From a3f3332f412fe26fee186fb8abdcb4c8770dcd91 Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Wed, 12 Dec 2018 10:36:44 +0100 Subject: [PATCH] arm64: dts: marvell: add interrupt support to ap806 thermal node Add interrupt properties in the thermal node as well as a critical trip point in the thermal-zone. Signed-off-by: Miquel Raynal Acked-by: Eduardo Valentin Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi index 7d94c1fa592a..faca07de4d84 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi @@ -266,6 +266,8 @@ ap_thermal: thermal-sensor@80 { compatible = "marvell,armada-ap806-thermal"; reg = <0x80 0x10>; + interrupt-parent = <&sei>; + interrupts = <18>; #thermal-sensor-cells = <1>; }; }; @@ -276,16 +278,26 @@ * The thermal IP features one internal sensor plus, if applicable, one * remote channel wired to one sensor per CPU. * + * Only one thermal zone per AP/CP may trigger interrupts at a time, the + * first one that will have a critical trip point will be chosen. + * * The cooling maps are always empty as there are no cooling devices. */ thermal-zones { ap_thermal_ic: ap-thermal-ic { - polling-delay-passive = <1000>; - polling-delay = <1000>; + polling-delay-passive = <0>; /* Interrupt driven */ + polling-delay = <0>; /* Interrupt driven */ thermal-sensors = <&ap_thermal 0>; - trips { }; + trips { + ap_crit: ap-crit { + temperature = <100000>; /* mC degrees */ + hysteresis = <2000>; /* mC degrees */ + type = "critical"; + }; + }; + cooling-maps { }; }; -- GitLab