From 931db7d6880027bb2b6b0cb78a488ab1486e28b7 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sat, 29 Oct 2005 16:28:26 +0100 Subject: [PATCH] [ARM] 3050/1: remove ixp2000_reg_write erratum #66 workaround Patch from Lennert Buytenhek The workaround that we do for avoiding triggering ixp2400 erratum #66 involves mapping I/O pages using XCB=101 instead of XCB=000 so that we prevent the I/O signal to the gasket from being asserted (which can cause data corruption.) But XCB=101 mappings are write-buffered while mappings using XCB=000 are not, which is why if we use XCB=101 mappings we do a readback for every CSR store in an attempt to make sure that the store has been pushed out of the xscale core and the gasket. Unfortunately, there are two issues with this: - we do a readback for every CSR store, which is wrong, because the register we are writing to might have unwanted side-effects on read, for example, in the case of the scratchpad ring enqueue/dequeue registers; and - the readback is totally ineffective in the way we currently do it, because we just issue a load but do not issue any instruction that depends on the return value of that load, so the xscale core does not wait for the load to complete before continuing. See this linux-arm-kernel mailing list post for further information: http://lists.arm.linux.org.uk/pipermail/linux-arm-kernel/2005-September/031314.html This means that my ixp2400 boxes have been running for many months without a working readback in ixp2000_reg_write, without any apparent adverse effects. Two of them have been running for a week now with the actual readback deleted from ixp2000_reg_write, also without any apparent ill effects. So, because in its current form it does more harm than good, the readback in ixp2000_reg_write should simply be killed, as the patch below does. Signed-off-by: Lennert Buytenhek Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- include/asm-arm/arch-ixp2000/platform.h | 29 ------------------------- 1 file changed, 29 deletions(-) diff --git a/include/asm-arm/arch-ixp2000/platform.h b/include/asm-arm/arch-ixp2000/platform.h index abdcf51bd283..aabeef2454dd 100644 --- a/include/asm-arm/arch-ixp2000/platform.h +++ b/include/asm-arm/arch-ixp2000/platform.h @@ -15,39 +15,10 @@ #ifndef __ASSEMBLY__ -/* - * The IXP2400 B0 silicon contains an erratum (#66) that causes writes - * to on-chip I/O register to not complete fully. What this means is - * that if you have a write to on-chip I/O followed by a back-to-back - * read or write, the first write will happen twice. OR...if it's - * not a back-to-back transaction, the read or write will generate - * incorrect data. - * - * The official work around for this is to set the on-chip I/O regions - * as XCB=101 and then force a read-back from the register. - * - */ -#if defined(CONFIG_ARCH_ENP2611) || defined(CONFIG_ARCH_IXDP2400) || defined(CONFIG_ARCH_IXDP2401) - -#include /* Pickup local_irq_ functions */ - -static inline void ixp2000_reg_write(volatile void *reg, unsigned long val) -{ - unsigned long dummy; - unsigned long flags; - - local_irq_save(flags); - *((volatile unsigned long *)reg) = val; - barrier(); - dummy = *((volatile unsigned long *)reg); - local_irq_restore(flags); -} -#else static inline void ixp2000_reg_write(volatile void *reg, unsigned long val) { *((volatile unsigned long *)reg) = val; } -#endif /* IXDP2400 || IXDP2401 */ #define ixp2000_reg_read(reg) (*((volatile unsigned long *)reg)) /* -- GitLab