i2c: i801: Add support for Intel Comet Lake

[ Upstream commit 5cd1c56c ]

Add PCI ID for Intel Comet Lake PCH.
Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: NJean Delvare <jdelvare@suse.de>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Signed-off-by: NSasha Levin (Microsoft) <sashal@kernel.org>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

Documentation/i2c/busses/i2c-i801

@@ -36,6 +36,7 @@ Supported adapters:
   * Intel Cannon Lake (PCH)
   * Intel Cedar Fork (PCH)
   * Intel Ice Lake (PCH)
+  * Intel Comet Lake (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller

drivers/i2c/busses/Kconfig

@@ -131,6 +131,7 @@ config I2C_I801
 	    Cannon Lake (PCH)
 	    Cedar Fork (PCH)
 	    Ice Lake (PCH)
+	    Comet Lake (PCH)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.

drivers/i2c/busses/i2c-i801.c

@@ -71,6 +71,7 @@
  * Cannon Lake-LP (PCH)		0x9da3	32	hard	yes	yes	yes
  * Cedar Fork (PCH)		0x18df	32	hard	yes	yes	yes
  * Ice Lake-LP (PCH)		0x34a3	32	hard	yes	yes	yes
+ * Comet Lake (PCH)		0x02a3	32	hard	yes	yes	yes
  *
  * Features supported by this driver:
  * Software PEC				no
@@ -240,6 +241,7 @@
 #define PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS	0xa223
 #define PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS	0xa2a3
 #define PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS		0xa323
+#define PCI_DEVICE_ID_INTEL_COMETLAKE_SMBUS		0x02a3
 
 struct i801_mux_config {
 	char *gpio_chip;
@@ -1038,6 +1040,7 @@ static const struct pci_device_id i801_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COMETLAKE_SMBUS) },
 	{ 0, }
 };
 
@@ -1534,6 +1537,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	case PCI_DEVICE_ID_INTEL_DNV_SMBUS:
 	case PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS:
 	case PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS:
+	case PCI_DEVICE_ID_INTEL_COMETLAKE_SMBUS:
 		priv->features |= FEATURE_I2C_BLOCK_READ;
 		priv->features |= FEATURE_IRQ;
 		priv->features |= FEATURE_SMBUS_PEC;