提交 8e8a5516 编写于 作者: V Virupax Sadashivpetimath 提交者: Felipe Balbi

usb: musb: host: Handle highmem in PIO mode

In case of USB bulk transfer, when himem page
is received, the usb_sg_init function sets the
urb transfer buffer to NULL. When such URB
transfer is handled, kernel crashes in PIO mode.
Handle this by mapping the highmem buffer in PIO mode.
Signed-off-by: NVirupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
Signed-off-by: NPraveena NADAHALLY <praveen.nadahally@stericsson.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
上级 decadacb
......@@ -823,9 +823,28 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
if (load_count) {
/* PIO to load FIFO */
qh->segsize = load_count;
if (!buf) {
sg_miter_start(&qh->sg_miter, urb->sg, 1,
SG_MITER_ATOMIC
| SG_MITER_FROM_SG);
if (!sg_miter_next(&qh->sg_miter)) {
dev_err(musb->controller,
"error: sg"
"list empty\n");
sg_miter_stop(&qh->sg_miter);
goto finish;
}
buf = qh->sg_miter.addr + urb->sg->offset +
urb->actual_length;
load_count = min_t(u32, load_count,
qh->sg_miter.length);
musb_write_fifo(hw_ep, load_count, buf);
qh->sg_miter.consumed = load_count;
sg_miter_stop(&qh->sg_miter);
} else
musb_write_fifo(hw_ep, load_count, buf);
}
finish:
/* re-enable interrupt */
musb_writew(mbase, MUSB_INTRTXE, int_txe);
......@@ -1193,6 +1212,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
void __iomem *mbase = musb->mregs;
struct dma_channel *dma;
bool transfer_pending = false;
static bool use_sg;
musb_ep_select(mbase, epnum);
tx_csr = musb_readw(epio, MUSB_TXCSR);
......@@ -1247,6 +1267,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
return;
}
done:
if (status) {
if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
dma->status = MUSB_DMA_STATUS_CORE_ABORT;
......@@ -1416,9 +1437,38 @@ void musb_host_tx(struct musb *musb, u8 epnum)
length = qh->maxpacket;
/* Unmap the buffer so that CPU can use it */
usb_hcd_unmap_urb_for_dma(musb_to_hcd(musb), urb);
/*
* We need to map sg if the transfer_buffer is
* NULL.
*/
if (!urb->transfer_buffer)
use_sg = true;
if (use_sg) {
/* sg_miter_start is already done in musb_ep_program */
if (!sg_miter_next(&qh->sg_miter)) {
dev_err(musb->controller, "error: sg list empty\n");
sg_miter_stop(&qh->sg_miter);
status = -EINVAL;
goto done;
}
urb->transfer_buffer = qh->sg_miter.addr;
length = min_t(u32, length, qh->sg_miter.length);
musb_write_fifo(hw_ep, length, urb->transfer_buffer);
qh->sg_miter.consumed = length;
sg_miter_stop(&qh->sg_miter);
} else {
musb_write_fifo(hw_ep, length, urb->transfer_buffer + offset);
}
qh->segsize = length;
if (use_sg) {
if (offset + length >= urb->transfer_buffer_length)
use_sg = false;
}
musb_ep_select(mbase, epnum);
musb_writew(epio, MUSB_TXCSR,
MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
......@@ -1482,6 +1532,8 @@ void musb_host_rx(struct musb *musb, u8 epnum)
bool done = false;
u32 status;
struct dma_channel *dma;
static bool use_sg;
unsigned int sg_flags = SG_MITER_ATOMIC | SG_MITER_TO_SG;
musb_ep_select(mbase, epnum);
......@@ -1796,10 +1848,43 @@ void musb_host_rx(struct musb *musb, u8 epnum)
#endif /* Mentor DMA */
if (!dma) {
unsigned int received_len;
/* Unmap the buffer so that CPU can use it */
usb_hcd_unmap_urb_for_dma(musb_to_hcd(musb), urb);
/*
* We need to map sg if the transfer_buffer is
* NULL.
*/
if (!urb->transfer_buffer) {
use_sg = true;
sg_miter_start(&qh->sg_miter, urb->sg, 1,
sg_flags);
}
if (use_sg) {
if (!sg_miter_next(&qh->sg_miter)) {
dev_err(musb->controller, "error: sg list empty\n");
sg_miter_stop(&qh->sg_miter);
status = -EINVAL;
done = true;
goto finish;
}
urb->transfer_buffer = qh->sg_miter.addr;
received_len = urb->actual_length;
qh->offset = 0x0;
done = musb_host_packet_rx(musb, urb, epnum,
iso_err);
/* Calculate the number of bytes received */
received_len = urb->actual_length -
received_len;
qh->sg_miter.consumed = received_len;
sg_miter_stop(&qh->sg_miter);
} else {
done = musb_host_packet_rx(musb, urb,
epnum, iso_err);
}
dev_dbg(musb->controller, "read %spacket\n", done ? "last " : "");
}
}
......@@ -1808,6 +1893,9 @@ void musb_host_rx(struct musb *musb, u8 epnum)
urb->actual_length += xfer_len;
qh->offset += xfer_len;
if (done) {
if (use_sg)
use_sg = false;
if (urb->status == -EINPROGRESS)
urb->status = status;
musb_advance_schedule(musb, urb, hw_ep, USB_DIR_IN);
......
......@@ -35,6 +35,8 @@
#ifndef _MUSB_HOST_H
#define _MUSB_HOST_H
#include <linux/scatterlist.h>
static inline struct usb_hcd *musb_to_hcd(struct musb *musb)
{
return container_of((void *) musb, struct usb_hcd, hcd_priv);
......@@ -71,6 +73,7 @@ struct musb_qh {
u16 maxpacket;
u16 frame; /* for periodic schedule */
unsigned iso_idx; /* in urb->iso_frame_desc[] */
struct sg_mapping_iter sg_miter; /* for highmem in PIO mode */
};
/* map from control or bulk queue head to the first qh on that ring */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册