提交 aa0e8833 编写于 作者: D Dave Chinner 提交者: Ben Myers

xfs: use blocks for storing the desired IO size

Now that we pass block counts everywhere, and index buffers by block
number and length in units of blocks, convert the desired IO size
into block counts rather than bytes. Convert the code to use block
counts, and those that need byte counts get converted at the time of
use.

Rename the b_desired_count variable to something closer to it's
purpose - b_io_length - as it is only used to specify the length of
an IO for a subset of the buffer.  The only time this is used is for
log IO - both writing iclogs and during log recovery. In all other
cases, the b_io_length matches b_length, and hence a lot of code
confuses the two. e.g. the buf item code uses the io count
exclusively when it should be using the buffer length. Fix these
apprpriately as they are found.

Also, remove the XFS_BUF_{SET_}COUNT() macros that are just wrappers
around the desired IO length. They only serve to make the code
shouty loud, don't actually add any real value, and are often used
incorrectly.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMark Tinguely <tinguely@sgi.com>
Signed-off-by: NBen Myers <bpm@sgi.com>
上级 4e94b71b
......@@ -198,12 +198,12 @@ xfs_buf_alloc(
bp->b_target = target;
/*
* Set length and count_desired to the same value initially.
* I/O routines should use count_desired, which will be the same in
* Set length and io_length to the same value initially.
* I/O routines should use io_length, which will be the same in
* most cases but may be reset (e.g. XFS recovery).
*/
bp->b_length = numblks;
bp->b_count_desired = numblks << BBSHIFT;
bp->b_io_length = numblks;
bp->b_flags = flags;
/*
......@@ -302,7 +302,7 @@ xfs_buf_allocate_memory(
xfs_buf_t *bp,
uint flags)
{
size_t size = bp->b_count_desired;
size_t size;
size_t nbytes, offset;
gfp_t gfp_mask = xb_to_gfp(flags);
unsigned short page_count, i;
......@@ -345,6 +345,7 @@ xfs_buf_allocate_memory(
return error;
offset = bp->b_offset;
size = BBTOB(bp->b_length);
bp->b_flags |= _XBF_PAGES;
for (i = 0; i < bp->b_page_count; i++) {
......@@ -575,7 +576,7 @@ xfs_buf_get(
* that we can do IO on it.
*/
bp->b_bn = blkno;
bp->b_count_desired = BBTOB(bp->b_length);
bp->b_io_length = bp->b_length;
found:
if (!(bp->b_flags & XBF_MAPPED)) {
......@@ -718,7 +719,7 @@ xfs_buf_set_empty(
bp->b_page_count = 0;
bp->b_addr = NULL;
bp->b_length = numblks;
bp->b_count_desired = numblks << BBSHIFT;
bp->b_io_length = numblks;
bp->b_bn = XFS_BUF_DADDR_NULL;
bp->b_flags &= ~XBF_MAPPED;
}
......@@ -770,7 +771,7 @@ xfs_buf_associate_memory(
pageaddr += PAGE_SIZE;
}
bp->b_count_desired = len;
bp->b_io_length = BTOBB(len);
bp->b_length = BTOBB(buflen);
bp->b_flags |= XBF_MAPPED;
......@@ -1012,9 +1013,8 @@ xfs_buf_ioerror_alert(
const char *func)
{
xfs_alert(bp->b_target->bt_mount,
"metadata I/O error: block 0x%llx (\"%s\") error %d buf count %zd",
(__uint64_t)XFS_BUF_ADDR(bp), func,
bp->b_error, XFS_BUF_COUNT(bp));
"metadata I/O error: block 0x%llx (\"%s\") error %d numblks %d",
(__uint64_t)XFS_BUF_ADDR(bp), func, bp->b_error, bp->b_length);
}
int
......@@ -1186,7 +1186,7 @@ _xfs_buf_ioapply(
int rw, map_i, total_nr_pages, nr_pages;
struct bio *bio;
int offset = bp->b_offset;
int size = bp->b_count_desired;
int size = BBTOB(bp->b_io_length);
sector_t sector = bp->b_bn;
total_nr_pages = bp->b_page_count;
......@@ -1234,7 +1234,7 @@ _xfs_buf_ioapply(
break;
offset = 0;
sector += nbytes >> BBSHIFT;
sector += BTOBB(nbytes);
size -= nbytes;
total_nr_pages--;
}
......@@ -1328,7 +1328,7 @@ xfs_buf_iomove(
page = bp->b_pages[xfs_buf_btoct(boff + bp->b_offset)];
cpoff = xfs_buf_poff(boff + bp->b_offset);
csize = min_t(size_t,
PAGE_SIZE-cpoff, bp->b_count_desired-boff);
PAGE_SIZE - cpoff, BBTOB(bp->b_io_length) - boff);
ASSERT(((csize + cpoff) <= PAGE_SIZE));
......
......@@ -128,7 +128,6 @@ typedef struct xfs_buf {
struct list_head b_list;
struct xfs_perag *b_pag; /* contains rbtree root */
xfs_buftarg_t *b_target; /* buffer target (device) */
size_t b_count_desired;/* desired transfer size */
void *b_addr; /* virtual address of buffer */
struct work_struct b_iodone_work;
xfs_buf_iodone_t b_iodone; /* I/O completion function */
......@@ -137,6 +136,7 @@ typedef struct xfs_buf {
struct xfs_trans *b_transp;
struct page **b_pages; /* array of page pointers */
struct page *b_page_array[XB_PAGES]; /* inline pages */
int b_io_length; /* IO size in BBs */
atomic_t b_pin_count; /* pin count */
atomic_t b_io_remaining; /* #outstanding I/O requests */
unsigned int b_page_count; /* size of page array */
......@@ -244,8 +244,6 @@ void xfs_buf_stale(struct xfs_buf *bp);
#define XFS_BUF_ADDR(bp) ((bp)->b_bn)
#define XFS_BUF_SET_ADDR(bp, bno) ((bp)->b_bn = (xfs_daddr_t)(bno))
#define XFS_BUF_COUNT(bp) ((bp)->b_count_desired)
#define XFS_BUF_SET_COUNT(bp, cnt) ((bp)->b_count_desired = (cnt))
static inline void xfs_buf_set_ref(struct xfs_buf *bp, int lru_ref)
{
......
......@@ -123,11 +123,11 @@ xfs_buf_item_log_check(
ASSERT(bip->bli_logged != NULL);
bp = bip->bli_buf;
ASSERT(XFS_BUF_COUNT(bp) > 0);
ASSERT(bp->b_length > 0);
ASSERT(bp->b_addr != NULL);
orig = bip->bli_orig;
buffer = bp->b_addr;
for (x = 0; x < XFS_BUF_COUNT(bp); x++) {
for (x = 0; x < BBTOB(bp->b_length); x++) {
if (orig[x] != buffer[x] && !btst(bip->bli_logged, x)) {
xfs_emerg(bp->b_mount,
"%s: bip %x buffer %x orig %x index %d",
......@@ -657,7 +657,8 @@ xfs_buf_item_init(
* truncate any pieces. map_size is the size of the
* bitmap needed to describe the chunks of the buffer.
*/
chunks = (int)((XFS_BUF_COUNT(bp) + (XFS_BLF_CHUNK - 1)) >> XFS_BLF_SHIFT);
chunks = (int)((BBTOB(bp->b_length) + (XFS_BLF_CHUNK - 1)) >>
XFS_BLF_SHIFT);
map_size = (int)((chunks + NBWORD) >> BIT_TO_WORD_SHIFT);
bip = (xfs_buf_log_item_t*)kmem_zone_zalloc(xfs_buf_item_zone,
......@@ -667,7 +668,7 @@ xfs_buf_item_init(
xfs_buf_hold(bp);
bip->bli_format.blf_type = XFS_LI_BUF;
bip->bli_format.blf_blkno = (__int64_t)XFS_BUF_ADDR(bp);
bip->bli_format.blf_len = (ushort)BTOBB(XFS_BUF_COUNT(bp));
bip->bli_format.blf_len = (ushort)bp->b_length;
bip->bli_format.blf_map_size = map_size;
#ifdef XFS_TRANS_DEBUG
......@@ -679,9 +680,9 @@ xfs_buf_item_init(
* the buffer to indicate which bytes the callers have asked
* to have logged.
*/
bip->bli_orig = (char *)kmem_alloc(XFS_BUF_COUNT(bp), KM_SLEEP);
memcpy(bip->bli_orig, bp->b_addr, XFS_BUF_COUNT(bp));
bip->bli_logged = (char *)kmem_zalloc(XFS_BUF_COUNT(bp) / NBBY, KM_SLEEP);
bip->bli_orig = kmem_alloc(BBTOB(bp->b_length), KM_SLEEP);
memcpy(bip->bli_orig, bp->b_addr, BBTOB(bp->b_length));
bip->bli_logged = kmem_zalloc(BBTOB(bp->b_length) / NBBY, KM_SLEEP);
#endif
/*
......
......@@ -2277,20 +2277,20 @@ xfs_da_buf_make(int nbuf, xfs_buf_t **bps)
if (nbuf == 1) {
dabuf->nbuf = 1;
bp = bps[0];
dabuf->bbcount = (short)BTOBB(XFS_BUF_COUNT(bp));
dabuf->bbcount = bp->b_length;
dabuf->data = bp->b_addr;
dabuf->bps[0] = bp;
} else {
dabuf->nbuf = nbuf;
for (i = 0, dabuf->bbcount = 0; i < nbuf; i++) {
dabuf->bps[i] = bp = bps[i];
dabuf->bbcount += BTOBB(XFS_BUF_COUNT(bp));
dabuf->bbcount += bp->b_length;
}
dabuf->data = kmem_alloc(BBTOB(dabuf->bbcount), KM_SLEEP);
for (i = off = 0; i < nbuf; i++, off += XFS_BUF_COUNT(bp)) {
for (i = off = 0; i < nbuf; i++, off += BBTOB(bp->b_length)) {
bp = bps[i];
memcpy((char *)dabuf->data + off, bp->b_addr,
XFS_BUF_COUNT(bp));
BBTOB(bp->b_length));
}
}
return dabuf;
......@@ -2310,10 +2310,10 @@ xfs_da_buf_clean(xfs_dabuf_t *dabuf)
ASSERT(dabuf->nbuf > 1);
dabuf->dirty = 0;
for (i = off = 0; i < dabuf->nbuf;
i++, off += XFS_BUF_COUNT(bp)) {
i++, off += BBTOB(bp->b_length)) {
bp = dabuf->bps[i];
memcpy(bp->b_addr, dabuf->data + off,
XFS_BUF_COUNT(bp));
BBTOB(bp->b_length));
}
}
}
......@@ -2356,10 +2356,10 @@ xfs_da_log_buf(xfs_trans_t *tp, xfs_dabuf_t *dabuf, uint first, uint last)
}
dabuf->dirty = 1;
ASSERT(first <= last);
for (i = off = 0; i < dabuf->nbuf; i++, off += XFS_BUF_COUNT(bp)) {
for (i = off = 0; i < dabuf->nbuf; i++, off += BBTOB(bp->b_length)) {
bp = dabuf->bps[i];
f = off;
l = f + XFS_BUF_COUNT(bp) - 1;
l = f + BBTOB(bp->b_length) - 1;
if (f < first)
f = first;
if (l > last)
......
......@@ -1487,7 +1487,7 @@ xlog_sync(xlog_t *log,
} else {
iclog->ic_bwritecnt = 1;
}
XFS_BUF_SET_COUNT(bp, count);
bp->b_io_length = BTOBB(count);
bp->b_fspriv = iclog;
XFS_BUF_ZEROFLAGS(bp);
XFS_BUF_ASYNC(bp);
......
......@@ -178,7 +178,7 @@ xlog_bread_noalign(
XFS_BUF_SET_ADDR(bp, log->l_logBBstart + blk_no);
XFS_BUF_READ(bp);
XFS_BUF_SET_COUNT(bp, BBTOB(nbblks));
bp->b_io_length = nbblks;
bp->b_error = 0;
xfsbdstrat(log->l_mp, bp);
......@@ -266,7 +266,7 @@ xlog_bwrite(
XFS_BUF_ZEROFLAGS(bp);
xfs_buf_hold(bp);
xfs_buf_lock(bp);
XFS_BUF_SET_COUNT(bp, BBTOB(nbblks));
bp->b_io_length = nbblks;
bp->b_error = 0;
error = xfs_bwrite(bp);
......@@ -1778,7 +1778,7 @@ xlog_recover_do_inode_buffer(
trace_xfs_log_recover_buf_inode_buf(mp->m_log, buf_f);
inodes_per_buf = XFS_BUF_COUNT(bp) >> mp->m_sb.sb_inodelog;
inodes_per_buf = BBTOB(bp->b_io_length) >> mp->m_sb.sb_inodelog;
for (i = 0; i < inodes_per_buf; i++) {
next_unlinked_offset = (i * mp->m_sb.sb_inodesize) +
offsetof(xfs_dinode_t, di_next_unlinked);
......@@ -1820,7 +1820,8 @@ xlog_recover_do_inode_buffer(
ASSERT(item->ri_buf[item_index].i_addr != NULL);
ASSERT((item->ri_buf[item_index].i_len % XFS_BLF_CHUNK) == 0);
ASSERT((reg_buf_offset + reg_buf_bytes) <= XFS_BUF_COUNT(bp));
ASSERT((reg_buf_offset + reg_buf_bytes) <=
BBTOB(bp->b_io_length));
/*
* The current logged region contains a copy of the
......@@ -1879,8 +1880,8 @@ xlog_recover_do_reg_buffer(
ASSERT(nbits > 0);
ASSERT(item->ri_buf[i].i_addr != NULL);
ASSERT(item->ri_buf[i].i_len % XFS_BLF_CHUNK == 0);
ASSERT(XFS_BUF_COUNT(bp) >=
((uint)bit << XFS_BLF_SHIFT)+(nbits<<XFS_BLF_SHIFT));
ASSERT(BBTOB(bp->b_io_length) >=
((uint)bit << XFS_BLF_SHIFT) + (nbits << XFS_BLF_SHIFT));
/*
* Do a sanity check if this is a dquot buffer. Just checking
......@@ -2173,7 +2174,7 @@ xlog_recover_buffer_pass2(
*/
if (XFS_DINODE_MAGIC ==
be16_to_cpu(*((__be16 *)xfs_buf_offset(bp, 0))) &&
(XFS_BUF_COUNT(bp) != MAX(log->l_mp->m_sb.sb_blocksize,
(BBTOB(bp->b_io_length) != MAX(log->l_mp->m_sb.sb_blocksize,
(__uint32_t)XFS_INODE_CLUSTER_SIZE(log->l_mp)))) {
xfs_buf_stale(bp);
error = xfs_bwrite(bp);
......
......@@ -56,7 +56,7 @@ xfs_trans_buf_item_match(
if (blip->bli_item.li_type == XFS_LI_BUF &&
blip->bli_buf->b_target == target &&
XFS_BUF_ADDR(blip->bli_buf) == blkno &&
XFS_BUF_COUNT(blip->bli_buf) == len)
BBTOB(blip->bli_buf->b_length) == len)
return blip->bli_buf;
}
......@@ -585,7 +585,7 @@ xfs_trans_log_buf(xfs_trans_t *tp,
ASSERT(bp->b_transp == tp);
ASSERT(bip != NULL);
ASSERT((first <= last) && (last < XFS_BUF_COUNT(bp)));
ASSERT(first <= last && last < BBTOB(bp->b_length));
ASSERT(bp->b_iodone == NULL ||
bp->b_iodone == xfs_buf_iodone_callbacks);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册