提交 a5ccfe5c 编写于 作者: R Ralf Baechle

[MIPS] Lasat: Fix build by conversion to irq_cpu.c.

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
上级 951e4714
......@@ -133,6 +133,7 @@ config LASAT
select DMA_NONCOHERENT
select SYS_HAS_EARLY_PRINTK
select HW_HAS_PCI
select IRQ_CPU
select PCI_GT64XXX_PCI0
select MIPS_NILE4
select R5000_CPU_SCACHE
......
......@@ -26,6 +26,7 @@
#include <linux/kernel_stat.h>
#include <asm/bootinfo.h>
#include <asm/irq_cpu.h>
#include <asm/lasat/lasatint.h>
#include <asm/time.h>
#include <asm/gdb-stub.h>
......@@ -88,7 +89,7 @@ asmlinkage void plat_irq_dispatch(void)
int irq;
if (cause & CAUSEF_IP7) { /* R4000 count / compare IRQ */
ll_timer_interrupt(7);
do_IRQ(7);
return;
}
......@@ -96,7 +97,7 @@ asmlinkage void plat_irq_dispatch(void)
/* if int_status == 0, then the interrupt has already been cleared */
if (int_status) {
irq = ls1bit32(int_status);
irq = LASATINT_BASE + ls1bit32(int_status);
do_IRQ(irq);
}
......@@ -125,6 +126,7 @@ void __init arch_init_irq(void)
panic("arch_init_irq: mips_machtype incorrect");
}
for (i = 0; i <= LASATINT_END; i++)
mips_cpu_irq_init();
for (i = LASATINT_BASE; i <= LASATINT_END; i++)
set_irq_chip_and_handler(i, &lasat_irq_type, handle_level_irq);
}
......@@ -10,6 +10,7 @@
#include <linux/pci.h>
#include <linux/types.h>
#include <asm/bootinfo.h>
#include <asm/lasat/lasatint.h>
extern struct pci_ops nile4_pci_ops;
extern struct pci_ops gt64xxx_pci0_ops;
......@@ -54,15 +55,15 @@ static int __init lasat_pci_setup(void)
arch_initcall(lasat_pci_setup);
#define LASATINT_ETH1 0
#define LASATINT_ETH0 1
#define LASATINT_HDC 2
#define LASATINT_COMP 3
#define LASATINT_HDLC 4
#define LASATINT_PCIA 5
#define LASATINT_PCIB 6
#define LASATINT_PCIC 7
#define LASATINT_PCID 8
#define LASATINT_ETH1 (LASATINT_BASE + 0)
#define LASATINT_ETH0 (LASATINT_BASE + 1)
#define LASATINT_HDC (LASATINT_BASE + 2)
#define LASATINT_COMP (LASATINT_BASE + 3)
#define LASATINT_HDLC (LASATINT_BASE + 4)
#define LASATINT_PCIA (LASATINT_BASE + 5)
#define LASATINT_PCIB (LASATINT_BASE + 6)
#define LASATINT_PCIC (LASATINT_BASE + 7)
#define LASATINT_PCID (LASATINT_BASE + 8)
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
......
#ifndef __ASM_LASAT_LASATINT_H
#define __ASM_LASAT_LASATINT_H
#define LASATINT_END 16
#include <linux/irq.h>
#define LASATINT_BASE MIPS_CPU_IRQ_BASE
#define LASATINT_END (LASATINT_BASE + 16)
/* lasat 100 */
#define LASAT_INT_STATUS_REG_100 (KSEG1ADDR(0x1c880000))
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册