Merge tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux

Pull common clk framework changes from Michael Turquette:
 "This includes a small number of core framework improvments, platform
  ports and new DT bindings."

Fix up trivial conflicts in drivers/clk/Makefile

* tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux: (21 commits)
  clk: fix compile for OF && !COMMON_CLK
  clk: fix clk_get on of_clk_get_by_name return check
  clk: mxs: clk_register_clkdev mx28 usb clocks
  clk: add highbank clock support
  dt: add clock binding doc to primecell bindings
  clk: add DT fixed-clock binding support
  clk: add DT clock binding support
  ARM: integrator: convert to common clock
  clk: add versatile ICST307 driver
  ARM: integrator: put symbolic bus names on devices
  ARM: u300: convert to common clock
  clk: cache parent clocks only for muxes
  clk: wm831x: Add initial WM831x clock driver
  clk: Constify struct clk_init_data
  clk: Add CLK_IS_BASIC flag to identify basic clocks
  clk: Add support for rate table based dividers
  clk: Add support for power of two type dividers
  clk: mxs: imx28: decrease the frequency of ref_io1 for SSP2 and SSP3
  clk: mxs: add clkdev lookup for pwm
  clk: mxs: Fix the GPMI clock name
  ...

Documentation/devicetree/bindings/arm/primecell.txt

@@ -13,11 +13,17 @@ Required properties:
 Optional properties:
 
 - arm,primecell-periphid : Value to override the h/w value with
+- clocks : From common clock binding. First clock is phandle to clock for apb
+	pclk. Additional clocks are optional and specific to those peripherals.
+- clock-names : From common clock binding. Shall be "apb_pclk" for first clock.
 
 Example:
 
 serial@fff36000 {
 	compatible = "arm,pl011", "arm,primecell";
 	arm,primecell-periphid = <0x00341011>;
+	clocks = <&pclk>;
+	clock-names = "apb_pclk";
+	
 };
 

Documentation/devicetree/bindings/clock/calxeda.txt

+Device Tree Clock bindings for Calxeda highbank platform
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+	"calxeda,hb-pll-clock" - for a PLL clock
+	"calxeda,hb-a9periph-clock" - The A9 peripheral clock divided from the
+		A9 clock.
+	"calxeda,hb-a9bus-clock" - The A9 bus clock divided from the A9 clock.
+	"calxeda,hb-emmc-clock" - Divided clock for MMC/SD controller.
+- reg : shall be the control register offset from SYSREGs base for the clock.
+- clocks : shall be the input parent clock phandle for the clock. This is
+	either an oscillator or a pll output.
+- #clock-cells : from common clock binding; shall be set to 0.

Documentation/devicetree/bindings/clock/clock-bindings.txt

+This binding is a work-in-progress, and are based on some experimental
+work by benh[1].
+
+Sources of clock signal can be represented by any node in the device
+tree.  Those nodes are designated as clock providers.  Clock consumer
+nodes use a phandle and clock specifier pair to connect clock provider
+outputs to clock inputs.  Similar to the gpio specifiers, a clock
+specifier is an array of one more more cells identifying the clock
+output on a device.  The length of a clock specifier is defined by the
+value of a #clock-cells property in the clock provider node.
+
+[1] http://patchwork.ozlabs.org/patch/31551/
+
+==Clock providers==
+
+Required properties:
+#clock-cells:	   Number of cells in a clock specifier; Typically 0 for nodes
+		   with a single clock output and 1 for nodes with multiple
+		   clock outputs.
+
+Optional properties:
+clock-output-names: Recommended to be a list of strings of clock output signal
+		    names indexed by the first cell in the clock specifier.
+		    However, the meaning of clock-output-names is domain
+		    specific to the clock provider, and is only provided to
+		    encourage using the same meaning for the majority of clock
+		    providers.  This format may not work for clock providers
+		    using a complex clock specifier format.  In those cases it
+		    is recommended to omit this property and create a binding
+		    specific names property.
+
+		    Clock consumer nodes must never directly reference
+		    the provider's clock-output-names property.
+
+For example:
+
+    oscillator {
+        #clock-cells = <1>;
+        clock-output-names = "ckil", "ckih";
+    };
+
+- this node defines a device with two clock outputs, the first named
+  "ckil" and the second named "ckih".  Consumer nodes always reference
+  clocks by index. The names should reflect the clock output signal
+  names for the device.
+
+==Clock consumers==
+
+Required properties:
+clocks:		List of phandle and clock specifier pairs, one pair
+		for each clock input to the device.  Note: if the
+		clock provider specifies '0' for #clock-cells, then
+		only the phandle portion of the pair will appear.
+
+Optional properties:
+clock-names:	List of clock input name strings sorted in the same
+		order as the clocks property.  Consumers drivers
+		will use clock-names to match clock input names
+		with clocks specifiers.
+clock-ranges:	Empty property indicating that child nodes can inherit named
+		clocks from this node. Useful for bus nodes to provide a
+		clock to their children.
+
+For example:
+
+    device {
+        clocks = <&osc 1>, <&ref 0>;
+        clock-names = "baud", "register";
+    };
+
+
+This represents a device with two clock inputs, named "baud" and "register".
+The baud clock is connected to output 1 of the &osc device, and the register
+clock is connected to output 0 of the &ref.
+
+==Example==
+
+    /* external oscillator */
+    osc: oscillator {
+        compatible = "fixed-clock";
+        #clock-cells = <1>;
+        clock-frequency  = <32678>;
+        clock-output-names = "osc";
+    };
+
+    /* phase-locked-loop device, generates a higher frequency clock
+     * from the external oscillator reference */
+    pll: pll@4c000 {
+        compatible = "vendor,some-pll-interface"
+        #clock-cells = <1>;
+        clocks = <&osc 0>;
+        clock-names = "ref";
+        reg = <0x4c000 0x1000>;
+        clock-output-names = "pll", "pll-switched";
+    };
+
+    /* UART, using the low frequency oscillator for the baud clock,
+     * and the high frequency switched PLL output for register
+     * clocking */
+    uart@a000 {
+        compatible = "fsl,imx-uart";
+        reg = <0xa000 0x1000>;
+        interrupts = <33>;
+        clocks = <&osc 0>, <&pll 1>;
+        clock-names = "baud", "register";
+    };
+
+This DT fragment defines three devices: an external oscillator to provide a
+low-frequency reference clock, a PLL device to generate a higher frequency
+clock signal, and a UART.
+
+* The oscillator is fixed-frequency, and provides one clock output, named "osc".
+* The PLL is both a clock provider and a clock consumer. It uses the clock
+  signal generated by the external oscillator, and provides two output signals
+  ("pll" and "pll-switched").
+* The UART has its baud clock connected the external oscillator and its
+  register clock connected to the PLL clock (the "pll-switched" signal)

Documentation/devicetree/bindings/clock/fixed-clock.txt

+Binding for simple fixed-rate clock sources.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "fixed-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- clock-frequency : frequency of clock in Hz. Should be a single cell.
+
+Optional properties:
+- gpios : From common gpio binding; gpio connection to clock enable pin.
+- clock-output-names : From common clock binding.
+
+Example:
+	clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1000000000>;
+	};

MAINTAINERS

@@ -7605,6 +7605,7 @@ W:	http://opensource.wolfsonmicro.com/content/linux-drivers-wolfson-devices
 S:	Supported
 F:	Documentation/hwmon/wm83??
 F:	arch/arm/mach-s3c64xx/mach-crag6410*
+F:	drivers/clk/clk-wm83*.c
 F:	drivers/leds/leds-wm83*.c
 F:	drivers/hwmon/wm83??-hwmon.c
 F:	drivers/input/misc/wm831x-on.c

arch/arm/Kconfig

@@ -273,8 +273,8 @@ config ARCH_INTEGRATOR
 	bool "ARM Ltd. Integrator family"
 	select ARM_AMBA
 	select ARCH_HAS_CPUFREQ
-	select CLKDEV_LOOKUP
-	select HAVE_MACH_CLKDEV
+	select COMMON_CLK
+	select CLK_VERSATILE
 	select HAVE_TCM
 	select ICST
 	select GENERIC_CLOCKEVENTS
@@ -336,6 +336,7 @@ config ARCH_VEXPRESS
 	select ICST
 	select NO_IOPORT
 	select PLAT_VERSATILE
+	select PLAT_VERSATILE_CLOCK
 	select PLAT_VERSATILE_CLCD
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	help
@@ -372,6 +373,7 @@ config ARCH_HIGHBANK
 	select ARM_TIMER_SP804
 	select CACHE_L2X0
 	select CLKDEV_LOOKUP
+	select COMMON_CLK
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU
@@ -929,7 +931,7 @@ config ARCH_U300
 	select ARM_VIC
 	select GENERIC_CLOCKEVENTS
 	select CLKDEV_LOOKUP
-	select HAVE_MACH_CLKDEV
+	select COMMON_CLK
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	help

arch/arm/boot/dts/highbank.dts

 /*
- * Copyright 2011 Calxeda, Inc.
+ * Copyright 2011-2012 Calxeda, Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -24,6 +24,7 @@
 	compatible = "calxeda,highbank";
 	#address-cells = <1>;
 	#size-cells = <1>;
+	clock-ranges;
 
 	cpus {
 		#address-cells = <1>;
@@ -33,24 +34,32 @@
 			compatible = "arm,cortex-a9";
 			reg = <0>;
 			next-level-cache = <&L2>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
 		};
 
 		cpu@1 {
 			compatible = "arm,cortex-a9";
 			reg = <1>;
 			next-level-cache = <&L2>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
 		};
 
 		cpu@2 {
 			compatible = "arm,cortex-a9";
 			reg = <2>;
 			next-level-cache = <&L2>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
 		};
 
 		cpu@3 {
 			compatible = "arm,cortex-a9";
 			reg = <3>;
 			next-level-cache = <&L2>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
 		};
 	};
 
@@ -75,12 +84,14 @@
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xfff10600 0x20>;
 			interrupts = <1 13 0xf01>;
+			clocks = <&a9periphclk>;
 		};
 
 		watchdog@fff10620 {
 			compatible = "arm,cortex-a9-twd-wdt";
 			reg = <0xfff10620 0x20>;
 			interrupts = <1 14 0xf01>;
+			clocks = <&a9periphclk>;
 		};
 
 		intc: interrupt-controller@fff11000 {
@@ -116,12 +127,15 @@
 			compatible = "calxeda,hb-sdhci";
 			reg = <0xffe0e000 0x1000>;
 			interrupts = <0 90 4>;
+			clocks = <&eclk>;
 		};
 
 		ipc@fff20000 {
 			compatible = "arm,pl320", "arm,primecell";
 			reg = <0xfff20000 0x1000>;
 			interrupts = <0 7 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		gpioe: gpio@fff30000 {
@@ -130,6 +144,8 @@
 			gpio-controller;
 			reg = <0xfff30000 0x1000>;
 			interrupts = <0 14 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		gpiof: gpio@fff31000 {
@@ -138,6 +154,8 @@
 			gpio-controller;
 			reg = <0xfff31000 0x1000>;
 			interrupts = <0 15 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		gpiog: gpio@fff32000 {
@@ -146,6 +164,8 @@
 			gpio-controller;
 			reg = <0xfff32000 0x1000>;
 			interrupts = <0 16 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		gpioh: gpio@fff33000 {
@@ -154,24 +174,32 @@
 			gpio-controller;
 			reg = <0xfff33000 0x1000>;
 			interrupts = <0 17 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		timer {
 			compatible = "arm,sp804", "arm,primecell";
 			reg = <0xfff34000 0x1000>;
 			interrupts = <0 18 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		rtc@fff35000 {
 			compatible = "arm,pl031", "arm,primecell";
 			reg = <0xfff35000 0x1000>;
 			interrupts = <0 19 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		serial@fff36000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xfff36000 0x1000>;
 			interrupts = <0 20 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		smic@fff3a000 {
@@ -186,12 +214,73 @@
 		sregs@fff3c000 {
 			compatible = "calxeda,hb-sregs";
 			reg = <0xfff3c000 0x1000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				osc: oscillator {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <33333000>;
+				};
+
+				ddrpll: ddrpll {
+					#clock-cells = <0>;
+					compatible = "calxeda,hb-pll-clock";
+					clocks = <&osc>;
+					reg = <0x108>;
+				};
+
+				a9pll: a9pll {
+					#clock-cells = <0>;
+					compatible = "calxeda,hb-pll-clock";
+					clocks = <&osc>;
+					reg = <0x100>;
+				};
+
+				a9periphclk: a9periphclk {
+					#clock-cells = <0>;
+					compatible = "calxeda,hb-a9periph-clock";
+					clocks = <&a9pll>;
+					reg = <0x104>;
+				};
+
+				a9bclk: a9bclk {
+					#clock-cells = <0>;
+					compatible = "calxeda,hb-a9bus-clock";
+					clocks = <&a9pll>;
+					reg = <0x104>;
+				};
+
+				emmcpll: emmcpll {
+					#clock-cells = <0>;
+					compatible = "calxeda,hb-pll-clock";
+					clocks = <&osc>;
+					reg = <0x10C>;
+				};
+
+				eclk: eclk {
+					#clock-cells = <0>;
+					compatible = "calxeda,hb-emmc-clock";
+					clocks = <&emmcpll>;
+					reg = <0x114>;
+				};
+
+				pclk: pclk {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <150000000>;
+				};
+			};
 		};
 
 		dma@fff3d000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0xfff3d000 0x1000>;
 			interrupts = <0 92 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		ethernet@fff50000 {

arch/arm/mach-highbank/Makefile

-obj-y					:= clock.o highbank.o system.o smc.o
+obj-y					:= highbank.o system.o smc.o
 
 plus_sec := $(call as-instr,.arch_extension sec,+sec)
 AFLAGS_smc.o				:=-Wa,-march=armv7-a$(plus_sec)

arch/arm/mach-highbank/clock.c

-/*
- * Copyright 2011 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-
-struct clk {
-	unsigned long rate;
-};
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-
-void clk_disable(struct clk *clk)
-{}
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return clk->rate;
-}
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	return clk->rate;
-}
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	return 0;
-}
-
-static struct clk eclk = { .rate = 200000000 };
-static struct clk pclk = { .rate = 150000000 };
-
-static struct clk_lookup lookups[] = {
-	{ .clk = &pclk, .con_id = "apb_pclk", },
-	{ .clk = &pclk, .dev_id = "sp804", },
-	{ .clk = &eclk, .dev_id = "ffe0e000.sdhci", },
-	{ .clk = &pclk, .dev_id = "fff36000.serial", },
-};
-
-void __init highbank_clocks_init(void)
-{
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-}

arch/arm/mach-highbank/highbank.c

@@ -105,6 +105,11 @@ static void __init highbank_init_irq(void)
 #endif
 }
 
+static struct clk_lookup lookup = {
+	.dev_id = "sp804",
+	.con_id = NULL,
+};
+
 static void __init highbank_timer_init(void)
 {
 	int irq;
@@ -122,6 +127,8 @@ static void __init highbank_timer_init(void)
 	irq = irq_of_parse_and_map(np, 0);
 
 	highbank_clocks_init();
+	lookup.clk = of_clk_get(np, 0);
+	clkdev_add(&lookup);
 
 	sp804_clocksource_and_sched_clock_init(timer_base + 0x20, "timer1");
 	sp804_clockevents_init(timer_base, irq, "timer0");

arch/arm/mach-integrator/core.c

@@ -21,7 +21,6 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
 #include <linux/io.h>
-#include <linux/clkdev.h>
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
@@ -41,17 +40,17 @@ static struct amba_pl010_data integrator_uart_data;
 #define KMI0_IRQ		{ IRQ_KMIINT0 }
 #define KMI1_IRQ		{ IRQ_KMIINT1 }
 
-static AMBA_APB_DEVICE(rtc, "mb:15", 0,
+static AMBA_APB_DEVICE(rtc, "rtc", 0,
 	INTEGRATOR_RTC_BASE, INTEGRATOR_RTC_IRQ, NULL);
 
-static AMBA_APB_DEVICE(uart0, "mb:16", 0,
+static AMBA_APB_DEVICE(uart0, "uart0", 0,
 	INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, &integrator_uart_data);
 
-static AMBA_APB_DEVICE(uart1, "mb:17", 0,
+static AMBA_APB_DEVICE(uart1, "uart1", 0,
 	INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, &integrator_uart_data);
 
-static AMBA_APB_DEVICE(kmi0, "mb:18", 0, KMI0_BASE, KMI0_IRQ, NULL);
-static AMBA_APB_DEVICE(kmi1, "mb:19", 0, KMI1_BASE, KMI1_IRQ, NULL);
+static AMBA_APB_DEVICE(kmi0, "kmi0", 0, KMI0_BASE, KMI0_IRQ, NULL);
+static AMBA_APB_DEVICE(kmi1, "kmi1", 0, KMI1_BASE, KMI1_IRQ, NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&rtc_device,
@@ -61,50 +60,6 @@ static struct amba_device *amba_devs[] __initdata = {
 	&kmi1_device,
 };
 
-/*
- * These are fixed clocks.
- */
-static struct clk clk24mhz = {
-	.rate	= 24000000,
-};
-
-static struct clk uartclk = {
-	.rate	= 14745600,
-};
-
-static struct clk dummy_apb_pclk;
-
-static struct clk_lookup lookups[] = {
-	{	/* Bus clock */
-		.con_id		= "apb_pclk",
-		.clk		= &dummy_apb_pclk,
-	}, {
-		/* Integrator/AP timer frequency */
-		.dev_id		= "ap_timer",
-		.clk		= &clk24mhz,
-	}, {	/* UART0 */
-		.dev_id		= "mb:16",
-		.clk		= &uartclk,
-	}, {	/* UART1 */
-		.dev_id		= "mb:17",
-		.clk		= &uartclk,
-	}, {	/* KMI0 */
-		.dev_id		= "mb:18",
-		.clk		= &clk24mhz,
-	}, {	/* KMI1 */
-		.dev_id		= "mb:19",
-		.clk		= &clk24mhz,
-	}, {	/* MMCI - IntegratorCP */
-		.dev_id		= "mb:1c",
-		.clk		= &uartclk,
-	}
-};
-
-void __init integrator_init_early(void)
-{
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-}
-
 static int __init integrator_init(void)
 {
 	int i;

arch/arm/mach-integrator/include/mach/clkdev.h

-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-#include <linux/module.h>
-#include <plat/clock.h>
-
-struct clk {
-	unsigned long		rate;
-	const struct clk_ops	*ops;
-	struct module		*owner;
-	const struct icst_params *params;
-	void __iomem		*vcoreg;
-	void			*data;
-};
-
-static inline int __clk_get(struct clk *clk)
-{
-	return try_module_get(clk->owner);
-}
-
-static inline void __clk_put(struct clk *clk)
-{
-	module_put(clk->owner);
-}
-
-#endif

arch/arm/mach-integrator/integrator_ap.c

@@ -33,6 +33,7 @@
 #include <linux/io.h>
 #include <linux/mtd/physmap.h>
 #include <linux/clk.h>
+#include <linux/platform_data/clk-integrator.h>
 #include <video/vga.h>
 
 #include <mach/hardware.h>
@@ -174,6 +175,7 @@ static void __init ap_init_irq(void)
 
 	fpga_irq_init(VA_IC_BASE, "SC", IRQ_PIC_START,
 		-1, INTEGRATOR_SC_VALID_INT, NULL);
+	integrator_clk_init(false);
 }
 
 #ifdef CONFIG_PM
@@ -440,6 +442,10 @@ static void integrator_clockevent_init(unsigned long inrate)
 					0xffffU);
 }
 
+void __init ap_init_early(void)
+{
+}
+
 /*
  * Set up timer(s).
  */
@@ -471,7 +477,7 @@ MACHINE_START(INTEGRATOR, "ARM-Integrator")
 	.reserve	= integrator_reserve,
 	.map_io		= ap_map_io,
 	.nr_irqs	= NR_IRQS_INTEGRATOR_AP,
-	.init_early	= integrator_init_early,
+	.init_early	= ap_init_early,
 	.init_irq	= ap_init_irq,
 	.handle_irq	= fpga_handle_irq,
 	.timer		= &ap_timer,

arch/arm/mach-integrator/integrator_cp.c

@@ -21,8 +21,8 @@
 #include <linux/amba/mmci.h>
 #include <linux/io.h>
 #include <linux/gfp.h>
-#include <linux/clkdev.h>
 #include <linux/mtd/physmap.h>
+#include <linux/platform_data/clk-integrator.h>
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
@@ -171,64 +171,9 @@ static void __init intcp_init_irq(void)
 
 	fpga_irq_init(INTCP_VA_SIC_BASE, "SIC", IRQ_SIC_START,
 		      IRQ_CP_CPPLDINT, sic_mask, NULL);
+	integrator_clk_init(true);
 }
 
-/*
- * Clock handling
- */
-#define CM_LOCK		(__io_address(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET)
-#define CM_AUXOSC	(__io_address(INTEGRATOR_HDR_BASE)+0x1c)
-
-static const struct icst_params cp_auxvco_params = {
-	.ref		= 24000000,
-	.vco_max	= ICST525_VCO_MAX_5V,
-	.vco_min	= ICST525_VCO_MIN,
-	.vd_min 	= 8,
-	.vd_max 	= 263,
-	.rd_min 	= 3,
-	.rd_max 	= 65,
-	.s2div		= icst525_s2div,
-	.idx2s		= icst525_idx2s,
-};
-
-static void cp_auxvco_set(struct clk *clk, struct icst_vco vco)
-{
-	u32 val;
-
-	val = readl(clk->vcoreg) & ~0x7ffff;
-	val |= vco.v | (vco.r << 9) | (vco.s << 16);
-
-	writel(0xa05f, CM_LOCK);
-	writel(val, clk->vcoreg);
-	writel(0, CM_LOCK);
-}
-
-static const struct clk_ops cp_auxclk_ops = {
-	.round	= icst_clk_round,
-	.set	= icst_clk_set,
-	.setvco	= cp_auxvco_set,
-};
-
-static struct clk cp_auxclk = {
-	.ops	= &cp_auxclk_ops,
-	.params	= &cp_auxvco_params,
-	.vcoreg	= CM_AUXOSC,
-};
-
-static struct clk sp804_clk = {
-	.rate	= 1000000,
-};
-
-static struct clk_lookup cp_lookups[] = {
-	{	/* CLCD */
-		.dev_id		= "mb:c0",
-		.clk		= &cp_auxclk,
-	}, {	/* SP804 timers */
-		.dev_id		= "sp804",
-		.clk		= &sp804_clk,
-	},
-};
-
 /*
  * Flash handling.
  */
@@ -336,10 +281,10 @@ static struct mmci_platform_data mmc_data = {
 #define INTEGRATOR_CP_MMC_IRQS	{ IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }
 #define INTEGRATOR_CP_AACI_IRQS	{ IRQ_CP_AACIINT }
 
-static AMBA_APB_DEVICE(mmc, "mb:1c", 0, INTEGRATOR_CP_MMC_BASE,
+static AMBA_APB_DEVICE(mmc, "mmci", 0, INTEGRATOR_CP_MMC_BASE,
 	INTEGRATOR_CP_MMC_IRQS, &mmc_data);
 
-static AMBA_APB_DEVICE(aaci, "mb:1d", 0, INTEGRATOR_CP_AACI_BASE,
+static AMBA_APB_DEVICE(aaci, "aaci", 0, INTEGRATOR_CP_AACI_BASE,
 	INTEGRATOR_CP_AACI_IRQS, NULL);
 
 
@@ -393,7 +338,7 @@ static struct clcd_board clcd_data = {
 	.remove		= versatile_clcd_remove_dma,
 };
 
-static AMBA_AHB_DEVICE(clcd, "mb:c0", 0, INTCP_PA_CLCD_BASE,
+static AMBA_AHB_DEVICE(clcd, "clcd", 0, INTCP_PA_CLCD_BASE,
 	{ IRQ_CP_CLCDCINT }, &clcd_data);
 
 static struct amba_device *amba_devs[] __initdata = {
@@ -406,10 +351,6 @@ static struct amba_device *amba_devs[] __initdata = {
 
 static void __init intcp_init_early(void)
 {
-	clkdev_add_table(cp_lookups, ARRAY_SIZE(cp_lookups));
-
-	integrator_init_early();
-
 #ifdef CONFIG_PLAT_VERSATILE_SCHED_CLOCK
 	versatile_sched_clock_init(REFCOUNTER, 24000000);
 #endif

arch/arm/mach-u300/Makefile

@@ -2,7 +2,7 @@
 # Makefile for the linux kernel, U300 machine.
 #
 
-obj-y		:= core.o clock.o timer.o
+obj-y		:= core.o timer.o
 obj-m		:=
 obj-n		:=
 obj-		:=

arch/arm/mach-u300/clock.h

-/*
- * arch/arm/mach-u300/include/mach/clock.h
- *
- * Copyright (C) 2004 - 2005 Nokia corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * Adopted to ST-Ericsson U300 platforms by
- * Jonas Aaberg <jonas.aberg@stericsson.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __MACH_CLOCK_H
-#define __MACH_CLOCK_H
-
-#include <linux/clk.h>
-
-struct clk {
-	struct list_head node;
-	struct module *owner;
-	struct device *dev;
-	const char *name;
-	struct clk *parent;
-
-	spinlock_t lock;
-	unsigned long rate;
-	bool reset;
-	__u16 clk_val;
-	__s8 usecount;
-	void __iomem * res_reg;
-	__u16 res_mask;
-
-	bool hw_ctrld;
-
-	void (*recalc) (struct clk *);
-	int (*set_rate) (struct clk *, unsigned long);
-	unsigned long (*get_rate) (struct clk *);
-	unsigned long (*round_rate) (struct clk *, unsigned long);
-	void (*init) (struct clk *);
-	void (*enable) (struct clk *);
-	void (*disable) (struct clk *);
-};
-
-int u300_clock_init(void);
-
-#endif

arch/arm/mach-u300/core.c

@@ -30,6 +30,7 @@
 #include <linux/pinctrl/consumer.h>
 #include <linux/pinctrl/pinconf-generic.h>
 #include <linux/dma-mapping.h>
+#include <linux/platform_data/clk-u300.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -44,7 +45,6 @@
 #include <mach/dma_channels.h>
 #include <mach/gpio-u300.h>
 
-#include "clock.h"
 #include "spi.h"
 #include "i2c.h"
 #include "u300-gpio.h"
@@ -1658,12 +1658,20 @@ void __init u300_init_irq(void)
 	int i;
 
 	/* initialize clocking early, we want to clock the INTCON */
-	u300_clock_init();
+	u300_clk_init(U300_SYSCON_VBASE);
+
+	/* Bootstrap EMIF and SEMI clocks */
+	clk = clk_get_sys("pl172", NULL);
+	BUG_ON(IS_ERR(clk));
+	clk_prepare_enable(clk);
+	clk = clk_get_sys("semi", NULL);
+	BUG_ON(IS_ERR(clk));
+	clk_prepare_enable(clk);
 
 	/* Clock the interrupt controller */
 	clk = clk_get_sys("intcon", NULL);
 	BUG_ON(IS_ERR(clk));
-	clk_enable(clk);
+	clk_prepare_enable(clk);
 
 	for (i = 0; i < U300_VIC_IRQS_END; i++)
 		set_bit(i, (unsigned long *) &mask[0]);
@@ -1811,13 +1819,6 @@ void __init u300_init_devices(void)
 	/* Check what platform we run and print some status information */
 	u300_init_check_chip();
 
-	/* Set system to run at PLL208, max performance, a known state. */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	/* Wait for the PLL208 to lock if not locked in yet */
-	while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) &
-		 U300_SYSCON_CSR_PLL208_LOCK_IND));
 	/* Initialize SPI device with some board specifics */
 	u300_spi_init(&pl022_device);
 

arch/arm/mach-u300/timer.c

@@ -354,7 +354,7 @@ static void __init u300_timer_init(void)
 	/* Clock the interrupt controller */
 	clk = clk_get_sys("apptimer", NULL);
 	BUG_ON(IS_ERR(clk));
-	clk_enable(clk);
+	clk_prepare_enable(clk);
 	rate = clk_get_rate(clk);
 
 	setup_sched_clock(u300_read_sched_clock, 32, rate);

drivers/clk/Kconfig

@@ -34,4 +34,11 @@ config COMMON_CLK_DEBUG
 	  clk_flags, clk_prepare_count, clk_enable_count &
 	  clk_notifier_count.
 
+config COMMON_CLK_WM831X
+	tristate "Clock driver for WM831x/2x PMICs"
+	depends on MFD_WM831X
+	---help---
+          Supports the clocking subsystem of the WM831x/2x series of
+	  PMICs from Wolfson Microlectronics.
+
 endmenu

drivers/clk/Makefile

-
+# common clock types
 obj-$(CONFIG_CLKDEV_LOOKUP)	+= clkdev.o
 obj-$(CONFIG_COMMON_CLK)	+= clk.o clk-fixed-rate.o clk-gate.o \
 				   clk-mux.o clk-divider.o clk-fixed-factor.o
 # SoCs specific
 obj-$(CONFIG_ARCH_NOMADIK)	+= clk-nomadik.o
+obj-$(CONFIG_ARCH_HIGHBANK)	+= clk-highbank.o
 obj-$(CONFIG_ARCH_MXS)		+= mxs/
 obj-$(CONFIG_ARCH_SOCFPGA)	+= socfpga/
 obj-$(CONFIG_PLAT_SPEAR)	+= spear/
+obj-$(CONFIG_ARCH_U300)		+= clk-u300.o
+obj-$(CONFIG_ARCH_INTEGRATOR)	+= versatile/
+
+# Chip specific
+obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o

drivers/clk/clk-divider.c

@@ -30,18 +30,89 @@
 #define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw)
 
 #define div_mask(d)	((1 << (d->width)) - 1)
+#define is_power_of_two(i)	!(i & ~i)
+
+static unsigned int _get_table_maxdiv(const struct clk_div_table *table)
+{
+	unsigned int maxdiv = 0;
+	const struct clk_div_table *clkt;
+
+	for (clkt = table; clkt->div; clkt++)
+		if (clkt->div > maxdiv)
+			maxdiv = clkt->div;
+	return maxdiv;
+}
+
+static unsigned int _get_maxdiv(struct clk_divider *divider)
+{
+	if (divider->flags & CLK_DIVIDER_ONE_BASED)
+		return div_mask(divider);
+	if (divider->flags & CLK_DIVIDER_POWER_OF_TWO)
+		return 1 << div_mask(divider);
+	if (divider->table)
+		return _get_table_maxdiv(divider->table);
+	return div_mask(divider) + 1;
+}
+
+static unsigned int _get_table_div(const struct clk_div_table *table,
+							unsigned int val)
+{
+	const struct clk_div_table *clkt;
+
+	for (clkt = table; clkt->div; clkt++)
+		if (clkt->val == val)
+			return clkt->div;
+	return 0;
+}
+
+static unsigned int _get_div(struct clk_divider *divider, unsigned int val)
+{
+	if (divider->flags & CLK_DIVIDER_ONE_BASED)
+		return val;
+	if (divider->flags & CLK_DIVIDER_POWER_OF_TWO)
+		return 1 << val;
+	if (divider->table)
+		return _get_table_div(divider->table, val);
+	return val + 1;
+}
+
+static unsigned int _get_table_val(const struct clk_div_table *table,
+							unsigned int div)
+{
+	const struct clk_div_table *clkt;
+
+	for (clkt = table; clkt->div; clkt++)
+		if (clkt->div == div)
+			return clkt->val;
+	return 0;
+}
+
+static unsigned int _get_val(struct clk_divider *divider, u8 div)
+{
+	if (divider->flags & CLK_DIVIDER_ONE_BASED)
+		return div;
+	if (divider->flags & CLK_DIVIDER_POWER_OF_TWO)
+		return __ffs(div);
+	if (divider->table)
+		return  _get_table_val(divider->table, div);
+	return div - 1;
+}
 
 static unsigned long clk_divider_recalc_rate(struct clk_hw *hw,
 		unsigned long parent_rate)
 {
 	struct clk_divider *divider = to_clk_divider(hw);
-	unsigned int div;
+	unsigned int div, val;
 
-	div = readl(divider->reg) >> divider->shift;
-	div &= div_mask(divider);
+	val = readl(divider->reg) >> divider->shift;
+	val &= div_mask(divider);
 
-	if (!(divider->flags & CLK_DIVIDER_ONE_BASED))
-		div++;
+	div = _get_div(divider, val);
+	if (!div) {
+		WARN(1, "%s: Invalid divisor for clock %s\n", __func__,
+						__clk_get_name(hw->clk));
+		return parent_rate;
+	}
 
 	return parent_rate / div;
 }
@@ -52,6 +123,26 @@ static unsigned long clk_divider_recalc_rate(struct clk_hw *hw,
  */
 #define MULT_ROUND_UP(r, m) ((r) * (m) + (m) - 1)
 
+static bool _is_valid_table_div(const struct clk_div_table *table,
+							 unsigned int div)
+{
+	const struct clk_div_table *clkt;
+
+	for (clkt = table; clkt->div; clkt++)
+		if (clkt->div == div)
+			return true;
+	return false;
+}
+
+static bool _is_valid_div(struct clk_divider *divider, unsigned int div)
+{
+	if (divider->flags & CLK_DIVIDER_POWER_OF_TWO)
+		return is_power_of_two(div);
+	if (divider->table)
+		return _is_valid_table_div(divider->table, div);
+	return true;
+}
+
 static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
 		unsigned long *best_parent_rate)
 {
@@ -62,10 +153,7 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
 	if (!rate)
 		rate = 1;
 
-	maxdiv = (1 << divider->width);
-
-	if (divider->flags & CLK_DIVIDER_ONE_BASED)
-		maxdiv--;
+	maxdiv = _get_maxdiv(divider);
 
 	if (!(__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT)) {
 		parent_rate = *best_parent_rate;
@@ -82,6 +170,8 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
 	maxdiv = min(ULONG_MAX / rate, maxdiv);
 
 	for (i = 1; i <= maxdiv; i++) {
+		if (!_is_valid_div(divider, i))
+			continue;
 		parent_rate = __clk_round_rate(__clk_get_parent(hw->clk),
 				MULT_ROUND_UP(rate, i));
 		now = parent_rate / i;
@@ -93,9 +183,7 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
 	}
 
 	if (!bestdiv) {
-		bestdiv = (1 << divider->width);
-		if (divider->flags & CLK_DIVIDER_ONE_BASED)
-			bestdiv--;
+		bestdiv = _get_maxdiv(divider);
 		*best_parent_rate = __clk_round_rate(__clk_get_parent(hw->clk), 1);
 	}
 
@@ -115,24 +203,22 @@ static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
 				unsigned long parent_rate)
 {
 	struct clk_divider *divider = to_clk_divider(hw);
-	unsigned int div;
+	unsigned int div, value;
 	unsigned long flags = 0;
 	u32 val;
 
 	div = parent_rate / rate;
+	value = _get_val(divider, div);
 
-	if (!(divider->flags & CLK_DIVIDER_ONE_BASED))
-		div--;
-
-	if (div > div_mask(divider))
-		div = div_mask(divider);
+	if (value > div_mask(divider))
+		value = div_mask(divider);
 
 	if (divider->lock)
 		spin_lock_irqsave(divider->lock, flags);
 
 	val = readl(divider->reg);
 	val &= ~(div_mask(divider) << divider->shift);
-	val |= div << divider->shift;
+	val |= value << divider->shift;
 	writel(val, divider->reg);
 
 	if (divider->lock)
@@ -148,22 +234,11 @@ const struct clk_ops clk_divider_ops = {
 };
 EXPORT_SYMBOL_GPL(clk_divider_ops);
 
-/**
- * clk_register_divider - register a divider clock with the clock framework
- * @dev: device registering this clock
- * @name: name of this clock
- * @parent_name: name of clock's parent
- * @flags: framework-specific flags
- * @reg: register address to adjust divider
- * @shift: number of bits to shift the bitfield
- * @width: width of the bitfield
- * @clk_divider_flags: divider-specific flags for this clock
- * @lock: shared register lock for this clock
- */
-struct clk *clk_register_divider(struct device *dev, const char *name,
+static struct clk *_register_divider(struct device *dev, const char *name,
 		const char *parent_name, unsigned long flags,
 		void __iomem *reg, u8 shift, u8 width,
-		u8 clk_divider_flags, spinlock_t *lock)
+		u8 clk_divider_flags, const struct clk_div_table *table,
+		spinlock_t *lock)
 {
 	struct clk_divider *div;
 	struct clk *clk;
@@ -178,7 +253,7 @@ struct clk *clk_register_divider(struct device *dev, const char *name,
 
 	init.name = name;
 	init.ops = &clk_divider_ops;
-	init.flags = flags;
+	init.flags = flags | CLK_IS_BASIC;
 	init.parent_names = (parent_name ? &parent_name: NULL);
 	init.num_parents = (parent_name ? 1 : 0);
 
@@ -189,6 +264,7 @@ struct clk *clk_register_divider(struct device *dev, const char *name,
 	div->flags = clk_divider_flags;
 	div->lock = lock;
 	div->hw.init = &init;
+	div->table = table;
 
 	/* register the clock */
 	clk = clk_register(dev, &div->hw);
@@ -198,3 +274,48 @@ struct clk *clk_register_divider(struct device *dev, const char *name,
 
 	return clk;
 }
+
+/**
+ * clk_register_divider - register a divider clock with the clock framework
+ * @dev: device registering this clock
+ * @name: name of this clock
+ * @parent_name: name of clock's parent
+ * @flags: framework-specific flags
+ * @reg: register address to adjust divider
+ * @shift: number of bits to shift the bitfield
+ * @width: width of the bitfield
+ * @clk_divider_flags: divider-specific flags for this clock
+ * @lock: shared register lock for this clock
+ */
+struct clk *clk_register_divider(struct device *dev, const char *name,
+		const char *parent_name, unsigned long flags,
+		void __iomem *reg, u8 shift, u8 width,
+		u8 clk_divider_flags, spinlock_t *lock)
+{
+	return _register_divider(dev, name, parent_name, flags, reg, shift,
+			width, clk_divider_flags, NULL, lock);
+}
+
+/**
+ * clk_register_divider_table - register a table based divider clock with
+ * the clock framework
+ * @dev: device registering this clock
+ * @name: name of this clock
+ * @parent_name: name of clock's parent
+ * @flags: framework-specific flags
+ * @reg: register address to adjust divider
+ * @shift: number of bits to shift the bitfield
+ * @width: width of the bitfield
+ * @clk_divider_flags: divider-specific flags for this clock
+ * @table: array of divider/value pairs ending with a div set to 0
+ * @lock: shared register lock for this clock
+ */
+struct clk *clk_register_divider_table(struct device *dev, const char *name,
+		const char *parent_name, unsigned long flags,
+		void __iomem *reg, u8 shift, u8 width,
+		u8 clk_divider_flags, const struct clk_div_table *table,
+		spinlock_t *lock)
+{
+	return _register_divider(dev, name, parent_name, flags, reg, shift,
+			width, clk_divider_flags, table, lock);
+}

drivers/clk/clk-fixed-factor.c

@@ -82,7 +82,7 @@ struct clk *clk_register_fixed_factor(struct device *dev, const char *name,
 
 	init.name = name;
 	init.ops = &clk_fixed_factor_ops;
-	init.flags = flags;
+	init.flags = flags | CLK_IS_BASIC;
 	init.parent_names = &parent_name;
 	init.num_parents = 1;
 

drivers/clk/clk-fixed-rate.c

@@ -14,6 +14,7 @@
 #include <linux/slab.h>
 #include <linux/io.h>
 #include <linux/err.h>
+#include <linux/of.h>
 
 /*
  * DOC: basic fixed-rate clock that cannot gate
@@ -63,7 +64,7 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
 
 	init.name = name;
 	init.ops = &clk_fixed_rate_ops;
-	init.flags = flags;
+	init.flags = flags | CLK_IS_BASIC;
 	init.parent_names = (parent_name ? &parent_name: NULL);
 	init.num_parents = (parent_name ? 1 : 0);
 
@@ -79,3 +80,25 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
 
 	return clk;
 }
+
+#ifdef CONFIG_OF
+/**
+ * of_fixed_clk_setup() - Setup function for simple fixed rate clock
+ */
+void __init of_fixed_clk_setup(struct device_node *node)
+{
+	struct clk *clk;
+	const char *clk_name = node->name;
+	u32 rate;
+
+	if (of_property_read_u32(node, "clock-frequency", &rate))
+		return;
+
+	of_property_read_string(node, "clock-output-names", &clk_name);
+
+	clk = clk_register_fixed_rate(NULL, clk_name, NULL, CLK_IS_ROOT, rate);
+	if (clk)
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+}
+EXPORT_SYMBOL_GPL(of_fixed_clk_setup);
+#endif

drivers/clk/clk-gate.c

@@ -130,7 +130,7 @@ struct clk *clk_register_gate(struct device *dev, const char *name,
 
 	init.name = name;
 	init.ops = &clk_gate_ops;
-	init.flags = flags;
+	init.flags = flags | CLK_IS_BASIC;
 	init.parent_names = (parent_name ? &parent_name: NULL);
 	init.num_parents = (parent_name ? 1 : 0);
 

drivers/clk/clk-highbank.c

+/*
+ * Copyright 2011-2012 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+
+extern void __iomem *sregs_base;
+
+#define HB_PLL_LOCK_500		0x20000000
+#define HB_PLL_LOCK		0x10000000
+#define HB_PLL_DIVF_SHIFT	20
+#define HB_PLL_DIVF_MASK	0x0ff00000
+#define HB_PLL_DIVQ_SHIFT	16
+#define HB_PLL_DIVQ_MASK	0x00070000
+#define HB_PLL_DIVR_SHIFT	8
+#define HB_PLL_DIVR_MASK	0x00001f00
+#define HB_PLL_RANGE_SHIFT	4
+#define HB_PLL_RANGE_MASK	0x00000070
+#define HB_PLL_BYPASS		0x00000008
+#define HB_PLL_RESET		0x00000004
+#define HB_PLL_EXT_BYPASS	0x00000002
+#define HB_PLL_EXT_ENA		0x00000001
+
+#define HB_PLL_VCO_MIN_FREQ	2133000000
+#define HB_PLL_MAX_FREQ		HB_PLL_VCO_MIN_FREQ
+#define HB_PLL_MIN_FREQ		(HB_PLL_VCO_MIN_FREQ / 64)
+
+#define HB_A9_BCLK_DIV_MASK	0x00000006
+#define HB_A9_BCLK_DIV_SHIFT	1
+#define HB_A9_PCLK_DIV		0x00000001
+
+struct hb_clk {
+        struct clk_hw	hw;
+	void __iomem	*reg;
+	char *parent_name;
+};
+#define to_hb_clk(p) container_of(p, struct hb_clk, hw)
+
+static int clk_pll_prepare(struct clk_hw *hwclk)
+	{
+	struct hb_clk *hbclk = to_hb_clk(hwclk);
+	u32 reg;
+
+	reg = readl(hbclk->reg);
+	reg &= ~HB_PLL_RESET;
+	writel(reg, hbclk->reg);
+
+	while ((readl(hbclk->reg) & HB_PLL_LOCK) == 0)
+		;
+	while ((readl(hbclk->reg) & HB_PLL_LOCK_500) == 0)
+		;
+
+	return 0;
+}
+
+static void clk_pll_unprepare(struct clk_hw *hwclk)
+{
+	struct hb_clk *hbclk = to_hb_clk(hwclk);
+	u32 reg;
+
+	reg = readl(hbclk->reg);
+	reg |= HB_PLL_RESET;
+	writel(reg, hbclk->reg);
+}
+
+static int clk_pll_enable(struct clk_hw *hwclk)
+{
+	struct hb_clk *hbclk = to_hb_clk(hwclk);
+	u32 reg;
+
+	reg = readl(hbclk->reg);
+	reg |= HB_PLL_EXT_ENA;
+	writel(reg, hbclk->reg);
+
+	return 0;
+}
+
+static void clk_pll_disable(struct clk_hw *hwclk)
+{
+	struct hb_clk *hbclk = to_hb_clk(hwclk);
+	u32 reg;
+
+	reg = readl(hbclk->reg);
+	reg &= ~HB_PLL_EXT_ENA;
+	writel(reg, hbclk->reg);
+}
+
+static unsigned long clk_pll_recalc_rate(struct clk_hw *hwclk,
+					 unsigned long parent_rate)
+{
+	struct hb_clk *hbclk = to_hb_clk(hwclk);
+	unsigned long divf, divq, vco_freq, reg;
+
+	reg = readl(hbclk->reg);
+	if (reg & HB_PLL_EXT_BYPASS)
+		return parent_rate;
+
+	divf = (reg & HB_PLL_DIVF_MASK) >> HB_PLL_DIVF_SHIFT;
+	divq = (reg & HB_PLL_DIVQ_MASK) >> HB_PLL_DIVQ_SHIFT;
+	vco_freq = parent_rate * (divf + 1);
+
+	return vco_freq / (1 << divq);
+}
+
+static void clk_pll_calc(unsigned long rate, unsigned long ref_freq,
+			u32 *pdivq, u32 *pdivf)
+{
+	u32 divq, divf;
+	unsigned long vco_freq;
+
+	if (rate < HB_PLL_MIN_FREQ)
+		rate = HB_PLL_MIN_FREQ;
+	if (rate > HB_PLL_MAX_FREQ)
+		rate = HB_PLL_MAX_FREQ;
+
+	for (divq = 1; divq <= 6; divq++) {
+		if ((rate * (1 << divq)) >= HB_PLL_VCO_MIN_FREQ)
+			break;
+	}
+
+	vco_freq = rate * (1 << divq);
+	divf = (vco_freq + (ref_freq / 2)) / ref_freq;
+	divf--;
+
+	*pdivq = divq;
+	*pdivf = divf;
+}
+
+static long clk_pll_round_rate(struct clk_hw *hwclk, unsigned long rate,
+			       unsigned long *parent_rate)
+{
+	u32 divq, divf;
+	unsigned long ref_freq = *parent_rate;
+
+	clk_pll_calc(rate, ref_freq, &divq, &divf);
+
+	return (ref_freq * (divf + 1)) / (1 << divq);
+}
+
+static int clk_pll_set_rate(struct clk_hw *hwclk, unsigned long rate,
+			    unsigned long parent_rate)
+{
+	struct hb_clk *hbclk = to_hb_clk(hwclk);
+	u32 divq, divf;
+	u32 reg;
+
+	clk_pll_calc(rate, parent_rate, &divq, &divf);
+
+	reg = readl(hbclk->reg);
+	if (divf != ((reg & HB_PLL_DIVF_MASK) >> HB_PLL_DIVF_SHIFT)) {
+		/* Need to re-lock PLL, so put it into bypass mode */
+		reg |= HB_PLL_EXT_BYPASS;
+		writel(reg | HB_PLL_EXT_BYPASS, hbclk->reg);
+
+		writel(reg | HB_PLL_RESET, hbclk->reg);
+		reg &= ~(HB_PLL_DIVF_MASK | HB_PLL_DIVQ_MASK);
+		reg |= (divf << HB_PLL_DIVF_SHIFT) | (divq << HB_PLL_DIVQ_SHIFT);
+		writel(reg | HB_PLL_RESET, hbclk->reg);
+		writel(reg, hbclk->reg);
+
+		while ((readl(hbclk->reg) & HB_PLL_LOCK) == 0)
+			;
+		while ((readl(hbclk->reg) & HB_PLL_LOCK_500) == 0)
+			;
+		reg |= HB_PLL_EXT_ENA;
+		reg &= ~HB_PLL_EXT_BYPASS;
+	} else {
+		reg &= ~HB_PLL_DIVQ_MASK;
+		reg |= divq << HB_PLL_DIVQ_SHIFT;
+	}
+	writel(reg, hbclk->reg);
+
+	return 0;
+}
+
+static const struct clk_ops clk_pll_ops = {
+	.prepare = clk_pll_prepare,
+	.unprepare = clk_pll_unprepare,
+	.enable = clk_pll_enable,
+	.disable = clk_pll_disable,
+	.recalc_rate = clk_pll_recalc_rate,
+	.round_rate = clk_pll_round_rate,
+	.set_rate = clk_pll_set_rate,
+};
+
+static unsigned long clk_cpu_periphclk_recalc_rate(struct clk_hw *hwclk,
+						   unsigned long parent_rate)
+{
+	struct hb_clk *hbclk = to_hb_clk(hwclk);
+	u32 div = (readl(hbclk->reg) & HB_A9_PCLK_DIV) ? 8 : 4;
+	return parent_rate / div;
+}
+
+static const struct clk_ops a9periphclk_ops = {
+	.recalc_rate = clk_cpu_periphclk_recalc_rate,
+};
+
+static unsigned long clk_cpu_a9bclk_recalc_rate(struct clk_hw *hwclk,
+						unsigned long parent_rate)
+{
+	struct hb_clk *hbclk = to_hb_clk(hwclk);
+	u32 div = (readl(hbclk->reg) & HB_A9_BCLK_DIV_MASK) >> HB_A9_BCLK_DIV_SHIFT;
+
+	return parent_rate / (div + 2);
+}
+
+static const struct clk_ops a9bclk_ops = {
+	.recalc_rate = clk_cpu_a9bclk_recalc_rate,
+};
+
+static unsigned long clk_periclk_recalc_rate(struct clk_hw *hwclk,
+					     unsigned long parent_rate)
+{
+	struct hb_clk *hbclk = to_hb_clk(hwclk);
+	u32 div;
+
+	div = readl(hbclk->reg) & 0x1f;
+	div++;
+	div *= 2;
+
+	return parent_rate / div;
+}
+
+static long clk_periclk_round_rate(struct clk_hw *hwclk, unsigned long rate,
+				   unsigned long *parent_rate)
+{
+	u32 div;
+
+	div = *parent_rate / rate;
+	div++;
+	div &= ~0x1;
+
+	return *parent_rate / div;
+}
+
+static int clk_periclk_set_rate(struct clk_hw *hwclk, unsigned long rate,
+				unsigned long parent_rate)
+{
+	struct hb_clk *hbclk = to_hb_clk(hwclk);
+	u32 div;
+
+	div = parent_rate / rate;
+	if (div & 0x1)
+		return -EINVAL;
+
+	writel(div >> 1, hbclk->reg);
+	return 0;
+}
+
+static const struct clk_ops periclk_ops = {
+	.recalc_rate = clk_periclk_recalc_rate,
+	.round_rate = clk_periclk_round_rate,
+	.set_rate = clk_periclk_set_rate,
+};
+
+static __init struct clk *hb_clk_init(struct device_node *node, const struct clk_ops *ops)
+{
+	u32 reg;
+	struct clk *clk;
+	struct hb_clk *hb_clk;
+	const char *clk_name = node->name;
+	const char *parent_name;
+	struct clk_init_data init;
+	int rc;
+
+	rc = of_property_read_u32(node, "reg", &reg);
+	if (WARN_ON(rc))
+		return NULL;
+
+	hb_clk = kzalloc(sizeof(*hb_clk), GFP_KERNEL);
+	if (WARN_ON(!hb_clk))
+		return NULL;
+
+	hb_clk->reg = sregs_base + reg;
+
+	of_property_read_string(node, "clock-output-names", &clk_name);
+
+	init.name = clk_name;
+	init.ops = ops;
+	init.flags = 0;
+	parent_name = of_clk_get_parent_name(node, 0);
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	hb_clk->hw.init = &init;
+
+	clk = clk_register(NULL, &hb_clk->hw);
+	if (WARN_ON(IS_ERR(clk))) {
+		kfree(hb_clk);
+		return NULL;
+	}
+	rc = of_clk_add_provider(node, of_clk_src_simple_get, clk);
+	return clk;
+}
+
+static void __init hb_pll_init(struct device_node *node)
+{
+	hb_clk_init(node, &clk_pll_ops);
+}
+
+static void __init hb_a9periph_init(struct device_node *node)
+{
+	hb_clk_init(node, &a9periphclk_ops);
+}
+
+static void __init hb_a9bus_init(struct device_node *node)
+{
+	struct clk *clk = hb_clk_init(node, &a9bclk_ops);
+	clk_prepare_enable(clk);
+}
+
+static void __init hb_emmc_init(struct device_node *node)
+{
+	hb_clk_init(node, &periclk_ops);
+}
+
+static const __initconst struct of_device_id clk_match[] = {
+	{ .compatible = "fixed-clock", .data = of_fixed_clk_setup, },
+	{ .compatible = "calxeda,hb-pll-clock", .data = hb_pll_init, },
+	{ .compatible = "calxeda,hb-a9periph-clock", .data = hb_a9periph_init, },
+	{ .compatible = "calxeda,hb-a9bus-clock", .data = hb_a9bus_init, },
+	{ .compatible = "calxeda,hb-emmc-clock", .data = hb_emmc_init, },
+	{}
+};
+
+void __init highbank_clocks_init(void)
+{
+	of_clk_init(clk_match);
+}

drivers/clk/clk-mux.c

@@ -106,7 +106,7 @@ struct clk *clk_register_mux(struct device *dev, const char *name,
 
 	init.name = name;
 	init.ops = &clk_mux_ops;
-	init.flags = flags;
+	init.flags = flags | CLK_IS_BASIC;
 	init.parent_names = parent_names;
 	init.num_parents = num_parents;
 

drivers/clk/clk-wm831x.c

+/*
+ * WM831x clock control
+ *
+ * Copyright 2011-2 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/wm831x/core.h>
+
+struct wm831x_clk {
+	struct wm831x *wm831x;
+	struct clk_hw xtal_hw;
+	struct clk_hw fll_hw;
+	struct clk_hw clkout_hw;
+	struct clk *xtal;
+	struct clk *fll;
+	struct clk *clkout;
+	bool xtal_ena;
+};
+
+static int wm831x_xtal_is_enabled(struct clk_hw *hw)
+{
+	struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+						  xtal_hw);
+
+	return clkdata->xtal_ena;
+}
+
+static unsigned long wm831x_xtal_recalc_rate(struct clk_hw *hw,
+					     unsigned long parent_rate)
+{
+	struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+						  xtal_hw);
+
+	if (clkdata->xtal_ena)
+		return 32768;
+	else
+		return 0;
+}
+
+static const struct clk_ops wm831x_xtal_ops = {
+	.is_enabled = wm831x_xtal_is_enabled,
+	.recalc_rate = wm831x_xtal_recalc_rate,
+};
+
+static struct clk_init_data wm831x_xtal_init = {
+	.name = "xtal",
+	.ops = &wm831x_xtal_ops,
+	.flags = CLK_IS_ROOT,
+};
+
+static const unsigned long wm831x_fll_auto_rates[] = {
+	 2048000,
+	11289600,
+	12000000,
+	12288000,
+	19200000,
+	22579600,
+	24000000,
+	24576000,
+};
+
+static int wm831x_fll_is_enabled(struct clk_hw *hw)
+{
+	struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+						  fll_hw);
+	struct wm831x *wm831x = clkdata->wm831x;
+	int ret;
+
+	ret = wm831x_reg_read(wm831x, WM831X_FLL_CONTROL_1);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Unable to read FLL_CONTROL_1: %d\n",
+			ret);
+		return true;
+	}
+
+	return (ret & WM831X_FLL_ENA) != 0;
+}
+
+static int wm831x_fll_prepare(struct clk_hw *hw)
+{
+	struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+						  fll_hw);
+	struct wm831x *wm831x = clkdata->wm831x;
+	int ret;
+
+	ret = wm831x_set_bits(wm831x, WM831X_FLL_CONTROL_2,
+			      WM831X_FLL_ENA, WM831X_FLL_ENA);
+	if (ret != 0)
+		dev_crit(wm831x->dev, "Failed to enable FLL: %d\n", ret);
+
+	usleep_range(2000, 2000);
+
+	return ret;
+}
+
+static void wm831x_fll_unprepare(struct clk_hw *hw)
+{
+	struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+						  fll_hw);
+	struct wm831x *wm831x = clkdata->wm831x;
+	int ret;
+
+	ret = wm831x_set_bits(wm831x, WM831X_FLL_CONTROL_2, WM831X_FLL_ENA, 0);
+	if (ret != 0)
+		dev_crit(wm831x->dev, "Failed to disaable FLL: %d\n", ret);
+}
+
+static unsigned long wm831x_fll_recalc_rate(struct clk_hw *hw,
+					    unsigned long parent_rate)
+{
+	struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+						  fll_hw);
+	struct wm831x *wm831x = clkdata->wm831x;
+	int ret;
+
+	ret = wm831x_reg_read(wm831x, WM831X_CLOCK_CONTROL_2);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Unable to read CLOCK_CONTROL_2: %d\n",
+			ret);
+		return 0;
+	}
+
+	if (ret & WM831X_FLL_AUTO)
+		return wm831x_fll_auto_rates[ret & WM831X_FLL_AUTO_FREQ_MASK];
+
+	dev_err(wm831x->dev, "FLL only supported in AUTO mode\n");
+
+	return 0;
+}
+
+static long wm831x_fll_round_rate(struct clk_hw *hw, unsigned long rate,
+				  unsigned long *unused)
+{
+	int best = 0;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(wm831x_fll_auto_rates); i++)
+		if (abs(wm831x_fll_auto_rates[i] - rate) <
+		    abs(wm831x_fll_auto_rates[best] - rate))
+			best = i;
+
+	return wm831x_fll_auto_rates[best];
+}
+
+static int wm831x_fll_set_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long parent_rate)
+{
+	struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+						  fll_hw);
+	struct wm831x *wm831x = clkdata->wm831x;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(wm831x_fll_auto_rates); i++)
+		if (wm831x_fll_auto_rates[i] == rate)
+			break;
+	if (i == ARRAY_SIZE(wm831x_fll_auto_rates))
+		return -EINVAL;
+
+	if (wm831x_fll_is_enabled(hw))
+		return -EPERM;
+
+	return wm831x_set_bits(wm831x, WM831X_CLOCK_CONTROL_2,
+			       WM831X_FLL_AUTO_FREQ_MASK, i);
+}
+
+static const char *wm831x_fll_parents[] = {
+	"xtal",
+	"clkin",
+};
+
+static u8 wm831x_fll_get_parent(struct clk_hw *hw)
+{
+	struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+						  fll_hw);
+	struct wm831x *wm831x = clkdata->wm831x;
+	int ret;
+
+	/* AUTO mode is always clocked from the crystal */
+	ret = wm831x_reg_read(wm831x, WM831X_CLOCK_CONTROL_2);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Unable to read CLOCK_CONTROL_2: %d\n",
+			ret);
+		return 0;
+	}
+
+	if (ret & WM831X_FLL_AUTO)
+		return 0;
+
+	ret = wm831x_reg_read(wm831x, WM831X_FLL_CONTROL_5);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Unable to read FLL_CONTROL_5: %d\n",
+			ret);
+		return 0;
+	}
+
+	switch (ret & WM831X_FLL_CLK_SRC_MASK) {
+	case 0:
+		return 0;
+	case 1:
+		return 1;
+	default:
+		dev_err(wm831x->dev, "Unsupported FLL clock source %d\n",
+			ret & WM831X_FLL_CLK_SRC_MASK);
+		return 0;
+	}
+}
+
+static const struct clk_ops wm831x_fll_ops = {
+	.is_enabled = wm831x_fll_is_enabled,
+	.prepare = wm831x_fll_prepare,
+	.unprepare = wm831x_fll_unprepare,
+	.round_rate = wm831x_fll_round_rate,
+	.recalc_rate = wm831x_fll_recalc_rate,
+	.set_rate = wm831x_fll_set_rate,
+	.get_parent = wm831x_fll_get_parent,
+};
+
+static struct clk_init_data wm831x_fll_init = {
+	.name = "fll",
+	.ops = &wm831x_fll_ops,
+	.parent_names = wm831x_fll_parents,
+	.num_parents = ARRAY_SIZE(wm831x_fll_parents),
+	.flags = CLK_SET_RATE_GATE,
+};
+
+static int wm831x_clkout_is_enabled(struct clk_hw *hw)
+{
+	struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+						  clkout_hw);
+	struct wm831x *wm831x = clkdata->wm831x;
+	int ret;
+
+	ret = wm831x_reg_read(wm831x, WM831X_CLOCK_CONTROL_1);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Unable to read CLOCK_CONTROL_1: %d\n",
+			ret);
+		return true;
+	}
+
+	return (ret & WM831X_CLKOUT_ENA) != 0;
+}
+
+static int wm831x_clkout_prepare(struct clk_hw *hw)
+{
+	struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+						  clkout_hw);
+	struct wm831x *wm831x = clkdata->wm831x;
+	int ret;
+
+	ret = wm831x_reg_unlock(wm831x);
+	if (ret != 0) {
+		dev_crit(wm831x->dev, "Failed to lock registers: %d\n", ret);
+		return ret;
+	}
+
+	ret = wm831x_set_bits(wm831x, WM831X_CLOCK_CONTROL_1,
+			      WM831X_CLKOUT_ENA, WM831X_CLKOUT_ENA);
+	if (ret != 0)
+		dev_crit(wm831x->dev, "Failed to enable CLKOUT: %d\n", ret);
+
+	wm831x_reg_lock(wm831x);
+
+	return ret;
+}
+
+static void wm831x_clkout_unprepare(struct clk_hw *hw)
+{
+	struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+						  clkout_hw);
+	struct wm831x *wm831x = clkdata->wm831x;
+	int ret;
+
+	ret = wm831x_reg_unlock(wm831x);
+	if (ret != 0) {
+		dev_crit(wm831x->dev, "Failed to lock registers: %d\n", ret);
+		return;
+	}
+
+	ret = wm831x_set_bits(wm831x, WM831X_CLOCK_CONTROL_1,
+			      WM831X_CLKOUT_ENA, 0);
+	if (ret != 0)
+		dev_crit(wm831x->dev, "Failed to disable CLKOUT: %d\n", ret);
+
+	wm831x_reg_lock(wm831x);
+}
+
+static const char *wm831x_clkout_parents[] = {
+	"xtal",
+	"fll",
+};
+
+static u8 wm831x_clkout_get_parent(struct clk_hw *hw)
+{
+	struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+						  clkout_hw);
+	struct wm831x *wm831x = clkdata->wm831x;
+	int ret;
+
+	ret = wm831x_reg_read(wm831x, WM831X_CLOCK_CONTROL_1);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Unable to read CLOCK_CONTROL_1: %d\n",
+			ret);
+		return 0;
+	}
+
+	if (ret & WM831X_CLKOUT_SRC)
+		return 0;
+	else
+		return 1;
+}
+
+static int wm831x_clkout_set_parent(struct clk_hw *hw, u8 parent)
+{
+	struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk,
+						  clkout_hw);
+	struct wm831x *wm831x = clkdata->wm831x;
+
+	return wm831x_set_bits(wm831x, WM831X_CLOCK_CONTROL_1,
+			       WM831X_CLKOUT_SRC,
+			       parent << WM831X_CLKOUT_SRC_SHIFT);
+}
+
+static const struct clk_ops wm831x_clkout_ops = {
+	.is_enabled = wm831x_clkout_is_enabled,
+	.prepare = wm831x_clkout_prepare,
+	.unprepare = wm831x_clkout_unprepare,
+	.get_parent = wm831x_clkout_get_parent,
+	.set_parent = wm831x_clkout_set_parent,
+};
+
+static struct clk_init_data wm831x_clkout_init = {
+	.name = "clkout",
+	.ops = &wm831x_clkout_ops,
+	.parent_names = wm831x_clkout_parents,
+	.num_parents = ARRAY_SIZE(wm831x_clkout_parents),
+	.flags = CLK_SET_RATE_PARENT,
+};
+
+static __devinit int wm831x_clk_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_clk *clkdata;
+	int ret;
+
+	clkdata = devm_kzalloc(&pdev->dev, sizeof(*clkdata), GFP_KERNEL);
+	if (!clkdata)
+		return -ENOMEM;
+
+	/* XTAL_ENA can only be set via OTP/InstantConfig so just read once */
+	ret = wm831x_reg_read(wm831x, WM831X_CLOCK_CONTROL_2);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Unable to read CLOCK_CONTROL_2: %d\n",
+			ret);
+		return ret;
+	}
+	clkdata->xtal_ena = ret & WM831X_XTAL_ENA;
+
+	clkdata->xtal_hw.init = &wm831x_xtal_init;
+	clkdata->xtal = clk_register(&pdev->dev, &clkdata->xtal_hw);
+	if (!clkdata->xtal)
+		return -EINVAL;
+
+	clkdata->fll_hw.init = &wm831x_fll_init;
+	clkdata->fll = clk_register(&pdev->dev, &clkdata->fll_hw);
+	if (!clkdata->fll) {
+		ret = -EINVAL;
+		goto err_xtal;
+	}
+
+	clkdata->clkout_hw.init = &wm831x_clkout_init;
+	clkdata->clkout = clk_register(&pdev->dev, &clkdata->clkout_hw);
+	if (!clkdata->clkout) {
+		ret = -EINVAL;
+		goto err_fll;
+	}
+
+	dev_set_drvdata(&pdev->dev, clkdata);
+
+	return 0;
+
+err_fll:
+	clk_unregister(clkdata->fll);
+err_xtal:
+	clk_unregister(clkdata->xtal);
+	return ret;
+}
+
+static int __devexit wm831x_clk_remove(struct platform_device *pdev)
+{
+	struct wm831x_clk *clkdata = dev_get_drvdata(&pdev->dev);
+
+	clk_unregister(clkdata->clkout);
+	clk_unregister(clkdata->fll);
+	clk_unregister(clkdata->xtal);
+
+	return 0;
+}
+
+static struct platform_driver wm831x_clk_driver = {
+	.probe = wm831x_clk_probe,
+	.remove = __devexit_p(wm831x_clk_remove),
+	.driver		= {
+		.name	= "wm831x-clk",
+		.owner	= THIS_MODULE,
+	},
+};
+
+module_platform_driver(wm831x_clk_driver);
+
+/* Module information */
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("WM831x clock driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-clk");

drivers/clk/clk.c

@@ -16,6 +16,7 @@
 #include <linux/err.h>
 #include <linux/list.h>
 #include <linux/slab.h>
+#include <linux/of.h>
 
 static DEFINE_SPINLOCK(enable_lock);
 static DEFINE_MUTEX(prepare_lock);
@@ -1235,8 +1236,8 @@ int __clk_init(struct device *dev, struct clk *clk)
 	 * If clk->parents is not NULL we skip this entire block.  This allows
 	 * for clock drivers to statically initialize clk->parents.
 	 */
-	if (clk->num_parents && !clk->parents) {
-		clk->parents = kmalloc((sizeof(struct clk*) * clk->num_parents),
+	if (clk->num_parents > 1 && !clk->parents) {
+		clk->parents = kzalloc((sizeof(struct clk*) * clk->num_parents),
 				GFP_KERNEL);
 		/*
 		 * __clk_lookup returns NULL for parents that have not been
@@ -1550,3 +1551,142 @@ int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb)
 	return ret;
 }
 EXPORT_SYMBOL_GPL(clk_notifier_unregister);
+
+#ifdef CONFIG_OF
+/**
+ * struct of_clk_provider - Clock provider registration structure
+ * @link: Entry in global list of clock providers
+ * @node: Pointer to device tree node of clock provider
+ * @get: Get clock callback.  Returns NULL or a struct clk for the
+ *       given clock specifier
+ * @data: context pointer to be passed into @get callback
+ */
+struct of_clk_provider {
+	struct list_head link;
+
+	struct device_node *node;
+	struct clk *(*get)(struct of_phandle_args *clkspec, void *data);
+	void *data;
+};
+
+static LIST_HEAD(of_clk_providers);
+static DEFINE_MUTEX(of_clk_lock);
+
+struct clk *of_clk_src_simple_get(struct of_phandle_args *clkspec,
+				     void *data)
+{
+	return data;
+}
+EXPORT_SYMBOL_GPL(of_clk_src_simple_get);
+
+/**
+ * of_clk_add_provider() - Register a clock provider for a node
+ * @np: Device node pointer associated with clock provider
+ * @clk_src_get: callback for decoding clock
+ * @data: context pointer for @clk_src_get callback.
+ */
+int of_clk_add_provider(struct device_node *np,
+			struct clk *(*clk_src_get)(struct of_phandle_args *clkspec,
+						   void *data),
+			void *data)
+{
+	struct of_clk_provider *cp;
+
+	cp = kzalloc(sizeof(struct of_clk_provider), GFP_KERNEL);
+	if (!cp)
+		return -ENOMEM;
+
+	cp->node = of_node_get(np);
+	cp->data = data;
+	cp->get = clk_src_get;
+
+	mutex_lock(&of_clk_lock);
+	list_add(&cp->link, &of_clk_providers);
+	mutex_unlock(&of_clk_lock);
+	pr_debug("Added clock from %s\n", np->full_name);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(of_clk_add_provider);
+
+/**
+ * of_clk_del_provider() - Remove a previously registered clock provider
+ * @np: Device node pointer associated with clock provider
+ */
+void of_clk_del_provider(struct device_node *np)
+{
+	struct of_clk_provider *cp;
+
+	mutex_lock(&of_clk_lock);
+	list_for_each_entry(cp, &of_clk_providers, link) {
+		if (cp->node == np) {
+			list_del(&cp->link);
+			of_node_put(cp->node);
+			kfree(cp);
+			break;
+		}
+	}
+	mutex_unlock(&of_clk_lock);
+}
+EXPORT_SYMBOL_GPL(of_clk_del_provider);
+
+struct clk *of_clk_get_from_provider(struct of_phandle_args *clkspec)
+{
+	struct of_clk_provider *provider;
+	struct clk *clk = ERR_PTR(-ENOENT);
+
+	/* Check if we have such a provider in our array */
+	mutex_lock(&of_clk_lock);
+	list_for_each_entry(provider, &of_clk_providers, link) {
+		if (provider->node == clkspec->np)
+			clk = provider->get(clkspec, provider->data);
+		if (!IS_ERR(clk))
+			break;
+	}
+	mutex_unlock(&of_clk_lock);
+
+	return clk;
+}
+
+const char *of_clk_get_parent_name(struct device_node *np, int index)
+{
+	struct of_phandle_args clkspec;
+	const char *clk_name;
+	int rc;
+
+	if (index < 0)
+		return NULL;
+
+	rc = of_parse_phandle_with_args(np, "clocks", "#clock-cells", index,
+					&clkspec);
+	if (rc)
+		return NULL;
+
+	if (of_property_read_string_index(clkspec.np, "clock-output-names",
+					  clkspec.args_count ? clkspec.args[0] : 0,
+					  &clk_name) < 0)
+		clk_name = clkspec.np->name;
+
+	of_node_put(clkspec.np);
+	return clk_name;
+}
+EXPORT_SYMBOL_GPL(of_clk_get_parent_name);
+
+/**
+ * of_clk_init() - Scan and init clock providers from the DT
+ * @matches: array of compatible values and init functions for providers.
+ *
+ * This function scans the device tree for matching clock providers and
+ * calls their initialization functions
+ */
+void __init of_clk_init(const struct of_device_id *matches)
+{
+	struct device_node *np;
+
+	for_each_matching_node(np, matches) {
+		const struct of_device_id *match = of_match_node(matches, np);
+		of_clk_init_cb_t clk_init_cb = match->data;
+		clk_init_cb(np);
+	}
+}
+#endif

drivers/clk/clkdev.c

@@ -19,10 +19,80 @@
 #include <linux/mutex.h>
 #include <linux/clk.h>
 #include <linux/clkdev.h>
+#include <linux/of.h>
 
 static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
 
+#if defined(CONFIG_OF) && defined(CONFIG_COMMON_CLK)
+struct clk *of_clk_get(struct device_node *np, int index)
+{
+	struct of_phandle_args clkspec;
+	struct clk *clk;
+	int rc;
+
+	if (index < 0)
+		return ERR_PTR(-EINVAL);
+
+	rc = of_parse_phandle_with_args(np, "clocks", "#clock-cells", index,
+					&clkspec);
+	if (rc)
+		return ERR_PTR(rc);
+
+	clk = of_clk_get_from_provider(&clkspec);
+	of_node_put(clkspec.np);
+	return clk;
+}
+EXPORT_SYMBOL(of_clk_get);
+
+/**
+ * of_clk_get_by_name() - Parse and lookup a clock referenced by a device node
+ * @np: pointer to clock consumer node
+ * @name: name of consumer's clock input, or NULL for the first clock reference
+ *
+ * This function parses the clocks and clock-names properties,
+ * and uses them to look up the struct clk from the registered list of clock
+ * providers.
+ */
+struct clk *of_clk_get_by_name(struct device_node *np, const char *name)
+{
+	struct clk *clk = ERR_PTR(-ENOENT);
+
+	/* Walk up the tree of devices looking for a clock that matches */
+	while (np) {
+		int index = 0;
+
+		/*
+		 * For named clocks, first look up the name in the
+		 * "clock-names" property.  If it cannot be found, then
+		 * index will be an error code, and of_clk_get() will fail.
+		 */
+		if (name)
+			index = of_property_match_string(np, "clock-names", name);
+		clk = of_clk_get(np, index);
+		if (!IS_ERR(clk))
+			break;
+		else if (name && index >= 0) {
+			pr_err("ERROR: could not get clock %s:%s(%i)\n",
+				np->full_name, name ? name : "", index);
+			return clk;
+		}
+
+		/*
+		 * No matching clock found on this node.  If the parent node
+		 * has a "clock-ranges" property, then we can try one of its
+		 * clocks.
+		 */
+		np = np->parent;
+		if (np && !of_get_property(np, "clock-ranges", NULL))
+			break;
+	}
+
+	return clk;
+}
+EXPORT_SYMBOL(of_clk_get_by_name);
+#endif
+
 /*
  * Find the correct struct clk for the device and connection ID.
  * We do slightly fuzzy matching here:
@@ -83,6 +153,13 @@ EXPORT_SYMBOL(clk_get_sys);
 struct clk *clk_get(struct device *dev, const char *con_id)
 {
 	const char *dev_id = dev ? dev_name(dev) : NULL;
+	struct clk *clk;
+
+	if (dev) {
+		clk = of_clk_get_by_name(dev->of_node, con_id);
+		if (!IS_ERR(clk) && __clk_get(clk))
+			return clk;
+	}
 
 	return clk_get_sys(dev_id, con_id);
 }

drivers/clk/mxs/clk-imx23.c

@@ -106,7 +106,7 @@ static struct clk_lookup lcdif_lookups[] = {
 
 static struct clk_lookup gpmi_lookups[] = {
 	{ .dev_id = "imx23-gpmi-nand", },
-	{ .dev_id = "8000c000.gpmi", },
+	{ .dev_id = "8000c000.gpmi-nand", },
 };
 
 static const char *sel_pll[]  __initconst = { "pll", "ref_xtal", };
@@ -189,6 +189,7 @@ int __init mx23_clocks_init(void)
 		}
 
 	clk_register_clkdev(clks[clk32k], NULL, "timrot");
+	clk_register_clkdev(clks[pwm], NULL, "80064000.pwm");
 	clk_register_clkdevs(clks[hbus], hbus_lookups, ARRAY_SIZE(hbus_lookups));
 	clk_register_clkdevs(clks[xbus], xbus_lookups, ARRAY_SIZE(xbus_lookups));
 	clk_register_clkdevs(clks[uart], uart_lookups, ARRAY_SIZE(uart_lookups));

drivers/clk/mxs/clk-imx28.c

@@ -112,11 +112,11 @@ static void __init clk_misc_init(void)
 
 	/*
 	 * 480 MHz seems too high to be ssp clock source directly,
-	 * so set frac0 to get a 288 MHz ref_io0.
+	 * so set frac0 to get a 288 MHz ref_io0 and ref_io1.
 	 */
 	val = readl_relaxed(FRAC0);
-	val &= ~(0x3f << BP_FRAC0_IO0FRAC);
-	val |= 30 << BP_FRAC0_IO0FRAC;
+	val &= ~((0x3f << BP_FRAC0_IO0FRAC) | (0x3f << BP_FRAC0_IO1FRAC));
+	val |= (30 << BP_FRAC0_IO0FRAC) | (30 << BP_FRAC0_IO1FRAC);
 	writel_relaxed(val, FRAC0);
 }
 
@@ -174,7 +174,7 @@ static struct clk_lookup lcdif_lookups[] = {
 
 static struct clk_lookup gpmi_lookups[] = {
 	{ .dev_id = "imx28-gpmi-nand", },
-	{ .dev_id = "8000c000.gpmi", },
+	{ .dev_id = "8000c000.gpmi-nand", },
 };
 
 static struct clk_lookup fec_lookups[] = {
@@ -314,6 +314,7 @@ int __init mx28_clocks_init(void)
 
 	clk_register_clkdev(clks[clk32k], NULL, "timrot");
 	clk_register_clkdev(clks[enet_out], NULL, "enet_out");
+	clk_register_clkdev(clks[pwm], NULL, "80064000.pwm");
 	clk_register_clkdevs(clks[hbus], hbus_lookups, ARRAY_SIZE(hbus_lookups));
 	clk_register_clkdevs(clks[xbus], xbus_lookups, ARRAY_SIZE(xbus_lookups));
 	clk_register_clkdevs(clks[uart], uart_lookups, ARRAY_SIZE(uart_lookups));
@@ -328,6 +329,10 @@ int __init mx28_clocks_init(void)
 	clk_register_clkdevs(clks[fec], fec_lookups, ARRAY_SIZE(fec_lookups));
 	clk_register_clkdevs(clks[can0], can0_lookups, ARRAY_SIZE(can0_lookups));
 	clk_register_clkdevs(clks[can1], can1_lookups, ARRAY_SIZE(can1_lookups));
+	clk_register_clkdev(clks[usb0_pwr], NULL, "8007c000.usbphy");
+	clk_register_clkdev(clks[usb1_pwr], NULL, "8007e000.usbphy");
+	clk_register_clkdev(clks[usb0], NULL, "80080000.usb");
+	clk_register_clkdev(clks[usb1], NULL, "80090000.usb");
 
 	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
 		clk_prepare_enable(clks[clks_init_on[i]]);

drivers/clk/versatile/Makefile

+# Makefile for Versatile-specific clocks
+obj-$(CONFIG_ICST)		+= clk-icst.o
+obj-$(CONFIG_ARCH_INTEGRATOR)	+= clk-integrator.o

drivers/clk/versatile/clk-icst.c

+/*
+ * Driver for the ICST307 VCO clock found in the ARM Reference designs.
+ * We wrap the custom interface from <asm/hardware/icst.h> into the generic
+ * clock framework.
+ *
+ * TODO: when all ARM reference designs are migrated to generic clocks, the
+ * ICST clock code from the ARM tree should probably be merged into this
+ * file.
+ */
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+
+#include "clk-icst.h"
+
+/**
+ * struct clk_icst - ICST VCO clock wrapper
+ * @hw: corresponding clock hardware entry
+ * @params: parameters for this ICST instance
+ * @rate: current rate
+ * @setvco: function to commit ICST settings to hardware
+ */
+struct clk_icst {
+	struct clk_hw hw;
+	const struct icst_params *params;
+	unsigned long rate;
+	struct icst_vco (*getvco)(void);
+	void (*setvco)(struct icst_vco);
+};
+
+#define to_icst(_hw) container_of(_hw, struct clk_icst, hw)
+
+static unsigned long icst_recalc_rate(struct clk_hw *hw,
+				      unsigned long parent_rate)
+{
+	struct clk_icst *icst = to_icst(hw);
+	struct icst_vco vco;
+
+	vco = icst->getvco();
+	icst->rate = icst_hz(icst->params, vco);
+	return icst->rate;
+}
+
+static long icst_round_rate(struct clk_hw *hw, unsigned long rate,
+			    unsigned long *prate)
+{
+	struct clk_icst *icst = to_icst(hw);
+	struct icst_vco vco;
+
+	vco = icst_hz_to_vco(icst->params, rate);
+	return icst_hz(icst->params, vco);
+}
+
+static int icst_set_rate(struct clk_hw *hw, unsigned long rate,
+			 unsigned long parent_rate)
+{
+	struct clk_icst *icst = to_icst(hw);
+	struct icst_vco vco;
+
+	vco = icst_hz_to_vco(icst->params, rate);
+	icst->rate = icst_hz(icst->params, vco);
+	icst->setvco(vco);
+	return 0;
+}
+
+static const struct clk_ops icst_ops = {
+	.recalc_rate = icst_recalc_rate,
+	.round_rate = icst_round_rate,
+	.set_rate = icst_set_rate,
+};
+
+struct clk * __init icst_clk_register(struct device *dev,
+				      const struct clk_icst_desc *desc)
+{
+	struct clk *clk;
+	struct clk_icst *icst;
+	struct clk_init_data init;
+
+	icst = kzalloc(sizeof(struct clk_icst), GFP_KERNEL);
+	if (!icst) {
+		pr_err("could not allocate ICST clock!\n");
+		return ERR_PTR(-ENOMEM);
+	}
+	init.name = "icst";
+	init.ops = &icst_ops;
+	init.flags = CLK_IS_ROOT;
+	init.parent_names = NULL;
+	init.num_parents = 0;
+	icst->hw.init = &init;
+	icst->params = desc->params;
+	icst->getvco = desc->getvco;
+	icst->setvco = desc->setvco;
+
+	clk = clk_register(dev, &icst->hw);
+	if (IS_ERR(clk))
+		kfree(icst);
+
+	return clk;
+}

drivers/clk/versatile/clk-icst.h

+#include <asm/hardware/icst.h>
+
+struct clk_icst_desc {
+	const struct icst_params *params;
+	struct icst_vco (*getvco)(void);
+	void (*setvco)(struct icst_vco);
+};
+
+struct clk *icst_clk_register(struct device *dev,
+			      const struct clk_icst_desc *desc);

drivers/clk/versatile/clk-integrator.c

+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk-provider.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+
+#include "clk-icst.h"
+
+/*
+ * Implementation of the ARM Integrator/AP and Integrator/CP clock tree.
+ * Inspired by portions of:
+ * plat-versatile/clock.c and plat-versatile/include/plat/clock.h
+ */
+#define CM_LOCK		(__io_address(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET)
+#define CM_AUXOSC	(__io_address(INTEGRATOR_HDR_BASE)+0x1c)
+
+/**
+ * cp_auxvco_get() - get ICST VCO settings for the Integrator/CP
+ * @vco: ICST VCO parameters to update with hardware status
+ */
+static struct icst_vco cp_auxvco_get(void)
+{
+	u32 val;
+	struct icst_vco vco;
+
+	val = readl(CM_AUXOSC);
+	vco.v = val & 0x1ff;
+	vco.r = (val >> 9) & 0x7f;
+	vco.s = (val >> 16) & 03;
+	return vco;
+}
+
+/**
+ * cp_auxvco_set() - commit changes to Integrator/CP ICST VCO
+ * @vco: ICST VCO parameters to commit
+ */
+static void cp_auxvco_set(struct icst_vco vco)
+{
+	u32 val;
+
+	val = readl(CM_AUXOSC) & ~0x7ffff;
+	val |= vco.v | (vco.r << 9) | (vco.s << 16);
+
+	/* This magic unlocks the CM VCO so it can be controlled */
+	writel(0xa05f, CM_LOCK);
+	writel(val, CM_AUXOSC);
+	/* This locks the CM again */
+	writel(0, CM_LOCK);
+}
+
+static const struct icst_params cp_auxvco_params = {
+	.ref		= 24000000,
+	.vco_max	= ICST525_VCO_MAX_5V,
+	.vco_min	= ICST525_VCO_MIN,
+	.vd_min 	= 8,
+	.vd_max 	= 263,
+	.rd_min 	= 3,
+	.rd_max 	= 65,
+	.s2div		= icst525_s2div,
+	.idx2s		= icst525_idx2s,
+};
+
+static const struct clk_icst_desc __initdata cp_icst_desc = {
+	.params = &cp_auxvco_params,
+	.getvco = cp_auxvco_get,
+	.setvco = cp_auxvco_set,
+};
+
+/*
+ * integrator_clk_init() - set up the integrator clock tree
+ * @is_cp: pass true if it's the Integrator/CP else AP is assumed
+ */
+void __init integrator_clk_init(bool is_cp)
+{
+	struct clk *clk;
+
+	/* APB clock dummy */
+	clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
+	clk_register_clkdev(clk, "apb_pclk", NULL);
+
+	/* UART reference clock */
+	clk = clk_register_fixed_rate(NULL, "uartclk", NULL, CLK_IS_ROOT,
+				14745600);
+	clk_register_clkdev(clk, NULL, "uart0");
+	clk_register_clkdev(clk, NULL, "uart1");
+	if (is_cp)
+		clk_register_clkdev(clk, NULL, "mmci");
+
+	/* 24 MHz clock */
+	clk = clk_register_fixed_rate(NULL, "clk24mhz", NULL, CLK_IS_ROOT,
+				24000000);
+	clk_register_clkdev(clk, NULL, "kmi0");
+	clk_register_clkdev(clk, NULL, "kmi1");
+	if (!is_cp)
+		clk_register_clkdev(clk, NULL, "ap_timer");
+
+	if (!is_cp)
+		return;
+
+	/* 1 MHz clock */
+	clk = clk_register_fixed_rate(NULL, "clk1mhz", NULL, CLK_IS_ROOT,
+				1000000);
+	clk_register_clkdev(clk, NULL, "sp804");
+
+	/* ICST VCO clock used on the Integrator/CP CLCD */
+	clk = icst_clk_register(NULL, &cp_icst_desc);
+	clk_register_clkdev(clk, NULL, "clcd");
+}

include/linux/clk-private.h

@@ -64,7 +64,7 @@ struct clk {
 		.parent_names = _parent_names,			\
 		.num_parents = ARRAY_SIZE(_parent_names),	\
 		.parents = _parents,				\
-		.flags = _flags,				\
+		.flags = _flags | CLK_IS_BASIC,			\
 	}
 
 #define DEFINE_CLK_FIXED_RATE(_name, _flags, _rate,		\
@@ -103,9 +103,9 @@ struct clk {
 	DEFINE_CLK(_name, clk_gate_ops, _flags,			\
 			_name##_parent_names, _name##_parents);
 
-#define DEFINE_CLK_DIVIDER(_name, _parent_name, _parent_ptr,	\
+#define _DEFINE_CLK_DIVIDER(_name, _parent_name, _parent_ptr,	\
 				_flags, _reg, _shift, _width,	\
-				_divider_flags, _lock)		\
+				_divider_flags, _table, _lock)	\
 	static struct clk _name;				\
 	static const char *_name##_parent_names[] = {		\
 		_parent_name,					\
@@ -121,11 +121,27 @@ struct clk {
 		.shift = _shift,				\
 		.width = _width,				\
 		.flags = _divider_flags,			\
+		.table = _table,				\
 		.lock = _lock,					\
 	};							\
 	DEFINE_CLK(_name, clk_divider_ops, _flags,		\
 			_name##_parent_names, _name##_parents);
 
+#define DEFINE_CLK_DIVIDER(_name, _parent_name, _parent_ptr,	\
+				_flags, _reg, _shift, _width,	\
+				_divider_flags, _lock)		\
+	_DEFINE_CLK_DIVIDER(_name, _parent_name, _parent_ptr,	\
+				_flags, _reg, _shift, _width,	\
+				_divider_flags, NULL, _lock)
+
+#define DEFINE_CLK_DIVIDER_TABLE(_name, _parent_name,		\
+				_parent_ptr, _flags, _reg,	\
+				_shift, _width, _divider_flags,	\
+				_table, _lock)			\
+	_DEFINE_CLK_DIVIDER(_name, _parent_name, _parent_ptr,	\
+				_flags, _reg, _shift, _width,	\
+				_divider_flags, _table, _lock)	\
+
 #define DEFINE_CLK_MUX(_name, _parent_names, _parents, _flags,	\
 				_reg, _shift, _width,		\
 				_mux_flags, _lock)		\

include/linux/clk-provider.h

@@ -25,6 +25,7 @@
 #define CLK_SET_RATE_PARENT	BIT(2) /* propagate rate change up one level */
 #define CLK_IGNORE_UNUSED	BIT(3) /* do not gate even if unused */
 #define CLK_IS_ROOT		BIT(4) /* root clk, has no parent */
+#define CLK_IS_BASIC		BIT(5) /* Basic clk, can't do a to_clk_foo() */
 
 struct clk_hw;
 
@@ -143,7 +144,7 @@ struct clk_init_data {
  */
 struct clk_hw {
 	struct clk *clk;
-	struct clk_init_data *init;
+	const struct clk_init_data *init;
 };
 
 /*
@@ -171,6 +172,8 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
 		const char *parent_name, unsigned long flags,
 		unsigned long fixed_rate);
 
+void of_fixed_clk_setup(struct device_node *np);
+
 /**
  * struct clk_gate - gating clock
  *
@@ -203,6 +206,11 @@ struct clk *clk_register_gate(struct device *dev, const char *name,
 		void __iomem *reg, u8 bit_idx,
 		u8 clk_gate_flags, spinlock_t *lock);
 
+struct clk_div_table {
+	unsigned int	val;
+	unsigned int	div;
+};
+
 /**
  * struct clk_divider - adjustable divider clock
  *
@@ -210,6 +218,7 @@ struct clk *clk_register_gate(struct device *dev, const char *name,
  * @reg:	register containing the divider
  * @shift:	shift to the divider bit field
  * @width:	width of the divider bit field
+ * @table:	array of value/divider pairs, last entry should have div = 0
  * @lock:	register lock
  *
  * Clock with an adjustable divider affecting its output frequency.  Implements
@@ -229,6 +238,7 @@ struct clk_divider {
 	u8		shift;
 	u8		width;
 	u8		flags;
+	const struct clk_div_table	*table;
 	spinlock_t	*lock;
 };
 
@@ -240,6 +250,11 @@ struct clk *clk_register_divider(struct device *dev, const char *name,
 		const char *parent_name, unsigned long flags,
 		void __iomem *reg, u8 shift, u8 width,
 		u8 clk_divider_flags, spinlock_t *lock);
+struct clk *clk_register_divider_table(struct device *dev, const char *name,
+		const char *parent_name, unsigned long flags,
+		void __iomem *reg, u8 shift, u8 width,
+		u8 clk_divider_flags, const struct clk_div_table *table,
+		spinlock_t *lock);
 
 /**
  * struct clk_mux - multiplexer clock
@@ -334,5 +349,19 @@ void __clk_unprepare(struct clk *clk);
 void __clk_reparent(struct clk *clk, struct clk *new_parent);
 unsigned long __clk_round_rate(struct clk *clk, unsigned long rate);
 
+struct of_device_id;
+
+typedef void (*of_clk_init_cb_t)(struct device_node *);
+
+int of_clk_add_provider(struct device_node *np,
+			struct clk *(*clk_src_get)(struct of_phandle_args *args,
+						   void *data),
+			void *data);
+void of_clk_del_provider(struct device_node *np);
+struct clk *of_clk_src_simple_get(struct of_phandle_args *clkspec,
+				  void *data);
+const char *of_clk_get_parent_name(struct device_node *np, int index);
+void of_clk_init(const struct of_device_id *matches);
+
 #endif /* CONFIG_COMMON_CLK */
 #endif /* CLK_PROVIDER_H */

include/linux/clk.h

@@ -12,6 +12,7 @@
 #ifndef __LINUX_CLK_H
 #define __LINUX_CLK_H
 
+#include <linux/err.h>
 #include <linux/kernel.h>
 #include <linux/notifier.h>
 
@@ -310,4 +311,23 @@ struct clk *clk_get_sys(const char *dev_id, const char *con_id);
 int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
 			struct device *dev);
 
+struct device_node;
+struct of_phandle_args;
+
+#if defined(CONFIG_OF) && defined(CONFIG_COMMON_CLK)
+struct clk *of_clk_get(struct device_node *np, int index);
+struct clk *of_clk_get_by_name(struct device_node *np, const char *name);
+struct clk *of_clk_get_from_provider(struct of_phandle_args *clkspec);
+#else
+static inline struct clk *of_clk_get(struct device_node *np, int index)
+{
+	return ERR_PTR(-ENOENT);
+}
+static inline struct clk *of_clk_get_by_name(struct device_node *np,
+					     const char *name)
+{
+	return ERR_PTR(-ENOENT);
+}
+#endif
+
 #endif

include/linux/platform_data/clk-integrator.h

+void integrator_clk_init(bool is_cp);

include/linux/platform_data/clk-u300.h

+void __init u300_clk_init(void __iomem *base);