提交 9ba1e0e6 编写于 作者: L Lorenzo Bianconi 提交者: Felix Fietkau

mt76: unify rxwi parsing between mt76x2 and mt76x0 drivers

Unify rxwi parsing between mt76x2 and mt76x0. Remove the following
routines:
- mt76x0_phy_get_rssi
- mt76x0_queue_rx_skb
- mt76x0_mac_process_rx
Moreover remove mt76x2/common.c and mt76x0/mac.h since are empty files
Enable CCMP PN sw validation
Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>
上级 d9f8934e
......@@ -83,7 +83,8 @@ static const struct mt76_reg_pair mt76x0_mac_reg_table[] = {
{ MT_LDO_CTRL_1, 0x6B006464 },
{ MT_HT_BASIC_RATE, 0x00004003 },
{ MT_HT_CTRL_CFG, 0x000001FF },
{ MT_TXOP_HLDR_ET, 0x00000000 }
{ MT_TXOP_HLDR_ET, 0x00000000 },
{ MT_PN_PAD_MODE, 0x00000003 },
};
static const struct mt76_reg_pair mt76x0_bbp_init_tab[] = {
......
......@@ -195,46 +195,3 @@ void mt76x0_mac_set_ampdu_factor(struct mt76x02_dev *dev)
mt76_wr(dev, MT_MAX_LEN_CFG, 0xa0fff |
FIELD_PREP(MT_MAX_LEN_CFG_AMPDU, min_factor));
}
u32 mt76x0_mac_process_rx(struct mt76x02_dev *dev, struct sk_buff *skb,
void *rxi)
{
struct mt76_rx_status *status = (struct mt76_rx_status *) skb->cb;
struct mt76x02_rxwi *rxwi = rxi;
u32 len, ctl = le32_to_cpu(rxwi->ctl);
u16 rate = le16_to_cpu(rxwi->rate);
struct mt76x02_sta *sta;
int rssi, pad_len = 0;
u8 wcid;
len = FIELD_GET(MT_RXWI_CTL_MPDU_LEN, ctl);
if (WARN_ON(len < 10))
return 0;
if (rxwi->rxinfo & cpu_to_le32(MT_RXINFO_DECRYPT)) {
status->flag |= RX_FLAG_DECRYPTED;
status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED;
}
if (rxwi->rxinfo & MT_RXINFO_L2PAD)
pad_len += 2;
wcid = FIELD_GET(MT_RXWI_CTL_WCID, ctl);
sta = mt76x02_rx_get_sta(&dev->mt76, wcid);
mt76x02_remove_hdr_pad(skb, pad_len);
pskb_trim(skb, len);
status->chains = BIT(0);
rssi = mt76x0_phy_get_rssi(dev, rxwi);
status->chain_signal[0] = status->signal = rssi;
status->freq = dev->mt76.chandef.chan->center_freq;
status->band = dev->mt76.chandef.chan->band;
if (sta) {
ewma_signal_add(&sta->rssi, status->signal);
sta->inactive_count = 0;
}
return mt76x02_mac_process_rate(status, rate);
}
/*
* Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org>
* Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __MT76_MAC_H
#define __MT76_MAC_H
u32 mt76x0_mac_process_rx(struct mt76x02_dev *dev, struct sk_buff *skb,
void *rxi);
#endif
......@@ -14,7 +14,6 @@
*/
#include "mt76x0.h"
#include "mac.h"
#include "../mt76x02_util.h"
#include <linux/etherdevice.h>
......
......@@ -74,7 +74,6 @@ void mt76x0_agc_restore(struct mt76x02_dev *dev);
int mt76x0_phy_set_channel(struct mt76x02_dev *dev,
struct cfg80211_chan_def *chandef);
void mt76x0_phy_recalibrate_after_assoc(struct mt76x02_dev *dev);
int mt76x0_phy_get_rssi(struct mt76x02_dev *dev, struct mt76x02_rxwi *rxwi);
void mt76x0_phy_set_txpower(struct mt76x02_dev *dev);
/* MAC */
......@@ -88,7 +87,5 @@ void mt76x0_mac_set_ampdu_factor(struct mt76x02_dev *dev);
/* TX */
void mt76x0_tx(struct ieee80211_hw *hw, struct ieee80211_tx_control *control,
struct sk_buff *skb);
void mt76x0_queue_rx_skb(struct mt76_dev *mdev, enum mt76_rxq_id q,
struct sk_buff *skb);
#endif
......@@ -226,13 +226,6 @@ mt76x0_bbp_set_ctrlch(struct mt76x02_dev *dev, enum nl80211_chan_width width,
mt76_rmw_field(dev, MT_BBP(TXBE, 0), MT_BBP_TXBE_R0_CTRL_CHAN, ctrl);
}
int mt76x0_phy_get_rssi(struct mt76x02_dev *dev, struct mt76x02_rxwi *rxwi)
{
struct mt76x02_rx_freq_cal *caldata = &dev->cal.rx;
return rxwi->rssi[0] + caldata->rssi_offset[0] - caldata->lna_gain;
}
static void mt76x0_vco_cal(struct mt76x02_dev *dev, u8 channel)
{
u8 val;
......
......@@ -17,7 +17,6 @@
#include <linux/tracepoint.h>
#include "mt76x0.h"
#include "mac.h"
#undef TRACE_SYSTEM
#define TRACE_SYSTEM mt76x0
......
......@@ -45,19 +45,3 @@ void mt76x0_tx(struct ieee80211_hw *hw, struct ieee80211_tx_control *control,
mt76_tx(&dev->mt76, control->sta, wcid, skb);
}
EXPORT_SYMBOL_GPL(mt76x0_tx);
void mt76x0_queue_rx_skb(struct mt76_dev *mdev, enum mt76_rxq_id q,
struct sk_buff *skb)
{
struct mt76x02_dev *dev = container_of(mdev, struct mt76x02_dev, mt76);
void *rxwi = skb->data;
skb_pull(skb, sizeof(struct mt76x02_rxwi));
if (mt76x0_mac_process_rx(dev, skb, rxwi)) {
dev_kfree_skb(skb);
return;
}
mt76_rx(&dev->mt76, q, skb);
}
EXPORT_SYMBOL_GPL(mt76x0_queue_rx_skb);
......@@ -218,7 +218,7 @@ static int mt76x0u_probe(struct usb_interface *usb_intf,
.tx_prepare_skb = mt76x02u_tx_prepare_skb,
.tx_complete_skb = mt76x02_tx_complete_skb,
.tx_status_data = mt76x02_tx_status_data,
.rx_skb = mt76x0_queue_rx_skb,
.rx_skb = mt76x02_queue_rx_skb,
};
struct usb_device *usb_dev = interface_to_usbdev(usb_intf);
struct mt76x02_dev *dev;
......
......@@ -686,4 +686,3 @@ int mt76x02_mac_process_rx(struct mt76x02_dev *dev, struct sk_buff *skb,
return mt76x02_mac_process_rate(status, rate);
}
EXPORT_SYMBOL_GPL(mt76x02_mac_process_rx);
......@@ -20,6 +20,7 @@
#include "mt76x02_dma.h"
#include "mt76x02_regs.h"
#include "mt76x02_mac.h"
#include "mt76x02_util.h"
#define CCK_RATE(_idx, _rate) { \
.bitrate = _rate, \
......@@ -531,4 +532,27 @@ void mt76x02_set_beacon_offsets(struct mt76_dev *dev)
}
EXPORT_SYMBOL_GPL(mt76x02_set_beacon_offsets);
void mt76x02_queue_rx_skb(struct mt76_dev *mdev, enum mt76_rxq_id q,
struct sk_buff *skb)
{
struct mt76x02_dev *dev = container_of(mdev, struct mt76x02_dev, mt76);
void *rxwi = skb->data;
if (q == MT_RXQ_MCU) {
/* this is used just by mmio code */
skb_queue_tail(&mdev->mmio.mcu.res_q, skb);
wake_up(&mdev->mmio.mcu.wait);
return;
}
skb_pull(skb, sizeof(struct mt76x02_rxwi));
if (mt76x02_mac_process_rx(dev, skb, rxwi)) {
dev_kfree_skb(skb);
return;
}
mt76_rx(mdev, q, skb);
}
EXPORT_SYMBOL_GPL(mt76x02_queue_rx_skb);
MODULE_LICENSE("Dual BSD/GPL");
......@@ -141,6 +141,8 @@ void mt76x02_tx_complete(struct mt76_dev *dev, struct sk_buff *skb);
void mt76x02_tx_complete_skb(struct mt76_dev *mdev, struct mt76_queue *q,
struct mt76_queue_entry *e, bool flush);
bool mt76x02_tx_status_data(struct mt76_dev *dev, u8 *update);
void mt76x02_queue_rx_skb(struct mt76_dev *mdev, enum mt76_rxq_id q,
struct sk_buff *skb);
extern const u16 mt76x02_beacon_offsets[16];
void mt76x02_set_beacon_offsets(struct mt76_dev *dev);
......
......@@ -3,8 +3,7 @@ obj-$(CONFIG_MT76x2E) += mt76x2e.o
obj-$(CONFIG_MT76x2U) += mt76x2u.o
mt76x2-common-y := \
eeprom.o tx.o mac.o init.o common.o phy.o \
debugfs.o mcu.o
eeprom.o tx.o mac.o init.o phy.o debugfs.o mcu.o
mt76x2e-y := \
pci.o pci_dma.o pci_main.o pci_init.o pci_tx.o \
......
/*
* Copyright (C) 2016 Felix Fietkau <nbd@nbd.name>
* Copyright (C) 2018 Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include "mt76x2.h"
#include "../mt76x02_mac.h"
void mt76x2_queue_rx_skb(struct mt76_dev *mdev, enum mt76_rxq_id q,
struct sk_buff *skb)
{
struct mt76x02_dev *dev = container_of(mdev, struct mt76x02_dev, mt76);
void *rxwi = skb->data;
if (q == MT_RXQ_MCU) {
/* this is used just by mmio code */
skb_queue_tail(&mdev->mmio.mcu.res_q, skb);
wake_up(&mdev->mmio.mcu.wait);
return;
}
skb_pull(skb, sizeof(struct mt76x02_rxwi));
if (mt76x02_mac_process_rx(dev, skb, rxwi)) {
dev_kfree_skb(skb);
return;
}
mt76_rx(&dev->mt76, q, skb);
}
EXPORT_SYMBOL_GPL(mt76x2_queue_rx_skb);
......@@ -101,8 +101,6 @@ void mt76x2_mac_set_tx_protection(struct mt76x02_dev *dev, u32 val);
void mt76x2_pre_tbtt_tasklet(unsigned long arg);
void mt76x2_rx_poll_complete(struct mt76_dev *mdev, enum mt76_rxq_id q);
void mt76x2_queue_rx_skb(struct mt76_dev *mdev, enum mt76_rxq_id q,
struct sk_buff *skb);
void mt76x2_sta_ps(struct mt76_dev *dev, struct ieee80211_sta *sta, bool ps);
......
......@@ -359,7 +359,7 @@ struct mt76x02_dev *mt76x2_alloc_device(struct device *pdev)
.update_survey = mt76x2_update_channel,
.tx_prepare_skb = mt76x2_tx_prepare_skb,
.tx_complete_skb = mt76x2_tx_complete_skb,
.rx_skb = mt76x2_queue_rx_skb,
.rx_skb = mt76x02_queue_rx_skb,
.rx_poll_complete = mt76x2_rx_poll_complete,
.sta_ps = mt76x2_sta_ps,
.get_tx_txpwr_adj = mt76x2_tx_get_txpwr_adj,
......
......@@ -141,7 +141,7 @@ struct mt76x02_dev *mt76x2u_alloc_device(struct device *pdev)
.tx_prepare_skb = mt76x02u_tx_prepare_skb,
.tx_complete_skb = mt76x02_tx_complete_skb,
.tx_status_data = mt76x02_tx_status_data,
.rx_skb = mt76x2_queue_rx_skb,
.rx_skb = mt76x02_queue_rx_skb,
};
struct mt76x02_dev *dev;
struct mt76_dev *mdev;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册