dt-bindings: memory: fsl: convert ifc binding to yaml schema

Convert the txt binding to yaml format and add description.  Drop the
"simple-bus" compatible string from the example and not allowed by the
binding any more.  This will help to enforce the correct probe order
between parent device and child devices, but will require the ifc driver
to probe the child devices to work properly.
Signed-off-by: NLi Yang <leoyang.li@nxp.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211116211846.16335-2-leoyang.li@nxp.comSigned-off-by: NKrzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ifc.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/fsl/fsl,ifc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: FSL/NXP Integrated Flash Controller
+
+maintainers:
+  - Li Yang <leoyang.li@nxp.com>
+
+description: |
+  NXP's integrated flash controller (IFC) is an advanced version of the
+  enhanced local bus controller which includes similar programming and signal
+  interfaces with an extended feature set. The IFC provides access to multiple
+  external memory types, such as NAND flash (SLC and MLC), NOR flash, EPROM,
+  SRAM and other memories where address and data are shared on a bus.
+
+properties:
+  $nodename:
+    pattern: "^memory-controller@[0-9a-f]+$"
+
+  compatible:
+    const: fsl,ifc
+
+  "#address-cells":
+    enum: [2, 3]
+    description: |
+      Should be either two or three.  The first cell is the chipselect
+      number, and the remaining cells are the offset into the chipselect.
+
+  "#size-cells":
+    enum: [1, 2]
+    description: |
+      Either one or two, depending on how large each chipselect can be.
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    description: |
+      IFC may have one or two interrupts.  If two interrupt specifiers are
+      present, the first is the "common" interrupt (CM_EVTER_STAT), and the
+      second is the NAND interrupt (NAND_EVTER_STAT).  If there is only one,
+      that interrupt reports both types of event.
+
+  little-endian:
+    type: boolean
+    description: |
+      If this property is absent, the big-endian mode will be in use as default
+      for registers.
+
+  ranges:
+    description: |
+      Each range corresponds to a single chipselect, and covers the entire
+      access window as configured.
+
+patternProperties:
+  "^.*@[a-f0-9]+(,[a-f0-9]+)+$":
+    type: object
+    description: |
+      Child device nodes describe the devices connected to IFC such as NOR (e.g.
+      cfi-flash) and NAND (fsl,ifc-nand). There might be board specific devices
+      like FPGAs, CPLDs, etc.
+
+    required:
+      - compatible
+      - reg
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        memory-controller@ffe1e000 {
+            compatible = "fsl,ifc";
+            #address-cells = <2>;
+            #size-cells = <1>;
+            reg = <0x0 0xffe1e000 0 0x2000>;
+            interrupts = <16 2 19 2>;
+            little-endian;
+
+            /* NOR, NAND Flashes and CPLD on board */
+            ranges = <0x0 0x0 0x0 0xee000000 0x02000000>,
+                     <0x1 0x0 0x0 0xffa00000 0x00010000>,
+                     <0x3 0x0 0x0 0xffb00000 0x00020000>;
+
+            flash@0,0 {
+                #address-cells = <1>;
+                #size-cells = <1>;
+                compatible = "cfi-flash";
+                reg = <0x0 0x0 0x2000000>;
+                bank-width = <2>;
+                device-width = <1>;
+
+                partition@0 {
+                    /* 32MB for user data */
+                    reg = <0x0 0x02000000>;
+                    label = "NOR Data";
+                };
+            };
+        };
+    };

Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt

-Integrated Flash Controller
-
-Properties:
-- name : Should be ifc
-- compatible : should contain "fsl,ifc". The version of the integrated
-               flash controller can be found in the IFC_REV register at
-               offset zero.
-
-- #address-cells : Should be either two or three.  The first cell is the
-                   chipselect number, and the remaining cells are the
-                   offset into the chipselect.
-- #size-cells : Either one or two, depending on how large each chipselect
-                can be.
-- reg : Offset and length of the register set for the device
-- interrupts: IFC may have one or two interrupts.  If two interrupt
-              specifiers are present, the first is the "common"
-              interrupt (CM_EVTER_STAT), and the second is the NAND
-              interrupt (NAND_EVTER_STAT).  If there is only one,
-              that interrupt reports both types of event.
-
-- little-endian : If this property is absent, the big-endian mode will
-                  be in use as default for registers.
-
-- ranges : Each range corresponds to a single chipselect, and covers
-           the entire access window as configured.
-
-Child device nodes describe the devices connected to IFC such as NOR (e.g.
-cfi-flash) and NAND (fsl,ifc-nand). There might be board specific devices
-like FPGAs, CPLDs, etc.
-
-Example:
-
-	ifc@ffe1e000 {
-		compatible = "fsl,ifc", "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		reg = <0x0 0xffe1e000 0 0x2000>;
-		interrupts = <16 2 19 2>;
-		little-endian;
-
-		/* NOR, NAND Flashes and CPLD on board */
-		ranges = <0x0 0x0 0x0 0xee000000 0x02000000
-			  0x1 0x0 0x0 0xffa00000 0x00010000
-			  0x3 0x0 0x0 0xffb00000 0x00020000>;
-
-		flash@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x2000000>;
-			bank-width = <2>;
-			device-width = <1>;
-
-			partition@0 {
-				/* 32MB for user data */
-				reg = <0x0 0x02000000>;
-				label = "NOR Data";
-			};
-		};
-
-		flash@1,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,ifc-nand";
-			reg = <0x1 0x0 0x10000>;
-
-			partition@0 {
-				/* This location must not be altered  */
-				/* 1MB for u-boot Bootloader Image */
-				reg = <0x0 0x00100000>;
-				label = "NAND U-Boot Image";
-				read-only;
-			};
-		};
-
-		cpld@3,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,p1010rdb-cpld";
-			reg = <0x3 0x0 0x000001f>;
-		};
-	};