From a85feb8cfc53c08b6f0d770f930ca9cc6885f414 Mon Sep 17 00:00:00 2001 From: Gary Zambrano Date: Sat, 5 May 2007 11:52:19 -0700 Subject: [PATCH] [TG3]: WoL fixes. Change TG3_FLAG_SERDES_WOL_CAP to TG3_FLAG_WOL_CAP to make it easier to manage WoL. This flag is now used consistently during ethtool WoL setup and power setting changes. Signed-off-by: Gary Zambrano Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 25 +++++++++++++++---------- drivers/net/tg3.h | 2 +- 2 files changed, 16 insertions(+), 11 deletions(-) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 00027a14eaa1..e829262ded43 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -1300,9 +1300,11 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state) msleep(1); } } - tg3_write_mem(tp, NIC_SRAM_WOL_MBOX, WOL_SIGNATURE | - WOL_DRV_STATE_SHUTDOWN | - WOL_DRV_WOL | WOL_SET_MAGIC_PKT); + if (tp->tg3_flags & TG3_FLAG_WOL_CAP) + tg3_write_mem(tp, NIC_SRAM_WOL_MBOX, WOL_SIGNATURE | + WOL_DRV_STATE_SHUTDOWN | + WOL_DRV_WOL | + WOL_SET_MAGIC_PKT); pci_read_config_word(tp->pdev, pm + PCI_PM_PMC, &power_caps); @@ -8034,7 +8036,10 @@ static void tg3_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) { struct tg3 *tp = netdev_priv(dev); - wol->supported = WAKE_MAGIC; + if (tp->tg3_flags & TG3_FLAG_WOL_CAP) + wol->supported = WAKE_MAGIC; + else + wol->supported = 0; wol->wolopts = 0; if (tp->tg3_flags & TG3_FLAG_WOL_ENABLE) wol->wolopts = WAKE_MAGIC; @@ -8048,8 +8053,7 @@ static int tg3_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) if (wol->wolopts & ~WAKE_MAGIC) return -EINVAL; if ((wol->wolopts & WAKE_MAGIC) && - tp->tg3_flags2 & TG3_FLG2_ANY_SERDES && - !(tp->tg3_flags & TG3_FLAG_SERDES_WOL_CAP)) + !(tp->tg3_flags & TG3_FLAG_WOL_CAP)) return -EINVAL; spin_lock_bh(&tp->lock); @@ -10001,8 +10005,8 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp) tp->phy_id = PHY_ID_INVALID; tp->led_ctrl = LED_CTRL_MODE_PHY_1; - /* Assume an onboard device by default. */ - tp->tg3_flags |= TG3_FLAG_EEPROM_WRITE_PROT; + /* Assume an onboard device and WOL capable by default. */ + tp->tg3_flags |= TG3_FLAG_EEPROM_WRITE_PROT | TG3_FLAG_WOL_CAP; if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) { if (!(tr32(PCIE_TRANSACTION_CFG) & PCIE_TRANS_CFG_LOM)) { @@ -10125,8 +10129,9 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp) if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS) tp->tg3_flags2 |= TG3_FLG2_ASF_NEW_HANDSHAKE; } - if (nic_cfg & NIC_SRAM_DATA_CFG_FIBER_WOL) - tp->tg3_flags |= TG3_FLAG_SERDES_WOL_CAP; + if (tp->tg3_flags2 & TG3_FLG2_ANY_SERDES && + !(nic_cfg & NIC_SRAM_DATA_CFG_FIBER_WOL)) + tp->tg3_flags &= ~TG3_FLAG_WOL_CAP; if (cfg2 & (1 << 17)) tp->tg3_flags2 |= TG3_FLG2_CAPACITIVE_COUPLING; diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index d515ed23841b..f76e3107e8d7 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -2215,7 +2215,7 @@ struct tg3 { #define TG3_FLAG_PCI_32BIT 0x00080000 #define TG3_FLAG_SRAM_USE_CONFIG 0x00100000 #define TG3_FLAG_TX_RECOVERY_PENDING 0x00200000 -#define TG3_FLAG_SERDES_WOL_CAP 0x00400000 +#define TG3_FLAG_WOL_CAP 0x00400000 #define TG3_FLAG_JUMBO_RING_ENABLE 0x00800000 #define TG3_FLAG_10_100_ONLY 0x01000000 #define TG3_FLAG_PAUSE_AUTONEG 0x02000000 -- GitLab