From 866a05038481d77cac6fc0186250b4c44e691b42 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Tue, 25 Mar 2008 14:12:45 +0100 Subject: [PATCH] rt2x00: Fix rate detection for invalid signals It has been observed on rt2500pci hardware that some frames received with signal 0x0C do not have the OFDM flag set. Signals can have 2 meanings: 1) The PLCP value 2) The bitrate * 10 For rt2500pci (1) is for frames received with a OFDM rate, and (2) is for frames received with a CCK rate. But 0x0C is a invalid bitrate value but is a valid PLCP value for 54Mbs (obvious OFDM rate). This means that it is possible that the hardware does not set the OFDM bit correctly under all circumstances. This results in rt2x00 failing to detect the rate and mac80211 triggering a WARN_ON() and dropping the frame. To bypass this, print a warning when such a frame is received, and reset the rate to the lowest supported rate for the current band. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00dev.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 4fd0c25aebf3..f52e92512f90 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -589,6 +589,13 @@ void rt2x00lib_rxdone(struct queue_entry *entry, } } + if (idx < 0) { + WARNING(rt2x00dev, "Frame received with unrecognized signal," + "signal=0x%.2x, plcp=%d.\n", rxdesc->signal, + !!(rxdesc->dev_flags & RXDONE_SIGNAL_PLCP)); + idx = 0; + } + /* * Only update link status if this is a beacon frame carrying our bssid. */ -- GitLab