From a8e8b7ff35175ab0a55ef0fa8560c3d5ffdb2818 Mon Sep 17 00:00:00 2001 From: Salil Date: Mon, 21 Aug 2017 17:05:24 +0100 Subject: [PATCH] net: hns3: Add support to change MTU in HNS3 hardware This patch adds the following support to the HNS3 driver: 1. Support to change the Maximum Transmission Unit of a port in the HNS NIC hardware. 2. Initializes the supported MTU range for the netdevice. Signed-off-by: lipeng Signed-off-by: Salil Mehta Reviewed-by: Andrew Lunn Reviewed-by: Leon Romanovsky Signed-off-by: David S. Miller --- .../hisilicon/hns3/hns3pf/hns3_enet.c | 34 +++++++++++++++++++ .../hisilicon/hns3/hns3pf/hns3_enet.h | 1 + 2 files changed, 35 insertions(+) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c index e731f87f3c46..1c3e29447891 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c @@ -1278,11 +1278,42 @@ static int hns3_ndo_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, return ret; } +static int hns3_nic_change_mtu(struct net_device *netdev, int new_mtu) +{ + struct hns3_nic_priv *priv = netdev_priv(netdev); + struct hnae3_handle *h = priv->ae_handle; + bool if_running = netif_running(netdev); + int ret; + + if (!h->ae_algo->ops->set_mtu) + return -EOPNOTSUPP; + + /* if this was called with netdev up then bring netdevice down */ + if (if_running) { + (void)hns3_nic_net_stop(netdev); + msleep(100); + } + + ret = h->ae_algo->ops->set_mtu(h, new_mtu); + if (ret) { + netdev_err(netdev, "failed to change MTU in hardware %d\n", + ret); + return ret; + } + + /* if the netdev was running earlier, bring it up again */ + if (if_running && hns3_nic_net_open(netdev)) + ret = -EINVAL; + + return ret; +} + static const struct net_device_ops hns3_nic_netdev_ops = { .ndo_open = hns3_nic_net_open, .ndo_stop = hns3_nic_net_stop, .ndo_start_xmit = hns3_nic_net_xmit, .ndo_set_mac_address = hns3_nic_net_set_mac_address, + .ndo_change_mtu = hns3_nic_change_mtu, .ndo_set_features = hns3_nic_set_features, .ndo_get_stats64 = hns3_nic_get_stats64, .ndo_setup_tc = hns3_nic_setup_tc, @@ -2752,6 +2783,9 @@ static int hns3_client_init(struct hnae3_handle *handle) goto out_reg_netdev_fail; } + /* MTU range: (ETH_MIN_MTU(kernel default) - 9706) */ + netdev->max_mtu = HNS3_MAX_MTU - (ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN); + return ret; out_reg_netdev_fail: diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.h index a6e8f15a4669..7e8746189747 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.h @@ -76,6 +76,7 @@ enum hns3_nic_state { #define HNS3_RING_NAME_LEN 16 #define HNS3_BUFFER_SIZE_2048 2048 #define HNS3_RING_MAX_PENDING 32768 +#define HNS3_MAX_MTU 9728 #define HNS3_BD_SIZE_512_TYPE 0 #define HNS3_BD_SIZE_1024_TYPE 1 -- GitLab