ap->link.device->acpi_handle = NULL;
+
+		ata_port_for_each_link(link, ap) {
+			acpi_integer adr = SATA_ADR(ap->port_no, link->pmp);
+
+			link->device->acpi_handle =
+				acpi_get_child(ap->host->acpi_handle, adr);
+		}
+	}
 }
 
 static void ata_acpi_associate_ide_port(struct ata_port *ap)
@@ -60,12 +90,53 @@ static void ata_acpi_associate_ide_port(struct ata_port *ap)
 		max_devices++;
 
 	for (i = 0; i < max_devices; i++) {
-		struct ata_device *dev = &ap->device[i];
+		struct ata_device *dev = &ap->link.device[i];
 
 		dev->acpi_handle = acpi_get_child(ap->acpi_handle, i);
 	}
 }
 
+static void ata_acpi_handle_hotplug (struct ata_port *ap, struct kobject *kobj,
+				     u32 event)
+{
+	char event_string[12];
+	char *envp[] = { event_string, NULL };
+	struct ata_eh_info *ehi = &ap->link.eh_info;
+
+	if (event == 0 || event == 1) {
+	       unsigned long flags;
+	       spin_lock_irqsave(ap->lock, flags);
+	       ata_ehi_clear_desc(ehi);
+	       ata_ehi_push_desc(ehi, "ACPI event");
+	       ata_ehi_hotplugged(ehi);
+	       ata_port_freeze(ap);
+	       spin_unlock_irqrestore(ap->lock, flags);
+	}
+
+	if (kobj) {
+	        sprintf(event_string, "BAY_EVENT=%d", event);
+		kobject_uevent_env(kobj, KOBJ_CHANGE, envp);
+	}
+}
+
+static void ata_acpi_dev_notify(acpi_handle handle, u32 event, void *data)
+{
+	struct ata_device *dev = data;
+	struct kobject *kobj = NULL;
+
+	if (dev->sdev)
+		kobj = &dev->sdev->sdev_gendev.kobj;
+
+	ata_acpi_handle_hotplug (dev->link->ap, kobj, event);
+}
+
+static void ata_acpi_ap_notify(acpi_handle handle, u32 event, void *data)
+{
+	struct ata_port *ap = data;
+
+	ata_acpi_handle_hotplug (ap, &ap->dev->kobj, event);
+}
+
 /**
  * ata_acpi_associate - associate ATA host with ACPI objects
  * @host: target ATA host
@@ -81,7 +152,7 @@ static void ata_acpi_associate_ide_port(struct ata_port *ap)
  */
 void ata_acpi_associate(struct ata_host *host)
 {
-	int i;
+	int i, j;
 
 	if (!is_pci_dev(host->dev) || libata_noacpi)
 		return;
@@ -97,6 +168,22 @@ void ata_acpi_associate(struct ata_host *host)
 			ata_acpi_associate_sata_port(ap);
 		else
 			ata_acpi_associate_ide_port(ap);
+
+		if (ap->acpi_handle)
+			acpi_install_notify_handler (ap->acpi_handle,
+						     ACPI_SYSTEM_NOTIFY,
+						     ata_acpi_ap_notify,
+						     ap);
+
+		for (j = 0; j < ata_link_max_devices(&ap->link); j++) {
+			struct ata_device *dev = &ap->link.device[j];
+
+			if (dev->acpi_handle)
+				acpi_install_notify_handler (dev->acpi_handle,
+							     ACPI_SYSTEM_NOTIFY,
+							     ata_acpi_dev_notify,
+							     dev);
+		}
 	}
 }
 
@@ -113,7 +200,7 @@ void ata_acpi_associate(struct ata_host *host)
  * RETURNS:
  * 0 on success, -ENOENT if _GTM doesn't exist, -errno on failure.
  */
-static int ata_acpi_gtm(const struct ata_port *ap, struct ata_acpi_gtm *gtm)
+int ata_acpi_gtm(const struct ata_port *ap, struct ata_acpi_gtm *gtm)
 {
 	struct acpi_buffer output = { .length = ACPI_ALLOCATE_BUFFER };
 	union acpi_object *out_obj;
@@ -157,6 +244,8 @@ static int ata_acpi_gtm(const struct ata_port *ap, struct ata_acpi_gtm *gtm)
 	return rc;
 }
 
+EXPORT_SYMBOL_GPL(ata_acpi_gtm);
+
 /**
  * ata_acpi_stm - execute _STM
  * @ap: target ATA port
@@ -170,7 +259,7 @@ static int ata_acpi_gtm(const struct ata_port *ap, struct ata_acpi_gtm *gtm)
  * RETURNS:
  * 0 on success, -ENOENT if _STM doesn't exist, -errno on failure.
  */
-static int ata_acpi_stm(const struct ata_port *ap, struct ata_acpi_gtm *stm)
+int ata_acpi_stm(const struct ata_port *ap, struct ata_acpi_gtm *stm)
 {
 	acpi_status status;
 	struct acpi_object_list         input;
@@ -182,10 +271,10 @@ static int ata_acpi_stm(const struct ata_port *ap, struct ata_acpi_gtm *stm)
 	/* Buffers for id may need byteswapping ? */
 	in_params[1].type = ACPI_TYPE_BUFFER;
 	in_params[1].buffer.length = 512;
-	in_params[1].buffer.pointer = (u8 *)ap->device[0].id;
+	in_params[1].buffer.pointer = (u8 *)ap->link.device[0].id;
 	in_params[2].type = ACPI_TYPE_BUFFER;
 	in_params[2].buffer.length = 512;
-	in_params[2].buffer.pointer = (u8 *)ap->device[1].id;
+	in_params[2].buffer.pointer = (u8 *)ap->link.device[1].id;
 
 	input.count = 3;
 	input.pointer = in_params;
@@ -202,6 +291,8 @@ static int ata_acpi_stm(const struct ata_port *ap, struct ata_acpi_gtm *stm)
 	return 0;
 }
 
+EXPORT_SYMBOL_GPL(ata_acpi_stm);
+
 /**
  * ata_dev_get_GTF - get the drive bootup default taskfile settings
  * @dev: target ATA device
@@ -226,7 +317,7 @@ static int ata_acpi_stm(const struct ata_port *ap, struct ata_acpi_gtm *stm)
 static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf,
 			   void **ptr_to_free)
 {
-	struct ata_port *ap = dev->ap;
+	struct ata_port *ap = dev->link->ap;
 	acpi_status status;
 	struct acpi_buffer output;
 	union acpi_object *out_obj;
@@ -295,6 +386,44 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf,
 	return rc;
 }
 
+/**
+ * ata_acpi_cbl_80wire		-	Check for 80 wire cable
+ * @ap: Port to check
+ *
+ * Return 1 if the ACPI mode data for this port indicates the BIOS selected
+ * an 80wire mode.
+ */
+
+int ata_acpi_cbl_80wire(struct ata_port *ap)
+{
+	struct ata_acpi_gtm gtm;
+	int valid = 0;
+	
+	/* No _GTM data, no information */
+	if (ata_acpi_gtm(ap, &gtm) < 0)
+		return 0;
+		
+	/* Split timing, DMA enabled */
+	if ((gtm.flags & 0x11) == 0x11 && gtm.drive[0].dma < 55)
+		valid |= 1;
+	if ((gtm.flags & 0x14) == 0x14 && gtm.drive[1].dma < 55)
+		valid |= 2;
+	/* Shared timing, DMA enabled */
+	if ((gtm.flags & 0x11) == 0x01 && gtm.drive[0].dma < 55)
+		valid |= 1;
+	if ((gtm.flags & 0x14) == 0x04 && gtm.drive[0].dma < 55)
+		valid |= 2;
+
+	/* Drive check */
+	if ((valid & 1) && ata_dev_enabled(&ap->link.device[0]))
+		return 1;
+	if ((valid & 2) && ata_dev_enabled(&ap->link.device[1]))
+		return 1;
+	return 0;
+}
+
+EXPORT_SYMBOL_GPL(ata_acpi_cbl_80wire);
+
 /**
  * taskfile_load_raw - send taskfile registers to host controller
  * @dev: target ATA device
@@ -320,7 +449,7 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf,
 static int taskfile_load_raw(struct ata_device *dev,
 			      const struct ata_acpi_gtf *gtf)
 {
-	struct ata_port *ap = dev->ap;
+	struct ata_port *ap = dev->link->ap;
 	struct ata_taskfile tf, rtf;
 	unsigned int err_mask;
 
@@ -349,7 +478,7 @@ static int taskfile_load_raw(struct ata_device *dev,
 			       tf.lbal, tf.lbam, tf.lbah, tf.device);
 
 	rtf = tf;
-	err_mask = ata_exec_internal(dev, &rtf, NULL, DMA_NONE, NULL, 0);
+	err_mask = ata_exec_internal(dev, &rtf, NULL, DMA_NONE, NULL, 0, 0);
 	if (err_mask) {
 		ata_dev_printk(dev, KERN_ERR,
 			"ACPI cmd %02x/%02x:%02x:%02x:%02x:%02x:%02x failed "
@@ -424,7 +553,7 @@ static int ata_acpi_exec_tfs(struct ata_device *dev)
  */
 static int ata_acpi_push_id(struct ata_device *dev)
 {
-	struct ata_port *ap = dev->ap;
+	struct ata_port *ap = dev->link->ap;
 	int err;
 	acpi_status status;
 	struct acpi_object_list input;
@@ -508,7 +637,7 @@ int ata_acpi_on_suspend(struct ata_port *ap)
  */
 void ata_acpi_on_resume(struct ata_port *ap)
 {
-	int i;
+	struct ata_device *dev;
 
 	if (ap->acpi_handle && (ap->pflags & ATA_PFLAG_GTM_VALID)) {
 		BUG_ON(ap->flags & ATA_FLAG_ACPI_SATA);
@@ -518,8 +647,8 @@ void ata_acpi_on_resume(struct ata_port *ap)
 	}
 
 	/* schedule _GTF */
-	for (i = 0; i < ATA_MAX_DEVICES; i++)
-		ap->device[i].flags |= ATA_DFLAG_ACPI_PENDING;
+	ata_link_for_each_dev(dev, &ap->link)
+		dev->flags |= ATA_DFLAG_ACPI_PENDING;
 }
 
 /**
@@ -538,8 +667,8 @@ void ata_acpi_on_resume(struct ata_port *ap)
  */
 int ata_acpi_on_devcfg(struct ata_device *dev)
 {
-	struct ata_port *ap = dev->ap;
-	struct ata_eh_context *ehc = &ap->eh_context;
+	struct ata_port *ap = dev->link->ap;
+	struct ata_eh_context *ehc = &ap->link.eh_context;
 	int acpi_sata = ap->flags & ATA_FLAG_ACPI_SATA;
 	int rc;
 

drivers/ata/pata_atiixp.c

@@ -33,8 +33,9 @@ enum {
 	ATIIXP_IDE_UDMA_MODE 	= 0x56
 };
 
-static int atiixp_pre_reset(struct ata_port *ap, unsigned long deadline)
+static int atiixp_pre_reset(struct ata_link *link, unsigned long deadline)
 {
+	struct ata_port *ap = link->ap;
 	static const struct pci_bits atiixp_enable_bits[] = {
 		{ 0x48, 1, 0x01, 0x00 },
 		{ 0x48, 1, 0x08, 0x00 }
@@ -44,7 +45,7 @@ static int atiixp_pre_reset(struct ata_port *ap, unsigned long deadline)
 	if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no]))
 		return -ENOENT;
 
-	return ata_std_prereset(ap, deadline);
+	return ata_std_prereset(link, deadline);
 }
 
 static void atiixp_error_handler(struct ata_port *ap)
@@ -172,6 +173,9 @@ static void atiixp_set_dmamode(struct ata_port *ap, struct ata_device *adev)
  *
  *	When DMA begins we need to ensure that the UDMA control
  *	register for the channel is correctly set.
+ *
+ *	Note: The host lock held by the libata layer protects
+ *	us from two channels both trying to set DMA bits at once
  */
 
 static void atiixp_bmdma_start(struct ata_queued_cmd *qc)
@@ -198,6 +202,9 @@ static void atiixp_bmdma_start(struct ata_queued_cmd *qc)
  *
  *	DMA has completed. Clear the UDMA flag as the next operations will
  *	be PIO ones not UDMA data transfer.
+ *
+ *	Note: The host lock held by the libata layer protects
+ *	us from two channels both trying to set DMA bits at once
  */
 
 static void atiixp_bmdma_stop(struct ata_queued_cmd *qc)
@@ -232,7 +239,6 @@ static struct scsi_host_template atiixp_sht = {
 };
 
 static struct ata_port_operations atiixp_port_ops = {
-	.port_disable	= ata_port_disable,
 	.set_piomode	= atiixp_set_piomode,
 	.set_dmamode	= atiixp_set_dmamode,
 	.mode_filter	= ata_pci_default_filter,
@@ -261,9 +267,8 @@ static struct ata_port_operations atiixp_port_ops = {
 	.irq_handler	= ata_interrupt,
 	.irq_clear	= ata_bmdma_irq_clear,
 	.irq_on		= ata_irq_on,
-	.irq_ack	= ata_irq_ack,
 
-	.port_start	= ata_port_start,
+	.port_start	= ata_sff_port_start,
 };
 
 static int atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id)