sfp: add support for 1000Base-PX and 1000Base-BX10

Add support for decoding the transceiver information for 1000Base-PX and
1000Base-BX10.  These use 1000BASE-X protocol.
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/phy/sfp-bus.c

@@ -165,10 +165,26 @@ EXPORT_SYMBOL_GPL(sfp_parse_interface);
 void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
 		       unsigned long *support)
 {
+	unsigned int br_min, br_nom, br_max;
+
 	phylink_set(support, Autoneg);
 	phylink_set(support, Pause);
 	phylink_set(support, Asym_Pause);
 
+	/* Decode the bitrate information to MBd */
+	br_min = br_nom = br_max = 0;
+	if (id->base.br_nominal) {
+		if (id->base.br_nominal != 255) {
+			br_nom = id->base.br_nominal * 100;
+			br_min = br_nom + id->base.br_nominal * id->ext.br_min;
+			br_max = br_nom + id->base.br_nominal * id->ext.br_max;
+		} else if (id->ext.br_max) {
+			br_nom = 250 * id->ext.br_max;
+			br_max = br_nom + br_nom * id->ext.br_min / 100;
+			br_min = br_nom - br_nom * id->ext.br_min / 100;
+		}
+	}
+
 	/* Set ethtool support from the compliance fields. */
 	if (id->base.e10g_base_sr)
 		phylink_set(support, 10000baseSR_Full);
@@ -187,6 +203,11 @@ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
 		phylink_set(support, 1000baseT_Full);
 	}
 
+	/* 1000Base-PX or 1000Base-BX10 */
+	if ((id->base.e_base_px || id->base.e_base_bx10) &&
+	    br_min <= 1300 && br_max >= 1200)
+		phylink_set(support, 1000baseX_Full);
+
 	switch (id->base.extended_cc) {
 	case 0x00: /* Unspecified */
 		break;