diff --git a/Documentation/devicetree/bindings/mfd/max8925.txt b/Documentation/devicetree/bindings/mfd/max8925.txt new file mode 100644 index 0000000000000000000000000000000000000000..4f0dc6638e5e19abf2be5594dfb6361849a9f6b9 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/max8925.txt @@ -0,0 +1,64 @@ +* Maxim max8925 Power Management IC + +Required parent device properties: +- compatible : "maxim,max8925" +- reg : the I2C slave address for the max8925 chip +- interrupts : IRQ line for the max8925 chip +- interrupt-controller: describes the max8925 as an interrupt + controller (has its own domain) +- #interrupt-cells : should be 1. + - The cell is the max8925 local IRQ number + +Optional parent device properties: +- maxim,tsc-irq: there are 2 IRQ lines for max8925, one is indicated in + interrupts property, the other is indicated here. + +max8925 consists of a large and varied group of sub-devices: + +Device Supply Names Description +------ ------------ ----------- +max8925-onkey : : On key +max8925-rtc : : RTC +max8925-regulator : : Regulators +max8925-backlight : : Backlight +max8925-touch : : Touchscreen +max8925-power : : Charger + +Example: + + pmic: max8925@3c { + compatible = "maxim,max8925"; + reg = <0x3c>; + interrupts = <1>; + interrupt-parent = <&intcmux4>; + interrupt-controller; + #interrupt-cells = <1>; + maxim,tsc-irq = <0>; + + regulators { + SDV1 { + regulator-min-microvolt = <637500>; + regulator-max-microvolt = <1425000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO1 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + + }; + backlight { + maxim,max8925-dual-string = <0>; + }; + charger { + batt-detect = <0>; + topoff-threshold = <1>; + fast-charge = <7>; + no-temp-support = <0>; + no-insert-detect = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/power_supply/max8925_batter.txt b/Documentation/devicetree/bindings/power_supply/max8925_batter.txt new file mode 100644 index 0000000000000000000000000000000000000000..d7e3e0c0f71d8828e245af828360e6efc38122d9 --- /dev/null +++ b/Documentation/devicetree/bindings/power_supply/max8925_batter.txt @@ -0,0 +1,18 @@ +max8925-battery bindings +~~~~~~~~~~~~~~~~ + +Optional properties : + - batt-detect: whether support battery detect + - topoff-threshold: set charging current in topoff mode + - fast-charge: set charging current in fast mode + - no-temp-support: whether support temperature protection detect + - no-insert-detect: whether support insert detect + +Example: + charger { + batt-detect = <0>; + topoff-threshold = <1>; + fast-charge = <7>; + no-temp-support = <0>; + no-insert-detect = <0>; + }; diff --git a/Documentation/devicetree/bindings/regulator/tps65090.txt b/Documentation/devicetree/bindings/regulator/tps65090.txt new file mode 100644 index 0000000000000000000000000000000000000000..313a60ba61d8e61667bad2f627d738433f7854c8 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/tps65090.txt @@ -0,0 +1,122 @@ +TPS65090 regulators + +Required properties: +- compatible: "ti,tps65090" +- reg: I2C slave address +- interrupts: the interrupt outputs of the controller +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the node's name, with valid + values listed below. The content of each sub-node is defined by the + standard binding for regulators; see regulator.txt. + dcdc[1-3], fet[1-7] and ldo[1-2] respectively. +- vsys[1-3]-supply: The input supply for DCDC[1-3] respectively. +- infet[1-7]-supply: The input supply for FET[1-7] respectively. +- vsys-l[1-2]-supply: The input supply for LDO[1-2] respectively. + +Optional properties: +- ti,enable-ext-control: This is applicable for DCDC1, DCDC2 and DCDC3. + If DCDCs are externally controlled then this property should be there. +- "dcdc-ext-control-gpios: This is applicable for DCDC1, DCDC2 and DCDC3. + If DCDCs are externally controlled and if it is from GPIO then GPIO + number should be provided. If it is externally controlled and no GPIO + entry then driver will just configure this rails as external control + and will not provide any enable/disable APIs. + +Each regulator is defined using the standard binding for regulators. + +Example: + + tps65090@48 { + compatible = "ti,tps65090"; + reg = <0x48>; + interrupts = <0 88 0x4>; + + vsys1-supply = <&some_reg>; + vsys2-supply = <&some_reg>; + vsys3-supply = <&some_reg>; + infet1-supply = <&some_reg>; + infet2-supply = <&some_reg>; + infet3-supply = <&some_reg>; + infet4-supply = <&some_reg>; + infet5-supply = <&some_reg>; + infet6-supply = <&some_reg>; + infet7-supply = <&some_reg>; + vsys_l1-supply = <&some_reg>; + vsys_l2-supply = <&some_reg>; + + regulators { + dcdc1 { + regulator-name = "dcdc1"; + regulator-boot-on; + regulator-always-on; + ti,enable-ext-control; + dcdc-ext-control-gpios = <&gpio 10 0>; + }; + + dcdc2 { + regulator-name = "dcdc2"; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3 { + regulator-name = "dcdc3"; + regulator-boot-on; + regulator-always-on; + }; + + fet1 { + regulator-name = "fet1"; + regulator-boot-on; + regulator-always-on; + }; + + fet2 { + regulator-name = "fet2"; + regulator-boot-on; + regulator-always-on; + }; + + fet3 { + regulator-name = "fet3"; + regulator-boot-on; + regulator-always-on; + }; + + fet4 { + regulator-name = "fet4"; + regulator-boot-on; + regulator-always-on; + }; + + fet5 { + regulator-name = "fet5"; + regulator-boot-on; + regulator-always-on; + }; + + fet6 { + regulator-name = "fet6"; + regulator-boot-on; + regulator-always-on; + }; + + fet7 { + regulator-name = "fet7"; + regulator-boot-on; + regulator-always-on; + }; + + ldo1 { + regulator-name = "ldo1"; + regulator-boot-on; + regulator-always-on; + }; + + ldo2 { + regulator-name = "ldo2"; + regulator-boot-on; + regulator-always-on; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/video/backlight/max8925-backlight.txt b/Documentation/devicetree/bindings/video/backlight/max8925-backlight.txt new file mode 100644 index 0000000000000000000000000000000000000000..b4cffdaa41377a8aa7d011b4becd1541ded49ff1 --- /dev/null +++ b/Documentation/devicetree/bindings/video/backlight/max8925-backlight.txt @@ -0,0 +1,10 @@ +88pm860x-backlight bindings + +Optional properties: + - maxim,max8925-dual-string: whether support dual string + +Example: + + backlights { + maxim,max8925-dual-string = <0>; + }; diff --git a/arch/arm/boot/dts/mmp2-brownstone.dts b/arch/arm/boot/dts/mmp2-brownstone.dts index c9b4f27d191e1c61c7099da10910b69d24c34b8d..7f70a39459f649d7051b5423c754e356686762db 100644 --- a/arch/arm/boot/dts/mmp2-brownstone.dts +++ b/arch/arm/boot/dts/mmp2-brownstone.dts @@ -29,6 +29,164 @@ }; twsi1: i2c@d4011000 { status = "okay"; + pmic: max8925@3c { + compatible = "maxium,max8925"; + reg = <0x3c>; + interrupts = <1>; + interrupt-parent = <&intcmux4>; + interrupt-controller; + #interrupt-cells = <1>; + maxim,tsc-irq = <0>; + + regulators { + SDV1 { + regulator-min-microvolt = <637500>; + regulator-max-microvolt = <1425000>; + regulator-boot-on; + regulator-always-on; + }; + SDV2 { + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <2225000>; + regulator-boot-on; + regulator-always-on; + }; + SDV3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO1 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO2 { + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <2250000>; + regulator-boot-on; + regulator-always-on; + }; + LDO3 { + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <2250000>; + regulator-boot-on; + regulator-always-on; + }; + LDO4 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO5 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO6 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO7 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO8 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO9 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO10 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + }; + LDO11 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO12 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO13 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO14 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO15 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO16 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO17 { + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <2250000>; + regulator-boot-on; + regulator-always-on; + }; + LDO18 { + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <2250000>; + regulator-boot-on; + regulator-always-on; + }; + LDO19 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO20 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + }; + backlight { + maxim,max8925-dual-string = <0>; + }; + charger { + batt-detect = <0>; + topoff-threshold = <1>; + fast-charge = <7>; + no-temp-support = <0>; + no-insert-detect = <0>; + }; + }; }; rtc: rtc@d4010000 { status = "okay"; diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi index 0514fb41627e1130a52d3c4ed56ff81ea23d68d0..1429ac05b36d45cff8aff69e745e98444c547f88 100644 --- a/arch/arm/boot/dts/mmp2.dtsi +++ b/arch/arm/boot/dts/mmp2.dtsi @@ -46,7 +46,7 @@ mrvl,intc-nr-irqs = <64>; }; - intcmux4@d4282150 { + intcmux4: interrupt-controller@d4282150 { compatible = "mrvl,mmp2-mux-intc"; interrupts = <4>; interrupt-controller; @@ -201,6 +201,8 @@ compatible = "mrvl,mmp-twsi"; reg = <0xd4011000 0x1000>; interrupts = <7>; + #address-cells = <1>; + #size-cells = <0>; mrvl,i2c-fast-mode; status = "disabled"; }; diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c index 1c7c834a5b5f5fb819dc56b6c8bc01edfc62f4d8..8cef477d6b006ac81e890e68c9965abecb2d8a97 100644 --- a/arch/arm/mach-omap2/board-zoom-display.c +++ b/arch/arm/mach-omap2/board-zoom-display.c @@ -49,13 +49,13 @@ static void zoom_panel_disable_lcd(struct omap_dss_device *dssdev) { } -/* - * PWMA/B register offsets (TWL4030_MODULE_PWMA) - */ +/* Register offsets in TWL4030_MODULE_INTBR */ #define TWL_INTBR_PMBR1 0xD #define TWL_INTBR_GPBR1 0xC -#define TWL_LED_PWMON 0x0 -#define TWL_LED_PWMOFF 0x1 + +/* Register offsets in TWL_MODULE_PWM */ +#define TWL_LED_PWMON 0x3 +#define TWL_LED_PWMOFF 0x4 static int zoom_set_bl_intensity(struct omap_dss_device *dssdev, int level) { @@ -93,8 +93,8 @@ static int zoom_set_bl_intensity(struct omap_dss_device *dssdev, int level) } c = ((50 * (100 - level)) / 100) + 1; - twl_i2c_write_u8(TWL4030_MODULE_PWM1, 0x7F, TWL_LED_PWMOFF); - twl_i2c_write_u8(TWL4030_MODULE_PWM1, c, TWL_LED_PWMON); + twl_i2c_write_u8(TWL_MODULE_PWM, 0x7F, TWL_LED_PWMOFF); + twl_i2c_write_u8(TWL_MODULE_PWM, c, TWL_LED_PWMON); #else pr_warn("Backlight not enabled\n"); #endif diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index b89d250f56e747744bfa98cbd92383bf3d63f203..74e17f19cc3386f6a43d857231c0fc2fca351903 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -657,6 +657,13 @@ config GPIO_JANZ_TTL This driver provides support for driving the pins in output mode only. Input mode is not supported. +config GPIO_PALMAS + bool "TI PALMAS series PMICs GPIO" + depends on MFD_PALMAS + help + Select this option to enable GPIO driver for the TI PALMAS + series chip family. + config GPIO_TPS6586X bool "TPS6586X GPIO" depends on MFD_TPS6586X diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 45a388c21d0468f54782492dc014dcdbb0a5df14..6dbcba2e5cacc43c61b7a3a429a939248fc4df22 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -68,6 +68,7 @@ obj-$(CONFIG_GPIO_TC3589X) += gpio-tc3589x.o obj-$(CONFIG_ARCH_TEGRA) += gpio-tegra.o obj-$(CONFIG_GPIO_TIMBERDALE) += gpio-timberdale.o obj-$(CONFIG_ARCH_DAVINCI_TNETV107X) += gpio-tnetv107x.o +obj-$(CONFIG_GPIO_PALMAS) += gpio-palmas.o obj-$(CONFIG_GPIO_TPS6586X) += gpio-tps6586x.o obj-$(CONFIG_GPIO_TPS65910) += gpio-tps65910.o obj-$(CONFIG_GPIO_TPS65912) += gpio-tps65912.o diff --git a/drivers/gpio/gpio-palmas.c b/drivers/gpio/gpio-palmas.c new file mode 100644 index 0000000000000000000000000000000000000000..e3a4e56f5a4233d4754449fcd342b4b41c9d623f --- /dev/null +++ b/drivers/gpio/gpio-palmas.c @@ -0,0 +1,184 @@ +/* + * TI Palma series PMIC's GPIO driver. + * + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. + * + * Author: Laxman Dewangan + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +#include +#include +#include +#include +#include + +struct palmas_gpio { + struct gpio_chip gpio_chip; + struct palmas *palmas; +}; + +static inline struct palmas_gpio *to_palmas_gpio(struct gpio_chip *chip) +{ + return container_of(chip, struct palmas_gpio, gpio_chip); +} + +static int palmas_gpio_get(struct gpio_chip *gc, unsigned offset) +{ + struct palmas_gpio *pg = to_palmas_gpio(gc); + struct palmas *palmas = pg->palmas; + unsigned int val; + int ret; + + ret = palmas_read(palmas, PALMAS_GPIO_BASE, PALMAS_GPIO_DATA_IN, &val); + if (ret < 0) { + dev_err(gc->dev, "GPIO_DATA_IN read failed, err = %d\n", ret); + return ret; + } + return !!(val & BIT(offset)); +} + +static void palmas_gpio_set(struct gpio_chip *gc, unsigned offset, + int value) +{ + struct palmas_gpio *pg = to_palmas_gpio(gc); + struct palmas *palmas = pg->palmas; + int ret; + + if (value) + ret = palmas_write(palmas, PALMAS_GPIO_BASE, + PALMAS_GPIO_SET_DATA_OUT, BIT(offset)); + else + ret = palmas_write(palmas, PALMAS_GPIO_BASE, + PALMAS_GPIO_CLEAR_DATA_OUT, BIT(offset)); + if (ret < 0) + dev_err(gc->dev, "%s write failed, err = %d\n", + (value) ? "GPIO_SET_DATA_OUT" : "GPIO_CLEAR_DATA_OUT", + ret); +} + +static int palmas_gpio_output(struct gpio_chip *gc, unsigned offset, + int value) +{ + struct palmas_gpio *pg = to_palmas_gpio(gc); + struct palmas *palmas = pg->palmas; + int ret; + + /* Set the initial value */ + palmas_gpio_set(gc, offset, value); + + ret = palmas_update_bits(palmas, PALMAS_GPIO_BASE, + PALMAS_GPIO_DATA_DIR, BIT(offset), BIT(offset)); + if (ret < 0) + dev_err(gc->dev, "GPIO_DATA_DIR write failed, err = %d\n", ret); + return ret; +} + +static int palmas_gpio_input(struct gpio_chip *gc, unsigned offset) +{ + struct palmas_gpio *pg = to_palmas_gpio(gc); + struct palmas *palmas = pg->palmas; + int ret; + + ret = palmas_update_bits(palmas, PALMAS_GPIO_BASE, + PALMAS_GPIO_DATA_DIR, BIT(offset), 0); + if (ret < 0) + dev_err(gc->dev, "GPIO_DATA_DIR write failed, err = %d\n", ret); + return ret; +} + +static int palmas_gpio_to_irq(struct gpio_chip *gc, unsigned offset) +{ + struct palmas_gpio *pg = to_palmas_gpio(gc); + struct palmas *palmas = pg->palmas; + + return palmas_irq_get_virq(palmas, PALMAS_GPIO_0_IRQ + offset); +} + +static int palmas_gpio_probe(struct platform_device *pdev) +{ + struct palmas *palmas = dev_get_drvdata(pdev->dev.parent); + struct palmas_platform_data *palmas_pdata; + struct palmas_gpio *palmas_gpio; + int ret; + + palmas_gpio = devm_kzalloc(&pdev->dev, + sizeof(*palmas_gpio), GFP_KERNEL); + if (!palmas_gpio) { + dev_err(&pdev->dev, "Could not allocate palmas_gpio\n"); + return -ENOMEM; + } + + palmas_gpio->palmas = palmas; + palmas_gpio->gpio_chip.owner = THIS_MODULE; + palmas_gpio->gpio_chip.label = dev_name(&pdev->dev); + palmas_gpio->gpio_chip.ngpio = 8; + palmas_gpio->gpio_chip.can_sleep = 1; + palmas_gpio->gpio_chip.direction_input = palmas_gpio_input; + palmas_gpio->gpio_chip.direction_output = palmas_gpio_output; + palmas_gpio->gpio_chip.to_irq = palmas_gpio_to_irq; + palmas_gpio->gpio_chip.set = palmas_gpio_set; + palmas_gpio->gpio_chip.get = palmas_gpio_get; + palmas_gpio->gpio_chip.dev = &pdev->dev; +#ifdef CONFIG_OF_GPIO + palmas_gpio->gpio_chip.of_node = palmas->dev->of_node; +#endif + palmas_pdata = dev_get_platdata(palmas->dev); + if (palmas_pdata && palmas_pdata->gpio_base) + palmas_gpio->gpio_chip.base = palmas_pdata->gpio_base; + else + palmas_gpio->gpio_chip.base = -1; + + ret = gpiochip_add(&palmas_gpio->gpio_chip); + if (ret < 0) { + dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret); + return ret; + } + + platform_set_drvdata(pdev, palmas_gpio); + return ret; +} + +static int palmas_gpio_remove(struct platform_device *pdev) +{ + struct palmas_gpio *palmas_gpio = platform_get_drvdata(pdev); + + return gpiochip_remove(&palmas_gpio->gpio_chip); +} + +static struct platform_driver palmas_gpio_driver = { + .driver.name = "palmas-gpio", + .driver.owner = THIS_MODULE, + .probe = palmas_gpio_probe, + .remove = palmas_gpio_remove, +}; + +static int __init palmas_gpio_init(void) +{ + return platform_driver_register(&palmas_gpio_driver); +} +subsys_initcall(palmas_gpio_init); + +static void __exit palmas_gpio_exit(void) +{ + platform_driver_unregister(&palmas_gpio_driver); +} +module_exit(palmas_gpio_exit); + +MODULE_ALIAS("platform:palmas-gpio"); +MODULE_AUTHOR("Laxman Dewangan "); +MODULE_DESCRIPTION("GPIO driver for TI Palmas series PMICs"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/misc/max8925_onkey.c b/drivers/input/misc/max8925_onkey.c index 369a39de4ff32100ea8dd9847ceb22e37191caf3..f9179b2585a90e5b80f0715da13dbfefdec1cece 100644 --- a/drivers/input/misc/max8925_onkey.c +++ b/drivers/input/misc/max8925_onkey.c @@ -100,9 +100,6 @@ static int max8925_onkey_probe(struct platform_device *pdev) input->dev.parent = &pdev->dev; input_set_capability(input, EV_KEY, KEY_POWER); - irq[0] += chip->irq_base; - irq[1] += chip->irq_base; - error = request_threaded_irq(irq[0], NULL, max8925_onkey_handler, IRQF_ONESHOT, "onkey-down", info); if (error < 0) { diff --git a/drivers/memstick/host/rtsx_pci_ms.c b/drivers/memstick/host/rtsx_pci_ms.c index f5ddb82dadb71cb6d726f48f15782bedfa21016c..64a779c58a74fd9346444c62663817010f5331d3 100644 --- a/drivers/memstick/host/rtsx_pci_ms.c +++ b/drivers/memstick/host/rtsx_pci_ms.c @@ -426,6 +426,9 @@ static void rtsx_pci_ms_request(struct memstick_host *msh) dev_dbg(ms_dev(host), "--> %s\n", __func__); + if (rtsx_pci_card_exclusive_check(host->pcr, RTSX_MS_CARD)) + return; + schedule_work(&host->handle_req); } @@ -441,6 +444,10 @@ static int rtsx_pci_ms_set_param(struct memstick_host *msh, dev_dbg(ms_dev(host), "%s: param = %d, value = %d\n", __func__, param, value); + err = rtsx_pci_card_exclusive_check(host->pcr, RTSX_MS_CARD); + if (err) + return err; + switch (param) { case MEMSTICK_POWER: if (value == MEMSTICK_POWER_ON) diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c index 391e23e6a6470e26ea68d47bce622280f00bce70..582bda543520dcbde0f6baaae86d5f9b626787f0 100644 --- a/drivers/mfd/88pm800.c +++ b/drivers/mfd/88pm800.c @@ -531,7 +531,7 @@ static int pm800_probe(struct i2c_client *client, ret = device_800_init(chip, pdata); if (ret) { dev_err(chip->dev, "%s id 0x%x failed!\n", __func__, chip->id); - goto err_800_init; + goto err_subchip_alloc; } ret = pm800_pages_init(chip); @@ -546,10 +546,8 @@ static int pm800_probe(struct i2c_client *client, err_page_init: mfd_remove_devices(chip->dev); device_irq_exit_800(chip); -err_800_init: - devm_kfree(&client->dev, subchip); err_subchip_alloc: - pm80x_deinit(client); + pm80x_deinit(); out_init: return ret; } @@ -562,9 +560,7 @@ static int pm800_remove(struct i2c_client *client) device_irq_exit_800(chip); pm800_pages_exit(chip); - devm_kfree(&client->dev, chip->subchip); - - pm80x_deinit(client); + pm80x_deinit(); return 0; } diff --git a/drivers/mfd/88pm805.c b/drivers/mfd/88pm805.c index e671230be2b150fb104c9a30a5f19131020e8239..65d7ac099b2065d1945b936d634d2416a78f26cd 100644 --- a/drivers/mfd/88pm805.c +++ b/drivers/mfd/88pm805.c @@ -257,7 +257,7 @@ static int pm805_probe(struct i2c_client *client, pdata->plat_config(chip, pdata); err_805_init: - pm80x_deinit(client); + pm80x_deinit(); out_init: return ret; } @@ -269,7 +269,7 @@ static int pm805_remove(struct i2c_client *client) mfd_remove_devices(chip->dev); device_irq_exit_805(chip); - pm80x_deinit(client); + pm80x_deinit(); return 0; } diff --git a/drivers/mfd/88pm80x.c b/drivers/mfd/88pm80x.c index 1adb355d86d1a5782c8c3d8bf1513a176c2e8519..f736a46eb8c0e41e3785e76dc0e89d17d1306068 100644 --- a/drivers/mfd/88pm80x.c +++ b/drivers/mfd/88pm80x.c @@ -48,14 +48,12 @@ int pm80x_init(struct i2c_client *client, ret = PTR_ERR(map); dev_err(&client->dev, "Failed to allocate register map: %d\n", ret); - goto err_regmap_init; + return ret; } chip->id = id->driver_data; - if (chip->id < CHIP_PM800 || chip->id > CHIP_PM805) { - ret = -EINVAL; - goto err_chip_id; - } + if (chip->id < CHIP_PM800 || chip->id > CHIP_PM805) + return -EINVAL; chip->client = client; chip->regmap = map; @@ -82,19 +80,11 @@ int pm80x_init(struct i2c_client *client, } return 0; - -err_chip_id: - regmap_exit(map); -err_regmap_init: - devm_kfree(&client->dev, chip); - return ret; } EXPORT_SYMBOL_GPL(pm80x_init); -int pm80x_deinit(struct i2c_client *client) +int pm80x_deinit(void) { - struct pm80x_chip *chip = i2c_get_clientdata(client); - /* * workaround: clear the dependency between pm800 and pm805. * would remove it after HW chip fixes the issue. @@ -103,10 +93,6 @@ int pm80x_deinit(struct i2c_client *client) g_pm80x_chip->companion = NULL; else g_pm80x_chip = NULL; - - regmap_exit(chip->regmap); - devm_kfree(&client->dev, chip); - return 0; } EXPORT_SYMBOL_GPL(pm80x_deinit); diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index ff553babf455025c2a5ce303297a15f404d2d5e3..671f5b171c737d78c9659d2afe3a68e02fd3981f 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -65,7 +65,7 @@ config MFD_SM501_GPIO config MFD_RTSX_PCI tristate "Support for Realtek PCI-E card reader" - depends on PCI + depends on PCI && GENERIC_HARDIRQS select MFD_CORE help This supports for Realtek PCI-Express card reader including rts5209, @@ -95,7 +95,7 @@ config MFD_DM355EVM_MSP config MFD_TI_SSP tristate "TI Sequencer Serial Port support" - depends on ARCH_DAVINCI_TNETV107X + depends on ARCH_DAVINCI_TNETV107X && GENERIC_HARDIRQS select MFD_CORE ---help--- Say Y here if you want support for the Sequencer Serial Port @@ -109,6 +109,7 @@ config MFD_TI_AM335X_TSCADC select MFD_CORE select REGMAP select REGMAP_MMIO + depends on GENERIC_HARDIRQS help If you say yes here you get support for Texas Instruments series of Touch Screen /ADC chips. @@ -126,6 +127,7 @@ config HTC_EGPIO config HTC_PASIC3 tristate "HTC PASIC3 LED/DS1WM chip support" select MFD_CORE + depends on GENERIC_HARDIRQS help This core driver provides register access for the LED/DS1WM chips labeled "AIC2" and "AIC3", found on HTC Blueangel and @@ -157,6 +159,7 @@ config MFD_LM3533 depends on I2C select MFD_CORE select REGMAP_I2C + depends on GENERIC_HARDIRQS help Say yes here to enable support for National Semiconductor / TI LM3533 Lighting Power chips. @@ -171,6 +174,7 @@ config TPS6105X select REGULATOR select MFD_CORE select REGULATOR_FIXED_VOLTAGE + depends on GENERIC_HARDIRQS help This option enables a driver for the TP61050/TPS61052 high-power "white LED driver". This boost converter is @@ -193,7 +197,7 @@ config TPS65010 config TPS6507X tristate "TPS6507x Power Management / Touch Screen chips" select MFD_CORE - depends on I2C + depends on I2C && GENERIC_HARDIRQS help If you say yes here you get support for the TPS6507x series of Power Management / Touch Screen chips. These include voltage @@ -204,7 +208,7 @@ config TPS6507X config MFD_TPS65217 tristate "TPS65217 Power Management / White LED chips" - depends on I2C + depends on I2C && GENERIC_HARDIRQS select MFD_CORE select REGMAP_I2C help @@ -234,7 +238,7 @@ config MFD_TPS6586X config MFD_TPS65910 bool "TPS65910 Power Management chip" - depends on I2C=y && GPIOLIB + depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS select MFD_CORE select REGMAP_I2C select REGMAP_IRQ @@ -251,7 +255,7 @@ config MFD_TPS65912_I2C bool "TPS65912 Power Management chip with I2C" select MFD_CORE select MFD_TPS65912 - depends on I2C=y && GPIOLIB + depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS help If you say yes here you get support for the TPS65912 series of PM chips with I2C interface. @@ -260,7 +264,7 @@ config MFD_TPS65912_SPI bool "TPS65912 Power Management chip with SPI" select MFD_CORE select MFD_TPS65912 - depends on SPI_MASTER && GPIOLIB + depends on SPI_MASTER && GPIOLIB && GENERIC_HARDIRQS help If you say yes here you get support for the TPS65912 series of PM chips with SPI interface. @@ -330,13 +334,13 @@ config TWL4030_POWER config MFD_TWL4030_AUDIO bool - depends on TWL4030_CORE + depends on TWL4030_CORE && GENERIC_HARDIRQS select MFD_CORE default n config TWL6040_CORE bool "Support for TWL6040 audio codec" - depends on I2C=y + depends on I2C=y && GENERIC_HARDIRQS select MFD_CORE select REGMAP_I2C select REGMAP_IRQ @@ -405,7 +409,7 @@ config MFD_TMIO config MFD_T7L66XB bool "Support Toshiba T7L66XB" - depends on ARM && HAVE_CLK + depends on ARM && HAVE_CLK && GENERIC_HARDIRQS select MFD_CORE select MFD_TMIO help @@ -413,7 +417,7 @@ config MFD_T7L66XB config MFD_SMSC bool "Support for the SMSC ECE1099 series chips" - depends on I2C=y + depends on I2C=y && GENERIC_HARDIRQS select MFD_CORE select REGMAP_I2C help @@ -460,7 +464,7 @@ config MFD_DA9052_SPI select REGMAP_SPI select REGMAP_IRQ select PMIC_DA9052 - depends on SPI_MASTER=y + depends on SPI_MASTER=y && GENERIC_HARDIRQS help Support for the Dialog Semiconductor DA9052 PMIC when controlled using SPI. This driver provides common support @@ -472,7 +476,7 @@ config MFD_DA9052_I2C select REGMAP_I2C select REGMAP_IRQ select PMIC_DA9052 - depends on I2C=y + depends on I2C=y && GENERIC_HARDIRQS help Support for the Dialog Semiconductor DA9052 PMIC when controlled using I2C. This driver provides common support @@ -485,7 +489,7 @@ config MFD_DA9055 select REGMAP_IRQ select PMIC_DA9055 select MFD_CORE - depends on I2C=y + depends on I2C=y && GENERIC_HARDIRQS help Say yes here for support of Dialog Semiconductor DA9055. This is a Power Management IC. This driver provides common support for @@ -508,7 +512,7 @@ config PMIC_ADP5520 config MFD_LP8788 bool "Texas Instruments LP8788 Power Management Unit Driver" - depends on I2C=y + depends on I2C=y && GENERIC_HARDIRQS select MFD_CORE select REGMAP_I2C select IRQ_DOMAIN @@ -611,7 +615,7 @@ config MFD_ARIZONA_I2C select MFD_ARIZONA select MFD_CORE select REGMAP_I2C - depends on I2C + depends on I2C && GENERIC_HARDIRQS help Support for the Wolfson Microelectronics Arizona platform audio SoC core functionality controlled via I2C. @@ -621,7 +625,7 @@ config MFD_ARIZONA_SPI select MFD_ARIZONA select MFD_CORE select REGMAP_SPI - depends on SPI_MASTER + depends on SPI_MASTER && GENERIC_HARDIRQS help Support for the Wolfson Microelectronics Arizona platform audio SoC core functionality controlled via I2C. @@ -641,7 +645,7 @@ config MFD_WM5110 config MFD_WM8400 bool "Support Wolfson Microelectronics WM8400" select MFD_CORE - depends on I2C=y + depends on I2C=y && GENERIC_HARDIRQS select REGMAP_I2C help Support for the Wolfson Microelecronics WM8400 PMIC and audio @@ -785,7 +789,7 @@ config MFD_MC13783 config MFD_MC13XXX tristate - depends on SPI_MASTER || I2C + depends on (SPI_MASTER || I2C) && GENERIC_HARDIRQS select MFD_CORE select MFD_MC13783 help @@ -796,7 +800,7 @@ config MFD_MC13XXX config MFD_MC13XXX_SPI tristate "Freescale MC13783 and MC13892 SPI interface" - depends on SPI_MASTER + depends on SPI_MASTER && GENERIC_HARDIRQS select REGMAP_SPI select MFD_MC13XXX help @@ -804,7 +808,7 @@ config MFD_MC13XXX_SPI config MFD_MC13XXX_I2C tristate "Freescale MC13892 I2C interface" - depends on I2C + depends on I2C && GENERIC_HARDIRQS select REGMAP_I2C select MFD_MC13XXX help @@ -822,7 +826,7 @@ config ABX500_CORE config AB3100_CORE bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions" - depends on I2C=y && ABX500_CORE + depends on I2C=y && ABX500_CORE && GENERIC_HARDIRQS select MFD_CORE default y if ARCH_U300 help @@ -909,7 +913,7 @@ config MFD_TIMBERDALE config LPC_SCH tristate "Intel SCH LPC" - depends on PCI + depends on PCI && GENERIC_HARDIRQS select MFD_CORE help LPC bridge function of the Intel SCH provides support for @@ -917,7 +921,7 @@ config LPC_SCH config LPC_ICH tristate "Intel ICH LPC" - depends on PCI + depends on PCI && GENERIC_HARDIRQS select MFD_CORE help The LPC bridge function of the Intel ICH provides support for @@ -928,7 +932,7 @@ config LPC_ICH config MFD_RDC321X tristate "Support for RDC-R321x southbridge" select MFD_CORE - depends on PCI + depends on PCI && GENERIC_HARDIRQS help Say yes here if you want to have support for the RDC R-321x SoC southbridge which provides access to GPIOs and Watchdog using the @@ -937,7 +941,7 @@ config MFD_RDC321X config MFD_JANZ_CMODIO tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board" select MFD_CORE - depends on PCI + depends on PCI && GENERIC_HARDIRQS help This is the core driver for the Janz CMOD-IO PCI MODULbus carrier board. This device is a PCI to MODULbus bridge which may @@ -955,7 +959,7 @@ config MFD_JZ4740_ADC config MFD_VX855 tristate "Support for VIA VX855/VX875 integrated south bridge" - depends on PCI + depends on PCI && GENERIC_HARDIRQS select MFD_CORE help Say yes here to enable support for various functions of the @@ -964,7 +968,7 @@ config MFD_VX855 config MFD_WL1273_CORE tristate "Support for TI WL1273 FM radio." - depends on I2C + depends on I2C && GENERIC_HARDIRQS select MFD_CORE default n help @@ -1028,7 +1032,7 @@ config MFD_TPS65090 config MFD_AAT2870_CORE bool "Support for the AnalogicTech AAT2870" select MFD_CORE - depends on I2C=y && GPIOLIB + depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS help If you say yes here you get support for the AAT2870. This driver provides common support for accessing the device, @@ -1060,7 +1064,7 @@ config MFD_RC5T583 config MFD_STA2X11 bool "STA2X11 multi function device support" - depends on STA2X11 + depends on STA2X11 && GENERIC_HARDIRQS select MFD_CORE select REGMAP_MMIO @@ -1077,7 +1081,7 @@ config MFD_PALMAS select MFD_CORE select REGMAP_I2C select REGMAP_IRQ - depends on I2C=y + depends on I2C=y && GENERIC_HARDIRQS help If you say yes here you get support for the Palmas series of PMIC chips from Texas Instruments. @@ -1085,7 +1089,7 @@ config MFD_PALMAS config MFD_VIPERBOARD tristate "Support for Nano River Technologies Viperboard" select MFD_CORE - depends on USB + depends on USB && GENERIC_HARDIRQS default n help Say yes here if you want support for Nano River Technologies @@ -1099,7 +1103,7 @@ config MFD_VIPERBOARD config MFD_RETU tristate "Support for Retu multi-function device" select MFD_CORE - depends on I2C + depends on I2C && GENERIC_HARDIRQS select REGMAP_IRQ help Retu is a multi-function device found on Nokia Internet Tablets @@ -1110,7 +1114,7 @@ config MFD_AS3711 select MFD_CORE select REGMAP_I2C select REGMAP_IRQ - depends on I2C=y + depends on I2C=y && GENERIC_HARDIRQS help Support for the AS3711 PMIC from AMS diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 8b977f8045ae8f52cbc283838fa1cbfe375809f9..b90409c236645ea3769e963a142b263e7c3eb35f 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -9,7 +9,7 @@ obj-$(CONFIG_MFD_88PM805) += 88pm805.o 88pm80x.o obj-$(CONFIG_MFD_SM501) += sm501.o obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o -rtsx_pci-objs := rtsx_pcr.o rts5209.o rts5229.o rtl8411.o +rtsx_pci-objs := rtsx_pcr.o rts5209.o rts5229.o rtl8411.o rts5227.o obj-$(CONFIG_MFD_RTSX_PCI) += rtsx_pci.o obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 8b5d685ab98089bdbc0afa2b29d33064193d8f85..7c84ced2e01b44e2de6e2991ebae0e7a388ba246 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -320,6 +320,7 @@ static struct abx500_ops ab8500_ops = { .mask_and_set_register = ab8500_mask_and_set_register, .event_registers_startup_state_get = NULL, .startup_irq_enabled = NULL, + .dump_all_banks = ab8500_dump_all_banks, }; static void ab8500_irq_lock(struct irq_data *data) @@ -368,16 +369,48 @@ static void ab8500_irq_mask(struct irq_data *data) int mask = 1 << (offset % 8); ab8500->mask[index] |= mask; + + /* The AB8500 GPIOs have two interrupts each (rising & falling). */ + if (offset >= AB8500_INT_GPIO6R && offset <= AB8500_INT_GPIO41R) + ab8500->mask[index + 2] |= mask; + if (offset >= AB9540_INT_GPIO50R && offset <= AB9540_INT_GPIO54R) + ab8500->mask[index + 1] |= mask; + if (offset == AB8540_INT_GPIO43R || offset == AB8540_INT_GPIO44R) + /* Here the falling IRQ is one bit lower */ + ab8500->mask[index] |= (mask << 1); } static void ab8500_irq_unmask(struct irq_data *data) { struct ab8500 *ab8500 = irq_data_get_irq_chip_data(data); + unsigned int type = irqd_get_trigger_type(data); int offset = data->hwirq; int index = offset / 8; int mask = 1 << (offset % 8); - ab8500->mask[index] &= ~mask; + if (type & IRQ_TYPE_EDGE_RISING) + ab8500->mask[index] &= ~mask; + + /* The AB8500 GPIOs have two interrupts each (rising & falling). */ + if (type & IRQ_TYPE_EDGE_FALLING) { + if (offset >= AB8500_INT_GPIO6R && offset <= AB8500_INT_GPIO41R) + ab8500->mask[index + 2] &= ~mask; + else if (offset >= AB9540_INT_GPIO50R && offset <= AB9540_INT_GPIO54R) + ab8500->mask[index + 1] &= ~mask; + else if (offset == AB8540_INT_GPIO43R || offset == AB8540_INT_GPIO44R) + /* Here the falling IRQ is one bit lower */ + ab8500->mask[index] &= ~(mask << 1); + else + ab8500->mask[index] &= ~mask; + } else { + /* Satisfies the case where type is not set. */ + ab8500->mask[index] &= ~mask; + } +} + +static int ab8500_irq_set_type(struct irq_data *data, unsigned int type) +{ + return 0; } static struct irq_chip ab8500_irq_chip = { @@ -387,6 +420,7 @@ static struct irq_chip ab8500_irq_chip = { .irq_mask = ab8500_irq_mask, .irq_disable = ab8500_irq_mask, .irq_unmask = ab8500_irq_unmask, + .irq_set_type = ab8500_irq_set_type, }; static int ab8500_handle_hierarchical_line(struct ab8500 *ab8500, @@ -411,6 +445,19 @@ static int ab8500_handle_hierarchical_line(struct ab8500 *ab8500, line = (i << 3) + int_bit; latch_val &= ~(1 << int_bit); + /* + * This handles the falling edge hwirqs from the GPIO + * lines. Route them back to the line registered for the + * rising IRQ, as this is merely a flag for the same IRQ + * in linux terms. + */ + if (line >= AB8500_INT_GPIO6F && line <= AB8500_INT_GPIO41F) + line -= 16; + if (line >= AB9540_INT_GPIO50F && line <= AB9540_INT_GPIO54F) + line -= 8; + if (line == AB8540_INT_GPIO43F || line == AB8540_INT_GPIO44F) + line += 1; + handle_nested_irq(ab8500->irq_base + line); } while (latch_val); @@ -521,6 +568,7 @@ static irqreturn_t ab8500_irq(int irq, void *dev) int virq = ab8500_irq_get_virq(ab8500, line); handle_nested_irq(virq); + ab8500_debug_register_interrupt(line); value &= ~(1 << bit); } while (value); @@ -929,7 +977,7 @@ static struct resource ab8505_iddet_resources[] = { static struct resource ab8500_temp_resources[] = { { - .name = "AB8500_TEMP_WARM", + .name = "ABX500_TEMP_WARM", .start = AB8500_INT_TEMP_WARM, .end = AB8500_INT_TEMP_WARM, .flags = IORESOURCE_IRQ, @@ -1005,8 +1053,8 @@ static struct mfd_cell abx500_common_devs[] = { .of_compatible = "stericsson,ab8500-denc", }, { - .name = "ab8500-temp", - .of_compatible = "stericsson,ab8500-temp", + .name = "abx500-temp", + .of_compatible = "stericsson,abx500-temp", .num_resources = ARRAY_SIZE(ab8500_temp_resources), .resources = ab8500_temp_resources, }, @@ -1049,7 +1097,7 @@ static struct mfd_cell ab8500_bm_devs[] = { static struct mfd_cell ab8500_devs[] = { { - .name = "ab8500-gpio", + .name = "pinctrl-ab8500", .of_compatible = "stericsson,ab8500-gpio", }, { @@ -1066,7 +1114,8 @@ static struct mfd_cell ab8500_devs[] = { static struct mfd_cell ab9540_devs[] = { { - .name = "ab8500-gpio", + .name = "pinctrl-ab9540", + .of_compatible = "stericsson,ab9540-gpio", }, { .name = "ab9540-usb", diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c index 5a8e707bc038858a154a1d6a50657336ad5775fc..45fe3c50eb035f5dfff77e30c7cee3f6127413f3 100644 --- a/drivers/mfd/ab8500-debugfs.c +++ b/drivers/mfd/ab8500-debugfs.c @@ -4,6 +4,72 @@ * Author: Mattias Wallin for ST-Ericsson. * License Terms: GNU General Public License v2 */ +/* + * AB8500 register access + * ====================== + * + * read: + * # echo BANK > /ab8500/register-bank + * # echo ADDR > /ab8500/register-address + * # cat /ab8500/register-value + * + * write: + * # echo BANK > /ab8500/register-bank + * # echo ADDR > /ab8500/register-address + * # echo VALUE > /ab8500/register-value + * + * read all registers from a bank: + * # echo BANK > /ab8500/register-bank + * # cat /ab8500/all-bank-register + * + * BANK target AB8500 register bank + * ADDR target AB8500 register address + * VALUE decimal or 0x-prefixed hexadecimal + * + * + * User Space notification on AB8500 IRQ + * ===================================== + * + * Allows user space entity to be notified when target AB8500 IRQ occurs. + * When subscribed, a sysfs entry is created in ab8500.i2c platform device. + * One can pool this file to get target IRQ occurence information. + * + * subscribe to an AB8500 IRQ: + * # echo IRQ > /ab8500/irq-subscribe + * + * unsubscribe from an AB8500 IRQ: + * # echo IRQ > /ab8500/irq-unsubscribe + * + * + * AB8500 register formated read/write access + * ========================================== + * + * Read: read data, data>>SHIFT, data&=MASK, output data + * [0xABCDEF98] shift=12 mask=0xFFF => 0x00000CDE + * Write: read data, data &= ~(MASK< [0xAB123F98] + * + * Usage: + * # echo "CMD [OPTIONS] BANK ADRESS [VALUE]" > $debugfs/ab8500/hwreg + * + * CMD read read access + * write write access + * + * BANK target reg bank + * ADDRESS target reg address + * VALUE (write) value to be updated + * + * OPTIONS + * -d|-dec (read) output in decimal + * -h|-hexa (read) output in 0x-hexa (default) + * -l|-w|-b 32bit (default), 16bit or 8bit reg access + * -m|-mask MASK 0x-hexa mask (default 0xFFFFFFFF) + * -s|-shift SHIFT bit shift value (read:left, write:right) + * -o|-offset OFFSET address offset to add to ADDRESS value + * + * Warning: bit shift operation is applied to bit-mask. + * Warning: bit shift direction depends on read or right command. + */ #include #include @@ -11,13 +77,30 @@ #include #include #include +#include +#include +#include #include #include +#include + +#ifdef CONFIG_DEBUG_FS +#include +#include +#endif static u32 debug_bank; static u32 debug_address; +static int irq_first; +static int irq_last; +static u32 *irq_count; +static int num_irqs; + +static struct device_attribute **dev_attr; +static char **event_name; + /** * struct ab8500_reg_range * @first: the first address of the range @@ -42,15 +125,35 @@ struct ab8500_prcmu_ranges { const struct ab8500_reg_range *range; }; +/* hwreg- "mask" and "shift" entries ressources */ +struct hwreg_cfg { + u32 bank; /* target bank */ + u32 addr; /* target address */ + uint fmt; /* format */ + uint mask; /* read/write mask, applied before any bit shift */ + int shift; /* bit shift (read:right shift, write:left shift */ +}; +/* fmt bit #0: 0=hexa, 1=dec */ +#define REG_FMT_DEC(c) ((c)->fmt & 0x1) +#define REG_FMT_HEX(c) (!REG_FMT_DEC(c)) + +static struct hwreg_cfg hwreg_cfg = { + .addr = 0, /* default: invalid phys addr */ + .fmt = 0, /* default: 32bit access, hex output */ + .mask = 0xFFFFFFFF, /* default: no mask */ + .shift = 0, /* default: no bit shift */ +}; + #define AB8500_NAME_STRING "ab8500" -#define AB8500_NUM_BANKS 22 +#define AB8500_ADC_NAME_STRING "gpadc" +#define AB8500_NUM_BANKS 24 #define AB8500_REV_REG 0x80 static struct ab8500_prcmu_ranges debug_ranges[AB8500_NUM_BANKS] = { [0x0] = { .num_ranges = 0, - .range = 0, + .range = NULL, }, [AB8500_SYS_CTRL1_BLOCK] = { .num_ranges = 3, @@ -215,7 +318,7 @@ static struct ab8500_prcmu_ranges debug_ranges[AB8500_NUM_BANKS] = { }, }, [AB8500_CHARGER] = { - .num_ranges = 8, + .num_ranges = 9, .range = (struct ab8500_reg_range[]) { { .first = 0x00, @@ -249,6 +352,10 @@ static struct ab8500_prcmu_ranges debug_ranges[AB8500_NUM_BANKS] = { .first = 0xC0, .last = 0xC2, }, + { + .first = 0xf5, + .last = 0xf6, + }, }, }, [AB8500_GAS_GAUGE] = { @@ -268,6 +375,24 @@ static struct ab8500_prcmu_ranges debug_ranges[AB8500_NUM_BANKS] = { }, }, }, + [AB8500_DEVELOPMENT] = { + .num_ranges = 1, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x00, + }, + }, + }, + [AB8500_DEBUG] = { + .num_ranges = 1, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x05, + .last = 0x07, + }, + }, + }, [AB8500_AUDIO] = { .num_ranges = 1, .range = (struct ab8500_reg_range[]) { @@ -354,15 +479,30 @@ static struct ab8500_prcmu_ranges debug_ranges[AB8500_NUM_BANKS] = { }, }; -static int ab8500_registers_print(struct seq_file *s, void *p) +static irqreturn_t ab8500_debug_handler(int irq, void *data) { - struct device *dev = s->private; - unsigned int i; - u32 bank = debug_bank; + char buf[16]; + struct kobject *kobj = (struct kobject *)data; + unsigned int irq_abb = irq - irq_first; - seq_printf(s, AB8500_NAME_STRING " register values:\n"); + if (irq_abb < num_irqs) + irq_count[irq_abb]++; + /* + * This makes it possible to use poll for events (POLLPRI | POLLERR) + * from userspace on sysfs file named + */ + sprintf(buf, "%d", irq); + sysfs_notify(kobj, NULL, buf); + + return IRQ_HANDLED; +} + +/* Prints to seq_file or log_buf */ +static int ab8500_registers_print(struct device *dev, u32 bank, + struct seq_file *s) +{ + unsigned int i; - seq_printf(s, " bank %u:\n", bank); for (i = 0; i < debug_ranges[bank].num_ranges; i++) { u32 reg; @@ -379,22 +519,42 @@ static int ab8500_registers_print(struct seq_file *s, void *p) return err; } - err = seq_printf(s, " [%u/0x%02X]: 0x%02X\n", bank, - reg, value); - if (err < 0) { - dev_err(dev, "seq_printf overflow\n"); - /* Error is not returned here since - * the output is wanted in any case */ - return 0; + if (s) { + err = seq_printf(s, " [%u/0x%02X]: 0x%02X\n", + bank, reg, value); + if (err < 0) { + dev_err(dev, + "seq_printf overflow bank=%d reg=%d\n", + bank, reg); + /* Error is not returned here since + * the output is wanted in any case */ + return 0; + } + } else { + printk(KERN_INFO" [%u/0x%02X]: 0x%02X\n", bank, + reg, value); } } } return 0; } +static int ab8500_print_bank_registers(struct seq_file *s, void *p) +{ + struct device *dev = s->private; + u32 bank = debug_bank; + + seq_printf(s, AB8500_NAME_STRING " register values:\n"); + + seq_printf(s, " bank %u:\n", bank); + + ab8500_registers_print(dev, bank, s); + return 0; +} + static int ab8500_registers_open(struct inode *inode, struct file *file) { - return single_open(file, ab8500_registers_print, inode->i_private); + return single_open(file, ab8500_print_bank_registers, inode->i_private); } static const struct file_operations ab8500_registers_fops = { @@ -405,6 +565,64 @@ static const struct file_operations ab8500_registers_fops = { .owner = THIS_MODULE, }; +static int ab8500_print_all_banks(struct seq_file *s, void *p) +{ + struct device *dev = s->private; + unsigned int i; + int err; + + seq_printf(s, AB8500_NAME_STRING " register values:\n"); + + for (i = 1; i < AB8500_NUM_BANKS; i++) { + err = seq_printf(s, " bank %u:\n", i); + if (err < 0) + dev_err(dev, "seq_printf overflow, bank=%d\n", i); + + ab8500_registers_print(dev, i, s); + } + return 0; +} + +/* Dump registers to kernel log */ +void ab8500_dump_all_banks(struct device *dev) +{ + unsigned int i; + + printk(KERN_INFO"ab8500 register values:\n"); + + for (i = 1; i < AB8500_NUM_BANKS; i++) { + printk(KERN_INFO" bank %u:\n", i); + ab8500_registers_print(dev, i, NULL); + } +} + +static int ab8500_all_banks_open(struct inode *inode, struct file *file) +{ + struct seq_file *s; + int err; + + err = single_open(file, ab8500_print_all_banks, inode->i_private); + if (!err) { + /* Default buf size in seq_read is not enough */ + s = (struct seq_file *)file->private_data; + s->size = (PAGE_SIZE * 2); + s->buf = kmalloc(s->size, GFP_KERNEL); + if (!s->buf) { + single_release(inode, file); + err = -ENOMEM; + } + } + return err; +} + +static const struct file_operations ab8500_all_banks_fops = { + .open = ab8500_all_banks_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + static int ab8500_bank_print(struct seq_file *s, void *p) { return seq_printf(s, "%d\n", debug_bank); @@ -519,6 +737,761 @@ static ssize_t ab8500_val_write(struct file *file, return count; } +/* + * Interrupt status + */ +static u32 num_interrupts[AB8500_MAX_NR_IRQS]; +static int num_interrupt_lines; + +void ab8500_debug_register_interrupt(int line) +{ + if (line < num_interrupt_lines) + num_interrupts[line]++; +} + +static int ab8500_interrupts_print(struct seq_file *s, void *p) +{ + int line; + + seq_printf(s, "irq: number of\n"); + + for (line = 0; line < num_interrupt_lines; line++) + seq_printf(s, "%3i: %6i\n", line, num_interrupts[line]); + + return 0; +} + +static int ab8500_interrupts_open(struct inode *inode, struct file *file) +{ + return single_open(file, ab8500_interrupts_print, inode->i_private); +} + +/* + * - HWREG DB8500 formated routines + */ +static int ab8500_hwreg_print(struct seq_file *s, void *d) +{ + struct device *dev = s->private; + int ret; + u8 regvalue; + + ret = abx500_get_register_interruptible(dev, + (u8)hwreg_cfg.bank, (u8)hwreg_cfg.addr, ®value); + if (ret < 0) { + dev_err(dev, "abx500_get_reg fail %d, %d\n", + ret, __LINE__); + return -EINVAL; + } + + if (hwreg_cfg.shift >= 0) + regvalue >>= hwreg_cfg.shift; + else + regvalue <<= -hwreg_cfg.shift; + regvalue &= hwreg_cfg.mask; + + if (REG_FMT_DEC(&hwreg_cfg)) + seq_printf(s, "%d\n", regvalue); + else + seq_printf(s, "0x%02X\n", regvalue); + return 0; +} + +static int ab8500_hwreg_open(struct inode *inode, struct file *file) +{ + return single_open(file, ab8500_hwreg_print, inode->i_private); +} + +static int ab8500_gpadc_bat_ctrl_print(struct seq_file *s, void *p) +{ + int bat_ctrl_raw; + int bat_ctrl_convert; + struct ab8500_gpadc *gpadc; + + gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + bat_ctrl_raw = ab8500_gpadc_read_raw(gpadc, BAT_CTRL); + bat_ctrl_convert = ab8500_gpadc_ad_to_voltage(gpadc, + BAT_CTRL, bat_ctrl_raw); + + return seq_printf(s, "%d,0x%X\n", + bat_ctrl_convert, bat_ctrl_raw); +} + +static int ab8500_gpadc_bat_ctrl_open(struct inode *inode, struct file *file) +{ + return single_open(file, ab8500_gpadc_bat_ctrl_print, inode->i_private); +} + +static const struct file_operations ab8500_gpadc_bat_ctrl_fops = { + .open = ab8500_gpadc_bat_ctrl_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int ab8500_gpadc_btemp_ball_print(struct seq_file *s, void *p) +{ + int btemp_ball_raw; + int btemp_ball_convert; + struct ab8500_gpadc *gpadc; + + gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + btemp_ball_raw = ab8500_gpadc_read_raw(gpadc, BTEMP_BALL); + btemp_ball_convert = ab8500_gpadc_ad_to_voltage(gpadc, BTEMP_BALL, + btemp_ball_raw); + + return seq_printf(s, + "%d,0x%X\n", btemp_ball_convert, btemp_ball_raw); +} + +static int ab8500_gpadc_btemp_ball_open(struct inode *inode, + struct file *file) +{ + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); +} + +static const struct file_operations ab8500_gpadc_btemp_ball_fops = { + .open = ab8500_gpadc_btemp_ball_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int ab8500_gpadc_main_charger_v_print(struct seq_file *s, void *p) +{ + int main_charger_v_raw; + int main_charger_v_convert; + struct ab8500_gpadc *gpadc; + + gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + main_charger_v_raw = ab8500_gpadc_read_raw(gpadc, MAIN_CHARGER_V); + main_charger_v_convert = ab8500_gpadc_ad_to_voltage(gpadc, + MAIN_CHARGER_V, main_charger_v_raw); + + return seq_printf(s, "%d,0x%X\n", + main_charger_v_convert, main_charger_v_raw); +} + +static int ab8500_gpadc_main_charger_v_open(struct inode *inode, + struct file *file) +{ + return single_open(file, ab8500_gpadc_main_charger_v_print, + inode->i_private); +} + +static const struct file_operations ab8500_gpadc_main_charger_v_fops = { + .open = ab8500_gpadc_main_charger_v_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int ab8500_gpadc_acc_detect1_print(struct seq_file *s, void *p) +{ + int acc_detect1_raw; + int acc_detect1_convert; + struct ab8500_gpadc *gpadc; + + gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + acc_detect1_raw = ab8500_gpadc_read_raw(gpadc, ACC_DETECT1); + acc_detect1_convert = ab8500_gpadc_ad_to_voltage(gpadc, ACC_DETECT1, + acc_detect1_raw); + + return seq_printf(s, "%d,0x%X\n", + acc_detect1_convert, acc_detect1_raw); +} + +static int ab8500_gpadc_acc_detect1_open(struct inode *inode, + struct file *file) +{ + return single_open(file, ab8500_gpadc_acc_detect1_print, + inode->i_private); +} + +static const struct file_operations ab8500_gpadc_acc_detect1_fops = { + .open = ab8500_gpadc_acc_detect1_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int ab8500_gpadc_acc_detect2_print(struct seq_file *s, void *p) +{ + int acc_detect2_raw; + int acc_detect2_convert; + struct ab8500_gpadc *gpadc; + + gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + acc_detect2_raw = ab8500_gpadc_read_raw(gpadc, ACC_DETECT2); + acc_detect2_convert = ab8500_gpadc_ad_to_voltage(gpadc, + ACC_DETECT2, acc_detect2_raw); + + return seq_printf(s, "%d,0x%X\n", + acc_detect2_convert, acc_detect2_raw); +} + +static int ab8500_gpadc_acc_detect2_open(struct inode *inode, + struct file *file) +{ + return single_open(file, ab8500_gpadc_acc_detect2_print, + inode->i_private); +} + +static const struct file_operations ab8500_gpadc_acc_detect2_fops = { + .open = ab8500_gpadc_acc_detect2_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int ab8500_gpadc_aux1_print(struct seq_file *s, void *p) +{ + int aux1_raw; + int aux1_convert; + struct ab8500_gpadc *gpadc; + + gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + aux1_raw = ab8500_gpadc_read_raw(gpadc, ADC_AUX1); + aux1_convert = ab8500_gpadc_ad_to_voltage(gpadc, ADC_AUX1, + aux1_raw); + + return seq_printf(s, "%d,0x%X\n", + aux1_convert, aux1_raw); +} + +static int ab8500_gpadc_aux1_open(struct inode *inode, struct file *file) +{ + return single_open(file, ab8500_gpadc_aux1_print, inode->i_private); +} + +static const struct file_operations ab8500_gpadc_aux1_fops = { + .open = ab8500_gpadc_aux1_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int ab8500_gpadc_aux2_print(struct seq_file *s, void *p) +{ + int aux2_raw; + int aux2_convert; + struct ab8500_gpadc *gpadc; + + gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + aux2_raw = ab8500_gpadc_read_raw(gpadc, ADC_AUX2); + aux2_convert = ab8500_gpadc_ad_to_voltage(gpadc, ADC_AUX2, + aux2_raw); + + return seq_printf(s, "%d,0x%X\n", + aux2_convert, aux2_raw); +} + +static int ab8500_gpadc_aux2_open(struct inode *inode, struct file *file) +{ + return single_open(file, ab8500_gpadc_aux2_print, inode->i_private); +} + +static const struct file_operations ab8500_gpadc_aux2_fops = { + .open = ab8500_gpadc_aux2_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int ab8500_gpadc_main_bat_v_print(struct seq_file *s, void *p) +{ + int main_bat_v_raw; + int main_bat_v_convert; + struct ab8500_gpadc *gpadc; + + gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + main_bat_v_raw = ab8500_gpadc_read_raw(gpadc, MAIN_BAT_V); + main_bat_v_convert = ab8500_gpadc_ad_to_voltage(gpadc, MAIN_BAT_V, + main_bat_v_raw); + + return seq_printf(s, "%d,0x%X\n", + main_bat_v_convert, main_bat_v_raw); +} + +static int ab8500_gpadc_main_bat_v_open(struct inode *inode, + struct file *file) +{ + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); +} + +static const struct file_operations ab8500_gpadc_main_bat_v_fops = { + .open = ab8500_gpadc_main_bat_v_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int ab8500_gpadc_vbus_v_print(struct seq_file *s, void *p) +{ + int vbus_v_raw; + int vbus_v_convert; + struct ab8500_gpadc *gpadc; + + gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + vbus_v_raw = ab8500_gpadc_read_raw(gpadc, VBUS_V); + vbus_v_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBUS_V, + vbus_v_raw); + + return seq_printf(s, "%d,0x%X\n", + vbus_v_convert, vbus_v_raw); +} + +static int ab8500_gpadc_vbus_v_open(struct inode *inode, struct file *file) +{ + return single_open(file, ab8500_gpadc_vbus_v_print, inode->i_private); +} + +static const struct file_operations ab8500_gpadc_vbus_v_fops = { + .open = ab8500_gpadc_vbus_v_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int ab8500_gpadc_main_charger_c_print(struct seq_file *s, void *p) +{ + int main_charger_c_raw; + int main_charger_c_convert; + struct ab8500_gpadc *gpadc; + + gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + main_charger_c_raw = ab8500_gpadc_read_raw(gpadc, MAIN_CHARGER_C); + main_charger_c_convert = ab8500_gpadc_ad_to_voltage(gpadc, + MAIN_CHARGER_C, main_charger_c_raw); + + return seq_printf(s, "%d,0x%X\n", + main_charger_c_convert, main_charger_c_raw); +} + +static int ab8500_gpadc_main_charger_c_open(struct inode *inode, + struct file *file) +{ + return single_open(file, ab8500_gpadc_main_charger_c_print, + inode->i_private); +} + +static const struct file_operations ab8500_gpadc_main_charger_c_fops = { + .open = ab8500_gpadc_main_charger_c_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int ab8500_gpadc_usb_charger_c_print(struct seq_file *s, void *p) +{ + int usb_charger_c_raw; + int usb_charger_c_convert; + struct ab8500_gpadc *gpadc; + + gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + usb_charger_c_raw = ab8500_gpadc_read_raw(gpadc, USB_CHARGER_C); + usb_charger_c_convert = ab8500_gpadc_ad_to_voltage(gpadc, + USB_CHARGER_C, usb_charger_c_raw); + + return seq_printf(s, "%d,0x%X\n", + usb_charger_c_convert, usb_charger_c_raw); +} + +static int ab8500_gpadc_usb_charger_c_open(struct inode *inode, + struct file *file) +{ + return single_open(file, ab8500_gpadc_usb_charger_c_print, + inode->i_private); +} + +static const struct file_operations ab8500_gpadc_usb_charger_c_fops = { + .open = ab8500_gpadc_usb_charger_c_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int ab8500_gpadc_bk_bat_v_print(struct seq_file *s, void *p) +{ + int bk_bat_v_raw; + int bk_bat_v_convert; + struct ab8500_gpadc *gpadc; + + gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + bk_bat_v_raw = ab8500_gpadc_read_raw(gpadc, BK_BAT_V); + bk_bat_v_convert = ab8500_gpadc_ad_to_voltage(gpadc, + BK_BAT_V, bk_bat_v_raw); + + return seq_printf(s, "%d,0x%X\n", + bk_bat_v_convert, bk_bat_v_raw); +} + +static int ab8500_gpadc_bk_bat_v_open(struct inode *inode, struct file *file) +{ + return single_open(file, ab8500_gpadc_bk_bat_v_print, inode->i_private); +} + +static const struct file_operations ab8500_gpadc_bk_bat_v_fops = { + .open = ab8500_gpadc_bk_bat_v_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int ab8500_gpadc_die_temp_print(struct seq_file *s, void *p) +{ + int die_temp_raw; + int die_temp_convert; + struct ab8500_gpadc *gpadc; + + gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + die_temp_raw = ab8500_gpadc_read_raw(gpadc, DIE_TEMP); + die_temp_convert = ab8500_gpadc_ad_to_voltage(gpadc, DIE_TEMP, + die_temp_raw); + + return seq_printf(s, "%d,0x%X\n", + die_temp_convert, die_temp_raw); +} + +static int ab8500_gpadc_die_temp_open(struct inode *inode, struct file *file) +{ + return single_open(file, ab8500_gpadc_die_temp_print, inode->i_private); +} + +static const struct file_operations ab8500_gpadc_die_temp_fops = { + .open = ab8500_gpadc_die_temp_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +/* + * return length of an ASCII numerical value, 0 is string is not a + * numerical value. + * string shall start at value 1st char. + * string can be tailed with \0 or space or newline chars only. + * value can be decimal or hexadecimal (prefixed 0x or 0X). + */ +static int strval_len(char *b) +{ + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { + s += 2; + for (; *s && (*s != ' ') && (*s != '\n'); s++) { + if (!isxdigit(*s)) + return 0; + } + } else { + if (*s == '-') + s++; + for (; *s && (*s != ' ') && (*s != '\n'); s++) { + if (!isdigit(*s)) + return 0; + } + } + return (int) (s-b); +} + +/* + * parse hwreg input data. + * update global hwreg_cfg only if input data syntax is ok. + */ +static ssize_t hwreg_common_write(char *b, struct hwreg_cfg *cfg, + struct device *dev) +{ + uint write, val = 0; + u8 regvalue; + int ret; + struct hwreg_cfg loc = { + .bank = 0, /* default: invalid phys addr */ + .addr = 0, /* default: invalid phys addr */ + .fmt = 0, /* default: 32bit access, hex output */ + .mask = 0xFFFFFFFF, /* default: no mask */ + .shift = 0, /* default: no bit shift */ + }; + + /* read or write ? */ + if (!strncmp(b, "read ", 5)) { + write = 0; + b += 5; + } else if (!strncmp(b, "write ", 6)) { + write = 1; + b += 6; + } else + return -EINVAL; + + /* OPTIONS -l|-w|-b -s -m -o */ + while ((*b == ' ') || (*b == '-')) { + if (*(b-1) != ' ') { + b++; + continue; + } + if ((!strncmp(b, "-d ", 3)) || + (!strncmp(b, "-dec ", 5))) { + b += (*(b+2) == ' ') ? 3 : 5; + loc.fmt |= (1<<0); + } else if ((!strncmp(b, "-h ", 3)) || + (!strncmp(b, "-hex ", 5))) { + b += (*(b+2) == ' ') ? 3 : 5; + loc.fmt &= ~(1<<0); + } else if ((!strncmp(b, "-m ", 3)) || + (!strncmp(b, "-mask ", 6))) { + b += (*(b+2) == ' ') ? 3 : 6; + if (strval_len(b) == 0) + return -EINVAL; + loc.mask = simple_strtoul(b, &b, 0); + } else if ((!strncmp(b, "-s ", 3)) || + (!strncmp(b, "-shift ", 7))) { + b += (*(b+2) == ' ') ? 3 : 7; + if (strval_len(b) == 0) + return -EINVAL; + loc.shift = simple_strtol(b, &b, 0); + } else { + return -EINVAL; + } + } + /* get arg BANK and ADDRESS */ + if (strval_len(b) == 0) + return -EINVAL; + loc.bank = simple_strtoul(b, &b, 0); + while (*b == ' ') + b++; + if (strval_len(b) == 0) + return -EINVAL; + loc.addr = simple_strtoul(b, &b, 0); + + if (write) { + while (*b == ' ') + b++; + if (strval_len(b) == 0) + return -EINVAL; + val = simple_strtoul(b, &b, 0); + } + + /* args are ok, update target cfg (mainly for read) */ + *cfg = loc; + +#ifdef ABB_HWREG_DEBUG + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", + REG_FMT_DEC(cfg) ? "decimal" : "hexa", + cfg->addr, cfg->mask, cfg->shift, val); +#endif + + if (!write) + return 0; + + ret = abx500_get_register_interruptible(dev, + (u8)cfg->bank, (u8)cfg->addr, ®value); + if (ret < 0) { + dev_err(dev, "abx500_get_reg fail %d, %d\n", + ret, __LINE__); + return -EINVAL; + } + + if (cfg->shift >= 0) { + regvalue &= ~(cfg->mask << (cfg->shift)); + val = (val & cfg->mask) << (cfg->shift); + } else { + regvalue &= ~(cfg->mask >> (-cfg->shift)); + val = (val & cfg->mask) >> (-cfg->shift); + } + val = val | regvalue; + + ret = abx500_set_register_interruptible(dev, + (u8)cfg->bank, (u8)cfg->addr, (u8)val); + if (ret < 0) { + pr_err("abx500_set_reg failed %d, %d", ret, __LINE__); + return -EINVAL; + } + + return 0; +} + +static ssize_t ab8500_hwreg_write(struct file *file, + const char __user *user_buf, size_t count, loff_t *ppos) +{ + struct device *dev = ((struct seq_file *)(file->private_data))->private; + char buf[128]; + int buf_size, ret; + + /* Get userspace string and assure termination */ + buf_size = min(count, (sizeof(buf)-1)); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + buf[buf_size] = 0; + + /* get args and process */ + ret = hwreg_common_write(buf, &hwreg_cfg, dev); + return (ret) ? ret : buf_size; +} + +/* + * - irq subscribe/unsubscribe stuff + */ +static int ab8500_subscribe_unsubscribe_print(struct seq_file *s, void *p) +{ + seq_printf(s, "%d\n", irq_first); + + return 0; +} + +static int ab8500_subscribe_unsubscribe_open(struct inode *inode, + struct file *file) +{ + return single_open(file, ab8500_subscribe_unsubscribe_print, + inode->i_private); +} + +/* + * Userspace should use poll() on this file. When an event occur + * the blocking poll will be released. + */ +static ssize_t show_irq(struct device *dev, + struct device_attribute *attr, char *buf) +{ + unsigned long name; + unsigned int irq_index; + int err; + + err = strict_strtoul(attr->attr.name, 0, &name); + if (err) + return err; + + irq_index = name - irq_first; + if (irq_index >= num_irqs) + return -EINVAL; + else + return sprintf(buf, "%u\n", irq_count[irq_index]); +} + +static ssize_t ab8500_subscribe_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct device *dev = ((struct seq_file *)(file->private_data))->private; + char buf[32]; + int buf_size; + unsigned long user_val; + int err; + unsigned int irq_index; + + /* Get userspace string and assure termination */ + buf_size = min(count, (sizeof(buf)-1)); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + buf[buf_size] = 0; + + err = strict_strtoul(buf, 0, &user_val); + if (err) + return -EINVAL; + if (user_val < irq_first) { + dev_err(dev, "debugfs error input < %d\n", irq_first); + return -EINVAL; + } + if (user_val > irq_last) { + dev_err(dev, "debugfs error input > %d\n", irq_last); + return -EINVAL; + } + + irq_index = user_val - irq_first; + if (irq_index >= num_irqs) + return -EINVAL; + + /* + * This will create a sysfs file named which userspace can + * use to select or poll and get the AB8500 events + */ + dev_attr[irq_index] = kmalloc(sizeof(struct device_attribute), + GFP_KERNEL); + event_name[irq_index] = kmalloc(buf_size, GFP_KERNEL); + sprintf(event_name[irq_index], "%lu", user_val); + dev_attr[irq_index]->show = show_irq; + dev_attr[irq_index]->store = NULL; + dev_attr[irq_index]->attr.name = event_name[irq_index]; + dev_attr[irq_index]->attr.mode = S_IRUGO; + err = sysfs_create_file(&dev->kobj, &dev_attr[irq_index]->attr); + if (err < 0) { + printk(KERN_ERR "sysfs_create_file failed %d\n", err); + return err; + } + + err = request_threaded_irq(user_val, NULL, ab8500_debug_handler, + IRQF_SHARED | IRQF_NO_SUSPEND, + "ab8500-debug", &dev->kobj); + if (err < 0) { + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", + err, user_val); + sysfs_remove_file(&dev->kobj, &dev_attr[irq_index]->attr); + return err; + } + + return buf_size; +} + +static ssize_t ab8500_unsubscribe_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct device *dev = ((struct seq_file *)(file->private_data))->private; + char buf[32]; + int buf_size; + unsigned long user_val; + int err; + unsigned int irq_index; + + /* Get userspace string and assure termination */ + buf_size = min(count, (sizeof(buf)-1)); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + buf[buf_size] = 0; + + err = strict_strtoul(buf, 0, &user_val); + if (err) + return -EINVAL; + if (user_val < irq_first) { + dev_err(dev, "debugfs error input < %d\n", irq_first); + return -EINVAL; + } + if (user_val > irq_last) { + dev_err(dev, "debugfs error input > %d\n", irq_last); + return -EINVAL; + } + + irq_index = user_val - irq_first; + if (irq_index >= num_irqs) + return -EINVAL; + + /* Set irq count to 0 when unsubscribe */ + irq_count[irq_index] = 0; + + if (dev_attr[irq_index]) + sysfs_remove_file(&dev->kobj, &dev_attr[irq_index]->attr); + + + free_irq(user_val, &dev->kobj); + kfree(event_name[irq_index]); + kfree(dev_attr[irq_index]); + + return buf_size; +} + +/* + * - several deubgfs nodes fops + */ + static const struct file_operations ab8500_bank_fops = { .open = ab8500_bank_open, .write = ab8500_bank_write, @@ -546,64 +1519,231 @@ static const struct file_operations ab8500_val_fops = { .owner = THIS_MODULE, }; +static const struct file_operations ab8500_interrupts_fops = { + .open = ab8500_interrupts_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static const struct file_operations ab8500_subscribe_fops = { + .open = ab8500_subscribe_unsubscribe_open, + .write = ab8500_subscribe_write, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static const struct file_operations ab8500_unsubscribe_fops = { + .open = ab8500_subscribe_unsubscribe_open, + .write = ab8500_unsubscribe_write, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static const struct file_operations ab8500_hwreg_fops = { + .open = ab8500_hwreg_open, + .write = ab8500_hwreg_write, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + static struct dentry *ab8500_dir; -static struct dentry *ab8500_reg_file; -static struct dentry *ab8500_bank_file; -static struct dentry *ab8500_address_file; -static struct dentry *ab8500_val_file; +static struct dentry *ab8500_gpadc_dir; static int ab8500_debug_probe(struct platform_device *plf) { + struct dentry *file; + int ret = -ENOMEM; + struct ab8500 *ab8500; debug_bank = AB8500_MISC; debug_address = AB8500_REV_REG & 0x00FF; + ab8500 = dev_get_drvdata(plf->dev.parent); + num_irqs = ab8500->mask_size; + + irq_count = kzalloc(sizeof(*irq_count)*num_irqs, GFP_KERNEL); + if (!irq_count) + return -ENOMEM; + + dev_attr = kzalloc(sizeof(*dev_attr)*num_irqs,GFP_KERNEL); + if (!dev_attr) + goto out_freeirq_count; + + event_name = kzalloc(sizeof(*event_name)*num_irqs, GFP_KERNEL); + if (!event_name) + goto out_freedev_attr; + + irq_first = platform_get_irq_byname(plf, "IRQ_FIRST"); + if (irq_first < 0) { + dev_err(&plf->dev, "First irq not found, err %d\n", + irq_first); + ret = irq_first; + goto out_freeevent_name; + } + + irq_last = platform_get_irq_byname(plf, "IRQ_LAST"); + if (irq_last < 0) { + dev_err(&plf->dev, "Last irq not found, err %d\n", + irq_last); + ret = irq_last; + goto out_freeevent_name; + } + ab8500_dir = debugfs_create_dir(AB8500_NAME_STRING, NULL); if (!ab8500_dir) - goto exit_no_debugfs; + goto err; + + ab8500_gpadc_dir = debugfs_create_dir(AB8500_ADC_NAME_STRING, + ab8500_dir); + if (!ab8500_gpadc_dir) + goto err; + + file = debugfs_create_file("all-bank-registers", S_IRUGO, + ab8500_dir, &plf->dev, &ab8500_registers_fops); + if (!file) + goto err; + + file = debugfs_create_file("all-banks", S_IRUGO, + ab8500_dir, &plf->dev, &ab8500_all_banks_fops); + if (!file) + goto err; + + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR), + ab8500_dir, &plf->dev, &ab8500_bank_fops); + if (!file) + goto err; + + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR), + ab8500_dir, &plf->dev, &ab8500_address_fops); + if (!file) + goto err; + + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR), + ab8500_dir, &plf->dev, &ab8500_val_fops); + if (!file) + goto err; - ab8500_reg_file = debugfs_create_file("all-bank-registers", - S_IRUGO, ab8500_dir, &plf->dev, &ab8500_registers_fops); - if (!ab8500_reg_file) - goto exit_destroy_dir; + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR), + ab8500_dir, &plf->dev, &ab8500_subscribe_fops); + if (!file) + goto err; - ab8500_bank_file = debugfs_create_file("register-bank", - (S_IRUGO | S_IWUSR), ab8500_dir, &plf->dev, &ab8500_bank_fops); - if (!ab8500_bank_file) - goto exit_destroy_reg; + if (is_ab8500(ab8500)) + num_interrupt_lines = AB8500_NR_IRQS; + else if (is_ab8505(ab8500)) + num_interrupt_lines = AB8505_NR_IRQS; + else if (is_ab9540(ab8500)) + num_interrupt_lines = AB9540_NR_IRQS; - ab8500_address_file = debugfs_create_file("register-address", - (S_IRUGO | S_IWUSR), ab8500_dir, &plf->dev, - &ab8500_address_fops); - if (!ab8500_address_file) - goto exit_destroy_bank; + file = debugfs_create_file("interrupts", (S_IRUGO), + ab8500_dir, &plf->dev, &ab8500_interrupts_fops); + if (!file) + goto err; - ab8500_val_file = debugfs_create_file("register-value", - (S_IRUGO | S_IWUSR), ab8500_dir, &plf->dev, &ab8500_val_fops); - if (!ab8500_val_file) - goto exit_destroy_address; + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR), + ab8500_dir, &plf->dev, &ab8500_unsubscribe_fops); + if (!file) + goto err; + + file = debugfs_create_file("hwreg", (S_IRUGO | S_IWUSR), + ab8500_dir, &plf->dev, &ab8500_hwreg_fops); + if (!file) + goto err; + + file = debugfs_create_file("bat_ctrl", (S_IRUGO | S_IWUSR), + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_bat_ctrl_fops); + if (!file) + goto err; + + file = debugfs_create_file("btemp_ball", (S_IRUGO | S_IWUSR), + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_btemp_ball_fops); + if (!file) + goto err; + + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR), + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_charger_v_fops); + if (!file) + goto err; + + file = debugfs_create_file("acc_detect1", (S_IRUGO | S_IWUSR), + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_acc_detect1_fops); + if (!file) + goto err; + + file = debugfs_create_file("acc_detect2", (S_IRUGO | S_IWUSR), + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_acc_detect2_fops); + if (!file) + goto err; + + file = debugfs_create_file("adc_aux1", (S_IRUGO | S_IWUSR), + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_aux1_fops); + if (!file) + goto err; + + file = debugfs_create_file("adc_aux2", (S_IRUGO | S_IWUSR), + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_aux2_fops); + if (!file) + goto err; + + file = debugfs_create_file("main_bat_v", (S_IRUGO | S_IWUSR), + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_bat_v_fops); + if (!file) + goto err; + + file = debugfs_create_file("vbus_v", (S_IRUGO | S_IWUSR), + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_vbus_v_fops); + if (!file) + goto err; + + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR), + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_charger_c_fops); + if (!file) + goto err; + + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR), + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_usb_charger_c_fops); + if (!file) + goto err; + + file = debugfs_create_file("bk_bat_v", (S_IRUGO | S_IWUSR), + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_bk_bat_v_fops); + if (!file) + goto err; + + file = debugfs_create_file("die_temp", (S_IRUGO | S_IWUSR), + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_die_temp_fops); + if (!file) + goto err; return 0; -exit_destroy_address: - debugfs_remove(ab8500_address_file); -exit_destroy_bank: - debugfs_remove(ab8500_bank_file); -exit_destroy_reg: - debugfs_remove(ab8500_reg_file); -exit_destroy_dir: - debugfs_remove(ab8500_dir); -exit_no_debugfs: +err: + if (ab8500_dir) + debugfs_remove_recursive(ab8500_dir); dev_err(&plf->dev, "failed to create debugfs entries.\n"); - return -ENOMEM; +out_freeevent_name: + kfree(event_name); +out_freedev_attr: + kfree(dev_attr); +out_freeirq_count: + kfree(irq_count); + + return ret; } static int ab8500_debug_remove(struct platform_device *plf) { - debugfs_remove(ab8500_val_file); - debugfs_remove(ab8500_address_file); - debugfs_remove(ab8500_bank_file); - debugfs_remove(ab8500_reg_file); - debugfs_remove(ab8500_dir); + debugfs_remove_recursive(ab8500_dir); + kfree(event_name); + kfree(dev_attr); + kfree(irq_count); return 0; } diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c index 3fb1f40d6389235e45b35aec393b4bf606a1979c..b1f3561b023f0aaa4939bc469e3c0a40a718d0db 100644 --- a/drivers/mfd/ab8500-gpadc.c +++ b/drivers/mfd/ab8500-gpadc.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -82,6 +83,11 @@ /* This is used to not lose precision when dividing to get gain and offset */ #define CALIB_SCALE 1000 +/* Time in ms before disabling regulator */ +#define GPADC_AUDOSUSPEND_DELAY 1 + +#define CONVERSION_TIME 500 /* ms */ + enum cal_channels { ADC_INPUT_VMAIN = 0, ADC_INPUT_BTEMP, @@ -102,10 +108,10 @@ struct adc_cal_data { /** * struct ab8500_gpadc - AB8500 GPADC device information - * @chip_id ABB chip id * @dev: pointer to the struct device * @node: a list of AB8500 GPADCs, hence prepared for reentrance + * @parent: pointer to the struct ab8500 * @ab8500_gpadc_complete: pointer to the struct completion, to indicate * the completion of gpadc conversion * @ab8500_gpadc_lock: structure of type mutex @@ -114,9 +120,9 @@ struct adc_cal_data { * @cal_data array of ADC calibration data structs */ struct ab8500_gpadc { - u8 chip_id; struct device *dev; struct list_head node; + struct ab8500 *parent; struct completion ab8500_gpadc_complete; struct mutex ab8500_gpadc_lock; struct regulator *regu; @@ -282,8 +288,9 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel) return -ENODEV; mutex_lock(&gpadc->ab8500_gpadc_lock); + /* Enable VTVout LDO this is required for GPADC */ - regulator_enable(gpadc->regu); + pm_runtime_get_sync(gpadc->dev); /* Check if ADC is not busy, lock and proceed */ do { @@ -332,7 +339,7 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel) EN_BUF | EN_ICHAR); break; case BTEMP_BALL: - if (gpadc->chip_id >= AB8500_CUT3P0) { + if (!is_ab8500_2p0_or_earlier(gpadc->parent)) { /* Turn on btemp pull-up on ABB 3.0 */ ret = abx500_mask_and_set_register_interruptible( gpadc->dev, @@ -344,7 +351,7 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel) * Delay might be needed for ABB8500 cut 3.0, if not, remove * when hardware will be available */ - msleep(1); + usleep_range(1000, 1000); break; } /* Intentional fallthrough */ @@ -367,7 +374,8 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel) goto out; } /* wait for completion of conversion */ - if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete, 2*HZ)) { + if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete, + msecs_to_jiffies(CONVERSION_TIME))) { dev_err(gpadc->dev, "timeout: didn't receive GPADC conversion interrupt\n"); ret = -EINVAL; @@ -397,8 +405,10 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel) dev_err(gpadc->dev, "gpadc_conversion: disable gpadc failed\n"); goto out; } - /* Disable VTVout LDO this is required for GPADC */ - regulator_disable(gpadc->regu); + + pm_runtime_mark_last_busy(gpadc->dev); + pm_runtime_put_autosuspend(gpadc->dev); + mutex_unlock(&gpadc->ab8500_gpadc_lock); return (high_data << 8) | low_data; @@ -412,7 +422,9 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel) */ (void) abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC, AB8500_GPADC_CTRL1_REG, DIS_GPADC); - regulator_disable(gpadc->regu); + + pm_runtime_put(gpadc->dev); + mutex_unlock(&gpadc->ab8500_gpadc_lock); dev_err(gpadc->dev, "gpadc_conversion: Failed to AD convert channel %d\n", channel); @@ -571,6 +583,28 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc) gpadc->cal_data[ADC_INPUT_VBAT].offset); } +static int ab8500_gpadc_runtime_suspend(struct device *dev) +{ + struct ab8500_gpadc *gpadc = dev_get_drvdata(dev); + + regulator_disable(gpadc->regu); + return 0; +} + +static int ab8500_gpadc_runtime_resume(struct device *dev) +{ + struct ab8500_gpadc *gpadc = dev_get_drvdata(dev); + + regulator_enable(gpadc->regu); + return 0; +} + +static int ab8500_gpadc_runtime_idle(struct device *dev) +{ + pm_runtime_suspend(dev); + return 0; +} + static int ab8500_gpadc_probe(struct platform_device *pdev) { int ret = 0; @@ -591,6 +625,7 @@ static int ab8500_gpadc_probe(struct platform_device *pdev) } gpadc->dev = &pdev->dev; + gpadc->parent = dev_get_drvdata(pdev->dev.parent); mutex_init(&gpadc->ab8500_gpadc_lock); /* Initialize completion used to notify completion of conversion */ @@ -607,14 +642,6 @@ static int ab8500_gpadc_probe(struct platform_device *pdev) goto fail; } - /* Get Chip ID of the ABB ASIC */ - ret = abx500_get_chip_id(gpadc->dev); - if (ret < 0) { - dev_err(gpadc->dev, "failed to get chip ID\n"); - goto fail_irq; - } - gpadc->chip_id = (u8) ret; - /* VTVout LDO used to power up ab8500-GPADC */ gpadc->regu = regulator_get(&pdev->dev, "vddadc"); if (IS_ERR(gpadc->regu)) { @@ -622,6 +649,16 @@ static int ab8500_gpadc_probe(struct platform_device *pdev) dev_err(gpadc->dev, "failed to get vtvout LDO\n"); goto fail_irq; } + + platform_set_drvdata(pdev, gpadc); + + regulator_enable(gpadc->regu); + + pm_runtime_set_autosuspend_delay(gpadc->dev, GPADC_AUDOSUSPEND_DELAY); + pm_runtime_use_autosuspend(gpadc->dev); + pm_runtime_set_active(gpadc->dev); + pm_runtime_enable(gpadc->dev); + ab8500_gpadc_read_calibration_data(gpadc); list_add_tail(&gpadc->node, &ab8500_gpadc_list); dev_dbg(gpadc->dev, "probe success\n"); @@ -642,19 +679,34 @@ static int ab8500_gpadc_remove(struct platform_device *pdev) list_del(&gpadc->node); /* remove interrupt - completion of Sw ADC conversion */ free_irq(gpadc->irq, gpadc); - /* disable VTVout LDO that is being used by GPADC */ - regulator_put(gpadc->regu); + + pm_runtime_get_sync(gpadc->dev); + pm_runtime_disable(gpadc->dev); + + regulator_disable(gpadc->regu); + + pm_runtime_set_suspended(gpadc->dev); + + pm_runtime_put_noidle(gpadc->dev); + kfree(gpadc); gpadc = NULL; return 0; } +static const struct dev_pm_ops ab8500_gpadc_pm_ops = { + SET_RUNTIME_PM_OPS(ab8500_gpadc_runtime_suspend, + ab8500_gpadc_runtime_resume, + ab8500_gpadc_runtime_idle) +}; + static struct platform_driver ab8500_gpadc_driver = { .probe = ab8500_gpadc_probe, .remove = ab8500_gpadc_remove, .driver = { .name = "ab8500-gpadc", .owner = THIS_MODULE, + .pm = &ab8500_gpadc_pm_ops, }, }; diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c index 8a33b2c7eeadf1ec900ae80ce0755ef37d19fbc4..108fd86552f0329df01bd905f4109882e236ba62 100644 --- a/drivers/mfd/ab8500-sysctrl.c +++ b/drivers/mfd/ab8500-sysctrl.c @@ -7,12 +7,73 @@ #include #include #include +#include +#include +#include +#include #include #include #include static struct device *sysctrl_dev; +void ab8500_power_off(void) +{ + sigset_t old; + sigset_t all; + static char *pss[] = {"ab8500_ac", "ab8500_usb"}; + int i; + bool charger_present = false; + union power_supply_propval val; + struct power_supply *psy; + int ret; + + /* + * If we have a charger connected and we're powering off, + * reboot into charge-only mode. + */ + + for (i = 0; i < ARRAY_SIZE(pss); i++) { + psy = power_supply_get_by_name(pss[i]); + if (!psy) + continue; + + ret = psy->get_property(psy, POWER_SUPPLY_PROP_ONLINE, &val); + + if (!ret && val.intval) { + charger_present = true; + break; + } + } + + if (!charger_present) + goto shutdown; + + /* Check if battery is known */ + psy = power_supply_get_by_name("ab8500_btemp"); + if (psy) { + ret = psy->get_property(psy, POWER_SUPPLY_PROP_TECHNOLOGY, + &val); + if (!ret && val.intval != POWER_SUPPLY_TECHNOLOGY_UNKNOWN) { + printk(KERN_INFO + "Charger \"%s\" is connected with known battery." + " Rebooting.\n", + pss[i]); + machine_restart("charging"); + } + } + +shutdown: + sigfillset(&all); + + if (!sigprocmask(SIG_BLOCK, &all, &old)) { + (void)ab8500_sysctrl_set(AB8500_STW4500CTRL1, + AB8500_STW4500CTRL1_SWOFF | + AB8500_STW4500CTRL1_SWRESET4500N); + (void)sigprocmask(SIG_SETMASK, &old, NULL); + } +} + static inline bool valid_bank(u8 bank) { return ((bank == AB8500_SYS_CTRL1_BLOCK) || @@ -33,6 +94,7 @@ int ab8500_sysctrl_read(u16 reg, u8 *value) return abx500_get_register_interruptible(sysctrl_dev, bank, (u8)(reg & 0xFF), value); } +EXPORT_SYMBOL(ab8500_sysctrl_read); int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value) { @@ -48,10 +110,40 @@ int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value) return abx500_mask_and_set_register_interruptible(sysctrl_dev, bank, (u8)(reg & 0xFF), mask, value); } +EXPORT_SYMBOL(ab8500_sysctrl_write); static int ab8500_sysctrl_probe(struct platform_device *pdev) { + struct ab8500_platform_data *plat; + struct ab8500_sysctrl_platform_data *pdata; + sysctrl_dev = &pdev->dev; + plat = dev_get_platdata(pdev->dev.parent); + if (plat->pm_power_off) + pm_power_off = ab8500_power_off; + + pdata = plat->sysctrl; + + if (pdata) { + int ret, i, j; + + for (i = AB8500_SYSCLKREQ1RFCLKBUF; + i <= AB8500_SYSCLKREQ8RFCLKBUF; i++) { + j = i - AB8500_SYSCLKREQ1RFCLKBUF; + ret = ab8500_sysctrl_write(i, 0xff, + pdata->initial_req_buf_config[j]); + dev_dbg(&pdev->dev, + "Setting SysClkReq%dRfClkBuf 0x%X\n", + j + 1, + pdata->initial_req_buf_config[j]); + if (ret < 0) { + dev_err(&pdev->dev, + "unable to set sysClkReq%dRfClkBuf: " + "%d\n", j + 1, ret); + } + } + } + return 0; } diff --git a/drivers/mfd/abx500-core.c b/drivers/mfd/abx500-core.c index 7ce65f49480f1bfb4b68d7c693a27451e797e27b..9818afba25153b377cf2b64b54b18bccc02f3e2c 100644 --- a/drivers/mfd/abx500-core.c +++ b/drivers/mfd/abx500-core.c @@ -153,6 +153,22 @@ int abx500_startup_irq_enabled(struct device *dev, unsigned int irq) } EXPORT_SYMBOL(abx500_startup_irq_enabled); +void abx500_dump_all_banks(void) +{ + struct abx500_ops *ops; + struct device dummy_child = {0}; + struct abx500_device_entry *dev_entry; + + list_for_each_entry(dev_entry, &abx500_list, list) { + dummy_child.parent = dev_entry->dev; + ops = &dev_entry->ops; + + if ((ops != NULL) && (ops->dump_all_banks != NULL)) + ops->dump_all_banks(&dummy_child); + } +} +EXPORT_SYMBOL(abx500_dump_all_banks); + MODULE_AUTHOR("Mattias Wallin "); MODULE_DESCRIPTION("ABX500 core driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c index 222c03a5ddc0b3d3e9a37af453d4a1745f1b35e3..b562c7bf8a463903bf4b99d0b6c54b9a1358cf4f 100644 --- a/drivers/mfd/arizona-core.c +++ b/drivers/mfd/arizona-core.c @@ -115,7 +115,7 @@ static irqreturn_t arizona_underclocked(int irq, void *data) if (val & ARIZONA_ADC_UNDERCLOCKED_STS) dev_err(arizona->dev, "ADC underclocked\n"); if (val & ARIZONA_MIXER_UNDERCLOCKED_STS) - dev_err(arizona->dev, "Mixer underclocked\n"); + dev_err(arizona->dev, "Mixer dropped sample\n"); return IRQ_HANDLED; } @@ -263,10 +263,36 @@ static int arizona_runtime_suspend(struct device *dev) } #endif +#ifdef CONFIG_PM_SLEEP +static int arizona_resume_noirq(struct device *dev) +{ + struct arizona *arizona = dev_get_drvdata(dev); + + dev_dbg(arizona->dev, "Early resume, disabling IRQ\n"); + disable_irq(arizona->irq); + + return 0; +} + +static int arizona_resume(struct device *dev) +{ + struct arizona *arizona = dev_get_drvdata(dev); + + dev_dbg(arizona->dev, "Late resume, reenabling IRQ\n"); + enable_irq(arizona->irq); + + return 0; +} +#endif + const struct dev_pm_ops arizona_pm_ops = { SET_RUNTIME_PM_OPS(arizona_runtime_suspend, arizona_runtime_resume, NULL) + SET_SYSTEM_SLEEP_PM_OPS(NULL, arizona_resume) +#ifdef CONFIG_PM_SLEEP + .resume_noirq = arizona_resume_noirq, +#endif }; EXPORT_SYMBOL_GPL(arizona_pm_ops); @@ -275,19 +301,19 @@ static struct mfd_cell early_devs[] = { }; static struct mfd_cell wm5102_devs[] = { + { .name = "arizona-micsupp" }, { .name = "arizona-extcon" }, { .name = "arizona-gpio" }, { .name = "arizona-haptics" }, - { .name = "arizona-micsupp" }, { .name = "arizona-pwm" }, { .name = "wm5102-codec" }, }; static struct mfd_cell wm5110_devs[] = { + { .name = "arizona-micsupp" }, { .name = "arizona-extcon" }, { .name = "arizona-gpio" }, { .name = "arizona-haptics" }, - { .name = "arizona-micsupp" }, { .name = "arizona-pwm" }, { .name = "wm5110-codec" }, }; @@ -484,6 +510,29 @@ int arizona_dev_init(struct arizona *arizona) goto err_reset; } + for (i = 0; i < ARIZONA_MAX_MICBIAS; i++) { + if (!arizona->pdata.micbias[i].mV) + continue; + + val = (arizona->pdata.micbias[i].mV - 1500) / 100; + val <<= ARIZONA_MICB1_LVL_SHIFT; + + if (arizona->pdata.micbias[i].ext_cap) + val |= ARIZONA_MICB1_EXT_CAP; + + if (arizona->pdata.micbias[i].discharge) + val |= ARIZONA_MICB1_DISCH; + + if (arizona->pdata.micbias[i].fast_start) + val |= ARIZONA_MICB1_RATE; + + regmap_update_bits(arizona->regmap, + ARIZONA_MIC_BIAS_CTRL_1 + i, + ARIZONA_MICB1_LVL_MASK | + ARIZONA_MICB1_DISCH | + ARIZONA_MICB1_RATE, val); + } + for (i = 0; i < ARIZONA_MAX_INPUT; i++) { /* Default for both is 0 so noop with defaults */ val = arizona->pdata.dmic_ref[i] diff --git a/drivers/mfd/da9052-i2c.c b/drivers/mfd/da9052-i2c.c index 885e567803583a42473ffb532beead311ad68cf2..6a9fec40d018308a39e1ea24b086bfc94dfb77f0 100644 --- a/drivers/mfd/da9052-i2c.c +++ b/drivers/mfd/da9052-i2c.c @@ -60,7 +60,7 @@ static inline bool i2c_safe_reg(unsigned char reg) * This fix is to follow any read or write with a dummy read to a safe * register. */ -int da9052_i2c_fix(struct da9052 *da9052, unsigned char reg) +static int da9052_i2c_fix(struct da9052 *da9052, unsigned char reg) { int val; @@ -85,7 +85,6 @@ int da9052_i2c_fix(struct da9052 *da9052, unsigned char reg) return 0; } -EXPORT_SYMBOL(da9052_i2c_fix); static int da9052_i2c_enable_multiwrite(struct da9052 *da9052) { diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index a2bacf95b59ea543ca46104f9137a72497b89905..21f261bf9e95fd27825a50af02e6e014ec768dea 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include #include @@ -2207,21 +2208,25 @@ int db8500_prcmu_config_a9wdog(u8 num, bool sleep_auto_off) sleep_auto_off ? A9WDOG_AUTO_OFF_EN : A9WDOG_AUTO_OFF_DIS); } +EXPORT_SYMBOL(db8500_prcmu_config_a9wdog); int db8500_prcmu_enable_a9wdog(u8 id) { return prcmu_a9wdog(MB4H_A9WDOG_EN, id, 0, 0, 0); } +EXPORT_SYMBOL(db8500_prcmu_enable_a9wdog); int db8500_prcmu_disable_a9wdog(u8 id) { return prcmu_a9wdog(MB4H_A9WDOG_DIS, id, 0, 0, 0); } +EXPORT_SYMBOL(db8500_prcmu_disable_a9wdog); int db8500_prcmu_kick_a9wdog(u8 id) { return prcmu_a9wdog(MB4H_A9WDOG_KICK, id, 0, 0, 0); } +EXPORT_SYMBOL(db8500_prcmu_kick_a9wdog); /* * timeout is 28 bit, in ms. @@ -2239,6 +2244,7 @@ int db8500_prcmu_load_a9wdog(u8 id, u32 timeout) (u8)((timeout >> 12) & 0xff), (u8)((timeout >> 20) & 0xff)); } +EXPORT_SYMBOL(db8500_prcmu_load_a9wdog); /** * prcmu_abb_read() - Read register value(s) from the ABB. @@ -3094,6 +3100,11 @@ static struct resource ab8500_resources[] = { } }; +static struct ux500_wdt_data db8500_wdt_pdata = { + .timeout = 600, /* 10 minutes */ + .has_28_bits_resolution = true, +}; + static struct mfd_cell db8500_prcmu_devs[] = { { .name = "db8500-prcmu-regulators", @@ -3107,6 +3118,12 @@ static struct mfd_cell db8500_prcmu_devs[] = { .platform_data = &db8500_cpufreq_table, .pdata_size = sizeof(db8500_cpufreq_table), }, + { + .name = "ux500_wdt", + .platform_data = &db8500_wdt_pdata, + .pdata_size = sizeof(db8500_wdt_pdata), + .id = -1, + }, { .name = "ab8500-core", .of_compatible = "stericsson,ab8500", diff --git a/drivers/mfd/lpc_ich.c b/drivers/mfd/lpc_ich.c index d9d930302e98123c756e47477ca95cac0acebc59..9f12f91d6296e6793dca0a5f29e07c8a6621b314 100644 --- a/drivers/mfd/lpc_ich.c +++ b/drivers/mfd/lpc_ich.c @@ -50,6 +50,7 @@ * document number TBD : Panther Point * document number TBD : Lynx Point * document number TBD : Lynx Point-LP + * document number TBD : Wellsburg */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt @@ -75,8 +76,10 @@ #define ACPIBASE_GCS_OFF 0x3410 #define ACPIBASE_GCS_END 0x3414 -#define GPIOBASE 0x48 -#define GPIOCTRL 0x4C +#define GPIOBASE_ICH0 0x58 +#define GPIOCTRL_ICH0 0x5C +#define GPIOBASE_ICH6 0x48 +#define GPIOCTRL_ICH6 0x4C #define RCBABASE 0xf0 @@ -84,8 +87,17 @@ #define wdt_mem_res(i) wdt_res(ICH_RES_MEM_OFF, i) #define wdt_res(b, i) (&wdt_ich_res[(b) + (i)]) -static int lpc_ich_acpi_save = -1; -static int lpc_ich_gpio_save = -1; +struct lpc_ich_cfg { + int base; + int ctrl; + int save; +}; + +struct lpc_ich_priv { + int chipset; + struct lpc_ich_cfg acpi; + struct lpc_ich_cfg gpio; +}; static struct resource wdt_ich_res[] = { /* ACPI - TCO */ @@ -194,6 +206,7 @@ enum lpc_chipsets { LPC_PPT, /* Panther Point */ LPC_LPT, /* Lynx Point */ LPC_LPT_LP, /* Lynx Point-LP */ + LPC_WBG, /* Wellsburg */ }; struct lpc_ich_info lpc_chipset_info[] = { @@ -474,6 +487,10 @@ struct lpc_ich_info lpc_chipset_info[] = { .name = "Lynx Point_LP", .iTCO_version = 2, }, + [LPC_WBG] = { + .name = "Wellsburg", + .iTCO_version = 2, + }, }; /* @@ -655,45 +672,82 @@ static DEFINE_PCI_DEVICE_TABLE(lpc_ich_ids) = { { PCI_VDEVICE(INTEL, 0x9c45), LPC_LPT_LP}, { PCI_VDEVICE(INTEL, 0x9c46), LPC_LPT_LP}, { PCI_VDEVICE(INTEL, 0x9c47), LPC_LPT_LP}, + { PCI_VDEVICE(INTEL, 0x8d40), LPC_WBG}, + { PCI_VDEVICE(INTEL, 0x8d41), LPC_WBG}, + { PCI_VDEVICE(INTEL, 0x8d42), LPC_WBG}, + { PCI_VDEVICE(INTEL, 0x8d43), LPC_WBG}, + { PCI_VDEVICE(INTEL, 0x8d44), LPC_WBG}, + { PCI_VDEVICE(INTEL, 0x8d45), LPC_WBG}, + { PCI_VDEVICE(INTEL, 0x8d46), LPC_WBG}, + { PCI_VDEVICE(INTEL, 0x8d47), LPC_WBG}, + { PCI_VDEVICE(INTEL, 0x8d48), LPC_WBG}, + { PCI_VDEVICE(INTEL, 0x8d49), LPC_WBG}, + { PCI_VDEVICE(INTEL, 0x8d4a), LPC_WBG}, + { PCI_VDEVICE(INTEL, 0x8d4b), LPC_WBG}, + { PCI_VDEVICE(INTEL, 0x8d4c), LPC_WBG}, + { PCI_VDEVICE(INTEL, 0x8d4d), LPC_WBG}, + { PCI_VDEVICE(INTEL, 0x8d4e), LPC_WBG}, + { PCI_VDEVICE(INTEL, 0x8d4f), LPC_WBG}, + { PCI_VDEVICE(INTEL, 0x8d50), LPC_WBG}, + { PCI_VDEVICE(INTEL, 0x8d51), LPC_WBG}, + { PCI_VDEVICE(INTEL, 0x8d52), LPC_WBG}, + { PCI_VDEVICE(INTEL, 0x8d53), LPC_WBG}, + { PCI_VDEVICE(INTEL, 0x8d54), LPC_WBG}, + { PCI_VDEVICE(INTEL, 0x8d55), LPC_WBG}, + { PCI_VDEVICE(INTEL, 0x8d56), LPC_WBG}, + { PCI_VDEVICE(INTEL, 0x8d57), LPC_WBG}, + { PCI_VDEVICE(INTEL, 0x8d58), LPC_WBG}, + { PCI_VDEVICE(INTEL, 0x8d59), LPC_WBG}, + { PCI_VDEVICE(INTEL, 0x8d5a), LPC_WBG}, + { PCI_VDEVICE(INTEL, 0x8d5b), LPC_WBG}, + { PCI_VDEVICE(INTEL, 0x8d5c), LPC_WBG}, + { PCI_VDEVICE(INTEL, 0x8d5d), LPC_WBG}, + { PCI_VDEVICE(INTEL, 0x8d5e), LPC_WBG}, + { PCI_VDEVICE(INTEL, 0x8d5f), LPC_WBG}, { 0, }, /* End of list */ }; MODULE_DEVICE_TABLE(pci, lpc_ich_ids); static void lpc_ich_restore_config_space(struct pci_dev *dev) { - if (lpc_ich_acpi_save >= 0) { - pci_write_config_byte(dev, ACPICTRL, lpc_ich_acpi_save); - lpc_ich_acpi_save = -1; + struct lpc_ich_priv *priv = pci_get_drvdata(dev); + + if (priv->acpi.save >= 0) { + pci_write_config_byte(dev, priv->acpi.ctrl, priv->acpi.save); + priv->acpi.save = -1; } - if (lpc_ich_gpio_save >= 0) { - pci_write_config_byte(dev, GPIOCTRL, lpc_ich_gpio_save); - lpc_ich_gpio_save = -1; + if (priv->gpio.save >= 0) { + pci_write_config_byte(dev, priv->gpio.ctrl, priv->gpio.save); + priv->gpio.save = -1; } } static void lpc_ich_enable_acpi_space(struct pci_dev *dev) { + struct lpc_ich_priv *priv = pci_get_drvdata(dev); u8 reg_save; - pci_read_config_byte(dev, ACPICTRL, ®_save); - pci_write_config_byte(dev, ACPICTRL, reg_save | 0x10); - lpc_ich_acpi_save = reg_save; + pci_read_config_byte(dev, priv->acpi.ctrl, ®_save); + pci_write_config_byte(dev, priv->acpi.ctrl, reg_save | 0x10); + priv->acpi.save = reg_save; } static void lpc_ich_enable_gpio_space(struct pci_dev *dev) { + struct lpc_ich_priv *priv = pci_get_drvdata(dev); u8 reg_save; - pci_read_config_byte(dev, GPIOCTRL, ®_save); - pci_write_config_byte(dev, GPIOCTRL, reg_save | 0x10); - lpc_ich_gpio_save = reg_save; + pci_read_config_byte(dev, priv->gpio.ctrl, ®_save); + pci_write_config_byte(dev, priv->gpio.ctrl, reg_save | 0x10); + priv->gpio.save = reg_save; } -static void lpc_ich_finalize_cell(struct mfd_cell *cell, - const struct pci_device_id *id) +static void lpc_ich_finalize_cell(struct pci_dev *dev, struct mfd_cell *cell) { - cell->platform_data = &lpc_chipset_info[id->driver_data]; + struct lpc_ich_priv *priv = pci_get_drvdata(dev); + + cell->platform_data = &lpc_chipset_info[priv->chipset]; cell->pdata_size = sizeof(struct lpc_ich_info); } @@ -721,9 +775,9 @@ static int lpc_ich_check_conflict_gpio(struct resource *res) return use_gpio ? use_gpio : ret; } -static int lpc_ich_init_gpio(struct pci_dev *dev, - const struct pci_device_id *id) +static int lpc_ich_init_gpio(struct pci_dev *dev) { + struct lpc_ich_priv *priv = pci_get_drvdata(dev); u32 base_addr_cfg; u32 base_addr; int ret; @@ -731,7 +785,7 @@ static int lpc_ich_init_gpio(struct pci_dev *dev, struct resource *res; /* Setup power management base register */ - pci_read_config_dword(dev, ACPIBASE, &base_addr_cfg); + pci_read_config_dword(dev, priv->acpi.base, &base_addr_cfg); base_addr = base_addr_cfg & 0x0000ff80; if (!base_addr) { dev_notice(&dev->dev, "I/O space for ACPI uninitialized\n"); @@ -757,7 +811,7 @@ static int lpc_ich_init_gpio(struct pci_dev *dev, gpe0_done: /* Setup GPIO base register */ - pci_read_config_dword(dev, GPIOBASE, &base_addr_cfg); + pci_read_config_dword(dev, priv->gpio.base, &base_addr_cfg); base_addr = base_addr_cfg & 0x0000ff80; if (!base_addr) { dev_notice(&dev->dev, "I/O space for GPIO uninitialized\n"); @@ -768,7 +822,7 @@ static int lpc_ich_init_gpio(struct pci_dev *dev, /* Older devices provide fewer GPIO and have a smaller resource size. */ res = &gpio_ich_res[ICH_RES_GPIO]; res->start = base_addr; - switch (lpc_chipset_info[id->driver_data].gpio_version) { + switch (lpc_chipset_info[priv->chipset].gpio_version) { case ICH_V5_GPIO: case ICH_V10CORP_GPIO: res->end = res->start + 128 - 1; @@ -784,10 +838,10 @@ static int lpc_ich_init_gpio(struct pci_dev *dev, acpi_conflict = true; goto gpio_done; } - lpc_chipset_info[id->driver_data].use_gpio = ret; + lpc_chipset_info[priv->chipset].use_gpio = ret; lpc_ich_enable_gpio_space(dev); - lpc_ich_finalize_cell(&lpc_ich_cells[LPC_GPIO], id); + lpc_ich_finalize_cell(dev, &lpc_ich_cells[LPC_GPIO]); ret = mfd_add_devices(&dev->dev, -1, &lpc_ich_cells[LPC_GPIO], 1, NULL, 0, NULL); @@ -798,16 +852,16 @@ static int lpc_ich_init_gpio(struct pci_dev *dev, return ret; } -static int lpc_ich_init_wdt(struct pci_dev *dev, - const struct pci_device_id *id) +static int lpc_ich_init_wdt(struct pci_dev *dev) { + struct lpc_ich_priv *priv = pci_get_drvdata(dev); u32 base_addr_cfg; u32 base_addr; int ret; struct resource *res; /* Setup power management base register */ - pci_read_config_dword(dev, ACPIBASE, &base_addr_cfg); + pci_read_config_dword(dev, priv->acpi.base, &base_addr_cfg); base_addr = base_addr_cfg & 0x0000ff80; if (!base_addr) { dev_notice(&dev->dev, "I/O space for ACPI uninitialized\n"); @@ -830,7 +884,7 @@ static int lpc_ich_init_wdt(struct pci_dev *dev, * we have to read RCBA from PCI Config space 0xf0 and use * it as base. GCS = RCBA + ICH6_GCS(0x3410). */ - if (lpc_chipset_info[id->driver_data].iTCO_version == 1) { + if (lpc_chipset_info[priv->chipset].iTCO_version == 1) { /* Don't register iomem for TCO ver 1 */ lpc_ich_cells[LPC_WDT].num_resources--; } else { @@ -847,7 +901,7 @@ static int lpc_ich_init_wdt(struct pci_dev *dev, res->end = base_addr + ACPIBASE_GCS_END; } - lpc_ich_finalize_cell(&lpc_ich_cells[LPC_WDT], id); + lpc_ich_finalize_cell(dev, &lpc_ich_cells[LPC_WDT]); ret = mfd_add_devices(&dev->dev, -1, &lpc_ich_cells[LPC_WDT], 1, NULL, 0, NULL); @@ -858,14 +912,36 @@ static int lpc_ich_init_wdt(struct pci_dev *dev, static int lpc_ich_probe(struct pci_dev *dev, const struct pci_device_id *id) { + struct lpc_ich_priv *priv; int ret; bool cell_added = false; - ret = lpc_ich_init_wdt(dev, id); + priv = devm_kzalloc(&dev->dev, + sizeof(struct lpc_ich_priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->chipset = id->driver_data; + priv->acpi.save = -1; + priv->acpi.base = ACPIBASE; + priv->acpi.ctrl = ACPICTRL; + + priv->gpio.save = -1; + if (priv->chipset <= LPC_ICH5) { + priv->gpio.base = GPIOBASE_ICH0; + priv->gpio.ctrl = GPIOCTRL_ICH0; + } else { + priv->gpio.base = GPIOBASE_ICH6; + priv->gpio.ctrl = GPIOCTRL_ICH6; + } + + pci_set_drvdata(dev, priv); + + ret = lpc_ich_init_wdt(dev); if (!ret) cell_added = true; - ret = lpc_ich_init_gpio(dev, id); + ret = lpc_ich_init_gpio(dev); if (!ret) cell_added = true; @@ -876,6 +952,7 @@ static int lpc_ich_probe(struct pci_dev *dev, if (!cell_added) { dev_warn(&dev->dev, "No MFD cells added\n"); lpc_ich_restore_config_space(dev); + pci_set_drvdata(dev, NULL); return -ENODEV; } @@ -886,6 +963,7 @@ static void lpc_ich_remove(struct pci_dev *dev) { mfd_remove_devices(&dev->dev); lpc_ich_restore_config_space(dev); + pci_set_drvdata(dev, NULL); } static struct pci_driver lpc_ich_driver = { diff --git a/drivers/mfd/lpc_sch.c b/drivers/mfd/lpc_sch.c index 5624fcbba69b939b77468679b40ed16e59f1d1fa..8cc6aac27cb2d5ef77b0c7894dc9670afcfae4a8 100644 --- a/drivers/mfd/lpc_sch.c +++ b/drivers/mfd/lpc_sch.c @@ -45,34 +45,32 @@ static struct resource smbus_sch_resource = { .flags = IORESOURCE_IO, }; - static struct resource gpio_sch_resource = { .flags = IORESOURCE_IO, }; -static struct mfd_cell lpc_sch_cells[] = { - { - .name = "isch_smbus", - .num_resources = 1, - .resources = &smbus_sch_resource, - }, - { - .name = "sch_gpio", - .num_resources = 1, - .resources = &gpio_sch_resource, - }, -}; - static struct resource wdt_sch_resource = { .flags = IORESOURCE_IO, }; -static struct mfd_cell tunnelcreek_cells[] = { - { - .name = "ie6xx_wdt", - .num_resources = 1, - .resources = &wdt_sch_resource, - }, +static struct mfd_cell lpc_sch_cells[3]; + +static struct mfd_cell isch_smbus_cell = { + .name = "isch_smbus", + .num_resources = 1, + .resources = &smbus_sch_resource, +}; + +static struct mfd_cell sch_gpio_cell = { + .name = "sch_gpio", + .num_resources = 1, + .resources = &gpio_sch_resource, +}; + +static struct mfd_cell wdt_sch_cell = { + .name = "ie6xx_wdt", + .num_resources = 1, + .resources = &wdt_sch_resource, }; static DEFINE_PCI_DEVICE_TABLE(lpc_sch_ids) = { @@ -88,79 +86,76 @@ static int lpc_sch_probe(struct pci_dev *dev, { unsigned int base_addr_cfg; unsigned short base_addr; - int i; + int i, cells = 0; int ret; pci_read_config_dword(dev, SMBASE, &base_addr_cfg); - if (!(base_addr_cfg & (1 << 31))) { - dev_err(&dev->dev, "Decode of the SMBus I/O range disabled\n"); - return -ENODEV; - } - base_addr = (unsigned short)base_addr_cfg; - if (base_addr == 0) { - dev_err(&dev->dev, "I/O space for SMBus uninitialized\n"); - return -ENODEV; - } - - smbus_sch_resource.start = base_addr; - smbus_sch_resource.end = base_addr + SMBUS_IO_SIZE - 1; + base_addr = 0; + if (!(base_addr_cfg & (1 << 31))) + dev_warn(&dev->dev, "Decode of the SMBus I/O range disabled\n"); + else + base_addr = (unsigned short)base_addr_cfg; - pci_read_config_dword(dev, GPIOBASE, &base_addr_cfg); - if (!(base_addr_cfg & (1 << 31))) { - dev_err(&dev->dev, "Decode of the GPIO I/O range disabled\n"); - return -ENODEV; - } - base_addr = (unsigned short)base_addr_cfg; if (base_addr == 0) { - dev_err(&dev->dev, "I/O space for GPIO uninitialized\n"); - return -ENODEV; + dev_warn(&dev->dev, "I/O space for SMBus uninitialized\n"); + } else { + lpc_sch_cells[cells++] = isch_smbus_cell; + smbus_sch_resource.start = base_addr; + smbus_sch_resource.end = base_addr + SMBUS_IO_SIZE - 1; } - gpio_sch_resource.start = base_addr; - - if (id->device == PCI_DEVICE_ID_INTEL_CENTERTON_ILB) - gpio_sch_resource.end = base_addr + GPIO_IO_SIZE_CENTERTON - 1; + pci_read_config_dword(dev, GPIOBASE, &base_addr_cfg); + base_addr = 0; + if (!(base_addr_cfg & (1 << 31))) + dev_warn(&dev->dev, "Decode of the GPIO I/O range disabled\n"); else - gpio_sch_resource.end = base_addr + GPIO_IO_SIZE - 1; - - for (i=0; i < ARRAY_SIZE(lpc_sch_cells); i++) - lpc_sch_cells[i].id = id->device; + base_addr = (unsigned short)base_addr_cfg; - ret = mfd_add_devices(&dev->dev, 0, - lpc_sch_cells, ARRAY_SIZE(lpc_sch_cells), NULL, - 0, NULL); - if (ret) - goto out_dev; + if (base_addr == 0) { + dev_warn(&dev->dev, "I/O space for GPIO uninitialized\n"); + } else { + lpc_sch_cells[cells++] = sch_gpio_cell; + gpio_sch_resource.start = base_addr; + if (id->device == PCI_DEVICE_ID_INTEL_CENTERTON_ILB) + gpio_sch_resource.end = base_addr + GPIO_IO_SIZE_CENTERTON - 1; + else + gpio_sch_resource.end = base_addr + GPIO_IO_SIZE - 1; + } if (id->device == PCI_DEVICE_ID_INTEL_ITC_LPC - || id->device == PCI_DEVICE_ID_INTEL_CENTERTON_ILB) { + || id->device == PCI_DEVICE_ID_INTEL_CENTERTON_ILB) { pci_read_config_dword(dev, WDTBASE, &base_addr_cfg); - if (!(base_addr_cfg & (1 << 31))) { - dev_err(&dev->dev, "Decode of the WDT I/O range disabled\n"); - ret = -ENODEV; - goto out_dev; + base_addr = 0; + if (!(base_addr_cfg & (1 << 31))) + dev_warn(&dev->dev, "Decode of the WDT I/O range disabled\n"); + else + base_addr = (unsigned short)base_addr_cfg; + if (base_addr == 0) + dev_warn(&dev->dev, "I/O space for WDT uninitialized\n"); + else { + lpc_sch_cells[cells++] = wdt_sch_cell; + wdt_sch_resource.start = base_addr; + wdt_sch_resource.end = base_addr + WDT_IO_SIZE - 1; } - base_addr = (unsigned short)base_addr_cfg; - if (base_addr == 0) { - dev_err(&dev->dev, "I/O space for WDT uninitialized\n"); - ret = -ENODEV; - goto out_dev; - } - - wdt_sch_resource.start = base_addr; - wdt_sch_resource.end = base_addr + WDT_IO_SIZE - 1; + } - for (i = 0; i < ARRAY_SIZE(tunnelcreek_cells); i++) - tunnelcreek_cells[i].id = id->device; + if (WARN_ON(cells > ARRAY_SIZE(lpc_sch_cells))) { + dev_err(&dev->dev, "Cell count exceeds array size"); + return -ENODEV; + } - ret = mfd_add_devices(&dev->dev, 0, tunnelcreek_cells, - ARRAY_SIZE(tunnelcreek_cells), NULL, - 0, NULL); + if (cells == 0) { + dev_err(&dev->dev, "All decode registers disabled.\n"); + return -ENODEV; } - return ret; -out_dev: - mfd_remove_devices(&dev->dev); + for (i = 0; i < cells; i++) + lpc_sch_cells[i].id = id->device; + + ret = mfd_add_devices(&dev->dev, 0, lpc_sch_cells, cells, NULL, 0, NULL); + if (ret) + mfd_remove_devices(&dev->dev); + return ret; } diff --git a/drivers/mfd/max8925-core.c b/drivers/mfd/max8925-core.c index e32466e865b92134b0d2355c7ff721198945bb0b..f0cc40296d8ccc50fab35f0805023bdab6ebc54f 100644 --- a/drivers/mfd/max8925-core.c +++ b/drivers/mfd/max8925-core.c @@ -14,10 +14,13 @@ #include #include #include +#include #include #include #include #include +#include +#include static struct resource bk_resources[] = { { 0x84, 0x84, "mode control", IORESOURCE_REG, }, @@ -639,17 +642,33 @@ static struct irq_chip max8925_irq_chip = { .irq_disable = max8925_irq_disable, }; +static int max8925_irq_domain_map(struct irq_domain *d, unsigned int virq, + irq_hw_number_t hw) +{ + irq_set_chip_data(virq, d->host_data); + irq_set_chip_and_handler(virq, &max8925_irq_chip, handle_edge_irq); + irq_set_nested_thread(virq, 1); +#ifdef CONFIG_ARM + set_irq_flags(virq, IRQF_VALID); +#else + irq_set_noprobe(virq); +#endif + return 0; +} + +static struct irq_domain_ops max8925_irq_domain_ops = { + .map = max8925_irq_domain_map, + .xlate = irq_domain_xlate_onetwocell, +}; + + static int max8925_irq_init(struct max8925_chip *chip, int irq, struct max8925_platform_data *pdata) { unsigned long flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT; - int i, ret; - int __irq; + int ret; + struct device_node *node = chip->dev->of_node; - if (!pdata || !pdata->irq_base) { - dev_warn(chip->dev, "No interrupt support on IRQ base\n"); - return -EINVAL; - } /* clear all interrupts */ max8925_reg_read(chip->i2c, MAX8925_CHG_IRQ1); max8925_reg_read(chip->i2c, MAX8925_CHG_IRQ2); @@ -667,35 +686,30 @@ static int max8925_irq_init(struct max8925_chip *chip, int irq, max8925_reg_write(chip->rtc, MAX8925_RTC_IRQ_MASK, 0xff); mutex_init(&chip->irq_lock); - chip->core_irq = irq; - chip->irq_base = pdata->irq_base; - - /* register with genirq */ - for (i = 0; i < ARRAY_SIZE(max8925_irqs); i++) { - __irq = i + chip->irq_base; - irq_set_chip_data(__irq, chip); - irq_set_chip_and_handler(__irq, &max8925_irq_chip, - handle_edge_irq); - irq_set_nested_thread(__irq, 1); -#ifdef CONFIG_ARM - set_irq_flags(__irq, IRQF_VALID); -#else - irq_set_noprobe(__irq); -#endif - } - if (!irq) { - dev_warn(chip->dev, "No interrupt support on core IRQ\n"); - goto tsc_irq; + chip->irq_base = irq_alloc_descs(-1, 0, MAX8925_NR_IRQS, 0); + if (chip->irq_base < 0) { + dev_err(chip->dev, "Failed to allocate interrupts, ret:%d\n", + chip->irq_base); + return -EBUSY; } + irq_domain_add_legacy(node, MAX8925_NR_IRQS, chip->irq_base, 0, + &max8925_irq_domain_ops, chip); + + /* request irq handler for pmic main irq*/ + chip->core_irq = irq; + if (!chip->core_irq) + return -EBUSY; ret = request_threaded_irq(irq, NULL, max8925_irq, flags | IRQF_ONESHOT, "max8925", chip); if (ret) { dev_err(chip->dev, "Failed to request core IRQ: %d\n", ret); chip->core_irq = 0; + return -EBUSY; } -tsc_irq: + /* request irq handler for pmic tsc irq*/ + /* mask TSC interrupt */ max8925_reg_write(chip->adc, MAX8925_TSC_IRQ_MASK, 0x0f); @@ -704,7 +718,6 @@ static int max8925_irq_init(struct max8925_chip *chip, int irq, return 0; } chip->tsc_irq = pdata->tsc_irq; - ret = request_threaded_irq(chip->tsc_irq, NULL, max8925_tsc_irq, flags | IRQF_ONESHOT, "max8925-tsc", chip); if (ret) { @@ -846,7 +859,7 @@ int max8925_device_init(struct max8925_chip *chip, ret = mfd_add_devices(chip->dev, 0, &rtc_devs[0], ARRAY_SIZE(rtc_devs), - &rtc_resources[0], chip->irq_base, NULL); + NULL, chip->irq_base, NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add rtc subdev\n"); goto out; @@ -854,7 +867,7 @@ int max8925_device_init(struct max8925_chip *chip, ret = mfd_add_devices(chip->dev, 0, &onkey_devs[0], ARRAY_SIZE(onkey_devs), - &onkey_resources[0], 0, NULL); + NULL, chip->irq_base, NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add onkey subdev\n"); goto out_dev; @@ -873,21 +886,19 @@ int max8925_device_init(struct max8925_chip *chip, goto out_dev; } - if (pdata && pdata->power) { - ret = mfd_add_devices(chip->dev, 0, &power_devs[0], - ARRAY_SIZE(power_devs), - &power_supply_resources[0], 0, NULL); - if (ret < 0) { - dev_err(chip->dev, "Failed to add power supply " - "subdev\n"); - goto out_dev; - } + ret = mfd_add_devices(chip->dev, 0, &power_devs[0], + ARRAY_SIZE(power_devs), + NULL, 0, NULL); + if (ret < 0) { + dev_err(chip->dev, + "Failed to add power supply subdev, err = %d\n", ret); + goto out_dev; } if (pdata && pdata->touch) { ret = mfd_add_devices(chip->dev, 0, &touch_devs[0], ARRAY_SIZE(touch_devs), - &touch_resources[0], 0, NULL); + NULL, chip->tsc_irq, NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add touch subdev\n"); goto out_dev; diff --git a/drivers/mfd/max8925-i2c.c b/drivers/mfd/max8925-i2c.c index 00b5b456063df380fe88eb97144adb8d1282bfb9..92bbebd31598815659e667d890a846249b37db8b 100644 --- a/drivers/mfd/max8925-i2c.c +++ b/drivers/mfd/max8925-i2c.c @@ -135,13 +135,37 @@ static const struct i2c_device_id max8925_id_table[] = { }; MODULE_DEVICE_TABLE(i2c, max8925_id_table); +static int max8925_dt_init(struct device_node *np, struct device *dev, + struct max8925_platform_data *pdata) +{ + int ret; + + ret = of_property_read_u32(np, "maxim,tsc-irq", &pdata->tsc_irq); + if (ret) { + dev_err(dev, "Not found maxim,tsc-irq property\n"); + return -EINVAL; + } + return 0; +} + static int max8925_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct max8925_platform_data *pdata = client->dev.platform_data; static struct max8925_chip *chip; - - if (!pdata) { + struct device_node *node = client->dev.of_node; + + if (node && !pdata) { + /* parse DT to get platform data */ + pdata = devm_kzalloc(&client->dev, + sizeof(struct max8925_platform_data), + GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + if (max8925_dt_init(node, &client->dev, pdata)) + return -EINVAL; + } else if (!pdata) { pr_info("%s: platform data is missing\n", __func__); return -EINVAL; } @@ -203,11 +227,18 @@ static int max8925_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(max8925_pm_ops, max8925_suspend, max8925_resume); +static const struct of_device_id max8925_dt_ids[] = { + { .compatible = "maxim,max8925", }, + {}, +}; +MODULE_DEVICE_TABLE(of, max8925_dt_ids); + static struct i2c_driver max8925_driver = { .driver = { .name = "max8925", .owner = THIS_MODULE, .pm = &max8925_pm_ops, + .of_match_table = of_match_ptr(max8925_dt_ids), }, .probe = max8925_probe, .remove = max8925_remove, @@ -217,7 +248,6 @@ static struct i2c_driver max8925_driver = { static int __init max8925_i2c_init(void) { int ret; - ret = i2c_add_driver(&max8925_driver); if (ret != 0) pr_err("Failed to register MAX8925 I2C driver: %d\n", ret); diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index 05164d7f054b86ccfd6625cc21da545212d5983d..6b5edf64de2b3a4eafbdc0ace93a5a4bd2d4caea 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -23,7 +23,6 @@ #include #include #include -#include #include #include #include @@ -91,21 +90,23 @@ struct usbhs_hcd_omap { + int nports; + struct clk **utmi_clk; + struct clk **hsic60m_clk; + struct clk **hsic480m_clk; + struct clk *xclk60mhsp1_ck; struct clk *xclk60mhsp2_ck; - struct clk *utmi_p1_fck; - struct clk *usbhost_p1_fck; - struct clk *utmi_p2_fck; - struct clk *usbhost_p2_fck; + struct clk *utmi_p1_gfclk; + struct clk *utmi_p2_gfclk; struct clk *init_60m_fclk; struct clk *ehci_logic_fck; void __iomem *uhh_base; - struct usbhs_omap_platform_data platdata; + struct usbhs_omap_platform_data *pdata; u32 usbhs_rev; - spinlock_t lock; }; /*-------------------------------------------------------------------------*/ @@ -184,19 +185,13 @@ static struct platform_device *omap_usbhs_alloc_child(const char *name, static int omap_usbhs_alloc_children(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct usbhs_hcd_omap *omap; - struct ehci_hcd_omap_platform_data *ehci_data; - struct ohci_hcd_omap_platform_data *ohci_data; + struct usbhs_omap_platform_data *pdata = dev->platform_data; struct platform_device *ehci; struct platform_device *ohci; struct resource *res; struct resource resources[2]; int ret; - omap = platform_get_drvdata(pdev); - ehci_data = omap->platdata.ehci_data; - ohci_data = omap->platdata.ohci_data; - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ehci"); if (!res) { dev_err(dev, "EHCI get resource IORESOURCE_MEM failed\n"); @@ -213,8 +208,8 @@ static int omap_usbhs_alloc_children(struct platform_device *pdev) } resources[1] = *res; - ehci = omap_usbhs_alloc_child(OMAP_EHCI_DEVICE, resources, 2, ehci_data, - sizeof(*ehci_data), dev); + ehci = omap_usbhs_alloc_child(OMAP_EHCI_DEVICE, resources, 2, pdata, + sizeof(*pdata), dev); if (!ehci) { dev_err(dev, "omap_usbhs_alloc_child failed\n"); @@ -238,8 +233,8 @@ static int omap_usbhs_alloc_children(struct platform_device *pdev) } resources[1] = *res; - ohci = omap_usbhs_alloc_child(OMAP_OHCI_DEVICE, resources, 2, ohci_data, - sizeof(*ohci_data), dev); + ohci = omap_usbhs_alloc_child(OMAP_OHCI_DEVICE, resources, 2, pdata, + sizeof(*pdata), dev); if (!ohci) { dev_err(dev, "omap_usbhs_alloc_child failed\n"); ret = -ENOMEM; @@ -278,31 +273,52 @@ static bool is_ohci_port(enum usbhs_omap_port_mode pmode) static int usbhs_runtime_resume(struct device *dev) { struct usbhs_hcd_omap *omap = dev_get_drvdata(dev); - struct usbhs_omap_platform_data *pdata = &omap->platdata; - unsigned long flags; + struct usbhs_omap_platform_data *pdata = omap->pdata; + int i, r; dev_dbg(dev, "usbhs_runtime_resume\n"); - if (!pdata) { - dev_dbg(dev, "missing platform_data\n"); - return -ENODEV; - } - omap_tll_enable(); - spin_lock_irqsave(&omap->lock, flags); - if (omap->ehci_logic_fck && !IS_ERR(omap->ehci_logic_fck)) + if (!IS_ERR(omap->ehci_logic_fck)) clk_enable(omap->ehci_logic_fck); - if (is_ehci_tll_mode(pdata->port_mode[0])) - clk_enable(omap->usbhost_p1_fck); - if (is_ehci_tll_mode(pdata->port_mode[1])) - clk_enable(omap->usbhost_p2_fck); - - clk_enable(omap->utmi_p1_fck); - clk_enable(omap->utmi_p2_fck); + for (i = 0; i < omap->nports; i++) { + switch (pdata->port_mode[i]) { + case OMAP_EHCI_PORT_MODE_HSIC: + if (!IS_ERR(omap->hsic60m_clk[i])) { + r = clk_enable(omap->hsic60m_clk[i]); + if (r) { + dev_err(dev, + "Can't enable port %d hsic60m clk:%d\n", + i, r); + } + } - spin_unlock_irqrestore(&omap->lock, flags); + if (!IS_ERR(omap->hsic480m_clk[i])) { + r = clk_enable(omap->hsic480m_clk[i]); + if (r) { + dev_err(dev, + "Can't enable port %d hsic480m clk:%d\n", + i, r); + } + } + /* Fall through as HSIC mode needs utmi_clk */ + + case OMAP_EHCI_PORT_MODE_TLL: + if (!IS_ERR(omap->utmi_clk[i])) { + r = clk_enable(omap->utmi_clk[i]); + if (r) { + dev_err(dev, + "Can't enable port %d clk : %d\n", + i, r); + } + } + break; + default: + break; + } + } return 0; } @@ -310,51 +326,122 @@ static int usbhs_runtime_resume(struct device *dev) static int usbhs_runtime_suspend(struct device *dev) { struct usbhs_hcd_omap *omap = dev_get_drvdata(dev); - struct usbhs_omap_platform_data *pdata = &omap->platdata; - unsigned long flags; + struct usbhs_omap_platform_data *pdata = omap->pdata; + int i; dev_dbg(dev, "usbhs_runtime_suspend\n"); - if (!pdata) { - dev_dbg(dev, "missing platform_data\n"); - return -ENODEV; - } - - spin_lock_irqsave(&omap->lock, flags); + for (i = 0; i < omap->nports; i++) { + switch (pdata->port_mode[i]) { + case OMAP_EHCI_PORT_MODE_HSIC: + if (!IS_ERR(omap->hsic60m_clk[i])) + clk_disable(omap->hsic60m_clk[i]); - if (is_ehci_tll_mode(pdata->port_mode[0])) - clk_disable(omap->usbhost_p1_fck); - if (is_ehci_tll_mode(pdata->port_mode[1])) - clk_disable(omap->usbhost_p2_fck); + if (!IS_ERR(omap->hsic480m_clk[i])) + clk_disable(omap->hsic480m_clk[i]); + /* Fall through as utmi_clks were used in HSIC mode */ - clk_disable(omap->utmi_p2_fck); - clk_disable(omap->utmi_p1_fck); + case OMAP_EHCI_PORT_MODE_TLL: + if (!IS_ERR(omap->utmi_clk[i])) + clk_disable(omap->utmi_clk[i]); + break; + default: + break; + } + } - if (omap->ehci_logic_fck && !IS_ERR(omap->ehci_logic_fck)) + if (!IS_ERR(omap->ehci_logic_fck)) clk_disable(omap->ehci_logic_fck); - spin_unlock_irqrestore(&omap->lock, flags); omap_tll_disable(); return 0; } +static unsigned omap_usbhs_rev1_hostconfig(struct usbhs_hcd_omap *omap, + unsigned reg) +{ + struct usbhs_omap_platform_data *pdata = omap->pdata; + int i; + + for (i = 0; i < omap->nports; i++) { + switch (pdata->port_mode[i]) { + case OMAP_USBHS_PORT_MODE_UNUSED: + reg &= ~(OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS << i); + break; + case OMAP_EHCI_PORT_MODE_PHY: + if (pdata->single_ulpi_bypass) + break; + + if (i == 0) + reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; + else + reg &= ~(OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS + << (i-1)); + break; + default: + if (pdata->single_ulpi_bypass) + break; + + if (i == 0) + reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; + else + reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS + << (i-1); + break; + } + } + + if (pdata->single_ulpi_bypass) { + /* bypass ULPI only if none of the ports use PHY mode */ + reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; + + for (i = 0; i < omap->nports; i++) { + if (is_ehci_phy_mode(pdata->port_mode[i])) { + reg &= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; + break; + } + } + } + + return reg; +} + +static unsigned omap_usbhs_rev2_hostconfig(struct usbhs_hcd_omap *omap, + unsigned reg) +{ + struct usbhs_omap_platform_data *pdata = omap->pdata; + int i; + + for (i = 0; i < omap->nports; i++) { + /* Clear port mode fields for PHY mode */ + reg &= ~(OMAP4_P1_MODE_CLEAR << 2 * i); + + if (is_ehci_tll_mode(pdata->port_mode[i]) || + (is_ohci_port(pdata->port_mode[i]))) + reg |= OMAP4_P1_MODE_TLL << 2 * i; + else if (is_ehci_hsic_mode(pdata->port_mode[i])) + reg |= OMAP4_P1_MODE_HSIC << 2 * i; + } + + return reg; +} + static void omap_usbhs_init(struct device *dev) { struct usbhs_hcd_omap *omap = dev_get_drvdata(dev); - struct usbhs_omap_platform_data *pdata = &omap->platdata; - unsigned long flags; + struct usbhs_omap_platform_data *pdata = omap->pdata; unsigned reg; dev_dbg(dev, "starting TI HSUSB Controller\n"); - if (pdata->ehci_data->phy_reset) { - if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) - gpio_request_one(pdata->ehci_data->reset_gpio_port[0], + if (pdata->phy_reset) { + if (gpio_is_valid(pdata->reset_gpio_port[0])) + gpio_request_one(pdata->reset_gpio_port[0], GPIOF_OUT_INIT_LOW, "USB1 PHY reset"); - if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) - gpio_request_one(pdata->ehci_data->reset_gpio_port[1], + if (gpio_is_valid(pdata->reset_gpio_port[1])) + gpio_request_one(pdata->reset_gpio_port[1], GPIOF_OUT_INIT_LOW, "USB2 PHY reset"); /* Hold the PHY in RESET for enough time till DIR is high */ @@ -362,9 +449,6 @@ static void omap_usbhs_init(struct device *dev) } pm_runtime_get_sync(dev); - spin_lock_irqsave(&omap->lock, flags); - omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION); - dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev); reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG); /* setup ULPI bypass and burst configurations */ @@ -374,89 +458,51 @@ static void omap_usbhs_init(struct device *dev) reg |= OMAP4_UHH_HOSTCONFIG_APP_START_CLK; reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN; - if (is_omap_usbhs_rev1(omap)) { - if (pdata->port_mode[0] == OMAP_USBHS_PORT_MODE_UNUSED) - reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS; - if (pdata->port_mode[1] == OMAP_USBHS_PORT_MODE_UNUSED) - reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS; - if (pdata->port_mode[2] == OMAP_USBHS_PORT_MODE_UNUSED) - reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS; - - /* Bypass the TLL module for PHY mode operation */ - if (pdata->single_ulpi_bypass) { - dev_dbg(dev, "OMAP3 ES version <= ES2.1\n"); - if (is_ehci_phy_mode(pdata->port_mode[0]) || - is_ehci_phy_mode(pdata->port_mode[1]) || - is_ehci_phy_mode(pdata->port_mode[2])) - reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; - else - reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; - } else { - dev_dbg(dev, "OMAP3 ES version > ES2.1\n"); - if (is_ehci_phy_mode(pdata->port_mode[0])) - reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; - else - reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; - if (is_ehci_phy_mode(pdata->port_mode[1])) - reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS; - else - reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS; - if (is_ehci_phy_mode(pdata->port_mode[2])) - reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS; - else - reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS; - } - } else if (is_omap_usbhs_rev2(omap)) { - /* Clear port mode fields for PHY mode*/ - reg &= ~OMAP4_P1_MODE_CLEAR; - reg &= ~OMAP4_P2_MODE_CLEAR; + switch (omap->usbhs_rev) { + case OMAP_USBHS_REV1: + omap_usbhs_rev1_hostconfig(omap, reg); + break; - if (is_ehci_tll_mode(pdata->port_mode[0]) || - (is_ohci_port(pdata->port_mode[0]))) - reg |= OMAP4_P1_MODE_TLL; - else if (is_ehci_hsic_mode(pdata->port_mode[0])) - reg |= OMAP4_P1_MODE_HSIC; + case OMAP_USBHS_REV2: + omap_usbhs_rev2_hostconfig(omap, reg); + break; - if (is_ehci_tll_mode(pdata->port_mode[1]) || - (is_ohci_port(pdata->port_mode[1]))) - reg |= OMAP4_P2_MODE_TLL; - else if (is_ehci_hsic_mode(pdata->port_mode[1])) - reg |= OMAP4_P2_MODE_HSIC; + default: /* newer revisions */ + omap_usbhs_rev2_hostconfig(omap, reg); + break; } usbhs_write(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg); dev_dbg(dev, "UHH setup done, uhh_hostconfig=%x\n", reg); - spin_unlock_irqrestore(&omap->lock, flags); - pm_runtime_put_sync(dev); - if (pdata->ehci_data->phy_reset) { + if (pdata->phy_reset) { /* Hold the PHY in RESET for enough time till * PHY is settled and ready */ udelay(10); - if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) + if (gpio_is_valid(pdata->reset_gpio_port[0])) gpio_set_value_cansleep - (pdata->ehci_data->reset_gpio_port[0], 1); + (pdata->reset_gpio_port[0], 1); - if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) + if (gpio_is_valid(pdata->reset_gpio_port[1])) gpio_set_value_cansleep - (pdata->ehci_data->reset_gpio_port[1], 1); + (pdata->reset_gpio_port[1], 1); } } static void omap_usbhs_deinit(struct device *dev) { struct usbhs_hcd_omap *omap = dev_get_drvdata(dev); - struct usbhs_omap_platform_data *pdata = &omap->platdata; + struct usbhs_omap_platform_data *pdata = omap->pdata; - if (pdata->ehci_data->phy_reset) { - if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) - gpio_free(pdata->ehci_data->reset_gpio_port[0]); + if (pdata->phy_reset) { + if (gpio_is_valid(pdata->reset_gpio_port[0])) + gpio_free(pdata->reset_gpio_port[0]); - if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) - gpio_free(pdata->ehci_data->reset_gpio_port[1]); + if (gpio_is_valid(pdata->reset_gpio_port[1])) + gpio_free(pdata->reset_gpio_port[1]); } } @@ -474,137 +520,185 @@ static int usbhs_omap_probe(struct platform_device *pdev) struct resource *res; int ret = 0; int i; + bool need_logic_fck; if (!pdata) { dev_err(dev, "Missing platform data\n"); - ret = -ENOMEM; - goto end_probe; + return -ENODEV; } - omap = kzalloc(sizeof(*omap), GFP_KERNEL); + omap = devm_kzalloc(dev, sizeof(*omap), GFP_KERNEL); if (!omap) { dev_err(dev, "Memory allocation failed\n"); - ret = -ENOMEM; - goto end_probe; + return -ENOMEM; } - spin_lock_init(&omap->lock); - - for (i = 0; i < OMAP3_HS_USB_PORTS; i++) - omap->platdata.port_mode[i] = pdata->port_mode[i]; + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uhh"); + omap->uhh_base = devm_request_and_ioremap(dev, res); + if (!omap->uhh_base) { + dev_err(dev, "Resource request/ioremap failed\n"); + return -EADDRNOTAVAIL; + } - omap->platdata.ehci_data = pdata->ehci_data; - omap->platdata.ohci_data = pdata->ohci_data; + omap->pdata = pdata; pm_runtime_enable(dev); + platform_set_drvdata(pdev, omap); + pm_runtime_get_sync(dev); + + omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION); - for (i = 0; i < OMAP3_HS_USB_PORTS; i++) - if (is_ehci_phy_mode(i) || is_ehci_tll_mode(i) || - is_ehci_hsic_mode(i)) { - omap->ehci_logic_fck = clk_get(dev, "ehci_logic_fck"); - if (IS_ERR(omap->ehci_logic_fck)) { - ret = PTR_ERR(omap->ehci_logic_fck); - dev_warn(dev, "ehci_logic_fck failed:%d\n", - ret); - } + /* we need to call runtime suspend before we update omap->nports + * to prevent unbalanced clk_disable() + */ + pm_runtime_put_sync(dev); + + /* + * If platform data contains nports then use that + * else make out number of ports from USBHS revision + */ + if (pdata->nports) { + omap->nports = pdata->nports; + } else { + switch (omap->usbhs_rev) { + case OMAP_USBHS_REV1: + omap->nports = 3; + break; + case OMAP_USBHS_REV2: + omap->nports = 2; + break; + default: + omap->nports = OMAP3_HS_USB_PORTS; + dev_dbg(dev, + "USB HOST Rev:0x%d not recognized, assuming %d ports\n", + omap->usbhs_rev, omap->nports); break; } + } - omap->utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk"); - if (IS_ERR(omap->utmi_p1_fck)) { - ret = PTR_ERR(omap->utmi_p1_fck); - dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret); - goto err_end; + i = sizeof(struct clk *) * omap->nports; + omap->utmi_clk = devm_kzalloc(dev, i, GFP_KERNEL); + omap->hsic480m_clk = devm_kzalloc(dev, i, GFP_KERNEL); + omap->hsic60m_clk = devm_kzalloc(dev, i, GFP_KERNEL); + + if (!omap->utmi_clk || !omap->hsic480m_clk || !omap->hsic60m_clk) { + dev_err(dev, "Memory allocation failed\n"); + ret = -ENOMEM; + goto err_mem; + } + + need_logic_fck = false; + for (i = 0; i < omap->nports; i++) { + if (is_ehci_phy_mode(i) || is_ehci_tll_mode(i) || + is_ehci_hsic_mode(i)) + need_logic_fck |= true; + } + + omap->ehci_logic_fck = ERR_PTR(-EINVAL); + if (need_logic_fck) { + omap->ehci_logic_fck = clk_get(dev, "ehci_logic_fck"); + if (IS_ERR(omap->ehci_logic_fck)) { + ret = PTR_ERR(omap->ehci_logic_fck); + dev_dbg(dev, "ehci_logic_fck failed:%d\n", ret); + } + } + + omap->utmi_p1_gfclk = clk_get(dev, "utmi_p1_gfclk"); + if (IS_ERR(omap->utmi_p1_gfclk)) { + ret = PTR_ERR(omap->utmi_p1_gfclk); + dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret); + goto err_p1_gfclk; + } + + omap->utmi_p2_gfclk = clk_get(dev, "utmi_p2_gfclk"); + if (IS_ERR(omap->utmi_p2_gfclk)) { + ret = PTR_ERR(omap->utmi_p2_gfclk); + dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret); + goto err_p2_gfclk; } omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck"); if (IS_ERR(omap->xclk60mhsp1_ck)) { ret = PTR_ERR(omap->xclk60mhsp1_ck); dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret); - goto err_utmi_p1_fck; - } - - omap->utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk"); - if (IS_ERR(omap->utmi_p2_fck)) { - ret = PTR_ERR(omap->utmi_p2_fck); - dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret); - goto err_xclk60mhsp1_ck; + goto err_xclk60mhsp1; } omap->xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck"); if (IS_ERR(omap->xclk60mhsp2_ck)) { ret = PTR_ERR(omap->xclk60mhsp2_ck); dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret); - goto err_utmi_p2_fck; - } - - omap->usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk"); - if (IS_ERR(omap->usbhost_p1_fck)) { - ret = PTR_ERR(omap->usbhost_p1_fck); - dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret); - goto err_xclk60mhsp2_ck; - } - - omap->usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk"); - if (IS_ERR(omap->usbhost_p2_fck)) { - ret = PTR_ERR(omap->usbhost_p2_fck); - dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret); - goto err_usbhost_p1_fck; + goto err_xclk60mhsp2; } omap->init_60m_fclk = clk_get(dev, "init_60m_fclk"); if (IS_ERR(omap->init_60m_fclk)) { ret = PTR_ERR(omap->init_60m_fclk); dev_err(dev, "init_60m_fclk failed error:%d\n", ret); - goto err_usbhost_p2_fck; + goto err_init60m; + } + + for (i = 0; i < omap->nports; i++) { + char clkname[30]; + + /* clock names are indexed from 1*/ + snprintf(clkname, sizeof(clkname), + "usb_host_hs_utmi_p%d_clk", i + 1); + + /* If a clock is not found we won't bail out as not all + * platforms have all clocks and we can function without + * them + */ + omap->utmi_clk[i] = clk_get(dev, clkname); + if (IS_ERR(omap->utmi_clk[i])) + dev_dbg(dev, "Failed to get clock : %s : %ld\n", + clkname, PTR_ERR(omap->utmi_clk[i])); + + snprintf(clkname, sizeof(clkname), + "usb_host_hs_hsic480m_p%d_clk", i + 1); + omap->hsic480m_clk[i] = clk_get(dev, clkname); + if (IS_ERR(omap->hsic480m_clk[i])) + dev_dbg(dev, "Failed to get clock : %s : %ld\n", + clkname, PTR_ERR(omap->hsic480m_clk[i])); + + snprintf(clkname, sizeof(clkname), + "usb_host_hs_hsic60m_p%d_clk", i + 1); + omap->hsic60m_clk[i] = clk_get(dev, clkname); + if (IS_ERR(omap->hsic60m_clk[i])) + dev_dbg(dev, "Failed to get clock : %s : %ld\n", + clkname, PTR_ERR(omap->hsic60m_clk[i])); } if (is_ehci_phy_mode(pdata->port_mode[0])) { - /* for OMAP3 , the clk set paretn fails */ - ret = clk_set_parent(omap->utmi_p1_fck, + /* for OMAP3, clk_set_parent fails */ + ret = clk_set_parent(omap->utmi_p1_gfclk, omap->xclk60mhsp1_ck); if (ret != 0) - dev_err(dev, "xclk60mhsp1_ck set parent" - "failed error:%d\n", ret); + dev_dbg(dev, "xclk60mhsp1_ck set parent failed: %d\n", + ret); } else if (is_ehci_tll_mode(pdata->port_mode[0])) { - ret = clk_set_parent(omap->utmi_p1_fck, + ret = clk_set_parent(omap->utmi_p1_gfclk, omap->init_60m_fclk); if (ret != 0) - dev_err(dev, "init_60m_fclk set parent" - "failed error:%d\n", ret); + dev_dbg(dev, "P0 init_60m_fclk set parent failed: %d\n", + ret); } if (is_ehci_phy_mode(pdata->port_mode[1])) { - ret = clk_set_parent(omap->utmi_p2_fck, + ret = clk_set_parent(omap->utmi_p2_gfclk, omap->xclk60mhsp2_ck); if (ret != 0) - dev_err(dev, "xclk60mhsp2_ck set parent" - "failed error:%d\n", ret); + dev_dbg(dev, "xclk60mhsp2_ck set parent failed: %d\n", + ret); } else if (is_ehci_tll_mode(pdata->port_mode[1])) { - ret = clk_set_parent(omap->utmi_p2_fck, + ret = clk_set_parent(omap->utmi_p2_gfclk, omap->init_60m_fclk); if (ret != 0) - dev_err(dev, "init_60m_fclk set parent" - "failed error:%d\n", ret); - } - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uhh"); - if (!res) { - dev_err(dev, "UHH EHCI get resource failed\n"); - ret = -ENODEV; - goto err_init_60m_fclk; - } - - omap->uhh_base = ioremap(res->start, resource_size(res)); - if (!omap->uhh_base) { - dev_err(dev, "UHH ioremap failed\n"); - ret = -ENOMEM; - goto err_init_60m_fclk; + dev_dbg(dev, "P1 init_60m_fclk set parent failed: %d\n", + ret); } - platform_set_drvdata(pdev, omap); - omap_usbhs_init(dev); ret = omap_usbhs_alloc_children(pdev); if (ret) { @@ -612,39 +706,41 @@ static int usbhs_omap_probe(struct platform_device *pdev) goto err_alloc; } - goto end_probe; + return 0; err_alloc: omap_usbhs_deinit(&pdev->dev); - iounmap(omap->uhh_base); - -err_init_60m_fclk: - clk_put(omap->init_60m_fclk); -err_usbhost_p2_fck: - clk_put(omap->usbhost_p2_fck); + for (i = 0; i < omap->nports; i++) { + if (!IS_ERR(omap->utmi_clk[i])) + clk_put(omap->utmi_clk[i]); + if (!IS_ERR(omap->hsic60m_clk[i])) + clk_put(omap->hsic60m_clk[i]); + if (!IS_ERR(omap->hsic480m_clk[i])) + clk_put(omap->hsic480m_clk[i]); + } -err_usbhost_p1_fck: - clk_put(omap->usbhost_p1_fck); + clk_put(omap->init_60m_fclk); -err_xclk60mhsp2_ck: +err_init60m: clk_put(omap->xclk60mhsp2_ck); -err_utmi_p2_fck: - clk_put(omap->utmi_p2_fck); - -err_xclk60mhsp1_ck: +err_xclk60mhsp2: clk_put(omap->xclk60mhsp1_ck); -err_utmi_p1_fck: - clk_put(omap->utmi_p1_fck); +err_xclk60mhsp1: + clk_put(omap->utmi_p2_gfclk); -err_end: - clk_put(omap->ehci_logic_fck); +err_p2_gfclk: + clk_put(omap->utmi_p1_gfclk); + +err_p1_gfclk: + if (!IS_ERR(omap->ehci_logic_fck)) + clk_put(omap->ehci_logic_fck); + +err_mem: pm_runtime_disable(dev); - kfree(omap); -end_probe: return ret; } @@ -657,19 +753,29 @@ static int usbhs_omap_probe(struct platform_device *pdev) static int usbhs_omap_remove(struct platform_device *pdev) { struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev); + int i; omap_usbhs_deinit(&pdev->dev); - iounmap(omap->uhh_base); + + for (i = 0; i < omap->nports; i++) { + if (!IS_ERR(omap->utmi_clk[i])) + clk_put(omap->utmi_clk[i]); + if (!IS_ERR(omap->hsic60m_clk[i])) + clk_put(omap->hsic60m_clk[i]); + if (!IS_ERR(omap->hsic480m_clk[i])) + clk_put(omap->hsic480m_clk[i]); + } + clk_put(omap->init_60m_fclk); - clk_put(omap->usbhost_p2_fck); - clk_put(omap->usbhost_p1_fck); + clk_put(omap->utmi_p1_gfclk); + clk_put(omap->utmi_p2_gfclk); clk_put(omap->xclk60mhsp2_ck); - clk_put(omap->utmi_p2_fck); clk_put(omap->xclk60mhsp1_ck); - clk_put(omap->utmi_p1_fck); - clk_put(omap->ehci_logic_fck); + + if (!IS_ERR(omap->ehci_logic_fck)) + clk_put(omap->ehci_logic_fck); + pm_runtime_disable(&pdev->dev); - kfree(omap); return 0; } @@ -685,7 +791,7 @@ static struct platform_driver usbhs_omap_driver = { .owner = THIS_MODULE, .pm = &usbhsomap_dev_pm_ops, }, - .remove = __exit_p(usbhs_omap_remove), + .remove = usbhs_omap_remove, }; MODULE_AUTHOR("Keshava Munegowda "); diff --git a/drivers/mfd/omap-usb-tll.c b/drivers/mfd/omap-usb-tll.c index eb869153206d27f3d58a45d177f19a1076b3a1dd..0aef1a768880550a3e18ae7da547f55e76cc6fd4 100644 --- a/drivers/mfd/omap-usb-tll.c +++ b/drivers/mfd/omap-usb-tll.c @@ -54,10 +54,13 @@ #define OMAP_TLL_CHANNEL_CONF(num) (0x040 + 0x004 * num) #define OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT 24 +#define OMAP_TLL_CHANNEL_CONF_DRVVBUS (1 << 16) +#define OMAP_TLL_CHANNEL_CONF_CHRGVBUS (1 << 15) #define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF (1 << 11) #define OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE (1 << 10) #define OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE (1 << 9) #define OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE (1 << 8) +#define OMAP_TLL_CHANNEL_CONF_MODE_TRANSPARENT_UTMI (2 << 1) #define OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS (1 << 1) #define OMAP_TLL_CHANNEL_CONF_CHANEN (1 << 0) @@ -92,21 +95,25 @@ #define OMAP_USBTLL_REV1 0x00000015 /* OMAP3 */ #define OMAP_USBTLL_REV2 0x00000018 /* OMAP 3630 */ #define OMAP_USBTLL_REV3 0x00000004 /* OMAP4 */ +#define OMAP_USBTLL_REV4 0x00000006 /* OMAP5 */ #define is_ehci_tll_mode(x) (x == OMAP_EHCI_PORT_MODE_TLL) +/* only PHY and UNUSED modes don't need TLL */ +#define omap_usb_mode_needs_tll(x) ((x) != OMAP_USBHS_PORT_MODE_UNUSED &&\ + (x) != OMAP_EHCI_PORT_MODE_PHY) + struct usbtll_omap { - struct clk *usbtll_p1_fck; - struct clk *usbtll_p2_fck; - struct usbtll_omap_platform_data platdata; - /* secure the register updates */ - spinlock_t lock; + int nch; /* num. of channels */ + struct usbhs_omap_platform_data *pdata; + struct clk **ch_clk; }; /*-------------------------------------------------------------------------*/ -const char usbtll_driver_name[] = USBTLL_DRIVER_NAME; -struct platform_device *tll_pdev; +static const char usbtll_driver_name[] = USBTLL_DRIVER_NAME; +static struct device *tll_dev; +static DEFINE_SPINLOCK(tll_lock); /* serialize access to tll_dev */ /*-------------------------------------------------------------------------*/ @@ -203,84 +210,84 @@ static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode) static int usbtll_omap_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct usbtll_omap_platform_data *pdata = dev->platform_data; + struct usbhs_omap_platform_data *pdata = dev->platform_data; void __iomem *base; struct resource *res; struct usbtll_omap *tll; unsigned reg; - unsigned long flags; int ret = 0; - int i, ver, count; + int i, ver; + bool needs_tll; dev_dbg(dev, "starting TI HSUSB TLL Controller\n"); - tll = kzalloc(sizeof(struct usbtll_omap), GFP_KERNEL); + tll = devm_kzalloc(dev, sizeof(struct usbtll_omap), GFP_KERNEL); if (!tll) { dev_err(dev, "Memory allocation failed\n"); - ret = -ENOMEM; - goto end; + return -ENOMEM; } - spin_lock_init(&tll->lock); - - for (i = 0; i < OMAP3_HS_USB_PORTS; i++) - tll->platdata.port_mode[i] = pdata->port_mode[i]; - - tll->usbtll_p1_fck = clk_get(dev, "usb_tll_hs_usb_ch0_clk"); - if (IS_ERR(tll->usbtll_p1_fck)) { - ret = PTR_ERR(tll->usbtll_p1_fck); - dev_err(dev, "usbtll_p1_fck failed error:%d\n", ret); - goto err_tll; + if (!pdata) { + dev_err(dev, "Platform data missing\n"); + return -ENODEV; } - tll->usbtll_p2_fck = clk_get(dev, "usb_tll_hs_usb_ch1_clk"); - if (IS_ERR(tll->usbtll_p2_fck)) { - ret = PTR_ERR(tll->usbtll_p2_fck); - dev_err(dev, "usbtll_p2_fck failed error:%d\n", ret); - goto err_usbtll_p1_fck; - } + tll->pdata = pdata; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "usb tll get resource failed\n"); - ret = -ENODEV; - goto err_usbtll_p2_fck; - } - - base = ioremap(res->start, resource_size(res)); + base = devm_request_and_ioremap(dev, res); if (!base) { - dev_err(dev, "TLL ioremap failed\n"); - ret = -ENOMEM; - goto err_usbtll_p2_fck; + ret = -EADDRNOTAVAIL; + dev_err(dev, "Resource request/ioremap failed:%d\n", ret); + return ret; } platform_set_drvdata(pdev, tll); pm_runtime_enable(dev); pm_runtime_get_sync(dev); - spin_lock_irqsave(&tll->lock, flags); - ver = usbtll_read(base, OMAP_USBTLL_REVISION); switch (ver) { case OMAP_USBTLL_REV1: - case OMAP_USBTLL_REV2: - count = OMAP_TLL_CHANNEL_COUNT; + case OMAP_USBTLL_REV4: + tll->nch = OMAP_TLL_CHANNEL_COUNT; break; + case OMAP_USBTLL_REV2: case OMAP_USBTLL_REV3: - count = OMAP_REV2_TLL_CHANNEL_COUNT; + tll->nch = OMAP_REV2_TLL_CHANNEL_COUNT; break; default: - dev_err(dev, "TLL version failed\n"); - ret = -ENODEV; - goto err_ioremap; + tll->nch = OMAP_TLL_CHANNEL_COUNT; + dev_dbg(dev, + "USB TLL Rev : 0x%x not recognized, assuming %d channels\n", + ver, tll->nch); + break; } - if (is_ehci_tll_mode(pdata->port_mode[0]) || - is_ehci_tll_mode(pdata->port_mode[1]) || - is_ehci_tll_mode(pdata->port_mode[2]) || - is_ohci_port(pdata->port_mode[0]) || - is_ohci_port(pdata->port_mode[1]) || - is_ohci_port(pdata->port_mode[2])) { + tll->ch_clk = devm_kzalloc(dev, sizeof(struct clk * [tll->nch]), + GFP_KERNEL); + if (!tll->ch_clk) { + ret = -ENOMEM; + dev_err(dev, "Couldn't allocate memory for channel clocks\n"); + goto err_clk_alloc; + } + + for (i = 0; i < tll->nch; i++) { + char clkname[] = "usb_tll_hs_usb_chx_clk"; + + snprintf(clkname, sizeof(clkname), + "usb_tll_hs_usb_ch%d_clk", i); + tll->ch_clk[i] = clk_get(dev, clkname); + + if (IS_ERR(tll->ch_clk[i])) + dev_dbg(dev, "can't get clock : %s\n", clkname); + } + + needs_tll = false; + for (i = 0; i < tll->nch; i++) + needs_tll |= omap_usb_mode_needs_tll(pdata->port_mode[i]); + + if (needs_tll) { /* Program Common TLL register */ reg = usbtll_read(base, OMAP_TLL_SHARED_CONF); @@ -292,7 +299,7 @@ static int usbtll_omap_probe(struct platform_device *pdev) usbtll_write(base, OMAP_TLL_SHARED_CONF, reg); /* Enable channels now */ - for (i = 0; i < count; i++) { + for (i = 0; i < tll->nch; i++) { reg = usbtll_read(base, OMAP_TLL_CHANNEL_CONF(i)); if (is_ohci_port(pdata->port_mode[i])) { @@ -308,6 +315,15 @@ static int usbtll_omap_probe(struct platform_device *pdev) reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF | OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE); + } else if (pdata->port_mode[i] == + OMAP_EHCI_PORT_MODE_HSIC) { + /* + * HSIC Mode requires UTMI port configurations + */ + reg |= OMAP_TLL_CHANNEL_CONF_DRVVBUS + | OMAP_TLL_CHANNEL_CONF_CHRGVBUS + | OMAP_TLL_CHANNEL_CONF_MODE_TRANSPARENT_UTMI + | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF; } else { continue; } @@ -320,25 +336,18 @@ static int usbtll_omap_probe(struct platform_device *pdev) } } -err_ioremap: - spin_unlock_irqrestore(&tll->lock, flags); - iounmap(base); pm_runtime_put_sync(dev); - tll_pdev = pdev; - if (!ret) - goto end; - pm_runtime_disable(dev); + /* only after this can omap_tll_enable/disable work */ + spin_lock(&tll_lock); + tll_dev = dev; + spin_unlock(&tll_lock); -err_usbtll_p2_fck: - clk_put(tll->usbtll_p2_fck); - -err_usbtll_p1_fck: - clk_put(tll->usbtll_p1_fck); + return 0; -err_tll: - kfree(tll); +err_clk_alloc: + pm_runtime_put_sync(dev); + pm_runtime_disable(dev); -end: return ret; } @@ -351,36 +360,42 @@ static int usbtll_omap_probe(struct platform_device *pdev) static int usbtll_omap_remove(struct platform_device *pdev) { struct usbtll_omap *tll = platform_get_drvdata(pdev); + int i; + + spin_lock(&tll_lock); + tll_dev = NULL; + spin_unlock(&tll_lock); + + for (i = 0; i < tll->nch; i++) + if (!IS_ERR(tll->ch_clk[i])) + clk_put(tll->ch_clk[i]); - clk_put(tll->usbtll_p2_fck); - clk_put(tll->usbtll_p1_fck); pm_runtime_disable(&pdev->dev); - kfree(tll); return 0; } static int usbtll_runtime_resume(struct device *dev) { struct usbtll_omap *tll = dev_get_drvdata(dev); - struct usbtll_omap_platform_data *pdata = &tll->platdata; - unsigned long flags; + struct usbhs_omap_platform_data *pdata = tll->pdata; + int i; dev_dbg(dev, "usbtll_runtime_resume\n"); - if (!pdata) { - dev_dbg(dev, "missing platform_data\n"); - return -ENODEV; - } - - spin_lock_irqsave(&tll->lock, flags); + for (i = 0; i < tll->nch; i++) { + if (omap_usb_mode_needs_tll(pdata->port_mode[i])) { + int r; - if (is_ehci_tll_mode(pdata->port_mode[0])) - clk_enable(tll->usbtll_p1_fck); - - if (is_ehci_tll_mode(pdata->port_mode[1])) - clk_enable(tll->usbtll_p2_fck); + if (IS_ERR(tll->ch_clk[i])) + continue; - spin_unlock_irqrestore(&tll->lock, flags); + r = clk_enable(tll->ch_clk[i]); + if (r) { + dev_err(dev, + "Error enabling ch %d clock: %d\n", i, r); + } + } + } return 0; } @@ -388,26 +403,18 @@ static int usbtll_runtime_resume(struct device *dev) static int usbtll_runtime_suspend(struct device *dev) { struct usbtll_omap *tll = dev_get_drvdata(dev); - struct usbtll_omap_platform_data *pdata = &tll->platdata; - unsigned long flags; + struct usbhs_omap_platform_data *pdata = tll->pdata; + int i; dev_dbg(dev, "usbtll_runtime_suspend\n"); - if (!pdata) { - dev_dbg(dev, "missing platform_data\n"); - return -ENODEV; + for (i = 0; i < tll->nch; i++) { + if (omap_usb_mode_needs_tll(pdata->port_mode[i])) { + if (!IS_ERR(tll->ch_clk[i])) + clk_disable(tll->ch_clk[i]); + } } - spin_lock_irqsave(&tll->lock, flags); - - if (is_ehci_tll_mode(pdata->port_mode[0])) - clk_disable(tll->usbtll_p1_fck); - - if (is_ehci_tll_mode(pdata->port_mode[1])) - clk_disable(tll->usbtll_p2_fck); - - spin_unlock_irqrestore(&tll->lock, flags); - return 0; } @@ -429,21 +436,39 @@ static struct platform_driver usbtll_omap_driver = { int omap_tll_enable(void) { - if (!tll_pdev) { - pr_err("missing omap usbhs tll platform_data\n"); - return -ENODEV; + int ret; + + spin_lock(&tll_lock); + + if (!tll_dev) { + pr_err("%s: OMAP USB TLL not initialized\n", __func__); + ret = -ENODEV; + } else { + ret = pm_runtime_get_sync(tll_dev); } - return pm_runtime_get_sync(&tll_pdev->dev); + + spin_unlock(&tll_lock); + + return ret; } EXPORT_SYMBOL_GPL(omap_tll_enable); int omap_tll_disable(void) { - if (!tll_pdev) { - pr_err("missing omap usbhs tll platform_data\n"); - return -ENODEV; + int ret; + + spin_lock(&tll_lock); + + if (!tll_dev) { + pr_err("%s: OMAP USB TLL not initialized\n", __func__); + ret = -ENODEV; + } else { + ret = pm_runtime_put_sync(tll_dev); } - return pm_runtime_put_sync(&tll_pdev->dev); + + spin_unlock(&tll_lock); + + return ret; } EXPORT_SYMBOL_GPL(omap_tll_disable); diff --git a/drivers/mfd/palmas.c b/drivers/mfd/palmas.c index 6ffd7a2affdc2df808bad3a75b9389741f415cbc..bbdbc50a3ccadb7ec98d5d6cd6176c36b9d85a50 100644 --- a/drivers/mfd/palmas.c +++ b/drivers/mfd/palmas.c @@ -39,6 +39,14 @@ enum palmas_ids { PALMAS_USB_ID, }; +static struct resource palmas_rtc_resources[] = { + { + .start = PALMAS_RTC_ALARM_IRQ, + .end = PALMAS_RTC_ALARM_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + static const struct mfd_cell palmas_children[] = { { .name = "palmas-pmic", @@ -59,6 +67,8 @@ static const struct mfd_cell palmas_children[] = { { .name = "palmas-rtc", .id = PALMAS_RTC_ID, + .resources = &palmas_rtc_resources[0], + .num_resources = ARRAY_SIZE(palmas_rtc_resources), }, { .name = "palmas-pwrbutton", @@ -456,8 +466,8 @@ static int palmas_i2c_probe(struct i2c_client *i2c, ret = mfd_add_devices(palmas->dev, -1, children, ARRAY_SIZE(palmas_children), - NULL, regmap_irq_chip_get_base(palmas->irq_data), - NULL); + NULL, 0, + regmap_irq_get_domain(palmas->irq_data)); kfree(children); if (ret < 0) diff --git a/drivers/mfd/rtl8411.c b/drivers/mfd/rtl8411.c index 3d3b4addf81a9b73b480ae3874e2675e1678b52b..2a2d31687b72243de84451212ff52198f37ecc29 100644 --- a/drivers/mfd/rtl8411.c +++ b/drivers/mfd/rtl8411.c @@ -115,14 +115,24 @@ static int rtl8411_card_power_off(struct rtsx_pcr *pcr, int card) static int rtl8411_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage) { u8 mask, val; + int err; mask = (BPP_REG_TUNED18 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_MASK; - if (voltage == OUTPUT_3V3) + if (voltage == OUTPUT_3V3) { + err = rtsx_pci_write_register(pcr, + SD30_DRIVE_SEL, 0x07, DRIVER_TYPE_D); + if (err < 0) + return err; val = (BPP_ASIC_3V3 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_3V3; - else if (voltage == OUTPUT_1V8) + } else if (voltage == OUTPUT_1V8) { + err = rtsx_pci_write_register(pcr, + SD30_DRIVE_SEL, 0x07, DRIVER_TYPE_B); + if (err < 0) + return err; val = (BPP_ASIC_1V8 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_1V8; - else + } else { return -EINVAL; + } return rtsx_pci_write_register(pcr, LDO_CTL, mask, val); } diff --git a/drivers/mfd/rts5209.c b/drivers/mfd/rts5209.c index 98fe0f39463ed1596f1e0881f5d7352349da400d..ec78d9fb08791a9975a825411b6d7a8049f5d801 100644 --- a/drivers/mfd/rts5209.c +++ b/drivers/mfd/rts5209.c @@ -149,10 +149,18 @@ static int rts5209_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage) int err; if (voltage == OUTPUT_3V3) { + err = rtsx_pci_write_register(pcr, + SD30_DRIVE_SEL, 0x07, DRIVER_TYPE_D); + if (err < 0) + return err; err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4FC0 | 0x24); if (err < 0) return err; } else if (voltage == OUTPUT_1V8) { + err = rtsx_pci_write_register(pcr, + SD30_DRIVE_SEL, 0x07, DRIVER_TYPE_B); + if (err < 0) + return err; err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4C40 | 0x24); if (err < 0) return err; diff --git a/drivers/mfd/rts5227.c b/drivers/mfd/rts5227.c new file mode 100644 index 0000000000000000000000000000000000000000..fc831dcb148035fcc9e02ec3bb3eee7b9c9782d2 --- /dev/null +++ b/drivers/mfd/rts5227.c @@ -0,0 +1,234 @@ +/* Driver for Realtek PCI-Express card reader + * + * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see . + * + * Author: + * Wei WANG + * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China + * + * Roger Tseng + * No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan + */ + +#include +#include +#include + +#include "rtsx_pcr.h" + +static int rts5227_extra_init_hw(struct rtsx_pcr *pcr) +{ + u16 cap; + + rtsx_pci_init_cmd(pcr); + + /* Configure GPIO as output */ + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, GPIO_CTL, 0x02, 0x02); + /* Switch LDO3318 source from DV33 to card_3v3 */ + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x00); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x01); + /* LED shine disabled, set initial shine cycle period */ + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, OLT_LED_CTL, 0x0F, 0x02); + /* Configure LTR */ + pcie_capability_read_word(pcr->pci, PCI_EXP_DEVCTL2, &cap); + if (cap & PCI_EXP_LTR_EN) + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LTR_CTL, 0xFF, 0xA3); + /* Configure OBFF */ + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, OBFF_CFG, 0x03, 0x03); + /* Configure force_clock_req + * Maybe We should define 0xFF03 as some name + */ + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, 0xFF03, 0x08, 0x08); + /* Correct driving */ + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, + SD30_CLK_DRIVE_SEL, 0xFF, 0x96); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, + SD30_CMD_DRIVE_SEL, 0xFF, 0x96); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, + SD30_DAT_DRIVE_SEL, 0xFF, 0x96); + + return rtsx_pci_send_cmd(pcr, 100); +} + +static int rts5227_optimize_phy(struct rtsx_pcr *pcr) +{ + /* Optimize RX sensitivity */ + return rtsx_pci_write_phy_register(pcr, 0x00, 0xBA42); +} + +static int rts5227_turn_on_led(struct rtsx_pcr *pcr) +{ + return rtsx_pci_write_register(pcr, GPIO_CTL, 0x02, 0x02); +} + +static int rts5227_turn_off_led(struct rtsx_pcr *pcr) +{ + return rtsx_pci_write_register(pcr, GPIO_CTL, 0x02, 0x00); +} + +static int rts5227_enable_auto_blink(struct rtsx_pcr *pcr) +{ + return rtsx_pci_write_register(pcr, OLT_LED_CTL, 0x08, 0x08); +} + +static int rts5227_disable_auto_blink(struct rtsx_pcr *pcr) +{ + return rtsx_pci_write_register(pcr, OLT_LED_CTL, 0x08, 0x00); +} + +static int rts5227_card_power_on(struct rtsx_pcr *pcr, int card) +{ + int err; + + rtsx_pci_init_cmd(pcr); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL, + SD_POWER_MASK, SD_PARTIAL_POWER_ON); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL, + LDO3318_PWR_MASK, 0x02); + err = rtsx_pci_send_cmd(pcr, 100); + if (err < 0) + return err; + + /* To avoid too large in-rush current */ + udelay(150); + + rtsx_pci_init_cmd(pcr); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL, + SD_POWER_MASK, SD_POWER_ON); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL, + LDO3318_PWR_MASK, 0x06); + err = rtsx_pci_send_cmd(pcr, 100); + if (err < 0) + return err; + + return 0; +} + +static int rts5227_card_power_off(struct rtsx_pcr *pcr, int card) +{ + rtsx_pci_init_cmd(pcr); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL, + SD_POWER_MASK | PMOS_STRG_MASK, + SD_POWER_OFF | PMOS_STRG_400mA); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL, + LDO3318_PWR_MASK, 0X00); + return rtsx_pci_send_cmd(pcr, 100); +} + +static int rts5227_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage) +{ + int err; + u8 drive_sel; + + if (voltage == OUTPUT_3V3) { + err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4FC0 | 0x24); + if (err < 0) + return err; + drive_sel = 0x96; + } else if (voltage == OUTPUT_1V8) { + err = rtsx_pci_write_phy_register(pcr, 0x11, 0x3C02); + if (err < 0) + return err; + err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4C80 | 0x24); + if (err < 0) + return err; + drive_sel = 0xB3; + } else { + return -EINVAL; + } + + /* set pad drive */ + rtsx_pci_init_cmd(pcr); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_CLK_DRIVE_SEL, + 0xFF, drive_sel); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_CMD_DRIVE_SEL, + 0xFF, drive_sel); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_DAT_DRIVE_SEL, + 0xFF, drive_sel); + return rtsx_pci_send_cmd(pcr, 100); +} + +static const struct pcr_ops rts5227_pcr_ops = { + .extra_init_hw = rts5227_extra_init_hw, + .optimize_phy = rts5227_optimize_phy, + .turn_on_led = rts5227_turn_on_led, + .turn_off_led = rts5227_turn_off_led, + .enable_auto_blink = rts5227_enable_auto_blink, + .disable_auto_blink = rts5227_disable_auto_blink, + .card_power_on = rts5227_card_power_on, + .card_power_off = rts5227_card_power_off, + .switch_output_voltage = rts5227_switch_output_voltage, + .cd_deglitch = NULL, + .conv_clk_and_div_n = NULL, +}; + +/* SD Pull Control Enable: + * SD_DAT[3:0] ==> pull up + * SD_CD ==> pull up + * SD_WP ==> pull up + * SD_CMD ==> pull up + * SD_CLK ==> pull down + */ +static const u32 rts5227_sd_pull_ctl_enable_tbl[] = { + RTSX_REG_PAIR(CARD_PULL_CTL2, 0xAA), + RTSX_REG_PAIR(CARD_PULL_CTL3, 0xE9), + 0, +}; + +/* SD Pull Control Disable: + * SD_DAT[3:0] ==> pull down + * SD_CD ==> pull up + * SD_WP ==> pull down + * SD_CMD ==> pull down + * SD_CLK ==> pull down + */ +static const u32 rts5227_sd_pull_ctl_disable_tbl[] = { + RTSX_REG_PAIR(CARD_PULL_CTL2, 0x55), + RTSX_REG_PAIR(CARD_PULL_CTL3, 0xD5), + 0, +}; + +/* MS Pull Control Enable: + * MS CD ==> pull up + * others ==> pull down + */ +static const u32 rts5227_ms_pull_ctl_enable_tbl[] = { + RTSX_REG_PAIR(CARD_PULL_CTL5, 0x55), + RTSX_REG_PAIR(CARD_PULL_CTL6, 0x15), + 0, +}; + +/* MS Pull Control Disable: + * MS CD ==> pull up + * others ==> pull down + */ +static const u32 rts5227_ms_pull_ctl_disable_tbl[] = { + RTSX_REG_PAIR(CARD_PULL_CTL5, 0x55), + RTSX_REG_PAIR(CARD_PULL_CTL6, 0x15), + 0, +}; + +void rts5227_init_params(struct rtsx_pcr *pcr) +{ + pcr->extra_caps = EXTRA_CAPS_SD_SDR50 | EXTRA_CAPS_SD_SDR104; + pcr->num_slots = 2; + pcr->ops = &rts5227_pcr_ops; + + pcr->sd_pull_ctl_enable_tbl = rts5227_sd_pull_ctl_enable_tbl; + pcr->sd_pull_ctl_disable_tbl = rts5227_sd_pull_ctl_disable_tbl; + pcr->ms_pull_ctl_enable_tbl = rts5227_ms_pull_ctl_enable_tbl; + pcr->ms_pull_ctl_disable_tbl = rts5227_ms_pull_ctl_disable_tbl; +} diff --git a/drivers/mfd/rts5229.c b/drivers/mfd/rts5229.c index 29d889cbb9c5183262897bc5e29818c536bb227d..58af4dbe358623d2c45385ee5a5e6f31cb04344e 100644 --- a/drivers/mfd/rts5229.c +++ b/drivers/mfd/rts5229.c @@ -119,10 +119,18 @@ static int rts5229_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage) int err; if (voltage == OUTPUT_3V3) { + err = rtsx_pci_write_register(pcr, + SD30_DRIVE_SEL, 0x07, DRIVER_TYPE_D); + if (err < 0) + return err; err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4FC0 | 0x24); if (err < 0) return err; } else if (voltage == OUTPUT_1V8) { + err = rtsx_pci_write_register(pcr, + SD30_DRIVE_SEL, 0x07, DRIVER_TYPE_B); + if (err < 0) + return err; err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4C40 | 0x24); if (err < 0) return err; diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c index 9fc57009e22813fe257481b39352533f2fbd5d45..481a98a10ecde331aca22121427aa9d6ee5c4113 100644 --- a/drivers/mfd/rtsx_pcr.c +++ b/drivers/mfd/rtsx_pcr.c @@ -55,6 +55,7 @@ static DEFINE_PCI_DEVICE_TABLE(rtsx_pci_ids) = { { PCI_DEVICE(0x10EC, 0x5209), PCI_CLASS_OTHERS << 16, 0xFF0000 }, { PCI_DEVICE(0x10EC, 0x5229), PCI_CLASS_OTHERS << 16, 0xFF0000 }, { PCI_DEVICE(0x10EC, 0x5289), PCI_CLASS_OTHERS << 16, 0xFF0000 }, + { PCI_DEVICE(0x10EC, 0x5227), PCI_CLASS_OTHERS << 16, 0xFF0000 }, { 0, } }; @@ -325,7 +326,6 @@ static void rtsx_pci_add_sg_tbl(struct rtsx_pcr *pcr, val = ((u64)addr << 32) | ((u64)len << 12) | option; put_unaligned_le64(val, ptr); - ptr++; pcr->sgi++; } @@ -591,8 +591,7 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock, u8 ssc_depth, bool initial_mode, bool double_clk, bool vpclk) { int err, clk; - u8 N, min_N, max_N, clk_divider; - u8 mcu_cnt, div, max_div; + u8 n, clk_divider, mcu_cnt, div; u8 depth[] = { [RTSX_SSC_DEPTH_4M] = SSC_DEPTH_4M, [RTSX_SSC_DEPTH_2M] = SSC_DEPTH_2M, @@ -616,10 +615,6 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock, card_clock /= 1000000; dev_dbg(&(pcr->pci->dev), "Switch card clock to %dMHz\n", card_clock); - min_N = 80; - max_N = 208; - max_div = CLK_DIV_8; - clk = card_clock; if (!initial_mode && double_clk) clk = card_clock * 2; @@ -631,30 +626,30 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock, return 0; if (pcr->ops->conv_clk_and_div_n) - N = (u8)pcr->ops->conv_clk_and_div_n(clk, CLK_TO_DIV_N); + n = (u8)pcr->ops->conv_clk_and_div_n(clk, CLK_TO_DIV_N); else - N = (u8)(clk - 2); - if ((clk <= 2) || (N > max_N)) + n = (u8)(clk - 2); + if ((clk <= 2) || (n > MAX_DIV_N_PCR)) return -EINVAL; mcu_cnt = (u8)(125/clk + 3); if (mcu_cnt > 15) mcu_cnt = 15; - /* Make sure that the SSC clock div_n is equal or greater than min_N */ + /* Make sure that the SSC clock div_n is not less than MIN_DIV_N_PCR */ div = CLK_DIV_1; - while ((N < min_N) && (div < max_div)) { + while ((n < MIN_DIV_N_PCR) && (div < CLK_DIV_8)) { if (pcr->ops->conv_clk_and_div_n) { - int dbl_clk = pcr->ops->conv_clk_and_div_n(N, + int dbl_clk = pcr->ops->conv_clk_and_div_n(n, DIV_N_TO_CLK) * 2; - N = (u8)pcr->ops->conv_clk_and_div_n(dbl_clk, + n = (u8)pcr->ops->conv_clk_and_div_n(dbl_clk, CLK_TO_DIV_N); } else { - N = (N + 2) * 2 - 2; + n = (n + 2) * 2 - 2; } div++; } - dev_dbg(&(pcr->pci->dev), "N = %d, div = %d\n", N, div); + dev_dbg(&(pcr->pci->dev), "n = %d, div = %d\n", n, div); ssc_depth = depth[ssc_depth]; if (double_clk) @@ -671,7 +666,7 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock, rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL1, SSC_RSTB, 0); rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL2, SSC_DEPTH_MASK, ssc_depth); - rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_DIV_N_0, 0xFF, N); + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_DIV_N_0, 0xFF, n); rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL1, SSC_RSTB, SSC_RSTB); if (vpclk) { rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPCLK0_CTL, @@ -713,6 +708,25 @@ int rtsx_pci_card_power_off(struct rtsx_pcr *pcr, int card) } EXPORT_SYMBOL_GPL(rtsx_pci_card_power_off); +int rtsx_pci_card_exclusive_check(struct rtsx_pcr *pcr, int card) +{ + unsigned int cd_mask[] = { + [RTSX_SD_CARD] = SD_EXIST, + [RTSX_MS_CARD] = MS_EXIST + }; + + if (!pcr->ms_pmos) { + /* When using single PMOS, accessing card is not permitted + * if the existing card is not the designated one. + */ + if (pcr->card_exist & (~cd_mask[card])) + return -EIO; + } + + return 0; +} +EXPORT_SYMBOL_GPL(rtsx_pci_card_exclusive_check); + int rtsx_pci_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage) { if (pcr->ops->switch_output_voltage) @@ -758,7 +772,7 @@ static void rtsx_pci_card_detect(struct work_struct *work) struct delayed_work *dwork; struct rtsx_pcr *pcr; unsigned long flags; - unsigned int card_detect = 0; + unsigned int card_detect = 0, card_inserted, card_removed; u32 irq_status; dwork = to_delayed_work(work); @@ -766,25 +780,35 @@ static void rtsx_pci_card_detect(struct work_struct *work) dev_dbg(&(pcr->pci->dev), "--> %s\n", __func__); + mutex_lock(&pcr->pcr_mutex); spin_lock_irqsave(&pcr->lock, flags); irq_status = rtsx_pci_readl(pcr, RTSX_BIPR); dev_dbg(&(pcr->pci->dev), "irq_status: 0x%08x\n", irq_status); - if (pcr->card_inserted || pcr->card_removed) { + irq_status &= CARD_EXIST; + card_inserted = pcr->card_inserted & irq_status; + card_removed = pcr->card_removed; + pcr->card_inserted = 0; + pcr->card_removed = 0; + + spin_unlock_irqrestore(&pcr->lock, flags); + + if (card_inserted || card_removed) { dev_dbg(&(pcr->pci->dev), "card_inserted: 0x%x, card_removed: 0x%x\n", - pcr->card_inserted, pcr->card_removed); + card_inserted, card_removed); if (pcr->ops->cd_deglitch) - pcr->card_inserted = pcr->ops->cd_deglitch(pcr); + card_inserted = pcr->ops->cd_deglitch(pcr); + + card_detect = card_inserted | card_removed; - card_detect = pcr->card_inserted | pcr->card_removed; - pcr->card_inserted = 0; - pcr->card_removed = 0; + pcr->card_exist |= card_inserted; + pcr->card_exist &= ~card_removed; } - spin_unlock_irqrestore(&pcr->lock, flags); + mutex_unlock(&pcr->pcr_mutex); if ((card_detect & SD_EXIST) && pcr->slots[RTSX_SD_CARD].card_event) pcr->slots[RTSX_SD_CARD].card_event( @@ -836,10 +860,6 @@ static irqreturn_t rtsx_pci_isr(int irq, void *dev_id) } } - if (pcr->card_inserted || pcr->card_removed) - schedule_delayed_work(&pcr->carddet_work, - msecs_to_jiffies(200)); - if (int_reg & (NEED_COMPLETE_INT | DELINK_INT)) { if (int_reg & (TRANS_FAIL_INT | DELINK_INT)) { pcr->trans_result = TRANS_RESULT_FAIL; @@ -852,6 +872,10 @@ static irqreturn_t rtsx_pci_isr(int irq, void *dev_id) } } + if (pcr->card_inserted || pcr->card_removed) + schedule_delayed_work(&pcr->carddet_work, + msecs_to_jiffies(200)); + spin_unlock(&pcr->lock); return IRQ_HANDLED; } @@ -974,6 +998,14 @@ static int rtsx_pci_init_hw(struct rtsx_pcr *pcr) return err; } + /* No CD interrupt if probing driver with card inserted. + * So we need to initialize pcr->card_exist here. + */ + if (pcr->ops->cd_deglitch) + pcr->card_exist = pcr->ops->cd_deglitch(pcr); + else + pcr->card_exist = rtsx_pci_readl(pcr, RTSX_BIPR) & CARD_EXIST; + return 0; } @@ -997,6 +1029,10 @@ static int rtsx_pci_init_chip(struct rtsx_pcr *pcr) case 0x5289: rtl8411_init_params(pcr); break; + + case 0x5227: + rts5227_init_params(pcr); + break; } dev_dbg(&(pcr->pci->dev), "PID: 0x%04x, IC version: 0x%02x\n", @@ -1030,6 +1066,10 @@ static int rtsx_pci_probe(struct pci_dev *pcidev, pci_name(pcidev), (int)pcidev->vendor, (int)pcidev->device, (int)pcidev->revision); + ret = pci_set_dma_mask(pcidev, DMA_BIT_MASK(32)); + if (ret < 0) + return ret; + ret = pci_enable_device(pcidev); if (ret) return ret; diff --git a/drivers/mfd/rtsx_pcr.h b/drivers/mfd/rtsx_pcr.h index 12462c1df1a9dada032e8ca9a1fd729c6147d363..2b3ab8a048237c41c486989c689f60c37b7afe05 100644 --- a/drivers/mfd/rtsx_pcr.h +++ b/drivers/mfd/rtsx_pcr.h @@ -25,8 +25,12 @@ #include +#define MIN_DIV_N_PCR 80 +#define MAX_DIV_N_PCR 208 + void rts5209_init_params(struct rtsx_pcr *pcr); void rts5229_init_params(struct rtsx_pcr *pcr); void rtl8411_init_params(struct rtsx_pcr *pcr); +void rts5227_init_params(struct rtsx_pcr *pcr); #endif diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c index 3f10591ea94e9d2242bf8b79a6689703c93ed238..61aea6381cdf37675595dd3a9a7173ea3fc69eb9 100644 --- a/drivers/mfd/syscon.c +++ b/drivers/mfd/syscon.c @@ -20,6 +20,7 @@ #include #include #include +#include static struct platform_driver syscon_driver; diff --git a/drivers/mfd/tps6507x.c b/drivers/mfd/tps6507x.c index 409afa23d5dc0c2f4bf42278c76d780862c3cec3..5ad4b772b09797bec97c9759bb9c80e609102651 100644 --- a/drivers/mfd/tps6507x.c +++ b/drivers/mfd/tps6507x.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -116,11 +117,19 @@ static const struct i2c_device_id tps6507x_i2c_id[] = { }; MODULE_DEVICE_TABLE(i2c, tps6507x_i2c_id); +#ifdef CONFIG_OF +static struct of_device_id tps6507x_of_match[] = { + {.compatible = "ti,tps6507x", }, + {}, +}; +MODULE_DEVICE_TABLE(of, tps6507x_of_match); +#endif static struct i2c_driver tps6507x_i2c_driver = { .driver = { .name = "tps6507x", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(tps6507x_of_match), }, .probe = tps6507x_i2c_probe, .remove = tps6507x_i2c_remove, diff --git a/drivers/mfd/tps65090.c b/drivers/mfd/tps65090.c index 8d12a8e00d9c97ecfbfb477bd73515749ca5e663..98edb5be85c6b39d299d4dffdac7a081d60b1d83 100644 --- a/drivers/mfd/tps65090.c +++ b/drivers/mfd/tps65090.c @@ -25,6 +25,8 @@ #include #include #include +#include +#include #include #define NUM_INT_REG 2 @@ -148,18 +150,31 @@ static const struct regmap_config tps65090_regmap_config = { .volatile_reg = is_volatile_reg, }; +#ifdef CONFIG_OF +static const struct of_device_id tps65090_of_match[] = { + { .compatible = "ti,tps65090",}, + {}, +}; +MODULE_DEVICE_TABLE(of, tps65090_of_match); +#endif + static int tps65090_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct tps65090_platform_data *pdata = client->dev.platform_data; + int irq_base = 0; struct tps65090 *tps65090; int ret; - if (!pdata) { - dev_err(&client->dev, "tps65090 requires platform data\n"); + if (!pdata && !client->dev.of_node) { + dev_err(&client->dev, + "tps65090 requires platform data or of_node\n"); return -EINVAL; } + if (pdata) + irq_base = pdata->irq_base; + tps65090 = devm_kzalloc(&client->dev, sizeof(*tps65090), GFP_KERNEL); if (!tps65090) { dev_err(&client->dev, "mem alloc for tps65090 failed\n"); @@ -178,7 +193,7 @@ static int tps65090_i2c_probe(struct i2c_client *client, if (client->irq) { ret = regmap_add_irq_chip(tps65090->rmap, client->irq, - IRQF_ONESHOT | IRQF_TRIGGER_LOW, pdata->irq_base, + IRQF_ONESHOT | IRQF_TRIGGER_LOW, irq_base, &tps65090_irq_chip, &tps65090->irq_data); if (ret) { dev_err(&client->dev, @@ -189,7 +204,7 @@ static int tps65090_i2c_probe(struct i2c_client *client, ret = mfd_add_devices(tps65090->dev, -1, tps65090s, ARRAY_SIZE(tps65090s), NULL, - regmap_irq_chip_get_base(tps65090->irq_data), NULL); + 0, regmap_irq_get_domain(tps65090->irq_data)); if (ret) { dev_err(&client->dev, "add mfd devices failed with err: %d\n", ret); @@ -215,28 +230,6 @@ static int tps65090_i2c_remove(struct i2c_client *client) return 0; } -#ifdef CONFIG_PM_SLEEP -static int tps65090_suspend(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - if (client->irq) - disable_irq(client->irq); - return 0; -} - -static int tps65090_resume(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - if (client->irq) - enable_irq(client->irq); - return 0; -} -#endif - -static const struct dev_pm_ops tps65090_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(tps65090_suspend, tps65090_resume) -}; - static const struct i2c_device_id tps65090_id_table[] = { { "tps65090", 0 }, { }, @@ -247,7 +240,7 @@ static struct i2c_driver tps65090_driver = { .driver = { .name = "tps65090", .owner = THIS_MODULE, - .pm = &tps65090_pm_ops, + .of_match_table = of_match_ptr(tps65090_of_match), }, .probe = tps65090_i2c_probe, .remove = tps65090_i2c_remove, diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c index 4f3baadd0038e04f44d0a88856218edee23e5646..89ab4d9706431ba26fbfcc3a68e7a513daa8e164 100644 --- a/drivers/mfd/twl-core.c +++ b/drivers/mfd/twl-core.c @@ -66,16 +66,6 @@ /* Triton Core internal information (BEGIN) */ -#define TWL_NUM_SLAVES 4 - -#define SUB_CHIP_ID0 0 -#define SUB_CHIP_ID1 1 -#define SUB_CHIP_ID2 2 -#define SUB_CHIP_ID3 3 -#define SUB_CHIP_ID_INVAL 0xff - -#define TWL_MODULE_LAST TWL4030_MODULE_LAST - /* Base Address defns for twl4030_map[] */ /* subchip/slave 0 - USB ID */ @@ -94,10 +84,7 @@ #define TWL4030_BASEADD_MADC 0x0000 #define TWL4030_BASEADD_MAIN_CHARGE 0x0074 #define TWL4030_BASEADD_PRECHARGE 0x00AA -#define TWL4030_BASEADD_PWM0 0x00F8 -#define TWL4030_BASEADD_PWM1 0x00FB -#define TWL4030_BASEADD_PWMA 0x00EF -#define TWL4030_BASEADD_PWMB 0x00F1 +#define TWL4030_BASEADD_PWM 0x00F8 #define TWL4030_BASEADD_KEYPAD 0x00D2 #define TWL5031_BASEADD_ACCESSORY 0x0074 /* Replaces Main Charge */ @@ -117,7 +104,7 @@ /* subchip/slave 0 0x48 - POWER */ #define TWL6030_BASEADD_RTC 0x0000 -#define TWL6030_BASEADD_MEM 0x0017 +#define TWL6030_BASEADD_SECURED_REG 0x0017 #define TWL6030_BASEADD_PM_MASTER 0x001F #define TWL6030_BASEADD_PM_SLAVE_MISC 0x0030 /* PM_RECEIVER */ #define TWL6030_BASEADD_PM_MISC 0x00E2 @@ -132,6 +119,7 @@ #define TWL6030_BASEADD_PIH 0x00D0 #define TWL6030_BASEADD_CHARGER 0x00E0 #define TWL6025_BASEADD_CHARGER 0x00DA +#define TWL6030_BASEADD_LED 0x00F4 /* subchip/slave 2 0x4A - DFT */ #define TWL6030_BASEADD_DIEID 0x00C0 @@ -153,33 +141,28 @@ /*----------------------------------------------------------------------*/ -/* is driver active, bound to a chip? */ -static bool inuse; - -/* TWL IDCODE Register value */ -static u32 twl_idcode; - -static unsigned int twl_id; -unsigned int twl_rev(void) -{ - return twl_id; -} -EXPORT_SYMBOL(twl_rev); - /* Structure for each TWL4030/TWL6030 Slave */ struct twl_client { struct i2c_client *client; struct regmap *regmap; }; -static struct twl_client twl_modules[TWL_NUM_SLAVES]; - /* mapping the module id to slave id and base address */ struct twl_mapping { unsigned char sid; /* Slave ID */ unsigned char base; /* base address */ }; -static struct twl_mapping *twl_map; + +struct twl_private { + bool ready; /* The core driver is ready to be used */ + u32 twl_idcode; /* TWL IDCODE Register value */ + unsigned int twl_id; + + struct twl_mapping *twl_map; + struct twl_client *twl_modules; +}; + +static struct twl_private *twl_priv; static struct twl_mapping twl4030_map[] = { /* @@ -188,34 +171,33 @@ static struct twl_mapping twl4030_map[] = { * so they continue to match the order in this table. */ + /* Common IPs */ { 0, TWL4030_BASEADD_USB }, + { 1, TWL4030_BASEADD_PIH }, + { 2, TWL4030_BASEADD_MAIN_CHARGE }, + { 3, TWL4030_BASEADD_PM_MASTER }, + { 3, TWL4030_BASEADD_PM_RECEIVER }, + + { 3, TWL4030_BASEADD_RTC }, + { 2, TWL4030_BASEADD_PWM }, + { 2, TWL4030_BASEADD_LED }, + { 3, TWL4030_BASEADD_SECURED_REG }, + + /* TWL4030 specific IPs */ { 1, TWL4030_BASEADD_AUDIO_VOICE }, { 1, TWL4030_BASEADD_GPIO }, { 1, TWL4030_BASEADD_INTBR }, - { 1, TWL4030_BASEADD_PIH }, - { 1, TWL4030_BASEADD_TEST }, { 2, TWL4030_BASEADD_KEYPAD }, + { 2, TWL4030_BASEADD_MADC }, { 2, TWL4030_BASEADD_INTERRUPTS }, - { 2, TWL4030_BASEADD_LED }, - - { 2, TWL4030_BASEADD_MAIN_CHARGE }, { 2, TWL4030_BASEADD_PRECHARGE }, - { 2, TWL4030_BASEADD_PWM0 }, - { 2, TWL4030_BASEADD_PWM1 }, - { 2, TWL4030_BASEADD_PWMA }, - - { 2, TWL4030_BASEADD_PWMB }, - { 2, TWL5031_BASEADD_ACCESSORY }, - { 2, TWL5031_BASEADD_INTERRUPTS }, { 3, TWL4030_BASEADD_BACKUP }, { 3, TWL4030_BASEADD_INT }, - { 3, TWL4030_BASEADD_PM_MASTER }, - { 3, TWL4030_BASEADD_PM_RECEIVER }, - { 3, TWL4030_BASEADD_RTC }, - { 3, TWL4030_BASEADD_SECURED_REG }, + { 2, TWL5031_BASEADD_ACCESSORY }, + { 2, TWL5031_BASEADD_INTERRUPTS }, }; static struct regmap_config twl4030_regmap_config[4] = { @@ -251,35 +233,25 @@ static struct twl_mapping twl6030_map[] = { * defines for TWL4030_MODULE_* * so they continue to match the order in this table. */ - { SUB_CHIP_ID1, TWL6030_BASEADD_USB }, - { SUB_CHIP_ID_INVAL, TWL6030_BASEADD_AUDIO }, - { SUB_CHIP_ID2, TWL6030_BASEADD_DIEID }, - { SUB_CHIP_ID2, TWL6030_BASEADD_RSV }, - { SUB_CHIP_ID1, TWL6030_BASEADD_PIH }, - - { SUB_CHIP_ID2, TWL6030_BASEADD_RSV }, - { SUB_CHIP_ID2, TWL6030_BASEADD_RSV }, - { SUB_CHIP_ID1, TWL6030_BASEADD_GPADC_CTRL }, - { SUB_CHIP_ID2, TWL6030_BASEADD_RSV }, - { SUB_CHIP_ID2, TWL6030_BASEADD_RSV }, - - { SUB_CHIP_ID1, TWL6030_BASEADD_CHARGER }, - { SUB_CHIP_ID1, TWL6030_BASEADD_GASGAUGE }, - { SUB_CHIP_ID1, TWL6030_BASEADD_PWM }, - { SUB_CHIP_ID0, TWL6030_BASEADD_ZERO }, - { SUB_CHIP_ID1, TWL6030_BASEADD_ZERO }, - - { SUB_CHIP_ID2, TWL6030_BASEADD_ZERO }, - { SUB_CHIP_ID2, TWL6030_BASEADD_ZERO }, - { SUB_CHIP_ID2, TWL6030_BASEADD_RSV }, - { SUB_CHIP_ID2, TWL6030_BASEADD_RSV }, - { SUB_CHIP_ID2, TWL6030_BASEADD_RSV }, - - { SUB_CHIP_ID0, TWL6030_BASEADD_PM_MASTER }, - { SUB_CHIP_ID0, TWL6030_BASEADD_PM_SLAVE_MISC }, - { SUB_CHIP_ID0, TWL6030_BASEADD_RTC }, - { SUB_CHIP_ID0, TWL6030_BASEADD_MEM }, - { SUB_CHIP_ID1, TWL6025_BASEADD_CHARGER }, + + /* Common IPs */ + { 1, TWL6030_BASEADD_USB }, + { 1, TWL6030_BASEADD_PIH }, + { 1, TWL6030_BASEADD_CHARGER }, + { 0, TWL6030_BASEADD_PM_MASTER }, + { 0, TWL6030_BASEADD_PM_SLAVE_MISC }, + + { 0, TWL6030_BASEADD_RTC }, + { 1, TWL6030_BASEADD_PWM }, + { 1, TWL6030_BASEADD_LED }, + { 0, TWL6030_BASEADD_SECURED_REG }, + + /* TWL6030 specific IPs */ + { 0, TWL6030_BASEADD_ZERO }, + { 1, TWL6030_BASEADD_ZERO }, + { 2, TWL6030_BASEADD_ZERO }, + { 1, TWL6030_BASEADD_GPADC_CTRL }, + { 1, TWL6030_BASEADD_GASGAUGE }, }; static struct regmap_config twl6030_regmap_config[3] = { @@ -305,8 +277,30 @@ static struct regmap_config twl6030_regmap_config[3] = { /*----------------------------------------------------------------------*/ +static inline int twl_get_num_slaves(void) +{ + if (twl_class_is_4030()) + return 4; /* TWL4030 class have four slave address */ + else + return 3; /* TWL6030 class have three slave address */ +} + +static inline int twl_get_last_module(void) +{ + if (twl_class_is_4030()) + return TWL4030_MODULE_LAST; + else + return TWL6030_MODULE_LAST; +} + /* Exported Functions */ +unsigned int twl_rev(void) +{ + return twl_priv ? twl_priv->twl_id : 0; +} +EXPORT_SYMBOL(twl_rev); + /** * twl_i2c_write - Writes a n bit register in TWL4030/TWL5030/TWL60X0 * @mod_no: module number @@ -314,9 +308,6 @@ static struct regmap_config twl6030_regmap_config[3] = { * @reg: register address (just offset will do) * @num_bytes: number of bytes to transfer * - * IMPORTANT: for 'value' parameter: Allocate value num_bytes+1 and - * valid data starts at Offset 1. - * * Returns the result of operation - 0 is success */ int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) @@ -325,24 +316,21 @@ int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) int sid; struct twl_client *twl; - if (unlikely(mod_no >= TWL_MODULE_LAST)) { - pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no); - return -EPERM; - } - if (unlikely(!inuse)) { + if (unlikely(!twl_priv || !twl_priv->ready)) { pr_err("%s: not initialized\n", DRIVER_NAME); return -EPERM; } - sid = twl_map[mod_no].sid; - if (unlikely(sid == SUB_CHIP_ID_INVAL)) { - pr_err("%s: module %d is not part of the pmic\n", - DRIVER_NAME, mod_no); - return -EINVAL; + if (unlikely(mod_no >= twl_get_last_module())) { + pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no); + return -EPERM; } - twl = &twl_modules[sid]; - ret = regmap_bulk_write(twl->regmap, twl_map[mod_no].base + reg, - value, num_bytes); + sid = twl_priv->twl_map[mod_no].sid; + twl = &twl_priv->twl_modules[sid]; + + ret = regmap_bulk_write(twl->regmap, + twl_priv->twl_map[mod_no].base + reg, value, + num_bytes); if (ret) pr_err("%s: Write failed (mod %d, reg 0x%02x count %d)\n", @@ -367,24 +355,21 @@ int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) int sid; struct twl_client *twl; - if (unlikely(mod_no >= TWL_MODULE_LAST)) { - pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no); - return -EPERM; - } - if (unlikely(!inuse)) { + if (unlikely(!twl_priv || !twl_priv->ready)) { pr_err("%s: not initialized\n", DRIVER_NAME); return -EPERM; } - sid = twl_map[mod_no].sid; - if (unlikely(sid == SUB_CHIP_ID_INVAL)) { - pr_err("%s: module %d is not part of the pmic\n", - DRIVER_NAME, mod_no); - return -EINVAL; + if (unlikely(mod_no >= twl_get_last_module())) { + pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no); + return -EPERM; } - twl = &twl_modules[sid]; - ret = regmap_bulk_read(twl->regmap, twl_map[mod_no].base + reg, - value, num_bytes); + sid = twl_priv->twl_map[mod_no].sid; + twl = &twl_priv->twl_modules[sid]; + + ret = regmap_bulk_read(twl->regmap, + twl_priv->twl_map[mod_no].base + reg, value, + num_bytes); if (ret) pr_err("%s: Read failed (mod %d, reg 0x%02x count %d)\n", @@ -394,34 +379,6 @@ int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) } EXPORT_SYMBOL(twl_i2c_read); -/** - * twl_i2c_write_u8 - Writes a 8 bit register in TWL4030/TWL5030/TWL60X0 - * @mod_no: module number - * @value: the value to be written 8 bit - * @reg: register address (just offset will do) - * - * Returns result of operation - 0 is success - */ -int twl_i2c_write_u8(u8 mod_no, u8 value, u8 reg) -{ - return twl_i2c_write(mod_no, &value, reg, 1); -} -EXPORT_SYMBOL(twl_i2c_write_u8); - -/** - * twl_i2c_read_u8 - Reads a 8 bit register from TWL4030/TWL5030/TWL60X0 - * @mod_no: module number - * @value: the value read 8 bit - * @reg: register address (just offset will do) - * - * Returns result of operation - 0 is success - */ -int twl_i2c_read_u8(u8 mod_no, u8 *value, u8 reg) -{ - return twl_i2c_read(mod_no, value, reg, 1); -} -EXPORT_SYMBOL(twl_i2c_read_u8); - /*----------------------------------------------------------------------*/ /** @@ -440,7 +397,7 @@ static int twl_read_idcode_register(void) goto fail; } - err = twl_i2c_read(TWL4030_MODULE_INTBR, (u8 *)(&twl_idcode), + err = twl_i2c_read(TWL4030_MODULE_INTBR, (u8 *)(&twl_priv->twl_idcode), REG_IDCODE_7_0, 4); if (err) { pr_err("TWL4030: unable to read IDCODE -%d\n", err); @@ -461,7 +418,7 @@ static int twl_read_idcode_register(void) */ int twl_get_type(void) { - return TWL_SIL_TYPE(twl_idcode); + return TWL_SIL_TYPE(twl_priv->twl_idcode); } EXPORT_SYMBOL_GPL(twl_get_type); @@ -472,7 +429,7 @@ EXPORT_SYMBOL_GPL(twl_get_type); */ int twl_get_version(void) { - return TWL_SIL_REV(twl_idcode); + return TWL_SIL_REV(twl_priv->twl_idcode); } EXPORT_SYMBOL_GPL(twl_get_version); @@ -509,13 +466,20 @@ int twl_get_hfclk_rate(void) EXPORT_SYMBOL_GPL(twl_get_hfclk_rate); static struct device * -add_numbered_child(unsigned chip, const char *name, int num, +add_numbered_child(unsigned mod_no, const char *name, int num, void *pdata, unsigned pdata_len, bool can_wakeup, int irq0, int irq1) { struct platform_device *pdev; - struct twl_client *twl = &twl_modules[chip]; - int status; + struct twl_client *twl; + int status, sid; + + if (unlikely(mod_no >= twl_get_last_module())) { + pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no); + return ERR_PTR(-EPERM); + } + sid = twl_priv->twl_map[mod_no].sid; + twl = &twl_priv->twl_modules[sid]; pdev = platform_device_alloc(name, num); if (!pdev) { @@ -560,11 +524,11 @@ add_numbered_child(unsigned chip, const char *name, int num, return &pdev->dev; } -static inline struct device *add_child(unsigned chip, const char *name, +static inline struct device *add_child(unsigned mod_no, const char *name, void *pdata, unsigned pdata_len, bool can_wakeup, int irq0, int irq1) { - return add_numbered_child(chip, name, -1, pdata, pdata_len, + return add_numbered_child(mod_no, name, -1, pdata, pdata_len, can_wakeup, irq0, irq1); } @@ -573,7 +537,6 @@ add_regulator_linked(int num, struct regulator_init_data *pdata, struct regulator_consumer_supply *consumers, unsigned num_consumers, unsigned long features) { - unsigned sub_chip_id; struct twl_regulator_driver_data drv_data; /* regulator framework demands init_data ... */ @@ -600,8 +563,7 @@ add_regulator_linked(int num, struct regulator_init_data *pdata, } /* NOTE: we currently ignore regulator IRQs, e.g. for short circuits */ - sub_chip_id = twl_map[TWL_MODULE_PM_MASTER].sid; - return add_numbered_child(sub_chip_id, "twl_reg", num, + return add_numbered_child(TWL_MODULE_PM_MASTER, "twl_reg", num, pdata, sizeof(*pdata), false, 0, 0); } @@ -623,10 +585,9 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base, unsigned long features) { struct device *child; - unsigned sub_chip_id; if (IS_ENABLED(CONFIG_GPIO_TWL4030) && pdata->gpio) { - child = add_child(SUB_CHIP_ID1, "twl4030_gpio", + child = add_child(TWL4030_MODULE_GPIO, "twl4030_gpio", pdata->gpio, sizeof(*pdata->gpio), false, irq_base + GPIO_INTR_OFFSET, 0); if (IS_ERR(child)) @@ -634,7 +595,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base, } if (IS_ENABLED(CONFIG_KEYBOARD_TWL4030) && pdata->keypad) { - child = add_child(SUB_CHIP_ID2, "twl4030_keypad", + child = add_child(TWL4030_MODULE_KEYPAD, "twl4030_keypad", pdata->keypad, sizeof(*pdata->keypad), true, irq_base + KEYPAD_INTR_OFFSET, 0); if (IS_ERR(child)) @@ -643,7 +604,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base, if (IS_ENABLED(CONFIG_TWL4030_MADC) && pdata->madc && twl_class_is_4030()) { - child = add_child(SUB_CHIP_ID2, "twl4030_madc", + child = add_child(TWL4030_MODULE_MADC, "twl4030_madc", pdata->madc, sizeof(*pdata->madc), true, irq_base + MADC_INTR_OFFSET, 0); if (IS_ERR(child)) @@ -658,22 +619,21 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base, * Eventually, Linux might become more aware of such * HW security concerns, and "least privilege". */ - sub_chip_id = twl_map[TWL_MODULE_RTC].sid; - child = add_child(sub_chip_id, "twl_rtc", NULL, 0, + child = add_child(TWL_MODULE_RTC, "twl_rtc", NULL, 0, true, irq_base + RTC_INTR_OFFSET, 0); if (IS_ERR(child)) return PTR_ERR(child); } if (IS_ENABLED(CONFIG_PWM_TWL)) { - child = add_child(SUB_CHIP_ID1, "twl-pwm", NULL, 0, + child = add_child(TWL_MODULE_PWM, "twl-pwm", NULL, 0, false, 0, 0); if (IS_ERR(child)) return PTR_ERR(child); } if (IS_ENABLED(CONFIG_PWM_TWL_LED)) { - child = add_child(SUB_CHIP_ID1, "twl-pwmled", NULL, 0, + child = add_child(TWL_MODULE_LED, "twl-pwmled", NULL, 0, false, 0, 0); if (IS_ERR(child)) return PTR_ERR(child); @@ -725,7 +685,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base, } - child = add_child(SUB_CHIP_ID0, "twl4030_usb", + child = add_child(TWL_MODULE_USB, "twl4030_usb", pdata->usb, sizeof(*pdata->usb), true, /* irq0 = USB_PRES, irq1 = USB */ irq_base + USB_PRES_INTR_OFFSET, @@ -774,7 +734,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base, pdata->usb->features = features; - child = add_child(SUB_CHIP_ID0, "twl6030_usb", + child = add_child(TWL_MODULE_USB, "twl6030_usb", pdata->usb, sizeof(*pdata->usb), true, /* irq1 = VBUS_PRES, irq0 = USB ID */ irq_base + USBOTG_INTR_OFFSET, @@ -799,22 +759,22 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base, } if (IS_ENABLED(CONFIG_TWL4030_WATCHDOG) && twl_class_is_4030()) { - child = add_child(SUB_CHIP_ID3, "twl4030_wdt", NULL, 0, - false, 0, 0); + child = add_child(TWL_MODULE_PM_RECEIVER, "twl4030_wdt", NULL, + 0, false, 0, 0); if (IS_ERR(child)) return PTR_ERR(child); } if (IS_ENABLED(CONFIG_INPUT_TWL4030_PWRBUTTON) && twl_class_is_4030()) { - child = add_child(SUB_CHIP_ID3, "twl4030_pwrbutton", NULL, 0, - true, irq_base + 8 + 0, 0); + child = add_child(TWL_MODULE_PM_MASTER, "twl4030_pwrbutton", + NULL, 0, true, irq_base + 8 + 0, 0); if (IS_ERR(child)) return PTR_ERR(child); } if (IS_ENABLED(CONFIG_MFD_TWL4030_AUDIO) && pdata->audio && twl_class_is_4030()) { - child = add_child(SUB_CHIP_ID1, "twl4030-audio", + child = add_child(TWL4030_MODULE_AUDIO_VOICE, "twl4030-audio", pdata->audio, sizeof(*pdata->audio), false, 0, 0); if (IS_ERR(child)) @@ -1054,7 +1014,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base, if (IS_ENABLED(CONFIG_CHARGER_TWL4030) && pdata->bci && !(features & (TPS_SUBSET | TWL5031))) { - child = add_child(SUB_CHIP_ID3, "twl4030_bci", + child = add_child(TWL_MODULE_MAIN_CHARGE, "twl4030_bci", pdata->bci, sizeof(*pdata->bci), false, /* irq0 = CHG_PRES, irq1 = BCI */ irq_base + BCI_PRES_INTR_OFFSET, @@ -1145,25 +1105,23 @@ static int twl_remove(struct i2c_client *client) unsigned i, num_slaves; int status; - if (twl_class_is_4030()) { + if (twl_class_is_4030()) status = twl4030_exit_irq(); - num_slaves = TWL_NUM_SLAVES; - } else { + else status = twl6030_exit_irq(); - num_slaves = TWL_NUM_SLAVES - 1; - } if (status < 0) return status; + num_slaves = twl_get_num_slaves(); for (i = 0; i < num_slaves; i++) { - struct twl_client *twl = &twl_modules[i]; + struct twl_client *twl = &twl_priv->twl_modules[i]; if (twl->client && twl->client != client) i2c_unregister_device(twl->client); - twl_modules[i].client = NULL; + twl->client = NULL; } - inuse = false; + twl_priv->ready = false; return 0; } @@ -1179,6 +1137,17 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id) int status; unsigned i, num_slaves; + if (!node && !pdata) { + dev_err(&client->dev, "no platform data\n"); + return -EINVAL; + } + + if (twl_priv) { + dev_dbg(&client->dev, "only one instance of %s allowed\n", + DRIVER_NAME); + return -EBUSY; + } + pdev = platform_device_alloc(DRIVER_NAME, -1); if (!pdev) { dev_err(&client->dev, "can't alloc pdev\n"); @@ -1191,54 +1160,44 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id) return status; } - if (node && !pdata) { - /* - * XXX: Temporary pdata until the information is correctly - * retrieved by every TWL modules from DT. - */ - pdata = devm_kzalloc(&client->dev, - sizeof(struct twl4030_platform_data), - GFP_KERNEL); - if (!pdata) { - status = -ENOMEM; - goto free; - } - } - - if (!pdata) { - dev_dbg(&client->dev, "no platform data?\n"); - status = -EINVAL; - goto free; - } - - platform_set_drvdata(pdev, pdata); - if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) == 0) { dev_dbg(&client->dev, "can't talk I2C?\n"); status = -EIO; goto free; } - if (inuse) { - dev_dbg(&client->dev, "driver is already in use\n"); - status = -EBUSY; + twl_priv = devm_kzalloc(&client->dev, sizeof(struct twl_private), + GFP_KERNEL); + if (!twl_priv) { + status = -ENOMEM; goto free; } if ((id->driver_data) & TWL6030_CLASS) { - twl_id = TWL6030_CLASS_ID; - twl_map = &twl6030_map[0]; + twl_priv->twl_id = TWL6030_CLASS_ID; + twl_priv->twl_map = &twl6030_map[0]; + /* The charger base address is different in twl6025 */ + if ((id->driver_data) & TWL6025_SUBCLASS) + twl_priv->twl_map[TWL_MODULE_MAIN_CHARGE].base = + TWL6025_BASEADD_CHARGER; twl_regmap_config = twl6030_regmap_config; - num_slaves = TWL_NUM_SLAVES - 1; } else { - twl_id = TWL4030_CLASS_ID; - twl_map = &twl4030_map[0]; + twl_priv->twl_id = TWL4030_CLASS_ID; + twl_priv->twl_map = &twl4030_map[0]; twl_regmap_config = twl4030_regmap_config; - num_slaves = TWL_NUM_SLAVES; + } + + num_slaves = twl_get_num_slaves(); + twl_priv->twl_modules = devm_kzalloc(&client->dev, + sizeof(struct twl_client) * num_slaves, + GFP_KERNEL); + if (!twl_priv->twl_modules) { + status = -ENOMEM; + goto free; } for (i = 0; i < num_slaves; i++) { - struct twl_client *twl = &twl_modules[i]; + struct twl_client *twl = &twl_priv->twl_modules[i]; if (i == 0) { twl->client = client; @@ -1264,19 +1223,19 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id) } } - inuse = true; + twl_priv->ready = true; /* setup clock framework */ - clocks_init(&pdev->dev, pdata->clock); + clocks_init(&pdev->dev, pdata ? pdata->clock : NULL); /* read TWL IDCODE Register */ - if (twl_id == TWL4030_CLASS_ID) { + if (twl_class_is_4030()) { status = twl_read_idcode_register(); WARN(status < 0, "Error: reading twl_idcode register value\n"); } /* load power event scripts */ - if (IS_ENABLED(CONFIG_TWL4030_POWER) && pdata->power) + if (IS_ENABLED(CONFIG_TWL4030_POWER) && pdata && pdata->power) twl4030_power_init(pdata->power); /* Maybe init the T2 Interrupt subsystem */ @@ -1308,10 +1267,9 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id) twl_i2c_write_u8(TWL4030_MODULE_INTBR, temp, REG_GPPUPDCTR1); } - status = -ENODEV; if (node) status = of_platform_populate(node, NULL, NULL, &client->dev); - if (status) + else status = add_children(pdata, irq_base, id->driver_data); fail: diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c index 558c2928f2613f9011b00dafcbac5da71e0551d4..bf75e967a1f304f1b102d275464353c2067319b4 100644 --- a/drivers/mfd/vexpress-sysreg.c +++ b/drivers/mfd/vexpress-sysreg.c @@ -49,6 +49,8 @@ #define SYS_ID_HBI_SHIFT 16 #define SYS_PROCIDx_HBI_SHIFT 0 +#define SYS_LED_LED(n) (1 << (n)) + #define SYS_MCI_CARDIN (1 << 0) #define SYS_MCI_WPROT (1 << 1) @@ -336,34 +338,40 @@ void __init vexpress_sysreg_early_init(void __iomem *base) void __init vexpress_sysreg_of_early_init(void) { - struct device_node *node = of_find_compatible_node(NULL, NULL, - "arm,vexpress-sysreg"); + struct device_node *node; + + if (vexpress_sysreg_base) + return; + node = of_find_compatible_node(NULL, NULL, "arm,vexpress-sysreg"); if (node) { vexpress_sysreg_base = of_iomap(node, 0); vexpress_sysreg_setup(node); - } else { - pr_info("vexpress-sysreg: No Device Tree node found."); } } +#define VEXPRESS_SYSREG_GPIO(_name, _reg, _value) \ + [VEXPRESS_GPIO_##_name] = { \ + .reg = _reg, \ + .value = _reg##_##_value, \ + } + static struct vexpress_sysreg_gpio { unsigned long reg; u32 value; } vexpress_sysreg_gpios[] = { - [VEXPRESS_GPIO_MMC_CARDIN] = { - .reg = SYS_MCI, - .value = SYS_MCI_CARDIN, - }, - [VEXPRESS_GPIO_MMC_WPROT] = { - .reg = SYS_MCI, - .value = SYS_MCI_WPROT, - }, - [VEXPRESS_GPIO_FLASH_WPn] = { - .reg = SYS_FLASH, - .value = SYS_FLASH_WPn, - }, + VEXPRESS_SYSREG_GPIO(MMC_CARDIN, SYS_MCI, CARDIN), + VEXPRESS_SYSREG_GPIO(MMC_WPROT, SYS_MCI, WPROT), + VEXPRESS_SYSREG_GPIO(FLASH_WPn, SYS_FLASH, WPn), + VEXPRESS_SYSREG_GPIO(LED0, SYS_LED, LED(0)), + VEXPRESS_SYSREG_GPIO(LED1, SYS_LED, LED(1)), + VEXPRESS_SYSREG_GPIO(LED2, SYS_LED, LED(2)), + VEXPRESS_SYSREG_GPIO(LED3, SYS_LED, LED(3)), + VEXPRESS_SYSREG_GPIO(LED4, SYS_LED, LED(4)), + VEXPRESS_SYSREG_GPIO(LED5, SYS_LED, LED(5)), + VEXPRESS_SYSREG_GPIO(LED6, SYS_LED, LED(6)), + VEXPRESS_SYSREG_GPIO(LED7, SYS_LED, LED(7)), }; static int vexpress_sysreg_gpio_direction_input(struct gpio_chip *chip, @@ -372,12 +380,6 @@ static int vexpress_sysreg_gpio_direction_input(struct gpio_chip *chip, return 0; } -static int vexpress_sysreg_gpio_direction_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - return 0; -} - static int vexpress_sysreg_gpio_get(struct gpio_chip *chip, unsigned offset) { @@ -401,6 +403,14 @@ static void vexpress_sysreg_gpio_set(struct gpio_chip *chip, writel(reg_value, vexpress_sysreg_base + gpio->reg); } +static int vexpress_sysreg_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + vexpress_sysreg_gpio_set(chip, offset, value); + + return 0; +} + static struct gpio_chip vexpress_sysreg_gpio_chip = { .label = "vexpress-sysreg", .direction_input = vexpress_sysreg_gpio_direction_input, @@ -412,6 +422,30 @@ static struct gpio_chip vexpress_sysreg_gpio_chip = { }; +#define VEXPRESS_SYSREG_GREEN_LED(_name, _default_trigger, _gpio) \ + { \ + .name = "v2m:green:"_name, \ + .default_trigger = _default_trigger, \ + .gpio = VEXPRESS_GPIO_##_gpio, \ + } + +struct gpio_led vexpress_sysreg_leds[] = { + VEXPRESS_SYSREG_GREEN_LED("user1", "heartbeat", LED0), + VEXPRESS_SYSREG_GREEN_LED("user2", "mmc0", LED1), + VEXPRESS_SYSREG_GREEN_LED("user3", "cpu0", LED2), + VEXPRESS_SYSREG_GREEN_LED("user4", "cpu1", LED3), + VEXPRESS_SYSREG_GREEN_LED("user5", "cpu2", LED4), + VEXPRESS_SYSREG_GREEN_LED("user6", "cpu3", LED5), + VEXPRESS_SYSREG_GREEN_LED("user7", "cpu4", LED6), + VEXPRESS_SYSREG_GREEN_LED("user8", "cpu5", LED7), +}; + +struct gpio_led_platform_data vexpress_sysreg_leds_pdata = { + .num_leds = ARRAY_SIZE(vexpress_sysreg_leds), + .leds = vexpress_sysreg_leds, +}; + + static ssize_t vexpress_sysreg_sys_id_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -456,6 +490,10 @@ static int vexpress_sysreg_probe(struct platform_device *pdev) return err; } + platform_device_register_data(vexpress_sysreg_dev, "leds-gpio", + PLATFORM_DEVID_AUTO, &vexpress_sysreg_leds_pdata, + sizeof(vexpress_sysreg_leds_pdata)); + vexpress_sysreg_dev = &pdev->dev; device_create_file(vexpress_sysreg_dev, &dev_attr_sys_id); @@ -478,6 +516,7 @@ static struct platform_driver vexpress_sysreg_driver = { static int __init vexpress_sysreg_init(void) { + vexpress_sysreg_of_early_init(); return platform_driver_register(&vexpress_sysreg_driver); } core_initcall(vexpress_sysreg_init); diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c index a9d9d41d95d342df8bcc95fa38055ac0bd47bec5..a433f580aa4c4edb94810685684e317a6afd3575 100644 --- a/drivers/mfd/wm5102-tables.c +++ b/drivers/mfd/wm5102-tables.c @@ -59,12 +59,13 @@ static const struct reg_default wm5102_reva_patch[] = { static const struct reg_default wm5102_revb_patch[] = { { 0x80, 0x0003 }, { 0x081, 0xE022 }, - { 0x410, 0x6080 }, - { 0x418, 0x6080 }, - { 0x420, 0x6080 }, + { 0x410, 0x4080 }, + { 0x418, 0x4080 }, + { 0x420, 0x4080 }, { 0x428, 0xC000 }, - { 0x441, 0x8014 }, + { 0x4B0, 0x0066 }, { 0x458, 0x000b }, + { 0x212, 0x0000 }, { 0x80, 0x0000 }, }; @@ -231,11 +232,9 @@ const struct regmap_irq_chip wm5102_irq = { static const struct reg_default wm5102_reg_default[] = { { 0x00000008, 0x0019 }, /* R8 - Ctrl IF SPI CFG 1 */ { 0x00000009, 0x0001 }, /* R9 - Ctrl IF I2C1 CFG 1 */ - { 0x0000000D, 0x0000 }, /* R13 - Ctrl IF Status 1 */ { 0x00000016, 0x0000 }, /* R22 - Write Sequencer Ctrl 0 */ { 0x00000017, 0x0000 }, /* R23 - Write Sequencer Ctrl 1 */ { 0x00000018, 0x0000 }, /* R24 - Write Sequencer Ctrl 2 */ - { 0x0000001A, 0x0000 }, /* R26 - Write Sequencer PROM */ { 0x00000020, 0x0000 }, /* R32 - Tone Generator 1 */ { 0x00000021, 0x1000 }, /* R33 - Tone Generator 2 */ { 0x00000022, 0x0000 }, /* R34 - Tone Generator 3 */ @@ -250,12 +249,14 @@ static const struct reg_default wm5102_reg_default[] = { { 0x00000062, 0x01FF }, /* R98 - Sample Rate Sequence Select 2 */ { 0x00000063, 0x01FF }, /* R99 - Sample Rate Sequence Select 3 */ { 0x00000064, 0x01FF }, /* R100 - Sample Rate Sequence Select 4 */ - { 0x00000068, 0x01FF }, /* R104 - Always On Triggers Sequence Select 1 */ - { 0x00000069, 0x01FF }, /* R105 - Always On Triggers Sequence Select 2 */ - { 0x0000006A, 0x01FF }, /* R106 - Always On Triggers Sequence Select 3 */ - { 0x0000006B, 0x01FF }, /* R107 - Always On Triggers Sequence Select 4 */ - { 0x0000006C, 0x01FF }, /* R108 - Always On Triggers Sequence Select 5 */ - { 0x0000006D, 0x01FF }, /* R109 - Always On Triggers Sequence Select 6 */ + { 0x00000066, 0x01FF }, /* R102 - Always On Triggers Sequence Select 1 */ + { 0x00000067, 0x01FF }, /* R103 - Always On Triggers Sequence Select 2 */ + { 0x00000068, 0x01FF }, /* R104 - Always On Triggers Sequence Select 3 */ + { 0x00000069, 0x01FF }, /* R105 - Always On Triggers Sequence Select 4 */ + { 0x0000006A, 0x01FF }, /* R106 - Always On Triggers Sequence Select 5 */ + { 0x0000006B, 0x01FF }, /* R107 - Always On Triggers Sequence Select 6 */ + { 0x0000006E, 0x01FF }, /* R110 - Trigger Sequence Select 32 */ + { 0x0000006F, 0x01FF }, /* R111 - Trigger Sequence Select 33 */ { 0x00000070, 0x0000 }, /* R112 - Comfort Noise Generator */ { 0x00000090, 0x0000 }, /* R144 - Haptics Control 1 */ { 0x00000091, 0x7FFF }, /* R145 - Haptics Control 2 */ @@ -265,13 +266,14 @@ static const struct reg_default wm5102_reg_default[] = { { 0x00000095, 0x0000 }, /* R149 - Haptics phase 2 duration */ { 0x00000096, 0x0000 }, /* R150 - Haptics phase 3 intensity */ { 0x00000097, 0x0000 }, /* R151 - Haptics phase 3 duration */ - { 0x00000100, 0x0001 }, /* R256 - Clock 32k 1 */ + { 0x00000100, 0x0002 }, /* R256 - Clock 32k 1 */ { 0x00000101, 0x0304 }, /* R257 - System Clock 1 */ { 0x00000102, 0x0011 }, /* R258 - Sample rate 1 */ { 0x00000103, 0x0011 }, /* R259 - Sample rate 2 */ { 0x00000104, 0x0011 }, /* R260 - Sample rate 3 */ { 0x00000112, 0x0305 }, /* R274 - Async clock 1 */ { 0x00000113, 0x0011 }, /* R275 - Async sample rate 1 */ + { 0x00000114, 0x0011 }, /* R276 - Async sample rate 2 */ { 0x00000149, 0x0000 }, /* R329 - Output system clock */ { 0x0000014A, 0x0000 }, /* R330 - Output async clock */ { 0x00000152, 0x0000 }, /* R338 - Rate Estimator 1 */ @@ -280,13 +282,14 @@ static const struct reg_default wm5102_reg_default[] = { { 0x00000155, 0x0000 }, /* R341 - Rate Estimator 4 */ { 0x00000156, 0x0000 }, /* R342 - Rate Estimator 5 */ { 0x00000161, 0x0000 }, /* R353 - Dynamic Frequency Scaling 1 */ - { 0x00000171, 0x0000 }, /* R369 - FLL1 Control 1 */ + { 0x00000171, 0x0002 }, /* R369 - FLL1 Control 1 */ { 0x00000172, 0x0008 }, /* R370 - FLL1 Control 2 */ { 0x00000173, 0x0018 }, /* R371 - FLL1 Control 3 */ { 0x00000174, 0x007D }, /* R372 - FLL1 Control 4 */ { 0x00000175, 0x0004 }, /* R373 - FLL1 Control 5 */ { 0x00000176, 0x0000 }, /* R374 - FLL1 Control 6 */ { 0x00000177, 0x0181 }, /* R375 - FLL1 Loop Filter Test 1 */ + { 0x00000178, 0x0000 }, /* R376 - FLL1 NCO Test 0 */ { 0x00000181, 0x0000 }, /* R385 - FLL1 Synchroniser 1 */ { 0x00000182, 0x0000 }, /* R386 - FLL1 Synchroniser 2 */ { 0x00000183, 0x0000 }, /* R387 - FLL1 Synchroniser 3 */ @@ -302,6 +305,7 @@ static const struct reg_default wm5102_reg_default[] = { { 0x00000195, 0x0004 }, /* R405 - FLL2 Control 5 */ { 0x00000196, 0x0000 }, /* R406 - FLL2 Control 6 */ { 0x00000197, 0x0000 }, /* R407 - FLL2 Loop Filter Test 1 */ + { 0x00000198, 0x0000 }, /* R408 - FLL2 NCO Test 0 */ { 0x000001A1, 0x0000 }, /* R417 - FLL2 Synchroniser 1 */ { 0x000001A2, 0x0000 }, /* R418 - FLL2 Synchroniser 2 */ { 0x000001A3, 0x0000 }, /* R419 - FLL2 Synchroniser 3 */ @@ -317,8 +321,12 @@ static const struct reg_default wm5102_reg_default[] = { { 0x00000218, 0x01A6 }, /* R536 - Mic Bias Ctrl 1 */ { 0x00000219, 0x01A6 }, /* R537 - Mic Bias Ctrl 2 */ { 0x0000021A, 0x01A6 }, /* R538 - Mic Bias Ctrl 3 */ + { 0x00000225, 0x0400 }, /* R549 - HP Ctrl 1L */ + { 0x00000226, 0x0400 }, /* R550 - HP Ctrl 1R */ { 0x00000293, 0x0000 }, /* R659 - Accessory Detect Mode 1 */ { 0x0000029B, 0x0020 }, /* R667 - Headphone Detect 1 */ + { 0x0000029C, 0x0000 }, /* R668 - Headphone Detect 2 */ + { 0x0000029F, 0x0000 }, /* R671 - Headphone Detect Test */ { 0x000002A2, 0x0000 }, /* R674 - Micd clamp control */ { 0x000002A3, 0x1102 }, /* R675 - Mic Detect 1 */ { 0x000002A4, 0x009F }, /* R676 - Mic Detect 2 */ @@ -350,53 +358,44 @@ static const struct reg_default wm5102_reg_default[] = { { 0x00000400, 0x0000 }, /* R1024 - Output Enables 1 */ { 0x00000408, 0x0000 }, /* R1032 - Output Rate 1 */ { 0x00000409, 0x0022 }, /* R1033 - Output Volume Ramp */ - { 0x00000410, 0x0080 }, /* R1040 - Output Path Config 1L */ + { 0x00000410, 0x4080 }, /* R1040 - Output Path Config 1L */ { 0x00000411, 0x0180 }, /* R1041 - DAC Digital Volume 1L */ - { 0x00000412, 0x0080 }, /* R1042 - DAC Volume Limit 1L */ + { 0x00000412, 0x0081 }, /* R1042 - DAC Volume Limit 1L */ { 0x00000413, 0x0001 }, /* R1043 - Noise Gate Select 1L */ { 0x00000414, 0x0080 }, /* R1044 - Output Path Config 1R */ { 0x00000415, 0x0180 }, /* R1045 - DAC Digital Volume 1R */ - { 0x00000416, 0x0080 }, /* R1046 - DAC Volume Limit 1R */ + { 0x00000416, 0x0081 }, /* R1046 - DAC Volume Limit 1R */ { 0x00000417, 0x0002 }, /* R1047 - Noise Gate Select 1R */ - { 0x00000418, 0x0080 }, /* R1048 - Output Path Config 2L */ + { 0x00000418, 0x4080 }, /* R1048 - Output Path Config 2L */ { 0x00000419, 0x0180 }, /* R1049 - DAC Digital Volume 2L */ - { 0x0000041A, 0x0080 }, /* R1050 - DAC Volume Limit 2L */ + { 0x0000041A, 0x0081 }, /* R1050 - DAC Volume Limit 2L */ { 0x0000041B, 0x0004 }, /* R1051 - Noise Gate Select 2L */ { 0x0000041C, 0x0080 }, /* R1052 - Output Path Config 2R */ { 0x0000041D, 0x0180 }, /* R1053 - DAC Digital Volume 2R */ - { 0x0000041E, 0x0080 }, /* R1054 - DAC Volume Limit 2R */ + { 0x0000041E, 0x0081 }, /* R1054 - DAC Volume Limit 2R */ { 0x0000041F, 0x0008 }, /* R1055 - Noise Gate Select 2R */ - { 0x00000420, 0x0080 }, /* R1056 - Output Path Config 3L */ + { 0x00000420, 0x4080 }, /* R1056 - Output Path Config 3L */ { 0x00000421, 0x0180 }, /* R1057 - DAC Digital Volume 3L */ - { 0x00000422, 0x0080 }, /* R1058 - DAC Volume Limit 3L */ + { 0x00000422, 0x0081 }, /* R1058 - DAC Volume Limit 3L */ { 0x00000423, 0x0010 }, /* R1059 - Noise Gate Select 3L */ - { 0x00000424, 0x0080 }, /* R1060 - Output Path Config 3R */ - { 0x00000425, 0x0180 }, /* R1061 - DAC Digital Volume 3R */ - { 0x00000426, 0x0080 }, /* R1062 - DAC Volume Limit 3R */ - { 0x00000428, 0x0000 }, /* R1064 - Output Path Config 4L */ + { 0x00000428, 0xC000 }, /* R1064 - Output Path Config 4L */ { 0x00000429, 0x0180 }, /* R1065 - DAC Digital Volume 4L */ - { 0x0000042A, 0x0080 }, /* R1066 - Out Volume 4L */ + { 0x0000042A, 0x0081 }, /* R1066 - Out Volume 4L */ { 0x0000042B, 0x0040 }, /* R1067 - Noise Gate Select 4L */ - { 0x0000042C, 0x0000 }, /* R1068 - Output Path Config 4R */ { 0x0000042D, 0x0180 }, /* R1069 - DAC Digital Volume 4R */ - { 0x0000042E, 0x0080 }, /* R1070 - Out Volume 4R */ + { 0x0000042E, 0x0081 }, /* R1070 - Out Volume 4R */ { 0x0000042F, 0x0080 }, /* R1071 - Noise Gate Select 4R */ { 0x00000430, 0x0000 }, /* R1072 - Output Path Config 5L */ { 0x00000431, 0x0180 }, /* R1073 - DAC Digital Volume 5L */ - { 0x00000432, 0x0080 }, /* R1074 - DAC Volume Limit 5L */ + { 0x00000432, 0x0081 }, /* R1074 - DAC Volume Limit 5L */ { 0x00000433, 0x0100 }, /* R1075 - Noise Gate Select 5L */ - { 0x00000434, 0x0000 }, /* R1076 - Output Path Config 5R */ { 0x00000435, 0x0180 }, /* R1077 - DAC Digital Volume 5R */ - { 0x00000436, 0x0080 }, /* R1078 - DAC Volume Limit 5R */ - { 0x00000437, 0x0200 }, /* R1079 - Noise Gate Select 5R */ + { 0x00000436, 0x0081 }, /* R1078 - DAC Volume Limit 5R */ + { 0x00000437, 0x0200 }, /* R1079 - Noise Gate Select 5R */ { 0x00000450, 0x0000 }, /* R1104 - DAC AEC Control 1 */ { 0x00000458, 0x0001 }, /* R1112 - Noise Gate Control */ { 0x00000490, 0x0069 }, /* R1168 - PDM SPK1 CTRL 1 */ { 0x00000491, 0x0000 }, /* R1169 - PDM SPK1 CTRL 2 */ - { 0x000004DC, 0x0000 }, /* R1244 - DAC comp 1 */ - { 0x000004DD, 0x0000 }, /* R1245 - DAC comp 2 */ - { 0x000004DE, 0x0000 }, /* R1246 - DAC comp 3 */ - { 0x000004DF, 0x0000 }, /* R1247 - DAC comp 4 */ { 0x00000500, 0x000C }, /* R1280 - AIF1 BCLK Ctrl */ { 0x00000501, 0x0008 }, /* R1281 - AIF1 Tx Pin Ctrl */ { 0x00000502, 0x0000 }, /* R1282 - AIF1 Rx Pin Ctrl */ @@ -424,7 +423,6 @@ static const struct reg_default wm5102_reg_default[] = { { 0x00000518, 0x0007 }, /* R1304 - AIF1 Frame Ctrl 18 */ { 0x00000519, 0x0000 }, /* R1305 - AIF1 Tx Enables */ { 0x0000051A, 0x0000 }, /* R1306 - AIF1 Rx Enables */ - { 0x0000051B, 0x0000 }, /* R1307 - AIF1 Force Write */ { 0x00000540, 0x000C }, /* R1344 - AIF2 BCLK Ctrl */ { 0x00000541, 0x0008 }, /* R1345 - AIF2 Tx Pin Ctrl */ { 0x00000542, 0x0000 }, /* R1346 - AIF2 Rx Pin Ctrl */ @@ -440,7 +438,6 @@ static const struct reg_default wm5102_reg_default[] = { { 0x00000552, 0x0001 }, /* R1362 - AIF2 Frame Ctrl 12 */ { 0x00000559, 0x0000 }, /* R1369 - AIF2 Tx Enables */ { 0x0000055A, 0x0000 }, /* R1370 - AIF2 Rx Enables */ - { 0x0000055B, 0x0000 }, /* R1371 - AIF2 Force Write */ { 0x00000580, 0x000C }, /* R1408 - AIF3 BCLK Ctrl */ { 0x00000581, 0x0008 }, /* R1409 - AIF3 Tx Pin Ctrl */ { 0x00000582, 0x0000 }, /* R1410 - AIF3 Rx Pin Ctrl */ @@ -456,7 +453,6 @@ static const struct reg_default wm5102_reg_default[] = { { 0x00000592, 0x0001 }, /* R1426 - AIF3 Frame Ctrl 12 */ { 0x00000599, 0x0000 }, /* R1433 - AIF3 Tx Enables */ { 0x0000059A, 0x0000 }, /* R1434 - AIF3 Rx Enables */ - { 0x0000059B, 0x0000 }, /* R1435 - AIF3 Force Write */ { 0x000005E3, 0x0004 }, /* R1507 - SLIMbus Framer Ref Gear */ { 0x000005E5, 0x0000 }, /* R1509 - SLIMbus Rates 1 */ { 0x000005E6, 0x0000 }, /* R1510 - SLIMbus Rates 2 */ @@ -780,22 +776,6 @@ static const struct reg_default wm5102_reg_default[] = { { 0x000008CD, 0x0080 }, /* R2253 - DRC1RMIX Input 3 Volume */ { 0x000008CE, 0x0000 }, /* R2254 - DRC1RMIX Input 4 Source */ { 0x000008CF, 0x0080 }, /* R2255 - DRC1RMIX Input 4 Volume */ - { 0x000008D0, 0x0000 }, /* R2256 - DRC2LMIX Input 1 Source */ - { 0x000008D1, 0x0080 }, /* R2257 - DRC2LMIX Input 1 Volume */ - { 0x000008D2, 0x0000 }, /* R2258 - DRC2LMIX Input 2 Source */ - { 0x000008D3, 0x0080 }, /* R2259 - DRC2LMIX Input 2 Volume */ - { 0x000008D4, 0x0000 }, /* R2260 - DRC2LMIX Input 3 Source */ - { 0x000008D5, 0x0080 }, /* R2261 - DRC2LMIX Input 3 Volume */ - { 0x000008D6, 0x0000 }, /* R2262 - DRC2LMIX Input 4 Source */ - { 0x000008D7, 0x0080 }, /* R2263 - DRC2LMIX Input 4 Volume */ - { 0x000008D8, 0x0000 }, /* R2264 - DRC2RMIX Input 1 Source */ - { 0x000008D9, 0x0080 }, /* R2265 - DRC2RMIX Input 1 Volume */ - { 0x000008DA, 0x0000 }, /* R2266 - DRC2RMIX Input 2 Source */ - { 0x000008DB, 0x0080 }, /* R2267 - DRC2RMIX Input 2 Volume */ - { 0x000008DC, 0x0000 }, /* R2268 - DRC2RMIX Input 3 Source */ - { 0x000008DD, 0x0080 }, /* R2269 - DRC2RMIX Input 3 Volume */ - { 0x000008DE, 0x0000 }, /* R2270 - DRC2RMIX Input 4 Source */ - { 0x000008DF, 0x0080 }, /* R2271 - DRC2RMIX Input 4 Volume */ { 0x00000900, 0x0000 }, /* R2304 - HPLP1MIX Input 1 Source */ { 0x00000901, 0x0080 }, /* R2305 - HPLP1MIX Input 1 Volume */ { 0x00000902, 0x0000 }, /* R2306 - HPLP1MIX Input 2 Source */ @@ -887,7 +867,7 @@ static const struct reg_default wm5102_reg_default[] = { { 0x00000D1B, 0xFFFF }, /* R3355 - IRQ2 Status 4 Mask */ { 0x00000D1C, 0xFFFF }, /* R3356 - IRQ2 Status 5 Mask */ { 0x00000D1F, 0x0000 }, /* R3359 - IRQ2 Control */ - { 0x00000D41, 0x0000 }, /* R3393 - ADSP2 IRQ0 */ + { 0x00000D50, 0x0000 }, /* R3408 - AOD wkup and trig */ { 0x00000D53, 0xFFFF }, /* R3411 - AOD IRQ Mask IRQ1 */ { 0x00000D54, 0xFFFF }, /* R3412 - AOD IRQ Mask IRQ2 */ { 0x00000D56, 0x0000 }, /* R3414 - Jack detect debounce */ @@ -982,11 +962,6 @@ static const struct reg_default wm5102_reg_default[] = { { 0x00000E82, 0x0018 }, /* R3714 - DRC1 ctrl3 */ { 0x00000E83, 0x0000 }, /* R3715 - DRC1 ctrl4 */ { 0x00000E84, 0x0000 }, /* R3716 - DRC1 ctrl5 */ - { 0x00000E89, 0x0018 }, /* R3721 - DRC2 ctrl1 */ - { 0x00000E8A, 0x0933 }, /* R3722 - DRC2 ctrl2 */ - { 0x00000E8B, 0x0018 }, /* R3723 - DRC2 ctrl3 */ - { 0x00000E8C, 0x0000 }, /* R3724 - DRC2 ctrl4 */ - { 0x00000E8D, 0x0000 }, /* R3725 - DRC2 ctrl5 */ { 0x00000EC0, 0x0000 }, /* R3776 - HPLPF1_1 */ { 0x00000EC1, 0x0000 }, /* R3777 - HPLPF1_2 */ { 0x00000EC4, 0x0000 }, /* R3780 - HPLPF2_1 */ @@ -997,16 +972,12 @@ static const struct reg_default wm5102_reg_default[] = { { 0x00000ECD, 0x0000 }, /* R3789 - HPLPF4_2 */ { 0x00000EE0, 0x0000 }, /* R3808 - ASRC_ENABLE */ { 0x00000EE2, 0x0000 }, /* R3810 - ASRC_RATE1 */ - { 0x00000EE3, 0x4000 }, /* R3811 - ASRC_RATE2 */ { 0x00000EF0, 0x0000 }, /* R3824 - ISRC 1 CTRL 1 */ { 0x00000EF1, 0x0000 }, /* R3825 - ISRC 1 CTRL 2 */ { 0x00000EF2, 0x0000 }, /* R3826 - ISRC 1 CTRL 3 */ { 0x00000EF3, 0x0000 }, /* R3827 - ISRC 2 CTRL 1 */ { 0x00000EF4, 0x0000 }, /* R3828 - ISRC 2 CTRL 2 */ { 0x00000EF5, 0x0000 }, /* R3829 - ISRC 2 CTRL 3 */ - { 0x00000EF6, 0x0000 }, /* R3830 - ISRC 3 CTRL 1 */ - { 0x00000EF7, 0x0000 }, /* R3831 - ISRC 3 CTRL 2 */ - { 0x00000EF8, 0x0000 }, /* R3832 - ISRC 3 CTRL 3 */ { 0x00001100, 0x0010 }, /* R4352 - DSP1 Control 1 */ { 0x00001101, 0x0000 }, /* R4353 - DSP1 Clocking 1 */ }; @@ -1833,17 +1804,24 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg) case ARIZONA_DSP1_STATUS_1: case ARIZONA_DSP1_STATUS_2: case ARIZONA_DSP1_STATUS_3: + case ARIZONA_DSP1_SCRATCH_0: + case ARIZONA_DSP1_SCRATCH_1: + case ARIZONA_DSP1_SCRATCH_2: + case ARIZONA_DSP1_SCRATCH_3: return true; default: - return false; + if ((reg >= 0x100000 && reg < 0x106000) || + (reg >= 0x180000 && reg < 0x180800) || + (reg >= 0x190000 && reg < 0x194800) || + (reg >= 0x1a8000 && reg < 0x1a9800)) + return true; + else + return false; } } static bool wm5102_volatile_register(struct device *dev, unsigned int reg) { - if (reg > 0xffff) - return true; - switch (reg) { case ARIZONA_SOFTWARE_RESET: case ARIZONA_DEVICE_REVISION: @@ -1884,12 +1862,22 @@ static bool wm5102_volatile_register(struct device *dev, unsigned int reg) case ARIZONA_DSP1_STATUS_1: case ARIZONA_DSP1_STATUS_2: case ARIZONA_DSP1_STATUS_3: + case ARIZONA_DSP1_SCRATCH_0: + case ARIZONA_DSP1_SCRATCH_1: + case ARIZONA_DSP1_SCRATCH_2: + case ARIZONA_DSP1_SCRATCH_3: case ARIZONA_HEADPHONE_DETECT_2: case ARIZONA_HP_DACVAL: case ARIZONA_MIC_DETECT_3: return true; default: - return false; + if ((reg >= 0x100000 && reg < 0x106000) || + (reg >= 0x180000 && reg < 0x180800) || + (reg >= 0x190000 && reg < 0x194800) || + (reg >= 0x1a8000 && reg < 0x1a9800)) + return true; + else + return false; } } diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c index 57c488d42d3e9b21e1ddd1dc68db4069e704aa44..803e93fae56aacb49c4960b8f0b156e8a85b7a6c 100644 --- a/drivers/mfd/wm8994-core.c +++ b/drivers/mfd/wm8994-core.c @@ -467,7 +467,7 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq) goto err; } - ret = regulator_bulk_get(wm8994->dev, wm8994->num_supplies, + ret = devm_regulator_bulk_get(wm8994->dev, wm8994->num_supplies, wm8994->supplies); if (ret != 0) { dev_err(wm8994->dev, "Failed to get supplies: %d\n", ret); @@ -478,7 +478,7 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq) wm8994->supplies); if (ret != 0) { dev_err(wm8994->dev, "Failed to enable supplies: %d\n", ret); - goto err_get; + goto err; } ret = wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET); @@ -658,8 +658,6 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq) err_enable: regulator_bulk_disable(wm8994->num_supplies, wm8994->supplies); -err_get: - regulator_bulk_free(wm8994->num_supplies, wm8994->supplies); err: mfd_remove_devices(wm8994->dev); return ret; @@ -672,7 +670,6 @@ static void wm8994_device_exit(struct wm8994 *wm8994) wm8994_irq_exit(wm8994); regulator_bulk_disable(wm8994->num_supplies, wm8994->supplies); - regulator_bulk_free(wm8994->num_supplies, wm8994->supplies); } static const struct of_device_id wm8994_of_match[] = { diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c index f74b5adca64232dd4a8ab7d4a397281b8f02c7a0..468c92303167acdeb37b77e1010b79a19d51c096 100644 --- a/drivers/mmc/host/rtsx_pci_sdmmc.c +++ b/drivers/mmc/host/rtsx_pci_sdmmc.c @@ -678,12 +678,19 @@ static void sdmmc_request(struct mmc_host *mmc, struct mmc_request *mrq) struct mmc_command *cmd = mrq->cmd; struct mmc_data *data = mrq->data; unsigned int data_size = 0; + int err; if (host->eject) { cmd->error = -ENOMEDIUM; goto finish; } + err = rtsx_pci_card_exclusive_check(host->pcr, RTSX_SD_CARD); + if (err) { + cmd->error = err; + goto finish; + } + mutex_lock(&pcr->pcr_mutex); rtsx_pci_start_run(pcr); @@ -901,6 +908,9 @@ static void sdmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) if (host->eject) return; + if (rtsx_pci_card_exclusive_check(host->pcr, RTSX_SD_CARD)) + return; + mutex_lock(&pcr->pcr_mutex); rtsx_pci_start_run(pcr); @@ -1073,6 +1083,10 @@ static int sdmmc_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios) if (host->eject) return -ENOMEDIUM; + err = rtsx_pci_card_exclusive_check(host->pcr, RTSX_SD_CARD); + if (err) + return err; + mutex_lock(&pcr->pcr_mutex); rtsx_pci_start_run(pcr); @@ -1122,6 +1136,10 @@ static int sdmmc_execute_tuning(struct mmc_host *mmc, u32 opcode) if (host->eject) return -ENOMEDIUM; + err = rtsx_pci_card_exclusive_check(host->pcr, RTSX_SD_CARD); + if (err) + return err; + mutex_lock(&pcr->pcr_mutex); rtsx_pci_start_run(pcr); diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index e6ab071fb6fddece886b00be334fe6810f17993d..79fbe3832dfc6f3bfd5e140143b0b51bb40cc36c 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -305,6 +305,16 @@ config RTC_DRV_X1205 This driver can also be built as a module. If so, the module will be called rtc-x1205. +config RTC_DRV_PALMAS + tristate "TI Palmas RTC driver" + depends on MFD_PALMAS + help + If you say yes here you get support for the RTC of TI PALMA series PMIC + chips. + + This driver can also be built as a module. If so, the module + will be called rtc-palma. + config RTC_DRV_PCF8523 tristate "NXP PCF8523" help diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index e8f2e2fee06f59ac5298b68529e722bbc43af8cc..c33f86f1a69b313f84f7c0e5ceb492474a59f892 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -81,6 +81,7 @@ obj-$(CONFIG_RTC_DRV_MPC5121) += rtc-mpc5121.o obj-$(CONFIG_RTC_DRV_MV) += rtc-mv.o obj-$(CONFIG_RTC_DRV_NUC900) += rtc-nuc900.o obj-$(CONFIG_RTC_DRV_OMAP) += rtc-omap.o +obj-$(CONFIG_RTC_DRV_PALMAS) += rtc-palmas.o obj-$(CONFIG_RTC_DRV_PCAP) += rtc-pcap.o obj-$(CONFIG_RTC_DRV_PCF8523) += rtc-pcf8523.o obj-$(CONFIG_RTC_DRV_PCF8563) += rtc-pcf8563.o diff --git a/drivers/rtc/rtc-palmas.c b/drivers/rtc/rtc-palmas.c new file mode 100644 index 0000000000000000000000000000000000000000..59c42986254e09c155130e02641d234738b2481f --- /dev/null +++ b/drivers/rtc/rtc-palmas.c @@ -0,0 +1,339 @@ +/* + * rtc-palmas.c -- Palmas Real Time Clock driver. + + * RTC driver for TI Palma series devices like TPS65913, + * TPS65914 power management IC. + * + * Copyright (c) 2012, NVIDIA Corporation. + * + * Author: Laxman Dewangan + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, + * whether express or implied; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307, USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct palmas_rtc { + struct rtc_device *rtc; + struct device *dev; + unsigned int irq; +}; + +/* Total number of RTC registers needed to set time*/ +#define PALMAS_NUM_TIME_REGS (PALMAS_YEARS_REG - PALMAS_SECONDS_REG + 1) + +static int palmas_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + unsigned char rtc_data[PALMAS_NUM_TIME_REGS]; + struct palmas *palmas = dev_get_drvdata(dev->parent); + int ret; + + /* Copy RTC counting registers to static registers or latches */ + ret = palmas_update_bits(palmas, PALMAS_RTC_BASE, PALMAS_RTC_CTRL_REG, + PALMAS_RTC_CTRL_REG_GET_TIME, PALMAS_RTC_CTRL_REG_GET_TIME); + if (ret < 0) { + dev_err(dev, "RTC CTRL reg update failed, err: %d\n", ret); + return ret; + } + + ret = palmas_bulk_read(palmas, PALMAS_RTC_BASE, PALMAS_SECONDS_REG, + rtc_data, PALMAS_NUM_TIME_REGS); + if (ret < 0) { + dev_err(dev, "RTC_SECONDS reg read failed, err = %d\n", ret); + return ret; + } + + tm->tm_sec = bcd2bin(rtc_data[0]); + tm->tm_min = bcd2bin(rtc_data[1]); + tm->tm_hour = bcd2bin(rtc_data[2]); + tm->tm_mday = bcd2bin(rtc_data[3]); + tm->tm_mon = bcd2bin(rtc_data[4]) - 1; + tm->tm_year = bcd2bin(rtc_data[5]) + 100; + + return ret; +} + +static int palmas_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + unsigned char rtc_data[PALMAS_NUM_TIME_REGS]; + struct palmas *palmas = dev_get_drvdata(dev->parent); + int ret; + + rtc_data[0] = bin2bcd(tm->tm_sec); + rtc_data[1] = bin2bcd(tm->tm_min); + rtc_data[2] = bin2bcd(tm->tm_hour); + rtc_data[3] = bin2bcd(tm->tm_mday); + rtc_data[4] = bin2bcd(tm->tm_mon + 1); + rtc_data[5] = bin2bcd(tm->tm_year - 100); + + /* Stop RTC while updating the RTC time registers */ + ret = palmas_update_bits(palmas, PALMAS_RTC_BASE, PALMAS_RTC_CTRL_REG, + PALMAS_RTC_CTRL_REG_STOP_RTC, 0); + if (ret < 0) { + dev_err(dev, "RTC stop failed, err = %d\n", ret); + return ret; + } + + ret = palmas_bulk_write(palmas, PALMAS_RTC_BASE, PALMAS_SECONDS_REG, + rtc_data, PALMAS_NUM_TIME_REGS); + if (ret < 0) { + dev_err(dev, "RTC_SECONDS reg write failed, err = %d\n", ret); + return ret; + } + + /* Start back RTC */ + ret = palmas_update_bits(palmas, PALMAS_RTC_BASE, PALMAS_RTC_CTRL_REG, + PALMAS_RTC_CTRL_REG_STOP_RTC, PALMAS_RTC_CTRL_REG_STOP_RTC); + if (ret < 0) + dev_err(dev, "RTC start failed, err = %d\n", ret); + return ret; +} + +static int palmas_rtc_alarm_irq_enable(struct device *dev, unsigned enabled) +{ + struct palmas *palmas = dev_get_drvdata(dev->parent); + u8 val; + + val = enabled ? PALMAS_RTC_INTERRUPTS_REG_IT_ALARM : 0; + return palmas_write(palmas, PALMAS_RTC_BASE, + PALMAS_RTC_INTERRUPTS_REG, val); +} + +static int palmas_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm) +{ + unsigned char alarm_data[PALMAS_NUM_TIME_REGS]; + u32 int_val; + struct palmas *palmas = dev_get_drvdata(dev->parent); + int ret; + + ret = palmas_bulk_read(palmas, PALMAS_RTC_BASE, + PALMAS_ALARM_SECONDS_REG, + alarm_data, PALMAS_NUM_TIME_REGS); + if (ret < 0) { + dev_err(dev, "RTC_ALARM_SECONDS read failed, err = %d\n", ret); + return ret; + } + + alm->time.tm_sec = bcd2bin(alarm_data[0]); + alm->time.tm_min = bcd2bin(alarm_data[1]); + alm->time.tm_hour = bcd2bin(alarm_data[2]); + alm->time.tm_mday = bcd2bin(alarm_data[3]); + alm->time.tm_mon = bcd2bin(alarm_data[4]) - 1; + alm->time.tm_year = bcd2bin(alarm_data[5]) + 100; + + ret = palmas_read(palmas, PALMAS_RTC_BASE, PALMAS_RTC_INTERRUPTS_REG, + &int_val); + if (ret < 0) { + dev_err(dev, "RTC_INTERRUPTS reg read failed, err = %d\n", ret); + return ret; + } + + if (int_val & PALMAS_RTC_INTERRUPTS_REG_IT_ALARM) + alm->enabled = 1; + return ret; +} + +static int palmas_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) +{ + unsigned char alarm_data[PALMAS_NUM_TIME_REGS]; + struct palmas *palmas = dev_get_drvdata(dev->parent); + int ret; + + ret = palmas_rtc_alarm_irq_enable(dev, 0); + if (ret < 0) { + dev_err(dev, "Disable RTC alarm failed\n"); + return ret; + } + + alarm_data[0] = bin2bcd(alm->time.tm_sec); + alarm_data[1] = bin2bcd(alm->time.tm_min); + alarm_data[2] = bin2bcd(alm->time.tm_hour); + alarm_data[3] = bin2bcd(alm->time.tm_mday); + alarm_data[4] = bin2bcd(alm->time.tm_mon + 1); + alarm_data[5] = bin2bcd(alm->time.tm_year - 100); + + ret = palmas_bulk_write(palmas, PALMAS_RTC_BASE, + PALMAS_ALARM_SECONDS_REG, alarm_data, PALMAS_NUM_TIME_REGS); + if (ret < 0) { + dev_err(dev, "ALARM_SECONDS_REG write failed, err = %d\n", ret); + return ret; + } + + if (alm->enabled) + ret = palmas_rtc_alarm_irq_enable(dev, 1); + return ret; +} + +static int palmas_clear_interrupts(struct device *dev) +{ + struct palmas *palmas = dev_get_drvdata(dev->parent); + unsigned int rtc_reg; + int ret; + + ret = palmas_read(palmas, PALMAS_RTC_BASE, PALMAS_RTC_STATUS_REG, + &rtc_reg); + if (ret < 0) { + dev_err(dev, "RTC_STATUS read failed, err = %d\n", ret); + return ret; + } + + ret = palmas_write(palmas, PALMAS_RTC_BASE, PALMAS_RTC_STATUS_REG, + rtc_reg); + if (ret < 0) { + dev_err(dev, "RTC_STATUS write failed, err = %d\n", ret); + return ret; + } + return 0; +} + +static irqreturn_t palmas_rtc_interrupt(int irq, void *context) +{ + struct palmas_rtc *palmas_rtc = context; + struct device *dev = palmas_rtc->dev; + int ret; + + ret = palmas_clear_interrupts(dev); + if (ret < 0) { + dev_err(dev, "RTC interrupt clear failed, err = %d\n", ret); + return IRQ_NONE; + } + + rtc_update_irq(palmas_rtc->rtc, 1, RTC_IRQF | RTC_AF); + return IRQ_HANDLED; +} + +static struct rtc_class_ops palmas_rtc_ops = { + .read_time = palmas_rtc_read_time, + .set_time = palmas_rtc_set_time, + .read_alarm = palmas_rtc_read_alarm, + .set_alarm = palmas_rtc_set_alarm, + .alarm_irq_enable = palmas_rtc_alarm_irq_enable, +}; + +static int palmas_rtc_probe(struct platform_device *pdev) +{ + struct palmas *palmas = dev_get_drvdata(pdev->dev.parent); + struct palmas_rtc *palmas_rtc = NULL; + int ret; + + palmas_rtc = devm_kzalloc(&pdev->dev, sizeof(struct palmas_rtc), + GFP_KERNEL); + if (!palmas_rtc) + return -ENOMEM; + + /* Clear pending interrupts */ + ret = palmas_clear_interrupts(&pdev->dev); + if (ret < 0) { + dev_err(&pdev->dev, "clear RTC int failed, err = %d\n", ret); + return ret; + } + + palmas_rtc->dev = &pdev->dev; + platform_set_drvdata(pdev, palmas_rtc); + + /* Start RTC */ + ret = palmas_update_bits(palmas, PALMAS_RTC_BASE, PALMAS_RTC_CTRL_REG, + PALMAS_RTC_CTRL_REG_STOP_RTC, + PALMAS_RTC_CTRL_REG_STOP_RTC); + if (ret < 0) { + dev_err(&pdev->dev, "RTC_CTRL write failed, err = %d\n", ret); + return ret; + } + + palmas_rtc->irq = platform_get_irq(pdev, 0); + + palmas_rtc->rtc = rtc_device_register(pdev->name, &pdev->dev, + &palmas_rtc_ops, THIS_MODULE); + if (IS_ERR(palmas_rtc->rtc)) { + ret = PTR_ERR(palmas_rtc->rtc); + dev_err(&pdev->dev, "RTC register failed, err = %d\n", ret); + return ret; + } + + ret = request_threaded_irq(palmas_rtc->irq, NULL, + palmas_rtc_interrupt, + IRQF_TRIGGER_LOW | IRQF_ONESHOT | + IRQF_EARLY_RESUME, + dev_name(&pdev->dev), palmas_rtc); + if (ret < 0) { + dev_err(&pdev->dev, "IRQ request failed, err = %d\n", ret); + rtc_device_unregister(palmas_rtc->rtc); + return ret; + } + + device_set_wakeup_capable(&pdev->dev, 1); + return 0; +} + +static int palmas_rtc_remove(struct platform_device *pdev) +{ + struct palmas_rtc *palmas_rtc = platform_get_drvdata(pdev); + + palmas_rtc_alarm_irq_enable(&pdev->dev, 0); + free_irq(palmas_rtc->irq, palmas_rtc); + rtc_device_unregister(palmas_rtc->rtc); + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int palmas_rtc_suspend(struct device *dev) +{ + struct palmas_rtc *palmas_rtc = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + enable_irq_wake(palmas_rtc->irq); + return 0; +} + +static int palmas_rtc_resume(struct device *dev) +{ + struct palmas_rtc *palmas_rtc = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + disable_irq_wake(palmas_rtc->irq); + return 0; +} +#endif + +static const struct dev_pm_ops palmas_rtc_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(palmas_rtc_suspend, palmas_rtc_resume) +}; + +static struct platform_driver palmas_rtc_driver = { + .probe = palmas_rtc_probe, + .remove = palmas_rtc_remove, + .driver = { + .owner = THIS_MODULE, + .name = "palmas-rtc", + .pm = &palmas_rtc_pm_ops, + }, +}; + +module_platform_driver(palmas_rtc_driver); + +MODULE_ALIAS("platform:palmas_rtc"); +MODULE_DESCRIPTION("TI PALMAS series RTC driver"); +MODULE_AUTHOR("Laxman Dewangan "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 99899e808c6afc83af6e428fa96e2e781983effd..0555ee42d7cb1882cf284a2f8019ce8a091be961 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -107,7 +107,7 @@ static int omap_ehci_init(struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); int rc; - struct ehci_hcd_omap_platform_data *pdata; + struct usbhs_omap_platform_data *pdata; pdata = hcd->self.controller->platform_data; @@ -151,7 +151,7 @@ static int omap_ehci_init(struct usb_hcd *hcd) } static void disable_put_regulator( - struct ehci_hcd_omap_platform_data *pdata) + struct usbhs_omap_platform_data *pdata) { int i; @@ -176,7 +176,7 @@ static void disable_put_regulator( static int ehci_hcd_omap_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct ehci_hcd_omap_platform_data *pdata = dev->platform_data; + struct usbhs_omap_platform_data *pdata = dev->platform_data; struct resource *res; struct usb_hcd *hcd; void __iomem *regs; diff --git a/drivers/video/backlight/max8925_bl.c b/drivers/video/backlight/max8925_bl.c index 2c9bce050aa954a03bd04ee09b5be4d45fe9a3a4..5ca11b066b7e51b31e346759fed356e98bfe0d12 100644 --- a/drivers/video/backlight/max8925_bl.c +++ b/drivers/video/backlight/max8925_bl.c @@ -101,6 +101,29 @@ static const struct backlight_ops max8925_backlight_ops = { .get_brightness = max8925_backlight_get_brightness, }; +#ifdef CONFIG_OF +static int max8925_backlight_dt_init(struct platform_device *pdev, + struct max8925_backlight_pdata *pdata) +{ + struct device_node *nproot = pdev->dev.parent->of_node, *np; + int dual_string; + + if (!nproot) + return -ENODEV; + np = of_find_node_by_name(nproot, "backlight"); + if (!np) { + dev_err(&pdev->dev, "failed to find backlight node\n"); + return -ENODEV; + } + + of_property_read_u32(np, "maxim,max8925-dual-string", &dual_string); + pdata->dual_string = dual_string; + return 0; +} +#else +#define max8925_backlight_dt_init(x, y) (-1) +#endif + static int max8925_backlight_probe(struct platform_device *pdev) { struct max8925_chip *chip = dev_get_drvdata(pdev->dev.parent); @@ -147,6 +170,13 @@ static int max8925_backlight_probe(struct platform_device *pdev) platform_set_drvdata(pdev, bl); value = 0; + if (pdev->dev.parent->of_node && !pdata) { + pdata = devm_kzalloc(&pdev->dev, + sizeof(struct max8925_backlight_pdata), + GFP_KERNEL); + max8925_backlight_dt_init(pdev, pdata); + } + if (pdata) { if (pdata->lxw_scl) value |= (1 << 7); @@ -158,7 +188,6 @@ static int max8925_backlight_probe(struct platform_device *pdev) ret = max8925_set_bits(chip->i2c, data->reg_mode_cntl, 0xfe, value); if (ret < 0) goto out_brt; - backlight_update_status(bl); return 0; out_brt: diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 7f809fd4a57f950c94c3d5d280fe471f60ebeaf4..26e1fdbddf690c88cd20dbf015955d6b13295a0a 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -364,6 +364,18 @@ config IMX2_WDT To compile this driver as a module, choose M here: the module will be called imx2_wdt. +config UX500_WATCHDOG + tristate "ST-Ericsson Ux500 watchdog" + depends on MFD_DB8500_PRCMU + select WATCHDOG_CORE + default y + help + Say Y here to include Watchdog timer support for the watchdog + existing in the prcmu of ST-Ericsson Ux500 series platforms. + + To compile this driver as a module, choose M here: the + module will be called ux500_wdt. + # AVR32 Architecture config AT32AP700X_WDT diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 97bbdb3a464844588fa97e526b89eb284f302145..bec86ee6e9e3a93f4d14494ec090d51b8dc1654c 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -52,6 +52,7 @@ obj-$(CONFIG_STMP3XXX_WATCHDOG) += stmp3xxx_wdt.o obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o +obj-$(CONFIG_UX500_WATCHDOG) += ux500_wdt.o # AVR32 Architecture obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o diff --git a/drivers/watchdog/ux500_wdt.c b/drivers/watchdog/ux500_wdt.c new file mode 100644 index 0000000000000000000000000000000000000000..a614d84121c317c8707447803eaaeb1802be7554 --- /dev/null +++ b/drivers/watchdog/ux500_wdt.c @@ -0,0 +1,171 @@ +/* + * Copyright (C) ST-Ericsson SA 2011-2013 + * + * License Terms: GNU General Public License v2 + * + * Author: Mathieu Poirier for ST-Ericsson + * Author: Jonas Aaberg for ST-Ericsson + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define WATCHDOG_TIMEOUT 600 /* 10 minutes */ + +#define WATCHDOG_MIN 0 +#define WATCHDOG_MAX28 268435 /* 28 bit resolution in ms == 268435.455 s */ +#define WATCHDOG_MAX32 4294967 /* 32 bit resolution in ms == 4294967.295 s */ + +static unsigned int timeout = WATCHDOG_TIMEOUT; +module_param(timeout, uint, 0); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) "."); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static int ux500_wdt_start(struct watchdog_device *wdd) +{ + return prcmu_enable_a9wdog(PRCMU_WDOG_ALL); +} + +static int ux500_wdt_stop(struct watchdog_device *wdd) +{ + return prcmu_disable_a9wdog(PRCMU_WDOG_ALL); +} + +static int ux500_wdt_keepalive(struct watchdog_device *wdd) +{ + return prcmu_kick_a9wdog(PRCMU_WDOG_ALL); +} + +static int ux500_wdt_set_timeout(struct watchdog_device *wdd, + unsigned int timeout) +{ + ux500_wdt_stop(wdd); + prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000); + ux500_wdt_start(wdd); + + return 0; +} + +static const struct watchdog_info ux500_wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, + .identity = "Ux500 WDT", + .firmware_version = 1, +}; + +static const struct watchdog_ops ux500_wdt_ops = { + .owner = THIS_MODULE, + .start = ux500_wdt_start, + .stop = ux500_wdt_stop, + .ping = ux500_wdt_keepalive, + .set_timeout = ux500_wdt_set_timeout, +}; + +static struct watchdog_device ux500_wdt = { + .info = &ux500_wdt_info, + .ops = &ux500_wdt_ops, + .min_timeout = WATCHDOG_MIN, + .max_timeout = WATCHDOG_MAX32, +}; + +static int ux500_wdt_probe(struct platform_device *pdev) +{ + int ret; + struct ux500_wdt_data *pdata = pdev->dev.platform_data; + + if (pdata) { + if (pdata->timeout > 0) + timeout = pdata->timeout; + if (pdata->has_28_bits_resolution) + ux500_wdt.max_timeout = WATCHDOG_MAX28; + } + + watchdog_set_nowayout(&ux500_wdt, nowayout); + + /* disable auto off on sleep */ + prcmu_config_a9wdog(PRCMU_WDOG_CPU1, false); + + /* set HW initial value */ + prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000); + + ret = watchdog_register_device(&ux500_wdt); + if (ret) + return ret; + + dev_info(&pdev->dev, "initialized\n"); + + return 0; +} + +static int ux500_wdt_remove(struct platform_device *dev) +{ + watchdog_unregister_device(&ux500_wdt); + + return 0; +} + +#ifdef CONFIG_PM +static int ux500_wdt_suspend(struct platform_device *pdev, + pm_message_t state) +{ + if (watchdog_active(&ux500_wdt)) { + ux500_wdt_stop(&ux500_wdt); + prcmu_config_a9wdog(PRCMU_WDOG_CPU1, true); + + prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000); + ux500_wdt_start(&ux500_wdt); + } + return 0; +} + +static int ux500_wdt_resume(struct platform_device *pdev) +{ + if (watchdog_active(&ux500_wdt)) { + ux500_wdt_stop(&ux500_wdt); + prcmu_config_a9wdog(PRCMU_WDOG_CPU1, false); + + prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000); + ux500_wdt_start(&ux500_wdt); + } + return 0; +} +#else +#define ux500_wdt_suspend NULL +#define ux500_wdt_resume NULL +#endif + +static struct platform_driver ux500_wdt_driver = { + .probe = ux500_wdt_probe, + .remove = ux500_wdt_remove, + .suspend = ux500_wdt_suspend, + .resume = ux500_wdt_resume, + .driver = { + .owner = THIS_MODULE, + .name = "ux500_wdt", + }, +}; + +module_platform_driver(ux500_wdt_driver); + +MODULE_AUTHOR("Jonas Aaberg "); +MODULE_DESCRIPTION("Ux500 Watchdog Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); +MODULE_ALIAS("platform:ux500_wdt"); diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h index 1ff54b114efcb1971742cfcb584bfd662468ce49..488debbef8959caf079606e0e3876e843d157955 100644 --- a/include/linux/i2c/twl.h +++ b/include/linux/i2c/twl.h @@ -39,51 +39,55 @@ * address each module uses within a given i2c slave. */ +/* Module IDs for similar functionalities found in twl4030/twl6030 */ +enum twl_module_ids { + TWL_MODULE_USB, + TWL_MODULE_PIH, + TWL_MODULE_MAIN_CHARGE, + TWL_MODULE_PM_MASTER, + TWL_MODULE_PM_RECEIVER, + + TWL_MODULE_RTC, + TWL_MODULE_PWM, + TWL_MODULE_LED, + TWL_MODULE_SECURED_REG, + + TWL_MODULE_LAST, +}; + +/* Modules only available in twl4030 series */ enum twl4030_module_ids { - TWL4030_MODULE_USB = 0, /* Slave 0 (i2c address 0x48) */ - TWL4030_MODULE_AUDIO_VOICE, /* Slave 1 (i2c address 0x49) */ + TWL4030_MODULE_AUDIO_VOICE = TWL_MODULE_LAST, TWL4030_MODULE_GPIO, TWL4030_MODULE_INTBR, - TWL4030_MODULE_PIH, - TWL4030_MODULE_TEST, - TWL4030_MODULE_KEYPAD, /* Slave 2 (i2c address 0x4a) */ + TWL4030_MODULE_KEYPAD, + TWL4030_MODULE_MADC, TWL4030_MODULE_INTERRUPTS, - TWL4030_MODULE_LED, - - TWL4030_MODULE_MAIN_CHARGE, TWL4030_MODULE_PRECHARGE, - TWL4030_MODULE_PWM0, - TWL4030_MODULE_PWM1, - TWL4030_MODULE_PWMA, + TWL4030_MODULE_BACKUP, + TWL4030_MODULE_INT, - TWL4030_MODULE_PWMB, TWL5031_MODULE_ACCESSORY, TWL5031_MODULE_INTERRUPTS, - TWL4030_MODULE_BACKUP, /* Slave 3 (i2c address 0x4b) */ - TWL4030_MODULE_INT, - TWL4030_MODULE_PM_MASTER, - TWL4030_MODULE_PM_RECEIVER, - TWL4030_MODULE_RTC, - TWL4030_MODULE_SECURED_REG, TWL4030_MODULE_LAST, }; -/* Similar functionalities implemented in TWL4030/6030 */ -#define TWL_MODULE_USB TWL4030_MODULE_USB -#define TWL_MODULE_PIH TWL4030_MODULE_PIH -#define TWL_MODULE_MAIN_CHARGE TWL4030_MODULE_MAIN_CHARGE -#define TWL_MODULE_PM_MASTER TWL4030_MODULE_PM_MASTER -#define TWL_MODULE_PM_RECEIVER TWL4030_MODULE_PM_RECEIVER -#define TWL_MODULE_RTC TWL4030_MODULE_RTC -#define TWL_MODULE_PWM TWL4030_MODULE_PWM0 -#define TWL_MODULE_LED TWL4030_MODULE_LED +/* Modules only available in twl6030 series */ +enum twl6030_module_ids { + TWL6030_MODULE_ID0 = TWL_MODULE_LAST, + TWL6030_MODULE_ID1, + TWL6030_MODULE_ID2, + TWL6030_MODULE_GPADC, + TWL6030_MODULE_GASGAUGE, + + TWL6030_MODULE_LAST, +}; -#define TWL6030_MODULE_ID0 13 -#define TWL6030_MODULE_ID1 14 -#define TWL6030_MODULE_ID2 15 +/* Until the clients has been converted to use TWL_MODULE_LED */ +#define TWL4030_MODULE_LED TWL_MODULE_LED #define GPIO_INTR_OFFSET 0 #define KEYPAD_INTR_OFFSET 1 @@ -170,21 +174,23 @@ static inline int twl_class_is_ ##class(void) \ TWL_CLASS_IS(4030, TWL4030_CLASS_ID) TWL_CLASS_IS(6030, TWL6030_CLASS_ID) -/* - * Read and write single 8-bit registers - */ -int twl_i2c_write_u8(u8 mod_no, u8 val, u8 reg); -int twl_i2c_read_u8(u8 mod_no, u8 *val, u8 reg); - /* * Read and write several 8-bit registers at once. - * - * IMPORTANT: For twl_i2c_write(), allocate num_bytes + 1 - * for the value, and populate your data starting at offset 1. */ int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); +/* + * Read and write single 8-bit registers + */ +static inline int twl_i2c_write_u8(u8 mod_no, u8 val, u8 reg) { + return twl_i2c_write(mod_no, &val, reg, 1); +} + +static inline int twl_i2c_read_u8(u8 mod_no, u8 *val, u8 reg) { + return twl_i2c_read(mod_no, val, reg, 1); +} + int twl_get_type(void); int twl_get_version(void); int twl_get_hfclk_rate(void); diff --git a/include/linux/mfd/88pm80x.h b/include/linux/mfd/88pm80x.h index 478672ed0c3d5d45793935a913f2f9a59a9de6a3..e94537befabd018a4d8128bd7134594e59b120f1 100644 --- a/include/linux/mfd/88pm80x.h +++ b/include/linux/mfd/88pm80x.h @@ -365,5 +365,5 @@ static inline int pm80x_dev_resume(struct device *dev) extern int pm80x_init(struct i2c_client *client, const struct i2c_device_id *id); -extern int pm80x_deinit(struct i2c_client *client); +extern int pm80x_deinit(void); #endif /* __LINUX_MFD_88PM80X_H */ diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h index 80e3b8683a84f1c51fb793e8439bc436cb36117f..9ead60bc66b73be3de722213d91e3eb8d51cbae2 100644 --- a/include/linux/mfd/abx500.h +++ b/include/linux/mfd/abx500.h @@ -311,6 +311,7 @@ int abx500_mask_and_set_register_interruptible(struct device *dev, u8 bank, int abx500_get_chip_id(struct device *dev); int abx500_event_registers_startup_state_get(struct device *dev, u8 *event); int abx500_startup_irq_enabled(struct device *dev, unsigned int irq); +void abx500_dump_all_banks(void); struct abx500_ops { int (*get_chip_id) (struct device *); @@ -321,6 +322,7 @@ struct abx500_ops { int (*mask_and_set_register) (struct device *, u8, u8, u8, u8); int (*event_registers_startup_state_get) (struct device *, u8 *); int (*startup_irq_enabled) (struct device *, unsigned int); + void (*dump_all_banks) (struct device *); }; int abx500_register_ops(struct device *core_dev, struct abx500_ops *ops); diff --git a/include/linux/mfd/abx500/ab8500-sysctrl.h b/include/linux/mfd/abx500/ab8500-sysctrl.h index 10eb50973c393dbd9a75ef8c6e214670e7c0785b..ebf12e793db982fd06e96682c9e1ad1b7f4a6c42 100644 --- a/include/linux/mfd/abx500/ab8500-sysctrl.h +++ b/include/linux/mfd/abx500/ab8500-sysctrl.h @@ -37,6 +37,11 @@ static inline int ab8500_sysctrl_clear(u16 reg, u8 bits) return ab8500_sysctrl_write(reg, bits, 0); } +/* Configuration data for SysClkReq1RfClkBuf - SysClkReq8RfClkBuf */ +struct ab8500_sysctrl_platform_data { + u8 initial_req_buf_config[8]; +}; + /* Registers */ #define AB8500_TURNONSTATUS 0x100 #define AB8500_RESETSTATUS 0x101 diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h index fc0534483c726daaefb0cd5e50116b142a17a4dc..9db0bda446a0794a9460178e248162727556e79b 100644 --- a/include/linux/mfd/abx500/ab8500.h +++ b/include/linux/mfd/abx500/ab8500.h @@ -368,10 +368,12 @@ struct regulator_reg_init; struct regulator_init_data; struct ab8500_gpio_platform_data; struct ab8500_codec_platform_data; +struct ab8500_sysctrl_platform_data; /** * struct ab8500_platform_data - AB8500 platform data * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used + * @pm_power_off: Should machine pm power off hook be registered or not * @init: board-specific initialization after detection of ab8500 * @num_regulator_reg_init: number of regulator init registers * @regulator_reg_init: regulator init registers @@ -380,6 +382,7 @@ struct ab8500_codec_platform_data; */ struct ab8500_platform_data { int irq_base; + bool pm_power_off; void (*init) (struct ab8500 *); int num_regulator_reg_init; struct ab8500_regulator_reg_init *regulator_reg_init; @@ -387,6 +390,7 @@ struct ab8500_platform_data { struct regulator_init_data *regulator; struct abx500_gpio_platform_data *gpio; struct ab8500_codec_platform_data *codec; + struct ab8500_sysctrl_platform_data *sysctrl; }; extern int ab8500_init(struct ab8500 *ab8500, @@ -508,4 +512,12 @@ static inline int is_ab9540_2p0_or_earlier(struct ab8500 *ab) return (is_ab9540(ab) && (ab->chip_id < AB8500_CUT2P0)); } +#ifdef CONFIG_AB8500_DEBUG +void ab8500_dump_all_banks(struct device *dev); +void ab8500_debug_register_interrupt(int line); +#else +static inline void ab8500_dump_all_banks(struct device *dev) {} +static inline void ab8500_debug_register_interrupt(int line) {} +#endif + #endif /* MFD_AB8500_H */ diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h index 96d64f2b8d781393b5566bf1bacf2a6a6b669e09..455c51d22d6b43e5dd4ccb932021dfcea36182a0 100644 --- a/include/linux/mfd/arizona/pdata.h +++ b/include/linux/mfd/arizona/pdata.h @@ -56,6 +56,8 @@ #define ARIZONA_DMIC_MICBIAS2 2 #define ARIZONA_DMIC_MICBIAS3 3 +#define ARIZONA_MAX_MICBIAS 3 + #define ARIZONA_INMODE_DIFF 0 #define ARIZONA_INMODE_SE 1 #define ARIZONA_INMODE_DMIC 2 @@ -71,6 +73,13 @@ struct regulator_init_data; +struct arizona_micbias { + int mV; /** Regulated voltage */ + unsigned int ext_cap:1; /** External capacitor fitted */ + unsigned int discharge:1; /** Actively discharge */ + unsigned int fast_start:1; /** Enable aggressive startup ramp rate */ +}; + struct arizona_micd_config { unsigned int src; unsigned int bias; @@ -136,6 +145,9 @@ struct arizona_pdata { /** Reference voltage for DMIC inputs */ int dmic_ref[ARIZONA_MAX_INPUT]; + /** MICBIAS configurations */ + struct arizona_micbias micbias[ARIZONA_MAX_MICBIAS]; + /** Mode of input structures */ int inmode[ARIZONA_MAX_INPUT]; diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h index 188d89abd9637c64e39234183e501e7c2bb22f99..3403551360696b3f9900a8a4b1e5bc59bd17a672 100644 --- a/include/linux/mfd/arizona/registers.h +++ b/include/linux/mfd/arizona/registers.h @@ -984,18 +984,34 @@ #define ARIZONA_DSP1_STATUS_1 0x1104 #define ARIZONA_DSP1_STATUS_2 0x1105 #define ARIZONA_DSP1_STATUS_3 0x1106 +#define ARIZONA_DSP1_SCRATCH_0 0x1140 +#define ARIZONA_DSP1_SCRATCH_1 0x1141 +#define ARIZONA_DSP1_SCRATCH_2 0x1142 +#define ARIZONA_DSP1_SCRATCH_3 0x1143 #define ARIZONA_DSP2_CONTROL_1 0x1200 #define ARIZONA_DSP2_CLOCKING_1 0x1201 #define ARIZONA_DSP2_STATUS_1 0x1204 #define ARIZONA_DSP2_STATUS_2 0x1205 +#define ARIZONA_DSP2_SCRATCH_0 0x1240 +#define ARIZONA_DSP2_SCRATCH_1 0x1241 +#define ARIZONA_DSP2_SCRATCH_2 0x1242 +#define ARIZONA_DSP2_SCRATCH_3 0x1243 #define ARIZONA_DSP3_CONTROL_1 0x1300 #define ARIZONA_DSP3_CLOCKING_1 0x1301 #define ARIZONA_DSP3_STATUS_1 0x1304 #define ARIZONA_DSP3_STATUS_2 0x1305 +#define ARIZONA_DSP3_SCRATCH_0 0x1340 +#define ARIZONA_DSP3_SCRATCH_1 0x1341 +#define ARIZONA_DSP3_SCRATCH_2 0x1342 +#define ARIZONA_DSP3_SCRATCH_3 0x1343 #define ARIZONA_DSP4_CONTROL_1 0x1400 #define ARIZONA_DSP4_CLOCKING_1 0x1401 #define ARIZONA_DSP4_STATUS_1 0x1404 #define ARIZONA_DSP4_STATUS_2 0x1405 +#define ARIZONA_DSP4_SCRATCH_0 0x1440 +#define ARIZONA_DSP4_SCRATCH_1 0x1441 +#define ARIZONA_DSP4_SCRATCH_2 0x1442 +#define ARIZONA_DSP4_SCRATCH_3 0x1443 /* * Field Definitions. diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h index f8bac7cfc25fea58be8a3a47d05fffc4da22f8e4..3abcca91eecdbe86dd3f98f8dc21f3989a88260e 100644 --- a/include/linux/mfd/dbx500-prcmu.h +++ b/include/linux/mfd/dbx500-prcmu.h @@ -150,6 +150,18 @@ enum prcmu_clock { PRCMU_DSI2ESCCLK, }; +/** + * enum prcmu_wdog_id - PRCMU watchdog IDs + * @PRCMU_WDOG_ALL: use all timers + * @PRCMU_WDOG_CPU1: use first CPU timer only + * @PRCMU_WDOG_CPU2: use second CPU timer conly + */ +enum prcmu_wdog_id { + PRCMU_WDOG_ALL = 0x00, + PRCMU_WDOG_CPU1 = 0x01, + PRCMU_WDOG_CPU2 = 0x02, +}; + /** * enum ape_opp - APE OPP states definition * @APE_OPP_INIT: diff --git a/include/linux/mfd/max8925.h b/include/linux/mfd/max8925.h index 74d8e2969630de5689957cff6ec0b5fc1e459ffd..ce8502e9e7dcba93f90f90334ceeaeceb1885bc9 100644 --- a/include/linux/mfd/max8925.h +++ b/include/linux/mfd/max8925.h @@ -190,6 +190,8 @@ enum { MAX8925_NR_IRQS, }; + + struct max8925_chip { struct device *dev; struct i2c_client *i2c; @@ -201,7 +203,6 @@ struct max8925_chip { int irq_base; int core_irq; int tsc_irq; - unsigned int wakeup_flag; }; diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h index 29f6616e12f07605379c6b21aa9bad1ff9152df3..a4d13d7cd00187cf2928de2d651d486388078224 100644 --- a/include/linux/mfd/palmas.h +++ b/include/linux/mfd/palmas.h @@ -2789,4 +2789,56 @@ enum usb_irq_events { #define PALMAS_GPADC_TRIM15 0xE #define PALMAS_GPADC_TRIM16 0xF +static inline int palmas_read(struct palmas *palmas, unsigned int base, + unsigned int reg, unsigned int *val) +{ + unsigned int addr = PALMAS_BASE_TO_REG(base, reg); + int slave_id = PALMAS_BASE_TO_SLAVE(base); + + return regmap_read(palmas->regmap[slave_id], addr, val); +} + +static inline int palmas_write(struct palmas *palmas, unsigned int base, + unsigned int reg, unsigned int value) +{ + unsigned int addr = PALMAS_BASE_TO_REG(base, reg); + int slave_id = PALMAS_BASE_TO_SLAVE(base); + + return regmap_write(palmas->regmap[slave_id], addr, value); +} + +static inline int palmas_bulk_write(struct palmas *palmas, unsigned int base, + unsigned int reg, const void *val, size_t val_count) +{ + unsigned int addr = PALMAS_BASE_TO_REG(base, reg); + int slave_id = PALMAS_BASE_TO_SLAVE(base); + + return regmap_bulk_write(palmas->regmap[slave_id], addr, + val, val_count); +} + +static inline int palmas_bulk_read(struct palmas *palmas, unsigned int base, + unsigned int reg, void *val, size_t val_count) +{ + unsigned int addr = PALMAS_BASE_TO_REG(base, reg); + int slave_id = PALMAS_BASE_TO_SLAVE(base); + + return regmap_bulk_read(palmas->regmap[slave_id], addr, + val, val_count); +} + +static inline int palmas_update_bits(struct palmas *palmas, unsigned int base, + unsigned int reg, unsigned int mask, unsigned int val) +{ + unsigned int addr = PALMAS_BASE_TO_REG(base, reg); + int slave_id = PALMAS_BASE_TO_SLAVE(base); + + return regmap_update_bits(palmas->regmap[slave_id], addr, mask, val); +} + +static inline int palmas_irq_get_virq(struct palmas *palmas, int irq) +{ + return regmap_irq_get_virq(palmas->irq_data, irq); +} + #endif /* __LINUX_MFD_PALMAS_H */ diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h index 4b117a3f54d493f59393226c6351e1fa8c1e16ca..26ea7f1b7caf1876626cd5275ddc372611e0933c 100644 --- a/include/linux/mfd/rtsx_pci.h +++ b/include/linux/mfd/rtsx_pci.h @@ -465,7 +465,7 @@ #define SD_RSP_TYPE_R6 0x01 #define SD_RSP_TYPE_R7 0x01 -/* SD_CONFIURE3 */ +/* SD_CONFIGURE3 */ #define SD_RSP_80CLK_TIMEOUT_EN 0x01 /* Card Transfer Reset Register */ @@ -581,8 +581,11 @@ #define CARD_GPIO_DIR 0xFD57 #define CARD_GPIO 0xFD58 #define CARD_DATA_SOURCE 0xFD5B +#define SD30_CLK_DRIVE_SEL 0xFD5A #define CARD_SELECT 0xFD5C #define SD30_DRIVE_SEL 0xFD5E +#define SD30_CMD_DRIVE_SEL 0xFD5E +#define SD30_DAT_DRIVE_SEL 0xFD5F #define CARD_CLK_EN 0xFD69 #define SDIO_CTRL 0xFD6B #define CD_PAD_CTL 0xFD73 @@ -655,6 +658,8 @@ #define MSGTXDATA3 0xFE47 #define MSGTXCTL 0xFE48 #define PETXCFG 0xFE49 +#define LTR_CTL 0xFE4A +#define OBFF_CFG 0xFE4C #define CDRESUMECTL 0xFE52 #define WAKE_SEL_CTL 0xFE54 @@ -735,6 +740,7 @@ struct rtsx_pcr { unsigned int card_inserted; unsigned int card_removed; + unsigned int card_exist; struct delayed_work carddet_work; struct delayed_work idle_work; @@ -799,6 +805,7 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock, u8 ssc_depth, bool initial_mode, bool double_clk, bool vpclk); int rtsx_pci_card_power_on(struct rtsx_pcr *pcr, int card); int rtsx_pci_card_power_off(struct rtsx_pcr *pcr, int card); +int rtsx_pci_card_exclusive_check(struct rtsx_pcr *pcr, int card); int rtsx_pci_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage); unsigned int rtsx_pci_card_exist(struct rtsx_pcr *pcr); void rtsx_pci_complete_unfinished_transfer(struct rtsx_pcr *pcr); diff --git a/include/linux/platform_data/usb-omap.h b/include/linux/platform_data/usb-omap.h index e697c85ad3bc47cead3127723c4a3db08bae6b3b..fa579b4c666b185c2912372b1c1148c0e6efbdbc 100644 --- a/include/linux/platform_data/usb-omap.h +++ b/include/linux/platform_data/usb-omap.h @@ -55,6 +55,7 @@ struct ohci_hcd_omap_platform_data { }; struct usbhs_omap_platform_data { + int nports; enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; int reset_gpio_port[OMAP3_HS_USB_PORTS]; struct regulator *regulator[OMAP3_HS_USB_PORTS]; diff --git a/include/linux/platform_data/ux500_wdt.h b/include/linux/platform_data/ux500_wdt.h new file mode 100644 index 0000000000000000000000000000000000000000..1689ff4c3bfd1c0324e7f18a47999fc89d57ba53 --- /dev/null +++ b/include/linux/platform_data/ux500_wdt.h @@ -0,0 +1,19 @@ +/* + * Copyright (C) ST Ericsson SA 2011 + * + * License Terms: GNU General Public License v2 + * + * STE Ux500 Watchdog platform data + */ +#ifndef __UX500_WDT_H +#define __UX500_WDT_H + +/** + * struct ux500_wdt_data + */ +struct ux500_wdt_data { + unsigned int timeout; + bool has_28_bits_resolution; +}; + +#endif /* __UX500_WDT_H */ diff --git a/include/linux/vexpress.h b/include/linux/vexpress.h index c52215ff4245c7a6b65eee7f3852042cca6ccd45..75818744ab5998bdb3f88de62ff87e319548272d 100644 --- a/include/linux/vexpress.h +++ b/include/linux/vexpress.h @@ -27,6 +27,14 @@ #define VEXPRESS_GPIO_MMC_CARDIN 0 #define VEXPRESS_GPIO_MMC_WPROT 1 #define VEXPRESS_GPIO_FLASH_WPn 2 +#define VEXPRESS_GPIO_LED0 3 +#define VEXPRESS_GPIO_LED1 4 +#define VEXPRESS_GPIO_LED2 5 +#define VEXPRESS_GPIO_LED3 6 +#define VEXPRESS_GPIO_LED4 7 +#define VEXPRESS_GPIO_LED5 8 +#define VEXPRESS_GPIO_LED6 9 +#define VEXPRESS_GPIO_LED7 10 #define VEXPRESS_RES_FUNC(_site, _func) \ { \