提交 918f3a0e 编写于 作者: C Clemens Ladisch 提交者: Jaroslav Kysela

[ALSA] pcm: add snd_pcm_rate_to_rate_bit() helper

Add a snd_pcm_rate_to_rate_bit() function to factor out common code used
by several drivers.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>
上级 7653d557
......@@ -925,6 +925,7 @@ snd_pcm_sframes_t snd_pcm_lib_readv(struct snd_pcm_substream *substream,
extern const struct snd_pcm_hw_constraint_list snd_pcm_known_rates;
int snd_pcm_limit_hw_rates(struct snd_pcm_runtime *runtime);
unsigned int snd_pcm_rate_to_rate_bit(unsigned int rate);
static inline void snd_pcm_set_runtime_buffer(struct snd_pcm_substream *substream,
struct snd_dma_buffer *bufp)
......
......@@ -450,3 +450,21 @@ int snd_pcm_limit_hw_rates(struct snd_pcm_runtime *runtime)
}
EXPORT_SYMBOL(snd_pcm_limit_hw_rates);
/**
* snd_pcm_rate_to_rate_bit - converts sample rate to SNDRV_PCM_RATE_xxx bit
* @rate: the sample rate to convert
*
* Returns the SNDRV_PCM_RATE_xxx flag that corresponds to the given rate, or
* SNDRV_PCM_RATE_KNOT for an unknown rate.
*/
unsigned int snd_pcm_rate_to_rate_bit(unsigned int rate)
{
unsigned int i;
for (i = 0; i < snd_pcm_known_rates.count; i++)
if (snd_pcm_known_rates.list[i] == rate)
return 1u << i;
return SNDRV_PCM_RATE_KNOT;
}
EXPORT_SYMBOL(snd_pcm_rate_to_rate_bit);
......@@ -340,28 +340,9 @@ static struct snd_pcm_hardware snd_bt87x_analog_hw = {
static int snd_bt87x_set_digital_hw(struct snd_bt87x *chip, struct snd_pcm_runtime *runtime)
{
static struct {
int rate;
unsigned int bit;
} ratebits[] = {
{8000, SNDRV_PCM_RATE_8000},
{11025, SNDRV_PCM_RATE_11025},
{16000, SNDRV_PCM_RATE_16000},
{22050, SNDRV_PCM_RATE_22050},
{32000, SNDRV_PCM_RATE_32000},
{44100, SNDRV_PCM_RATE_44100},
{48000, SNDRV_PCM_RATE_48000}
};
int i;
chip->reg_control |= CTL_DA_IOM_DA;
runtime->hw = snd_bt87x_digital_hw;
runtime->hw.rates = SNDRV_PCM_RATE_KNOT;
for (i = 0; i < ARRAY_SIZE(ratebits); ++i)
if (chip->dig_rate == ratebits[i].rate) {
runtime->hw.rates = ratebits[i].bit;
break;
}
runtime->hw.rates = snd_pcm_rate_to_rate_bit(chip->dig_rate);
runtime->hw.rate_min = chip->dig_rate;
runtime->hw.rate_max = chip->dig_rate;
return 0;
......
......@@ -258,19 +258,6 @@ static inline unsigned int snd_rme32_pcm_byteptr(struct rme32 * rme32)
& RME32_RCR_AUDIO_ADDR_MASK);
}
static int snd_rme32_ratecode(int rate)
{
switch (rate) {
case 32000: return SNDRV_PCM_RATE_32000;
case 44100: return SNDRV_PCM_RATE_44100;
case 48000: return SNDRV_PCM_RATE_48000;
case 64000: return SNDRV_PCM_RATE_64000;
case 88200: return SNDRV_PCM_RATE_88200;
case 96000: return SNDRV_PCM_RATE_96000;
}
return 0;
}
/* silence callback for halfduplex mode */
static int snd_rme32_playback_silence(struct snd_pcm_substream *substream, int channel, /* not used (interleaved data) */
snd_pcm_uframes_t pos,
......@@ -887,7 +874,7 @@ static int snd_rme32_playback_spdif_open(struct snd_pcm_substream *substream)
if ((rme32->rcreg & RME32_RCR_KMODE) &&
(rate = snd_rme32_capture_getrate(rme32, &dummy)) > 0) {
/* AutoSync */
runtime->hw.rates = snd_rme32_ratecode(rate);
runtime->hw.rates = snd_pcm_rate_to_rate_bit(rate);
runtime->hw.rate_min = rate;
runtime->hw.rate_max = rate;
}
......@@ -929,7 +916,7 @@ static int snd_rme32_capture_spdif_open(struct snd_pcm_substream *substream)
if (isadat) {
return -EIO;
}
runtime->hw.rates = snd_rme32_ratecode(rate);
runtime->hw.rates = snd_pcm_rate_to_rate_bit(rate);
runtime->hw.rate_min = rate;
runtime->hw.rate_max = rate;
}
......@@ -965,7 +952,7 @@ snd_rme32_playback_adat_open(struct snd_pcm_substream *substream)
if ((rme32->rcreg & RME32_RCR_KMODE) &&
(rate = snd_rme32_capture_getrate(rme32, &dummy)) > 0) {
/* AutoSync */
runtime->hw.rates = snd_rme32_ratecode(rate);
runtime->hw.rates = snd_pcm_rate_to_rate_bit(rate);
runtime->hw.rate_min = rate;
runtime->hw.rate_max = rate;
}
......@@ -989,7 +976,7 @@ snd_rme32_capture_adat_open(struct snd_pcm_substream *substream)
if (!isadat) {
return -EIO;
}
runtime->hw.rates = snd_rme32_ratecode(rate);
runtime->hw.rates = snd_pcm_rate_to_rate_bit(rate);
runtime->hw.rate_min = rate;
runtime->hw.rate_max = rate;
}
......
......@@ -300,20 +300,6 @@ snd_rme96_capture_ptr(struct rme96 *rme96)
& RME96_RCR_AUDIO_ADDR_MASK) >> rme96->capture_frlog;
}
static int
snd_rme96_ratecode(int rate)
{
switch (rate) {
case 32000: return SNDRV_PCM_RATE_32000;
case 44100: return SNDRV_PCM_RATE_44100;
case 48000: return SNDRV_PCM_RATE_48000;
case 64000: return SNDRV_PCM_RATE_64000;
case 88200: return SNDRV_PCM_RATE_88200;
case 96000: return SNDRV_PCM_RATE_96000;
}
return 0;
}
static int
snd_rme96_playback_silence(struct snd_pcm_substream *substream,
int channel, /* not used (interleaved data) */
......@@ -1192,7 +1178,7 @@ snd_rme96_playback_spdif_open(struct snd_pcm_substream *substream)
(rate = snd_rme96_capture_getrate(rme96, &dummy)) > 0)
{
/* slave clock */
runtime->hw.rates = snd_rme96_ratecode(rate);
runtime->hw.rates = snd_pcm_rate_to_rate_bit(rate);
runtime->hw.rate_min = rate;
runtime->hw.rate_max = rate;
}
......@@ -1219,7 +1205,7 @@ snd_rme96_capture_spdif_open(struct snd_pcm_substream *substream)
if (isadat) {
return -EIO;
}
runtime->hw.rates = snd_rme96_ratecode(rate);
runtime->hw.rates = snd_pcm_rate_to_rate_bit(rate);
runtime->hw.rate_min = rate;
runtime->hw.rate_max = rate;
}
......@@ -1259,7 +1245,7 @@ snd_rme96_playback_adat_open(struct snd_pcm_substream *substream)
(rate = snd_rme96_capture_getrate(rme96, &dummy)) > 0)
{
/* slave clock */
runtime->hw.rates = snd_rme96_ratecode(rate);
runtime->hw.rates = snd_pcm_rate_to_rate_bit(rate);
runtime->hw.rate_min = rate;
runtime->hw.rate_max = rate;
}
......@@ -1284,7 +1270,7 @@ snd_rme96_capture_adat_open(struct snd_pcm_substream *substream)
if (!isadat) {
return -EIO;
}
runtime->hw.rates = snd_rme96_ratecode(rate);
runtime->hw.rates = snd_pcm_rate_to_rate_bit(rate);
runtime->hw.rate_min = rate;
runtime->hw.rate_max = rate;
}
......
......@@ -490,35 +490,14 @@ static int snd_pmac_pcm_open(struct snd_pmac *chip, struct pmac_stream *rec,
struct snd_pcm_substream *subs)
{
struct snd_pcm_runtime *runtime = subs->runtime;
int i, j, fflags;
static int typical_freqs[] = {
44100,
22050,
11025,
0,
};
static int typical_freq_flags[] = {
SNDRV_PCM_RATE_44100,
SNDRV_PCM_RATE_22050,
SNDRV_PCM_RATE_11025,
0,
};
int i;
/* look up frequency table and fill bit mask */
runtime->hw.rates = 0;
fflags = chip->freqs_ok;
for (i = 0; typical_freqs[i]; i++) {
for (j = 0; j < chip->num_freqs; j++) {
if ((chip->freqs_ok & (1 << j)) &&
chip->freq_table[j] == typical_freqs[i]) {
runtime->hw.rates |= typical_freq_flags[i];
fflags &= ~(1 << j);
break;
}
}
}
if (fflags) /* rest */
runtime->hw.rates |= SNDRV_PCM_RATE_KNOT;
for (i = 0; i < chip->num_freqs; i++)
if (chip->freqs_ok & (1 << i))
runtime->hw.rates |=
snd_pcm_rate_to_rate_bit(chip->freq_table[i]);
/* check for minimum and maximum rates */
for (i = 0; i < chip->num_freqs; i++) {
......
......@@ -55,35 +55,6 @@ struct cs4270_private {
static unsigned int mclk_ratios[NUM_MCLK_RATIOS] =
{64, 96, 128, 192, 256, 384, 512, 768, 1024};
/*
* Sampling rate <-> bit patter mapping
*
* This array maps sampling rates to their SNDRV_PCM_RATE_x equivalent.
*
* This is really something that ALSA should provide.
*
* This table is used by cs4270_set_dai_sysclk() to tell ALSA which sampling
* rates the CS4270 currently supports.
*/
static struct {
unsigned int rate;
unsigned int bit;
} rate_map[] = {
{5512, SNDRV_PCM_RATE_5512},
{8000, SNDRV_PCM_RATE_8000},
{11025, SNDRV_PCM_RATE_11025},
{16000, SNDRV_PCM_RATE_16000},
{22050, SNDRV_PCM_RATE_22050},
{32000, SNDRV_PCM_RATE_32000},
{44100, SNDRV_PCM_RATE_44100},
{48000, SNDRV_PCM_RATE_48000},
{64000, SNDRV_PCM_RATE_64000},
{88200, SNDRV_PCM_RATE_88200},
{96000, SNDRV_PCM_RATE_96000},
{176400, SNDRV_PCM_RATE_176400},
{192000, SNDRV_PCM_RATE_192000}
};
/*
* Determine the CS4270 samples rates.
*
......@@ -126,19 +97,15 @@ static int cs4270_set_dai_sysclk(struct snd_soc_codec_dai *codec_dai,
cs4270->mclk = freq;
for (i = 0; i < NUM_MCLK_RATIOS; i++) {
unsigned int rate;
unsigned int j;
rate = freq / mclk_ratios[i];
for (j = 0; j < ARRAY_SIZE(rate_map); j++) {
if (rate == rate_map[j].rate) {
rates |= rate_map[j].bit;
unsigned int rate = freq / mclk_ratios[i];
rates |= snd_pcm_rate_to_rate_bit(rate);
if (rate < rate_min)
rate_min = rate;
if (rate > rate_max)
rate_max = rate;
}
}
}
/* FIXME: soc should support a rate list */
rates &= ~SNDRV_PCM_RATE_KNOT;
if (!rates) {
printk(KERN_ERR "cs4270: could not find a valid sample rate\n");
......
......@@ -123,7 +123,6 @@ struct audioformat {
unsigned int rate_min, rate_max; /* min/max rates */
unsigned int nr_rates; /* number of rate table entries */
unsigned int *rate_table; /* rate table */
unsigned int needs_knot; /* any unusual rates? */
};
struct snd_usb_substream;
......@@ -1761,7 +1760,7 @@ static int check_hw_params_convention(struct snd_usb_substream *subs)
channels[f->format] |= (1 << f->channels);
rates[f->format] |= f->rates;
/* needs knot? */
if (f->needs_knot)
if (f->rates & SNDRV_PCM_RATE_KNOT)
goto __out;
}
/* check whether channels and rates match for all formats */
......@@ -1817,7 +1816,7 @@ static int snd_usb_pcm_check_knot(struct snd_pcm_runtime *runtime,
if (fp->rates & SNDRV_PCM_RATE_CONTINUOUS)
return 0;
count += fp->nr_rates;
if (fp->needs_knot)
if (fp->rates & SNDRV_PCM_RATE_KNOT)
needs_knot = 1;
}
if (!needs_knot)
......@@ -2453,7 +2452,7 @@ static int parse_audio_format_rates(struct snd_usb_audio *chip, struct audioform
unsigned char *fmt, int offset)
{
int nr_rates = fmt[offset];
int found;
if (fmt[0] < offset + 1 + 3 * (nr_rates ? nr_rates : 2)) {
snd_printk(KERN_ERR "%d:%u:%d : invalid FORMAT_TYPE desc\n",
chip->dev->devnum, fp->iface, fp->altsetting);
......@@ -2464,20 +2463,15 @@ static int parse_audio_format_rates(struct snd_usb_audio *chip, struct audioform
/*
* build the rate table and bitmap flags
*/
int r, idx, c;
int r, idx;
unsigned int nonzero_rates = 0;
/* this table corresponds to the SNDRV_PCM_RATE_XXX bit */
static unsigned int conv_rates[] = {
5512, 8000, 11025, 16000, 22050, 32000, 44100, 48000,
64000, 88200, 96000, 176400, 192000
};
fp->rate_table = kmalloc(sizeof(int) * nr_rates, GFP_KERNEL);
if (fp->rate_table == NULL) {
snd_printk(KERN_ERR "cannot malloc\n");
return -1;
}
fp->needs_knot = 0;
fp->nr_rates = nr_rates;
fp->rate_min = fp->rate_max = combine_triple(&fmt[8]);
for (r = 0, idx = offset + 1; r < nr_rates; r++, idx += 3) {
......@@ -2493,23 +2487,12 @@ static int parse_audio_format_rates(struct snd_usb_audio *chip, struct audioform
fp->rate_min = rate;
else if (rate > fp->rate_max)
fp->rate_max = rate;
found = 0;
for (c = 0; c < (int)ARRAY_SIZE(conv_rates); c++) {
if (rate == conv_rates[c]) {
found = 1;
fp->rates |= (1 << c);
break;
}
}
if (!found)
fp->needs_knot = 1;
fp->rates |= snd_pcm_rate_to_rate_bit(rate);
}
if (!nonzero_rates) {
hwc_debug("All rates were zero. Skipping format!\n");
return -1;
}
if (fp->needs_knot)
fp->rates |= SNDRV_PCM_RATE_KNOT;
} else {
/* continuous rates */
fp->rates = SNDRV_PCM_RATE_CONTINUOUS;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册