提交 8e267f3d 编写于 作者: G Grant Likely

arm/dt: tegra devicetree support

Everything required to populate NVIDIA Tegra devices from the device
tree.  This patch adds a new DT_MACHINE_DESC() which matches against
a tegra20 device tree.  So far it only registers the on-chip devices,
but it will be refined in follow on patches to configure clocks and
pin IO from the device tree also.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
上级 3ba7222a
/dts-v1/;
/memreserve/ 0x1c000000 0x04000000;
/include/ "tegra20.dtsi"
/ {
model = "NVIDIA Tegra2 Harmony evaluation board";
compatible = "nvidia,harmony", "nvidia,tegra20";
chosen {
bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/mmcblk0p2 rw rootwait";
};
memory@0 {
reg = < 0x00000000 0x40000000 >;
};
i2c@7000c000 {
clock-frequency = <400000>;
codec: wm8903@1a {
compatible = "wlf,wm8903";
reg = <0x1a>;
interrupts = < 347 >;
gpio-controller;
#gpio-cells = <2>;
/* 0x8000 = Not configured */
gpio-cfg = < 0x8000 0x8000 0 0x8000 0x8000 >;
};
};
i2c@7000c400 {
clock-frequency = <400000>;
};
i2c@7000c500 {
clock-frequency = <400000>;
};
i2c@7000d000 {
clock-frequency = <400000>;
};
sound {
compatible = "nvidia,harmony-sound", "nvidia,tegra-wm8903";
spkr-en-gpios = <&codec 2 0>;
hp-det-gpios = <&gpio 178 0>;
int-mic-en-gpios = <&gpio 184 0>;
ext-mic-en-gpios = <&gpio 185 0>;
};
serial@70006300 {
clock-frequency = < 216000000 >;
};
sdhci@c8000200 {
gpios = <&gpio 69 0>, /* cd, gpio PI5 */
<&gpio 57 0>, /* wp, gpio PH1 */
<&gpio 155 0>; /* power, gpio PT3 */
};
sdhci@c8000600 {
gpios = <&gpio 58 0>, /* cd, gpio PH2 */
<&gpio 59 0>, /* wp, gpio PH3 */
<&gpio 70 0>; /* power, gpio PI6 */
};
};
/dts-v1/;
/memreserve/ 0x1c000000 0x04000000;
/include/ "tegra20.dtsi"
/ {
model = "NVIDIA Seaboard";
compatible = "nvidia,seaboard", "nvidia,tegra20";
chosen {
bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/mmcblk1p3 rw rootwait";
};
memory {
device_type = "memory";
reg = < 0x00000000 0x40000000 >;
};
serial@70006300 {
clock-frequency = < 216000000 >;
};
sdhci@c8000400 {
gpios = <&gpio 69 0>, /* cd, gpio PI5 */
<&gpio 57 0>, /* wp, gpio PH1 */
<&gpio 70 0>; /* power, gpio PI6 */
};
};
/include/ "skeleton.dtsi"
/ {
compatible = "nvidia,tegra20";
interrupt-parent = <&intc>;
intc: interrupt-controller@50041000 {
compatible = "nvidia,tegra20-gic";
interrupt-controller;
#interrupt-cells = <1>;
reg = < 0x50041000 0x1000 >,
< 0x50040100 0x0100 >;
};
i2c@7000c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "nvidia,tegra20-i2c";
reg = <0x7000C000 0x100>;
interrupts = < 70 >;
};
i2c@7000c400 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "nvidia,tegra20-i2c";
reg = <0x7000C400 0x100>;
interrupts = < 116 >;
};
i2c@7000c500 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "nvidia,tegra20-i2c";
reg = <0x7000C500 0x100>;
interrupts = < 124 >;
};
i2c@7000d000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "nvidia,tegra20-i2c";
reg = <0x7000D000 0x200>;
interrupts = < 85 >;
};
i2s@70002800 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "nvidia,tegra20-i2s";
reg = <0x70002800 0x200>;
interrupts = < 45 >;
dma-channel = < 2 >;
};
i2s@70002a00 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "nvidia,tegra20-i2s";
reg = <0x70002a00 0x200>;
interrupts = < 35 >;
dma-channel = < 1 >;
};
das@70000c00 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "nvidia,tegra20-das";
reg = <0x70000c00 0x80>;
};
gpio: gpio@6000d000 {
compatible = "nvidia,tegra20-gpio";
reg = < 0x6000d000 0x1000 >;
interrupts = < 64 65 66 67 87 119 121 >;
#gpio-cells = <2>;
gpio-controller;
};
serial@70006000 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006000 0x40>;
reg-shift = <2>;
interrupts = < 68 >;
};
serial@70006040 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006040 0x40>;
reg-shift = <2>;
interrupts = < 69 >;
};
serial@70006200 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006200 0x100>;
reg-shift = <2>;
interrupts = < 78 >;
};
serial@70006300 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006300 0x100>;
reg-shift = <2>;
interrupts = < 122 >;
};
serial@70006400 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006400 0x100>;
reg-shift = <2>;
interrupts = < 123 >;
};
sdhci@c8000000 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000000 0x200>;
interrupts = < 46 >;
};
sdhci@c8000200 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000200 0x200>;
interrupts = < 47 >;
};
sdhci@c8000400 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000400 0x200>;
interrupts = < 51 >;
};
sdhci@c8000600 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000600 0x200>;
interrupts = < 63 >;
};
};
...@@ -51,6 +51,12 @@ config MACH_SEABOARD ...@@ -51,6 +51,12 @@ config MACH_SEABOARD
also be included for some of the derivative boards that also be included for some of the derivative boards that
have large similarities with the seaboard design. have large similarities with the seaboard design.
config MACH_TEGRA_DT
bool "Generic Tegra board (FDT support)"
select USE_OF
help
Support for generic nVidia Tegra boards using Flattened Device Tree
config MACH_TRIMSLICE config MACH_TRIMSLICE
bool "TrimSlice board" bool "TrimSlice board"
select TEGRA_PCI select TEGRA_PCI
......
...@@ -29,5 +29,8 @@ obj-${CONFIG_MACH_PAZ00} += board-paz00-pinmux.o ...@@ -29,5 +29,8 @@ obj-${CONFIG_MACH_PAZ00} += board-paz00-pinmux.o
obj-${CONFIG_MACH_SEABOARD} += board-seaboard.o obj-${CONFIG_MACH_SEABOARD} += board-seaboard.o
obj-${CONFIG_MACH_SEABOARD} += board-seaboard-pinmux.o obj-${CONFIG_MACH_SEABOARD} += board-seaboard-pinmux.o
obj-${CONFIG_MACH_TEGRA_DT} += board-dt.o
obj-${CONFIG_MACH_TEGRA_DT} += board-harmony-pinmux.o
obj-${CONFIG_MACH_TRIMSLICE} += board-trimslice.o obj-${CONFIG_MACH_TRIMSLICE} += board-trimslice.o
obj-${CONFIG_MACH_TRIMSLICE} += board-trimslice-pinmux.o obj-${CONFIG_MACH_TRIMSLICE} += board-trimslice-pinmux.o
zreladdr-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00008000 zreladdr-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00008000
params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00000100 params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00000100
initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00800000 initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00800000
dtb-$(CONFIG_MACH_HARMONY) += tegra-harmony.dtb
dtb-$(CONFIG_MACH_SEABOARD) += tegra-seaboard.dtb
/*
* nVidia Tegra device tree board support
*
* Copyright (C) 2010 Secret Lab Technologies, Ltd.
* Copyright (C) 2010 Google, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/irqdomain.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_fdt.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/pda_power.h>
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/i2c-tegra.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/setup.h>
#include <mach/iomap.h>
#include <mach/irqs.h>
#include "board.h"
#include "board-harmony.h"
#include "clock.h"
#include "devices.h"
void harmony_pinmux_init(void);
void seaboard_pinmux_init(void);
struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC1_BASE, "sdhci-tegra.0", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC2_BASE, "sdhci-tegra.1", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC3_BASE, "sdhci-tegra.2", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC4_BASE, "sdhci-tegra.3", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-i2c", TEGRA_I2C_BASE, "tegra-i2c.0", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-i2c", TEGRA_I2C2_BASE, "tegra-i2c.1", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-i2c", TEGRA_I2C3_BASE, "tegra-i2c.2", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-i2c", TEGRA_DVC_BASE, "tegra-i2c.3", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-i2s", TEGRA_I2S1_BASE, "tegra-i2s.0", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-i2s", TEGRA_I2S1_BASE, "tegra-i2s.1", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-das", TEGRA_APB_MISC_DAS_BASE, "tegra-das", NULL),
{}
};
static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = {
/* name parent rate enabled */
{ "uartd", "pll_p", 216000000, true },
{ NULL, NULL, 0, 0},
};
static struct of_device_id tegra_dt_match_table[] __initdata = {
{ .compatible = "simple-bus", },
{}
};
static struct of_device_id tegra_dt_gic_match[] __initdata = {
{ .compatible = "nvidia,tegra20-gic", },
{}
};
static void __init tegra_dt_init(void)
{
struct device_node *node;
node = of_find_matching_node_by_address(NULL, tegra_dt_gic_match,
TEGRA_ARM_INT_DIST_BASE);
if (node)
irq_domain_add_simple(node, INT_GIC_BASE);
tegra_clk_init_from_table(tegra_dt_clk_init_table);
if (of_machine_is_compatible("nvidia,harmony"))
harmony_pinmux_init();
else if (of_machine_is_compatible("nvidia,seaboard"))
seaboard_pinmux_init();
/*
* Finished with the static registrations now; fill in the missing
* devices
*/
of_platform_populate(NULL, tegra_dt_match_table, tegra20_auxdata_lookup, NULL);
}
static const char * tegra_dt_board_compat[] = {
"nvidia,harmony",
"nvidia,seaboard",
NULL
};
DT_MACHINE_START(TEGRA_DT, "nVidia Tegra (Flattened Device Tree)")
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
.init_irq = tegra_init_irq,
.timer = &tegra_timer,
.init_machine = tegra_dt_init,
.dt_compat = tegra_dt_board_compat,
MACHINE_END
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册