提交 8a343872 编写于 作者: A Alexandre Torgue 提交者: Zheng Zengkai

ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards

stable inclusion
from stable-5.10.53
commit bfbc4b482078071abbb0515d8a0ba51255ebc414
bugzilla: 175574 https://gitee.com/openeuler/kernel/issues/I4DTUX

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=bfbc4b482078071abbb0515d8a0ba51255ebc414

--------------------------------

[ Upstream commit bf24b91f ]

Fix following warning observed with "make dtbs_check W=1" command.
It concerns f429 eval and disco boards, f769 disco board.

Warning (unit_address_vs_reg): /gpio_keys/button@0: node has a unit name,
but no reg or ranges property
Signed-off-by: NAlexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
上级 bbc28b79
...@@ -119,17 +119,15 @@ ...@@ -119,17 +119,15 @@
}; };
}; };
gpio_keys { gpio-keys {
compatible = "gpio-keys"; compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
autorepeat; autorepeat;
button@0 { button-0 {
label = "Wake up"; label = "Wake up";
linux,code = <KEY_WAKEUP>; linux,code = <KEY_WAKEUP>;
gpios = <&gpioa 0 0>; gpios = <&gpioa 0 0>;
}; };
button@1 { button-1 {
label = "Tamper"; label = "Tamper";
linux,code = <KEY_RESTART>; linux,code = <KEY_RESTART>;
gpios = <&gpioc 13 0>; gpios = <&gpioc 13 0>;
......
...@@ -81,12 +81,10 @@ ...@@ -81,12 +81,10 @@
}; };
}; };
gpio_keys { gpio-keys {
compatible = "gpio-keys"; compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
autorepeat; autorepeat;
button@0 { button-0 {
label = "Wake up"; label = "Wake up";
linux,code = <KEY_WAKEUP>; linux,code = <KEY_WAKEUP>;
gpios = <&gpioc 13 0>; gpios = <&gpioc 13 0>;
......
...@@ -81,12 +81,10 @@ ...@@ -81,12 +81,10 @@
}; };
}; };
gpio_keys { gpio-keys {
compatible = "gpio-keys"; compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
autorepeat; autorepeat;
button@0 { button-0 {
label = "User"; label = "User";
linux,code = <KEY_HOME>; linux,code = <KEY_HOME>;
gpios = <&gpioa 0 0>; gpios = <&gpioa 0 0>;
......
...@@ -104,12 +104,10 @@ ...@@ -104,12 +104,10 @@
}; };
}; };
gpio_keys { gpio-keys {
compatible = "gpio-keys"; compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
autorepeat; autorepeat;
button@0 { button-0 {
label = "User"; label = "User";
linux,code = <KEY_WAKEUP>; linux,code = <KEY_WAKEUP>;
gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>; gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>;
......
...@@ -75,12 +75,10 @@ ...@@ -75,12 +75,10 @@
}; };
}; };
gpio_keys { gpio-keys {
compatible = "gpio-keys"; compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
autorepeat; autorepeat;
button@0 { button-0 {
label = "User"; label = "User";
linux,code = <KEY_HOME>; linux,code = <KEY_HOME>;
gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>; gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册