Merge branch 'for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata

Pull libata updates from Tejun Heo:
 "Nothing too interesting.

  The biggest change is refcnting fix for ata_host - the bug is recent
  and can only be triggered on controller hotplug, so very few are
  hitting it.

  There also are a number of trivial license / error message changes and
  some hardware specific changes"

* 'for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (23 commits)
  ahci: imx: add the imx8qm ahci sata support
  libata: ensure host is free'd on error exit paths
  ata: ahci-platform: add reset control support
  ahci: imx: fix the build warning
  ata: add Amiga Gayle PATA controller driver
  ahci: imx: add the imx6qp ahci sata support
  ata: change Tegra124 to Tegra
  ata: ahci_tegra: Add AHCI support for Tegra210
  ata: ahci_tegra: disable DIPM
  ata: ahci_tegra: disable devslp for Tegra124
  ata: ahci_tegra: initialize regulators from soc struct
  ata: ahci_tegra: Update initialization sequence
  dt-bindings: Tegra210: add binding documentation
  libata: add refcounting to ata_host
  pata_bk3710: clarify license version and use SPDX header
  pata_falcon: clarify license version and use SPDX header
  pata_it821x: Delete an error message for a failed memory allocation in it821x_firmware_command()
  pata_macio: Delete an error message for a failed memory allocation in two functions
  pata_mpc52xx: Delete an error message for a failed memory allocation in mpc52xx_ata_probe()
  sata_dwc_460ex: Delete an error message for a failed memory allocation in sata_dwc_port_start()
  ...

Documentation/devicetree/bindings/ata/ahci-platform.txt

@@ -30,6 +30,7 @@ compatible:
 Optional properties:
 - dma-coherent      : Present if dma operations are coherent
 - clocks            : a list of phandle + clock specifier pairs
+- resets            : a list of phandle + reset specifier pairs
 - target-supply     : regulator for SATA target power
 - phys              : reference to the SATA PHY node
 - phy-names         : must be "sata-phy"

Documentation/devicetree/bindings/ata/imx-sata.txt

@@ -7,6 +7,7 @@ Required properties:
 - compatible : should be one of the following:
    - "fsl,imx53-ahci" for i.MX53 SATA controller
    - "fsl,imx6q-ahci" for i.MX6Q SATA controller
+   - "fsl,imx6qp-ahci" for i.MX6QP SATA controller
 - interrupts : interrupt mapping for SATA IRQ
 - reg : registers mapping
 - clocks : list of clock specifiers, must contain an entry for each

Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt

-Tegra124 SoC SATA AHCI controller
+Tegra SoC SATA AHCI controller
 
 Required properties :
-- compatible : For Tegra124, must contain "nvidia,tegra124-ahci".  Otherwise,
-  must contain '"nvidia,<chip>-ahci", "nvidia,tegra124-ahci"', where <chip>
-  is tegra132.
+- compatible : Must be one of:
+  - Tegra124 : "nvidia,tegra124-ahci"
+  - Tegra132 : "nvidia,tegra132-ahci", "nvidia,tegra124-ahci"
+  - Tegra210 : "nvidia,tegra210-ahci"
 - reg : Should contain 2 entries:
   - AHCI register set (SATA BAR5)
   - SATA register set
@@ -13,8 +14,6 @@ Required properties :
 - clock-names : Must include the following entries:
   - sata
   - sata-oob
-  - cml1
-  - pll_e
 - resets : Must contain an entry for each entry in reset-names.
   See ../reset/reset.txt for details.
 - reset-names : Must include the following entries:
@@ -24,9 +23,22 @@ Required properties :
 - phys : Must contain an entry for each entry in phy-names.
   See ../phy/phy-bindings.txt for details.
 - phy-names : Must include the following entries:
+  - For Tegra124 and Tegra132:
     - sata-phy : XUSB PADCTL SATA PHY
-- hvdd-supply : Defines the SATA HVDD regulator
-- vddio-supply : Defines the SATA VDDIO regulator
-- avdd-supply : Defines the SATA AVDD regulator
-- target-5v-supply : Defines the SATA 5V power regulator
-- target-12v-supply : Defines the SATA 12V power regulator
+- For Tegra124 and Tegra132:
+  - hvdd-supply : Defines the SATA HVDD regulator
+  - vddio-supply : Defines the SATA VDDIO regulator
+  - avdd-supply : Defines the SATA AVDD regulator
+  - target-5v-supply : Defines the SATA 5V power regulator
+  - target-12v-supply : Defines the SATA 12V power regulator
+
+Optional properties:
+- reg :
+  - AUX register set
+- clock-names :
+  - cml1 :
+    cml1 clock should be defined here if the PHY driver
+    doesn't manage them. If it does, they should not be.
+- phy-names :
+  - For T210:
+    - sata-phy

drivers/ata/Kconfig

@@ -211,10 +211,10 @@ config AHCI_SUNXI
 	  If unsure, say N.
 
 config AHCI_TEGRA
-	tristate "NVIDIA Tegra124 AHCI SATA support"
+	tristate "NVIDIA Tegra AHCI SATA support"
 	depends on ARCH_TEGRA
 	help
-	  This option enables support for the NVIDIA Tegra124 SoC's
+	  This option enables support for the NVIDIA Tegra SoC's
 	  onboard AHCI SATA.
 
 	  If unsure, say N.
@@ -954,6 +954,18 @@ config PATA_FALCON
 
 	  If unsure, say N.
 
+config PATA_GAYLE
+	tristate "Amiga Gayle PATA support"
+	depends on M68K && AMIGA
+	help
+	  This option enables support for the on-board IDE
+	  interfaces on some Amiga models (A600, A1200,
+	  A4000 and A4000T) and also for IDE interfaces on
+	  the Zorro expansion bus (M-Tech E-Matrix 530
+	  expansion card).
+
+	  If unsure, say N.
+
 config PATA_ISAPNP
 	tristate "ISA Plug and Play PATA support"
 	depends on ISAPNP

drivers/ata/Makefile

@@ -97,6 +97,7 @@ obj-$(CONFIG_PATA_WINBOND)	+= pata_sl82c105.o
 # SFF PIO only
 obj-$(CONFIG_PATA_CMD640_PCI)	+= pata_cmd640.o
 obj-$(CONFIG_PATA_FALCON)	+= pata_falcon.o
+obj-$(CONFIG_PATA_GAYLE)	+= pata_gayle.o
 obj-$(CONFIG_PATA_ISAPNP)	+= pata_isapnp.o
 obj-$(CONFIG_PATA_IXP4XX_CF)	+= pata_ixp4xx_cf.o
 obj-$(CONFIG_PATA_MPIIX)	+= pata_mpiix.o

drivers/ata/ahci.h

@@ -350,6 +350,7 @@ struct ahci_host_priv {
 	u32			em_msg_type;	/* EM message type */
 	bool			got_runtime_pm; /* Did we do pm_runtime_get? */
 	struct clk		*clks[AHCI_MAX_CLKS]; /* Optional */
+	struct reset_control	*rsts;		/* Optional */
 	struct regulator	**target_pwrs;	/* Optional */
 	/*
 	 * If platform uses PHYs. There is a 1:1 relation between the port number and

drivers/ata/ahci_imx.c

@@ -23,6 +23,7 @@
 #include <linux/regmap.h>
 #include <linux/ahci_platform.h>
 #include <linux/of_device.h>
+#include <linux/of_gpio.h>
 #include <linux/mfd/syscon.h>
 #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
 #include <linux/libata.h>
@@ -53,11 +54,49 @@ enum {
 	/* Clock Reset Register */
 	IMX_CLOCK_RESET				= 0x7f3f,
 	IMX_CLOCK_RESET_RESET			= 1 << 0,
+	/* IMX8QM HSIO AHCI definitions */
+	IMX8QM_SATA_PHY_RX_IMPED_RATIO_OFFSET	= 0x03,
+	IMX8QM_SATA_PHY_TX_IMPED_RATIO_OFFSET	= 0x09,
+	IMX8QM_SATA_PHY_IMPED_RATIO_85OHM	= 0x6c,
+	IMX8QM_LPCG_PHYX2_OFFSET		= 0x00000,
+	IMX8QM_CSR_PHYX2_OFFSET			= 0x90000,
+	IMX8QM_CSR_PHYX1_OFFSET			= 0xa0000,
+	IMX8QM_CSR_PHYX_STTS0_OFFSET		= 0x4,
+	IMX8QM_CSR_PCIEA_OFFSET			= 0xb0000,
+	IMX8QM_CSR_PCIEB_OFFSET			= 0xc0000,
+	IMX8QM_CSR_SATA_OFFSET			= 0xd0000,
+	IMX8QM_CSR_PCIE_CTRL2_OFFSET		= 0x8,
+	IMX8QM_CSR_MISC_OFFSET			= 0xe0000,
+
+	IMX8QM_LPCG_PHYX2_PCLK0_MASK		= (0x3 << 16),
+	IMX8QM_LPCG_PHYX2_PCLK1_MASK		= (0x3 << 20),
+	IMX8QM_PHY_APB_RSTN_0			= BIT(0),
+	IMX8QM_PHY_MODE_SATA			= BIT(19),
+	IMX8QM_PHY_MODE_MASK			= (0xf << 17),
+	IMX8QM_PHY_PIPE_RSTN_0			= BIT(24),
+	IMX8QM_PHY_PIPE_RSTN_OVERRIDE_0		= BIT(25),
+	IMX8QM_PHY_PIPE_RSTN_1			= BIT(26),
+	IMX8QM_PHY_PIPE_RSTN_OVERRIDE_1		= BIT(27),
+	IMX8QM_STTS0_LANE0_TX_PLL_LOCK		= BIT(4),
+	IMX8QM_MISC_IOB_RXENA			= BIT(0),
+	IMX8QM_MISC_IOB_TXENA			= BIT(1),
+	IMX8QM_MISC_PHYX1_EPCS_SEL		= BIT(12),
+	IMX8QM_MISC_CLKREQN_OUT_OVERRIDE_1	= BIT(24),
+	IMX8QM_MISC_CLKREQN_OUT_OVERRIDE_0	= BIT(25),
+	IMX8QM_MISC_CLKREQN_IN_OVERRIDE_1	= BIT(28),
+	IMX8QM_MISC_CLKREQN_IN_OVERRIDE_0	= BIT(29),
+	IMX8QM_SATA_CTRL_RESET_N		= BIT(12),
+	IMX8QM_SATA_CTRL_EPCS_PHYRESET_N	= BIT(7),
+	IMX8QM_CTRL_BUTTON_RST_N		= BIT(21),
+	IMX8QM_CTRL_POWER_UP_RST_N		= BIT(23),
+	IMX8QM_CTRL_LTSSM_ENABLE		= BIT(4),
 };
 
 enum ahci_imx_type {
 	AHCI_IMX53,
 	AHCI_IMX6Q,
+	AHCI_IMX6QP,
+	AHCI_IMX8QM,
 };
 
 struct imx_ahci_priv {
@@ -66,10 +105,18 @@ struct imx_ahci_priv {
 	struct clk *sata_clk;
 	struct clk *sata_ref_clk;
 	struct clk *ahb_clk;
+	struct clk *epcs_tx_clk;
+	struct clk *epcs_rx_clk;
+	struct clk *phy_apbclk;
+	struct clk *phy_pclk0;
+	struct clk *phy_pclk1;
+	void __iomem *phy_base;
+	int clkreq_gpio;
 	struct regmap *gpr;
 	bool no_device;
 	bool first_time;
 	u32 phy_params;
+	u32 imped_ratio;
 };
 
 static int ahci_imx_hotplug;
@@ -188,11 +235,26 @@ static int imx_phy_reg_read(u16 *val, void __iomem *mmio)
 
 static int imx_sata_phy_reset(struct ahci_host_priv *hpriv)
 {
+	struct imx_ahci_priv *imxpriv = hpriv->plat_data;
 	void __iomem *mmio = hpriv->mmio;
 	int timeout = 10;
 	u16 val;
 	int ret;
 
+	if (imxpriv->type == AHCI_IMX6QP) {
+		/* 6qp adds the sata reset mechanism, use it for 6qp sata */
+		regmap_update_bits(imxpriv->gpr, IOMUXC_GPR5,
+				   IMX6Q_GPR5_SATA_SW_PD, 0);
+
+		regmap_update_bits(imxpriv->gpr, IOMUXC_GPR5,
+				   IMX6Q_GPR5_SATA_SW_RST, 0);
+		udelay(50);
+		regmap_update_bits(imxpriv->gpr, IOMUXC_GPR5,
+				   IMX6Q_GPR5_SATA_SW_RST,
+				   IMX6Q_GPR5_SATA_SW_RST);
+		return 0;
+	}
+
 	/* Reset SATA PHY by setting RESET bit of PHY register CLOCK_RESET */
 	ret = imx_phy_reg_addressing(IMX_CLOCK_RESET, mmio);
 	if (ret)
@@ -391,6 +453,207 @@ static struct attribute *fsl_sata_ahci_attrs[] = {
 };
 ATTRIBUTE_GROUPS(fsl_sata_ahci);
 
+static int imx8_sata_enable(struct ahci_host_priv *hpriv)
+{
+	u32 val, reg;
+	int i, ret;
+	struct imx_ahci_priv *imxpriv = hpriv->plat_data;
+	struct device *dev = &imxpriv->ahci_pdev->dev;
+
+	/* configure the hsio for sata */
+	ret = clk_prepare_enable(imxpriv->phy_pclk0);
+	if (ret < 0) {
+		dev_err(dev, "can't enable phy_pclk0.\n");
+		return ret;
+	}
+	ret = clk_prepare_enable(imxpriv->phy_pclk1);
+	if (ret < 0) {
+		dev_err(dev, "can't enable phy_pclk1.\n");
+		goto disable_phy_pclk0;
+	}
+	ret = clk_prepare_enable(imxpriv->epcs_tx_clk);
+	if (ret < 0) {
+		dev_err(dev, "can't enable epcs_tx_clk.\n");
+		goto disable_phy_pclk1;
+	}
+	ret = clk_prepare_enable(imxpriv->epcs_rx_clk);
+	if (ret < 0) {
+		dev_err(dev, "can't enable epcs_rx_clk.\n");
+		goto disable_epcs_tx_clk;
+	}
+	ret = clk_prepare_enable(imxpriv->phy_apbclk);
+	if (ret < 0) {
+		dev_err(dev, "can't enable phy_apbclk.\n");
+		goto disable_epcs_rx_clk;
+	}
+	/* Configure PHYx2 PIPE_RSTN */
+	regmap_read(imxpriv->gpr, IMX8QM_CSR_PCIEA_OFFSET +
+			IMX8QM_CSR_PCIE_CTRL2_OFFSET, &val);
+	if ((val & IMX8QM_CTRL_LTSSM_ENABLE) == 0) {
+		/* The link of the PCIEA of HSIO is down */
+		regmap_update_bits(imxpriv->gpr,
+				IMX8QM_CSR_PHYX2_OFFSET,
+				IMX8QM_PHY_PIPE_RSTN_0 |
+				IMX8QM_PHY_PIPE_RSTN_OVERRIDE_0,
+				IMX8QM_PHY_PIPE_RSTN_0 |
+				IMX8QM_PHY_PIPE_RSTN_OVERRIDE_0);
+	}
+	regmap_read(imxpriv->gpr, IMX8QM_CSR_PCIEB_OFFSET +
+			IMX8QM_CSR_PCIE_CTRL2_OFFSET, &reg);
+	if ((reg & IMX8QM_CTRL_LTSSM_ENABLE) == 0) {
+		/* The link of the PCIEB of HSIO is down */
+		regmap_update_bits(imxpriv->gpr,
+				IMX8QM_CSR_PHYX2_OFFSET,
+				IMX8QM_PHY_PIPE_RSTN_1 |
+				IMX8QM_PHY_PIPE_RSTN_OVERRIDE_1,
+				IMX8QM_PHY_PIPE_RSTN_1 |
+				IMX8QM_PHY_PIPE_RSTN_OVERRIDE_1);
+	}
+	if (((reg | val) & IMX8QM_CTRL_LTSSM_ENABLE) == 0) {
+		/* The links of both PCIA and PCIEB of HSIO are down */
+		regmap_update_bits(imxpriv->gpr,
+				IMX8QM_LPCG_PHYX2_OFFSET,
+				IMX8QM_LPCG_PHYX2_PCLK0_MASK |
+				IMX8QM_LPCG_PHYX2_PCLK1_MASK,
+				0);
+	}
+
+	/* set PWR_RST and BT_RST of csr_pciea */
+	val = IMX8QM_CSR_PCIEA_OFFSET + IMX8QM_CSR_PCIE_CTRL2_OFFSET;
+	regmap_update_bits(imxpriv->gpr,
+			val,
+			IMX8QM_CTRL_BUTTON_RST_N,
+			IMX8QM_CTRL_BUTTON_RST_N);
+	regmap_update_bits(imxpriv->gpr,
+			val,
+			IMX8QM_CTRL_POWER_UP_RST_N,
+			IMX8QM_CTRL_POWER_UP_RST_N);
+
+	/* PHYX1_MODE to SATA */
+	regmap_update_bits(imxpriv->gpr,
+			IMX8QM_CSR_PHYX1_OFFSET,
+			IMX8QM_PHY_MODE_MASK,
+			IMX8QM_PHY_MODE_SATA);
+
+	/*
+	 * BIT0 RXENA 1, BIT1 TXENA 0
+	 * BIT12 PHY_X1_EPCS_SEL 1.
+	 */
+	regmap_update_bits(imxpriv->gpr,
+			IMX8QM_CSR_MISC_OFFSET,
+			IMX8QM_MISC_IOB_RXENA,
+			IMX8QM_MISC_IOB_RXENA);
+	regmap_update_bits(imxpriv->gpr,
+			IMX8QM_CSR_MISC_OFFSET,
+			IMX8QM_MISC_IOB_TXENA,
+			0);
+	regmap_update_bits(imxpriv->gpr,
+			IMX8QM_CSR_MISC_OFFSET,
+			IMX8QM_MISC_PHYX1_EPCS_SEL,
+			IMX8QM_MISC_PHYX1_EPCS_SEL);
+	/*
+	 * It is possible, for PCIe and SATA are sharing
+	 * the same clock source, HPLL or external oscillator.
+	 * When PCIe is in low power modes (L1.X or L2 etc),
+	 * the clock source can be turned off. In this case,
+	 * if this clock source is required to be toggling by
+	 * SATA, then SATA functions will be abnormal.
+	 * Set the override here to avoid it.
+	 */
+	regmap_update_bits(imxpriv->gpr,
+			IMX8QM_CSR_MISC_OFFSET,
+			IMX8QM_MISC_CLKREQN_OUT_OVERRIDE_1 |
+			IMX8QM_MISC_CLKREQN_OUT_OVERRIDE_0 |
+			IMX8QM_MISC_CLKREQN_IN_OVERRIDE_1 |
+			IMX8QM_MISC_CLKREQN_IN_OVERRIDE_0,
+			IMX8QM_MISC_CLKREQN_OUT_OVERRIDE_1 |
+			IMX8QM_MISC_CLKREQN_OUT_OVERRIDE_0 |
+			IMX8QM_MISC_CLKREQN_IN_OVERRIDE_1 |
+			IMX8QM_MISC_CLKREQN_IN_OVERRIDE_0);
+
+	/* clear PHY RST, then set it */
+	regmap_update_bits(imxpriv->gpr,
+			IMX8QM_CSR_SATA_OFFSET,
+			IMX8QM_SATA_CTRL_EPCS_PHYRESET_N,
+			0);
+
+	regmap_update_bits(imxpriv->gpr,
+			IMX8QM_CSR_SATA_OFFSET,
+			IMX8QM_SATA_CTRL_EPCS_PHYRESET_N,
+			IMX8QM_SATA_CTRL_EPCS_PHYRESET_N);
+
+	/* CTRL RST: SET -> delay 1 us -> CLEAR -> SET */
+	regmap_update_bits(imxpriv->gpr,
+			IMX8QM_CSR_SATA_OFFSET,
+			IMX8QM_SATA_CTRL_RESET_N,
+			IMX8QM_SATA_CTRL_RESET_N);
+	udelay(1);
+	regmap_update_bits(imxpriv->gpr,
+			IMX8QM_CSR_SATA_OFFSET,
+			IMX8QM_SATA_CTRL_RESET_N,
+			0);
+	regmap_update_bits(imxpriv->gpr,
+			IMX8QM_CSR_SATA_OFFSET,
+			IMX8QM_SATA_CTRL_RESET_N,
+			IMX8QM_SATA_CTRL_RESET_N);
+
+	/* APB reset */
+	regmap_update_bits(imxpriv->gpr,
+			IMX8QM_CSR_PHYX1_OFFSET,
+			IMX8QM_PHY_APB_RSTN_0,
+			IMX8QM_PHY_APB_RSTN_0);
+
+	for (i = 0; i < 100; i++) {
+		reg = IMX8QM_CSR_PHYX1_OFFSET +
+			IMX8QM_CSR_PHYX_STTS0_OFFSET;
+		regmap_read(imxpriv->gpr, reg, &val);
+		val &= IMX8QM_STTS0_LANE0_TX_PLL_LOCK;
+		if (val == IMX8QM_STTS0_LANE0_TX_PLL_LOCK)
+			break;
+		udelay(1);
+	}
+
+	if (val != IMX8QM_STTS0_LANE0_TX_PLL_LOCK) {
+		dev_err(dev, "TX PLL of the PHY is not locked\n");
+		ret = -ENODEV;
+	} else {
+		writeb(imxpriv->imped_ratio, imxpriv->phy_base +
+				IMX8QM_SATA_PHY_RX_IMPED_RATIO_OFFSET);
+		writeb(imxpriv->imped_ratio, imxpriv->phy_base +
+				IMX8QM_SATA_PHY_TX_IMPED_RATIO_OFFSET);
+		reg = readb(imxpriv->phy_base +
+				IMX8QM_SATA_PHY_RX_IMPED_RATIO_OFFSET);
+		if (unlikely(reg != imxpriv->imped_ratio))
+			dev_info(dev, "Can't set PHY RX impedance ratio.\n");
+		reg = readb(imxpriv->phy_base +
+				IMX8QM_SATA_PHY_TX_IMPED_RATIO_OFFSET);
+		if (unlikely(reg != imxpriv->imped_ratio))
+			dev_info(dev, "Can't set PHY TX impedance ratio.\n");
+		usleep_range(50, 100);
+
+		/*
+		 * To reduce the power consumption, gate off
+		 * the PHY clks
+		 */
+		clk_disable_unprepare(imxpriv->phy_apbclk);
+		clk_disable_unprepare(imxpriv->phy_pclk1);
+		clk_disable_unprepare(imxpriv->phy_pclk0);
+		return ret;
+	}
+
+	clk_disable_unprepare(imxpriv->phy_apbclk);
+disable_epcs_rx_clk:
+	clk_disable_unprepare(imxpriv->epcs_rx_clk);
+disable_epcs_tx_clk:
+	clk_disable_unprepare(imxpriv->epcs_tx_clk);
+disable_phy_pclk1:
+	clk_disable_unprepare(imxpriv->phy_pclk1);
+disable_phy_pclk0:
+	clk_disable_unprepare(imxpriv->phy_pclk0);
+
+	return ret;
+}
+
 static int imx_sata_enable(struct ahci_host_priv *hpriv)
 {
 	struct imx_ahci_priv *imxpriv = hpriv->plat_data;
@@ -408,7 +671,7 @@ static int imx_sata_enable(struct ahci_host_priv *hpriv)
 	if (ret < 0)
 		goto disable_regulator;
 
-	if (imxpriv->type == AHCI_IMX6Q) {
+	if (imxpriv->type == AHCI_IMX6Q || imxpriv->type == AHCI_IMX6QP) {
 		/*
 		 * set PHY Paremeters, two steps to configure the GPR13,
 		 * one write for rest of parameters, mask of first write
@@ -438,6 +701,8 @@ static int imx_sata_enable(struct ahci_host_priv *hpriv)
 			dev_err(dev, "failed to reset phy: %d\n", ret);
 			goto disable_clk;
 		}
+	} else if (imxpriv->type == AHCI_IMX8QM) {
+		ret = imx8_sata_enable(hpriv);
 	}
 
 	usleep_range(1000, 2000);
@@ -459,10 +724,29 @@ static void imx_sata_disable(struct ahci_host_priv *hpriv)
 	if (imxpriv->no_device)
 		return;
 
-	if (imxpriv->type == AHCI_IMX6Q) {
+	switch (imxpriv->type) {
+	case AHCI_IMX6QP:
+		regmap_update_bits(imxpriv->gpr, IOMUXC_GPR5,
+				   IMX6Q_GPR5_SATA_SW_PD,
+				   IMX6Q_GPR5_SATA_SW_PD);
+		regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13,
+				   IMX6Q_GPR13_SATA_MPLL_CLK_EN,
+				   !IMX6Q_GPR13_SATA_MPLL_CLK_EN);
+		break;
+
+	case AHCI_IMX6Q:
 		regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13,
 				   IMX6Q_GPR13_SATA_MPLL_CLK_EN,
 				   !IMX6Q_GPR13_SATA_MPLL_CLK_EN);
+		break;
+
+	case AHCI_IMX8QM:
+		clk_disable_unprepare(imxpriv->epcs_rx_clk);
+		clk_disable_unprepare(imxpriv->epcs_tx_clk);
+		break;
+
+	default:
+		break;
 	}
 
 	clk_disable_unprepare(imxpriv->sata_ref_clk);
@@ -513,7 +797,7 @@ static int ahci_imx_softreset(struct ata_link *link, unsigned int *class,
 
 	if (imxpriv->type == AHCI_IMX53)
 		ret = ahci_pmp_retry_srst_ops.softreset(link, class, deadline);
-	else if (imxpriv->type == AHCI_IMX6Q)
+	else
 		ret = ahci_ops.softreset(link, class, deadline);
 
 	return ret;
@@ -536,6 +820,8 @@ static const struct ata_port_info ahci_imx_port_info = {
 static const struct of_device_id imx_ahci_of_match[] = {
 	{ .compatible = "fsl,imx53-ahci", .data = (void *)AHCI_IMX53 },
 	{ .compatible = "fsl,imx6q-ahci", .data = (void *)AHCI_IMX6Q },
+	{ .compatible = "fsl,imx6qp-ahci", .data = (void *)AHCI_IMX6QP },
+	{ .compatible = "fsl,imx8qm-ahci", .data = (void *)AHCI_IMX8QM },
 	{},
 };
 MODULE_DEVICE_TABLE(of, imx_ahci_of_match);
@@ -703,6 +989,79 @@ static struct scsi_host_template ahci_platform_sht = {
 	AHCI_SHT(DRV_NAME),
 };
 
+static int imx8_sata_probe(struct device *dev, struct imx_ahci_priv *imxpriv)
+{
+	int ret;
+	struct resource *phy_res;
+	struct platform_device *pdev = imxpriv->ahci_pdev;
+	struct device_node *np = dev->of_node;
+
+	if (of_property_read_u32(np, "fsl,phy-imp", &imxpriv->imped_ratio))
+		imxpriv->imped_ratio = IMX8QM_SATA_PHY_IMPED_RATIO_85OHM;
+	phy_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy");
+	if (phy_res) {
+		imxpriv->phy_base = devm_ioremap(dev, phy_res->start,
+					resource_size(phy_res));
+		if (!imxpriv->phy_base) {
+			dev_err(dev, "error with ioremap\n");
+			return -ENOMEM;
+		}
+	} else {
+		dev_err(dev, "missing *phy* reg region.\n");
+		return -ENOMEM;
+	}
+	imxpriv->gpr =
+		 syscon_regmap_lookup_by_phandle(np, "hsio");
+	if (IS_ERR(imxpriv->gpr)) {
+		dev_err(dev, "unable to find gpr registers\n");
+		return PTR_ERR(imxpriv->gpr);
+	}
+
+	imxpriv->epcs_tx_clk = devm_clk_get(dev, "epcs_tx");
+	if (IS_ERR(imxpriv->epcs_tx_clk)) {
+		dev_err(dev, "can't get epcs_tx_clk clock.\n");
+		return PTR_ERR(imxpriv->epcs_tx_clk);
+	}
+	imxpriv->epcs_rx_clk = devm_clk_get(dev, "epcs_rx");
+	if (IS_ERR(imxpriv->epcs_rx_clk)) {
+		dev_err(dev, "can't get epcs_rx_clk clock.\n");
+		return PTR_ERR(imxpriv->epcs_rx_clk);
+	}
+	imxpriv->phy_pclk0 = devm_clk_get(dev, "phy_pclk0");
+	if (IS_ERR(imxpriv->phy_pclk0)) {
+		dev_err(dev, "can't get phy_pclk0 clock.\n");
+		return PTR_ERR(imxpriv->phy_pclk0);
+	}
+	imxpriv->phy_pclk1 = devm_clk_get(dev, "phy_pclk1");
+	if (IS_ERR(imxpriv->phy_pclk1)) {
+		dev_err(dev, "can't get phy_pclk1 clock.\n");
+		return PTR_ERR(imxpriv->phy_pclk1);
+	}
+	imxpriv->phy_apbclk = devm_clk_get(dev, "phy_apbclk");
+	if (IS_ERR(imxpriv->phy_apbclk)) {
+		dev_err(dev, "can't get phy_apbclk clock.\n");
+		return PTR_ERR(imxpriv->phy_apbclk);
+	}
+
+	/* Fetch GPIO, then enable the external OSC */
+	imxpriv->clkreq_gpio = of_get_named_gpio(np, "clkreq-gpio", 0);
+	if (gpio_is_valid(imxpriv->clkreq_gpio)) {
+		ret = devm_gpio_request_one(dev, imxpriv->clkreq_gpio,
+					    GPIOF_OUT_INIT_LOW,
+					    "SATA CLKREQ");
+		if (ret == -EBUSY) {
+			dev_info(dev, "clkreq had been initialized.\n");
+		} else if (ret) {
+			dev_err(dev, "%d unable to get clkreq.\n", ret);
+			return ret;
+		}
+	} else if (imxpriv->clkreq_gpio == -EPROBE_DEFER) {
+		return imxpriv->clkreq_gpio;
+	}
+
+	return 0;
+}
+
 static int imx_ahci_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -743,7 +1102,7 @@ static int imx_ahci_probe(struct platform_device *pdev)
 		return PTR_ERR(imxpriv->ahb_clk);
 	}
 
-	if (imxpriv->type == AHCI_IMX6Q) {
+	if (imxpriv->type == AHCI_IMX6Q || imxpriv->type == AHCI_IMX6QP) {
 		u32 reg_value;
 
 		imxpriv->gpr = syscon_regmap_lookup_by_compatible(
@@ -762,6 +1121,10 @@ static int imx_ahci_probe(struct platform_device *pdev)
 				   IMX6Q_GPR13_SATA_RX_DPLL_MODE_2P_4F |
 				   IMX6Q_GPR13_SATA_SPD_MODE_3P0G |
 				   reg_value;
+	} else if (imxpriv->type == AHCI_IMX8QM) {
+		ret =  imx8_sata_probe(dev, imxpriv);
+		if (ret)
+			return ret;
 	}
 
 	hpriv = ahci_platform_get_resources(pdev);

drivers/ata/ahci_tegra.c

@@ -34,7 +34,8 @@
 #define DRV_NAME "tegra-ahci"
 
 #define SATA_CONFIGURATION_0				0x180
-#define SATA_CONFIGURATION_EN_FPCI			BIT(0)
+#define SATA_CONFIGURATION_0_EN_FPCI			BIT(0)
+#define SATA_CONFIGURATION_0_CLK_OVERRIDE			BIT(31)
 
 #define SCFG_OFFSET					0x1000
 
@@ -45,17 +46,55 @@
 #define T_SATA0_CFG_1_SERR				BIT(8)
 
 #define T_SATA0_CFG_9					0x24
-#define T_SATA0_CFG_9_BASE_ADDRESS_SHIFT		13
+#define T_SATA0_CFG_9_BASE_ADDRESS			0x40020000
 
 #define SATA_FPCI_BAR5					0x94
-#define SATA_FPCI_BAR5_START_SHIFT			4
+#define SATA_FPCI_BAR5_START_MASK			(0xfffffff << 4)
+#define SATA_FPCI_BAR5_START				(0x0040020 << 4)
+#define SATA_FPCI_BAR5_ACCESS_TYPE			(0x1)
 
 #define SATA_INTR_MASK					0x188
 #define SATA_INTR_MASK_IP_INT_MASK			BIT(16)
 
+#define T_SATA0_CFG_35					0x94
+#define T_SATA0_CFG_35_IDP_INDEX_MASK			(0x7ff << 2)
+#define T_SATA0_CFG_35_IDP_INDEX			(0x2a << 2)
+
+#define T_SATA0_AHCI_IDP1				0x98
+#define T_SATA0_AHCI_IDP1_DATA				(0x400040)
+
+#define T_SATA0_CFG_PHY_1				0x12c
+#define T_SATA0_CFG_PHY_1_PADS_IDDQ_EN			BIT(23)
+#define T_SATA0_CFG_PHY_1_PAD_PLL_IDDQ_EN		BIT(22)
+
+#define T_SATA0_NVOOB                                   0x114
+#define T_SATA0_NVOOB_COMMA_CNT_MASK                    (0xff << 16)
+#define T_SATA0_NVOOB_COMMA_CNT                         (0x07 << 16)
+#define T_SATA0_NVOOB_SQUELCH_FILTER_MODE_MASK          (0x3 << 24)
+#define T_SATA0_NVOOB_SQUELCH_FILTER_MODE               (0x1 << 24)
+#define T_SATA0_NVOOB_SQUELCH_FILTER_LENGTH_MASK        (0x3 << 26)
+#define T_SATA0_NVOOB_SQUELCH_FILTER_LENGTH             (0x3 << 26)
+
+#define T_SATA_CFG_PHY_0                                0x120
+#define T_SATA_CFG_PHY_0_USE_7BIT_ALIGN_DET_FOR_SPD     BIT(11)
+#define T_SATA_CFG_PHY_0_MASK_SQUELCH                   BIT(24)
+
+#define T_SATA0_CFG2NVOOB_2				0x134
+#define T_SATA0_CFG2NVOOB_2_COMWAKE_IDLE_CNT_LOW_MASK	(0x1ff << 18)
+#define T_SATA0_CFG2NVOOB_2_COMWAKE_IDLE_CNT_LOW	(0xc << 18)
+
 #define T_SATA0_AHCI_HBA_CAP_BKDR			0x300
+#define T_SATA0_AHCI_HBA_CAP_BKDR_PARTIAL_ST_CAP	BIT(13)
+#define T_SATA0_AHCI_HBA_CAP_BKDR_SLUMBER_ST_CAP	BIT(14)
+#define T_SATA0_AHCI_HBA_CAP_BKDR_SALP			BIT(26)
+#define T_SATA0_AHCI_HBA_CAP_BKDR_SUPP_PM		BIT(17)
+#define T_SATA0_AHCI_HBA_CAP_BKDR_SNCQ			BIT(30)
 
 #define T_SATA0_BKDOOR_CC				0x4a4
+#define T_SATA0_BKDOOR_CC_CLASS_CODE_MASK		(0xffff << 16)
+#define T_SATA0_BKDOOR_CC_CLASS_CODE			(0x0106 << 16)
+#define T_SATA0_BKDOOR_CC_PROG_IF_MASK			(0xff << 8)
+#define T_SATA0_BKDOOR_CC_PROG_IF			(0x01 << 8)
 
 #define T_SATA0_CFG_SATA				0x54c
 #define T_SATA0_CFG_SATA_BACKDOOR_PROG_IF_EN		BIT(12)
@@ -82,6 +121,27 @@
 #define T_SATA0_CHX_PHY_CTRL11				0x6d0
 #define T_SATA0_CHX_PHY_CTRL11_GEN2_RX_EQ		(0x2800 << 16)
 
+#define T_SATA0_CHX_PHY_CTRL17_0			0x6e8
+#define T_SATA0_CHX_PHY_CTRL17_0_RX_EQ_CTRL_L_GEN1	0x55010000
+#define T_SATA0_CHX_PHY_CTRL18_0			0x6ec
+#define T_SATA0_CHX_PHY_CTRL18_0_RX_EQ_CTRL_L_GEN2	0x55010000
+#define T_SATA0_CHX_PHY_CTRL20_0			0x6f4
+#define T_SATA0_CHX_PHY_CTRL20_0_RX_EQ_CTRL_H_GEN1	0x1
+#define T_SATA0_CHX_PHY_CTRL21_0			0x6f8
+#define T_SATA0_CHX_PHY_CTRL21_0_RX_EQ_CTRL_H_GEN2	0x1
+
+/* AUX Registers */
+#define SATA_AUX_MISC_CNTL_1_0				0x8
+#define SATA_AUX_MISC_CNTL_1_0_DEVSLP_OVERRIDE		BIT(17)
+#define SATA_AUX_MISC_CNTL_1_0_SDS_SUPPORT		BIT(13)
+#define SATA_AUX_MISC_CNTL_1_0_DESO_SUPPORT		BIT(15)
+
+#define SATA_AUX_RX_STAT_INT_0				0xc
+#define SATA_AUX_RX_STAT_INT_0_SATA_DEVSLP		BIT(7)
+
+#define SATA_AUX_SPARE_CFG0_0				0x18
+#define SATA_AUX_SPARE_CFG0_0_MDAT_TIMER_AFTER_PG_VALID	BIT(14)
+
 #define FUSE_SATA_CALIB					0x124
 #define FUSE_SATA_CALIB_MASK				0x3
 
@@ -99,23 +159,92 @@ static const struct sata_pad_calibration tegra124_pad_calibration[] = {
 	{0x14, 0x0e, 0x1a, 0x0e},
 };
 
+struct tegra_ahci_ops {
+	int (*init)(struct ahci_host_priv *hpriv);
+};
+
+struct tegra_ahci_soc {
+	const char *const		*supply_names;
+	u32				num_supplies;
+	bool				supports_devslp;
+	const struct tegra_ahci_ops	*ops;
+};
+
 struct tegra_ahci_priv {
 	struct platform_device	   *pdev;
 	void __iomem		   *sata_regs;
+	void __iomem		   *sata_aux_regs;
 	struct reset_control	   *sata_rst;
 	struct reset_control	   *sata_oob_rst;
 	struct reset_control	   *sata_cold_rst;
 	/* Needs special handling, cannot use ahci_platform */
 	struct clk		   *sata_clk;
-	struct regulator_bulk_data supplies[5];
+	struct regulator_bulk_data *supplies;
+	const struct tegra_ahci_soc *soc;
 };
 
+static void tegra_ahci_handle_quirks(struct ahci_host_priv *hpriv)
+{
+	struct tegra_ahci_priv *tegra = hpriv->plat_data;
+	u32 val;
+
+	if (tegra->sata_aux_regs && !tegra->soc->supports_devslp) {
+		val = readl(tegra->sata_aux_regs + SATA_AUX_MISC_CNTL_1_0);
+		val &= ~SATA_AUX_MISC_CNTL_1_0_SDS_SUPPORT;
+		writel(val, tegra->sata_aux_regs + SATA_AUX_MISC_CNTL_1_0);
+	}
+}
+
+static int tegra124_ahci_init(struct ahci_host_priv *hpriv)
+{
+	struct tegra_ahci_priv *tegra = hpriv->plat_data;
+	struct sata_pad_calibration calib;
+	int ret;
+	u32 val;
+
+	/* Pad calibration */
+	ret = tegra_fuse_readl(FUSE_SATA_CALIB, &val);
+	if (ret)
+		return ret;
+
+	calib = tegra124_pad_calibration[val & FUSE_SATA_CALIB_MASK];
+
+	writel(BIT(0), tegra->sata_regs + SCFG_OFFSET + T_SATA0_INDEX);
+
+	val = readl(tegra->sata_regs +
+		    SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL1_GEN1);
+	val &= ~T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_MASK;
+	val &= ~T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_MASK;
+	val |= calib.gen1_tx_amp << T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_SHIFT;
+	val |= calib.gen1_tx_peak << T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_SHIFT;
+	writel(val, tegra->sata_regs + SCFG_OFFSET +
+	       T_SATA0_CHX_PHY_CTRL1_GEN1);
+
+	val = readl(tegra->sata_regs +
+		    SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL1_GEN2);
+	val &= ~T_SATA0_CHX_PHY_CTRL1_GEN2_TX_AMP_MASK;
+	val &= ~T_SATA0_CHX_PHY_CTRL1_GEN2_TX_PEAK_MASK;
+	val |= calib.gen2_tx_amp << T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_SHIFT;
+	val |= calib.gen2_tx_peak << T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_SHIFT;
+	writel(val, tegra->sata_regs + SCFG_OFFSET +
+	       T_SATA0_CHX_PHY_CTRL1_GEN2);
+
+	writel(T_SATA0_CHX_PHY_CTRL11_GEN2_RX_EQ,
+	       tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL11);
+	writel(T_SATA0_CHX_PHY_CTRL2_CDR_CNTL_GEN1,
+	       tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL2);
+
+	writel(0, tegra->sata_regs + SCFG_OFFSET + T_SATA0_INDEX);
+
+	return 0;
+}
+
 static int tegra_ahci_power_on(struct ahci_host_priv *hpriv)
 {
 	struct tegra_ahci_priv *tegra = hpriv->plat_data;
 	int ret;
 
-	ret = regulator_bulk_enable(ARRAY_SIZE(tegra->supplies),
+	ret = regulator_bulk_enable(tegra->soc->num_supplies,
 				    tegra->supplies);
 	if (ret)
 		return ret;
@@ -144,7 +273,7 @@ static int tegra_ahci_power_on(struct ahci_host_priv *hpriv)
 	tegra_powergate_power_off(TEGRA_POWERGATE_SATA);
 
 disable_regulators:
-	regulator_bulk_disable(ARRAY_SIZE(tegra->supplies), tegra->supplies);
+	regulator_bulk_disable(tegra->soc->num_supplies, tegra->supplies);
 
 	return ret;
 }
@@ -162,15 +291,14 @@ static void tegra_ahci_power_off(struct ahci_host_priv *hpriv)
 	clk_disable_unprepare(tegra->sata_clk);
 	tegra_powergate_power_off(TEGRA_POWERGATE_SATA);
 
-	regulator_bulk_disable(ARRAY_SIZE(tegra->supplies), tegra->supplies);
+	regulator_bulk_disable(tegra->soc->num_supplies, tegra->supplies);
 }
 
 static int tegra_ahci_controller_init(struct ahci_host_priv *hpriv)
 {
 	struct tegra_ahci_priv *tegra = hpriv->plat_data;
 	int ret;
-	unsigned int val;
-	struct sata_pad_calibration calib;
+	u32 val;
 
 	ret = tegra_ahci_power_on(hpriv);
 	if (ret) {
@@ -179,78 +307,115 @@ static int tegra_ahci_controller_init(struct ahci_host_priv *hpriv)
 		return ret;
 	}
 
+	/*
+	 * Program the following SATA IPFS registers to allow SW accesses to
+	 * SATA's MMIO register range.
+	 */
+	val = readl(tegra->sata_regs + SATA_FPCI_BAR5);
+	val &= ~(SATA_FPCI_BAR5_START_MASK | SATA_FPCI_BAR5_ACCESS_TYPE);
+	val |= SATA_FPCI_BAR5_START | SATA_FPCI_BAR5_ACCESS_TYPE;
+	writel(val, tegra->sata_regs + SATA_FPCI_BAR5);
+
+	/* Program the following SATA IPFS register to enable the SATA */
 	val = readl(tegra->sata_regs + SATA_CONFIGURATION_0);
-	val |= SATA_CONFIGURATION_EN_FPCI;
+	val |= SATA_CONFIGURATION_0_EN_FPCI;
 	writel(val, tegra->sata_regs + SATA_CONFIGURATION_0);
 
-	/* Pad calibration */
-
-	ret = tegra_fuse_readl(FUSE_SATA_CALIB, &val);
-	if (ret) {
-		dev_err(&tegra->pdev->dev,
-			"failed to read calibration fuse: %d\n", ret);
-		return ret;
-	}
-
-	calib = tegra124_pad_calibration[val & FUSE_SATA_CALIB_MASK];
-
-	writel(BIT(0), tegra->sata_regs + SCFG_OFFSET + T_SATA0_INDEX);
-
-	val = readl(tegra->sata_regs +
-		SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL1_GEN1);
-	val &= ~T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_MASK;
-	val &= ~T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_MASK;
-	val |= calib.gen1_tx_amp <<
-			T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_SHIFT;
-	val |= calib.gen1_tx_peak <<
-			T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_SHIFT;
-	writel(val, tegra->sata_regs + SCFG_OFFSET +
-		T_SATA0_CHX_PHY_CTRL1_GEN1);
-
-	val = readl(tegra->sata_regs +
-			SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL1_GEN2);
-	val &= ~T_SATA0_CHX_PHY_CTRL1_GEN2_TX_AMP_MASK;
-	val &= ~T_SATA0_CHX_PHY_CTRL1_GEN2_TX_PEAK_MASK;
-	val |= calib.gen2_tx_amp <<
-			T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_SHIFT;
-	val |= calib.gen2_tx_peak <<
-			T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_SHIFT;
-	writel(val, tegra->sata_regs + SCFG_OFFSET +
-		T_SATA0_CHX_PHY_CTRL1_GEN2);
-
-	writel(T_SATA0_CHX_PHY_CTRL11_GEN2_RX_EQ,
-		tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL11);
-	writel(T_SATA0_CHX_PHY_CTRL2_CDR_CNTL_GEN1,
-		tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL2);
+	/* Electrical settings for better link stability */
+	val = T_SATA0_CHX_PHY_CTRL17_0_RX_EQ_CTRL_L_GEN1;
+	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL17_0);
+	val = T_SATA0_CHX_PHY_CTRL18_0_RX_EQ_CTRL_L_GEN2;
+	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL18_0);
+	val = T_SATA0_CHX_PHY_CTRL20_0_RX_EQ_CTRL_H_GEN1;
+	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL20_0);
+	val = T_SATA0_CHX_PHY_CTRL21_0_RX_EQ_CTRL_H_GEN2;
+	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL21_0);
+
+	/* For SQUELCH Filter & Gen3 drive getting detected as Gen1 drive */
+
+	val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA_CFG_PHY_0);
+	val |= T_SATA_CFG_PHY_0_MASK_SQUELCH;
+	val &= ~T_SATA_CFG_PHY_0_USE_7BIT_ALIGN_DET_FOR_SPD;
+	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA_CFG_PHY_0);
+
+	val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_NVOOB);
+	val &= ~(T_SATA0_NVOOB_COMMA_CNT_MASK |
+		 T_SATA0_NVOOB_SQUELCH_FILTER_LENGTH_MASK |
+		 T_SATA0_NVOOB_SQUELCH_FILTER_MODE_MASK);
+	val |= (T_SATA0_NVOOB_COMMA_CNT |
+		T_SATA0_NVOOB_SQUELCH_FILTER_LENGTH |
+		T_SATA0_NVOOB_SQUELCH_FILTER_MODE);
+	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_NVOOB);
+
+	/*
+	 * Change CFG2NVOOB_2_COMWAKE_IDLE_CNT_LOW from 83.3 ns to 58.8ns
+	 */
+	val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG2NVOOB_2);
+	val &= ~T_SATA0_CFG2NVOOB_2_COMWAKE_IDLE_CNT_LOW_MASK;
+	val |= T_SATA0_CFG2NVOOB_2_COMWAKE_IDLE_CNT_LOW;
+	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG2NVOOB_2);
 
-	writel(0, tegra->sata_regs + SCFG_OFFSET + T_SATA0_INDEX);
+	if (tegra->soc->ops && tegra->soc->ops->init)
+		tegra->soc->ops->init(hpriv);
 
-	/* Program controller device ID */
+	/*
+	 * Program the following SATA configuration registers to
+	 * initialize SATA
+	 */
+	val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_1);
+	val |= (T_SATA0_CFG_1_IO_SPACE | T_SATA0_CFG_1_MEMORY_SPACE |
+		T_SATA0_CFG_1_BUS_MASTER | T_SATA0_CFG_1_SERR);
+	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_1);
+	val = T_SATA0_CFG_9_BASE_ADDRESS;
+	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_9);
 
+	/* Program Class Code and Programming interface for SATA */
 	val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA);
 	val |= T_SATA0_CFG_SATA_BACKDOOR_PROG_IF_EN;
 	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA);
 
-	writel(0x01060100, tegra->sata_regs + SCFG_OFFSET + T_SATA0_BKDOOR_CC);
+	val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_BKDOOR_CC);
+	val &=
+	    ~(T_SATA0_BKDOOR_CC_CLASS_CODE_MASK |
+	      T_SATA0_BKDOOR_CC_PROG_IF_MASK);
+	val |= T_SATA0_BKDOOR_CC_CLASS_CODE | T_SATA0_BKDOOR_CC_PROG_IF;
+	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_BKDOOR_CC);
 
 	val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA);
 	val &= ~T_SATA0_CFG_SATA_BACKDOOR_PROG_IF_EN;
 	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA);
 
-	/* Enable IO & memory access, bus master mode */
+	/* Enabling LPM capabilities through Backdoor Programming */
+	val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_AHCI_HBA_CAP_BKDR);
+	val |= (T_SATA0_AHCI_HBA_CAP_BKDR_PARTIAL_ST_CAP |
+		T_SATA0_AHCI_HBA_CAP_BKDR_SLUMBER_ST_CAP |
+		T_SATA0_AHCI_HBA_CAP_BKDR_SALP |
+		T_SATA0_AHCI_HBA_CAP_BKDR_SUPP_PM);
+	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_AHCI_HBA_CAP_BKDR);
+
+	/* SATA Second Level Clock Gating configuration
+	 * Enabling Gating of Tx/Rx clocks and driving Pad IDDQ and Lane
+	 * IDDQ Signals
+	 */
+	val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_35);
+	val &= ~T_SATA0_CFG_35_IDP_INDEX_MASK;
+	val |= T_SATA0_CFG_35_IDP_INDEX;
+	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_35);
 
-	val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_1);
-	val |= T_SATA0_CFG_1_IO_SPACE | T_SATA0_CFG_1_MEMORY_SPACE |
-		T_SATA0_CFG_1_BUS_MASTER | T_SATA0_CFG_1_SERR;
-	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_1);
+	val = T_SATA0_AHCI_IDP1_DATA;
+	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_AHCI_IDP1);
 
-	/* Program SATA MMIO */
+	val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_PHY_1);
+	val |= (T_SATA0_CFG_PHY_1_PADS_IDDQ_EN |
+		T_SATA0_CFG_PHY_1_PAD_PLL_IDDQ_EN);
+	writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_PHY_1);
 
-	writel(0x10000 << SATA_FPCI_BAR5_START_SHIFT,
-	       tegra->sata_regs + SATA_FPCI_BAR5);
+	/* Enabling IPFS Clock Gating */
+	val = readl(tegra->sata_regs + SATA_CONFIGURATION_0);
+	val &= ~SATA_CONFIGURATION_0_CLK_OVERRIDE;
+	writel(val, tegra->sata_regs + SATA_CONFIGURATION_0);
 
-	writel(0x08000 << T_SATA0_CFG_9_BASE_ADDRESS_SHIFT,
-	       tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_9);
+	tegra_ahci_handle_quirks(hpriv);
 
 	/* Unmask SATA interrupts */
 
@@ -279,14 +444,40 @@ static struct ata_port_operations ahci_tegra_port_ops = {
 };
 
 static const struct ata_port_info ahci_tegra_port_info = {
-	.flags		= AHCI_FLAG_COMMON,
+	.flags		= AHCI_FLAG_COMMON | ATA_FLAG_NO_DIPM,
 	.pio_mask	= ATA_PIO4,
 	.udma_mask	= ATA_UDMA6,
 	.port_ops	= &ahci_tegra_port_ops,
 };
 
+static const char *const tegra124_supply_names[] = {
+	"avdd", "hvdd", "vddio", "target-5v", "target-12v"
+};
+
+static const struct tegra_ahci_ops tegra124_ahci_ops = {
+	.init = tegra124_ahci_init,
+};
+
+static const struct tegra_ahci_soc tegra124_ahci_soc = {
+	.supply_names = tegra124_supply_names,
+	.num_supplies = ARRAY_SIZE(tegra124_supply_names),
+	.supports_devslp = false,
+	.ops = &tegra124_ahci_ops,
+};
+
+static const struct tegra_ahci_soc tegra210_ahci_soc = {
+	.supports_devslp = false,
+};
+
 static const struct of_device_id tegra_ahci_of_match[] = {
-	{ .compatible = "nvidia,tegra124-ahci" },
+	{
+		.compatible = "nvidia,tegra124-ahci",
+		.data = &tegra124_ahci_soc
+	},
+	{
+		.compatible = "nvidia,tegra210-ahci",
+		.data = &tegra210_ahci_soc
+	},
 	{}
 };
 MODULE_DEVICE_TABLE(of, tegra_ahci_of_match);
@@ -301,6 +492,7 @@ static int tegra_ahci_probe(struct platform_device *pdev)
 	struct tegra_ahci_priv *tegra;
 	struct resource *res;
 	int ret;
+	unsigned int i;
 
 	hpriv = ahci_platform_get_resources(pdev);
 	if (IS_ERR(hpriv))
@@ -313,12 +505,23 @@ static int tegra_ahci_probe(struct platform_device *pdev)
 	hpriv->plat_data = tegra;
 
 	tegra->pdev = pdev;
+	tegra->soc = of_device_get_match_data(&pdev->dev);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 	tegra->sata_regs = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(tegra->sata_regs))
 		return PTR_ERR(tegra->sata_regs);
 
+	/*
+	 * AUX registers is optional.
+	 */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+	if (res) {
+		tegra->sata_aux_regs = devm_ioremap_resource(&pdev->dev, res);
+		if (IS_ERR(tegra->sata_aux_regs))
+			return PTR_ERR(tegra->sata_aux_regs);
+	}
+
 	tegra->sata_rst = devm_reset_control_get(&pdev->dev, "sata");
 	if (IS_ERR(tegra->sata_rst)) {
 		dev_err(&pdev->dev, "Failed to get sata reset\n");
@@ -343,13 +546,17 @@ static int tegra_ahci_probe(struct platform_device *pdev)
 		return PTR_ERR(tegra->sata_clk);
 	}
 
-	tegra->supplies[0].supply = "avdd";
-	tegra->supplies[1].supply = "hvdd";
-	tegra->supplies[2].supply = "vddio";
-	tegra->supplies[3].supply = "target-5v";
-	tegra->supplies[4].supply = "target-12v";
+	tegra->supplies = devm_kcalloc(&pdev->dev,
+				       tegra->soc->num_supplies,
+				       sizeof(*tegra->supplies), GFP_KERNEL);
+	if (!tegra->supplies)
+		return -ENOMEM;
+
+	for (i = 0; i < tegra->soc->num_supplies; i++)
+		tegra->supplies[i].supply = tegra->soc->supply_names[i];
 
-	ret = devm_regulator_bulk_get(&pdev->dev, ARRAY_SIZE(tegra->supplies),
+	ret = devm_regulator_bulk_get(&pdev->dev,
+				      tegra->soc->num_supplies,
 				      tegra->supplies);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to get regulators\n");
@@ -385,5 +592,5 @@ static struct platform_driver tegra_ahci_driver = {
 module_platform_driver(tegra_ahci_driver);
 
 MODULE_AUTHOR("Mikko Perttunen <mperttunen@nvidia.com>");
-MODULE_DESCRIPTION("Tegra124 AHCI SATA driver");
+MODULE_DESCRIPTION("Tegra AHCI SATA driver");
 MODULE_LICENSE("GPL v2");

drivers/ata/libahci_platform.c

@@ -25,6 +25,7 @@
 #include <linux/phy/phy.h>
 #include <linux/pm_runtime.h>
 #include <linux/of_platform.h>
+#include <linux/reset.h>
 #include "ahci.h"
 
 static void ahci_host_stop(struct ata_host *host);
@@ -195,7 +196,8 @@ EXPORT_SYMBOL_GPL(ahci_platform_disable_regulators);
  * following order:
  * 1) Regulator
  * 2) Clocks (through ahci_platform_enable_clks)
- * 3) Phys
+ * 3) Resets
+ * 4) Phys
  *
  * If resource enabling fails at any point the previous enabled resources
  * are disabled in reverse order.
@@ -215,12 +217,19 @@ int ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
 	if (rc)
 		goto disable_regulator;
 
-	rc = ahci_platform_enable_phys(hpriv);
+	rc = reset_control_deassert(hpriv->rsts);
 	if (rc)
 		goto disable_clks;
 
+	rc = ahci_platform_enable_phys(hpriv);
+	if (rc)
+		goto disable_resets;
+
 	return 0;
 
+disable_resets:
+	reset_control_assert(hpriv->rsts);
+
 disable_clks:
 	ahci_platform_disable_clks(hpriv);
 
@@ -239,12 +248,15 @@ EXPORT_SYMBOL_GPL(ahci_platform_enable_resources);
  * following order:
  * 1) Phys
  * 2) Clocks (through ahci_platform_disable_clks)
- * 3) Regulator
+ * 3) Resets
+ * 4) Regulator
  */
 void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
 {
 	ahci_platform_disable_phys(hpriv);
 
+	reset_control_assert(hpriv->rsts);
+
 	ahci_platform_disable_clks(hpriv);
 
 	ahci_platform_disable_regulators(hpriv);
@@ -393,6 +405,12 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev)
 		hpriv->clks[i] = clk;
 	}
 
+	hpriv->rsts = devm_reset_control_array_get_optional_shared(dev);
+	if (IS_ERR(hpriv->rsts)) {
+		rc = PTR_ERR(hpriv->rsts);
+		goto err_out;
+	}
+
 	hpriv->nports = child_nodes = of_get_child_count(dev->of_node);
 
 	/*

drivers/ata/libata-core.c

@@ -6026,7 +6026,7 @@ struct ata_port *ata_port_alloc(struct ata_host *host)
 	return ap;
 }
 
-static void ata_host_release(struct device *gendev, void *res)
+static void ata_devres_release(struct device *gendev, void *res)
 {
 	struct ata_host *host = dev_get_drvdata(gendev);
 	int i;
@@ -6040,13 +6040,36 @@ static void ata_host_release(struct device *gendev, void *res)
 		if (ap->scsi_host)
 			scsi_host_put(ap->scsi_host);
 
+	}
+
+	dev_set_drvdata(gendev, NULL);
+	ata_host_put(host);
+}
+
+static void ata_host_release(struct kref *kref)
+{
+	struct ata_host *host = container_of(kref, struct ata_host, kref);
+	int i;
+
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_port *ap = host->ports[i];
+
 		kfree(ap->pmp_link);
 		kfree(ap->slave_link);
 		kfree(ap);
 		host->ports[i] = NULL;
 	}
+	kfree(host);
+}
 
-	dev_set_drvdata(gendev, NULL);
+void ata_host_get(struct ata_host *host)
+{
+	kref_get(&host->kref);
+}
+
+void ata_host_put(struct ata_host *host)
+{
+	kref_put(&host->kref, ata_host_release);
 }
 
 /**
@@ -6074,26 +6097,31 @@ struct ata_host *ata_host_alloc(struct device *dev, int max_ports)
 	struct ata_host *host;
 	size_t sz;
 	int i;
+	void *dr;
 
 	DPRINTK("ENTER\n");
 
-	if (!devres_open_group(dev, NULL, GFP_KERNEL))
-		return NULL;
-
 	/* alloc a container for our list of ATA ports (buses) */
 	sz = sizeof(struct ata_host) + (max_ports + 1) * sizeof(void *);
-	/* alloc a container for our list of ATA ports (buses) */
-	host = devres_alloc(ata_host_release, sz, GFP_KERNEL);
+	host = kzalloc(sz, GFP_KERNEL);
 	if (!host)
+		return NULL;
+
+	if (!devres_open_group(dev, NULL, GFP_KERNEL))
+		goto err_free;
+
+	dr = devres_alloc(ata_devres_release, 0, GFP_KERNEL);
+	if (!dr)
 		goto err_out;
 
-	devres_add(dev, host);
+	devres_add(dev, dr);
 	dev_set_drvdata(dev, host);
 
 	spin_lock_init(&host->lock);
 	mutex_init(&host->eh_mutex);
 	host->dev = dev;
 	host->n_ports = max_ports;
+	kref_init(&host->kref);
 
 	/* allocate ports bound to this host */
 	for (i = 0; i < max_ports; i++) {
@@ -6112,6 +6140,8 @@ struct ata_host *ata_host_alloc(struct device *dev, int max_ports)
 
  err_out:
 	devres_release_group(dev, NULL);
+ err_free:
+	kfree(host);
 	return NULL;
 }
 

drivers/ata/libata-transport.c

@@ -224,6 +224,8 @@ static DECLARE_TRANSPORT_CLASS(ata_port_class,
 
 static void ata_tport_release(struct device *dev)
 {
+	struct ata_port *ap = tdev_to_port(dev);
+	ata_host_put(ap->host);
 }
 
 /**
@@ -284,6 +286,7 @@ int ata_tport_add(struct device *parent,
 	dev->type = &ata_port_type;
 
 	dev->parent = parent;
+	ata_host_get(ap->host);
 	dev->release = ata_tport_release;
 	dev_set_name(dev, "ata%d", ap->print_id);
 	transport_setup_device(dev);
@@ -314,6 +317,7 @@ int ata_tport_add(struct device *parent,
  tport_err:
 	transport_destroy_device(dev);
 	put_device(dev);
+	ata_host_put(ap->host);
 	return error;
 }
 

drivers/ata/libata.h

@@ -100,6 +100,8 @@ extern int ata_port_probe(struct ata_port *ap);
 extern void __ata_port_probe(struct ata_port *ap);
 extern unsigned int ata_read_log_page(struct ata_device *dev, u8 log,
 				      u8 page, void *buf, unsigned int sectors);
+extern void ata_host_get(struct ata_host *host);
+extern void ata_host_put(struct ata_host *host);
 
 #define to_ata_port(d) container_of(d, struct ata_port, tdev)
 

drivers/ata/pata_arasan_cf.c

@@ -796,7 +796,7 @@ static int arasan_cf_probe(struct platform_device *pdev)
 	struct resource *res;
 	u32 quirk;
 	irq_handler_t irq_handler = NULL;
-	int ret = 0;
+	int ret;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res)
@@ -809,10 +809,8 @@ static int arasan_cf_probe(struct platform_device *pdev)
 	}
 
 	acdev = devm_kzalloc(&pdev->dev, sizeof(*acdev), GFP_KERNEL);
-	if (!acdev) {
-		dev_warn(&pdev->dev, "kzalloc fail\n");
+	if (!acdev)
 		return -ENOMEM;
-	}
 
 	if (pdata)
 		quirk = pdata->quirk;

drivers/ata/pata_bk3710.c

+// SPDX-License-Identifier: GPL-2.0
+
 /*
  * Palmchip BK3710 PATA controller driver
  *
@@ -8,10 +10,6 @@
  *
  * Copyright (C) 2006 Texas Instruments.
  * Copyright (C) 2007 MontaVista Software, Inc., <source@mvista.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
  */
 
 #include <linux/ata.h>
@@ -379,4 +377,4 @@ static int __init pata_bk3710_init(void)
 }
 
 module_init(pata_bk3710_init);
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");

drivers/ata/pata_falcon.c

+// SPDX-License-Identifier: GPL-2.0
+
 /*
  * Atari Falcon PATA controller driver
  *
@@ -7,10 +9,6 @@
  * Based on falconide.c:
  *
  *     Created 12 Jul 1997 by Geert Uytterhoeven
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
  */
 
 #include <linux/kernel.h>
@@ -180,5 +178,5 @@ module_init(pata_falcon_init_one);
 
 MODULE_AUTHOR("Bartlomiej Zolnierkiewicz");
 MODULE_DESCRIPTION("low-level driver for Atari Falcon PATA");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
 MODULE_VERSION(DRV_VERSION);

drivers/ata/pata_gayle.c

+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * Amiga Gayle PATA controller driver
+ *
+ * Copyright (c) 2018 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Based on gayle.c:
+ *
+ *     Created 12 Jul 1997 by Geert Uytterhoeven
+ */
+
+#include <linux/ata.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/libata.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/zorro.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_host.h>
+
+#include <asm/amigahw.h>
+#include <asm/amigaints.h>
+#include <asm/amigayle.h>
+#include <asm/ide.h>
+#include <asm/setup.h>
+
+#define DRV_NAME "pata_gayle"
+#define DRV_VERSION "0.1.0"
+
+#define GAYLE_CONTROL	0x101a
+
+static struct scsi_host_template pata_gayle_sht = {
+	ATA_PIO_SHT(DRV_NAME),
+};
+
+/* FIXME: is this needed? */
+static unsigned int pata_gayle_data_xfer(struct ata_queued_cmd *qc,
+					 unsigned char *buf,
+					 unsigned int buflen, int rw)
+{
+	struct ata_device *dev = qc->dev;
+	struct ata_port *ap = dev->link->ap;
+	void __iomem *data_addr = ap->ioaddr.data_addr;
+	unsigned int words = buflen >> 1;
+
+	/* Transfer multiple of 2 bytes */
+	if (rw == READ)
+		raw_insw((u16 *)data_addr, (u16 *)buf, words);
+	else
+		raw_outsw((u16 *)data_addr, (u16 *)buf, words);
+
+	/* Transfer trailing byte, if any. */
+	if (unlikely(buflen & 0x01)) {
+		unsigned char pad[2] = { };
+
+		/* Point buf to the tail of buffer */
+		buf += buflen - 1;
+
+		if (rw == READ) {
+			raw_insw((u16 *)data_addr, (u16 *)pad, 1);
+			*buf = pad[0];
+		} else {
+			pad[0] = *buf;
+			raw_outsw((u16 *)data_addr, (u16 *)pad, 1);
+		}
+		words++;
+	}
+
+	return words << 1;
+}
+
+/*
+ * Provide our own set_mode() as we don't want to change anything that has
+ * already been configured..
+ */
+static int pata_gayle_set_mode(struct ata_link *link,
+			       struct ata_device **unused)
+{
+	struct ata_device *dev;
+
+	ata_for_each_dev(dev, link, ENABLED) {
+		/* We don't really care */
+		dev->pio_mode = dev->xfer_mode = XFER_PIO_0;
+		dev->xfer_shift = ATA_SHIFT_PIO;
+		dev->flags |= ATA_DFLAG_PIO;
+		ata_dev_info(dev, "configured for PIO\n");
+	}
+	return 0;
+}
+
+static bool pata_gayle_irq_check(struct ata_port *ap)
+{
+	u8 ch;
+
+	ch = z_readb((unsigned long)ap->private_data);
+
+	return !!(ch & GAYLE_IRQ_IDE);
+}
+
+static void pata_gayle_irq_clear(struct ata_port *ap)
+{
+	(void)z_readb((unsigned long)ap->ioaddr.status_addr);
+	z_writeb(0x7c, (unsigned long)ap->private_data);
+}
+
+static struct ata_port_operations pata_gayle_a1200_ops = {
+	.inherits	= &ata_sff_port_ops,
+	.sff_data_xfer	= pata_gayle_data_xfer,
+	.sff_irq_check	= pata_gayle_irq_check,
+	.sff_irq_clear	= pata_gayle_irq_clear,
+	.cable_detect	= ata_cable_unknown,
+	.set_mode	= pata_gayle_set_mode,
+};
+
+static struct ata_port_operations pata_gayle_a4000_ops = {
+	.inherits	= &ata_sff_port_ops,
+	.sff_data_xfer	= pata_gayle_data_xfer,
+	.cable_detect	= ata_cable_unknown,
+	.set_mode	= pata_gayle_set_mode,
+};
+
+static int __init pata_gayle_init_one(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct gayle_ide_platform_data *pdata;
+	struct ata_host *host;
+	struct ata_port *ap;
+	void __iomem *base;
+	int ret;
+
+	pdata = dev_get_platdata(&pdev->dev);
+
+	dev_info(&pdev->dev, "Amiga Gayle IDE controller (A%u style)\n",
+		pdata->explicit_ack ? 1200 : 4000);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	if (!devm_request_mem_region(&pdev->dev, res->start,
+				     resource_size(res), DRV_NAME)) {
+		pr_err(DRV_NAME ": resources busy\n");
+		return -EBUSY;
+	}
+
+	/* allocate host */
+	host = ata_host_alloc(&pdev->dev, 1);
+	if (!host)
+		return -ENOMEM;
+
+	ap = host->ports[0];
+
+	if (pdata->explicit_ack)
+		ap->ops = &pata_gayle_a1200_ops;
+	else
+		ap->ops = &pata_gayle_a4000_ops;
+
+	ap->pio_mask = ATA_PIO4;
+	ap->flags |= ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY;
+
+	base = ZTWO_VADDR(pdata->base);
+	ap->ioaddr.data_addr		= base;
+	ap->ioaddr.error_addr		= base + 2 + 1 * 4;
+	ap->ioaddr.feature_addr		= base + 2 + 1 * 4;
+	ap->ioaddr.nsect_addr		= base + 2 + 2 * 4;
+	ap->ioaddr.lbal_addr		= base + 2 + 3 * 4;
+	ap->ioaddr.lbam_addr		= base + 2 + 4 * 4;
+	ap->ioaddr.lbah_addr		= base + 2 + 5 * 4;
+	ap->ioaddr.device_addr		= base + 2 + 6 * 4;
+	ap->ioaddr.status_addr		= base + 2 + 7 * 4;
+	ap->ioaddr.command_addr		= base + 2 + 7 * 4;
+
+	ap->ioaddr.altstatus_addr	= base + GAYLE_CONTROL;
+	ap->ioaddr.ctl_addr		= base + GAYLE_CONTROL;
+
+	ap->private_data = (void *)ZTWO_VADDR(pdata->irqport);
+
+	ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", pdata->base,
+		      pdata->base + GAYLE_CONTROL);
+
+	ret = ata_host_activate(host, IRQ_AMIGA_PORTS, ata_sff_interrupt,
+				IRQF_SHARED, &pata_gayle_sht);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, host);
+
+	return 0;
+}
+
+static int __exit pata_gayle_remove_one(struct platform_device *pdev)
+{
+	struct ata_host *host = platform_get_drvdata(pdev);
+
+	ata_host_detach(host);
+
+	return 0;
+}
+
+static struct platform_driver pata_gayle_driver = {
+	.remove = __exit_p(pata_gayle_remove_one),
+	.driver   = {
+		.name	= "amiga-gayle-ide",
+	},
+};
+
+module_platform_driver_probe(pata_gayle_driver, pata_gayle_init_one);
+
+MODULE_AUTHOR("Bartlomiej Zolnierkiewicz");
+MODULE_DESCRIPTION("low-level driver for Amiga Gayle PATA");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:amiga-gayle-ide");
+MODULE_VERSION(DRV_VERSION);

drivers/ata/pata_it821x.c

@@ -658,10 +658,10 @@ static u8 *it821x_firmware_command(struct ata_port *ap, u8 cmd, int len)
 	u8 status;
 	int n = 0;
 	u16 *buf = kmalloc(len, GFP_KERNEL);
-	if (buf == NULL) {
-		printk(KERN_ERR "it821x_firmware_command: Out of memory\n");
+
+	if (!buf)
 		return NULL;
-	}
+
 	/* This isn't quite a normal ATA command as we are talking to the
 	   firmware not the drives */
 	ap->ctl |= ATA_NIEN;

drivers/ata/pata_macio.c

@@ -1131,11 +1131,9 @@ static int pata_macio_attach(struct macio_dev *mdev,
 	/* Allocate and init private data structure */
 	priv = devm_kzalloc(&mdev->ofdev.dev,
 			    sizeof(struct pata_macio_priv), GFP_KERNEL);
-	if (priv == NULL) {
-		dev_err(&mdev->ofdev.dev,
-			"Failed to allocate private memory\n");
+	if (!priv)
 		return -ENOMEM;
-	}
+
 	priv->node = of_node_get(mdev->ofdev.dev.of_node);
 	priv->mdev = mdev;
 	priv->dev = &mdev->ofdev.dev;
@@ -1277,11 +1275,9 @@ static int pata_macio_pci_attach(struct pci_dev *pdev,
 	/* Allocate and init private data structure */
 	priv = devm_kzalloc(&pdev->dev,
 			    sizeof(struct pata_macio_priv), GFP_KERNEL);
-	if (priv == NULL) {
-		dev_err(&pdev->dev,
-			"Failed to allocate private memory\n");
+	if (!priv)
 		return -ENOMEM;
-	}
+
 	priv->node = of_node_get(np);
 	priv->pdev = pdev;
 	priv->dev = &pdev->dev;

drivers/ata/pata_mpc52xx.c

@@ -738,7 +738,6 @@ static int mpc52xx_ata_probe(struct platform_device *op)
 	/* Prepare our private structure */
 	priv = devm_kzalloc(&op->dev, sizeof(*priv), GFP_ATOMIC);
 	if (!priv) {
-		dev_err(&op->dev, "error allocating private structure\n");
 		rv = -ENOMEM;
 		goto err1;
 	}

drivers/ata/pata_samsung_cf.c

@@ -505,10 +505,8 @@ static int __init pata_s3c_probe(struct platform_device *pdev)
 	cpu_type = platform_get_device_id(pdev)->driver_data;
 
 	info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
-	if (!info) {
-		dev_err(dev, "failed to allocate memory for device data\n");
+	if (!info)
 		return -ENOMEM;
-	}
 
 	info->irq = platform_get_irq(pdev, 0);
 

drivers/ata/sata_dwc_460ex.c

@@ -901,7 +901,6 @@ static int sata_dwc_port_start(struct ata_port *ap)
 	/* Allocate Port Struct */
 	hsdevp = kzalloc(sizeof(*hsdevp), GFP_KERNEL);
 	if (!hsdevp) {
-		dev_err(ap->dev, "%s: kmalloc failed for hsdevp\n", __func__);
 		err = -ENOMEM;
 		goto CLEANUP;
 	}

include/linux/libata.h

@@ -617,6 +617,7 @@ struct ata_host {
 	void			*private_data;
 	struct ata_port_operations *ops;
 	unsigned long		flags;
+	struct kref		kref;
 
 	struct mutex		eh_mutex;
 	struct task_struct	*eh_owner;

include/linux/mfd/syscon/imx6q-iomuxc-gpr.h

@@ -243,6 +243,8 @@
 #define IMX6Q_GPR4_IPU_RD_CACHE_CTL		BIT(0)
 
 #define IMX6Q_GPR5_L2_CLK_STOP			BIT(8)
+#define IMX6Q_GPR5_SATA_SW_PD			BIT(10)
+#define IMX6Q_GPR5_SATA_SW_RST			BIT(11)
 
 #define IMX6Q_GPR6_IPU1_ID00_WR_QOS_MASK	(0xf << 0)
 #define IMX6Q_GPR6_IPU1_ID01_WR_QOS_MASK	(0xf << 4)