Skip to content

K
Kernel

openeuler / Kernel
大约 1 年 前同步成功

通知 5
Star 0
Fork 0
K
Kernel

体验新版 GitCode，发现更多精彩内容 >>

提交 975f957d 编写于 作者: L Linus Torvalds
浏览文件
操作

Merge HEAD from master.kernel.org:/home/rmk/linux-2.6-serial.git

上级 2321fbd2 661299d9
隐藏空白更改
内联 并排
Showing with 380 addition and 512 deletion
drivers/parport/parport_serial.c
浏览文件 @ 975f957d
...@@ -23,13 +23,8 @@ ...@@ -23,13 +23,8 @@
#include <linux/pci.h> #include <linux/pci.h>
#include <linux/parport.h> #include <linux/parport.h>
#include <linux/parport_pc.h> #include <linux/parport_pc.h>
#include <linux/serial.h>
#include <linux/serialP.h>
#include <linux/list.h>
#include <linux/8250_pci.h> #include <linux/8250_pci.h>
#include <asm/serial.h>
enum parport_pc_pci_cards { enum parport_pc_pci_cards {
titan_110l = 0, titan_110l = 0,
titan_210l, titan_210l,
...@@ -168,182 +163,147 @@ static struct pci_device_id parport_serial_pci_tbl[] = { ...@@ -168,182 +163,147 @@ static struct pci_device_id parport_serial_pci_tbl[] = {
}; };
MODULE_DEVICE_TABLE(pci,parport_serial_pci_tbl); MODULE_DEVICE_TABLE(pci,parport_serial_pci_tbl);
struct pci_board_no_ids { /*
int flags; * This table describes the serial "geometry" of these boards. Any
int num_ports; * quirks for these can be found in drivers/serial/8250_pci.c
int base_baud; *
int uart_offset; * Cards not tested are marked n/t
int reg_shift; * If you have one of these cards and it works for you, please tell me..
int (*init_fn)(struct pci_dev *dev, struct pci_board_no_ids *board, */
int enable); static struct pciserial_board pci_parport_serial_boards[] __devinitdata = {
int first_uart_offset; [titan_110l] = {
}; .flags = FL_BASE1 | FL_BASE_BARS,
.num_ports = 1,
static int __devinit siig10x_init_fn(struct pci_dev *dev, struct pci_board_no_ids *board, int enable) .base_baud = 921600,
{ .uart_offset = 8,
return pci_siig10x_fn(dev, enable); },
} [titan_210l] = {
.flags = FL_BASE1 | FL_BASE_BARS,
static int __devinit siig20x_init_fn(struct pci_dev *dev, struct pci_board_no_ids *board, int enable) .num_ports = 2,
{ .base_baud = 921600,
return pci_siig20x_fn(dev, enable); .uart_offset = 8,
} },
[netmos_9xx5_combo] = {
static int __devinit netmos_serial_init(struct pci_dev *dev, struct pci_board_no_ids *board, int enable) .flags = FL_BASE0 | FL_BASE_BARS,
{ .num_ports = 1,
board->num_ports = dev->subsystem_device & 0xf; .base_baud = 115200,
return 0; .uart_offset = 8,
} },
[netmos_9855] = {
static struct pci_board_no_ids pci_boards[] __devinitdata = { .flags = FL_BASE2 | FL_BASE_BARS,
/* .num_ports = 1,
* PCI Flags, Number of Ports, Base (Maximum) Baud Rate, .base_baud = 115200,
* Offset to get to next UART's registers, .uart_offset = 8,
* Register shift to use for memory-mapped I/O, },
* Initialization function, first UART offset [avlab_1s1p] = { /* n/t */
*/ .flags = FL_BASE0 | FL_BASE_BARS,
.num_ports = 1,
// Cards not tested are marked n/t .base_baud = 115200,
// If you have one of these cards and it works for you, please tell me.. .uart_offset = 8,
},
/* titan_110l */ { SPCI_FL_BASE1 | SPCI_FL_BASE_TABLE, 1, 921600 }, [avlab_1s1p_650] = { /* nt */
/* titan_210l */ { SPCI_FL_BASE1 | SPCI_FL_BASE_TABLE, 2, 921600 }, .flags = FL_BASE0 | FL_BASE_BARS,
/* netmos_9xx5_combo */ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200, 0, 0, netmos_serial_init }, .num_ports = 1,
/* netmos_9855 */ { SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 1, 115200, 0, 0, netmos_serial_init }, .base_baud = 115200,
/* avlab_1s1p (n/t) */ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 }, .uart_offset = 8,
/* avlab_1s1p_650 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 }, },
/* avlab_1s1p_850 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 }, [avlab_1s1p_850] = { /* nt */
/* avlab_1s2p (n/t) */ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 }, .flags = FL_BASE0 | FL_BASE_BARS,
/* avlab_1s2p_650 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 }, .num_ports = 1,
/* avlab_1s2p_850 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 }, .base_baud = 115200,
/* avlab_2s1p (n/t) */ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 115200 }, .uart_offset = 8,
/* avlab_2s1p_650 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 115200 }, },
/* avlab_2s1p_850 (nt)*/{ SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 115200 }, [avlab_1s2p] = { /* n/t */
/* siig_1s1p_10x */ { SPCI_FL_BASE2, 1, 460800, 0, 0, siig10x_init_fn }, .flags = FL_BASE0 | FL_BASE_BARS,
/* siig_2s1p_10x */ { SPCI_FL_BASE2, 1, 921600, 0, 0, siig10x_init_fn }, .num_ports = 1,
/* siig_2p1s_20x */ { SPCI_FL_BASE0, 1, 921600, 0, 0, siig20x_init_fn }, .base_baud = 115200,
/* siig_1s1p_20x */ { SPCI_FL_BASE0, 1, 921600, 0, 0, siig20x_init_fn }, .uart_offset = 8,
/* siig_2s1p_20x */ { SPCI_FL_BASE0, 1, 921600, 0, 0, siig20x_init_fn }, },
[avlab_1s2p_650] = { /* nt */
.flags = FL_BASE0 | FL_BASE_BARS,
.num_ports = 1,
.base_baud = 115200,
.uart_offset = 8,
},
[avlab_1s2p_850] = { /* nt */
.flags = FL_BASE0 | FL_BASE_BARS,
.num_ports = 1,
.base_baud = 115200,
.uart_offset = 8,
},
[avlab_2s1p] = { /* n/t */
.flags = FL_BASE0 | FL_BASE_BARS,
.num_ports = 2,
.base_baud = 115200,
.uart_offset = 8,
},
[avlab_2s1p_650] = { /* nt */
.flags = FL_BASE0 | FL_BASE_BARS,
.num_ports = 2,
.base_baud = 115200,
.uart_offset = 8,
},
[avlab_2s1p_850] = { /* nt */
.flags = FL_BASE0 | FL_BASE_BARS,
.num_ports = 2,
.base_baud = 115200,
.uart_offset = 8,
},
[siig_1s1p_10x] = {
.flags = FL_BASE2,
.num_ports = 1,
.base_baud = 460800,
.uart_offset = 8,
},
[siig_2s1p_10x] = {
.flags = FL_BASE2,
.num_ports = 1,
.base_baud = 921600,
.uart_offset = 8,
},
[siig_2p1s_20x] = {
.flags = FL_BASE0,
.num_ports = 1,
.base_baud = 921600,
.uart_offset = 8,
},
[siig_1s1p_20x] = {
.flags = FL_BASE0,
.num_ports = 1,
.base_baud = 921600,
.uart_offset = 8,
},
[siig_2s1p_20x] = {
.flags = FL_BASE0,
.num_ports = 1,
.base_baud = 921600,
.uart_offset = 8,
},
}; };
struct parport_serial_private { struct parport_serial_private {
int num_ser; struct serial_private *serial;
int line[20];
struct pci_board_no_ids ser;
int num_par; int num_par;
struct parport *port[PARPORT_MAX]; struct parport *port[PARPORT_MAX];
struct parport_pc_pci par; struct parport_pc_pci par;
}; };
static int __devinit get_pci_port (struct pci_dev *dev,
struct pci_board_no_ids *board,
struct serial_struct *req,
int idx)
{
unsigned long port;
int base_idx;
int max_port;
int offset;
base_idx = SPCI_FL_GET_BASE(board->flags);
if (board->flags & SPCI_FL_BASE_TABLE)
base_idx += idx;
if (board->flags & SPCI_FL_REGION_SZ_CAP) {
max_port = pci_resource_len(dev, base_idx) / 8;
if (idx >= max_port)
return 1;
}
offset = board->first_uart_offset;
/* Timedia/SUNIX uses a mixture of BARs and offsets */
/* Ugh, this is ugly as all hell --- TYT */
if(dev->vendor == PCI_VENDOR_ID_TIMEDIA ) /* 0x1409 */
switch(idx) {
case 0: base_idx=0;
break;
case 1: base_idx=0; offset=8;
break;
case 2: base_idx=1;
break;
case 3: base_idx=1; offset=8;
break;
case 4: /* BAR 2*/
case 5: /* BAR 3 */
case 6: /* BAR 4*/
case 7: base_idx=idx-2; /* BAR 5*/
}
port = pci_resource_start(dev, base_idx) + offset;
if ((board->flags & SPCI_FL_BASE_TABLE) == 0)
port += idx * (board->uart_offset ? board->uart_offset : 8);
if (pci_resource_flags (dev, base_idx) & IORESOURCE_IO) {
int high_bits_offset = ((sizeof(long)-sizeof(int))*8);
req->port = port;
if (high_bits_offset)
req->port_high = port >> high_bits_offset;
else
req->port_high = 0;
return 0;
}
req->io_type = SERIAL_IO_MEM;
req->iomem_base = ioremap(port, board->uart_offset);
req->iomem_reg_shift = board->reg_shift;
req->port = 0;
return req->iomem_base ? 0 : 1;
}
/* Register the serial port(s) of a PCI card. */ /* Register the serial port(s) of a PCI card. */
static int __devinit serial_register (struct pci_dev *dev, static int __devinit serial_register (struct pci_dev *dev,
const struct pci_device_id *id) const struct pci_device_id *id)
{ {
struct pci_board_no_ids *board;
struct parport_serial_private *priv = pci_get_drvdata (dev); struct parport_serial_private *priv = pci_get_drvdata (dev);
struct serial_struct serial_req; struct pciserial_board *board;
int base_baud; struct serial_private *serial;
int k;
int success = 0;
priv->ser = pci_boards[id->driver_data];
board = &priv->ser;
if (board->init_fn && ((board->init_fn) (dev, board, 1) != 0))
return 1;
base_baud = board->base_baud;
if (!base_baud)
base_baud = BASE_BAUD;
memset (&serial_req, 0, sizeof (serial_req));
for (k = 0; k < board->num_ports; k++) {
int line;
if (priv->num_ser == ARRAY_SIZE (priv->line)) { board = &pci_parport_serial_boards[id->driver_data];
printk (KERN_WARNING serial = pciserial_init_ports(dev, board);
"parport_serial: %s: only %u serial lines "
"supported (%d reported)\n", pci_name (dev),
ARRAY_SIZE (priv->line), board->num_ports);
break;
}
serial_req.irq = dev->irq; if (IS_ERR(serial))
if (get_pci_port (dev, board, &serial_req, k)) return PTR_ERR(serial);
break;
serial_req.flags = ASYNC_SKIP_TEST | ASYNC_AUTOPROBE;
serial_req.baud_base = base_baud;
line = register_serial (&serial_req);
if (line < 0) {
printk (KERN_DEBUG
"parport_serial: register_serial failed\n");
continue;
}
priv->line[priv->num_ser++] = line;
success = 1;
}
return success ? 0 : 1; priv->serial = serial;
return 0;
} }
/* Register the parallel port(s) of a PCI card. */ /* Register the parallel port(s) of a PCI card. */
...@@ -411,7 +371,7 @@ static int __devinit parport_serial_pci_probe (struct pci_dev *dev, ...@@ -411,7 +371,7 @@ static int __devinit parport_serial_pci_probe (struct pci_dev *dev,
priv = kmalloc (sizeof *priv, GFP_KERNEL); priv = kmalloc (sizeof *priv, GFP_KERNEL);
if (!priv) if (!priv)
return -ENOMEM; return -ENOMEM;
priv->num_ser = priv->num_par = 0; memset(priv, 0, sizeof(struct parport_serial_private));
pci_set_drvdata (dev, priv); pci_set_drvdata (dev, priv);
err = pci_enable_device (dev); err = pci_enable_device (dev);
...@@ -444,15 +404,12 @@ static void __devexit parport_serial_pci_remove (struct pci_dev *dev) ...@@ -444,15 +404,12 @@ static void __devexit parport_serial_pci_remove (struct pci_dev *dev)
struct parport_serial_private *priv = pci_get_drvdata (dev); struct parport_serial_private *priv = pci_get_drvdata (dev);
int i; int i;
pci_set_drvdata(dev, NULL);
// Serial ports // Serial ports
for (i = 0; i < priv->num_ser; i++) { if (priv->serial)
unregister_serial (priv->line[i]); pciserial_remove_ports(priv->serial);
if (priv->ser.init_fn)
(priv->ser.init_fn) (dev, &priv->ser, 0);
}
pci_set_drvdata (dev, NULL);
// Parallel ports // Parallel ports
for (i = 0; i < priv->num_par; i++) for (i = 0; i < priv->num_par; i++)
parport_pc_unregister_port (priv->port[i]); parport_pc_unregister_port (priv->port[i]);
...@@ -461,11 +418,47 @@ static void __devexit parport_serial_pci_remove (struct pci_dev *dev) ...@@ -461,11 +418,47 @@ static void __devexit parport_serial_pci_remove (struct pci_dev *dev)
return; return;
} }
static int parport_serial_pci_suspend(struct pci_dev *dev, pm_message_t state)
{
struct parport_serial_private *priv = pci_get_drvdata(dev);
if (priv->serial)
pciserial_suspend_ports(priv->serial);
/* FIXME: What about parport? */
pci_save_state(dev);
pci_set_power_state(dev, pci_choose_state(dev, state));
return 0;
}
static int parport_serial_pci_resume(struct pci_dev *dev)
{
struct parport_serial_private *priv = pci_get_drvdata(dev);
pci_set_power_state(dev, PCI_D0);
pci_restore_state(dev);
/*
* The device may have been disabled. Re-enable it.
*/
pci_enable_device(dev);
if (priv->serial)
pciserial_resume_ports(priv->serial);
/* FIXME: What about parport? */
return 0;
}
static struct pci_driver parport_serial_pci_driver = { static struct pci_driver parport_serial_pci_driver = {
.name = "parport_serial", .name = "parport_serial",
.id_table = parport_serial_pci_tbl, .id_table = parport_serial_pci_tbl,
.probe = parport_serial_pci_probe, .probe = parport_serial_pci_probe,
.remove = __devexit_p(parport_serial_pci_remove), .remove = __devexit_p(parport_serial_pci_remove),
.suspend = parport_serial_pci_suspend,
.resume = parport_serial_pci_resume,
}; };
......
drivers/serial/8250_pci.c
浏览文件 @ 975f957d
...@@ -33,36 +33,6 @@ ...@@ -33,36 +33,6 @@
#undef SERIAL_DEBUG_PCI #undef SERIAL_DEBUG_PCI
/*
* Definitions for PCI support.
*/
#define FL_BASE_MASK 0x0007
#define FL_BASE0 0x0000
#define FL_BASE1 0x0001
#define FL_BASE2 0x0002
#define FL_BASE3 0x0003
#define FL_BASE4 0x0004
#define FL_GET_BASE(x) (x & FL_BASE_MASK)
/* Use successive BARs (PCI base address registers),
else use offset into some specified BAR */
#define FL_BASE_BARS 0x0008
/* do not assign an irq */
#define FL_NOIRQ 0x0080
/* Use the Base address register size to cap number of ports */
#define FL_REGION_SZ_CAP 0x0100
struct pci_board {
unsigned int flags;
unsigned int num_ports;
unsigned int base_baud;
unsigned int uart_offset;
unsigned int reg_shift;
unsigned int first_offset;
};
/* /*
* init function returns: * init function returns:
* > 0 - number of ports * > 0 - number of ports
...@@ -75,14 +45,15 @@ struct pci_serial_quirk { ...@@ -75,14 +45,15 @@ struct pci_serial_quirk {
u32 subvendor; u32 subvendor;
u32 subdevice; u32 subdevice;
int (*init)(struct pci_dev *dev); int (*init)(struct pci_dev *dev);
int (*setup)(struct pci_dev *dev, struct pci_board *board, int (*setup)(struct serial_private *, struct pciserial_board *,
struct uart_port *port, int idx); struct uart_port *, int);
void (*exit)(struct pci_dev *dev); void (*exit)(struct pci_dev *dev);
}; };
#define PCI_NUM_BAR_RESOURCES 6 #define PCI_NUM_BAR_RESOURCES 6
struct serial_private { struct serial_private {
struct pci_dev *dev;
unsigned int nr; unsigned int nr;
void __iomem *remapped_bar[PCI_NUM_BAR_RESOURCES]; void __iomem *remapped_bar[PCI_NUM_BAR_RESOURCES];
struct pci_serial_quirk *quirk; struct pci_serial_quirk *quirk;
...@@ -101,17 +72,18 @@ static void moan_device(const char *str, struct pci_dev *dev) ...@@ -101,17 +72,18 @@ static void moan_device(const char *str, struct pci_dev *dev)
} }
static int static int
setup_port(struct pci_dev *dev, struct uart_port *port, setup_port(struct serial_private *priv, struct uart_port *port,
int bar, int offset, int regshift) int bar, int offset, int regshift)
{ {
struct serial_private *priv = pci_get_drvdata(dev); struct pci_dev *dev = priv->dev;
unsigned long base, len; unsigned long base, len;
if (bar >= PCI_NUM_BAR_RESOURCES) if (bar >= PCI_NUM_BAR_RESOURCES)
return -EINVAL; return -EINVAL;
base = pci_resource_start(dev, bar);
if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) { if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) {
base = pci_resource_start(dev, bar);
len = pci_resource_len(dev, bar); len = pci_resource_len(dev, bar);
if (!priv->remapped_bar[bar]) if (!priv->remapped_bar[bar])
...@@ -120,13 +92,16 @@ setup_port(struct pci_dev *dev, struct uart_port *port, ...@@ -120,13 +92,16 @@ setup_port(struct pci_dev *dev, struct uart_port *port,
return -ENOMEM; return -ENOMEM;
port->iotype = UPIO_MEM; port->iotype = UPIO_MEM;
port->iobase = 0;
port->mapbase = base + offset; port->mapbase = base + offset;
port->membase = priv->remapped_bar[bar] + offset; port->membase = priv->remapped_bar[bar] + offset;
port->regshift = regshift; port->regshift = regshift;
} else { } else {
base = pci_resource_start(dev, bar) + offset;
port->iotype = UPIO_PORT; port->iotype = UPIO_PORT;
port->iobase = base; port->iobase = base + offset;
port->mapbase = 0;
port->membase = NULL;
port->regshift = 0;
} }
return 0; return 0;
} }
...@@ -136,7 +111,7 @@ setup_port(struct pci_dev *dev, struct uart_port *port, ...@@ -136,7 +111,7 @@ setup_port(struct pci_dev *dev, struct uart_port *port,
* Not that ugly ;) -- HW * Not that ugly ;) -- HW
*/ */
static int static int
afavlab_setup(struct pci_dev *dev, struct pci_board *board, afavlab_setup(struct serial_private *priv, struct pciserial_board *board,
struct uart_port *port, int idx) struct uart_port *port, int idx)
{ {
unsigned int bar, offset = board->first_offset; unsigned int bar, offset = board->first_offset;
...@@ -149,7 +124,7 @@ afavlab_setup(struct pci_dev *dev, struct pci_board *board, ...@@ -149,7 +124,7 @@ afavlab_setup(struct pci_dev *dev, struct pci_board *board,
offset += (idx - 4) * board->uart_offset; offset += (idx - 4) * board->uart_offset;
} }
return setup_port(dev, port, bar, offset, board->reg_shift); return setup_port(priv, port, bar, offset, board->reg_shift);
} }
/* /*
...@@ -189,13 +164,13 @@ static int __devinit pci_hp_diva_init(struct pci_dev *dev) ...@@ -189,13 +164,13 @@ static int __devinit pci_hp_diva_init(struct pci_dev *dev)
* some serial ports are supposed to be hidden on certain models. * some serial ports are supposed to be hidden on certain models.
*/ */
static int static int
pci_hp_diva_setup(struct pci_dev *dev, struct pci_board *board, pci_hp_diva_setup(struct serial_private *priv, struct pciserial_board *board,
struct uart_port *port, int idx) struct uart_port *port, int idx)
{ {
unsigned int offset = board->first_offset; unsigned int offset = board->first_offset;
unsigned int bar = FL_GET_BASE(board->flags); unsigned int bar = FL_GET_BASE(board->flags);
switch (dev->subsystem_device) { switch (priv->dev->subsystem_device) {
case PCI_DEVICE_ID_HP_DIVA_MAESTRO: case PCI_DEVICE_ID_HP_DIVA_MAESTRO:
if (idx == 3) if (idx == 3)
idx++; idx++;
...@@ -212,7 +187,7 @@ pci_hp_diva_setup(struct pci_dev *dev, struct pci_board *board, ...@@ -212,7 +187,7 @@ pci_hp_diva_setup(struct pci_dev *dev, struct pci_board *board,
offset += idx * board->uart_offset; offset += idx * board->uart_offset;
return setup_port(dev, port, bar, offset, board->reg_shift); return setup_port(priv, port, bar, offset, board->reg_shift);
} }
/* /*
...@@ -307,7 +282,7 @@ static void __devexit pci_plx9050_exit(struct pci_dev *dev) ...@@ -307,7 +282,7 @@ static void __devexit pci_plx9050_exit(struct pci_dev *dev)
/* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */ /* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */
static int static int
sbs_setup(struct pci_dev *dev, struct pci_board *board, sbs_setup(struct serial_private *priv, struct pciserial_board *board,
struct uart_port *port, int idx) struct uart_port *port, int idx)
{ {
unsigned int bar, offset = board->first_offset; unsigned int bar, offset = board->first_offset;
...@@ -323,7 +298,7 @@ sbs_setup(struct pci_dev *dev, struct pci_board *board, ...@@ -323,7 +298,7 @@ sbs_setup(struct pci_dev *dev, struct pci_board *board,
} else /* we have only 8 ports on PMC-OCTALPRO */ } else /* we have only 8 ports on PMC-OCTALPRO */
return 1; return 1;
return setup_port(dev, port, bar, offset, board->reg_shift); return setup_port(priv, port, bar, offset, board->reg_shift);
} }
/* /*
...@@ -389,6 +364,9 @@ static void __devexit sbs_exit(struct pci_dev *dev) ...@@ -389,6 +364,9 @@ static void __devexit sbs_exit(struct pci_dev *dev)
* - 10x cards have control registers in IO and/or memory space; * - 10x cards have control registers in IO and/or memory space;
* - 20x cards have control registers in standard PCI configuration space. * - 20x cards have control registers in standard PCI configuration space.
* *
* Note: all 10x cards have PCI device ids 0x10..
* all 20x cards have PCI device ids 0x20..
*
* There are also Quartet Serial cards which use Oxford Semiconductor * There are also Quartet Serial cards which use Oxford Semiconductor
* 16954 quad UART PCI chip clocked by 18.432 MHz quartz. * 16954 quad UART PCI chip clocked by 18.432 MHz quartz.
* *
...@@ -445,24 +423,18 @@ static int pci_siig20x_init(struct pci_dev *dev) ...@@ -445,24 +423,18 @@ static int pci_siig20x_init(struct pci_dev *dev)
return 0; return 0;
} }
int pci_siig10x_fn(struct pci_dev *dev, int enable) static int pci_siig_init(struct pci_dev *dev)
{ {
int ret = 0; unsigned int type = dev->device & 0xff00;
if (enable)
ret = pci_siig10x_init(dev);
return ret;
}
int pci_siig20x_fn(struct pci_dev *dev, int enable) if (type == 0x1000)
{ return pci_siig10x_init(dev);
int ret = 0; else if (type == 0x2000)
if (enable) return pci_siig20x_init(dev);
ret = pci_siig20x_init(dev);
return ret;
}
EXPORT_SYMBOL(pci_siig10x_fn); moan_device("Unknown SIIG card", dev);
EXPORT_SYMBOL(pci_siig20x_fn); return -ENODEV;
}
/* /*
* Timedia has an explosion of boards, and to avoid the PCI table from * Timedia has an explosion of boards, and to avoid the PCI table from
...@@ -523,7 +495,7 @@ static int __devinit pci_timedia_init(struct pci_dev *dev) ...@@ -523,7 +495,7 @@ static int __devinit pci_timedia_init(struct pci_dev *dev)
* Ugh, this is ugly as all hell --- TYT * Ugh, this is ugly as all hell --- TYT
*/ */
static int static int
pci_timedia_setup(struct pci_dev *dev, struct pci_board *board, pci_timedia_setup(struct serial_private *priv, struct pciserial_board *board,
struct uart_port *port, int idx) struct uart_port *port, int idx)
{ {
unsigned int bar = 0, offset = board->first_offset; unsigned int bar = 0, offset = board->first_offset;
...@@ -549,14 +521,15 @@ pci_timedia_setup(struct pci_dev *dev, struct pci_board *board, ...@@ -549,14 +521,15 @@ pci_timedia_setup(struct pci_dev *dev, struct pci_board *board,
bar = idx - 2; bar = idx - 2;
} }
return setup_port(dev, port, bar, offset, board->reg_shift); return setup_port(priv, port, bar, offset, board->reg_shift);
} }
/* /*
* Some Titan cards are also a little weird * Some Titan cards are also a little weird
*/ */
static int static int
titan_400l_800l_setup(struct pci_dev *dev, struct pci_board *board, titan_400l_800l_setup(struct serial_private *priv,
struct pciserial_board *board,
struct uart_port *port, int idx) struct uart_port *port, int idx)
{ {
unsigned int bar, offset = board->first_offset; unsigned int bar, offset = board->first_offset;
...@@ -573,7 +546,7 @@ titan_400l_800l_setup(struct pci_dev *dev, struct pci_board *board, ...@@ -573,7 +546,7 @@ titan_400l_800l_setup(struct pci_dev *dev, struct pci_board *board,
offset = (idx - 2) * board->uart_offset; offset = (idx - 2) * board->uart_offset;
} }
return setup_port(dev, port, bar, offset, board->reg_shift); return setup_port(priv, port, bar, offset, board->reg_shift);
} }
static int __devinit pci_xircom_init(struct pci_dev *dev) static int __devinit pci_xircom_init(struct pci_dev *dev)
...@@ -593,7 +566,7 @@ static int __devinit pci_netmos_init(struct pci_dev *dev) ...@@ -593,7 +566,7 @@ static int __devinit pci_netmos_init(struct pci_dev *dev)
} }
static int static int
pci_default_setup(struct pci_dev *dev, struct pci_board *board, pci_default_setup(struct serial_private *priv, struct pciserial_board *board,
struct uart_port *port, int idx) struct uart_port *port, int idx)
{ {
unsigned int bar, offset = board->first_offset, maxnr; unsigned int bar, offset = board->first_offset, maxnr;
...@@ -604,13 +577,13 @@ pci_default_setup(struct pci_dev *dev, struct pci_board *board, ...@@ -604,13 +577,13 @@ pci_default_setup(struct pci_dev *dev, struct pci_board *board,
else else
offset += idx * board->uart_offset; offset += idx * board->uart_offset;
maxnr = (pci_resource_len(dev, bar) - board->first_offset) / maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) /
(8 << board->reg_shift); (8 << board->reg_shift);
if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr) if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr)
return 1; return 1;
return setup_port(dev, port, bar, offset, board->reg_shift); return setup_port(priv, port, bar, offset, board->reg_shift);
} }
/* This should be in linux/pci_ids.h */ /* This should be in linux/pci_ids.h */
...@@ -754,152 +727,15 @@ static struct pci_serial_quirk pci_serial_quirks[] = { ...@@ -754,152 +727,15 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
.setup = sbs_setup, .setup = sbs_setup,
.exit = __devexit_p(sbs_exit), .exit = __devexit_p(sbs_exit),
}, },
/* /*
* SIIG cards. * SIIG cards.
* It is not clear whether these could be collapsed.
*/ */
{ {
.vendor = PCI_VENDOR_ID_SIIG, .vendor = PCI_VENDOR_ID_SIIG,
.device = PCI_DEVICE_ID_SIIG_1S_10x_550, .device = PCI_ANY_ID,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_siig10x_init,
.setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_SIIG,
.device = PCI_DEVICE_ID_SIIG_1S_10x_650,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_siig10x_init,
.setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_SIIG,
.device = PCI_DEVICE_ID_SIIG_1S_10x_850,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_siig10x_init,
.setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_SIIG,
.device = PCI_DEVICE_ID_SIIG_2S_10x_550,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_siig10x_init,
.setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_SIIG,
.device = PCI_DEVICE_ID_SIIG_2S_10x_650,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_siig10x_init,
.setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_SIIG,
.device = PCI_DEVICE_ID_SIIG_2S_10x_850,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_siig10x_init,
.setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_SIIG,
.device = PCI_DEVICE_ID_SIIG_4S_10x_550,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_siig10x_init,
.setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_SIIG,
.device = PCI_DEVICE_ID_SIIG_4S_10x_650,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_siig10x_init,
.setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_SIIG,
.device = PCI_DEVICE_ID_SIIG_4S_10x_850,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_siig10x_init,
.setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_SIIG,
.device = PCI_DEVICE_ID_SIIG_1S_20x_550,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_siig20x_init,
.setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_SIIG,
.device = PCI_DEVICE_ID_SIIG_1S_20x_650,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_siig20x_init,
.setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_SIIG,
.device = PCI_DEVICE_ID_SIIG_1S_20x_850,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_siig20x_init,
.setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_SIIG,
.device = PCI_DEVICE_ID_SIIG_2S_20x_550,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_siig20x_init,
.setup = pci_default_setup,
},
{ .vendor = PCI_VENDOR_ID_SIIG,
.device = PCI_DEVICE_ID_SIIG_2S_20x_650,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_siig20x_init,
.setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_SIIG,
.device = PCI_DEVICE_ID_SIIG_2S_20x_850,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_siig20x_init,
.setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_SIIG,
.device = PCI_DEVICE_ID_SIIG_4S_20x_550,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_siig20x_init,
.setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_SIIG,
.device = PCI_DEVICE_ID_SIIG_4S_20x_650,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.init = pci_siig20x_init,
.setup = pci_default_setup,
},
{
.vendor = PCI_VENDOR_ID_SIIG,
.device = PCI_DEVICE_ID_SIIG_4S_20x_850,
.subvendor = PCI_ANY_ID, .subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID, .subdevice = PCI_ANY_ID,
.init = pci_siig20x_init, .init = pci_siig_init,
.setup = pci_default_setup, .setup = pci_default_setup,
}, },
/* /*
...@@ -990,7 +826,7 @@ static struct pci_serial_quirk *find_quirk(struct pci_dev *dev) ...@@ -990,7 +826,7 @@ static struct pci_serial_quirk *find_quirk(struct pci_dev *dev)
} }
static _INLINE_ int static _INLINE_ int
get_pci_irq(struct pci_dev *dev, struct pci_board *board, int idx) get_pci_irq(struct pci_dev *dev, struct pciserial_board *board)
{ {
if (board->flags & FL_NOIRQ) if (board->flags & FL_NOIRQ)
return 0; return 0;
...@@ -1115,7 +951,7 @@ enum pci_board_num_t { ...@@ -1115,7 +951,7 @@ enum pci_board_num_t {
* see first lines of serial_in() and serial_out() in 8250.c * see first lines of serial_in() and serial_out() in 8250.c
*/ */
static struct pci_board pci_boards[] __devinitdata = { static struct pciserial_board pci_boards[] __devinitdata = {
[pbn_default] = { [pbn_default] = {
.flags = FL_BASE0, .flags = FL_BASE0,
.num_ports = 1, .num_ports = 1,
...@@ -1575,7 +1411,7 @@ static struct pci_board pci_boards[] __devinitdata = { ...@@ -1575,7 +1411,7 @@ static struct pci_board pci_boards[] __devinitdata = {
* serial specs. Returns 0 on success, 1 on failure. * serial specs. Returns 0 on success, 1 on failure.
*/ */
static int __devinit static int __devinit
serial_pci_guess_board(struct pci_dev *dev, struct pci_board *board) serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board)
{ {
int num_iomem, num_port, first_port = -1, i; int num_iomem, num_port, first_port = -1, i;
...@@ -1640,7 +1476,8 @@ serial_pci_guess_board(struct pci_dev *dev, struct pci_board *board) ...@@ -1640,7 +1476,8 @@ serial_pci_guess_board(struct pci_dev *dev, struct pci_board *board)
} }
static inline int static inline int
serial_pci_matches(struct pci_board *board, struct pci_board *guessed) serial_pci_matches(struct pciserial_board *board,
struct pciserial_board *guessed)
{ {
return return
board->num_ports == guessed->num_ports && board->num_ports == guessed->num_ports &&
...@@ -1650,58 +1487,14 @@ serial_pci_matches(struct pci_board *board, struct pci_board *guessed) ...@@ -1650,58 +1487,14 @@ serial_pci_matches(struct pci_board *board, struct pci_board *guessed)
board->first_offset == guessed->first_offset; board->first_offset == guessed->first_offset;
} }
/* struct serial_private *
* Probe one serial board. Unfortunately, there is no rhyme nor reason pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board)
* to the arrangement of serial ports on a PCI card.
*/
static int __devinit
pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
{ {
struct uart_port serial_port;
struct serial_private *priv; struct serial_private *priv;
struct pci_board *board, tmp;
struct pci_serial_quirk *quirk; struct pci_serial_quirk *quirk;
int rc, nr_ports, i; int rc, nr_ports, i;
if (ent->driver_data >= ARRAY_SIZE(pci_boards)) {
printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n",
ent->driver_data);
return -EINVAL;
}
board = &pci_boards[ent->driver_data];
rc = pci_enable_device(dev);
if (rc)
return rc;
if (ent->driver_data == pbn_default) {
/*
* Use a copy of the pci_board entry for this;
* avoid changing entries in the table.
*/
memcpy(&tmp, board, sizeof(struct pci_board));
board = &tmp;
/*
* We matched one of our class entries. Try to
* determine the parameters of this board.
*/
rc = serial_pci_guess_board(dev, board);
if (rc)
goto disable;
} else {
/*
* We matched an explicit entry. If we are able to
* detect this boards settings with our heuristic,
* then we no longer need this entry.
*/
memcpy(&tmp, &pci_boards[pbn_default], sizeof(struct pci_board));
rc = serial_pci_guess_board(dev, &tmp);
if (rc == 0 && serial_pci_matches(board, &tmp))
moan_device("Redundant entry in serial pci_table.",
dev);
}
nr_ports = board->num_ports; nr_ports = board->num_ports;
/* /*
...@@ -1718,8 +1511,10 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) ...@@ -1718,8 +1511,10 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
*/ */
if (quirk->init) { if (quirk->init) {
rc = quirk->init(dev); rc = quirk->init(dev);
if (rc < 0) if (rc < 0) {
goto disable; priv = ERR_PTR(rc);
goto err_out;
}
if (rc) if (rc)
nr_ports = rc; nr_ports = rc;
} }
...@@ -1728,27 +1523,26 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) ...@@ -1728,27 +1523,26 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
sizeof(unsigned int) * nr_ports, sizeof(unsigned int) * nr_ports,
GFP_KERNEL); GFP_KERNEL);
if (!priv) { if (!priv) {
rc = -ENOMEM; priv = ERR_PTR(-ENOMEM);
goto deinit; goto err_deinit;
} }
memset(priv, 0, sizeof(struct serial_private) + memset(priv, 0, sizeof(struct serial_private) +
sizeof(unsigned int) * nr_ports); sizeof(unsigned int) * nr_ports);
priv->dev = dev;
priv->quirk = quirk; priv->quirk = quirk;
pci_set_drvdata(dev, priv);
memset(&serial_port, 0, sizeof(struct uart_port));
serial_port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
serial_port.uartclk = board->base_baud * 16;
serial_port.irq = get_pci_irq(dev, board);
serial_port.dev = &dev->dev;
for (i = 0; i < nr_ports; i++) { for (i = 0; i < nr_ports; i++) {
struct uart_port serial_port; if (quirk->setup(priv, board, &serial_port, i))
memset(&serial_port, 0, sizeof(struct uart_port));
serial_port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF |
UPF_SHARE_IRQ;
serial_port.uartclk = board->base_baud * 16;
serial_port.irq = get_pci_irq(dev, board, i);
serial_port.dev = &dev->dev;
if (quirk->setup(dev, board, &serial_port, i))
break; break;
#ifdef SERIAL_DEBUG_PCI #ifdef SERIAL_DEBUG_PCI
printk("Setup PCI port: port %x, irq %d, type %d\n", printk("Setup PCI port: port %x, irq %d, type %d\n",
serial_port.iobase, serial_port.irq, serial_port.iotype); serial_port.iobase, serial_port.irq, serial_port.iotype);
...@@ -1763,24 +1557,21 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) ...@@ -1763,24 +1557,21 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
priv->nr = i; priv->nr = i;
return 0; return priv;
deinit: err_deinit:
if (quirk->exit) if (quirk->exit)
quirk->exit(dev); quirk->exit(dev);
disable: err_out:
pci_disable_device(dev); return priv;
return rc;
} }
EXPORT_SYMBOL_GPL(pciserial_init_ports);
static void __devexit pciserial_remove_one(struct pci_dev *dev) void pciserial_remove_ports(struct serial_private *priv)
{ {
struct serial_private *priv = pci_get_drvdata(dev);
struct pci_serial_quirk *quirk; struct pci_serial_quirk *quirk;
int i; int i;
pci_set_drvdata(dev, NULL);
for (i = 0; i < priv->nr; i++) for (i = 0; i < priv->nr; i++)
serial8250_unregister_port(priv->line[i]); serial8250_unregister_port(priv->line[i]);
...@@ -1793,25 +1584,123 @@ static void __devexit pciserial_remove_one(struct pci_dev *dev) ...@@ -1793,25 +1584,123 @@ static void __devexit pciserial_remove_one(struct pci_dev *dev)
/* /*
* Find the exit quirks. * Find the exit quirks.
*/ */
quirk = find_quirk(dev); quirk = find_quirk(priv->dev);
if (quirk->exit) if (quirk->exit)
quirk->exit(dev); quirk->exit(priv->dev);
kfree(priv);
}
EXPORT_SYMBOL_GPL(pciserial_remove_ports);
void pciserial_suspend_ports(struct serial_private *priv)
{
int i;
for (i = 0; i < priv->nr; i++)
if (priv->line[i] >= 0)
serial8250_suspend_port(priv->line[i]);
}
EXPORT_SYMBOL_GPL(pciserial_suspend_ports);
void pciserial_resume_ports(struct serial_private *priv)
{
int i;
/*
* Ensure that the board is correctly configured.
*/
if (priv->quirk->init)
priv->quirk->init(priv->dev);
for (i = 0; i < priv->nr; i++)
if (priv->line[i] >= 0)
serial8250_resume_port(priv->line[i]);
}
EXPORT_SYMBOL_GPL(pciserial_resume_ports);
/*
* Probe one serial board. Unfortunately, there is no rhyme nor reason
* to the arrangement of serial ports on a PCI card.
*/
static int __devinit
pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
{
struct serial_private *priv;
struct pciserial_board *board, tmp;
int rc;
if (ent->driver_data >= ARRAY_SIZE(pci_boards)) {
printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n",
ent->driver_data);
return -EINVAL;
}
board = &pci_boards[ent->driver_data];
rc = pci_enable_device(dev);
if (rc)
return rc;
if (ent->driver_data == pbn_default) {
/*
* Use a copy of the pci_board entry for this;
* avoid changing entries in the table.
*/
memcpy(&tmp, board, sizeof(struct pciserial_board));
board = &tmp;
/*
* We matched one of our class entries. Try to
* determine the parameters of this board.
*/
rc = serial_pci_guess_board(dev, board);
if (rc)
goto disable;
} else {
/*
* We matched an explicit entry. If we are able to
* detect this boards settings with our heuristic,
* then we no longer need this entry.
*/
memcpy(&tmp, &pci_boards[pbn_default],
sizeof(struct pciserial_board));
rc = serial_pci_guess_board(dev, &tmp);
if (rc == 0 && serial_pci_matches(board, &tmp))
moan_device("Redundant entry in serial pci_table.",
dev);
}
priv = pciserial_init_ports(dev, board);
if (!IS_ERR(priv)) {
pci_set_drvdata(dev, priv);
return 0;
}
rc = PTR_ERR(priv);
disable:
pci_disable_device(dev); pci_disable_device(dev);
return rc;
}
kfree(priv); static void __devexit pciserial_remove_one(struct pci_dev *dev)
{
struct serial_private *priv = pci_get_drvdata(dev);
pci_set_drvdata(dev, NULL);
pciserial_remove_ports(priv);
pci_disable_device(dev);
} }
static int pciserial_suspend_one(struct pci_dev *dev, pm_message_t state) static int pciserial_suspend_one(struct pci_dev *dev, pm_message_t state)
{ {
struct serial_private *priv = pci_get_drvdata(dev); struct serial_private *priv = pci_get_drvdata(dev);
if (priv) { if (priv)
int i; pciserial_suspend_ports(priv);
for (i = 0; i < priv->nr; i++)
serial8250_suspend_port(priv->line[i]);
}
pci_save_state(dev); pci_save_state(dev);
pci_set_power_state(dev, pci_choose_state(dev, state)); pci_set_power_state(dev, pci_choose_state(dev, state));
return 0; return 0;
...@@ -1825,21 +1714,12 @@ static int pciserial_resume_one(struct pci_dev *dev) ...@@ -1825,21 +1714,12 @@ static int pciserial_resume_one(struct pci_dev *dev)
pci_restore_state(dev); pci_restore_state(dev);
if (priv) { if (priv) {
int i;
/* /*
* The device may have been disabled. Re-enable it. * The device may have been disabled. Re-enable it.
*/ */
pci_enable_device(dev); pci_enable_device(dev);
/* pciserial_resume_ports(priv);
* Ensure that the board is correctly configured.
*/
if (priv->quirk->init)
priv->quirk->init(dev);
for (i = 0; i < priv->nr; i++)
serial8250_resume_port(priv->line[i]);
} }
return 0; return 0;
} }
......
include/linux/8250_pci.h
浏览文件 @ 975f957d
int pci_siig10x_fn(struct pci_dev *dev, int enable); /*
int pci_siig20x_fn(struct pci_dev *dev, int enable); * Definitions for PCI support.
*/
#define FL_BASE_MASK 0x0007
#define FL_BASE0 0x0000
#define FL_BASE1 0x0001
#define FL_BASE2 0x0002
#define FL_BASE3 0x0003
#define FL_BASE4 0x0004
#define FL_GET_BASE(x) (x & FL_BASE_MASK)
/* Use successive BARs (PCI base address registers),
else use offset into some specified BAR */
#define FL_BASE_BARS 0x0008
/* do not assign an irq */
#define FL_NOIRQ 0x0080
/* Use the Base address register size to cap number of ports */
#define FL_REGION_SZ_CAP 0x0100
struct pciserial_board {
unsigned int flags;
unsigned int num_ports;
unsigned int base_baud;
unsigned int uart_offset;
unsigned int reg_shift;
unsigned int first_offset;
};
struct serial_private;
struct serial_private *
pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board);
void pciserial_remove_ports(struct serial_private *priv);
void pciserial_suspend_ports(struct serial_private *priv);
void pciserial_resume_ports(struct serial_private *priv);
include/linux/serialP.h
浏览文件 @ 975f957d
...@@ -140,44 +140,4 @@ struct rs_multiport_struct { ...@@ -140,44 +140,4 @@ struct rs_multiport_struct {
#define ALPHA_KLUDGE_MCR 0 #define ALPHA_KLUDGE_MCR 0
#endif #endif
/*
* Definitions for PCI support.
*/
#define SPCI_FL_BASE_MASK 0x0007
#define SPCI_FL_BASE0 0x0000
#define SPCI_FL_BASE1 0x0001
#define SPCI_FL_BASE2 0x0002
#define SPCI_FL_BASE3 0x0003
#define SPCI_FL_BASE4 0x0004
#define SPCI_FL_GET_BASE(x) (x & SPCI_FL_BASE_MASK)
#define SPCI_FL_IRQ_MASK (0x0007 << 4)
#define SPCI_FL_IRQBASE0 (0x0000 << 4)
#define SPCI_FL_IRQBASE1 (0x0001 << 4)
#define SPCI_FL_IRQBASE2 (0x0002 << 4)
#define SPCI_FL_IRQBASE3 (0x0003 << 4)
#define SPCI_FL_IRQBASE4 (0x0004 << 4)
#define SPCI_FL_GET_IRQBASE(x) ((x & SPCI_FL_IRQ_MASK) >> 4)
/* Use successive BARs (PCI base address registers),
else use offset into some specified BAR */
#define SPCI_FL_BASE_TABLE 0x0100
/* Use successive entries in the irq resource table */
#define SPCI_FL_IRQ_TABLE 0x0200
/* Use the irq resource table instead of dev->irq */
#define SPCI_FL_IRQRESOURCE 0x0400
/* Use the Base address register size to cap number of ports */
#define SPCI_FL_REGION_SZ_CAP 0x0800
/* Do not use irq sharing for this device */
#define SPCI_FL_NO_SHIRQ 0x1000
/* This is a PNP device */
#define SPCI_FL_ISPNP 0x2000
#define SPCI_FL_PNPDEFAULT (SPCI_FL_IRQRESOURCE|SPCI_FL_ISPNP)
#endif /* _LINUX_SERIAL_H */ #endif /* _LINUX_SERIAL_H */
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或