diff --git a/drivers/net/ethernet/ibm/emac/Kconfig b/drivers/net/ethernet/ibm/emac/Kconfig
index 3f44a30e0615080973f26e256f8a20bc31501cbc..90d49191beb36880b58cf85c9c2e1cd8b41bad1d 100644
--- a/drivers/net/ethernet/ibm/emac/Kconfig
+++ b/drivers/net/ethernet/ibm/emac/Kconfig
@@ -2,6 +2,7 @@ config IBM_EMAC
 	tristate "IBM EMAC Ethernet support"
 	depends on PPC_DCR
 	select CRC32
+	select PHYLIB
 	help
 	  This driver supports the IBM EMAC family of Ethernet controllers
 	  typically found on 4xx embedded PowerPC chips, but also on the
diff --git a/drivers/net/ethernet/ibm/emac/core.c b/drivers/net/ethernet/ibm/emac/core.c
index 6ead2335a1694110136cc10fb36a0038e5e71365..275c2e2349ad92de224df1939769238d83ea5f3b 100644
--- a/drivers/net/ethernet/ibm/emac/core.c
+++ b/drivers/net/ethernet/ibm/emac/core.c
@@ -42,6 +42,7 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_net.h>
+#include <linux/of_mdio.h>
 #include <linux/slab.h>
 
 #include <asm/processor.h>
@@ -2420,6 +2421,219 @@ static int emac_read_uint_prop(struct device_node *np, const char *name,
 	return 0;
 }
 
+static void emac_adjust_link(struct net_device *ndev)
+{
+	struct emac_instance *dev = netdev_priv(ndev);
+	struct phy_device *phy = dev->phy_dev;
+
+	dev->phy.autoneg = phy->autoneg;
+	dev->phy.speed = phy->speed;
+	dev->phy.duplex = phy->duplex;
+	dev->phy.pause = phy->pause;
+	dev->phy.asym_pause = phy->asym_pause;
+	dev->phy.advertising = phy->advertising;
+}
+
+static int emac_mii_bus_read(struct mii_bus *bus, int addr, int regnum)
+{
+	int ret = emac_mdio_read(bus->priv, addr, regnum);
+	/* This is a workaround for powered down ports/phys.
+	 * In the wild, this was seen on the Cisco Meraki MX60(W).
+	 * This hardware disables ports as part of the handoff
+	 * procedure. Accessing the ports will lead to errors
+	 * (-ETIMEDOUT, -EREMOTEIO) that do more harm than good.
+	 */
+	return ret < 0 ? 0xffff : ret;
+}
+
+static int emac_mii_bus_write(struct mii_bus *bus, int addr,
+			      int regnum, u16 val)
+{
+	emac_mdio_write(bus->priv, addr, regnum, val);
+	return 0;
+}
+
+static int emac_mii_bus_reset(struct mii_bus *bus)
+{
+	struct emac_instance *dev = netdev_priv(bus->priv);
+
+	return emac_reset(dev);
+}
+
+static int emac_mdio_setup_aneg(struct mii_phy *phy, u32 advertise)
+{
+	struct net_device *ndev = phy->dev;
+	struct emac_instance *dev = netdev_priv(ndev);
+
+	dev->phy.autoneg = AUTONEG_ENABLE;
+	dev->phy.speed = SPEED_1000;
+	dev->phy.duplex = DUPLEX_FULL;
+	dev->phy.advertising = advertise;
+	phy->autoneg = AUTONEG_ENABLE;
+	phy->speed = dev->phy.speed;
+	phy->duplex = dev->phy.duplex;
+	phy->advertising = advertise;
+	return phy_start_aneg(dev->phy_dev);
+}
+
+static int emac_mdio_setup_forced(struct mii_phy *phy, int speed, int fd)
+{
+	struct net_device *ndev = phy->dev;
+	struct emac_instance *dev = netdev_priv(ndev);
+
+	dev->phy.autoneg =  AUTONEG_DISABLE;
+	dev->phy.speed = speed;
+	dev->phy.duplex = fd;
+	phy->autoneg = AUTONEG_DISABLE;
+	phy->speed = speed;
+	phy->duplex = fd;
+	return phy_start_aneg(dev->phy_dev);
+}
+
+static int emac_mdio_poll_link(struct mii_phy *phy)
+{
+	struct net_device *ndev = phy->dev;
+	struct emac_instance *dev = netdev_priv(ndev);
+	int res;
+
+	res = phy_read_status(dev->phy_dev);
+	if (res) {
+		dev_err(&dev->ofdev->dev, "link update failed (%d).", res);
+		return ethtool_op_get_link(ndev);
+	}
+
+	return dev->phy_dev->link;
+}
+
+static int emac_mdio_read_link(struct mii_phy *phy)
+{
+	struct net_device *ndev = phy->dev;
+	struct emac_instance *dev = netdev_priv(ndev);
+	int res;
+
+	res = phy_read_status(dev->phy_dev);
+	if (res)
+		return res;
+
+	dev->phy.speed = phy->speed;
+	dev->phy.duplex = phy->duplex;
+	dev->phy.pause = phy->pause;
+	dev->phy.asym_pause = phy->asym_pause;
+	return 0;
+}
+
+static int emac_mdio_init_phy(struct mii_phy *phy)
+{
+	struct net_device *ndev = phy->dev;
+	struct emac_instance *dev = netdev_priv(ndev);
+
+	phy_start(dev->phy_dev);
+	dev->phy.autoneg = phy->autoneg;
+	dev->phy.speed = phy->speed;
+	dev->phy.duplex = phy->duplex;
+	dev->phy.advertising = phy->advertising;
+	dev->phy.pause = phy->pause;
+	dev->phy.asym_pause = phy->asym_pause;
+
+	return phy_init_hw(dev->phy_dev);
+}
+
+static const struct mii_phy_ops emac_dt_mdio_phy_ops = {
+	.init		= emac_mdio_init_phy,
+	.setup_aneg	= emac_mdio_setup_aneg,
+	.setup_forced	= emac_mdio_setup_forced,
+	.poll_link	= emac_mdio_poll_link,
+	.read_link	= emac_mdio_read_link,
+};
+
+static int emac_dt_mdio_probe(struct emac_instance *dev)
+{
+	struct device_node *mii_np;
+	int res;
+
+	mii_np = of_get_child_by_name(dev->ofdev->dev.of_node, "mdio");
+	if (!mii_np) {
+		dev_err(&dev->ofdev->dev, "no mdio definition found.");
+		return -ENODEV;
+	}
+
+	if (!of_device_is_available(mii_np)) {
+		res = -ENODEV;
+		goto put_node;
+	}
+
+	dev->mii_bus = devm_mdiobus_alloc(&dev->ofdev->dev);
+	if (!dev->mii_bus) {
+		res = -ENOMEM;
+		goto put_node;
+	}
+
+	dev->mii_bus->priv = dev->ndev;
+	dev->mii_bus->parent = dev->ndev->dev.parent;
+	dev->mii_bus->name = "emac_mdio";
+	dev->mii_bus->read = &emac_mii_bus_read;
+	dev->mii_bus->write = &emac_mii_bus_write;
+	dev->mii_bus->reset = &emac_mii_bus_reset;
+	snprintf(dev->mii_bus->id, MII_BUS_ID_SIZE, "%s", dev->ofdev->name);
+	res = of_mdiobus_register(dev->mii_bus, mii_np);
+	if (res) {
+		dev_err(&dev->ofdev->dev, "cannot register MDIO bus %s (%d)",
+			dev->mii_bus->name, res);
+	}
+
+ put_node:
+	of_node_put(mii_np);
+	return res;
+}
+
+static int emac_dt_phy_connect(struct emac_instance *dev,
+			       struct device_node *phy_handle)
+{
+	int res;
+
+	dev->phy.def = devm_kzalloc(&dev->ofdev->dev, sizeof(*dev->phy.def),
+				    GFP_KERNEL);
+	if (!dev->phy.def)
+		return -ENOMEM;
+
+	dev->phy_dev = of_phy_connect(dev->ndev, phy_handle, &emac_adjust_link,
+				      0, dev->phy_mode);
+	if (!dev->phy_dev) {
+		dev_err(&dev->ofdev->dev, "failed to connect to PHY.\n");
+		return -ENODEV;
+	}
+
+	dev->phy.def->phy_id = dev->phy_dev->drv->phy_id;
+	dev->phy.def->phy_id_mask = dev->phy_dev->drv->phy_id_mask;
+	dev->phy.def->name = dev->phy_dev->drv->name;
+	dev->phy.def->ops = &emac_dt_mdio_phy_ops;
+	dev->phy.features = dev->phy_dev->supported;
+	dev->phy.address = dev->phy_dev->mdio.addr;
+	dev->phy.mode = dev->phy_dev->interface;
+	return 0;
+}
+
+static int emac_dt_phy_probe(struct emac_instance *dev)
+{
+	struct device_node *np = dev->ofdev->dev.of_node;
+	struct device_node *phy_handle;
+	int res = 0;
+
+	phy_handle = of_parse_phandle(np, "phy-handle", 0);
+
+	if (phy_handle) {
+		res = emac_dt_mdio_probe(dev);
+		if (!res) {
+			res = emac_dt_phy_connect(dev, phy_handle);
+			if (res)
+				mdiobus_unregister(dev->mii_bus);
+		}
+	}
+
+	of_node_put(phy_handle);
+	return res;
+}
+
 static int emac_init_phy(struct emac_instance *dev)
 {
 	struct device_node *np = dev->ofdev->dev.of_node;
@@ -2430,15 +2644,12 @@ static int emac_init_phy(struct emac_instance *dev)
 	dev->phy.dev = ndev;
 	dev->phy.mode = dev->phy_mode;
 
-	/* PHY-less configuration.
-	 * XXX I probably should move these settings to the dev tree
-	 */
-	if (dev->phy_address == 0xffffffff && dev->phy_map == 0xffffffff) {
+	/* PHY-less configuration. */
+	if ((dev->phy_address == 0xffffffff && dev->phy_map == 0xffffffff) ||
+	    of_phy_is_fixed_link(np)) {
 		emac_reset(dev);
 
-		/* PHY-less configuration.
-		 * XXX I probably should move these settings to the dev tree
-		 */
+		/* PHY-less configuration. */
 		dev->phy.address = -1;
 		dev->phy.features = SUPPORTED_MII;
 		if (emac_phy_supports_gige(dev->phy_mode))
@@ -2447,6 +2658,16 @@ static int emac_init_phy(struct emac_instance *dev)
 			dev->phy.features |= SUPPORTED_100baseT_Full;
 		dev->phy.pause = 1;
 
+		if (of_phy_is_fixed_link(np)) {
+			int res = emac_dt_mdio_probe(dev);
+
+			if (!res) {
+				res = of_phy_register_fixed_link(np);
+				if (res)
+					mdiobus_unregister(dev->mii_bus);
+			}
+			return res;
+		}
 		return 0;
 	}
 
@@ -2490,6 +2711,18 @@ static int emac_init_phy(struct emac_instance *dev)
 
 	emac_configure(dev);
 
+	if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII)) {
+		int res = emac_dt_phy_probe(dev);
+
+		mutex_unlock(&emac_phy_map_lock);
+		if (!res)
+			goto init_phy;
+
+		dev_err(&dev->ofdev->dev, "failed to attach dt phy (%d).\n",
+			res);
+		return res;
+	}
+
 	if (dev->phy_address != 0xffffffff)
 		phy_map = ~(1 << dev->phy_address);
 
@@ -2517,6 +2750,7 @@ static int emac_init_phy(struct emac_instance *dev)
 		return -ENXIO;
 	}
 
+ init_phy:
 	/* Init PHY */
 	if (dev->phy.def->ops->init)
 		dev->phy.def->ops->init(&dev->phy);
@@ -2988,6 +3222,12 @@ static int emac_remove(struct platform_device *ofdev)
 	if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII))
 		zmii_detach(dev->zmii_dev, dev->zmii_port);
 
+	if (dev->phy_dev)
+		phy_disconnect(dev->phy_dev);
+
+	if (dev->mii_bus)
+		mdiobus_unregister(dev->mii_bus);
+
 	busy_phy_map &= ~(1 << dev->phy.address);
 	DBG(dev, "busy_phy_map now %#x" NL, busy_phy_map);
 
diff --git a/drivers/net/ethernet/ibm/emac/core.h b/drivers/net/ethernet/ibm/emac/core.h
index 93ae11494810a2a3d9804309cf175a9e967ce27e..0710a6685489355fdd74b89259be8b360b52c557 100644
--- a/drivers/net/ethernet/ibm/emac/core.h
+++ b/drivers/net/ethernet/ibm/emac/core.h
@@ -199,6 +199,10 @@ struct emac_instance {
 	struct emac_instance		*mdio_instance;
 	struct mutex			mdio_lock;
 
+	/* Device-tree based phy configuration */
+	struct mii_bus			*mii_bus;
+	struct phy_device		*phy_dev;
+
 	/* ZMII infos if any */
 	u32				zmii_ph;
 	u32				zmii_port;