diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
index 93f231c7a3b43e3383439c77111abdbce7f63f09..28f1b6a07b70d8d07435236377d7bc02fdc5b183 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
@@ -19,7 +19,9 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts: true
+  interrupts:
+    maxItems: 1
+
   interrupt-controller: true
   "#interrupt-cells": true
   gpio-controller: true
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml
index 5687acaf19bfa7c23abf68b8ef91b81d1df0164d..3137db927fc0a7e419435c0c1eefb0021050654d 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml
@@ -20,7 +20,9 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts: true
+  interrupts:
+    maxItems: 1
+
   interrupt-controller: true
   "#interrupt-cells": true
   gpio-controller: true
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml
index a0a12171b6d0d9e415d4638954ed78aaf63d79e9..96b598bf9a76ff0984be7c08f0f7dcf531ff5c3d 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml
@@ -22,7 +22,9 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts: true
+  interrupts:
+    maxItems: 1
+
   interrupt-controller: true
   "#interrupt-cells": true
   gpio-controller: true
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml
index a4f6e4c588f4254d68ff870bae129e1e772c3115..c7c94d742ed2b983d1e3dd96484f78095c441096 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml
@@ -20,7 +20,9 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts: true
+  interrupts:
+    maxItems: 1
+
   interrupt-controller: true
   '#interrupt-cells': true
   gpio-controller: true
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
index 6e3808065845eb5ca3637ee3346971bda73aa0a2..a29b8a9e1f3145ef3e5c08f7318b96755a7a3b23 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
@@ -20,7 +20,9 @@ properties:
     description: Specifies the base address and size of the TLMM register space
     maxItems: 1
 
-  interrupts: true
+  interrupts:
+    maxItems: 1
+
   interrupt-controller: true
   "#interrupt-cells": true
   gpio-controller: true
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml
index ad0cad4694c0dad8c213c3a0d7a386361fd0d8a8..348d84c3cd2161af6753efe1378067a3048a7719 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml
@@ -20,7 +20,9 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts: true
+  interrupts:
+    maxItems: 1
+
   interrupt-controller: true
   "#interrupt-cells": true
   gpio-controller: true
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml
index cc6d0c9c510019801ad77dff31728f068ca31902..449e6e34be61689fc41421ade6d32d4bf7d1b158 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml
@@ -22,7 +22,9 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts: true
+  interrupts:
+    maxItems: 1
+
   interrupt-controller: true
   "#interrupt-cells": true
   gpio-controller: true
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml
index 5495f58905af0fcf1c0a38c2a97bc212348907ee..633c9e5ed49e062525587cabccf5087046a058fe 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml
@@ -20,7 +20,9 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts: true
+  interrupts:
+    maxItems: 1
+
   interrupt-controller: true
   "#interrupt-cells": true
   gpio-controller: true
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml
index c9a4a79e8d01bbba2d2a5e5a76592d391c307f96..6bcd5208080163faaecbf2de3fef5ae8d7d66916 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml
@@ -19,7 +19,9 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts: true
+  interrupts:
+    maxItems: 1
+
   interrupt-controller: true
   "#interrupt-cells": true
   gpio-controller: true
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml
index 33d07d531273014f85cf73d5481f53371fc4082f..cf386f644ccb02568b5d622458243a51bb567dab 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml
@@ -20,7 +20,9 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts: true
+  interrupts:
+    maxItems: 1
+
   interrupt-controller: true
   "#interrupt-cells": true
   gpio-controller: true
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml
index 9287cbbff7111e684b1a9faf6c0cd8d46d61b104..afe4a80f0b79621f2171e0ffe407c3a5029e3f60 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml
@@ -20,7 +20,9 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts: true
+  interrupts:
+    maxItems: 1
+
   interrupt-controller: true
   "#interrupt-cells": true
   gpio-controller: true
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml
index 858f45710fe267dd6a2f059232200bf5c451f1fd..5dfcc3eadbb0c69a4ec031be21c3cf45f5e5904b 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml
@@ -20,7 +20,9 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts: true
+  interrupts:
+    maxItems: 1
+
   interrupt-controller: true
   "#interrupt-cells": true
   gpio-controller: true
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml
index 55d5439c6c2494be7488e14d4d87c0a81303e470..f4a8180f59590799b8c5c7f686328009c1c80248 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml
@@ -22,7 +22,9 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts: true
+  interrupts:
+    maxItems: 1
+
   interrupt-controller: true
   "#interrupt-cells": true
   gpio-controller: true
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml
index 8e1cd4ba11164a8e741656647ff24cc4b1856bc9..047b4584e3c0139b6f1998c5279ccb6ae489444a 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml
@@ -20,7 +20,9 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts: true
+  interrupts:
+    maxItems: 1
+
   interrupt-controller: true
   "#interrupt-cells": true
   gpio-controller: true
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml
index 21ba32cc204aae2bdbc09df959118626b9712d8d..c07ee986804600d1181cc9d101a6e89a92fef541 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml
@@ -20,7 +20,9 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts: true
+  interrupts:
+    maxItems: 1
+
   interrupt-controller: true
   "#interrupt-cells": true
   gpio-controller: true
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
index 72cce38bc1ce6810d86f0515ac9623643cb59870..9412b9362328de15167ba812f1f3ca9421bf0087 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
@@ -74,7 +74,7 @@ patternProperties:
     oneOf:
       - $ref: "#/$defs/qcom-pmic-mpp-state"
       - patternProperties:
-          "mpp":
+          '-pins$':
             $ref: "#/$defs/qcom-pmic-mpp-state"
         additionalProperties: false
 
@@ -179,7 +179,7 @@ examples:
       };
 
       default-state {
-        gpio-mpp {
+        gpio-pins {
           pins = "mpp1", "mpp2", "mpp3", "mpp4";
           function = "digital";
           input-enable;
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml
index adf64bfaa4ed3f8a17bcb78fba521a633015a367..6271fd15e0b6764856bdf3412a032f17a355a0ff 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml
@@ -19,7 +19,9 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts: true
+  interrupts:
+    maxItems: 1
+
   interrupt-controller: true
   "#interrupt-cells": true
   gpio-controller: true
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml
index 29d50c4a0034cdb8cb466a19016e88254a8cbbe5..20bc967a17b5ac411eee4df37a0cf70de84f4f6c 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml
@@ -26,7 +26,9 @@ properties:
       - const: north
       - const: east
 
-  interrupts: true
+  interrupts:
+    maxItems: 1
+
   interrupt-controller: true
   "#interrupt-cells": true
   gpio-controller: true
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml
index b40f6dc6adaec31406eaf3d626d777f8bce83dbe..f33792a1af6c68c0267fda393c689a1ff5e7df4a 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml
@@ -26,7 +26,9 @@ properties:
       - const: north
       - const: south
 
-  interrupts: true
+  interrupts:
+    maxItems: 1
+
   interrupt-controller: true
   "#interrupt-cells": true
   gpio-controller: true
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml
index 24191d5f64acdb379965be22b8cadc9be2c136cd..0ace55c9868edeb2c0a13f63b6d4e324a6c100db 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml
@@ -28,7 +28,9 @@ properties:
       - const: east
       - const: south
 
-  interrupts: true
+  interrupts:
+    maxItems: 1
+
   interrupt-controller: true
   '#interrupt-cells': true
   gpio-controller: true
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml
index 7d2589387e1ae64c32dedad5285514a64f97f5c6..9a3f1fb8c2f73bde67756fd38d77d27ea60695ad 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml
@@ -65,7 +65,7 @@ $defs:
           List of gpio pins affected by the properties specified in this
           subnode.
         items:
-          pattern: "^gpio([0-1]|1[0-8])$"
+          pattern: "^gpio([0-9]|1[0-8])$"
 
       function:
         enum: [ swr_tx_clk, swr_tx_data, swr_rx_clk, swr_rx_data,
@@ -94,14 +94,12 @@ $defs:
           2: Lower Slew rate (slower edges)
           3: Reserved (No adjustments)
 
+      bias-bus-hold: true
       bias-pull-down: true
-
       bias-pull-up: true
-
       bias-disable: true
-
+      input-enable: true
       output-high: true
-
       output-low: true
 
     required:
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
index 4efde29c36a2693a62069626993a9b5abc48cb55..97b27d6835e983edf571a070e61a13310cbb3195 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
@@ -22,7 +22,9 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts: true
+  interrupts:
+    maxItems: 1
+
   interrupt-controller: true
   "#interrupt-cells": true
   gpio-controller: true
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml
index bd4fd8404aa4c5d556b5054d4eaa4c2e23ceae0f..ea6bd0b44f5695c3c90a46852c691cc33e7dd08e 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml
@@ -31,7 +31,9 @@ properties:
       - const: center
       - const: north
 
-  interrupts: true
+  interrupts:
+    maxItems: 1
+
   interrupt-controller: true
   "#interrupt-cells": true
   gpio-controller: true
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml
index 7585117c0f06e8e71df16d5b74e91b3d1d849052..f586b3aa138e5123bd0503f20a0d5381bafeee68 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml
@@ -22,7 +22,9 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts: true
+  interrupts:
+    maxItems: 1
+
   interrupt-controller: true
   "#interrupt-cells": true
   gpio-controller: true
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml
index c9627777ceb3217b667ab3f1663193e1d3621be4..23d7c030fec0aa78058fd116d8b940abc0388b6a 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml
@@ -23,7 +23,9 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts: true
+  interrupts:
+    maxItems: 1
+
   interrupt-controller: true
   "#interrupt-cells": true
   gpio-controller: true
@@ -48,6 +50,10 @@ patternProperties:
             $ref: "#/$defs/qcom-sdm845-tlmm-state"
         additionalProperties: false
 
+  "-hog(-[0-9]+)?$":
+    required:
+      - gpio-hog
+
 $defs:
   qcom-sdm845-tlmm-state:
     type: object
@@ -117,6 +123,7 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     pinctrl@3400000 {
@@ -130,6 +137,12 @@ examples:
         gpio-ranges = <&tlmm 0 0 151>;
         wakeup-parent = <&pdc_intc>;
 
+        ap-suspend-l-hog {
+            gpio-hog;
+            gpios = <126 GPIO_ACTIVE_LOW>;
+            output-low;
+        };
+
         cci0-default-state {
             pins = "gpio17", "gpio18";
             function = "cci_i2c";
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
index a76117e41d93023112cc2f4a77aaa5e986420fda..add3c7e64520b451fe35ee3f428b2e76b7c410e7 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
@@ -20,7 +20,9 @@ properties:
     description: Specifies the base address and size of the TLMM register space
     maxItems: 1
 
-  interrupts: true
+  interrupts:
+    maxItems: 1
+
   interrupt-controller: true
   "#interrupt-cells": true
   gpio-controller: true
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml
index 2f53905260e616d75b7bb04f14cc6897ec81a0a9..89c5562583d157aaca194d55590ed45ec5c992b0 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml
@@ -19,7 +19,9 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts: true
+  interrupts:
+    maxItems: 1
+
   interrupt-controller: true
   "#interrupt-cells": true
   gpio-controller: true
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml
index 164f24db8b2b6521bcb4aeaec31ac999d29072c7..29325483cd2b79b8518f69cce62e2c7ef2b0ce56 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml
@@ -26,7 +26,9 @@ properties:
       - const: south
       - const: east
 
-  interrupts: true
+  interrupts:
+    maxItems: 1
+
   interrupt-controller: true
   "#interrupt-cells": true
   gpio-controller: true
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml
index e1dd54a160d55033b44c16d131520a451f947dde..c9bc4893e8e8abbc5d61f51cc0412fe125b7b35f 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml
@@ -27,7 +27,9 @@ properties:
       - const: south
       - const: east
 
-  interrupts: true
+  interrupts:
+    maxItems: 1
+
   interrupt-controller: true
   "#interrupt-cells": true
   gpio-controller: true
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml
index 41e3e0afc9a88879efff4e18bfb0cdee30048366..d95935fcc8b5a1c9dd68bb905df7fa57bea613de 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml
@@ -22,11 +22,21 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts: true
+  interrupts:
+    minItems: 9
+    maxItems: 9
+
   interrupt-controller: true
   "#interrupt-cells": true
   gpio-controller: true
-  gpio-reserved-ranges: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 78
+
+  gpio-line-names:
+    maxItems: 156
+
   "#gpio-cells": true
   gpio-ranges: true
   wakeup-parent: true
@@ -61,7 +71,7 @@ $defs:
           subnode.
         items:
           oneOf:
-            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-7])$"
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-5])$"
             - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
         minItems: 1
         maxItems: 36
@@ -118,7 +128,16 @@ examples:
     pinctrl@f100000 {
         compatible = "qcom,sm6350-tlmm";
         reg = <0x0f100000 0x300000>;
-        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+
         gpio-controller;
         #gpio-cells = <2>;
         interrupt-controller;
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml
index d54ebb2bd5a8f96a09f5b7acaed531e249ec069f..e4231d10d76f50585cdf251d49521b0b11abd594 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml
@@ -22,7 +22,9 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts: true
+  interrupts:
+    maxItems: 1
+
   interrupt-controller: true
   "#interrupt-cells": true
   gpio-controller: true
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml
index 85adddbdee566d9958609d71f7ea18b3c66203a1..4376a9bd4d70dceafce08485701e8e52081852be 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml
@@ -27,7 +27,9 @@ properties:
       - const: north
       - const: south
 
-  interrupts: true
+  interrupts:
+    maxItems: 1
+
   interrupt-controller: true
   "#interrupt-cells": true
   gpio-controller: true
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
index c80f3847ac0873100203495b7fb79dc1b6d5fa73..56e058c315f75b8db9c9d2e5ef2a04939db63854 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
@@ -25,7 +25,9 @@ properties:
       - const: south
       - const: north
 
-  interrupts: true
+  interrupts:
+    maxItems: 1
+
   interrupt-controller: true
   "#interrupt-cells": true
   gpio-controller: true
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml
index 0b1e4aa5819e6525b03886fbb6156d788947a416..49a74f351e996c387639a02e2549b0ac172b4af1 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml
@@ -22,11 +22,20 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts: true
+  interrupts:
+    maxItems: 1
+
   interrupt-controller: true
   "#interrupt-cells": true
   gpio-controller: true
-  gpio-reserved-ranges: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 102
+
+  gpio-line-names:
+    maxItems: 203
+
   "#gpio-cells": true
   gpio-ranges: true
   wakeup-parent: true
@@ -61,7 +70,7 @@ $defs:
           subnode.
         items:
           oneOf:
-            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-3])$"
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-2])$"
             - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
         minItems: 1
         maxItems: 36
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml
index b5356d0f89f97ced64c17f83df17f4b00b544a13..56c8046f1be044510122af65a207c0c7f63d60e3 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml
@@ -22,7 +22,9 @@ properties:
   reg:
     maxItems: 1
 
-  interrupts: true
+  interrupts:
+    maxItems: 1
+
   interrupt-controller: true
   "#interrupt-cells": true
   gpio-controller: true
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml
index e1354f0c64f82a10076cebbf79954abb7dc4e6ef..cb5ba1bd6f8d2f4d7ff833cbd97341497b1f9626 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml
@@ -16,8 +16,9 @@ description:
 properties:
   interrupts:
     description:
-      Specifies the TLMM summary IRQ
-    maxItems: 1
+      TLMM summary IRQ and dirconn interrupts.
+    minItems: 1
+    maxItems: 9
 
   interrupt-controller: true