From 9d3b7ca42d6f70556c10ce3f6bdb32457077d947 Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Sat, 16 Jan 2021 17:40:38 +0100 Subject: [PATCH] media: imx6-mipi-csi2: Call remote subdev get_mbus_config to get active lanes Currently, the CSI2 subdevice is using the data-lanes from the neareast endpoint to config the CSI2 lanes. While this may work, the proper way to configure the hardware is to obtain the remote subdevice in v4l2_async_notifier_operations.bound(), and then call get_mbus_config using the remote subdevice to get the active lanes. Signed-off-by: Ezequiel Garcia Reviewed-by: Laurent Pinchart Reviewed-by: Philipp Zabel Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/imx/imx6-mipi-csi2.c | 108 ++++++++++++++++++--- 1 file changed, 96 insertions(+), 12 deletions(-) diff --git a/drivers/staging/media/imx/imx6-mipi-csi2.c b/drivers/staging/media/imx/imx6-mipi-csi2.c index 94d87d27d389..6b58899dcefe 100644 --- a/drivers/staging/media/imx/imx6-mipi-csi2.c +++ b/drivers/staging/media/imx/imx6-mipi-csi2.c @@ -42,7 +42,10 @@ struct csi2_dev { struct clk *pllref_clk; struct clk *pix_clk; /* what is this? */ void __iomem *base; - struct v4l2_fwnode_bus_mipi_csi2 bus; + + struct v4l2_subdev *remote; + unsigned int remote_pad; + unsigned short data_lanes; /* lock to protect all members below */ struct mutex lock; @@ -138,10 +141,8 @@ static void csi2_enable(struct csi2_dev *csi2, bool enable) } } -static void csi2_set_lanes(struct csi2_dev *csi2) +static void csi2_set_lanes(struct csi2_dev *csi2, unsigned int lanes) { - int lanes = csi2->bus.num_data_lanes; - writel(lanes - 1, csi2->base + CSI2_N_LANES); } @@ -250,13 +251,12 @@ static int __maybe_unused csi2_dphy_wait_ulp(struct csi2_dev *csi2) } /* Waits for low-power LP-11 state on data and clock lanes. */ -static void csi2_dphy_wait_stopstate(struct csi2_dev *csi2) +static void csi2_dphy_wait_stopstate(struct csi2_dev *csi2, unsigned int lanes) { u32 mask, reg; int ret; - mask = PHY_STOPSTATECLK | (((1 << csi2->bus.num_data_lanes) - 1) << - PHY_STOPSTATEDATA_BIT); + mask = PHY_STOPSTATECLK | (((1 << lanes) - 1) << PHY_STOPSTATEDATA_BIT); ret = readl_poll_timeout(csi2->base + CSI2_PHY_STATE, reg, (reg & mask) == mask, 0, 500000); @@ -300,8 +300,65 @@ static void csi2ipu_gasket_init(struct csi2_dev *csi2) writel(reg, csi2->base + CSI2IPU_GASKET); } +static int csi2_get_active_lanes(struct csi2_dev *csi2, unsigned int *lanes) +{ + struct v4l2_mbus_config mbus_config = { 0 }; + unsigned int num_lanes = UINT_MAX; + int ret; + + *lanes = csi2->data_lanes; + + ret = v4l2_subdev_call(csi2->remote, pad, get_mbus_config, + csi2->remote_pad, &mbus_config); + if (ret == -ENOIOCTLCMD) { + dev_dbg(csi2->dev, "No remote mbus configuration available\n"); + return 0; + } + + if (ret) { + dev_err(csi2->dev, "Failed to get remote mbus configuration\n"); + return ret; + } + + if (mbus_config.type != V4L2_MBUS_CSI2_DPHY) { + dev_err(csi2->dev, "Unsupported media bus type %u\n", + mbus_config.type); + return -EINVAL; + } + + switch (mbus_config.flags & V4L2_MBUS_CSI2_LANES) { + case V4L2_MBUS_CSI2_1_LANE: + num_lanes = 1; + break; + case V4L2_MBUS_CSI2_2_LANE: + num_lanes = 2; + break; + case V4L2_MBUS_CSI2_3_LANE: + num_lanes = 3; + break; + case V4L2_MBUS_CSI2_4_LANE: + num_lanes = 4; + break; + default: + num_lanes = csi2->data_lanes; + break; + } + + if (num_lanes > csi2->data_lanes) { + dev_err(csi2->dev, + "Unsupported mbus config: too many data lanes %u\n", + num_lanes); + return -EINVAL; + } + + *lanes = num_lanes; + + return 0; +} + static int csi2_start(struct csi2_dev *csi2) { + unsigned int lanes; int ret; ret = clk_prepare_enable(csi2->pix_clk); @@ -316,12 +373,16 @@ static int csi2_start(struct csi2_dev *csi2) if (ret) goto err_disable_clk; + ret = csi2_get_active_lanes(csi2, &lanes); + if (ret) + goto err_disable_clk; + /* Step 4 */ - csi2_set_lanes(csi2); + csi2_set_lanes(csi2, lanes); csi2_enable(csi2, true); /* Step 5 */ - csi2_dphy_wait_stopstate(csi2); + csi2_dphy_wait_stopstate(csi2, lanes); /* Step 6 */ ret = v4l2_subdev_call(csi2->src_sd, video, s_stream, 1); @@ -544,12 +605,35 @@ static int csi2_notify_bound(struct v4l2_async_notifier *notifier, { struct csi2_dev *csi2 = notifier_to_dev(notifier); struct media_pad *sink = &csi2->sd.entity.pads[CSI2_SINK_PAD]; + int pad; + + pad = media_entity_get_fwnode_pad(&sd->entity, asd->match.fwnode, + MEDIA_PAD_FL_SOURCE); + if (pad < 0) { + dev_err(csi2->dev, "Failed to find pad for %s\n", sd->name); + return pad; + } + + csi2->remote = sd; + csi2->remote_pad = pad; + + dev_dbg(csi2->dev, "Bound %s pad: %d\n", sd->name, pad); return v4l2_create_fwnode_links_to_pad(sd, sink); } +static void csi2_notify_unbind(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *sd, + struct v4l2_async_subdev *asd) +{ + struct csi2_dev *csi2 = notifier_to_dev(notifier); + + csi2->remote = NULL; +} + static const struct v4l2_async_notifier_operations csi2_notify_ops = { .bound = csi2_notify_bound, + .unbind = csi2_notify_unbind, }; static int csi2_async_register(struct csi2_dev *csi2) @@ -572,10 +656,10 @@ static int csi2_async_register(struct csi2_dev *csi2) if (ret) goto err_parse; - csi2->bus = vep.bus.mipi_csi2; + csi2->data_lanes = vep.bus.mipi_csi2.num_data_lanes; - dev_dbg(csi2->dev, "data lanes: %d\n", csi2->bus.num_data_lanes); - dev_dbg(csi2->dev, "flags: 0x%08x\n", csi2->bus.flags); + dev_dbg(csi2->dev, "data lanes: %d\n", vep.bus.mipi_csi2.num_data_lanes); + dev_dbg(csi2->dev, "flags: 0x%08x\n", vep.bus.mipi_csi2.flags); asd = kzalloc(sizeof(*asd), GFP_KERNEL); if (!asd) { -- GitLab