ARM: dts: aspeed: bletchley: Add INA230 sensor on each sled

Add INA230 node on each sled based on EVT HW.
Signed-off-by: NPotin Lai <potin.lai@quantatw.com>
Reviewed-by: NJoel Stanley <joel@jms.id.au>
Reviewed-by: NPatrick Williams <patrick@stwcx.xyz>
Link: https://lore.kernel.org/r/20220215163151.32252-9-potin.lai@quantatw.comSigned-off-by: NJoel Stanley <joel@jms.id.au>

arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts

@@ -248,7 +248,11 @@
 
 &i2c0 {
 	status = "okay";
-	/* TODO: Add ADC INA230 */
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
 
 	mp5023@40 {
 		compatible = "mps,mp5023";
@@ -314,7 +318,11 @@
 
 &i2c1 {
 	status = "okay";
-	/* TODO: Add ADC INA230 */
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
 
 	mp5023@40 {
 		compatible = "mps,mp5023";
@@ -384,7 +392,11 @@
 
 &i2c2 {
 	status = "okay";
-	/* TODO: Add ADC INA230 */
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
 
 	mp5023@40 {
 		compatible = "mps,mp5023";
@@ -450,7 +462,11 @@
 
 &i2c3 {
 	status = "okay";
-	/* TODO: Add ADC INA230 */
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
 
 	mp5023@40 {
 		compatible = "mps,mp5023";
@@ -516,7 +532,11 @@
 
 &i2c4 {
 	status = "okay";
-	/* TODO: Add ADC INA230 */
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
 
 	mp5023@40 {
 		compatible = "mps,mp5023";
@@ -582,7 +602,11 @@
 
 &i2c5 {
 	status = "okay";
-	/* TODO: Add ADC INA230 */
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
 
 	mp5023@40 {
 		compatible = "mps,mp5023";